KYK Catalogue

Rolling Bearings Classifications
Rolling bearing construction

Most rolling bearings consist of rings with raceway (inner ring and outer ring), rolling elements (either balls or
rollers) and cage. The cage separates the rolling elements at regular intervals, holds them in place within the
inner and outer raceways, and allows them to rotate freely.
Classification of rolling bearings
Rolling bearings divide into two main classifications: ball bearings and roller bearings. Ball bearings are classified
according to their bearing ring configurations: deep groove type and angular contact type. Roller bearings on
the other hand are classified according to the shape of the rollers: cylindrical, needle, tapered and spherical.
Rolling bearings can be further classified according to the direction in which the load is applied; radial bearings
carry radial loads and thrust bearings carry axial loads.
Other classifications
1) Number of rolling rows (single, double, or 4-row),
2) Separable and non-separable, in which either the inner ring or the outer ring can be detached.
3) There are also bearings designed for special purposes, such as Automotive and other applications
Deep groove ball bearings

The most common type of bearing, deep groove ball bearings are widely used in
a variety of fields. Deep groove ball bearings include shield bearings and sealed
bearings with grease enabling easier usage. Deep groove ball bearings also
include bearings with a locating snap-ring to facilitate positioning when mounting
the outer ring. These type of bearings supports radial load on both directions. Deep
groove ball bearings are also classified into Thin series, Light series, Medium
series and Heavy series ball bearings.
Angular contact ball bearings

Angular contact ball bearings unite point of contact of the inner ring, ball and the
outer ring runs at a certain angle (contact angle) in the radial direction. Bearings
are generally designed with three contact angles. Angular contact ball bearings
can support an axial load, but cannot be used as single bearing because of the
contact angle. They must instead be used in pairs or in combinations. Angular
contact ball bearings include double row angular contact ball bearings for which
the inner and outer rings are combined as a single unit. The contact angle of
double row angular contact ball bearings is 25°. These type support certain
amount of combined loads.
Cylindrical roller bearings

Cylindrical roller bearings use rollers for rolling elements, and therefore has a
high load capacity. The rollers are guided by the ribs of the inner or outer ring.
The inner and outer rings can be separated to facilitate assembly, and both can
be fitted with shaft or housing tightly. If there are no ribs, either the inner or the
outer ring can move freely in the axial direction. Cylindrical roller bearings are of
different types, like N, NU, NJ, NUP, NF depending upon the construction of inner
and outer rings. Cylindrical roller bearings are designed with multiple row rollers
and full compliment rollers without cage depending on the applications. These
bearings are suitable for heavy radial and impact loading and are appropriate for
high speed applications.
3
Rolling Bearings Classifications
Tapered roller bearings

Tapper roller bearings are designed such that the outer ring, inner ring and the
rollers have tapered surfaces whose apexes converge at a common point on the
bearing axis. Tapper rollers are available in metric as well as inch dimensions most
commonly called as metric series and inch series . Tapper rollers are available in
Single, Double and four row, these type of bearings are suitable for Heavy and
Impact load application and can take both radial and axial load simultaneously.
Spherical roller bearings

Spherical roller bearings are equipped with an outer ring with a spherical raceway
surface and an inner ring which holds two rows of barrel shaped rolling elements,
spherical roller bearings are able to adjust center alignment to handle inclination
of the axle or shaft. There are varieties of bearing types that differ according
to internal design. Spherical roller bearings include as type equipped with an
inner ring with a tapered bore. The bearing can easily be mounted on a shaft by
means of an adapter or withdrawal sleeve. The bearing is capable of supporting
heavy loads, and is therefore often used in industrial machinery. Gages for these
bearings are of both steel and brass depending on the applications.
Thrust bearings
Thrust bearings are classified in accordance to
the rolling elements they contain and generally the
allowable rotational speed is very low.
Thrust ball bearing with single row is called as single
direction Thrust ball bearings and can take axial load
in one direction, whereas Thrust ball bearing with
double row is called as double direction Thrust ball
bearings and can take axial load from both directions.
Thrust bearings with rollers as rolling element can
accommodate a certain amount of radial load along
with axial loads.
Ball Bearing unit

A ball bearing unit is comprised of a ball bearing inserted into various types of housings. The housing can
be bolted onto machinery and the inner ring can be easily mounted on the shaft with a set screw. This
means the bearing unit can support rotating equipment without special design to allow for mounting. A variety
of standardized housing shapes is available, including pillow and flange types. The outer diameter of the
bearing is spherical just like the inner diameter of the housing, so it capable of aligning itself on the shaft. For
lubrication, grease is sealed inside the bearing, and particle penetration is prevented by a double seal with
3 lip
UCP UCF UCFL UCFC UCT
4
Rolling Bearings Classification
Bearing Designation, prefix and suffix

Rolling bearing part numbers indicate bearing type, dimensions, tolerances, internal construction, and other
related specifications. Bearing numbers are comprised of a “basic number” followed by “supplementary codes.”
The basic number indicates general information about a bearing, such as its fundamental type, boundary
dimensions, series number, bore diameter code and contact angle. The supplementary codes derive from
prefixes and suffixes which indicate a bearing’s tolerance, internal clearance, and related specifications.
Ball bearings
6 2 0 4 ZZ NR C3
Radial clearance
Snap ring groove with snap ring
Both side metal shields
Bore size
Diameter series
Single row deep groove ball bearings
Bearing type Bearing series Diameter series

Single row ball 68,69,160,60,62,63,64,622,623 8,9,0,0,2,3,4,2,3
bearings
Double row ball 42,43 2,3
bearings
Prefix Description Suffix Description

F Flanged outer ring CM Electric motor clearance
RLS Inch type ball bearing C2 Radial clearance lesser than normal
RMS Inch type ball bearing C3 Radial clearance higher than normal
C4 Radial clearance higher than C3
DDU Bearings with non contact type
rubber seals
LLU Bearings with contact type rubber
seals
M Machined brass cage
N With snap ring groove
NR Snap ring groove with snap ring
P6 Precision class 6
Z With one side metal shield
ZZ With both side metal shield
ZNR With one side metal shield and snap
ring groove with snap ring
5
Self Aligning ball bearings
1209 K + H
Bearing with sleeve
Tapered bore
Bore size
Diameter Series
Self aligning ball bearings
Bearing type Bearing Series Diameter series

Self aligning ball bearings 12,22,13,23 2,2,3,3

K With tapered bore
+H With adapter sleeve
Angular Contact ball bearings
7205B
Contact angle
Bore size
Diameter series
Angular contact ball bearings

Angular contact ball bearings 72.73 2,3
Double row angular contact ball bearing with filling 32,33 2,3
slot (maximum capacity)
Double row angular contact ball bearing without 52,53 2,3
filling slot

A 30 degree contact angle
B 40 degree contact angle
TVP With reinforced polyamide cage
C 15 degree contact angle
M Brass cage
6
Cylindrical roller bearings
N U 2 2 0 8 M C3
Radial clearance
Machined brass cage
Bore Size
Diameter series
Width series
NU type cylindrical roller bearings
Bearing type Bearing series Diameter series

Cylindrical roller bearing 2,22,3,32 2,2,3,3

N Bearings with both side sliding outer ring N With snap ring groove
NJ Bearings with one side sliding inner ring NR Snap ring groove and snap ring
NU Bearings with both side sliding inner ring V Full compliment bearings
NUP Bearing with fixed inner and outer ring
Tapered Roller bearings
32217JR
High load carrying capacity
Bore size
Diameter series
Width series
Tapered roller bearings

Taper roller bearing 320,330,331,302,322,332,303,313,323 0,0,1,2,2,2,3,3,3

HC Hi-cap D Steep contact angel (24°~32°) metric
series
HM Heavy medium duty inch series JR High load carrying capacity
JL J series tapper roller bearings
JLM J series light medium duty inch series
L Light duty inch series
LM Light medium duty inch series
M Medium duty inch series
7
Spherical Roller bearings
2 2 3 0 8 K MB W33
With lubricating holes and groove
Machined brass cage
Tapered bore 1:12
Bore size
Diameter series
Width series
Spherical roller bearings

Spherical roller bearings 239,230,240,231,241,222,232,213,223, 9,0,0,1,1,2,2,3,3

CC Steel cage
CA Machined single brass cage
K Tapered bore 1:12
K30 Tapered bore 1:30
MA Machined brass cage outer ring guided
MB Machined brass cage inner ring guided
W33 Lubricating holes and groove on outer ring
Thrust ball bearings
51120M
Brass cage
Bore size
Diameter series
Height series
Thrust ball bearings

Thrust ball bearing 511,512,513 1,2,3

8
Bearings Tolerances
Tolerances for bearings

Bearing tolerances and permissible values for the boundary dimensions and running accuracy of bearings are
specified. These values are prescribed in JIS B 1514 “tolerances for rolling bearings.” (These JIS standards
are based on ISO standards.)
Bearing tolerances are standardized by classifying bearings into the following six classes (accuracy in
tolerances becomes higher in the order described): 0, 6X, 6, 5, 4 and 2.
Dimensional accuracy
Dimensional accuracy constitutes the acceptable values for bore diameter, outer diameter, assembled
bearing width, and bore diameter uniformity as seen in chamfer dimensions, allowable inner ring tapered
bore deviation and shape error. Also included are, average bore diameter variation, outer diameter variation,
average outer diameter unevenness, as well as raceway width and height variation (for thrust bearings).
Running accuracy
Running accuracy constitutes the acceptable values for inner and outer ring radial runout and axial runout,
inner ring side runout, and outer ring outer diameter runout. Allowable rolling bearing tolerances have been
established according to precision classes. Bearing precision is stipulated as JIS class 6, class 5, class 4, or
class 2, with precision rising from ordinary precision indicated by class 0.
Table a
Table b
Table c
Table d
Table e
9
Bearings Tolerances
Table a
Table a.1
Table a.2
10
Bearings Tolerances
11
Bearings Tolerances
Table b
Table b.1
Table b.2
Table b.3
12
Bearings Tolerances
13
Bearings Tolerances
Table c
Table c.1
Table c.2
Table d
Table d.1
14
Bearings Tolerances
Table d.2
Table d.3
Table e
Table e.2
Table e.1
15
Bearings Fits
Interference
For rolling bearings, inner and outer rings are fixed on the shaft or in the housing so that relative movement
does not occur between fitting surfaces during operation or under load. This relative movement between the
fitting surfaces of the bearing and the shaft or housing can occur in a radial direction, an axial direction, or
in the direction of rotation. Types of fitting include tight, transition and loose fitting, which may be selected
depending on whether or not there is interference.
The most effective way to fix the fitting surfaces between a bearing’s raceway and shaft or housing is to
apply a “tight fit.” The advantage of this tight fit for thin walled bearings is that it provides uniform load support
over the entire ring circumference without any loss of load carrying capacity. However, with a tight fit, ease
of installation and disassembly is lost; and when using a non-separable bearing as the floating-side bearing,
axial displacement is not possible. For this reason, a tight fit cannot be recommended in all cases.
The necessity of a proper fit
In some cases, improper fit may lead to damage and shorten bearing life, therefore it is necessary to make
a careful investigation in selecting a proper fit. Some of the bearing failure caused by improper fit are listed
below.
• Raceway cracking, early flaking and displacement of raceway
• Raceway and shaft or housing abrasion caused by creeping and fretting corrosion
• Seizing caused by negative internal clearances
• Increased noise and deteriorated rotational accuracy due to raceway groove deformation
Fit selection
Selection of a proper fit is dependent upon thorough analysis of bearing operating conditions, including
consideration of:
• Shaft and housing material, wall thickness, finished surface accuracy, etc.
• Machinery operating conditions (nature and magnitude of load, rotational speed, temperature, etc.)
“Tight fit” or “Loose fit”
(1) For raceways under rotating loads, a tight fit is necessary. “Raceways under rotating loads” refers to
raceways receiving loads rotating relative to their radial direction. For raceways under static loads, on the
other hand, a loose fit is sufficient.
(2) For non-separable bearings, such as deep groove ball bearings, it is generally recommended that either
the inner ring or outer ring be given a loose fit.
16
Bearings Fits
Recommended Fits
Bearing fit is governed by the selection tolerances for bearing shaft diameters and housing bore diameters.
Widely used fits for 0 Class tolerance bearings and various shaft and housing bore diameter tolerances are
shown below.
Interference minimum and maximum values

The following points should be considered when it is necessary to calculate the interference for an
application:
• In calculating the minimum required amount of interference keep in mind that:
1) interference is reduced by radial loads
2) interference is reduced by differences between bearing temperature and ambient temperature
3) interference is reduced by variation of fitting surfaces
• The upper limit value should not exceed 1/1000 of the shaft diameter.
17
Bearings Fits
18
Bearings Fits
19
Bearings Fits
- class 0
- class 0
20
Bearings Fits
21
Bearing Internal Clearance
Bearing internal clearance

Bearing internal clearance is the amount of internal free movement before mounting.
As shown below, when either the inner ring or the outer ring is fixed and the other ring is free to move,
displacement can take place in either an axial or radial direction. This amount of displacement (radially or
axially) is termed the internal clearance and, depending on the direction, is called the radial internal clearance
or the axial internal clearance.
When the internal clearance of a bearing is measured, a slight measurement load is applied to the raceway
so the internal clearance may be measured accurately. However, at this time, a slight amount of elastic
deformation of the bearing occurs under the measurement load, and the clearance measurement value
(measured clearance) is slightly larger than the true clearance. This difference between the true bearing
clearance and the increased amount due to the elastic deformation must be compensated for. These
compensation values are given in Table below.
Internal clearance selection

The internal clearance of a bearing under operating conditions (effective clearance) is usually smaller than the
same bearing’s initial clearance before being installed and operated. This is due to several factors including
bearing fit, the difference in temperature between the inner and outer rings, etc. As a bearing’s operating
clearance has an effect on bearing life, heat generation, vibration, noise, etc.; care must be taken in selecting
the most suitable operating clearance.
Criteria for selecting bearing internal clearance
A bearing’s life is theoretically maximum when operating clearance is slightly negative at steady operation. In
reality it is however difficult to constantly maintain this optimal condition. If the negative clearance becomes
enlarged by fluctuating operating conditions, heat will be produced and life will decrease dramatically. Under
ordinary circumstances you should therefore select an initial internal clearance where the operating clearance
is slightly larger than zero.
For ordinary operating conditions, use fitting for ordinary loads. If rotational speed and operating temperature
are ordinary, selecting normal clearance enables you to obtain the proper operating clearance. Table below
gives examples applying internal clearances other than CN (normal) clearance.
22
23
- Bearing with tapered bore
24
25
- Bearing with tapered bore
26
Bearing Lubrication
Bearing Lubrication
Proper lubrication for rolling element bearings is critical for reliable bearing operation and prevention of
premature damage and a reduction in fatigue life. The proper bearing lubricant must provide a separating film
between the rolling elements, raceways, and cage to prevent metal-to-metal contact. The lubricant film must
be thick enough under operating conditions to prevent contact of rolling element and raceway asperities.
If the asperities of rolling elements and races of an anti-friction bearing come into contact with each other,
a certain amount of molecular adhesion or micro-welding or shearing of these asperities as a result of the
relative motion between them can be expected. The result is an undesirable surface change of the rolling
surfaces. Ideal lubrication requires that an oil film be continually present to prevent contact of the surface
asperities and metal to metal contact.
In addition to preventing metal-to-metal contact, proper bearing lubricants help perform the following
function:
• Reduce friction, heat generation, torque, and power consumption
• Provide a heat transfer medium
• Prevent corrosion
• Aid in providing proper sealing and preventing contamination
Bearing lubrication is broadly categorized as being either grease or oil lubrication. The decision to use grease or oil
and what type of lubricant system to use, are dependent on the bearing type and application operating conditions.
Bearing greasing methods and amounts

There are two methods of providing bearing grease lubrication. One is the closed lubrication, in which grease
is filed in advance into a shielded or sealed bearing; the other is the feeding method in which the bearing and
housing are greased at assembly with the proper amount and designed to allow re-greasing and replacement
at specified intervals. The dosed method using a pre-lubricated shielded or sealed bearing is well suited for
applications where cost and space limitations preclude the use of grease filled housing or where relubrication
is not possible or necessary. Conversely, the use of the feeding method has the advantage of allowing
the replacement on periodic intervals in those applications where operating conditions require grease
replacement.
For bearing applications utilizing the feeding method, there should be a grease fitting and a vent at opposite
ends of the housing near the top. Also, a drain plug should be located near the bottom of the housing to allow
purging of the old grease during relubrication. A bearing should be initially greased at assembly by packing
it in on both sides and making sure the grease is between the rolling elements and cage. Regreasing should
always occur while the bearing is in motion at the normal operating temperature.
Grease amount
The amount of grease needed to effectively lubricate a bearing is normally very small. In general, grease
fill should be one-third to one-half of the space around the bearing; however, this may vary according to the
housing design and application requirements. In applications with high speed and low torque requirements,
the bearings can be lubricated with very small quantities of greases. Similarly, in low speed applications
where the bearing may be exposed to dirt or moisture, the space around the bearing can be filled from two-
thirds to nearly full to prevent contamination. If an excessive amount of grease is used when not required,
additional heat will be generated from the churning, resulting in a softening and deterioration of the grease,
and a reduction in bearing life. The grease weight required for a bearing can be calculated in grams.
Grease quantity = 0.05 x D x B gms.
Regreasing intervals and grease life

With grease lubricated bearings, periodic relubrication is normally required to ensure efficient operation.
Over a period of time, most grease will eventually start to harden due to oxidation. The exception to this is in
presealed bearings where relubrication is usually not required.
When regreasing bearings, it is necessary to be sure that the grease fitting is clean prior to injecting the
grease. A hand operated grease gun should be used for relubrication, but the use of high pressure needs
to be avoided. High pressure may blow out seals. When using a grease gun, it should be calibrated for the
27
Bearing Lubrication
proper amount of grease, and confirmed that the grease in the gun is the same as what was initially applied
to the bearings.
The main considerations for determining a relubrication cycle are operating speed, bearing size, operating
temperature, and sealing efficiency. Seals are very critical with grease lubrication because of the importance
to keep the grease free from contamination. Contamination that reaches the grease is trapped and will cause
bearing damage and wear problems.
As the chart below shows leading grease available in the market with their specifications
Working 0.1mm Dropping
temperature Worked Point
Manufacturer Product BaseOil/thickener range Penetration Remark
˚C ˚C ˚C
Polyol ester+Diester/
Low noise Long life,
Multemp SRL Lithium hydroxy -50~150 250 190
High temperature
Stearate
Low torque,
Diester+Refined
Outstanding noise
Multemp PS mineral oil Lithium -60~130 NO.2 190
Suppressant
Stearate
property
Kyodo Yushi
High
Synthetic temperature,High
Multemp SB-M -40~200 220 >260
hydrocarban/Diurea speed operation, low
noise property
Polyol ester+Diester/
Low noise Long life,
Raremax Super N Lithium hydroxy -40~180 260 120
High temperature
Stearate
Wide applications
Alvania RLQ 2 Mineral oil / Lithium -25~120 266 195
available
Wide applications
Alvania RL2 Mineral oil/ Lithium -30~120 310 185
available
Shell Not good for

Alvania RL3 Mineral oil/ Lithium -30~120 220 185
transmission
Long service life
under heavy load
Alvania EP 2 Mineral oil/ Lithium -20~110 265 185
water, resistance,
Corrosian resistance
PAO, Ester oil/ Low noise Long life,
Asonic GL Y 32 -50~140 265~295 >190
Lithium High temperature
PAO,Ester oil / Low noise, Long life,
Asonic Q 74-73 -40~160 220~250 >250
Polyrea High temperature
Low noise, Long life,
Klueberquiet BQH72-102 Ester oil / Polyurea -40~180 250~280 >250
High temperature
High temperature,
Kluber Klueberquiet BEP72-82 Ester oil / Polyurea -40~180 250~280 >250 Available for auto
generator bearings
High temperature,
Mineral oil, PAO/
Petamo GHY 133 N -30~160 265~295 >250 Available for auto
Polyrea
generator bearings
Avaiable for pump
Ester oil, Mineral
Lsoflex LDS 18 Special A -50~120 265~295 >190 bearings, Motor and
oil / Li
its accessory
High Speed, Low
Beacon 325 Diester / Lithium -54~120 280 193 noise Corrosian
resistance
Exxon Mobil Polyrex EM Mineral / Diurea -29~177 318 288 Low temperature
Water resistance,
Mobilgrease 28 Diester/ Microgel -62~177 310 >260
High temperature
Water resistance,
Chevron SRI-2 ISOSYN/ Polyurea -30~150 280 243 Corrosian resistance
High temperature
Dupont Krytox 240 Fluoinated / PTFE -34~288 285 High temperature
28
Vibration and Noise
Vibration of single bearing µm/s

Bore dia
V0 V1 V2 V3 V4
(mm)
LB MB HB LB MB HB LB MB HB LB MB HB LB MB HB
Miniature Ball Bearings
3-4 80 44 44 60 35 32 48 26 22 31 16 15 28 10 10
5-6 110 72 60 74 48 40 58 36 30 35 21 18 32 11 11
7-9 130 96 80 92 66 54 72 48 40 44 28 24 38 12 12
Deep Groove Ball Bearings
10-12 160 120 100 120 80 70 90 60 50 55 35 30 45 14 15
15-17 210 150 120 150 100 85 110 78 60 65 46 35 52 18 18
20-25 260 190 150 180 125 100 130 100 75 80 60 45 60 25 25
30-35 300 240 190 200 150 130 150 120 100 90 75 60 70 35 40
40-45 360 300 260 240 180 160 180 150 130 110 90 80 82 50 50
50-55 420 320 320 280 200 200 210 160 160 125 100 100 95 70 70
60 480 360 440 320 220 240 240 180 200 145 110 130 100 80 80
Maximum acceleration of single bearing dB

Bore dia (mm) For dia series 0 For dia series 2 For dia series 3
Z Z1 Z2 Z3 Z Z1 Z2 Z3 Z4 Z Z1 Z2 Z3 Z4
Miniature Ball Bearings
3-4 35 34 32 28 36 35 32 30 37 36 33 31
5-6 37 36 34 30 38 37 34 32 39 37 35 33
7-8 39 38 35 31 40 38 36 34
9 41 40 36 32 42 40 37 35
Deep Groove Ball Bearings
10 43 42 38 33 44 42 39 35 30 46 44 40 37 32
12 44 43 39 34 45 43 39 35 30 47 45 40 37 32
15 45 44 40 35 46 44 41 36 31 48 46 42 38 33
17 45 44 40 35 46 45 41 36 31 48 46 42 38 33
20 47 45 41 36 48 46 42 38 33 50 48 43 39 34
25 48 46 42 38 49 47 43 40 36 51 49 44 41 37
30 49 47 43 39 50 48 44 41 37 52 50 45 42 38
35 41 49 45 41 52 50 46 43 39 54 52 47 44 40
40 53 51 46 42 54 52 47 44 40 56 54 49 45 41
45 55 53 48 45 56 54 49 46 43 58 56 51 47 44
50 57 54 50 47 58 55 51 48 45 60 57 53 49 46
55 59 56 52 49 60 57 53 50 47 62 59 54 51 48
60 61 58 54 51 62 59 54 51 48 61 61 56 53 50
65 49 48 46 50 49 47 42 51 50 48 43
70 50 49 47 51 50 48 43 52 51 49 44
75 51 50 48 52 51 49 44 53 52 50 45
80 52 51 49 53 52 50 45 54 53 51 46
85 53 52 50 54 53 51 46 56 55 52 47
90 54 53 52 56 55 53 48 58 57 54 49
95 56 55 54 58 57 55 50 60 59 56 51
100 58 57 56 60 59 57 52 62 61 58 53
105 60 59 58 62 61 59 54 64 63 60 55
110 62 61 60 64 63 61 56 66 65 62 57
115-120 64 63 62 66 65 63 58 68 67 64 59

29
4~7mm
shielded
d D B rs min Cr Cor Cr Cor type
12 4.0 0.20 0.97 0.36 99 37 53000 63000 604 0.0021

12 4.0 0.20 0.97 0.36 99 37 53000 604 LLU 0.0021
12 4.0 0.20 0.97 0.36 99 37 53000 604 ZZ 0.0021
4 13 5.0 0.20 1.30 0.49 133 49 40000 54000 624 0.0029
13 5.0 0.20 1.30 0.49 133 49 40000 624 LLU 0.0029
13 5.0 0.20 1.30 0.49 133 49 40000 624 ZZ 0.0029
11 3.0 0.15 0.97 0.36 99 37 53000 63000 685 0.0010

