The information in this literature is intended to be of a general nature only.

Iveco reserves the right to modify or change specification at any time.

EURO 3 M.Y. 2016

TECHNICAL DESCRIPTION

ML 180E28-E3 - Rigid 4x2

11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension
LIST OF LINKED VCB

VCB code Gearbox Wheelbase Cabin Drive

Z9NAC4C1 6S 1000 TO 3690 MLC-NM SX LH
Z9NAC4CA 6S 1000 TO 3690 MLC-NM DX RH
Z9NAC4F1 9S 1110 TO 3690 MLC-NM SX LH
Z9NAC4FA 9S 1110 TO 3690 MLC-NM DX RH
Z9NAC4T1 3000 3690 MLC-NM SX LH
Z9NAC4TA 3000 3690 MLC-NM DX RH
Z9NAC5C1 6S 1000 TO 4185 MLC-NM SX LH
Z9NAC5C2 6S 1000 TO 4185 MLL-NM SX LH
Z9NAC5CA 6S 1000 TO 4185 MLC-NM DX RH
Z9NAC5CB 6S 1000 TO 4185 MLL-NM DX RH
Z9NAC5F1 9S 1110 TO 4185 MLC-NM SX LH
Z9NAC5F2 9S 1110 TO 4185 MLL-NM SX LH
Z9NAC5FA 9S 1110 TO 4185 MLC-NM DX RH
Z9NAC5FB 9S 1110 TO 4185 MLL-NM DX RH
Z9NAC5T1 3000 4185 MLC-NM SX LH
Z9NAC5T2 3000 4185 MLL-NM SX LH
Z9NAC5TA 3000 4185 MLC-NM DX RH
Z9NAC5TB 3000 4185 MLL-NM DX RH
Z9NAC6C1 6S 1000 TO 4590 MLC-NM SX LH
Z9NAC6C2 6S 1000 TO 4590 MLL-NM SX LH
Z9NAC6CA 6S 1000 TO 4590 MLC-NM DX RH
Z9NAC6CB 6S 1000 TO 4590 MLL-NM DX RH
Z9NAC6F1 9S 1110 TO 4590 MLC-NM SX LH
Z9NAC6F2 9S 1110 TO 4590 MLL-NM SX LH
Z9NAC6FA 9S 1110 TO 4590 MLC-NM DX RH
Z9NAC6FB 9S 1110 TO 4590 MLL-NM DX RH
Z9NAC6T1 3000 4590 MLC-NM SX LH
Z9NAC6T2 3000 4590 MLL-NM SX LH
Z9NAC6TA 3000 4590 MLC-NM DX RH
Z9NAC6TB 3000 4590 MLL-NM DX RH
Z9NAC7C1 6S 1000 TO 4815 MLC-NM SX LH
Z9NAC7C2 6S 1000 TO 4815 MLL-NM SX LH
Z9NAC7CA 6S 1000 TO 4815 MLC-NM DX RH
Z9NAC7CB 6S 1000 TO 4815 MLL-NM DX RH
Z9NAC7F1 9S 1110 TO 4815 MLC-NM SX LH
Z9NAC7F2 9S 1110 TO 4815 MLL-NM SX LH
Z9NAC7FA 9S 1110 TO 4815 MLC-NM DX RH
Z9NAC7FB 9S 1110 TO 4815 MLL-NM DX RH
Z9NAC7T1 3000 4815 MLC-NM SX LH
Z9NAC7T2 3000 4815 MLL-NM SX LH
Z9NAC7TA 3000 4815 MLC-NM DX RH
Z9NAC7TB 3000 4815 MLL-NM DX RH