11 5.0 0.15 0.97 0.36 99 37 53000 685 LLU 0.0010
11 5.0 0.15 0.97 0.36 99 37 53000 685 ZZ 0.0010
14 5.0 0.20 1.30 0.48 133 49 50000 60000 605 0.0035
5 14 5.0 0.20 1.30 0.48 133 49 50000 605 LLU 0.0035
14 5.0 0.20 1.30 0.48 133 49 50000 605 ZZ 0.0035
16 5.0 0.30 1.75 0.67 179 68 40000 49000 625 0.0050
16 5.0 0.30 1.75 0.67 179 68 40000 625 LLU 0.0050
16 5.0 0.30 1.75 0.67 179 68 40000 625 ZZ 0.0050
13 3.50 0.15 1.10 0.44 112 45 48000 57000 686 0.0018

13 5.0 0.15 1.10 0.44 112 45 48000 686 LLU 0.0018
13 5.0 0.15 1.10 0.44 112 45 48000 686 ZZ 0.0018
17 6.0 0.30 1.95 0.74 199 75 43000 51000 606 0.0058
6 17 6.0 0.30 1.95 0.74 199 75 43000 606 LLU 0.0058
17 6.0 0.30 1.95 0.74 199 75 43000 606 ZZ 0.0058
19 6.0 0.30 2.60 1.05 265 107 35000 43000 626 0.0081
19 6.0 0.30 2.60 1.05 265 107 35000 626 LLU 0.0081
19 6.0 0.30 2.60 1.05 265 107 35000 626 ZZ 0.0081
14 3.5 0.15 1.15 0.51 117 52 45000 54000 687 0.0020

14 5.0 0.15 1.15 0.51 117 52 45000 687 LLU 0.0020
14 5.0 0.15 1.15 0.51 117 52 45000 687 ZZ 0.0020
19 6.0 0.30 2.60 1.05 265 107 40000 47000 607 0.0076
7 19 6.0 0.30 2.60 1.05 265 107 40000 607 LLU 0.0076
19 6.0 0.30 2.60 1.05 265 107 40000 607 ZZ 0.0076
22 7.0 0.30 3.30 1.35 337 138 31000 37000 627 0.0130
22 7.0 0.30 3.30 1.35 337 138 31000 627 LLU 0.0130
22 7.0 0.30 3.30 1.35 337 138 31000 627 ZZ 0.0130
30
8~9mm
shielded
d D B rs min Cr Cor Cr Cor type
16 4.00 0.20 1.60 0.71 163 72 42000 50000 688 0.0032

16 5.0 0.20 1.60 0.71 163 72 42000 688 LLU 0.0032
16 5.0 0.20 1.60 0.71 163 72 42000 688 ZZ 0.0032
22 7.0 0.30 3.30 1.35 342 143 34000 41000 608 0.0120
8 22 7.0 0.30 3.30 1.35 342 143 34000 608 LLU 0.0120
22 7.0 0.30 3.30 1.35 342 143 34000 608 ZZ 0.0120
24 8.0 0.30 3.35 1.40 342 143 28000 35000 628 0.0180
24 8.0 0.30 3.35 1.40 342 143 28000 628 LLU 0.0180
24 8.0 0.30 3.35 1.40 342 143 28000 628 ZZ 0.0180
17 4.0 0.20 1.35 0.66 138 67 39000 46000 689 0.0035

17 5.0 0.20 1.35 0.66 138 67 39000 689 ZZ 0.0035
17 5.0 0.20 1.35 0.66 138 67 39000 689 LLU 0.0035
24 7.0 0.30 3.35 1.40 342 143 33000 40000 609 0.0150
9 24 7.0 0.30 3.35 1.40 342 143 33000 609 LLU 0.0150
24 7.0 0.30 3.35 1.40 342 143 33000 609 ZZ 0.0150
26 8.0 0.60 4.55 1.95 464 199 27000 33000 629 0.0200
26 8.0 0.60 4.55 1.95 464 199 27000 629 LLU 0.0200
26 8.0 0.60 4.55 1.95 464 199 27000 629 ZZ 0.0200
31
10~22mm
d D B rs min Cr Cor Cr Cor
19 5 0.3 1.830 0.925 187 94 32 000 38 000 6800 ZZ LLU — — 0.005

22 6 0.3 2.700 1.270 275 129 30 000 36 000 6900 ZZ LLU — — 0.009
10 26 8 0.3 4.550 1.960 465 200 29 000 34 000 6000 ZZ LLU — — 0.019
30 9 0.6 5.100 2.390 520 244 25 000 30 000 6200 ZZ LLU — — 0.032
35 11 0.6 8.200 3.500 835 355 23 000 27 000 6300 ZZ LLU — — 0.053
21 5 0.3 1.920 1.040 195 106 29 000 35 000 6801 ZZ LLU — — 0.006
24 6 0.3 2.890 1.460 295 149 27 000 32 000 6901 ZZ LLU — — 0.011
12 28 8 0.3 5.100 2.390 520 244 26 000 30 000 6001 ZZ LLU — — 0.021
32 10 0.6 6.100 2.750 620 280 22 000 26 000 6201 ZZ LLU — NR 0.037
37 12 1.0 9.700 4.200 990 425 20 000 24 000 6301 ZZ LLU — — 0.060
24 5 0.3 2.080 1.260 212 128 26 000 31 000 6802 ZZ LLU — — 0.007
28 7 0.3 3.650 2.000 375 204 24 000 28 000 6902 ZZ LLU — — 0.016
15 32 9 0.3 5.600 2.830 570 289 22 000 26 000 6002 ZZ LLU — — 0.030
35 11 0.6 7.750 3.600 790 365 19 000 23 000 6202 ZZ LLU — — 0.045
42 13 1.0 11.400 5.450 1 170 555 17 000 21 000 6302 ZZ LLU — — 0.082
26 5 0.3 2.230 1.460 227 149 24 000 28 000 6803 ZZ LLU — — 0.008
30 7 0.3 4.650 2.580 475 263 22 000 26 000 6903 ZZ LLU — — 0.018
35 8 0.3 6.800 3.350 695 345 20 000 24 000 16003 — — — — 0.032
17 35 10 0.3 6.800 3.350 695 345 20 000 24 000 6003 ZZ LLU — — 0.039
40 12 0.6 9.600 4.600 980 465 18 000 21 000 6203 ZZ LLU — — 0.066
47 14 1.0 13.500 6.550 1 380 665 16 000 19 000 6303 ZZ LLU — — 0.115
62 17 1.1 22.700 10.800 2 320 1 100 14 000 16 000 6403 ZZ LLU — — 0.270
32 7 0.3 4.000 2.470 410 252 21 000 25 000 6804 ZZ LLU — — 0.019
37 9 0.3 6.400 3.700 650 375 19 000 23 000 6904 ZZ LLU — — 0.036
42 8 0.3 7.900 4.500 810 455 18 000 21 000 16004 — — 0.051
20 42 12 0.6 9.400 5.050 955 515 18 000 21 000 6004 ZZ LLU — — 0.069
47 14 1.0 12.800 6.650 1 310 680 16 000 18 000 6204 ZZ LLU — NR 0.106
52 15 1.1 15.900 7.900 1 620 805 14 000 17 000 6304 ZZ LLU N NR 0.144
72 19 1.1 28.500 13.900 2 900 1 420 12 000 14 000 6404 — — — — 0.400
44 12 0.6 9.400 5.050 955 515 17 000 20 000 60/22 ZZ LLU — — 0.074
22 50 14 1.0 12.900 6.800 1 320 690 14 000 17 000 62/22 ZZ LLU — — 0.117
56 16 1.1 18.400 9.250 1 880 945 13 000 15 000 63/22 ZZ LLU — — 0.176
32
25~40mm
37 7 0.3 4.300 2.950 435 300 18 000 21 000 6805 ZZ LLU — — 0.022
42 9 0.3 7.050 4.550 715 460 16 000 19 000 6905 ZZ LLU — — 0.042
47 8 0.3 8.350 5.100 855 520 15 000 18 000 16005 — — — — 0.060
25 47 12 0.6 10.100 5.850 1 030 595 15 000 18 000 6005 ZZ LLU — — 0.080
52 15 1.0 14.000 7.850 1 430 800 13 000 15 000 6205 ZZ LLU — NR 0.128
62 17 1.1 21.200 10.900 2 160 1 110 12 000 14 000 6305 ZZ LLU — NR 0.232
80 21 1.5 34.500 17.500 3 550 1 780 10 000 12 000 6405 ZZ — — — 0.530
52 12 0.6 12.500 7.400 1 270 755 14 000 16 000 60/28 ZZ LLU — — 0.098
28 58 16 1.0 17.900 9.750 1 830 995 12 000 14 000 62/28 ZZ LLU — — 0.171
68 18 1.1 26.700 14.000 2 730 1 430 11 000 13 000 63/28 ZZ LLU — NR 0.284
42 7 0.3 4.700 3.650 480 370 15 000 18 000 6806 ZZ LLU — — 0.026
47 9 0.3 7.250 5.000 740 510 14 000 17 000 6906 ZZ LLU — — 0.048
55 9 0.3 11.200 7.350 1 150 750 13 000 15 000 16006 — — — — 0.091
30 55 13 1.0 13.200 8.300 1 350 845 13 000 15 000 6006 ZZ LLU — — 0.116
62 16 1.0 19.500 11.300 1 980 1 150 11 000 13 000 6206 ZZ LLU — NR 0.199
72 19 1.1 26.700 15.000 2 720 1 530 10 000 12 000 6306 ZZ LLU N NR 0.360
90 23 1.5 43.500 23.900 4 400 2 440 8 800 10 000 6406 — — — — 0.735
58 13 1.0 11.800 8.050 1 200 820 12 000 15 000 60/32 ZZ LLU — — 0.129
32 65 17 1.0 20.700 11.600 2 110 1 190 11 000 12 000 62/32 ZZ LLU — — 0.226
75 20 1.1 29.800 16.900 3 050 1 730 9 500 11 000 63/32 ZZ LLU — NR 0.382
47 7 0.3 4.900 4.050 500 410 13 000 16 000 6807 ZZ LLU — — 0.029
55 10 0.6 9.550 6.850 975 695 12 000 15 000 6907 ZZ LLU — — 0.074
62 9 0.3 11.700 8.200 1 190 835 12 000 14 000 16007 — — — — 0.110
35 62 14 1.0 16.000 10.300 1 630 1 050 12 000 14 000 6007 ZZ LLU — — 0.155
72 17 1.1 25.700 15.300 2 620 1 560 9 800 11 000 6207 ZZ LLU — NR 0.288
80 21 1.5 33.500 19.100 3 400 1 950 8 800 10 000 6307 ZZ LLU — NR 0.457
100 25 1.5 55.000 31.000 5 600 3 150 7 800 9 100 6407 — — — — 0.952
52 7 0.3 5.100 4.400 520 445 12 000 14 000 6808 ZZ LLU — — 0.033
62 12 0.6 12.200 8.900 1 240 910 11 000 13 000 6908 ZZ LLU — — 0.110
68 9 0.3 12.600 9.650 1 290 985 10 000 12 000 16008 — — — — 0.125
40 68 15 1.0 16.800 11.500 1 710 1 170 10 000 12 000 6008 ZZ LLU — — 0.190
80 18 1.1 29.100 17.800 2 970 1 820 8 700 10 000 6208 ZZ LLU — NR 0.366
90 23 1.5 40.500 24.000 4 150 2 450 7 800 9 200 6308 ZZ LLU — NR 0.630
110 27 2.0 63.500 36.500 6 500 3 750 7 000 8 200 6408 — — — — 1.230
33
45~65mm
58 7 0.3 5.350 4.950 550 500 11 000 12 000 6809 ZZ LLU — — 0.040
68 12 0.6 13.100 10.400 1 330 1 060 9 800 12 000 6909 ZZ LLU — — 0.128
75 10 0.6 12.900 10.500 1 320 1 070 9 200 11 000 16009 — — — — 0.171
45 75 16 1.0 21.000 15.100 2 140 1 540 9 200 11 000 6009 ZZ LLU — — 0.237
85 19 1.1 32.500 20.400 3 350 2 080 7 800 9 200 6209 ZZ LLU — — 0.398
100 25 1.5 53.000 32.000 5 400 3 250 7 000 8 200 6309 ZZ LLU — NR 0.814
120 29 2.0 77.000 45.000 7 850 4 600 6 300 7 400 6409 ZZ — — — 1.530
65 7 0.3 6.600 6.100 670 620 9 600 11 000 6810 ZZ LLU — — 0.052
72 12 0.6 13.400 11.200 1 370 1 140 8 900 11 000 6910 ZZ LLU — — 0.132
80 10 0.6 13.200 11.300 1 350 1 150 8 400 9 800 16010 — — — — 0.180
50 80 16 1.0 21.800 16.600 2 230 1 690 8 400 9 800 6010 ZZ LLU — — 0.261
90 20 1.1 35.000 23.200 3 600 2 370 7 100 8 300 6210 ZZ LLU N NR 0.454
110 27 2.0 62.000 38.500 6 300 3 900 6 400 7 500 6310 ZZ LLU N NR 1.070
130 31 2.1 83.000 49.500 8 450 5 050 5 700 6 700 6410 — — — NR 1.880
72 9 0.3 8.800 8.100 900 825 8 700 10 000 6811 ZZ LLU — — 0.083
80 13 1.0 16.000 13.300 1 630 1 350 8 200 9 600 6911 ZZ LLU — — 0.180
90 11 0.6 18.600 15.300 1 900 1 560 7 700 9 000 16011 — — — — 0.258
55 90 18 1.1 28.300 21.200 2 880 2 170 7 700 9 000 6011 ZZ LLU — — 0.388
100 21 1.5 43.500 29.200 4 450 2 980 6 400 7 600 6211 ZZ LLU — NR 0.601
120 29 2.0 71.500 45.000 7 300 4 600 5 800 6 800 6311 ZZ LLU — NR 1.370
140 33 2.1 89.000 54.000 9 050 5 500 5 200 6 100 6411 — — N — 2.290
78 10 0.3 11.500 10.600 1 170 1 080 8 000 9 400 6812 ZZ LLU — — 0.106
85 13 1.0 16.400 14.300 1 670 1 450 7 600 8 900 6912 ZZ LLU — — 0.193
95 11 0.6 20.000 17.500 2 040 1 780 7 000 8 300 16012 — — — — 0.283
60 95 18 1.1 29.500 23.200 3 000 2 370 7 000 8 300 6012 ZZ LLU — — 0.414
110 22 1.5 52.500 36.000 5 350 3 700 6 000 7 000 6212 ZZ LLU — NR 0.783
130 31 2.1 82.000 52.000 8 350 5 300 5 400 6 300 6312 ZZ LLU — NR 1.730
150 35 2.1 102.000 64.500 10 400 6 550 4 800 5 700 6412 — — N NR 2.770
85 10 0.6 11.600 11.000 1 180 1 120 7 400 8 700 6813 ZZ LLU — — 0.128
90 13 1.0 17.400 16.100 1 770 1 640 7 000 8 200 6913 ZZ LLU — — 0.206
100 11 0.6 20.500 18.700 2 090 1 910 6 500 7 700 16013 — — — — 0.307
65 100 18 1.1 30.500 25.200 3 100 2 570 6 500 7 700 6013 ZZ LLU — — 0.421
120 23 1.5 57.500 40.000 5 850 4 100 5 500 6 500 6213 ZZ LLU — — 0.990
140 33 2.1 92.500 60.000 9 450 6 100 4 900 5 800 6313 ZZ LLU — — 2.080
160 37 2.1 111.000 72.500 11 300 7 400 4 400 5 200 6413 — — — — 3.300
34
70~90mm
90 10 0.6 12.100 11.900 1 230 1 220 6 900 8 100 6814 ZZ LLU — — 0.137
100 16 1.0 23.700 21.200 2 420 2 160 6 500 7 700 6914 ZZ LLU — — 0.334
110 13 0.6 24.400 22.600 2 480 2 300 6 100 7 100 16014 — — — — 0.441
70 110 20 1.1 38.000 31.000 3 900 3 150 6 100 7 100 6014 ZZ LLU — — 0.604
125 24 1.5 62.000 44.000 6 350 4 500 5 100 6 000 6214 ZZ LLU — — 1.070
150 35 2.1 104.000 68.000 10 600 6 950 4 600 5 400 6314 ZZ LLU — NR 2.520
180 42 3.0 128.000 89.500 13 100 9 100 4 100 4 800 6414 — — — — 4.830
95 10 0.6 12.500 12.900 1 280 1 310 6 400 7 600 6815 ZZ LLU — — 0.145
105 16 1.0 24.400 22.600 2 480 2 300 6 100 7 200 6915 ZZ LLU — — 0.353
115 13 0.6 25.000 24.000 2 540 2 450 5 700 6 700 16015 — — — — 0.464
75 115 20 1.1 39.500 33.500 4 050 3 400 5 700 6 700 6015 ZZ LLU — — 0.649
130 25 1.5 66.000 49.500 6 750 5 050 4 800 5 600 6215 ZZ LLU — — 1.180
160 37 2.1 113.000 77.000 11 600 7 850 4 300 5 000 6315 ZZ LLU — — 3.020
190 45 3.0 138.000 99.000 14 000 10 100 3 800 4 500 6415 — — — — 5.720
100 10 0.6 12.700 13.300 1 290 1 360 6 000 7 100 6816 ZZ LLU — — 0.154
110 16 1.0 24.900 24.000 2 540 2 450 5 700 6 700 6916 ZZ LLU — — 0.373
125 14 0.6 25.400 25.100 2 590 2 560 5 300 6 200 16016 — — — — 0.597
80 125 22 1.1 47.500 40.000 4 850 4 050 5 300 6 200 6016 ZZ LLU — — 0.854
140 26 2.0 72.500 53.000 7 400 5 400 4 500 5 300 6216 ZZ LLU — — 1.400
170 39 2.1 123.000 86.500 12 500 8 850 4 000 4 700 6316 ZZ LLU — — 3.590
200 48 3.0 164.000 125.000 16 700 12 800 3 600 4 200 6416 — — — — 6.760
110 13 1.0 18.700 19.000 1 910 1 940 5 700 6 700 6817 ZZ LLU — — 0.270
120 18 1.1 32.000 29.600 3 250 3 000 5 400 6 300 6917 ZZ LLU — — 0.536
130 14 0.6 25.900 26.200 2 640 2 670 5 000 5 900 16017 — — — — 0.626
85 130 22 1.1 49.500 43.000 5 050 4 400 5 000 5 900 6017 ZZ LLU — — 0.890
150 28 2.0 83.500 64.000 8 500 6 500 4 200 5 000 6217 ZZ LLU — — 1.790
180 41 3.0 133.000 97.000 13 500 9 850 3 800 4 500 6317 ZZ LLU — — 4.230
115 13 1.0 19.000 19.700 1 940 2 010 5 400 6 300 6818 ZZ LLU — — 0.285
125 18 1.1 33.000 31.500 3 350 3 200 5 100 6 000 6918 ZZ LLU — — 0.554
140 16 1.0 33.500 33.500 3 400 3 400 4 700 5 600 16018 — — — — 0.848
90 140 24 1.5 58.000 49.500 5 950 5 050 4 700 5 600 6018 ZZ LLU — — 1.020
160 30 2.0 96.000 71.500 9 800 7 300 4 000 4 700 6218 ZZ LLU — — 2.150
190 43 3.0 143.000 107.000 14 500 10 900 3 600 4 200 6318 ZZ LLU — — 4.910
35
95~130mm
120 13 1.0 19.300 20.500 1 970 2 090 5 000 5 900 6819 ZZ LLU — — 0.300
130 18 1.1 33.500 33.500 3 450 3 400 4 800 5 700 6919 ZZ LLU — — 0.579
145 16 1.0 34.500 35.000 3 500 3 550 4 500 5 300 16019 — — — — 0.885
95 145 24 1.5 60.500 54.000 6 150 5 500 4 500 5 300 6019 ZZ LLU — — 1.080
170 32 2.1 109.000 82.000 11 100 8 350 3 700 4 400 6219 ZZ LLU — — 2.620
200 45 3.0 153.000 119.000 15 600 12 100 3 300 3 900 6319 ZZ — — — 5.670
125 13 1.0 19.600 21.200 2 000 2 160 4 800 5 600 6820 ZZ LLU — — 0.313
140 20 1.1 41.000 39.500 4 200 4 050 4 500 5 300 6920 ZZ LLU — — 0.785
150 16 1.0 35.000 36.500 3 600 3 750 4 200 5 000 16020 — — — — 0.910
100 150 24 1.5 60.000 54.000 6 150 5 500 4 200 5 000 6020 ZZ LLU — — 1.150
180 34 2.1 122.000 93.000 12 500 9 450 3 500 4 200 6220 ZZ LLU — — 3.140
215 47 3.0 173.000 141.000 17 600 14 400 3 200 3 700 6320 ZZ — — — 7.000
130 13 1.0 19.800 22.000 2 020 2 240 4 600 5 400 6821 — — — — 0.330
145 20 1.1 42.500 42.000 4 300 4 300 4 300 5 100 6921 ZZ LLU — — 0.816
160 18 1.0 52.000 50.500 5 300 5 150 4 000 4 700 16021 — — — — 1.200
105 160 26 2.0 72.500 65.500 7 400 6 700 4 000 4 700 6021 ZZ LLU — — 1.590
190 36 2.1 133.000 105.000 13 600 10 700 3 400 4 000 6221 ZZ — — — 3.700
225 49 3.0 184.000 153.000 18 700 15 700 3 000 3 600 6321 ZZ — — — 8.050
140 16 1.0 24.900 28.200 2 540 2 880 4 300 5 100 6822 — — — — 0.515
150 20 1.1 43.500 44.500 4 450 4 550 4 100 4 800 6922 ZZ LLU — — 0.849
170 19 1.0 57.500 56.500 5 850 5 800 3 800 4 500 16022 — — — — 1.460
110 170 28 2.0 82.000 73.000 8 350 7 450 3 800 4 500 6022 ZZ LLU — — 1.960
200 38 2.1 144.000 117.000 14 700 11 900 3 200 3 800 6222 ZZ — — — 4.360
240 50 3.0 205.000 179.000 20 900 18 300 2 900 3 400 6322 ZZ — — — 9.540
150 16 1.0 28.900 33.000 2 950 3 350 4 000 4 700 6824 — — — — 0.555
165 22 1.1 53.000 54.000 5 400 5 500 3 800 4 400 6924 — — — — 1.150
120 180 19 1.0 63.000 63.500 6 450 6 450 3 500 4 100 16024 — — — — 1.560
180 28 2.0 85.000 79.500 8 650 8 100 3 500 4 100 6024 ZZ LLU — — 2.070
215 40 2.1 155.000 131.000 15 900 13 400 2 900 3 400 6224 ZZ LLU — — 5.150
260 55 3.0 207.000 185.000 21 100 18 800 2 600 3 100 6324 — — — — 12.400
165 18 1.1 37.000 41.000 3 750 4 200 3 700 4 300 6826 — — — — 0.800
130 180 24 1.5 65.000 67.500 6 650 6 850 3 500 4 100 6926 — — — — 1.520
200 22 1.1 80.000 79.500 8 150 8 100 3 200 3 800 16026 — — — — 2.310
36
130~150mm
200 33 2.0 106.000 101.000 10 800 10 300 3 200 3 800 6026 ZZ LLU — — 3.160
130 230 40 3.0 167.000 146.000 17 000 14 900 2 700 3 100 6226 — — — — 5.820
280 58 4.0 229.000 214.000 23 400 21 800 2 400 2 800 6326 — — — — 15.300
175 18 1.1 38.500 44.500 3 900 4 550 3 400 4 000 6828 — — — — 0.850
190 24 1.5 66.500 71.500 6 800 7 300 3 200 3 800 6928 — — — — 1.620
210 22 1.1 82.000 85.000 8 350 8 650 3 000 3 500 16028 — — — — 2.450
140 210 33 2.0 110.000 109.000 11 200 11 100 3 000 3 500 6028 ZZ LLU — — 3.350
250 42 3.0 166.000 150.000 17 000 15 300 2 500 2 900 6228 — — — — 7.570
300 62 4.0 253.000 246.000 25 800 25 100 2 200 2 600 6328 — — — — 18.500
190 20 1.1 47.500 55.000 4 850 5 600 3 100 3 700 6830 — — — — 1.160
210 28 2.0 85.000 90.500 8 650 9 200 3 000 3 500 6930 — — — — 2.470
225 24 1.1 96.500 101.000 9 850 10 300 2 800 3 200 16030 — — — — 3.070
150
225 35 2.1 126.000 126.000 12 800 12 800 2 800 3 200 6030 ZZ LLU — — 4.080
270 45 3.0 176.000 168.000 18 000 17 100 2 300 2 700 6230 — — — — 9.410
320 65 4.0 274.000 284.000 28 000 28 900 2 100 2 400 6330 — — — — 22.000
37
10~35mm
30 9 0.6 5.55 1.19 570 121 22 000 28 000 1200 — 0.033

30 14 0.6 7.45 1.59 760 162 24 000 28 000 2200 — 0.042
10 35 11 0.6 7.35 1.62 750 165 20 000 24 000 1300 — 0.057
35 17 0.6 9.20 2.01 935 205 18 000 22 000 2300 — 0.077
32 10 0.6 5.70 1.27 580 130 22 000 26 000 1201 — 0.039

32 14 0.6 7.75 1.73 790 177 22 000 26 000 2201 — 0.048
12 37 12 1.0 9.65 2.16 985 221 18 000 22 000 1301 — 0.066
37 17 1.0 12.10 2.73 1 240 278 17 000 22 000 2301 — 0.082
35 11 0.6 7.60 1.75 775 179 18 000 22 000 1202 — 0.051

35 14 0.6 7.80 1.85 795 188 18 000 22 000 2202 — 0.055
15 42 13 1.0 9.70 2.29 990 234 16 000 20 000 1302 — 0.093
42 17 1.0 12.30 2.91 1 250 296 14 000 18 000 2302 — 0.108
40 12 0.6 8.00 2.01 815 205 16 000 20 000 1203 — 0.072

40 16 0.6 9.95 2.42 1 010 247 16 000 20 000 2203 — 0.085
17 47 14 1.0 12.70 3.20 1 300 325 14 000 17 000 1303 — 0.130
47 19 1.0 14.70 3.55 1 500 365 13 000 16 000 2303 — 0.150
47 14 1.0 10.0 2.61 1 020 266 14 000 17 000 1204 1204K 0.120
47 18 1.0 12.8 3.30 1 310 340 14 000 17 000 2204 2204K 0.133
20 52 15 1.1 12.6 3.35 1 280 340 12 000 15 000 1304 1304K 0.150
52 21 1.1 18.5 4.70 1 880 480 11 000 14 000 2304 2304K 0.193
52 15 1.0 12.2 3.30 1 250 335 12 000 14 000 1205 1205K 0.140
52 18 1.0 12.4 3.45 1 270 350 12 000 14 000 2205 2205K 0.150
25 62 17 1.1 18.2 5.00 1 850 510 10 000 13 000 1305 1305K 0.255
62 24 1.1 24.9 6.60 2 530 675 9 500 12 000 2305 2305K 0.319
62 16 1.0 15.8 4.65 1 610 475 10 000 12 000 1206 1206K 0.220
62 20 1.0 15.3 4.55 1 560 460 10 000 12 000 2206 2206K 0.249
30
72 19 1.1 21.4 6.30 2 190 645 8 500 11 000 1306 1306K 0.385
72 27 1.1 32.0 8.75 3 250 895 8 000 10 000 2306 2306K 0.480
72 17 1.1 15.9 5.10 1 620 520 8 500 10 000 1207 1207K 0.320
35 72 23 1.1 21.7 6.60 2 210 675 8 500 10 000 2207 2207K 0.378
K-Indicates bearings with tapered bore with ratio 1:12

38
35~70mm
80 21 1.5 25.3 7.85 2 580 800 7 500 9 500 1307 1307K 0.510
35 80 31 1.5 40.0 11.30 4 100 1 150 7 100 9 000 2307 2307K 0.642
80 18 1.1 19.3 6.50 1 970 665 7 500 9 000 1208 1208K 0.415
80 23 1.1 22.4 7.35 2 290 750 7 500 9 000 2208 2208K 0.477
40 90 23 1.5 29.8 9.70 3 050 990 6 700 8 500 1308 1308K 0.715
90 33 1.5 45.5 13.50 4 650 1 380 6 300 8 000 2308 2308K 0.889
85 19 1.1 22.0 7.35 2 240 750 7 100 8 500 1209 1209K 0.465
85 23 1.1 23.3 8.15 2 380 830 7 100 8 500 2209 2209K 0.522
45 100 25 1.5 38.5 12.70 3 900 1 300 6 000 7 500 1309 1309K 0.955
100 36 1.5 55.0 16.70 5 600 1 700 5 600 7 100 2309 2309K 1.200
90 20 1.1 22.8 8.10 2 330 830 6 300 8 000 1210 1210K 0.525
90 23 1.1 23.3 8.45 2 380 865 6 300 8 000 2210 2210K 0.564
50 110 27 2.0 43.5 14.10 4 450 1 440 5 600 6 700 1310 1310K 1.250
110 40 2.0 65.0 20.20 6 650 2 060 5 000 6 300 2310 2310K 1.580
100 21 1.5 26.9 10.00 2 750 1 020 6 000 7 100 1211 1211K 0.705
100 25 1.5 26.7 9.90 2 720 1 010 6 000 7 100 2211 2211K 0.746
55 120 29 2.0 51.5 17.90 5 250 1 820 5 000 6 300 1311 1311K 1.600
120 43 2.0 76.5 24.00 7 800 2 450 4 800 6 000 2311 2311K 2.030
110 22 1.5 30.5 11.50 3 100 1 180 5 300 6 300 1212 1212K 0.900
110 28 1.5 34.0 12.60 3 500 1 290 5 300 6 300 2212 2212K 1.030
60 130 31 2.1 57.5 20.80 5 900 2 130 4 500 5 600 1312 1312K 2.030
130 46 2.1 88.5 28.30 9 000 2 880 4 300 5 300 2312 2312K 2.570
120 23 1.5 31.0 12.50 3 150 1 280 4 800 6 000 1213 1213K 1.150
120 31 1.5 43.5 16.40 4 450 1 670 4 800 6 000 2213 2213K 1.400
65
140 33 2.1 62.5 22.90 6 350 2 330 4 300 5 300 1313 1313K 2.540
140 48 2.1 97.0 32.50 9 900 3 300 3 800 4 800 2313 2313K 3.200
125 24 1.5 35.0 13.80 3 550 1 410 4 800 5 600 1214 1214K 1.300
125 31 1.5 44.0 17.10 4 500 1 740 4 500 5 600 2214 2214K 1.520
70
150 35 2.1 75.0 27.70 7 650 2 830 4 000 5 000 1314 1314K 3.190
150 51 2.1 111.0 37.50 11 300 3 850 3 600 4 500 2314 2314K 3.900

39
75~100mm
130 25 1.5 39.0 15.7 4 000 1 600 4 300 5 300 1215 1215K 1.410
130 31 1.5 44.5 17.8 4 550 1 820 4 300 5 300 2215 2215K 1.600
75 160 37 2.1 80.0 30.0 8 150 3 050 3 800 4 500 1315 1315K 3.650
160 55 2.1 125.0 43.0 12 700 4 400 3 400 4 300 2315 2315K 4.770
140 26 2.0 40.0 17.0 4 100 1 730 4 000 5 000 1216 1216K 1.730
140 33 2.0 49.0 19.9 5 000 2 030 4 000 5 000 2216 2216K 1.970
80 170 39 2.1 89.0 33.0 9 100 3 400 3 600 4 300 1316 1316K 4.310
170 58 2.1 130.0 45.0 13 200 4 600 3 200 4 000 2316 2316K 5.540
150 28 2.0 49.5 20.8 5 050 2 120 3 800 4 500 1217 1217K 2.090
150 36 2.0 58.5 23.6 5 950 2 400 3 800 4 800 2217 2217K 2.480
85 180 41 3.0 98.5 38.0 10 000 3 850 3 400 4 000 1317 1317K 5.130
180 60 3.0 142.0 51.5 14 500 5 250 3 000 3 800 2317 2317K 6.560
160 30 2.0 57.5 23.5 5 850 2 400 3 600 4 300 1218 1218K 2.550
160 40 2.0 70.5 28.7 7 200 2 930 3 600 4 300 2218 2218K 3.130
90 190 43 3.0 117.0 44.5 12 000 4 550 3 200 3 800 1318 1318K 5.940
190 64 3.0 154.0 57.5 15 700 5 850 2 800 3 600 2318 2318K 7.760
170 32 2.1 64.0 27.1 6 550 2 770 3 400 4 000 1219 1219K 3.210
170 43 2.1 84.0 34.5 8 550 3 500 3 400 4 000 2219 2219K 3.870
95 200 45 3.0 129.0 51.0 13 200 5 200 3 000 3 600 1319 1319K 6.840
200 67 3.0 161.0 64.5 16 400 6 550 2 800 3 400 2319 2319K 9.010
180 34 2.1 69.5 29.7 7 100 3 050 3 200 3 800 1220 1220K 3.820
180 46 2.1 94.5 38.5 9 650 3 900 3 200 3 800 2220 2220K 4.530
100 215 47 3.0 140.0 57.5 14 300 5 850 2 800 3 400 1320 1320K 8.460
215 73 3.0 187.0 79.0 19 100 8 050 2 400 3 200 2320 2320K 11.600

40
Double Row Angular Contact Ball Bearings
Filling slot
10~60mm
10 30 14.3 0.6 8.00 5.79 810.00 590.00 16000 19000 3200 0.052
12 32 15.9 0.6 9.65 7.13 985.00 725.00 14000 17000 3201 0.063
35 15.9 0.6 9.05 7.43 920.00 758.00 13000 16000 3202 0.072
15 42 19.0 1.0 15.20 11.80 1550.00 1200.00 10600 12600 3302 0.132
40 17.5 0.6 12.60 10.60 1285.00 1080.00 11000 13000 3203 0.100
17 47 22.2 1.0 20.70 16.40 2110.00 1674.00 9400 11000 3303 0.192
47 20.6 1.0 17.30 14.90 1765.00 1520.00 9400 11000 3204 0.170
20 52 22.2 1.1 20.80 18.30 2120.00 1868.00 8400 10000 3304 0.230
52 20.6 1.0 19.00 18.20 1938.00 1858.00 8400 10000 3205 0.190
25 62 25.4 1.1 28.90 26.40 2950.00 2695.00 7100 8400 3305 0.369
62 23.8 1.0 27.20 26.90 2777.00 2745.00 7100 8400 3206 0.320
30 72 30.2 1.1 38.20 35.90 3900.00 3665.00 6000 7100 3306 0.585
72 27 1.1 36.80 37.50 3755.00 3828.00 6000 7100 3207 0.480

35 80 34.9 1.5 48.60 46.80 4960.00 4778.00 5300 6300 3307 0.816
80 30.2 1.1 42.00 43.90 4288.00 4480.00 5300 6300 3208 0.650
40 90 36.5 1.5 54.10 53.80 5520.00 5490.00 4700 5600 3308 1.070
85 30.2 1.1 45.40 51.30 4635.00 5235.00 5000 6000 3209 0.710
45 100 39.7 1.5 66.10 67.30 6748.00 6870.00 4200 5000 3309 1.420
90 30.2 1.1 45.10 52.10 4604.00 5319.00 4500 5300 3210 0.760
50 110 44.4 2.0 86.10 88.60 8790.00 9045.00 3800 4500 3310 1.950
100 33.3 1.5 50.90 60.20 5195.00 6145.00 4200 5000 3211 1.050
55 20
1 49.2 2.0 94.80 107.00 9679.00 10924.00 3300 4000 3311 2.530
110 36.5 1.5 64.00 76.80 6534.00 7840.00 3800 4500 3212 1.400
60 130 54.0 2.1 111.00 127.00 11333.00 12965.00 3200 3800 3312 3.240
41
Filling slot
65~75mm
120 38.1 1.5 76.40 97.40 7800.00 9944.00 3500 4200 3213 1.750
65 140 58.7 2.1 129.00 148.00 13170.00 15110.00 3000 3500 3313 4.080
125 39.7 1.5 75.80 98.30 7739.00 10035.00 3200 3800 3214 1.920
70 150 63.5 2.1 149.00 165.00 15210.00 16845.00 2700 3600 3314 5.040
130 41.3 1.5 83.60 109.00 8535.00 11128.00 3200 3800 3215 2.100
75 160 68.3 2.1 169.00 189.00 17254.90 19296.90 2500 3300 3315 6.160
42
Contact sealed type

(LLU)
10~60mm
10 30 14.3 0.6 7.15 3.90 730 400 17 000 22 000 5200 ZZ LLU 14.5 0.05
12 32 15.9 0.6 10.5 5.80 1 070 590 15 000 20 000 5201 ZZ LLU 16.7 0.06
35 15.9 0.6 11.7 7.05 1 190 715 13 000 17 000 5202 ZZ LLU 18.3 0.07
15 42 19.0 1.0 17.6 10.2 1 800 1 040 11 000 15 000 5302 ZZ LLU 22.0 0.11
40 17.5 0.6 14.6 9.05 1 490 920 11 000 15 000 5203 ZZ LLU 20.8 0.09
17 47 22.2 1.0 21.0 12.6 2 140 1 280 10 000 13 000 5303 ZZ LLU 25.0 0.14
47 20.6 1.0 19.6 12.4 2 000 1 270 10 000 13 000 5204 ZZ LLU 24.3 0.12
20 52 22.2 1.1 24.6 15.0 2 510 1 530 9 000 12 000 5304 ZZ LLU 26.7 0.23
52 20.6 1 21.3 14.7 2 170 1 500 8 500 11 000 5205 ZZ LLU 26.8 0.19
25 62 25.4 1.1 32.5 20.7 3 350 2 110 7 500 10 000 5305 ZZ LLU 31.8 0.34
62 23.8 1.0 29.6 21.1 3 000 2 150 7 100 9 500 5206 ZZ LLU 31.6 0.29
30 72 30.2 1.1 40.5 28.1 4 150 2 870 6 300 8 500 5306 ZZ LLU 36.5 0.51
72 27.0 1.1 39.0 28.7 4 000 2 920 6 300 8 000 5207 ZZ LLU 36.6 0.43
35 80 34.9 1.5 51.0 36.0 5 200 3 700 5 600 7 500 5307 ZZ LLU 41.6 0.79
80 30.2 1.1 44.0 33.5 4 500 3 400 5 600 7 100 5208 ZZ LLU 41.5 0.57
40 90 36.5 1.5 56.5 41.0 5 800 4 200 5 300 6 700 5308 ZZ LLU 45.5 1.05
85 30.2 1.1 49.5 38.0 5 050 3 900 5 000 6 700 5209 ZZ LLU 43.4 0.62
45 100 39.7 1.5 68.5 51.0 7 000 5 200 4 500 6 000 5309 ZZ LLU 50.6 1.40
90 30.2 1.1 53.0 43.5 5 400 4 400 4 800 6 000 5210 ZZ LLU 45.9 0.67
50
110 44.4 2 81.5 61.5 8 300 6 250 4 300 5 600 5310 ZZ LLU 55.6 1.95
100 33.3 1.5 56.0 49.0 5 700 5 000 4 300 5 600 5211 ZZ LLU 50.1 0.96
55
120 49.2 2 95.0 73.0 9 700 7 450 3 800 5 000 5311 ZZ LLU 60.6 2.30
110 36.5 1.5 69.0 62.0 7 150 6 300 3 800 5 000 5212 ZZ LLU 56.5 1.35
60
130 54.0 2.1 125.0 98.5 12 800 10 000 3 400 4 500 5312 ZZ LLU 69.2 3.15
43
Contact sealed type

(LLU)
65~75mm
120 38.1 1.5 76.5 69.0 7 800 7 050 3 600 4 500 5213 ZZ LLU 59.7 1.65
65 140 58.7 2.1 142.0 113.0 14 500 11 500 3 200 4 300 5313 ZZ LLU 72.8 3.85
125 39.7 1.5 94.0 82.0 9 600 8 400 3 400 4 500 5214 ZZ LLU 63.8 1.80
70 150 63.5 2.1 159.0 128.0 16 200 13 100 3 000 3 800 5314 ZZ LLU 78.3 4.90
75 130 41.3 1.5 93.5 83.0 9 550 8 500 3 200 4 300 5215 ZZ LLU 66.1 1.90
44
10~35mm
d D B rs min r1s min Cr Cor Cr Cor
30 9 0.6 0.3 5.45 2.74 555 279 28 000 37 000 7200 10.5 0.029
30 9 0.6 0.3 5.00 2.52 510 257 24 000 32 000 7200B 13.0 0.029
10 35 11 0.6 0.3 10.10 4.95 1 030 500 26 000 34 000 7300 12.0 0.040
35 11 0.6 0.3 9.50 4.60 970 470 22 000 29 000 7300B 15.0 0.041
32 10 0.6 0.3 7.60 3.95 775 405 25 000 33 000 7201 11.5 0.035
32 10 0.6 0.3 7.00 3.65 775 405 21 000 28 000 7201B 14.0 0.036
12 37 12 1.0 0.6 11.20 5.25 1 140 535 23 000 30 000 7301 13.0 0.044
37 12 1.0 0.6 10.50 4.95 1 080 505 19 000 26 000 7301B 16.5 0.045
35 11 0.6 0.3 9.05 4.70 925 480 22 000 29 000 7202 12.5 0.046
35 11 0.6 0.3 8.35 4.35 855 445 18 000 25 000 7202B 16.0 0.046
15
42 13 1.0 0.6 13.50 7.20 1 370 735 19 000 26 000 7302 15.0 0.055
42 13 1.0 0.6 12.50 6.65 1 270 680 17 000 22 000 7302B 19.0 0.057
40 12 0.6 0.3 12.00 6.60 1 220 675 19 000 26 000 7203 14.5 0.064
40 12 0.6 0.3 11.00 6.10 1 120 625 17 000 22 000 7203B 18.0 0.066
17 47 14 1.0 0.6 15.90 8.65 1 630 880 18 000 24 000 7303 16.0 0.107
47 14 1.0 0.6 14.80 8.00 1 510 820 15 000 20 000 7303B 20.5 0.109
47 14 1.0 0.6 14.50 8.40 1 480 855 17 000 23 000 7204 17.0 0.100
47 14 1.0 0.6 13.30 7.70 1 360 785 15 000 20 000 7204B 21.5 0.102
20 52 15 1.1 0.6 18.70 10.40 1 910 1 060 16 000 21 000 7304 18.0 0.138
52 15 1.1 0.6 17.30 9.65 1 770 985 13 000 18 000 7304B 22.5 0.141
52 15 1.0 0.6 16.20 10.30 1 650 1 050 14 000 19 000 7205 19.0 0.125
52 15 1.0 0.6 14.80 9.40 1 510 960 12 000 16 000 7205B 24.0 0.129
25 62 17 1.1 0.6 26.40 15.80 2 690 1 610 13 000 17 000 7305 21.0 0.230
62 17 1.1 0.6 24.40 14.60 2 490 1 490 11 000 15 000 7305B 27.0 0.234
62 16 1.0 0.6 22.50 14.80 2 300 1 510 12 000 16 000 7206 21.5 0.193
62 16 1.0 0.6 20.50 13.50 2 090 1 380 11 000 14 000 7206B 27.5 0.197
30 72 19 1.1 0.6 33.50 22.30 3 450 2 280 11 000 15 000 7306 24.5 0.345
72 19 1.1 0.6 31.00 20.50 3 150 2 090 9 600 13 000 7306B 31.5 0.352
72 17 1.1 0.6 29.70 20.10 3 050 2 050 11 000 14 000 7207 24.0 0.281
35 72 17 1.1 0.6 27.10 18.40 2 760 1 870 9 300 12 000 7207B 31.0 0.287
45
35~70mm
80 21 1.5 1.0 40.00 26.30 4 050 2 680 9 800 13 000 7307 27.0 0.462
35 80 21 1.5 1.0 36.50 24.20 3 750 2 470 8 400 11 000 7307B 34.5 0.469
80 18 1.1 0.6 35.50 25.10 3 600 2 560 9 600 13 000 7208 26.5 0.355
80 18 1.1 0.6 32.00 23.00 3 250 2 340 8 300 11 000 7208B 34.0 0.375
40 90 23 1.5 1.0 49.00 33.00 5 000 3 350 8 600 12 000 7308 30.5 0.625
90 23 1.5 1.0 45.00 30.50 4 550 3 100 7 400 9 900 7308B 39.0 0.636
85 19 1.1 0.6 39.50 28.70 4 050 2 930 8 700 12 000 7209 28.5 0.404
85 19 1.1 0.6 36.00 26.20 3 650 2 680 7 400 9 900 7209B 37.0 0.410
45 100 25 1.5 1.0 63.50 44.00 6 450 4 500 7 800 10 000 7309 33.5 0.837
100 25 1.5 1.0 58.50 40.00 5 950 4 100 6 600 8 900 7309B 43.0 0.854
90 20 1.1 0.6 41.50 31.50 4 200 3 200 7 900 10 000 7210 30.0 0.457
90 20 1.1 0.6 37.50 28.60 3 800 2 920 6 700 9 000 7210B 39.5 0.466
50 110 27 2.0 1.0 74.50 52.50 7 600 5 350 7 100 9 400 7310 36.5 1.090
110 27 2.0 1.0 68.00 48.00 6 950 4 950 6 000 8 100 7310B 47.0 1.110
100 21 1.5 1.0 51.00 39.50 5 200 4 050 7 100 9 500 7211 33.0 0.600
100 21 1.5 1.0 46.50 36.00 4 700 3 700 6 100 8 200 7211B 43.0 0.612
55 120 29 2.0 1.0 86.00 61.50 8 750 6 300 6 400 8 600 7311 40.0 1.390
120 29 2.0 1.0 79.00 56.50 8 050 5 800 5 500 7 300 7311B 52.0 1.420
110 22 1.5 1.0 61.50 49.00 6 300 5 000 6 600 8 800 7212 36.0 0.765
110 22 1.5 1.0 56.00 44.50 5 700 4 550 5 700 7 600 7212B 47.5 0.780
60 130 31 2.1 1.1 98.00 71.50 10 000 7 300 5 900 7 900 7312 43.0 1.740
130 31 2.1 1.1 90.00 66.00 9 200 6 700 5 100 6 800 7312B 56.0 1.770
120 23 1.5 1.0 70.50 58.00 7 150 5 900 6 100 8 100 7213 38.0 0.962
120 23 1.5 1.0 63.50 52.50 6 500 5 350 5 200 7 000 7213B 50.5 0.981
65
140 33 2.1 1.1 111.00 82.00 11 300 8 350 5 500 7 300 7313 46.0 2.110
140 33 2.1 1.1 102.00 75.00 10 400 7 700 4 700 6 300 7313B 59.5 2.150
125 24 1.5 1.0 76.50 63.50 7 800 6 500 5 700 7 600 7214 40.0 1.090
125 24 1.5 1.0 69.00 58.00 7 050 5 900 4 900 6 500 7214B 53.0 1.110
70
150 35 2.1 1.1 125.00 93.50 12 700 9 550 5 100 6 800 7314 49.5 2.560
150 35 2.1 1.1 114.00 86.00 11 700 8 800 4 400 5 800 7314B 63.5 2.610
46
75~100mm
130 25 1.5 1.0 79.00 68.50 8 050 7 000 5 300 7 100 7215 42.5 1.170
130 25 1.5 1.0 71.50 62.00 7 300 6 350 4 500 6 000 7215B 56.0 1.190
75 160 37 2.1 1.1 136.00 106.00 13 800 10 800 4 800 6 300 7315 52.5 3.070
160 37 2.1 1.1 125.00 97.50 12 700 9 900 4 100 5 400 7315B 68.0 3.130
140 26 2.0 1.0 89.00 76.00 9 100 7 750 5 000 6 600 7216 45.0 1.390
140 26 2.0 1.0 80.50 69.50 8 200 7 050 4 300 5 700 7216B 59.0 1.420
80 170 39 2.1 1.1 147.00 119.00 15 000 12 100 4 500 5 900 7316 55.5 3.650
170 39 2.1 1.1 135.00 109.00 13 800 11 100 3 800 5 100 7316B 72.0 3.720
150 28 2 1.0 99.50 88.50 10 100 9 050 4 700 6 200 7217 48.0 1.780
150 28 2 1.0 90.00 80.50 9 150 8 200 4 000 5 300 7217B 63.5 1.820
85 180 41 3 1.1 159.00 133.00 16 200 13 500 4 200 5 600 7317 59.0 4.340
180 41 3 1.1 146.00 122.00 14 800 12 400 3 600 4 800 7317B 76.0 4.430
160 30 2.0 1.0 118.00 103.00 12 000 10 500 4 400 5 900 7218 51.0 2.180
160 30 2.0 1.0 107.00 94.00 10 900 9 550 3 800 5 000 7218B 67.5 2.220
90 190 43 3.0 1.1 171.00 147.00 17 400 15 000 4 000 5 300 7318 62.0 5.060
190 43 3.0 1.1 156.00 135.00 15 900 13 800 3 400 4 500 7318B 80.5 5.160
170 32 2.1 1.1 133.00 118.00 13 600 12 000 4 100 5 500 7219 54.5 2.670
170 32 2.1 1.1 121.00 107.00 12 300 11 000 3 500 4 700 7219B 71.5 2.720
95 200 45 3.0 1.1 183.00 162.00 18 600 16 600 3 700 5 000 7319 65.0 5.890
200 45 3.0 1.1 167.00 149.00 17 100 15 200 3 200 4 200 7319B 84.5 6.000
180 34 2.1 1.1 144.00 126.00 14 700 12 800 3 900 5 200 7220 57.5 3.200
180 34 2.1 1.1 130.00 114.00 13 300 11 700 3 400 4 500 7220B 76.0 3.260
100 215 47 3.0 1.1 207.00 193.00 21 100 19 700 3 500 4 700 7320 69.0 7.180
215 47 3.0 1.1 190.00 178.00 19 400 18 100 3 000 4 000 7320B 89.5 7.320
47
10~45mm
d D B rs min Cr Cor Cr Cor d1 t
24 9 0.3 10.0 14.0 1 020 1 420 6 700 9 500 51100 11 2.5 0.021
10
26 11 0.6 12.7 17.1 1 290 1 740 5 800 8 300 51200 12 3.3 0.030
26 9 0.3 10.3 15.4 1 050 1 570 6 400 9 200 51101 13 2.5 0.023
12 28 11 0.6 13.2 19.0 1 340 1 940 5 600 8 000 51201 14 3.3 0.034
28 9 0.3 10.5 16.8 1 070 1 710 6 200 8 800 51102 16 2.5 0.024
15 32 12 0.6 16.6 24.8 1 690 2 530 5 000 7 100 51202 17 3.5 0.046
30 9 0.3 10.8 18.2 1 100 1 850 6 000 8 500 51103 18 2.5 0.026
17 35 12 0.6 17.2 27.3 1 750 2 780 4 800 6 800 51203 19 3.5 0.054
35 10 0.3 14.2 24.7 1 450 2 520 5 200 7 500 51104 21 2.5 0.040
20 40 14 0.6 22.3 37.5 2 270 3 850 4 100 5 900 51204 22 4.1 0.081
42 11 0.6 19.6 37.0 1 990 3 800 4 600 6 500 51105 26 3.0 0.060
25 47 15 0.6 27.8 50.5 2 830 5 150 3 700 5 300 51205 27 4.3 0.111
52 18 1.0 35.5 61.5 3 650 6 250 3 200 4 600 51305 27 5.0 0.176
47 11 0.6 20.4 42.0 2 080 4 300 4 300 6 200 51106 32 3.0 0.069
30 52 16 0.6 29.3 58.0 2 990 5 950 3 400 4 900 51206 32 5.0 0.139
60 21 1.0 43.0 78.5 4 350 8 000 2 800 3 900 51306 32 6.4 0.269
52 12 0.6 20.4 44.5 2 080 4 550 3 900 5 600 51107 37 3.5 0.085
35 62 18 1.0 39.0 78.0 4 000 7 950 2 900 4 200 51207 37 5.2 0.215
68 24 1.0 55.5 105.0 5 650 10 700 2 400 3 500 51307 37 7.2 0.383
60 13 0.6 26.9 63.0 2 740 6 400 3 500 5 000 51108 42 3.8 0.125
40 68 19 1.0 47.0 98.5 4 800 10 000 2 700 3 900 51208 42 5.5 0.276
78 26 1.0 69.0 135.0 7 050 13 700 2 200 3 100 51308 42 7.6 0.548
65 14 0.6 27.9 69.0 2 840 7 050 3 200 4 600 51109 47 4.0 0.148
45 73 20 1.0 48.0 105.0 4 850 10 700 2 600 3 700 51209 47 6.0 0.317
85 28 1.0 80.0 163.0 8 150 16 700 2 000 2 900 51309 47 8.3 0.684
Bearing with Brass cage availiable on request (with suffix M)