2 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension
LIST OF LINKED VCB

Z9NAC8C1 6S 1000 TO 5175 MLC-NM SX LH

Z9NAC8C2 6S 1000 TO 5175 MLL-NM SX LH
Z9NAC8CA 6S 1000 TO 5175 MLC-NM DX RH
Z9NAC8CB 6S 1000 TO 5175 MLL-NM DX RH
Z9NAC8F1 9S 1110 TO 5175 MLC-NM SX LH
Z9NAC8F2 9S 1110 TO 5175 MLL-NM SX LH
Z9NAC8FA 9S 1110 TO 5175 MLC-NM DX RH
Z9NAC8FB 9S 1110 TO 5175 MLL-NM DX RH
Z9NAC8T1 3000 5175 MLC-NM SX LH
Z9NAC8T2 3000 5175 MLL-NM SX LH
Z9NAC8TA 3000 5175 MLC-NM DX RH
Z9NAC8TB 3000 5175 MLL-NM DX RH
Z9NAC9C1 6S 1000 TO 5670 MLC-NM SX LH
Z9NAC9C2 6S 1000 TO 5670 MLL-NM SX LH
Z9NAC9CA 6S 1000 TO 5670 MLC-NM DX RH
Z9NAC9CB 6S 1000 TO 5670 MLL-NM DX RH
Z9NAC9F1 9S 1110 TO 5670 MLC-NM SX LH
Z9NAC9F2 9S 1110 TO 5670 MLL-NM SX LH
Z9NAC9FA 9S 1110 TO 5670 MLC-NM DX RH
Z9NAC9FB 9S 1110 TO 5670 MLL-NM DX RH
Z9NAC9T1 3000 5670 MLC-NM SX LH
Z9NAC9T2 3000 5670 MLL-NM SX LH
Z9NAC9TA 3000 5670 MLC-NM DX RH
Z9NAC9TB 3000 5670 MLL-NM DX RH
Z9NACAC1 6S 1000 TO 6210 MLC-NM SX LH
Z9NACAC2 6S 1000 TO 6210 MLL-NM SX LH
Z9NACACA 6S 1000 TO 6210 MLC-NM DX RH
Z9NACACB 6S 1000 TO 6210 MLL-NM DX RH
Z9NACAF1 9S 1110 TO 6210 MLC-NM SX LH
Z9NACAF2 9S 1110 TO 6210 MLL-NM SX LH
Z9NACAFA 9S 1110 TO 6210 MLC-NM DX RH
Z9NACAFB 9S 1110 TO 6210 MLL-NM DX RH
Z9NACAT1 3000 6210 MLC-NM SX LH
Z9NACAT2 3000 6210 MLL-NM SX LH
Z9NACATA 3000 6210 MLC-NM DX RH
Z9NACATB 3000 6210 MLL-NM DX RH
Z9NACBC1 6S 1000 TO 6570 MLC-NM SX LH
Z9NACBC2 6S 1000 TO 6570 MLL-NM SX LH
Z9NACBCA 6S 1000 TO 6570 MLC-NM DX RH
Z9NACBCB 6S 1000 TO 6570 MLL-NM DX RH
Z9NACBF1 9S 1110 TO 6570 MLC-NM SX LH
Z9NACBF2 9S 1110 TO 6570 MLL-NM SX LH
Z9NACBFA 9S 1110 TO 6570 MLC-NM DX RH

3 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension
LIST OF LINKED VCB

Z9NACBFB 9S 1110 TO 6570 MLL-NM DX RH

Z9NACBT1 3000 6570 MLC-NM SX LH
Z9NACBT2 3000 6570 MLL-NM SX LH
Z9NACBTA 3000 6570 MLC-NM DX RH
Z9NACBTB 3000 6570 MLL-NM DX RH

4 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

DIMENSIONS & WEIGHTS

DIMENSIONS (MM)
Wheelbase (A) 3690 4185 4590 4815 5175 5670 6210 6570 4185 4590 4815 5175 5670 6210 6570
MLC MLC MLC MLC MLC MLC MLC MLC MLL MLL MLL MLL MLL MLL MLL