48
50~90mm
70 14 0.6 28.8 75.5 2 930 7 700 3 100 4 500 51110 52 4.0 0.161
50 78 22 1.0 48.5 111.0 4 950 11 400 2 400 3 400 51210 52 7.0 0.378
95 31 1.1 96.5 202.0 9 850 20 600 1 800 2 600 51310 52 9.2 0.951
78 16 0.6 35.0 93.0 3 550 9 500 2 800 4 000 51111 57 5.0 0.226
55 90 25 1.0 69.5 159.0 7 100 16 200 2 100 3 000 51211 57 7.5 0.608
105 35 1.1 119.0 246.0 12 200 25 100 1 600 2 300 51311 57 10.2 1.290
85 17 1.0 41.5 113.0 4 200 11 500 2 600 3 700 51112 62 5.0 0.296
60 95 26 1.0 73.5 179.0 7 500 18 200 2 000 2 800 51212 62 8.0 0.676
110 35 1.1 123.0 267.0 12 600 27 200 1 600 2 300 51312 62 10.2 1.370
90 18 1.0 41.5 117.0 4 250 12 000 2 400 3 500 51113 67 5.5 0.338
65 100 27 1.0 75.0 189.0 7 650 19 200 1 900 2 700 51213 67 8.4 0.767
115 36 1.1 128.0 287.0 13 000 29 300 1 500 2 200 51313 67 10.7 1.510
95 18 1.0 43.0 127.0 4 400 12 900 2 400 3 400 51114 72 5.5 0.356
70 105 27 1.0 76.0 199.0 7 750 20 200 1 800 2 600 51214 72 8.4 0.793
125 40 1.1 148.0 340.0 15 100 34 500 1 400 2 000 51314 72 12.0 2.010
100 19 1.0 44.5 136.0 4 550 13 900 2 200 3 200 51115 77 6.0 0.399
75 110 27 1.0 77.5 209.0 7 900 21 300 1 800 2 600 51215 77 8.4 0.874
135 44 1.5 171.0 395.0 17 400 40 500 1 300 1 800 51315 77 13.4 2.610
105 19 1.0 44.5 141.0 4 550 14 400 2 200 3 100 51116 82 6.0 0.422
80 115 28 1.0 78.5 218.0 8 000 22 300 1 700 2 400 51216 82 8.9 0.916
140 44 1.5 176.0 425.0 18 000 43 000 1 200 1 800 51316 82 13.4 2.720
110 19 1.0 46.0 150.0 4 700 15 300 2 100 3 000 51117 87 6.0 0.444
85 125 31 1.0 95.5 264.0 9 700 26 900 1 600 2 200 51217 88 9.8 1.250
150 49 1.5 201.0 490.0 20 500 50 000 1 100 1 600 51317 88 15.0 3.520
120 22 1.0 59.5 190.0 6 100 19 400 1 900 2 700 51118 92 7.0 0.687
90 135 35 1.1 117.0 325.0 11 900 33 000 1 400 2 000 51218 93 11.2 1.700
155 50 1.5 198.0 490.0 20 200 50 000 1 100 1 600 51318 93 15.5 3.740

49
100~150mm
135 25 1.0 85.0 268.0 8 700 27 300 1 700 2 400 51120 102 7.5 0.987
100 150 38 1.1 147.0 410.0 14 900 42 000 1 300 1 800 51220 103 11.7 2.290
170 55 1.5 237.0 595.0 24 100 60 500 990 1 400 51320 103 17.3 4.880
145 25 1.0 87.0 288.0 8 900 29 400 1 600 2 300 51122 112 7.5 1.070
110 160 38 1.1 153.0 450.0 15 600 46 000 1 200 1 800 51222 113 11.7 2.460
190 63 2.0 267.0 705.0 27 300 72 000 870 1 200 51322 113 20.0 7.670
155 25 1.0 89.0 310.0 9 100 31 500 1 500 2 200 51124 122 7.5 1.110
120 170 39 1.1 154.0 470.0 15 700 48 000 1 200 1 700 51224 123 12.2 2.710
210 70 2.1 296.0 805.0 30 000 82 500 780 1 100 51324 123 22.3 10.800
170 30 1.0 104.0 350.0 10 600 36 000 1 300 1 900 51126 132 9.0 1.730
130 190 45 1.5 191.0 565.0 19 400 57 500 1 000 1 500 51226 133 13.9 4.220
225 75 2.1 330.0 960.0 33 500 97 500 720 1 000 51326 134 24.2 12.700
180 31 1.0 107.0 375.0 10 900 38 500 1 300 1 800 51128 142 9.5 1.900
140 200 46 1.5 193.0 595.0 19 700 60 500 980 1 400 51228 143 14.4 4.770
240 80 2.1 350.0 1 050.0 35 500 107 000 670 960 51328 144 26.0 15.300
190 31 1.0 109.0 400.0 11 100 41 000 1 200 1 800 51130 152 10.0 2.000
150 215 50 1.5 220.0 685.0 22 400 70 000 900 1 300 51230 153 15.8 5.870
250 80 2.1 360.0 1 130.0 37 000 115 000 660 940 51330 154 26.0 16.100