Max length (B) 6279 6954 7696 8124 8754 9361 9901 10801 6954 7696 8124 8754 9361 9901 10801
Max width over wings (cab) (E) 2390 2390 2390 2390 2390 2390 2390 2390 2390 2390 2390 2390 2390 2390 2390
Overall width (rear tyres) (E2) 2470 2470 2470 2470 2470 2470 2470 2470 2470 2470 2470 2470 2470 2470 2470
Front axle to front of body (H) 620 620 620 620 620 620 620 620 620 985 985 985 985 985 985
Frame height at end of frame, 1081 1081 1084 1085 1085 1084 1081 1083 1082 1085 1086 1087 1085 1082 1084
unladen (L)
Frame height at front axle, unladen 1025 1022 1022 1021 1020 1018 1017 1016 1018 1018 1017 1016 1014 1012 1012
Frame height at rear axle, unladen 1068 1067 1067 1067 1066 1065 1064 1063 1067 1067 1067 1066 1065 1064 1063
Rear overhang (D) 1133 1313 1650 1853 2123 2235 2235 2775 1313 1650 1853 2123 2235 2235 2775
Minimum ground clearance (front) 235 235 235 235 235 235 235 235 235 235 235 235 235 235 235
(P)
Minimum ground clearance (rear) 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232
(Q)
Overall height to top of cab, 2845 2842 2842 2841 2840 2838 2837 2836 2838 2838 2837 2836 2834 2833 2832
unladen (K)
Turning diameter kerb to kerb 13190 14690 15920 16600 17700 19200 20800 21900 14690 15920 16600 17700 19200 20800 21900

5 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension
Turning diameter wall to wall 14390 15900 17130 17810 18910 20420 22110 23210 15900 17130 17810 18910 20420 22110 23210
Front track (M) 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985
Rear track (N) 1820 1820 1820 1820 1820 1820 1820 1820 1820 1820 1820 1820 1820 1820 1820
Approach angle (°) 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Front ovehang (C) 1362 1362 1362 1362 1362 1362 1362 1362 1362 1362 1362 1362 1362 1362 1362
Departure angle (°) 16 14 11 10 9 8 8 7 14 11 10 9 8 8 7
Ramp angle (°) 19 16 14 14 13 12 11 11 16 14 14 13 12 11 11
Side members thickness 6 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7
Side members max height 274.5 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9 277.9
Flange width 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80
Frame width at rear 840 840 840 840 840 840 840 840 840 840 840 840 840 840 840

WEIGHTS (KG)
Wheelbase 3690 4185 4590 4815 5175 5670 6210 6570 4185 4590 4815 5175 5670 6210 6570
MLC MLC MLC MLC MLC MLC MLC MLC MLL MLL MLL MLL MLL MLL MLL

Total vehicle kerb weight 5320 5430 5440 5490 5540 5655 5755 6815 5560 5570 5620 5670 5785 5885 5945
Kerbweight - F.A. 3430 3510 3520 3550 3575 3635 3670 3690 3625 3635 3665 3695 3755 3790 3810
Kerbweight - R.A. 1890 1920 1920 1940 1965 2020 2085 2125 1935 1935 1955 1975 2030 2095 2135
G.V.W. (EC) 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000 18000
Plated weight on front axle (EC) 7100 7100 7100 7100 7100 7100 7100 7100 7100 7100 7100 7100 7100 7100 7100
Plated weight on rear axle (EC) 11500 11500 11500 11500 11500 11500 11500 11500 11500 11500 11500 11500 11500 11500 11500
Max body & Payload (EC) 12680 12570 12560 12510 12460 12345 12245 11185 12440 12430 12380 12330 12215 12115 12055

MLC MLL
Wheelbase Type Drawing Wheelbase Type Drawing
3690 Left hand drive 5802257660 4185 Left hand drive 5802257661
4185 Left hand drive 5802257661 4590 Left hand drive 5802257662
4590 Left hand drive 5802257662 4815 Left hand drive 5802257663
4815 Left hand drive 5802257663 5175 Left hand drive 5802257664
5175 Left hand drive 5802257664 5670 Left hand drive 5802257665
5670 Left hand drive 5802257665 6210 Left hand drive 5802257666
6210 Left hand drive 5802257666 6570 Left hand drive 5802257667
6570 Left hand drive 5802257667
Notes : member includes the thickness as well.
Weights are standard configuration and include: chassis cab,
driver ( 75 Kg.), full fuel tank, oils,tools kit and spare wheel

(if present). The values of GVW / GCW can vary according

to the markets and the homologations. The height of the side

6 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS
ENGINE
Commercial name TECTOR
Position FRONT
Cycle DIESEL
Aspiration type TC+AFTERCOOLER
Injection type DIRECT
4 Stroke / 2 Stroke cycle 4
No. of cylinders 6
Cylinders layout IN-LINE
Valves per cylinder 4
Bore mm 102
Stroke mm 120
Total displacement cm³ 5880
Weight (without oil / water) Kg 510
Oil capacity (l) 11.8
Type of fuel DIESEL OIL
Injection system HIGH PRESSURE / COMMON RAIL
Injection governor type ELECTRONIC INTEGRATED WITH ECU
Cooling system water
Cold starting type THERMOSTARTER
Emissions control EURO3
Cooling system water
Fan type viscostatic
Air intake WITH SNORKEL
Snorkel position Behind the cab, left side
Filter type Dry - Heated
Air filter position Behind the cabin

DRIVELINE
280 E3 - Motore Tector6 - 5,9 l - 202Kw
Engine Identification Code F4AEE681A*C
Power kW 202
Power Hp 275
Rpm at Max Power 2500
Torque Nm 930
At rpm 1/min 1250
Type of turbocharging with waste gate valve

7 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS
GEARBOX
Gearbox model Gearbox Type Installation Box material Total ratio Dry weight Kg Max input No. of No. of No. of synchro
speed torque Nm forward reverse gears
gears gears
3000 AUTOMATIC ENGINE FLANGED ALUMINIUM 4.65 * - 260 (w/o 1261 5 1 --
ALLOY retarder)
6S 1000 TO Mechanical ENGINE FLANGED ALUMINIUM 8.65 136 1050 6 1 6
SYNCRONIZED ALLOY
9S 1110 TO Mechanical ENGINE FLANGED ALUMINIUM 12.64 136 1100 9 1 9
SYNCRONIZED ALLOY

GEAR RATIOS
Gearbox model 1st 2nd 3rd 4th 5th 6th 7th 8th 9th rev.
1st
3000 3.49 1.86 1.41 1 0.75 5.03
6S 1000 TO 6.75 3.6 2.12 1.39 1 0.78 6.06
9S 1110 TO 9.48 6.58 4.68 3.48 2.62 1.89 1.35 1 0.75 8.97

CLUTCH
Gearbox model Type Adjustment Outer diameter mm Outer diameter Release control
(inches)
3000 -- -- -- -- --
6S 1000 TO SINGLE DRY PLATE AUTOMATIC 395 15.5" MECHANICAL/HYDRA
ULIC
9S 1110 TO SINGLE DRY PLATE AUTOMATIC 395 15.5" MECHANICAL/HYDRA
ULIC

3000 Automatic gearbox:

* 300 kg with Hydraulic Retarder

HP Model Stall Torque Ratio:

220/250 TC415 2,35
280/320 TC418 1,98

REAR AXLE RATIO

Option code 00007 00008 00014 00016 02008 02009 06020 *
Ratio 6.14 6.43 5.13 5.63 4.3 4.56 4.89
*: Standard axle ratio
TYRES & WHEELS
Code Tyres Front Rear Dynamic Rolling resistance Load index Speed index Rolling circumference m
Radius m Coefficient
20498 Standard 295/80R22,5 295/80R22,5 .507 .006 152/148 L = 120 KM/H 3.184
20137 Optional 315/70R22,5 315/70R22,5 .493 .007 154/150 L = 120 KM/H 3.093
20146 Optional 315/80R22,5 315/80R22,5 .522 .006 156/150 L = 120 KM/H 3.282
20795 Optional 315/80R22,5 315/80R22,5 .522 .006 156/150 L = 120 KM/H 3.278
20232 Optional 295/80R22,5 295/80R22,5 .507 .006 152/148 M = 130 KM/H 3.184
20143 Optional 295/80R22,5 295/80R22,5 .507 .006 152/148 M = 130 KM/H 3.184
20231 Optional 315/80R22,5 315/80R22,5 .522 .006 156/150 L = 120 KM/H 3.282
20230 Optional 305/70R22,5 305/70R22,5 .486 .007 152/148 L = 120 KM/H 3.045
20790 Optional 315/80R22,5 315/80R22,5 .522 .006 156/150 L = 120 KM/H 3.282
20229 Optional 315/70R22,5 315/70R22,5 .493 .007 154/150 L = 120 KM/H 3.093
20504 Optional 315/70R22,5 315/70R22,5 .493 .007 154/150 L = 120 KM/H 3.093
20757 Optional 12R22,5 12R22,5 .526 .007 152/148 L = 120 KM/H 3.303
20842 Optional 12R22,5 12R22,5 .526 .0072 152/148 3.305
20041 Optional 315/60R22.5 315/60R22.5 .461 .007 152/148 L = 120 KM/H 2.879