50
Cylindrical Roller Bearings
20~50mm
47 14 1.0 0.6 25.7 22.6 2 620 2 310 15 000 18 000 NU204 NJ NUP — 0.122
47 18 1.0 0.6 30.5 28.3 3 100 2 890 14 000 16 000 NU2204 NJ NUP — 0.158
20 52 15 1.1 0.6 31.5 26.9 3 200 2 740 13 000 15 000 NU304 NJ NUP — 0.176
52 21 1.1 0.6 42.0 39.0 4 300 3 950 12 000 14 000 NU2304 NJ NUP — 0.242
52 15 1.0 0.6 29.3 27.7 2 990 2 830 13 000 15 000 NU205 NJ NUP — 0.151
52 18 1.0 0.6 35.0 34.5 3 550 3 550 11 000 13 000 NU2205 NJ NUP — 0.186
25 62 17 1.1 1.1 41.5 37.5 4 250 3 800 11 000 13 000 NU305 NJ NUP — 0.275
62 24 1.1 1.1 57.0 56.0 5 800 5 700 9 700 11 000 NU2305 NJ NUP — 0.386
62 16 1.0 0.6 39.0 37.5 4 000 3 800 11 000 13 000 NU206 NJ NUP — 0.226
62 20 1.0 0.6 49.0 50.0 5 000 5 100 9 700 11 000 NU2206 NJ NUP — 0.297
30 72 19 1.1 1.1 53.0 50.0 5 400 5 100 9 300 11 000 NU306 NJ NUP — 0.398
72 27 1.1 1.1 74.5 77.5 7 600 7 900 8 300 9 700 NU2306 NJ NUP — 0.580
72 17 1.1 0.6 50.5 50.0 5 150 5 100 9 500 11 000 NU207 NJ NUP — 0.327
72 23 1.1 0.6 61.5 65.5 6 300 6 650 8 500 10 000 NU2207 NJ NUP — 0.455
35 80 21 1.5 1.1 71.0 71.0 7 200 7 200 8 100 9 600 NU307 NJ NUP — 0.545
80 31 1.5 1.1 99.0 109.0 10 100 11 100 7 200 8 500 NU2307 NJ NUP — 0.780
80 18 1.1 1.1 43.5 43.0 4 450 4 350 9 400 11 000 NU208 NJ NUP N 0.378
80 23 1.1 1.1 58.0 62.0 5 950 6 300 8 500 10 000 NU2208 NJ NUP N 0.490
40 90 23 1.5 1.5 58.5 57.0 6 000 5 800 8 000 9 400 NU308 NJ NUP N 0.658
90 33 1.5 1.5 82.5 88.0 8 400 8 950 7 000 8 200 NU2308 NJ NUP N 0.951
85 19 1.1 1.1 46.0 47.0 4 700 4 800 8 400 9 900 NU209 NJ NUP N 0.432
85 23 1.1 1.1 61.5 68.0 6 250 6 900 7 600 9 000 NU2209 NJ NUP N 0.530
45 100 25 1.5 1.5 74.0 71.0 7 550 7 250 7 200 8 400 NU309 NJ NUP N 0.877
100 36 1.5 1.5 99.0 104.0 10 100 10 600 6 300 7 400 NU2309 NJ NUP N 1.270
90 20 1.1 1.1 48.0 51.0 4 900 5 200 7 600 9 000 NU210 NJ NUP N 0.470
90 23 1.1 1.1 64.0 73.5 6 550 7 500 6 900 8 100 NU2210 NJ NUP N 0.571
50
110 27 2.0 2.0 87.0 86.0 8 850 8 800 6 500 7 700 NU310 NJ NUP N 1.140
110 40 2.0 2.0 121.0 131.0 12 300 13 400 5 700 6 700 NU2310 NJ NUP N 1.700
51
55~85mm
100 21 1.5 1.1 58.0 62.5 5 900 6 350 6 900 8 200 NU211 NJ NUP N 0.638
100 25 1.5 1.1 75.5 87.0 7 700 8 900 6 300 7 400 NU2211 NJ NUP N 0.773
55 120 29 2.0 2.0 111.0 111.0 11 300 11 400 5 900 7 000 NU311 NJ NUP N 1.450
120 43 2.0 2.0 148.0 162.0 15 100 16 500 5 200 6 100 NU2311 NJ NUP N 2.170
110 22 1.5 1.5 68.5 75.0 7 000 7 650 6 400 7 600 NU212 NJ NUP N 0.818
110 28 1.5 1.5 96.0 116.0 9 800 11 800 5 800 6 800 NU2212 NJ NUP N 1.060
60 130 31 2.1 2.1 124.0 126.0 12 600 12 900 5 500 6 500 NU312 NJ NUP N 1.800
130 46 2.1 2.1 169.0 188.0 17 200 19 200 4 800 5 700 NU2312 NJ NUP N 2.710
120 23 1.5 1.5 84.0 94.5 8 550 9 650 5 900 7 000 NU213 NJ NUP N 1.020
120 31 1.5 1.5 120.0 149.0 12 200 15 200 5 400 6 300 NU2213 NJ NUP N 1.400
65 140 33 2.1 2.1 135.0 139.0 13 800 14 200 5 100 6 000 NU313 NJ NUP N 2.230
140 48 2.1 2.1 188.0 212.0 19 100 21 700 4 400 5 200 NU2313 NJ NUP N 3.270
125 24 1.5 1.5 83.5 95.0 8 500 9 700 5 500 6 500 NU214 NJ NUP N 1.120
125 31 1.5 1.5 119.0 151.0 12 200 15 400 5 000 5 900 NU2214 NJ NUP N 1.470
70 150 35 2.1 2.1 158.0 168.0 16 100 17 200 4 700 5 500 NU314 NJ NUP N 2.710
150 51 2.1 2.1 223.0 262.0 22 700 26 700 4 100 4 800 NU2314 NJ NUP N 3.980
130 25 1.5 1.5 96.5 111.0 9 850 11 300 5 100 6 000 NU215 NJ NUP N 1.230
130 31 1.5 1.5 130.0 162.0 13 200 16 500 4 700 5 500 NU2215 NJ NUP N 1.550
75 160 37 2.1 2.1 190.0 205.0 19 400 20 900 4 400 5 200 NU315 NJ NUP N 3.280
160 55 2.1 2.1 258.0 300.0 26 300 31 000 3 800 4 500 NU2315 NJ NUP N 4.870
140 26 2.0 2.0 106.0 122.0 10 800 12 500 4 800 5 700 NU216 NJ NUP N 1.500
140 33 2.0 2.0 147.0 186.0 15 000 19 000 4 400 5 100 NU2216 NJ NUP N 1.930
80 170 39 2.1 2.1 190.0 207.0 19 400 21 100 4 100 4 800 NU316 NJ NUP N 3.860
170 58 2.1 2.1 274.0 330.0 27 900 34 000 3 600 4 200 NU2316 NJ NUP N 5.790
150 28 2.0 2.0 120.0 140.0 12 300 14 300 4 500 5 300 NU217 NJ NUP N 1.870
150 36 2.0 2.0 170.0 218.0 17 300 22 200 4 100 4 800 NU2217 NJ NUP N 2.440
85
180 41 3.0 3.0 212.0 228.0 21 600 23 300 3 900 4 600 NU317 NJ NUP N 4.540
180 60 3.0 3.0 315.0 380.0 32 000 39 000 3 400 4 000 NU2317 NJ NUP N 6.700
52
90~100mm
160 30 2.0 2.0 152.0 178.0 15 500 18 100 4 300 5 000 NU218 NJ NUP N 2.300
160 40 2.0 2.0 197.0 248.0 20 100 25 300 3 900 4 600 NU2218 NJ NUP N 3.100
90 190 43 3.0 3.0 240.0 265.0 24 500 27 100 3 700 4 300 NU318 NJ NUP N 5.300
190 64 3.0 3.0 325.0 395.0 33 500 40 000 3 200 3 800 NU2318 NJ NUP N 7.950
170 32 2.1 2.1 166.0 195.0 16 900 19 900 4 000 4 700 NU219 NJ NUP N 2.780
170 43 2.1 2.1 230.0 298.0 23 500 30 500 3 600 4 300 NU2219 NJ NUP N 3.790
95 200 45 3.0 3.0 259.0 285.0 26 400 29 500 3 400 4 000 NU319 NJ NUP N 6.130
200 67 3.0 3.0 370.0 460.0 38 000 47 000 3 000 3 500 NU2319 NJ NUP N 9.200
180 34 2.1 2.1 183.0 217.0 18 600 22 200 3 800 4 500 NU220 NJ NUP N 3.330
180 46 2.1 2.1 258.0 340.0 26 300 34 500 3 500 4 100 NU2220 NJ NUP N 4.570
100 215 47 3.0 3.0 299.0 335.0 30 500 34 500 3 300 3 800 NU320 NJ NUP N 7.490
215 73 3.0 3.0 410.0 505.0 42 000 51 500 2 900 3 400 NU2320 NJ NUP N 11.700
53
Metric Series
15~32mm
d D T B C rs min r1s min Cr Cor Cr Cor
15 42 14.25 13 11 1.0 1.0 23.2 20.8 2 370 2 120 9 900 13 000 30302JR 0.098
40 13.25 12 11 1.0 1.0 20.5 20.3 2 090 2 070 9 900 13 000 30203JR 0.080
17 40 17.25 16 14 1.0 1.0 27.3 28.3 2 790 2 880 9 900 13 000 32203JR 0.102
47 15.25 14 12 1.0 1.0 28.9 26.3 2 940 2 680 9 000 12 000 30303JR 0.134
42 15.00 15 12 0.6 0.6 24.9 27.9 2 540 2 840 9 500 13 000 32004JR 0.097
47 15.25 14 12 1.0 1.0 28.2 28.7 2 870 2 930 8 800 12 000 30204JR 0.127
20 47 19.25 18 15 1.0 1.0 36.5 39.5 3 700 4 000 8 800 12 000 32204JR 0.160
52 16.25 16 13 1.5 1.5 35.5 34.0 3 600 3 450 8 000 11 000 30304JR 0.176
52 22.25 21 18 1.5 1.5 46.5 48.5 4 750 4 950 8 000 11 000 32304JR 0.245
22 44 15.00 15 11.5 0.6 0.6 27.0 31.5 2 760 3 250 8 900 12 000 320/22JR 0.106
47 15.00 15 11.5 0.6 0.6 27.8 33.5 2 830 3 450 7 900 11 000 32005JR 0.114
47 17.00 17 14 0.6 0.6 32.5 40.5 3 300 4 150 8 000 11 000 33005JR 0.130
52 16.25 15 13 1.0 1.0 31.5 34.0 3 200 3 450 7 300 9 800 30205JR 0.154
52 19.25 18 16 1.0 1.0 42.0 47.0 4 300 4 800 7 300 9 800 32205JR 0.187
25 52 22.00 22 18 1.0 1.0 47.5 57.5 4 850 5 850 7 300 9 800 33205JR 0.217
62 18.25 17 15 1.5 1.5 48.5 47.5 4 950 4 850 6 700 8 900 30305JR 0.272
62 18.25 17 13 1.5 1.5 40.5 43.5 4 150 4 450 5 900 7 800 30305DJR 0.284
62 25.25 24 20 1.5 1.5 61.5 64.5 6 250 6 600 6 700 8 900 32305JR 0.381
28 52 16.00 16 12 1.0 1.0 33.0 40.5 3 400 4 150 7 300 9 700 320/28JR 0.146
55 17.00 17 13 1.0 1.0 37.5 46.0 3 800 4 700 6 900 9 200 32006JR 0.166
55 20.00 20 16 1.0 1.0 42.5 54.0 4 300 5 500 6 900 9 200 33006JR 0.201
62 17.25 16 14 1.0 1.0 43.5 48.0 4 450 4 900 6 300 8 400 30206JR 0.241
62 21.25 20 17 1.0 1.0 54.5 64.0 5 600 6 550 6 300 8 400 32206JR 0.301
30 62 25.00 25 19.5 1.0 1.0 65.0 77.0 6 600 7 850 6 300 8 400 33206JR 0.344
72 20.75 19 16 1.5 1.5 60.0 61.0 6 100 6 200 5 700 7 600 30306JR 0.408
72 20.75 19 14 1.5 1.5 48.5 51.5 4 950 5 250 5 000 6 700 30306DJR 0.398
72 28.75 27 23 1.5 1.5 81.0 90.0 8 250 9 150 5 700 7 600 32306JR 0.583
32 58 17.00 17 13 1.0 1.0 37.0 46.5 3 750 4 750 6 600 8 700 320/32JR 0.181
54
Metric Series
35~50mm
62 18.00 18 14 1.0 1.0 41.5 52.5 4 250 5 350 6 100 8 100 32007JR 0.224
62 21.00 21 17 1.0 1.0 50.5 66.5 5 150 6 800 6 100 8 100 33007JR 0.263
72 18.25 17 15 1.5 1.5 55.5 61.5 5 650 6 250 5 500 7 400 30207JR 0.344
72 24.25 23 19 1.5 1.5 72.5 87.0 7 400 8 900 5 500 7 400 32207JR 0.457
35 72 28.00 28 22 1.5 1.5 87.5 109 8 900 11 200 5 500 7 400 33207JR 0.531
80 22.75 21 18 2.0 1.5 75.0 77.0 7 650 7 900 5 000 6 600 30307JR 0.540
80 22.75 21 15 2.0 1.5 63.5 70.0 6 450 7 100 4 400 5 800 30307DJR 0.530
80 32.75 31 25 2.0 1.5 101 115 10 300 11 700 5 000 6 600 32307JR 0.787
68 19.00 19 14.5 1.0 1.0 50.0 65.5 5 100 6 650 5 300 7 100 32008JR 0.273
68 22.00 22 18 1.0 1.0 59.5 82.5 6 050 8 400 5 300 7 100 33008JR 0.312
75 26.00 26 20.5 1.5 1.5 79.5 103 8 100 10 500 5 200 6 900 33108JR 0.494
80 19.75 18 16 1.5 1.5 61.0 67.0 6 250 6 850 4 900 6 600 30208JR 0.435
40 80 24.75 23 19 1.5 1.5 79.5 93.5 8 100 9 550 4 900 6 600 32208JR 0.558
80 32.00 32 25 1.5 1.5 103 132 10 500 13 400 4 900 6 600 33208JR 0.728
90 25.25 23 20 2.0 1.5 91.5 102 9 350 10 400 4 400 5 900 30308JR 0.769
90 25.25 23 17 2.0 1.5 77.0 85.5 7 850 8 700 3 900 5 200 30308DJR 0.738
90 35.25 33 27 2.0 1.5 110 140 11 300 14 300 4 200 5 600 32308JR 1.100
75 20.00 20 15.5 1.0 1.0 57.5 76.5 5 850 7 800 4 800 6 400 32009JR 0.346
75 24.00 24 19 1.0 1.0 66.0 93.5 6 750 9 550 4 800 6 400 33009JR 0.398
80 26.00 26 20.5 1.5 1.5 84.5 115 8 650 11 700 4 700 6 200 33109JR 0.542
85 20.75 19 16 1.5 1.5 67.5 78.5 6 900 8 000 4 400 5 900 30209JR 0.495
45
85 24.75 23 19 1.5 1.5 82.0 100 8 350 10 200 4 400 5 900 32209JR 0.607
85 32.00 32 25 1.5 1.5 107 141 10 900 14 400 4 400 5 900 33209JR 0.783
100 27.25 25 22 2.0 1.5 111 126 11 300 12 800 4 000 5 300 30309JR 1.010
100 27.25 25 18 2.0 1.5 96.0 109 9 800 11 100 3 500 4 600 30309DJR 0.958
100 38.25 36 30 2.0 1.5 154 191 15 700 19 500 4 000 5 300 32309JR 1.460
80 20.00 20 15.5 1.0 1.0 62.5 88.0 6 400 9 000 4 400 5 800 32010JR 0.366
80 24.00 24 19 1.0 1.0 69.5 103 7 100 10 500 4 400 5 800 33010JR 0.433
85 26.00 26 20 1.5 1.5 86.5 121 8 850 12 400 4 200 5 600 33110JR 0.580
90 21.75 20 17 1.5 1.5 77.0 93.0 7 850 9 450 4 000 5 300 30210JR 0.563
50 90 24.75 23 19 1.5 1.5 87.5 109 8 900 11 100 4 000 5 300 32210JR 0.648
90 32.00 32 24.5 1.5 1.5 115 158 11 700 16 100 4 000 5 300 33210JR 0.852
110 29.25 27 23 2.5 2.0 133 152 13 500 15 500 3 600 4 800 30310JR 1.310
110 29.25 27 19 2.5 2.0 113 130 11 600 13 300 3 200 4 200 30310DJR 1.250
110 42.25 40 33 2.5 2.0 184 232 18 700 23 600 3 600 4 800 32310JR 1.920
55
Metric Series
55~70mm
90 23.00 23 17.5 1.5 1.5 80.5 118 8 200 12 000 4 000 5 400 32011JR 0.563
90 27.00 27 21 1.5 1.5 91.5 138 9 350 14 100 4 000 5 400 33011JR 0.643
95 30.00 30 23 1.5 1.5 111 155 11 300 15 800 3 900 5 200 33111JR 0.846
100 22.75 21 18 2.0 1.5 93.0 111 9 500 11 300 3 600 4 900 30211JR 0.740
55 100 26.75 25 21 2.0 1.5 108 134 11 000 13 700 3 600 4 900 32211JR 0.876
100 35.00 35 27 2.0 1.5 138 188 14 100 19 100 3 600 4 900 33211JR 1.150
120 31.50 29 25 2.5 2.0 155 179 15 800 18 300 3 300 4 400 30311JR 1.660
120 31.50 29 21 2.5 2.0 132 154 13 500 15 700 2 900 3 800 30311DJR 1.590
120 45.50 43 35 2.5 2.0 215 275 21 900 28 000 3 300 4 400 32311JR 2.440
95 23.00 23 17.5 1.5 1.5 82.0 123 8 350 12 500 3 700 4 900 32012JR 0.576
95 27.00 27 21 1.5 1.5 93.5 145 9 550 14 700 3 700 4 900 33012JR 0.684
100 30.00 30 23 1.5 1.5 113 164 11 600 16 700 3 600 4 700 33112JR 0.912
110 23.75 22 19 2.0 1.5 105 125 10 700 12 700 3 400 4 500 30212JR 0.949
60 110 29.75 28 24 2.0 1.5 130 164 13 200 16 800 3 400 4 500 32212JR 1.180
110 38.00 38 29 2.0 1.5 161 223 16 400 22 700 3 400 4 500 33212JR 1.550
130 33.50 31 26 3.0 2.5 180 210 18 300 21 400 3 000 4 000 30312JR 2.060
130 33.50 31 22 3.0 2.5 150 176 15 300 17 900 2 700 3 600 30312DJR 1.970
130 48.50 46 37 3.0 2.5 244 315 24 900 32 000 3 000 4 000 32312JR 3.020
100 23.00 23 17.5 1.5 1.5 83.0 128 8 450 13 000 3 400 4 600 32013JR 0.630
100 27.00 27 21 1.5 1.5 97.5 156 9 950 16 000 3 400 4 600 33013JR 0.732
110 34.00 34 26.5 1.5 1.5 144 211 14 700 21 500 3 300 4 400 33113JR 1.280
120 24.75 23 20 2.0 1.5 123 148 12 500 15 000 3 100 4 200 30213JR 1.180
65 120 32.75 31 27 2.0 1.5 159 206 16 200 21 000 3 100 4 200 32213JR 1.580
120 41.00 41 32 2.0 1.5 195 265 19 900 27 100 3 100 4 200 33213JR 1.980
140 36.00 33 28 3.0 2.5 203 238 20 700 24 300 2 800 3 700 30313JR 2.550
140 36.00 33 23 3.0 2.5 173 204 17 700 20 900 2 500 3 300 30313DJR 2.420
140 51.00 48 39 3.0 2.5 273 350 27 800 36 000 2 800 3 700 32313JR 3.660
110 25.00 25 19 1.5 1.5 105 160 10 700 16 400 3 200 4 200 32014JR 0.630
110 31.00 31 25.5 1.5 1.5 127 204 12 900 20 800 3 200 4 200 33014JR 0.732
125 26.25 24 21 2.0 1.5 131 162 13 400 16 500 2 900 3 900 30214JR 1.280
125 33.25 31 27 2.0 1.5 166 220 16 900 22 400 2 900 3 900 32214JR 1.180
70
125 41.00 41 32 2.0 1.5 201 282 20 500 28 700 2 900 3 900 33214JR 1.580
150 38.00 35 30 3.0 2.5 230 272 23 400 27 800 2 600 3 500 30314JR 2.550
150 38.00 35 25 3.0 2.5 193 229 19 600 23 300 2 300 3 000 30314DJR 2.420
150 54.00 51 42 3.0 2.5 310 405 31 500 41 000 2 600 3 500 32314JR 3.660
56
Metric Series
75~90mm
115 25.00 25 19 1.5 1.5 106 167 10 800 17 000 3 000 4 000 32015JR 0.909
115 31.00 31 25.5 1.5 1.5 111 186 11 300 19 000 3 000 4 000 33015JR 1.110
130 27.25 25 22 2.0 1.5 139 175 14 200 17 900 2 700 3 600 30215JR 1.410
130 33.25 31 27 2.0 1.5 168 224 17 100 22 800 2 700 3 600 32215JR 1.740
75 130 41.00 41 31 2.0 1.5 208 298 21 200 30 500 2 700 3 600 33215JR 2.200
160 40.00 37 31 3.0 2.5 255 305 26 000 31 000 2 400 3 200 30315JR 3.570
160 40.00 37 26 3.0 2.5 215 256 21 900 26 100 2 100 2 800 30315DJR 3.470
160 58.00 55 45 3.0 2.5 355 470 36 000 47 500 2 400 3 200 32315JR 5.350
125 29.00 29 22 1.5 1.5 139 216 14 200 22 000 2 800 3 700 32016JR 1.280
125 36.00 36 29.5 1.5 1.5 173 284 17 600 29 000 2 800 3 700 33016JR 1.600
140 28.25 26 22 2.5 2.0 160 200 16 300 20 400 2 500 3 400 30216JR 1.720
140 35.25 33 28 2.5 2.0 199 265 20 300 27 000 2 500 3 400 32216JR 2.180
80
140 46.00 46 35 2.5 2.0 250 365 25 500 37 500 2 500 3 400 33216JR 2.920
170 42.50 39 33 3.0 2.5 291 350 29 700 36 000 2 300 3 000 30316JR 4.410
170 42.50 39 27 3.0 2.5 236 283 24 100 28 900 2 000 2 700 30316DJR 4.110
170 61.50 58 48 3.0 2.5 395 525 40 500 53 500 2 300 3 000 32316JR 6.410
130 29.00 29 22 1.5 1.5 142 224 14 400 22 900 2 600 3 500 32017JR 1.350
130 36.00 36 29.5 1.5 1.5 176 296 18 000 30 000 2 600 3 500 33017JR 1.700
150 30.50 28 24 2.5 2.0 183 232 18 600 23 600 2 400 3 200 30217JR 2.140
150 38.50 36 30 2.5 2.0 224 300 22 900 30 500 2 400 3 200 32217JR 2.750
85
150 49.00 49 37 2.5 2.0 284 420 29 000 43 000 2 400 3 200 33217JR 3.580
180 44.50 41 34 4.0 3.0 305 365 31 000 37 000 2 100 2 900 30317JR 5.200
180 44.50 41 28 4.0 3.0 247 293 25 200 29 900 1 900 2 500 30317DJR 4.850
180 63.50 60 49 4.0 3.0 405 525 41 000 53 500 2 100 2 900 32317JR 7.150
140 32.00 32 24 2.0 1.5 168 270 17 200 27 600 2 500 3 300 32018JR 1.790
140 39.00 39 32.5 2.0 1.5 215 360 21 900 36 500 2 500 3 300 33018JR 2.180
160 32.50 30 26 2.5 2.0 208 267 21 200 27 200 2 200 3 000 30218JR 2.660
90 160 42.50 40 34 2.5 2.0 262 360 26 700 36 500 2 200 3 000 32218JR 3.490
190 46.50 43 36 4.0 3.0 335 405 34 500 41 500 2 000 2 700 30318JR 6.030
190 46.50 43 30 4.0 3.0 270 320 27 600 33 000 1 800 2 400 30318DJR 5.660
190 67.50 64 53 4.0 3.0 450 595 46 000 60 500 2 000 2 700 32318JR 8.570
57
Metric Series
95~120mm
145 32.00 32 24 2.0 1.5 171 280 17 500 28 600 2 300 3 100 32019JR 1.830
145 39.00 39 32.5 2.0 1.5 219 375 22 400 38 000 2 300 3 100 33019JR 2.270
170 34.50 32 27 3.0 2.5 226 290 23 000 29 600 2 100 2 800 30219JR 3.070
95 170 45.50 43 37 3.0 2.5 299 415 30 500 42 500 2 100 2 800 32219JR 4.300
200 49.50 45 38 4.0 3.0 365 445 37 500 45 500 1 900 2 500 30319JR 6.980
200 49.50 45 32 4.0 3.0 296 355 30 000 36 500 1 700 2 200 30319DJR 6.470
200 71.50 67 55 4.0 3.0 505 670 51 500 68 500 1 900 2 500 32319JR 10.100
150 32.00 32 24 2.0 1.5 170 281 17 300 28 600 2 200 3 000 32020JR 1.910
150 39.00 39 32.5 2.0 1.5 224 390 22 800 39 500 2 200 3 000 33020JR 2.370
180 37.00 34 29 3.0 2.5 258 335 26 300 34 500 2 000 2 700 30220JR 3.780
100 180 49.00 46 39 3.0 2.5 330 465 33 500 47 500 2 000 2 700 32220JR 5.120
215 51.50 47 39 4.0 3.0 410 500 41 500 51 000 1 800 2 400 30320JR 8.560
215 56.50 51 35 4.0 3.0 355 435 36 000 44 000 1 800 2 400 31320JR 8.670
215 77.50 73 60 4.0 3.0 570 770 58 500 78 500 1 800 2 400 32320JR 12.700
160 35.00 35 26 2.5 2.0 201 335 20 500 34 000 2 100 2 800 32021JR 2.420
160 43.00 43 34 2.5 2.0 245 420 25 000 43 000 2 100 2 800 33021JR 3.000
190 39.00 36 30 3.0 2.5 287 380 29 300 38 500 1 900 2 500 30221JR 4.390
105 190 53.00 50 43 3.0 2.5 380 540 38 500 55 500 1 900 2 500 32221JR 6.250
225 53.50 49 41 4.0 3.0 435 530 44 500 54 500 1 700 2 300 30321JR 9.790
225 58.00 53 36 4.0 3.0 380 470 39 000 47 500 1 700 2 300 31321JR 9.680
225 81.50 77 63 4.0 3.0 610 825 62 500 84 500 1 700 2 300 32321JR 14.500
170 38.00 38 29 2.5 2.0 236 390 24 000 39 500 2 000 2 700 32022JR 3.070
170 47.00 47 37 2.5 2.0 288 500 29 400 51 000 2 000 2 700 33022JR 3.800
200 41.00 38 32 3.0 2.5 325 435 33 000 44 000 1 800 2 400 30222JR 5.180
110 200 56.00 53 46 3.0 2.5 420 605 43 000 62 000 1 800 2 400 32222JR 7.430
240 54.50 50 42 4.0 3.0 480 590 49 000 60 000 1 600 2 200 30322JR 11.400
240 63.00 57 38 4.0 3.0 430 535 44 000 54 500 1 600 2 200 31322JR 11.900
240 84.50 80 65 4.0 3.0 705 970 72 000 98 500 1 600 2 200 32322JR 18.000
180 38.00 38 29 2.5 2.0 245 420 25 000 43 000 1 800 2 500 32024JR 3.250
215 43.50 40 34 3.0 2.5 345 470 35 500 48 000 1 700 2 200 30224JR 6.230
215 61.50 58 50 3.0 2.5 460 680 47 000 69 500 1 700 2 200 32224JR 9.080
120
260 59.50 55 46 4.0 3.0 560 695 57 000 71 000 1 500 2 000 30324JR 14.200
260 68.00 62 42 4.0 3.0 515 655 52 500 67 000 1 500 2 000 31324JR 15.400
260 90.50 86 69 4.0 3.0 815 1 130 83 000 116 000 1 500 2 000 32324JR 22.400
58
Metric Series
130~150mm
200 45.00 45 34 2.5 2.0 320 545 32 500 55 500 1 700 2 200 32026JR 4.960
230 43.75 40 34 4.0 3.0 375 505 38 000 51 500 1 500 2 000 30226JR 7.250
130 230 67.75 64 54 4.0 3.0 530 815 54 000 83 000 1 500 2 000 32226JR 11.200
280 63.75 58 49 5.0 4.0 650 830 66 000 84 500 1 400 1 800 30326JR 17.400
280 72.00 66 44 5.0 4.0 600 780 61 500 79 500 1 400 1 800 31326JR 19.000
210 45.00 45 34 2.5 2.0 330 580 33 500 59 500 1 600 2 100 32028JR 5.280
250 45.75 42 36 4.0 3.0 420 570 43 000 58 500 1 400 1 900 30228JR 9.260
140 250 71.75 68 58 4.0 3.0 610 920 62 500 94 000 1 400 1 900 32228JR 8.370
300 67.75 62 53 5.0 4.0 735 950 75 000 97 000 1 300 1 700 30328JR 21.200
300 77.00 70 47 5.0 4.0 685 905 70 000 92 500 1 300 1 700 31328JR 23.000
225 48.00 48 36 3.0 2.5 370 655 37 500 67 000 1 400 1 900 32030JR 6.370
270 49.00 45 38 4.0 3.0 450 605 46 000 61 500 1 300 1 700 30230JR 11.200
150 270 77.00 73 60 4.0 3.0 700 1070 71 500 109 000 1 300 1 700 32230JR 18.200
320 72.00 65 55 5.0 4.0 825 1070 84 000 109 000 1 200 1 600 30330JR 25.500
320 82.00 75 50 5.0 4.0 775 1030 79 000 105 000 1 200 1 600 31330JR 27.700
59
Taper Roller Bearings
Inch Series
15.875~34.925mm
d D T B C rs min r1s min Cr Cor
15.875 42.862 14.288 14.287 9.525 0.8 0.8 17.600 18.000 8700 12000 11590/20 0.103
17.462 39.878 13.843 14.605 10.668 1.2 1.2 25.400 26.000 11000 14000 LM11749/10 0.085
19.050
45.237 15.494 16.637 12.065 1.2 1.2 29.400 30.100 9400 13000 LM11949/10 0.124
49.225 18.034 19.050 14.228 0.6 0.6 38.500 39.000 8500 11000 09067/195 0.179
21.430
45.237 15.494 16.637 12.065 1.3 1.3 27.500 31.000 8000 11000 LM12748/10 0.123
50.005 17.526 18.288 13.970 1.2 1.2 39.100 40.700 8500 11000 M12649/10 0.177
21.986
45.974 15.494 16.637 12.065 1.2 1.2 30.100 34.600 8900 12000 LM12749/11 0.121
45.237 15.494 16.637 12.065 1.3 1.3 27.500 31.000 8000 11000 LM12749/10 0.115
22.225 57.150 22.225 22.225 17.462 0.8 1.6 52.600 55.700 7600 10000 1280/20 0.293
25.400 57.150 19.431 19.431 14.732 1.5 1.5 38.000 49.000 7500 10000 M84548/10 0.237
25.987 57.150 17.462 17.462 13.495 3.5 1.5 37.800 42.700 7450 8430 HC15579X/20 0.210
26.988 50.292 14.224 14.732 10.668 3.6 1.2 31.200 37.000 7800 10000 L44649/10 0.122
28.575
57.150 19.845 19.355 15.875 3.6 1.6 48.800 57.100 7000 9300 1988/22 0.227
68.262 22.225 22.225 17.462 0.8 1.6 51.000 61.100 6000 8000 02474/20 0.408
29.000 50.292 14.224 14.732 10.668 3.6 1.2 28.900 37.200 7600 10000 L45449/10 0.115
30.162 64.292 21.432 21.433 16.670 1.6 1.6 55.200 70.700 6400 8500 M86649/10 0.340
31.750
59.131 15.875 16.764 11.811 1.2 1.2 35.800 43.100 6600 8800 LM67048/10 0.182
62.000 19.050 19.050 14.288 1.2 1.2 44.600 50.700 6400 8600 15123/245 0.238
33.338 68.262 22.225 22.225 17.462 1.5 0.8 50.900 70.400 6300 7500 M88048/10 0.382
65.088 18.034 18.288 13.970 1.3 1.2 48.000 58.500 6000 8000 LM48548/10 0.249
34.925 69.012 19.845 19.583 15.875 1.3 1.2 53.900 67.000 5600 7500 14138A/14276 0.330
72.233 25.400 25.400 19.842 2.4 2.4 66.900 87.400 5700 7600 HM88649/10 0.487
60
Inch Series
34.925~45.242mm
34.925
73.025 23.813 24.608 19.050 1.6 0.8 72.200 87.300 5600 7400 25877/21 0.474
76.200 29.369 28.575 23.020 1.6 1.0 78.100 106.000 4800 6300 HM89446/10 0.660
34.988
59.131 15.875 16.764 11.938 3.6 1.2 35.700 48.500 6400 8500 L68149/10 0.168
59.974 15.875 16.764 11.938 3.6 1.2 35.700 48.500 6400 8500 L68149/11 0.175
38.000 63.000 17.000 17.000 13.500 1.8 1.3 38.500 52.500 5700 7600 JL69349/10 0.198
65.088 18.034 18.288 13.970 1.9 1.2 42.900 56.500 5800 7800 LM29748/10 0.233
65.088 18.034 18.288 13.970 2.3 1.3 40.000 57.000 5000 7000 LM29749/10 0.237
38.100 65.088 19.812 18.288 15.748 2.4 1.2 42.900 56.500 5800 7800 LM29749/11 0.251
76.200 23.775 25.654 19.050 2.0 1.5 730.000 905.000 5100 6800 2788/20 0.499
88.500 26.988 29.083 22.225 3.5 1.5 95.500 107.000 4600 6100 418/414 0.840
40.988
67.975 17.500 18.000 13.500 2.6 1.5 46.000 62.500 5300 7000 57414/LM300811 0.239
67.975 17.500 18.000 13.500 2.6 1.5 46.000 62.500 5300 7000 LM300849/LM300811 0.239
73.025 16.667 17.462 12.700 3.6 1.6 45.900 55.800 5200 6900 18590/20 0.283
73.431 19.558 19.812 14.732 3.6 0.8 57.800 73.000 5200 7000 LM501349/10 0.334
41.275 76.200 18.009 17.384 14.288 1.6 1.6 51.600 63.300 5200 6900 11162R/300 0.348
87.312 30.163 30.886 23.812 1.5 1.5 102.000 1.320 4500 6000 3577/3525 0.850
88.900 30.162 29.370 23.020 3.6 3.2 99.600 125.000 4600 6100 HM803146/10 0.892
42.862 87.312 30.163 30.886 23.812 3.6 3.0 94.000 117.000 4500 5900 3579/3525 0.805
82.931 23.813 25.400 19.050 3.6 1.6 760.000 980.000 4500 6000 25580/20 0.560
83.058 23.813 25.400 19.050 3.5 3.3 760.000 980.000 4500 6000 25580/21 0.540
93.264 30.163 30.302 23.812 3.5 3.3 102.000 134.000 4000 5300 3782/20 0.961
44.450 88.900 30.162 29.370 23.020 3.6 3.2 99.600 125.000 4600 6100 HM803149/10 0.843
92.075 30.162 29.370 23.020 3.8 3.3 95.200 127.000 4500 6000 HM803149/12 0.850
95.250 30.958 28.575 22.225 3.6 0.8 99.700 12.000 3700 5100 HM903249/10 0.989
111.125 38.100 36.957 33.338 3.6 3.2 138.000 172.000 3800 5100 535/532 1.830
45.230 79.985 30.559 20.638 15.080 2.0 1.3 55.100 70.800 4800 6300 17887/31 0.402
45.242
73.431 19.558 19.812 15.748 3.6 0.8 55.600 78.100 5100 6700 LM102949/10 0.307
77.788 19.842 19.842 15.080 3.6 0.8 57.100 73.500 4900 6500 LM603049/11 0.363
61
Inch Series
45.987~65.088mm
45.987 74.976 18.000 18.000 14.000 2.8 1.0 50.100 71.000 4800 6300 LM503349/10 0.310
45.618 82.931 23.813 25.400 19.050 3.5 0.8 53.900 69.500 4500 6000 25590/20 0.554
46.038 85.000 20.638 21.692 17.462 2.4 1.2 71.800 81.700 4600 6200 359S/354A 0.483
47.625
90.000 20.000 22.225 15.875 3.6 1.2 74.300 87.300 4400 5800 369S/362 0.537
95.250 30.163 29.370 23.020 3.6 3.2 104.000 140.000 3300 4400 HM804846/10 0.968
50.000
82.000 21.500 21.500 17.000 3.0 0.5 71.700 97.900 4500 6000 JLM104948/10 0.431
93.264 30.162 30.302 23.812 2.4 0.8 110.000 146.000 4000 4300 50KW01/3720L 0.870
82.550 21.160 22.225 16.510 3.6 1.2 61.200 84.300 4500 6000 JLM104949/11 0.131
50.800
88.900 20.637 22.225 16.513 3.6 1.2 74.300 87.300 4400 5800 368A/362A 0.494
92.075 24.607 25.400 19.845 3.6 0.8 84.800 119.000 4200 5600 28580R/21 0.700
93.264 30.163 30.302 23.812 3.6 3.2 103.000 137.000 4200 5500 3780/20 0.835
52.388 92.075 24.607 25.400 19.845 3.6 0.8 84.800 119.000 4200 5600 28584R/21 0.682
95.250 27.783 28.575 22.225 2.4 1.0 105.000 137.000 4000 5300 33895/33822 0.820
53.975 111.125 38.100 36.957 33.338 3.6 3.2 138.000 172.000 3800 5100 539/532 1.460
123.825 36.512 32.791 25.400 2.8 1.2 154.000 188.000 2900 3900 72212/72487 2.030
96.838 21.000 21.946 15.875 3.6 0.8 80.400 101.000 3900 5200 387A/382A 0.603
98.425 21.000 21.946 17.826 2.4 0.8 80.400 101.000 3900 5200 387/382 0.652
57.150 104.775 30.162 29.317 24.605 2.4 3.2 109.000 144.000 3700 4900 462/453X 1.060
104.775 30.162 29.317 24.605 3.6 3.2 109.000 144.000 3700 4900 469/453X 1.050
112.712 30.163 30.162 23.812 3.2 2.4 142.000 204.000 3200 4300 39581/39520 1.400
110.000 22.000 21.996 18.824 3.2 2.2 88.000 118.000 3200 4300 395/394A 0.840
63.500 112.712 30.163 30.048 23.812 3.5 3.3 119.000 174.000 3200 4300 3982/20 1.260
122.238 38.100 38.354 29.718 7.0 3.3 159.000 146.000 3400 4300 HM212047/11 1.930
130.048 36.512 36.170 28.575 3.5 0.8 146.000 216.000 3000 4000 565/562 0.620
65.088 135.755 53.975 56.007 44.450 3.6 3.2 266.000 357.000 3000 4000 6379/6320 3.710
62
Inch Series
66.675~107.950mm
112.712 30.163 30.048 23.812 3.6 3.3 119.000 174.000 3200 4300 3984/20 1.180
66.675 122.238 38.100 38.354 29.718 3.6 1.6 191.000 249.000 3200 4300 HM212049/10 1.860
122.348 38.100 38.354 29.718 3.5 3.3 159.000 146.000 3400 4200 HM212049/11 1.850
117.475 30.162 30.162 23.812 3.6 3.2 118.000 179.000 3200 4200 33275/462 1.270
69.850
120.000 32.545 32.545 26.195 3.6 3.2 150.000 218.000 3100 4200 47487/20 1.480
120.000 29.794 29.007 24.237 3.6 2.0 118.000 161.000 3200 4200 482/472 1.280
127.000 36.512 36.170 28.575 3.6 3.2 156.000 226.000 3000 4000 566/563 1.890
70.000 130.000 57.000 56.000 35.000 3.2 2.8 209.000 300.000 2400 3400 534565/528983 2.775
73.025 112.712 25.400 25.400 19.050 3.6 3.2 97.000 155.000 3200 4300 29685/20 0.872
76.200
133.350 33.337 33.338 26.195 3.6 3.3 153.000 235.000 2600 3500 47679/20 1.920
139.992 36.513 36.098 28.575 3.6 3.2 175.000 262.000 2700 3600 575/572 2.410
82.550
125.412 25.400 25.400 19.845 3.6 1.6 101.000 162.000 2900 3800 27687/20 1.050
139.992 36.513 36.098 28.575 3.6 3.2 175.000 262.000 2700 3600 580/572 2.190
85.026 150.089 44.450 46.672 36.512 3.6 3.2 264.000 368.000 2500 3400 749/742 3.180
85.725
133.350 30.163 29.769 22.225 3.6 3.2 133.000 198.000 2700 3600 497/492A 1.410
146.050 41.275 41.275 31.750 3.6 3.2 220.000 320.000 2200 3200 665/653 2.600
152.400 39.688 36.322 33.338 3.5 3.3 180.000 279.000 2300 3100 593/592 2.780
88.900 161.925 47.625 48.260 38.100 3.6 3.2 273.000 391.000 2400 3200 759/752 4.100
161.925 53.974 55.100 42.862 2.8 2.2 330.000 510.000 2000 3000 6580/6535 4.800
89.974 146.975 40.000 40.000 32.500 7.1 3.6 206.000 310.000 2500 3300 HM218248/10 2.440
92.075 152.400 39.688 36.322 30.162 6.4 3.3 211.000 315.000 1900 2800 598A/592A 2.670
95.250
152.400 39.688 36.322 30.162 5.2 0.8 183.000 287.000 2400 3300 594A/592A 2.070
168.275 41.275 41.275 30.162 3.6 3.2 224.000 349.000 2200 3000 683/672 3.680
107.950 158.750 23.020 21.438 15.875 3.6 3.2 104.000 169.000 2200 3000 37425/625 1.380
63
25~40mm
52 18 1.0 35.80 34.70 3,652 3,539 7500 10000 22205CC 0.175

52 18 1.0 35.80 34.70 3,652 3,539 7500 10000 22205CK H305 0.175
25 52 18 1.0 35.80 34.70 3,652 3,539 7000 9800 22205KMBW33 H305 0.176
52 18 1.0 35.80 34.70 3,652 3,539 7000 9800 22205MBW33 0.177
72 19 1.1 51.50 49.40 5,253 5,039 5800 7800 21306CC 0.420

72 19 1.1 51.50 49.40 5,253 5,039 5800 7800 21306CK H306 0.420
72 19 1.1 51.50 49.40 5,253 5,039 5200 7400 21306KMBW33 H306 0.420
72 19 1.1 51.50 49.40 5,253 5,039 5200 7400 21306MBW33 0.420
30 62 20 1.0 49.40 48.70 5,039 4,967 6300 8500 22206CC 0.280
62 20 1.0 49.40 48.70 5,039 4,967 6300 8500 22206CK H306 0.280
62 20 1.0 49.40 48.70 5,039 4,967 6000 8000 22206KMBW33 H306 0.280
62 20 1.0 49.40 48.70 5,039 4,967 6000 8000 22206MBW33 0.290
80 21 1.5 63.10 61.30 6,436 6,253 5000 6700 21307CC 0.560

80 21 1.5 63.10 61.30 6,436 6,253 5000 6700 21307CK H307 0.560
80 21 1.5 63.10 61.30 6,436 6,253 5000 6700 21307KMBW33 H307 0.560
80 21 1.5 63.10 61.30 6,436 6,253 4500 6000 21307MBW33 0.560
72 23 1.1 68.70 70.30 7,007 7,171 5300 7000 22207CC 0.430
35 72 23 1.1 68.70 70.30 7,007 7,171 5300 7000 22207CK H307 0.430
72 23 1.1 68.70 70.30 7,007 7,171 5000 6600 22207KMBW33 H307 0.450
72 23 1.1 68.70 70.30 7,007 7,171 5000 6600 22207MBW33 0.450
80 31 1.5 105.00 107.00 10,710 10,914 5100 6700 22307CC 0.733
80 31 1.5 105.00 107.00 10,710 10,914 5100 6700 22307CK H2307 0.733
80 31 1.5 105.00 107.00 10,710 10,914 5100 6700 22307KMBW33 H2307 0.733
80 31 1.5 105.00 107.00 10,710 10,914 5100 6000 22307MBW33 0.733
90 23 1.5 82.80 82.20 8,446 8,384 4500 6000 21308CC 0.710