Wheels
Rim type DISC Rim material STEEL

8 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS

AXLES
Position Description Type
Front 5871/5 - Iveco Axle RIGID
Rear MS13-165 - Ponte ArvinMeritor S.R. RIGID

9 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS
PERFORMANCE
* Max Speed. Calculated speed on the basis of engine rpm and axle ratios. Real speed limits must take into account the speed index of the tyres: K = 110 km / h L = 120
km / h M = 130 km / h
** Theoretically calculated values, arising from the engine torque without considering the road-friction values and the stability limits of the vehicles. When calculating with
more than one tyres or more than one axle ratio, availability of each combination must be checked.
Speed and gradeability values are rounded.
A = Total Weights (solo vehicle) Kg - Max Gradeability %
B = Total Weights (vehicle+trailer) Kg - Max Gradeability %
Tyre: 20498 - TYRES 295/80R22,5-152-FAST ON Efficiency: 0.85 No transfer box
Gearbox model 3000
Axle Gear Gear Speed Speed RPM RPM A B
Ratio Ratio Ratio km/h km/h at 80 at 90 18000 21500
1° 5° 1° 5° km/h km/h 1° 5° 1° 5°
6.14 3.49 0.75 22.29 103.71 1927 2168 18.62 3.19 15.41 2.57
6.43 3.49 0.75 21.28 99.04 2018 2271 19.57 3.41 16.19 2.75
5.13 3.49 0.75 26.68 124.13 1610 1812 15.37 2.40 12.72 1.91
5.63 3.49 0.75 24.31 113.11 1767 1988 16.97 2.80 14.05 2.25
4.3 3.49 0.75 31.83 148.09 1350 1519 12.73 1.68 10.53 1.31
4.56 3.49 0.75 30.01 139.65 1431 1610 13.55 1.92 11.21 1.51
4.89 3.49 0.75 27.99 130.22 1535 1727 14.60 2.20 12.09 1.74
Gearbox model 6S 1000 TO
Axle Gear Gear Speed Speed RPM RPM A B
Ratio Ratio Ratio km/h km/h at 80 at 90 18000 21500
1° 6° 1° 6° km/h km/h 1° 6° 1° 6°
6.14 6.75 0.78 11.52 99.72 2005 2255 38.58 3.37 31.49 2.73
6.43 6.75 0.78 11.00 95.23 2099 2362 40.73 3.60 33.17 2.91
5.13 6.75 0.78 13.79 119.36 1675 1884 31.41 2.57 25.81 2.05
5.63 6.75 0.78 12.57 108.76 1838 2068 34.90 2.97 28.59 2.39
4.3 6.75 0.78 16.45 142.40 1404 1579 25.84 1.84 21.32 1.44
4.56 6.75 0.78 15.52 134.28 1489 1675 27.56 2.08 22.71 1.64
4.89 6.75 0.78 14.47 125.22 1596 1796 29.78 2.36 24.50 1.88
Gearbox model 9S 1110 TO
Axle Gear Gear Speed Speed RPM RPM A B
Ratio Ratio Ratio km/h km/h at 80 at 90 18000 21500
1° 9° 1° 9° km/h km/h 1° 9° 1° 9°
6.14 9.48 0.75 8.21 103.71 1927 2168 58.97 3.19 46.85 2.57
6.43 9.48 0.75 7.84 99.04 2018 2271 62.86 3.41 49.64 2.75
5.13 9.48 0.75 9.82 124.13 1610 1812 46.73 2.40 37.79 1.91
5.63 9.48 0.75 8.95 113.11 1767 1988 52.56 2.80 42.17 2.25
4.3 9.48 0.75 11.72 148.09 1350 1519 37.84 1.68 30.91 1.31
4.56 9.48 0.75 11.05 139.65 1431 1610 40.54 1.92 33.02 1.51
4.89 9.48 0.75 10.30 130.22 1535 1727 44.07 2.20 35.75 1.74

SUSPENSIONS
Front parabolic suspension :
No. of leaves: 4
Rear parabolic suspension :
No. of leaves: 2 + 1

10 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS

ML DAY CAB MY2015

Cab exterior

Day cab and sleeper cab

Forward control cab.