90 23 1.5 82.80 82.20 8,446 8,384 4500 6000 21308CK H308 0.700
90 23 1.5 82.80 82.20 8,446 8,384 4200 5600 21308KMBW33 H308 0.750
90 23 1.5 82.80 82.20 8,446 8,384 4200 5800 21308MBW33 0.750
80 23 1.1 77.50 81.50 7,905 8,313 4800 6300 22208CC 0.520
40 80 23 1.1 77.50 81.50 7,905 8,313 4800 6300 22208CK H308 0.510
80 23 1.1 77.50 81.50 7,905 8,313 4800 6000 22208KMBW33 H308 0.550
80 23 1.1 77.50 81.50 7,905 8,313 4500 6000 22208MBW33 0.550
90 33 1.5 125.00 134.00 12,750 13,668 4300 5600 22308CC 1.100
90 33 1.5 125.00 134.00 12,750 13,668 4300 5600 22308CK H2308 1.000
64
40~55mm
90 33 1.5 125.00 134.00 12,750 13,668 3800 5000 22308KMBW33 H2308 1.200
40 90 33 1.5 125.00 134.00 12,750 13,668 3800 5000 22308MBW33 1.200
100 25 1.5 102.00 103.00 10,404 10,506 4000 5300 21309CC 0.950
100 25 1.5 102.00 103.00 10,404 10,506 4000 5300 21309CK H309 0.940
100 25 1.5 102.00 103.00 10,404 10,506 3800 5000 21309KMBW33 H309 1.020
100 25 1.5 102.00 103.00 10,404 10,506 3800 5000 21309MBW33 1.020
85 23 1.1 82.30 85.90 8,395 8,762 4500 6000 22209CC 0.560
45 85 23 1.1 82.30 85.90 8,395 8,762 4500 6000 22209CK H309 0.550
85 23 1.1 82.30 85.90 8,395 8,762 4300 5800 22209KMBW33 H309 0.550
85 23 1.1 82.30 85.90 8,395 8,762 4300 5800 22209MBW33 0.590
100 36 1.5 150.00 156.00 15,300 15,912 3800 5000 22309CC 1.350
100 36 1.5 150.00 156.00 15,300 15,912 3800 5000 22309CK H2309 1.300
100 36 1.5 150.00 156.00 15,300 15,912 3400 4500 22309KMBW33 H2309 1.360
100 36 1.5 150.00 156.00 15,300 15,912 3400 4500 22309MBW33 1.360
110 27 2.0 121.00 124.00 12,342 12,648 3600 4800 21310CC 1.250
110 27 2.0 121.00 124.00 12,342 12,648 3600 4800 21310CK H310 1.200
110 27 2.0 121.00 124.00 12,342 12,648 3200 4500 21310KMBW33 H310 1.300
110 27 2.0 121.00 124.00 12,342 12,648 3200 4500 21310MBW33 1.300
90 23 1.1 87.40 93.90 8,915 9,578 4000 5300 22210CC 0.610
90 23 1.1 87.40 93.90 8,915 9,578 4000 5300 22210CK H310 0.600
50 90 23 1.1 87.40 93.90 8,915 9,578 3700 5000 22210KMBW33 H310 0.870
90 23 1.1 87.40 93.90 8,915 9,578 3700 5000 22210MBW33 0.870
110 40 2.0 184.00 203.00 18,768 20,706 3400 4500 22310CC 1.850
110 40 2.0 184.00 203.00 18,768 20,706 3400 4500 22310CK H2310 1.800
110 40 2.0 184.00 203.00 18,768 20,706 3000 4000 22310KMBW33 H2310 1.840
110 40 2.0 184.00 203.00 18,768 20,706 3000 4000 22310MBW33 1.840
120 29 2.0 158.00 191.00 16,116 19,482 3200 4300 21311CC 1.650
120 29 2.0 158.00 191.00 16,116 19,482 3200 4300 21311CK H311 1.600
120 29 2.0 158.00 191.00 16,116 19,482 3000 4000 21311KMBW33 H311 1.650
120 29 2.0 158.00 191.00 16,116 19,482 2800 3600 21311MBW33 2.430
55 100 25 1.5 109.00 118.00 11,118 12,036 3800 5000 22211CC 0.820
100 25 1.5 109.00 118.00 11,118 12,036 3800 500 22211CK H311 0.800
100 25 1.5 109.00 118.00 11,118 12,036 3500 4700 22211KMBW33 H311 0.860
100 25 1.5 109.00 118.00 11,118 12,036 3500 4700 22211MBW33 0.860
65
55~70mm
120 43 2.0 205.00 241.00 20,910 24,582 3000 4000 22311CC 2.350
120 43 2.0 205.00 241.00 20,910 24,582 3000 4000 22311CK H2311 2.300
55 120 43 2.0 205.00 241.00 20,910 24,582 2800 3600 22311KMBW33 H2311 2.430
120 43 2.0 205.00 241.00 20,910 24,582 2800 3600 22311MBW33 2.430
130 31 2.1 173.00 204.00 17,646 20,808 3400 4500 21312CC 1.950
130 31 2.1 173.00 204.00 17,646 20,808 3000 4000 21312CK H312 1.900
130 31 2.1 173.00 204.00 17,646 20,808 3100 4100 21312KMBW33 H312 2.100
130 31 2.1 173.00 204.00 17,646 20,808 3100 4100 21312MBW33 2.100
110 28 1.5 130.00 144.00 13,260 14,688 3400 4500 22212CC 1.160
110 28 1.5 130.00 144.00 13,260 14,688 3400 4500 22212CK H312 1.100
60 110 28 1.5 130.00 144.00 13,260 14,688 3100 4200 22212KMBW33 H312 1.220
110 28 1.5 130.00 144.00 13,260 14,688 3100 4200 22212MBW33 1.220
130 46 2.1 239.00 279.00 24,378 28,458 2800 3800 22312CC 2.950
130 46 2.1 239.00 279.00 24,378 28,458 2800 3800 22312CK H2312 2.850
130 46 2.1 239.00 279.00 24,378 28,458 2600 3400 22312KMBW33 H2312 2.980
130 46 2.1 239.00 279.00 24,378 28,458 2600 3400 22312MBW33 2.980
140 33 2.1 198.00 239.00 20,196 24,378 2800 3800 21313CC 2.450
140 33 2.1 198.00 239.00 20,196 24,378 2800 3800 21313CK H313 2.400
140 33 2.1 198.00 239.00 20,196 24,378 2300 3500 21313KMBW33 H313 2.570
140 33 2.1 198.00 239.00 20,196 24,378 2300 3500 21313MBW33 2.570
120 31 1.5 149.00 190.00 15,198 19,380 3000 4000 22213CC 1.450
120 31 1.5 149.00 190.00 15,198 19,380 3000 4000 22213CK H313 1.400
65 120 31 1.5 149.00 190.00 15,198 19,380 2800 3600 22213KMBW33 H313 1.730
120 31 1.5 149.00 190.00 15,198 19,380 2800 3600 22213MBW33 1.730
140 48 2.1 262.00 309.00 26,724 31,518 2800 3600 22313CC 3.550
140 48 2.1 262.00 309.00 26,724 31,518 2800 3600 22313CK H2313 3.450
140 48 2.1 262.00 309.00 26,724 31,518 2400 3200 22313KMBW33 H2313 3.510
140 48 2.1 262.00 309.00 26,724 31,518 2400 3200 22313MBW33 3.510
150 35 2.1 231.00 286.00 23,562 29,172 2600 3400 21314CC 3.100
150 35 2.1 231.00 286.00 23,562 29,172 2600 3400 21314CK H314 3.000
150 35 2.1 231.00 286.00 23,562 29,172 2200 3000 21314KMBW33 H314 3.110
70 150 35 2.1 231.00 286.00 23,562 29,172 2200 3000 21314MBW33 3.110
125 31 1.5 161.00 208.00 16,422 21,216 2800 3800 22214CC 1.550
125 31 1.5 161.00 208.00 16,422 21,216 2800 3800 22214CK H314 1.500
66
70~85mm
125 31 1.5 161.00 208.00 16,422 21,216 2200 3300 22214KMBW33 H314 1.660
125 31 1.5 161.00 208.00 16,422 21,216 2200 3300 22214MBW33 1.660
150 51 2.1 311.00 364.00 31,722 37,128 2400 3200 22314CC 4.350
70 150 51 2.1 311.00 364.00 31,722 37,128 2400 3200 22314CK H2314 4.300
150 51 2.1 311.00 364.00 31,722 37,128 2200 2800 22314KMBW33 H2314 4.300
150 51 2.1 311.00 364.00 31,722 37,128 2200 2800 22314MBW33 4.300
160 37 2.1 250.00 312.00 25,500 31,824 2400 3200 21315CC 3.550
160 37 2.1 250.00 312.00 25,500 31,824 2400 3200 21315CK H315 3.500
160 37 2.1 250.00 312.00 25,500 31,824 2100 2900 21315KMBW33 H315 3.760
160 37 2.1 250.00 312.00 25,500 31,824 2100 2900 21315MBW33 3.760
130 31 1.5 167.00 221.00 17,034 22,542 2800 3800 22215CC 1.650
130 31 1.5 167.00 221.00 17,034 22,542 2800 3800 22215CK H315 1.600
75 130 31 1.5 167.00 221.00 17,034 22,542 2600 3400 22215KMBW33 H315 1.720
130 31 1.5 167.00 221.00 17,034 22,542 2600 3400 22215MBW33 1.720
160 55 2.1 342.00 412.00 34,884 42,024 2200 3000 22315CC 5.250
160 55 2.1 342.00 412.00 34,884 42,024 2200 3000 22315CK H2315 5.150
160 55 2.1 342.00 412.00 34,884 42,024 2200 2800 22315KMBW33 H2315 5.260
160 55 2.1 342.00 412.00 34,884 42,024 2200 2800 22315MBW33 5.260
170 39 2.1 256.00 316.00 26,112 32,232 2200 3000 21316CC 4.250
170 39 2.1 256.00 316.00 26,112 32,232 2200 3000 21316CK H316 4.200
170 39 2.1 256.00 316.00 26,112 32,232 1800 2400 21316KMBW33 H316 6.200
170 39 2.1 256.00 316.00 26,112 32,232 1800 2400 21316MBW33 6.200
140 33 2.0 201.00 249.00 20,502 25,398 2600 3400 22216CC 2.050
140 33 2.0 201.00 249.00 20,502 25,398 2600 3400 22216CK H316 2.050
80 140 33 2.0 201.00 249.00 20,502 25,398 2200 3000 22216KMBW33 H316 2.140
140 33 2.0 201.00 249.00 20,502 25,398 2200 3000 22216MBW33 2.140
170 58 2.1 392.00 480.00 39,984 48,960 2000 2600 22316CC 6.290
170 58 2.1 392.00 480.00 39,984 48,960 2000 2600 22316CK H2316 6.290
170 58 2.1 392.00 480.00 39,984 48,960 1800 2400 22316KMBW33 H2316 6.100
170 58 2.1 392.00 480.00 39,984 48,960 1800 2400 22316MBW33 6.200
180 41 3.0 304.00 387.00 31,008 39,474 2200 2800 21317CC 5.100
180 41 3.0 304.00 387.00 31,008 39,474 2200 2800 21317CK H317 5.000
85 180 41 3.0 304.00 387.00 31,008 39,474 1900 2400 21317KMBW33 H317 5.230
180 41 3.0 304.00 387.00 31,008 39,474 1900 2400 21317MBW33 5.230
67
85~95mm
150 36 2.0 224.00 285.00 22,848 29,070 2400 3200 22217CC 2.570
150 36 2.0 224.00 285.00 22,848 29,070 2400 3200 22217CK H317 2.500
150 36 2.0 224.00 285.00 22,848 29,070 2200 2800 22217KMBW33 H317 2.780
150 36 2.0 224.00 285.00 22,848 29,070 2200 2800 22217MBW33 2.780
85 180 60 3.0 397.00 481.00 40,494 49,062 1800 2400 22317CC 8.590
180 60 3.0 397.00 481.00 40,494 49,062 1800 2400 22317CK H2317 8.590
180 60 3.0 397.00 481.00 40,494 49,062 1700 2200 22317KMBW33 H2317 7.200
180 60 3.0 397.00 481.00 40,494 49,062 1700 2200 22317MBW33 7.220
190 43 3.0 347.00 443.00 35,394 45,186 2200 2800 21318CC 5.800
190 43 3.0 347.00 443.00 35,394 45,186 2200 2800 21318CK H318 5.700
190 43 3.0 347.00 443.00 35,394 45,186 1800 2500 21318KMBW33 H318 6.170
190 43 3.0 347.00 443.00 35,394 45,186 1800 2500 21318MBW33 6.170
160 40 2.0 246.00 330.00 25,092 33,660 2200 3000 22218CC 3.400
160 40 2.0 246.00 330.00 25,092 33,660 2200 300 22218CK H318 3.200
160 40 2.0 246.00 330.00 25,092 33,660 2200 2800 22218KMBW33 H318 3.570
160 40 2.0 246.00 330.00 25,092 33,660 2200 2800 22218MBW33 3.570
90 190 64 3.0 458.00 556.00 46,716 56,712 1800 2400 22318CC 8.700
190 64 3.0 458.00 556.00 46,716 56,712 1800 2400 22318CK H2318 8.500
190 64 3.0 458.00 556.00 46,716 56,712 1700 2200 22318KMBW33 H2318 8.690
190 64 3.0 458.00 556.00 46,716 56,712 1700 2200 22318MBW33 8.690
160 52.4 2.0 317.00 459.00 32,334 46,818 2200 3000 23218CC 4.400
160 52.4 2.0 317.00 459.00 32,334 46,818 2200 3000 23218CK H2318 4.700
160 52.4 2.0 317.00 459.00 32,334 46,818 1500 2000 23218KMBW33 H2318 4.600
160 52.4 2.0 317.00 459.00 32,334 46,818 1500 2000 23218MBW33 4.600
200 45 3.0 373.00 480.00 38,046 48,960 1900 2600 21319CC 7.150
200 45 3.0 373.00 480.00 38,046 48,960 1900 2600 21319CK H319 7.150
200 45 3.0 373.00 480.00 38,046 48,960 1800 2400 21319KMBW33 H319 7.000
200 45 3.0 373.00 480.00 38,046 48,960 1800 2400 21319MBW33 7.150
170 43 2.1 296.00 386.00 30,192 39,372 2200 2800 22219CC 4.260
95 170 43 2.1 296.00 386.00 30,192 39,372 2200 2800 22219CK H319 4.260
170 43 2.1 296.00 386.00 30,192 39,372 2000 2600 22219KMBW33 H319 4.000
170 43 2.1 296.00 386.00 30,192 39,372 2000 2600 22219MBW33 4.240
200 67 3.0 504.00 623.00 51,408 63,546 1700 2200 22319CC 11.300
200 67 3.0 504.00 623.00 51,408 63,546 1700 2200 22319CK H2319 11.300
200 67 3.0 504.00 623.00 51,408 63,546 1500 2000 22319KMBW33 H2319 10.000
68
95~110mm
95 200 67 3.0 504.00 623.00 51,408 63,546 1500 2000 22319MBW33 10.100
215 47 3.0 414.00 528.00 42,228 53,856 1800 2400 21320CC 8.810
215 47 3.0 414.00 528.00 42,228 53,856 1800 2400 21320CK H320 8.810
215 47 3.0 414.00 528.00 42,228 53,856 1700 2200 21320KMBW33 H320 8.300
215 47 3.0 414.00 528.00 42,228 53,856 1700 2200 21320MBW33 8.800
180 46 2.1 335.00 453.00 34,170 46,206 2200 2800 22220CC 5.240
180 46 2.1 335.00 453.00 34,170 46,206 2200 2800 22220CK H320 5.240
180 46 2.1 335.00 453.00 34,170 46,206 2000 2600 22220KMBW33 H320 4.800
180 46 2.1 335.00 453.00 34,170 46,206 2000 2600 22220MBW33 4.850
215 73 3.0 579.00 713.00 59,058 72,726 1500 2000 22320CC 13.200
215 73 3.0 579.00 713.00 59,058 72,726 1500 2000 22320CK H2320 13.000
215 73 3.0 579.00 713.00 59,058 72,726 1400 1800 22320KMBW33 H2320 12.700
100 215 73 3.0 579.00 713.00 59,058 72,726 1400 1800 22320MBW33 12.700
165 52 2.0 297.00 493.00 30,294 50,286 2200 3000 23120CC 4.310
165 52 2.0 297.00 493.00 30,294 50,286 2200 3000 23120CK H3120 4.310
165 52 2.0 297.00 493.00 30,294 50,286 2000 2600 23120KMBW33 H3120 4.400
165 52 2.0 297.00 493.00 30,294 50,286 2000 2600 23120MBW33 4.500
180 60.3 2.1 415.00 599.00 42,330 61,098 1700 2200 23220CC 7.340
180 60.3 2.1 415.00 599.00 42,330 61,098 1700 2200 23220CK H2320 7.340
180 60.3 2.1 415.00 599.00 42,330 61,098 1500 2000 23220KMBW33 H2320 6.500
180 60.3 2.1 415.00 599.00 42,330 61,098 1500 2000 23220MBW33 6.700
150 50 1.5 251.00 448.00 25,602 45,696 1600 2100 24020CC 3.035
150 50 1.5 251.00 448.00 25,602 45,696 1600 2100 24020CK 3.035
150 50 1.5 251.00 448.00 25,602 45,696 1600 2100 24020K30MBW33 3.035
150 50 1.5 251.00 448.00 25,602 45,696 1600 2100 24020MBW33 3.035
200 53 2.1 411.00 553.00 41,922 56,406 1900 2500 22222CC 7.250
200 53 2.1 411.00 553.00 41,922 56,406 1900 2500 22222CK H322 7.250
200 53 2.1 411.00 553.00 41,922 56,406 1700 2200 22222KMBW33 H322 7.000
200 53 2.1 411.00 553.00 41,922 56,406 1700 2200 22222MBW33 7.100
240 80 3.0 713.00 884.00 72,726 90,168 1400 1900 22322CC 18.000
110 240 80 3.0 713.00 884.00 72,726 90,168 1400 1900 22322CK H2322 17.500
240 80 3.0 713.00 884.00 72,726 90,168 1300 1700 22322KMBW33 H2322 17.700
240 80 3.0 713.00 884.00 72,726 90,168 1300 1700 22322MBW33 17.700
170 45 2.0 286.00 478.00 29,172 48,756 2100 2800 23022CC 3.680
170 45 2.0 286.00 478.00 29,172 48,756 2100 2800 23022CK H3022 3.680
69
110~120mm
170 45 2.0 286.00 478.00 29,172 48,756 2000 2600 23022KMBW33 H3022 3.750
170 45 2.0 286.00 478.00 29,172 48,756 2000 2600 23022MBW33 3.750
180 56 2.0 346.00 591.00 35,292 60,282 2000 2600 23122CC 6.260
180 56 2.0 346.00 591.00 35,292 60,282 2000 2600 23122CK H3122 6.260
180 56 2.0 346.00 591.00 35,292 60,282 1800 2400 23122KMBW33 H3122 5.500
180 56 2.0 346.00 591.00 35,292 60,282 1800 2400 23122MBW33 5.550
110 200 69.8 2.1 525.00 786.00 53,550 80,172 1400 1800 23222CC 10.800
200 69.8 2.1 525.00 786.00 53,550 80,172 1400 1800 23222CK H2322 10.800
200 69.8 2.1 525.00 786.00 53,550 80,172 1200 1600 23222KMBW33 H2322 9.500
200 69.8 2.1 525.00 786.00 53,550 80,172 1200 1600 23222MBW33 9.700
180 69 2.0 472.00 798.00 48,144 81,396 1600 2000 24122CC 6.630
180 69 2.0 472.00 798.00 48,144 81,396 1600 2000 24122CK 6.630
180 69 2.0 472.00 798.00 48,144 81,396 1600 2000 24122K30MBW33 6.630
180 69 2.0 472.00 798.00 48,144 81,396 1600 2000 24122MBW33 6.630
215 58 2.1 492.00 673.00 50,184 68,646 1700 2200 22224CC 8.700
215 58 2.1 492.00 673.00 50,184 68,646 1700 2200 22224CK H3124 8.600
215 58 2.1 492.00 673.00 50,184 68,646 1500 2000 22224KMBW33 H3124 9.040
215 58 2.1 492.00 673.00 50,184 68,646 1500 2000 22224MBW33 9.040
260 86 3.0 812.00 1,050.00 82,824 107,100 1300 1700 22324CC 24.500
260 86 3.0 812.00 1,050.00 82,824 107,100 1300 1700 22324CK H2324 24.500
260 86 3.0 812.00 1,050.00 82,824 107,100 1100 1500 22324KMBW33 H2324 21.800
260 86 3.0 812.00 1,050.00 82,824 107,100 1100 1500 22324MBW33 22.000
180 46 2.0 299.00 517.00 30,498 52,734 2000 2600 23024CC 4.250
180 46 2.0 299.00 517.00 30,498 52,734 2000 2600 23024CK H3024 4.250
120 180 46 2.0 299.00 517.00 30,498 52,734 1800 2400 23024KMBW33 H3024 4.100
180 46 2.0 299.00 517.00 30,498 52,734 1800 2400 23024MBW33 4.200
200 62 2.0 447.00 760.00 45,594 77,520 1800 2400 23124CC 7.670
200 62 2.0 447.00 760.00 45,594 77,520 1800 2400 23124CK H3124 7.670
200 62 2.0 447.00 760.00 45,594 77,520 1700 2200 23124KMBW33 H3124 7.600
200 62 2.0 447.00 760.00 45,594 77,520 1700 2200 23124MBW33 7.800
215 76 2.1 583.00 894.00 59,466 91,188 1300 1700 23224CC 13.100
215 76 2.1 583.00 894.00 59,466 91,188 1300 1700 23224CK H2324 13.100
215 76 2.1 583.00 894.00 59,466 91,188 1100 1500 23224KMBW33 H2324 11.800
215 76 2.1 583.00 894.00 59,466 91,188 1100 1500 23224MBW33 12.000
180 60 2.0 391.00 695.00 39,882 70,890 1500 2000 24024CC 5.050
180 60 2.0 391.00 695.00 39,882 70,890 1500 2000 24024CK 5.050
180 60 2.0 391.00 695.00 39,882 70,890 1500 2000 24024K30MBW33 5.300
70
120~140mm
180 60 2.0 391.00 695.00 39,882 70,890 1400 1800 24024MBW33 5.120
200 80 2.0 592.00 1,028.00 60,384 104,856 1400 1800 24124CC 9.650
120 200 80 2.0 592.00 1,028.00 60,384 104,856 1400 1800 24124CK 9.650
200 80 2.0 592.00 1,028.00 60,384 104,856 1000 1300 24124K30MBW33 10.000
200 80 2.0 592.00 1,028.00 60,384 104,856 1000 1300 24124MBW33 10.200
230 64 3.0 569.00 789.00 58,038 80,478 1700 2200 22226CC 14.000
230 64 3.0 569.00 789.00 58,038 80,478 1700 2200 22226CK H3126 14.000
230 64 3.0 569.00 789.00 58,038 80,478 1500 2000 22226KMBW33 H3126 11.200
230 64 3.0 569.00 789.00 58,038 80,478 1500 2000 22226MBW33 11.200
280 93 4.0 948.00 1,200.00 96,696 122,400 1200 1600 22326CC 34.200
280 93 4.0 948.00 1,200.00 96,696 122,400 1200 1600 22326CK H2326 34.200
280 93 4.0 948.00 1,200.00 96,696 122,400 1100 1400 22326KMBW33 H2326 28.300
280 93 4.0 948.00 1,200.00 96,696 122,400 1100 1400 22326MBW33 28.500
200 52 2.0 377.00 654.00 38,454 66,708 1800 2400 23026CC 4.590
200 52 2.0 377.00 654.00 38,454 66,708 1400 1800 23026CK H3026 7.550
200 52 2.0 377.00 654.00 38,454 66,708 1700 2200 23026KMBW33 H3026 6.000
200 52 2.0 377.00 654.00 38,454 66,708 1700 2200 23026MBW33 6.100
210 64 2.0 506.00 826.00 51,612 84,252 1700 2200 23126CC 9.700
130 210 64 2.0 506.00 826.00 51,612 84,252 1700 2200 23126CK H3126 9.700
210 64 2.0 506.00 826.00 51,612 84,252 1500 2000 23126KMBW33 H3126 8.300
210 64 2.0 506.00 826.00 51,612 84,252 1500 2000 23126MBW33 8.550
230 80 3.0 668.00 1,030.00 68,136 105,060 1300 1700 23226CC 15.800
230 80 3.0 668.00 1,030.00 68,136 105,060 1300 1700 23226CK H2326 15.800
230 80 3.0 668.00 1,030.00 68,136 105,060 1100 1500 23226KMBW33 H2326 13.800
230 80 3.0 668.00 1,030.00 68,136 105,060 1100 1500 23226MBW33 14.000
200 69 2.0 486.00 878.00 49,572 89,556 1400 1800 24026CC 7.550
200 69 2.0 486.00 878.00 49,572 89,556 1400 1800 24026CK 7.550
200 69 2.0 486.00 878.00 49,572 89,556 1200 1600 24026K30MBW33 7.850
200 69 2.0 486.00 878.00 49,572 89,556 1200 1600 24026MBW33 7.950
210 80 2.0 603.00 1,061.00 61,506 108,222 1300 1700 24126CC 10.300
210 80 2.0 603.00 1,061.00 61,506 108,222 1300 1700 24126CK 10.300
210 80 2.0 603.00 1,061.00 61,506 108,222 900 1200 24126K30MBW33 10.800
210 80 2.0 603.00 1,061.00 61,506 108,222 900 1200 24126MBW33 11.000
250 68 3.0 658.00 928.00 67,116 94,656 1400 1900 22228CC 14.400
140 250 68 3.0 658.00 928.00 67,116 94,656 1400 1900 22228CK H3128 20.800
250 68 3.0 658.00 928.00 67,116 94,656 1300 1700 22228KMBW33 H3128 13.800
71
140~150mm
250 68 3.0 658.00 928.00 67,116 94,656 1300 1700 22228MBW33 14.000
300 102 4.0 1,100.00 1,410.00 112,200 143,820 1100 1400 22328CC 45.700
300 102 4.0 1,100.00 1,410.00 112,200 143,820 1100 1400 22328CK H2328 45.700
300 102 4.0 1,100.00 1,410.00 112,200 143,820 1000 1300 22328KMBW33 H2328 34.100
300 102 4.0 1,100.00 1,410.00 112,200 143,820 1000 1300 22328MBW33 34.500
210 53 2.0 428.00 737.00 43,656 75,174 1700 2200 23028CC 7.200
210 53 2.0 428.00 737.00 43,656 75,174 1700 2200 23028CK H3028 7.200
210 53 2.0 428.00 737.00 43,656 75,174 1500 2000 23028KMBW33 H3028 6.000
210 53 2.0 428.00 737.00 43,656 75,174 1500 2000 23028MBW33 6.550
225 68 2.1 561.00 934.00 57,222 95,268 1500 2000 23128CC 11.800
225 68 2.1 561.00 934.00 57,222 95,268 1200 1600 23128CK H3128 12.500
140 225 68 2.1 561.00 934.00 57,222 95,268 1400 1800 23128KMBW33 H3128 10.200
225 68 2.1 561.00 934.00 57,222 95,268 1400 1800 23128MBW33 10.500
250 88 3.0 787.00 1,230.00 80,274 125,460 1100 1400 23228CC 20.800
250 88 3.0 787.00 1,230.00 80,274 125,460 1100 1400 23228CK H2328 20.800
250 88 3.0 787.00 1,230.00 80,274 125,460 1000 1300 23228KMBW33 H2328 18.200
250 88 3.0 787.00 1,230.00 80,274 125,460 1000 1300 23228MBW33 18.500
210 69 2.0 503.00 922.00 51,306 94,044 1300 1700 24028CC 8.010
210 69 2.0 503.00 922.00 51,306 94,044 1300 1700 24028CK 8.010
210 69 2.0 503.00 922.00 51,306 94,044 1100 1500 24028K30MBW33 8.350
210 69 2.0 503.00 922.00 51,306 94,044 1100 1500 24028MBW33 8.450
225 85 2.1 690.00 1,236.00 70,380 126,072 1200 1600 24128CC 12.500
225 85 2.1 690.00 1,236.00 70,380 126,072 1200 1600 24128CK 12.500
225 85 2.1 690.00 1,236.00 70,380 126,072 850 1100 24128K30MBW33 13.000
225 85 2.1 690.00 1,236.00 70,380 126,072 850 1100 24128MBW33 13.200
270 73 3.0 720.00 1,020.00 73,440 104,040 1200 1600 22230KMBW33 H3130 17.710
270 73 3.0 720.00 1,020.00 73,440 104,040 1200 1600 22230MBW33 18.000
320 108 4.0 1,230.00 1,600.00 125,460 163,200 1000 1300 22330KMBW33 H2330 43.100
320 108 4.0 1,230.00 1,600.00 125,460 163,200 1000 1300 22330MBW33 43.500
225 56 2.1 467.00 812.00 47,634 82,824 1500 2000 23030CC 8.570
150 225 56 2.1 467.00 812.00 47,634 82,824 1500 2000 23030CK H3030 8.570
225 56 2.1 467.00 812.00 47,634 82,824 1400 1800 23030KMBW33 H3030 7.800
225 56 2.1 467.00 812.00 47,634 82,824 1400 1800 23030MBW33 7.950
250 80 2.1 689.00 1,230.00 70,278 125,460 1400 1900 23130CC 15.700
250 80 2.1 689.00 1,230.00 70,278 125,460 1400 1900 23130CK H3130 15.700
250 80 2.1 689.00 1,230.00 70,278 125,460 1300 1700 23130KMBW33 H3130 16.000
250 80 2.1 689.00 1,230.00 70,278 125,460 1300 1700 23130MBW33 16.300
72
150~170mm
270 96 3.0 924.00 1,470.00 94,248 149,940 1000 1300 23230KMBW33 H2330 24.000
270 96 3.0 924.00 1,470.00 94,248 149,940 1000 1300 23230MBW33 24.500
225 75 2.1 587.00 1,100.00 59,874 112,200 1200 1500 24030CC 10.100
225 75 2.1 587.00 1,100.00 59,874 112,200 1200 1500 24030CK 10.100
225 75 2.1 587.00 1,100.00 59,874 112,200 1100 1400 24030K30MBW33 10.500
150 225 75 2.1 587.00 1,100.00 59,874 112,200 1100 1400 24030MBW33 10.500
250 100 2.1 910.00 1,650.00 92,820 168,300 1100 1400 24130CC 19.000
250 100 2.1 910.00 1,650.00 92,820 168,300 1100 1400 24130CK 19.000
250 100 2.1 910.00 1,650.00 92,820 168,300 850 1100 24130K30MBW33 19.100
250 100 2.1 910.00 1,650.00 92,820 168,300 850 1100 24130MBW33 19.500
290 80 3.0 885.00 1,270.00 90,270 129,540 1100 1500 22232KMBW33 H3132 22.900
290 80 3.0 885.00 1,270.00 90,270 129,540 1100 1500 22232MBW33 23.300
340 114 4.0 1,380.00 1,790.00 140,760 182,580 1000 1200 22332KMBW33 H2332 50.000
340 114 4.0 1,380.00 1,790.00 140,760 182,580 1000 1200 22332MBW33 50.800
240 60 2.1 539.00 944.00 54,978 96,288 900 1100 23032KMBW33 H3032 9.500
240 60 2.1 539.00 944.00 54,978 96,288 900 1100 23032MBW33 9.700
160 270 86 2.1 796.00 1,380.00 81,192 140,760 840 1000 23132KMBW33 H3132 20.100
270 86 2.1 796.00 1,380.00 81,192 140,760 840 1000 23132MBW33 20.500
290 104 3.0 1,030.00 1,650.00 105,060 168,300 800 950 23232KMBW33 H2332 31.100
290 104 3.0 1,030.00 1,650.00 105,060 168,300 800 950 23232MBW33 31.700
240 80 2.1 670.00 1,260.00 68,340 128,520 725 900 24032K30MBW33 13.000
240 80 2.1 670.00 1,260.00 68,340 128,520 725 900 24032MBW33 13.300
270 109 2.1 1,070.00 1,930.00 109,140 196,860 725 900 24132K30MBW33 24.600
270 109 2.1 1,070.00 1,930.00 109,140 196,860 725 900 24132MBW33 24.600
310 86 4.0 952.00 1,390.00 97,104 141,780 1100 1400 22234KMBW33 H3134 28.400
310 86 4.0 952.00 1,390.00 97,104 141,780 1100 1400 22234MBW33 28.900
360 120 4.0 1,460.00 1,920.00 148,920 195,840 1000 1100 22334KMBW33 H2334 60.200
360 120 4.0 1,460.00 1,920.00 148,920 195,840 1000 1100 22334MBW33 62.200
260 67 2.1 609.00 1,110.00 62,118 113,220 900 1000 23034KMBW33 H3034 13.300
170 260 67 2.1 609.00 1,110.00 62,118 113,220 900 1000 23034MBW33 13.400
280 88 2.1 888.00 1,490.00 90,576 151,980 850 950 23134KMBW33 H3134 22.000
280 88 2.1 888.00 1,490.00 90,576 151,980 850 950 23134MBW33 22.300
310 110 4.0 1,150.00 1,870.00 117,300 190,740 850 950 23234KMBW33 H2334 37.200
310 110 4.0 1,150.00 1,870.00 117,300 190,740 850 950 23234MBW33 37.800
260 90 2.1 816.00 1,565.00 83,232 159,630 750 900 24034K30MBW33 17.200
73
170~200mm
260 90 2.1 816.00 1,565.00 83,232 159,630 750 900 24034MBW33 17.700
170 280 109 2.1 1,100.00 1,980.00 112,200 201,960 750 900 24134K30MBW33 26.000
280 109 2.1 1,100.00 1,980.00 112,200 201,960 750 900 24134MBW33 26.400
320 86 4.0 978.00 1,450.00 99,756 147,900 1100 1400 22236KMBW33 H3136 29.400
320 86 4.0 978.00 1,450.00 99,756 147,900 1100 1400 22236MBW33 30.400
380 126 4.0 1,740.00 2,360.00 177,480 240,720 1000 1300 22336KMBW33 H2336 68.200
380 126 4.0 1,740.00 2,360.00 177,480 240,720 1000 1300 22336MBW33 69.000
280 74 2.1 710.00 1,290.00 72,420 131,580 1050 1200 23036KMBW33 H3036 17.000
280 74 2.1 710.00 1,290.00 72,420 131,580 1050 1200 23036MBW33 17.600
180 300 96 3.0 1,000.00 1,800.00 102,000 183,600 1000 1100 23136KMBW33 H3136 28.000
300 96 3.0 1,000.00 1,800.00 102,000 183,600 1000 1100 23136MBW33 28.400
320 112 4.0 1,190.00 1,980.00 121,380 201,960 950 1000 23236KMBW33 H2336 40.100
320 112 4.0 1,190.00 1,980.00 121,380 201,960 950 1000 23236MBW33 40.800
280 100 2.1 955.00 1,870.00 97,410 190,740 900 1200 24036K30MBW33 23.000
280 100 2.1 955.00 1,870.00 97,410 190,740 900 1200 24036MBW33 23.200
300 118 3.0 1,240.00 2,280.00 126,480 232,560 900 1200 24136K30MBW33 32.000
300 118 3.0 1,240.00 2,280.00 126,480 232,560 900 1200 24136MBW33 32.000
340 92 4.0 1,110.00 1,730.00 113,220 176,460 1000 1300 22238KMBW33 H3138 37.200
340 92 4.0 1,110.00 1,730.00 113,220 176,460 1000 1300 22238MBW33 37.700
400 132 5.0 1,900.00 2,610.00 193,800 266,220 1000 1200 22338KMBW33 H2338 83.000
400 132 5.0 1,900.00 2,610.00 193,800 266,220 1000 1200 22338MBW33 84.800
290 75 2.1 736.00 1,370.00 75,072 139,740 850 1100 23038KMBW33 H3038 18.000
290 75 2.1 736.00 1,370.00 75,072 139,740 850 1100 23038MBW33 18.600
190 320 104 3.0 1,090.00 2,000.00 111,180 204,000 850 1100 23138KMBW33 H3138 35.000
320 104 3.0 1,090.00 2,000.00 111,180 204,000 850 1100 23138MBW33 35.600
340 120 4.0 1,410.00 2,210.00 143,820 225,420 750 1000 23238KMBW33 H2338 48.100
340 120 4.0 1,410.00 2,210.00 143,820 225,420 750 1000 23238MBW33 48.900
290 100 2.1 1,004.00 1,960.00 102,408 199,920 700 900 24038K30MBW33 24.000
290 100 2.1 1,004.00 1,960.00 102,408 199,920 700 900 24038MBW33 24.300
320 128 3.0 1,450.00 2,660.00 147,900 271,320 600 800 24138K30MBW33 41.200
320 128 3.0 1,450.00 2,660.00 147,900 271,320 600 800 24138MBW33 41.800
360 98 4.0 1,230.00 1,930.00 125,460 196,860 930 1200 22240KMBW33 H3140 47.700
200 360 98 4.0 1,230.00 1,930.00 125,460 196,860 930 1200 22240MBW33 47.700
420 138 5.0 2,010.00 2,750.00 205,020 280,500 700 1000 22340KMBW33 H2340 95.000
74
200~240mm
420 138 5.0 2,010.00 2,750.00 205,020 280,500 700 1000 22340MBW33 95.000
310 82 2.1 890.00 1,670.00 90,780 170,340 850 1000 23040KMBW33 H3040 23.500
310 82 2.1 890.00 1,670.00 90,780 170,340 850 1000 23040MBW33 23.500
340 112 3.0 1,240.00 2,250.00 126,480 229,500 850 1000 23140KMBW33 H3140 43.500
340 112 3.0 1,240.00 2,250.00 126,480 229,500 850 1000 23140MBW33 43.500
200 360 128 4.0 1,550.00 2,610.00 158,100 266,220 750 900 23240KMBW33 H2340 58.500
360 128 4.0 1,550.00 2,610.00 158,100 266,220 750 900 23240MBW33 58.500
310 109 2.1 1,150.00 2,280.00 117,300 232,560 700 800 24040K30MBW33 30.500
310 109 2.1 1,150.00 2,280.00 117,300 232,560 700 800 24040MBW33 30.500
340 140 3.0 1,620.00 3,030.00 165,240 309,060 560 750 24140K30MBW33 51.500
340 140 3.0 1,620.00 3,030.00 165,240 309,060 560 750 24140MBW33 51.500
400 108 4.0 1,630.00 2,450.00 166,260 249,900 850 1100 22244KMBW33 H3144 63.000
400 108 4.0 1,630.00 2,450.00 166,260 249,900 850 1100 22244MBW33 63.000
460 145 5.0 2,380.00 3,380.00 242,760 344,760 720 960 22344KMBW33 H2344 120.000
460 145 5.0 2,380.00 3,380.00 242,760 344,760 720 960 22344MBW33 120.000
340 90 3.0 984.00 1,890.00 100,368 192,780 720 920 23044KMBW33 H3044 31.500
340 90 3.0 984.00 1,890.00 100,368 192,780 720 920 23044MBW33 31.500
370 120 4.0 1,440.00 2,700.00 146,880 275,400 720 920 23144KMBW33 H3144 54.500
220 370 120 4.0 1,440.00 2,700.00 146,880 275,400 720 920 23144MBW33 54.500
400 144 4.0 1,880.00 3,200.00 191,760 326,400 600 800 23244KMBW33 H2344 82.500
400 144 4.0 1,880.00 3,200.00 191,760 326,400 600 800 23244MBW33 82.500
340 118 3.0 1,370.00 2,760.00 139,740 281,520 550 750 24044K30MBW33 39.500
340 118 3.0 1,370.00 2,760.00 139,740 281,520 550 750 24044MBW33 39.500
370 150 4.0 1,900.00 3,580.00 193,800 365,160 530 700 24144K30MBW33 65.000
370 150 4.0 1,900.00 3,580.00 193,800 365,160 530 700 24144MBW33 65.000
440 120 4.0 1,960.00 3,050.00 199,920 311,100 750 1000 22248KMBW33 H3148 85.500
440 120 4.0 1,960.00 3,050.00 199,920 311,100 750 1000 22248MBW33 85.500
500 155 5.0 2,610.00 4,020.00 266,220 410,040 700 900 22348KMBW33 H2348 151.000
500 155 5.0 2,610.00 4,020.00 266,220 410,040 700 900 22348MBW33 151.000
240 360 92 3.0 1,100.00 2,170.00 112,200 221,340 860 840 23048KMBW33 H3048 34.500
360 92 3.0 1,100.00 2,170.00 112,200 221,340 860 840 23048MBW33 34.500
400 128 4.0 1,630.00 3,080.00 166,260 314,160 600 800 23148KMBW33 H3148 67.500
400 128 4.0 1,630.00 3,080.00 166,260 314,160 600 800 23148MBW33 67.500
440 160 4.0 2,340.00 3,990.00 238,680 406,980 560 750 23248KMBW33 H2348 110.000
440 160 4.0 2,340.00 3,990.00 238,680 406,980 560 750 23248MBW33 110.000
75
240~300mm
360 118 3.0 1,440.00 2,930.00 146,880 298,860 500 700 24048K30MBW33 42.500
360 118 3.0 1,440.00 2,930.00 146,880 298,860 500 700 24048MBW33 42.500
240 400 160 4.0 2,160.00 4,090.00 220,320 417,180 480 630 24148K30MBW33 80.500
400 160 4.0 2,160.00 4,090.00 220,320 417,180 480 630 24148MBW33 80.500
480 130 5.0 2,240.00 3,450.00 228,480 351,900 670 900 22252KMBW33 H3152 111.000
480 130 5.0 2,240.00 3,450.00 228,480 351,900 670 900 22252MBW33 111.000
540 165 6.0 2,830.00 4,380.00 288,660 446,760 620 780 22352KMBW33 H2352 95.300
540 165 6.0 2,830.00 4,380.00 288,660 446,760 620 780 22352MBW33 95.300
400 104 4.0 1,330.00 2,570.00 135,660 262,140 600 720 23052KMBW33 H3052 50.500
400 104 4.0 1,330.00 2,570.00 135,660 262,140 600 720 23052MBW33 50.500
260 440 144 4.0 2,100.00 3,860.00 214,200 393,720 550 690 23152KMBW33 H3152 93.500
440 144 4.0 2,100.00 3,860.00 214,200 393,720 550 690 23152MBW33 93.500
480 174 5.0 2,750.00 4,640.00 280,500 473,280 500 670 23252KMBW33 H2352 142.000
480 174 5.0 2,750.00 4,640.00 280,500 473,280 500 670 23252MBW33 142.000
400 140 4.0 1,840.00 3,850.00 187,680 392,700 600 800 24052K30MBW33 66.000
400 140 4.0 1,840.00 3,850.00 187,680 392,700 600 800 24052MBW33 66.000
440 180 4.0 2,730.00 5,330.00 278,460 543,660 500 670 24152K30MBW33 114.000
440 180 4.0 2,730.00 5,330.00 278,460 543,660 500 670 24152MBW33 114.000
500 130 5.0 2,360.00 3,650.00 240,720 372,300 630 850 22256KMBW33 H3156 116.000
500 130 5.0 2,360.00 3,650.00 240,720 372,300 630 850 22256MBW33 116.000
580 175 6.0 3,150.00 4,910.00 321,300 500,820 530 710 22356KMBW33 H2356 238.000
580 175 6.0 3,150.00 4,910.00 321,300 500,820 530 710 22356MBW33 238.000
420 106 4.0 1,430.00 2,860.00 145,860 291,720 750 1000 23056KMBW33 H3056 53.000
420 106 4.0 1,430.00 2,860.00 145,860 291,720 750 1000 23056MBW33 53.000
280 460 146 5.0 2,140.00 4,280.00 218,280 436,560 670 900 23156KMBW33 H3156 100.000
460 146 5.0 2,140.00 4,280.00 218,280 436,560 670 900 23156MBW33 100.000
500 176 5.0 2,690.00 4,910.00 274,380 500,820 480 630 23256KMBW33 H2356 153.000
500 176 5.0 2,690.00 4,910.00 274,380 500,820 480 630 23256MBW33 153.000
420 140 4.0 1,960.00 4,100.00 199,920 418,200 560 750 24056K30MBW33 68.500
420 140 4.0 1,960.00 4,100.00 199,920 418,200 560 750 24056MBW33 68.500
460 180 5.0 2,810.00 5,480.00 286,620 558,960 400 530 24156K30MBW33 118.000
460 180 5.0 2,810.00 5,480.00 286,620 558,960 400 530 24156MBW33 118.000
460 118 4.0 1,750.00 3,480.00 178,500 354,960 670 900 23060KMBW33 H3060 73.500
300 460 118 4.0 1,750.00 3,480.00 178,500 354,960 670 900 23060MBW33 73.500
76
300~360mm
500 160 5.0 2,490.00 4,850.00 253,980 494,700 630 850 23160KMBW33 H3160 130.000
500 160 5.0 2,490.00 4,850.00 253,980 494,700 630 850 23160MBW33 130.000
540 192 5.0 3,430.00 5,910.00 349,860 602,820 450 600 23260KMBW33 H2360 195.000
540 192 5.0 3,430.00 5,910.00 349,860 602,820 450 600 23260MBW33 195.000
300 460 160 4.0 2,430.00 5,160.00 247,860 526,320 560 750 24060K30MBW33 97.000
460 160 4.0 2,430.00 5,160.00 247,860 526,320 560 750 24060MBW33 97.000
500 200 5.0 3,213.00 6,011.00 327,726 613,122 430 560 24160K30MBW33 159.000
500 200 5.0 3,213.00 6,011.00 327,726 613,122 430 560 24160MBW33 159.000
580 150 5.0 3,050.00 4,900.00 311,100 499,800 560 750 22264KMBW33 H3164 181.000
580 150 5.0 3,050.00 4,900.00 311,100 499,800 560 750 22264MBW33 181.000
480 121 4.0 1,830.00 3,740.00 186,660 381,480 630 850 23064KMBW33 H3064 79.500
480 121 4.0 1,830.00 3,740.00 186,660 381,480 630 850 23064MBW33 79.500
540 176 5.0 3,200.00 6,000.00 326,400 612,000 670 900 23164KMBW33 H3164 165.000
540 176 5.0 3,200.00 6,000.00 326,400 612,000 600 800 23164MBW33 171.000
320 580 208 5.0 3,900.00 6,950.00 397,800 708,900 430 560 23264KMBW33 H3164 247.000
580 208 5.0 3,900.00 6,950.00 397,800 708,900 430 560 23264MBW33 247.000
480 160 4.0 2,480.00 5,100.00 252,960 520,200 530 700 24064K30MBW33 106.000
480 160 4.0 2,480.00 5,100.00 252,960 520,200 530 700 24064MBW33 106.000
540 218 5.0 3,800.00 7,350.00 387,600 749,700 400 530 24164K30MBW33 215.000
540 218 5.0 3,800.00 7,350.00 387,600 749,700 400 530 24164MBW33 215.000
520 133 5.0 2,360.00 4,550.00 240,720 464,100 600 800 23068KMBW33 H3064 108.000
520 133 5.0 2,360.00 4,550.00 240,720 464,100 600 800 23068MBW33 108.000
580 190 5.0 3,650.00 6,950.00 372,300 708,900 560 750 23168KMBW33 H3168 216.000
580 190 5.0 3,650.00 6,950.00 372,300 708,900 560 750 23168MBW33 216.000
620 224 6.0 4,500.00 8,150.00 459,000 831,300 450 600 23268KMBW33 H3268 305.000
340 620 224 6.0 4,500.00 8,150.00 459,000 831,300 450 600 23268MBW33 305.000
520 180 5.0 3,100.00 6,550.00 316,200 668,100 500 670 24068K30MBW33 143.000
520 180 5.0 3,100.00 6,550.00 316,200 668,100 500 670 24068MBW33 143.000
580 243 5.0 4,400.00 8,500.00 448,800 867,000 340 450 24168K30MBW33 283.000
580 243 5.0 4,400.00 8,500.00 448,800 867,000 340 450 24168MBW33 283.000
540 134 5.0 2,450.00 4,800.00 249,900 489,600 560 750 23072KMBW33 H3072 111.000
540 134 5.0 2,450.00 4,800.00 249,900 489,600 560 750 23072MBW33 111.000
360 600 192 5.0 3,800.00 7,350.00 387,600 749,700 530 700 23172KMBW33 H3172 228.000
600 192 5.0 3,800.00 7,350.00 387,600 749,700 530 700 23172MBW33 228.000
77
360~420mm
650 232 6.0 4,900.00 9,150.00 499,800 933,300 430 800 23272KMBW33 H3272 341.000
650 232 6.0 4,900.00 9,150.00 499,800 933,300 430 800 23272MBW33 341.000
540 180 5.0 3,250.00 6,800.00 331,500 693,600 480 630 24072K30MBW33 145.000
360 540 180 5.0 3,250.00 6,800.00 331,500 693,600 480 630 24072MBW33 145.000
600 243 5.0 4,500.00 9,000.00 459,000 918,000 360 480 24172K30MBW33 279.000
600 243 5.0 4,500.00 9,000.00 459,000 918,000 360 480 24172MBW33 279.000
560 135 5.0 2,550.00 5,300.00 260,100 540,600 530 700 23076KMBW33 H3076 117.000
560 135 5.0 2,550.00 5,300.00 260,100 540,600 530 700 23076MBW33 117.000
620 194 5.0 4,050.00 8,150.00 413,100 831,300 500 670 23176KMBW33 H3176 242.000
620 194 5.0 4,050.00 8,150.00 413,100 831,300 500 670 23176MBW33 242.000
680 240 6.0 5,300.00 9,800.00 540,600 999,600 360 480 23276KMBW33 H3276 390.000
380 680 240 6.0 5,300.00 9,800.00 540,600 999,600 360 480 23276MBW33 390.000
560 180 5.0 3,350.00 7,200.00 341,700 734,400 450 600 24076K30MBW33 152.000
560 180 5.0 3,350.00 7,200.00 341,700 734,400 450 600 24076MBW33 152.000
620 243 5.0 4,650.00 9,500.00 474,300 969,000 340 450 24176K30MBW33 300.000
620 243 5.0 4,650.00 9,500.00 474,300 969,000 340 450 24176MBW33 300.000
600 148 5.0 3,050.00 6,200.00 311,100 632,400 500 670 23080KMBW33 H3080 152.000
600 148 5.0 3,050.00 6,200.00 311,100 632,400 500 670 23080MBW33 152.000
650 200 6.0 4,250.00 8,500.00 433,500 867,000 480 630 23180KMBW33 H3180 270.000
650 200 6.0 4,250.00 8,500.00 433,500 867,000 480 630 23180MBW33 270.000
720 256 6.0 5,700.00 10,800.00 581,400 1,101,600 380 700 23280KMBW33 H3280 468.000
400 720 256 6.0 5,700.00 10,800.00 581,400 1,101,600 380 700 23280MBW33 468.000
600 200 5.0 3,900.00 8,500.00 397,800 867,000 430 560 24080K30MBW33 205.000
600 200 5.0 3,900.00 8,500.00 397,800 867,000 430 560 24080MBW33 205.000
650 250 6.0 5,100.00 10,400.00 520,200 1,060,800 320 430 24180K30MBW33 340.000
650 250 6.0 5,100.00 10,400.00 520,200 1,060,800 320 430 24180MBW33 340.000
620 150 5.0 3,150.00 6,550.00 321,300 668,100 500 670 23084KMBW33 H3084 160.000
620 150 5.0 3,150.00 6,550.00 321,300 668,100 500 670 23084MBW33 160.000
700 224 6.0 5,000.00 9,650.00 510,000 984,300 500 670 23184KMBW33 H3184 363.000
700 224 6.0 5,000.00 9,650.00 510,000 984,300 500 670 23184MBW33 363.000
420 760 272 7.5 6,550.00 12,200.00 668,100 1,244,400 320 430 23284KMBW33 H3284 553.000
760 272 7.5 6,550.00 12,200.00 668,100 1,244,400 320 430 23284MBW33 553.000
620 200 5.0 4,000.00 8,800.00 408,000 897,600 430 560 24084K30MBW33 210.000
620 200 5.0 4,000.00 8,800.00 408,000 897,600 430 560 24084MBW33 210.000
78
420~460mm
700 280 6.0 6,200.00 12,700.00 632,400 1,295,400 300 400 24184K30MBW33 445.000
420 700 280 6.0 6,200.00 12,700.00 632,400 1,295,400 300 400 24184MBW33 445.000
650 157 6.0 3,400.00 7,100.00 346,800 724,200 530 700 23088KMBW33 H3088 180.000
650 157 6.0 3,400.00 7,100.00 346,800 724,200 530 700 23088MBW33 180.000
720 226 6.0 5,200.00 10,400.00 530,400 1,060,800 500 670 23188KMBW33 H3188 360.000
720 226 6.0 5,200.00 10,400.00 530,400 1,060,800 500 670 23188MBW33 360.000
790 280 7.5 7,100.00 13,400.00 724,200 1,366,800 360 480 23288KMBW33 H3288 595.000
440 790 280 7.5 7,100.00 13,400.00 724,200 1,366,800 360 480 23288MBW33 595.000
650 212 6.0 4,300.00 9,650.00 438,600 984,300 400 530 24088K30MBW33 245.000
650 212 6.0 4,300.00 9,650.00 438,600 984,300 400 530 24088MBW33 245.000
720 280 6.0 6,400.00 13,200.00 652,800 1,346,400 300 400 24188K30MBW33 460.000
720 280 6.0 6,400.00 13,200.00 652,800 1,346,400 300 400 24188MBW33 460.000
680 163 6.0 3,650.00 7,650.00 372,300 780,300 450 600 23092KMBW33 H3092 209.000
680 163 6.0 3,650.00 7,650.00 372,300 780,300 450 600 23092MBW33 209.000
760 240 7.5 5,850.00 11,600.00 596,700 1,183,200 480 630 23192KMBW33 H3192 441.000
760 240 7.5 5,850.00 11,600.00 596,700 1,183,200 480 630 23192MBW33 441.000
830 296 7.5 7,800.00 15,000.00 795,600 1,530,000 340 450 23292KMBW33 H3292 695.000
460 830 296 7.5 7,800.00 15,000.00 795,600 1,530,000 340 450 23292MBW33 695.000
680 218 6.0 4,750.00 10,600.00 484,500 1,081,200 380 500 24092K30MBW33 280.000
680 218 6.0 4,750.00 10,600.00 484,500 1,081,200 380 500 24092MBW33 280.000
760 300 7.5 7,500.00 15,600.00 765,000 1,591,200 280 380 24192K30MBW33 560.000
760 300 7.5 7,500.00 15,600.00 765,000 1,591,200 280 380 24192MBW33 560.000
79
Adapters
B2
1:12
d1
G
d2
d
B1
17~55mm
Shaft
Dia
d d1 Dm B1 B2 G Sleeve Locknut Lockwasher
20 17 32 24 7 H204 M20x1 0.04 A204 KM4 MB4