Illuminated steps.
New front grid, new plastic front bumper, new badging.
Pressed steel construction with SMC for vulnerable parts.

External sun visor as option.

Integrated sun visors filter as option (the integrated sun visors filter has been developed as alternative to the external sun visor in order to guarantee to the driver the
same protection from the sun with a lower impact on CX factor and consequent reduced fuel consumption).
New handle with an improved ergonomics.

New side deflectors improving air flow keeping door handle clean.

Rear view mirrors:

Euro V range : standard : "mirror 2003/97/CE " (compliant with UNIECE 46)
Euro III range : standard : "tubular arms mirror" (compliant with 88/321/EC)

Cab height:
From ML110EL.. up to ML120EL..: 1 step
from ML120E.. up to ML180E.. and 4x4 models: 2 steps

Fully suspended cab (helical springs and dampers). Reinforced cab suspensions on 4x4 and ML150E..H /ML170E..H models.
Manual or servo assisted tilt to 60 degrees.
Sound and thermal insulation, plastic bumper with integrated headlamps, spray suppression, 2-speed windscreen with intermittent function. Hood can be raised for daily
checks.

Led Day Running Lights (available as option on all the models, except for 4x4 - ML150E..H - ML170E..H and chassiscowl models).
Xenon head lamps (available as option on all the models).

Cab interior

New standard contains:

New dashboard mold colour.
New light control switch.
New automatic and automated gearbox controls.
New central tunnel module with cup holders, 12 V plug, and ashtray cup.
New door panel (RHD only).
New seats trim.
New instrument Cluster.
Highline Cluster.
New steering wheel.
Two USB plugs.
New clima control switches.
New cards/coins holders.

Furthermore: overhead lockers with doors. Glove box. Four speed fan. All gauges monitored using international symbols. Column mounted control stalks. Overhead
console for radio and CB. Digital monochrome display, radio preparation (cabling, speaker and aerial), D/N/R buttons for automatic & automated gearbox with manual
override on steering column stalk. Dashboard gear lever for manual box. Body builder plug, Adjustable steering wheel. Electric windows. Smocking kit.

Available options:
Arm rest (for air suspended seats only).
High comfort driver seat.
Three way adjustable driver seat, dual fixed passenger seat.
Air compressor plug.
Immobiliser.
Central locking with remote control.
Additional cab heater.

11 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS

Furthermore:

Day Cab standard contains:

Rear wall rail with hooks for clothes.
Windowless rear wall with document net.

Available options for Day Cab:

New mobile office with integrated led light (2 seats configuration).
Rear windows.

Sleeper Cab standard contains:

Courtesy and map reading lights.
Bunk.

Available options for Sleeper Cab:

High roof.
Additional bunk.

BATTERY
Electrics
Voltage V 24
No. of batteries 2
Batteries capacity V/Ah 12 V /120 Ah
Notes: Std. on all wheelbases except 4x2 model with 3105 mm wheelbase (models with mechanical suspensions)

12 11 May 2017
 ML 180E28-E3
Chassis cab
Steel suspension

MODEL COMPONENTS
MISCELLANEOUS
Fuelling : Disc Brake : Braking system :
Fuel tank 200 litres, plastic. Diameter : Type : Full air. Two independent circuits.
front 432 x 45 mm ventilated disc. Service brake : ABS + EBL (ESP as on option).
Friction area x wheel : 408 cm² Parking : Spring parking brake on rear axle.
rear 432 x 45 mm ventilated disc. Emergency : Combined with parking brake.
Friction area x wheel : 408 cm² Air reservoirs : 2 x 20 litres, steel (25 litres for
vehicle with air suspensions).
Exaust brake : Standard.
Air compressor : 225 cc single cylinder (360 cc as
on option; standard with automatic gearbox).
Air drier : Air processing Unit (APU).

13 11 May 2017
Body Builders Management
Lungo Stura Lazio 15
10156 Turin (I)
Email: [email protected]

WWW.IVECO.COM ML 180E28-E3