17 20 17 32 28 7 H304 M20x1 0.05 A304 KM4 MB4
20 17 32 31 7 H2304 M20x1 0.05 A2304 KM4 MB4
25 20 38 26 9 H205 M25x1.5 0.07 A205 KM5 MB5

20 25 20 38 29 9 H305 M25x1.5 0.08 A305 KM5 MB5
25 20 38 35 9 H2305 M25x1.5 0.09 A2305 KM5 MB5
30 25 45 27 9 H206 M30x1.5 0.10 A206 KM6 MB6

25 30 25 45 31 9 H306 M30x1.5 0.11 A306 KM6 MB6
30 25 45 38 9 H2306 M30x1.5 0.13 A2306 KM6 MB6
35 30 52 29 10 H207 M35x1.5 0.13 A207 KM7 MB7

30 35 30 52 35 10 H307 M35x1.5 0.14 A307 KM7 MB7
35 30 52 43 10 H2307 M35x1.5 0.17 A2307 KM7 MB7
40 35 58 31 11 H208 M40x1.5 0.17 A208 KM8 MB8

35 40 35 58 36 11 H308 M40x1.5 0.19 A308 KM8 MB8
40 35 58 46 11 H2308 M40x1.5 0.22 A2308 KM8 MB8
45 40 65 33 12 H209 M45x1.5 0.23 A209 KM9 MB9

40 45 40 65 39 12 H309 M45x1.5 0.25 A309 KM9 MB9
45 40 65 50 12 H2309 M45x1.5 0.28 A2309 KM9 MB9
50 45 70 35 13 H210 M50x1.5 0.27 A210 KM10 MB10

45 50 45 70 42 13 H310 M50x1.5 0.30 A310 KM10 MB10
50 45 70 55 13 H2310 M50x1.5 0.36 A2310 KM10 MB10
55 50 75 37 13 H211 M55x2 0.31 A211 KM11 MB11

50 55 50 75 45 13 H311 M55x2 0.35 A311 KM11 MB11
55 50 75 59 13 H2311 M55x2 0.42 A2311 KM11 MB11
60 55 80 38 13 H212 M60x2 0.35 A212 KM12 MB12

55 60 55 80 47 13 H312 M60x2 0.39 A312 KM12 MB12
60 55 80 62 13 H2312 M60x2 0.48 A2312 KM12 MB12
80
Adapters
B2
1:12
d1
G
d2
d
B1
60~95mm
Shaft
Dia
65 60 85 40 14 H213 M65x2 0.40 A213 KM13 MB13

65 60 85 50 14 H313 M65x2 0.46 A313 KM13 MB13
65 60 85 65 14 H2313 M65x2 0.56 A2313 KM13 MB13
60 70 60 92 41 14 H214 M70x2 0.60 A214 KM14 MB14
70 60 92 52 14 H314 M70x2 0.72 A314 KM14 MB14
70 60 92 68 14 H2314 M70x2 0.90 A2314 KM14 MB14
75 65 98 43 15 H215 M75x2 0.71 A215 KM15 MB15

65 75 65 98 55 15 H315 M75x2 0.83 A315 KM15 MB15
75 65 98 73 15 H2315 M75x2 1.05 A2315 KM15 MB15
80 70 105 46 17 H216 M80x2 0.88 A216 KM16 MB16

70 80 70 105 59 17 H316 M80x2 1.00 A316 KM16 MB16
80 70 105 78 17 H2316 M80x2 1.28 A2316 KM16 MB16
85 75 110 50 18 H217 M85x2 1.02 A217 KM17 MB17

75 85 75 110 63 18 H317 M85x2 1.20 A317 KM17 MB17
85 75 110 82 18 H2317 M85x2 1.45 A2317 KM17 MB17
90 80 120 52 18 H218 M90x2 1.20 A218 KM18 MB18

80 90 80 120 65 18 H318 M90x2 1.35 A318 KM18 MB18
90 80 120 86 18 H2318 M90x2 1.69 A2318 KM18 MB18
95 85 125 55 19 H219 M95x2 1.35 A219 KM19 MB19

85 95 85 125 68 19 H319 M95x2 1.55 A319 KM19 MB19
95 85 125 90 19 H2319 M95x2 1.92 A2319 KM19 MB19
00
1 90 130 58 20 H220 M100x2 1.50 A220 KM20 MB20
100 90 130 71 20 H320 M100x2 1.70 A320 KM20 MB20
90 100 90 130 76 20 H3120 M100x2 1.80 A3120 KM20 MB20
100 90 130 97 20 H2320 M100x2 2.15 A2320 KM20 MB20
105 95 140 60 20 H221 M105x2 1.70 A221 KM21 MB21

95 105 95 140 74 20 H321 M105x2 1.95 A321 KM21 MB21
105 95 140 101 20 H2321 M105x2 2.46 A2321 KM21 MB21
81
Adapters
B2
1:12
d1
G
d2
d
B1
100~170mm
Shaft
Dia
110 100 145 63 21 H222 M110x2 1.90 A222 KM22 MB22

110 100 145 77 21 H322 M110x2 2.20 A322 KM22 MB22
100 110 100 145 81 21 H3122 M110x2 2.40 A3122 KM22 MB22
110 100 145 105 21 H2322 M110x2 2.75 A2322 KM22 MB22
120 110 145 72 22 H3024 M120x2 1.95 A3024 KML24 MBL24

110 120 110 155 88 22 H3124 M120x2 2.65 A3124 KM24 MB24
120 110 155 112 22 H2324 M120x2 3.20 A2324 KM24 MB24
130 115 155 80 23 H3026 M130x2 2.85 A3026 KML26 MBL26

115 130 115 165 92 23 H3126 M130x2 3.65 A3126 KM26 MB26
130 115 165 121 23 H2326 M130x2 4.60 A2326 KM26 MB26
140 125 165 82 24 H3028 M140x2 3.15 A3028 KML28 MBL28

125 140 125 180 97 24 H3128 M140x2 4.35 A3128 KM28 MB28
140 125 180 131 24 H2328 M140x2 5.55 A2328 KM28 MB28
150 135 180 87 26 H3030 M150x2 3.90 A3030 KML30 MBL30

135 150 135 195 111 26 H3130 M150x2 5.50 A3130 KM30 MB30
150 135 195 139 26 H2330 M150x2 6.63 A2330 KM30 MB30
160 140 190 93 28 H3032 M160x3 5.20 A3032 KML32 MBL32

140 160 140 210 119 28 H3132 M160x3 7.65 A3132 KM32 MB32
160 140 210 147 28 H2332 M160x3 9.15 A2332 KM32 MB32
170 150 200 101 29 H3034 M170x3 6.00 A3034 KML34 MBL34
150 170 150 220 122 29 H3134 M170x3 8.40 A3134 KM34 MB34
170 150 220 154 29 H2334 M170x3 10.20 A2334 KM34 MB34
180 160 210 109 30 H3036 M180x3 6.85 A3036 KML36 MBL36
180 180 160 230 131 30 H3136 M180x3 9.50 A3136 KM36 MB36
180 160 230 161 30 H2336 M180x3 11.30 A2336 KM36 MB36
190 170 220 112 31 H3038 M190x3 7.45 A3038 KML38 MBL38
170 190 170 240 141 31 H3138 M190x3 11.00 A3138 KM38 MB38
190 170 240 169 31 H2338 M190x3 12.60 A2338 KM38 MB38
82
Adapters
B2
1:12
d1
G
d2
d
B1
180~300mm
Shaft
Dia
200 180 240 120 32 H3040 M200x3 9.20 A3040 KML40 MBL40
180 200 180 250 150 32 H3140 M200x3 12.00 A3140 KM40 MB40
200 180 250 176 32 H2340 M200x3 14.00 A2340 KM40 MB40
220 200 260 126 40 H3044 Tr220x4 10.50 A3044 HM3044 MS3044
200 220 200 280 161 35 H3144 Tr220x4 15.00 A3144 HM44T MB44
220 200 280 186 35 H2344 Tr220x4 16.70 A2344 HM44T MB44
240 220 290 133 45 H3048 Tr240x4 13.00 A3048 HM3048 MS3048
220 240 220 300 172 37 H3148 Tr240x4 18.00 A3148 KM48T MB48
240 220 300 199 37 H2348 Tr240x4 29.70 A2348 KM48T MB49
260 240 310 145 45 H3052 Tr260x4 15.50 A3052 HM3052 MS3048
240 260 240 330 190 39 H3152 Tr260x4 22.50 A3152 KM52T MB52
260 240 330 211 39 H2352 Tr260x4 24.20 A2352 KM52T MB52
280 260 330 152 49 H3056 Tr280x4 17.50 A3056 HM3056 MS3056
260 280 260 350 195 41 H3156 Tr280x4 25.00 A3156 HM56T MB56
280 260 350 224 41 H2356 Tr280x4 27.80 A2356 HM56T MB56
300 280 360 168 53 H3060 Tr300x4 23.00 A3060 HM3060 MS3160
280 300 280 380 208 53 H3160 Tr300x4 30.00 A3160 HM3160 MS3160
320 300 380 171 56 H3064 Tr320x5 24.50 A3064 HM3064 MS3064
300 320 300 400 226 56 H3164 Tr320x5 35.00 A3164 HM3164 MS3164
83
Pillow Block Units
UCP 200
12~90mm
Shaff Dia Unit No. Bolt size Insert Housing
mm mm No. No.
H L J A N N1 H1 H2 B S
12 UCP 201 30.2 127 95 38 13 19 15 62 31.0 12.7 M 10 UC 201 P 203 0.65
15 UCP 202 30.2 127 95 38 13 19 15 62 31.0 12.7 M 10 UC 202 P 203 0.63
17 UCP 203 30.2 127 95 38 13 19 15 62 31.0 12.7 M 10 UC 203 P 203 0.62
20 UCP 204 33.3 127 95 38 13 19 15 65 31.0 12.7 M 10 UC 204 P 204 0.65
25 UCP 205 36.5 140 105 38 13 16 16 70 34.1 14.3 M 10 UC 205 P 205 0.79
30 UCP 206 42.9 165 121 48 17 21 18 83 38.1 15.9 M 14 UC 206 P 206 1.26
35 UCP 207 47.6 167 127 48 17 21 19 94 42.9 17.5 M 14 UC 207 P 207 1.59
40 UCP 208 49.2 184 137 54 17 25 19 100 49.2 19.0 M 14 UC 208 P 208 1.92
45 UCP 209 54.0 190 146 54 17 22 20 108 49.2 19.0 M 14 UC 209 P 209 2.19
50 UCP 210 57.2 206 159 60 20 25 22 114 51.6 19.0 M 16 UC 210 P 210 2.59
55 UCP 211 63.5 219 171 60 20 25 22 126 55.6 22.2 M 16 UC 211 P 211 3.30
60 UCP 212 69.8 241 184 70 20 25 25 138 65.1 25.4 M 16 UC 212 P 212 4.70
65 UCP 213 76.2 265 203 70 25 29 27 150 65.1 25.4 M 20 UC 213 P 213 5.60
70 UCP 214 79.4 266 210 72 25 31 27 156 74.6 30.2 M 20 UC 214 P 214 7.30
75 UCP 215 82.6 275 217 74 25 31 28 163 77.8 33.3 M 20 UC 215 P 215 7.90
80 UCP 216 88.9 292 232 78 25 31 30 175 82.6 33.3 M 20 UC 216 P 216 10.00
85 UCP 217 95.2 310 247 83 25 31 32 187 85.7 34.1 M 20 UC 217 P 217 12.20
90 UCP 218 101.6 327 262 88 27 33 34 200 96.0 39.7 M 22 UC 218 P 218 14.70
UCF 200
12~90mm
mm mm No. No.
L J A2 A1 A N A0 B S
12 UCF 201 86 64 15 12 25.5 12 33.3 31.0 12.7 M 10 UC 201 F 204 0.63
15 UCF 202 86 64 15 12 25.5 12 33.3 31.0 12.7 M 10 UC 202 F 204 0.61
17 UCF 203 86 64 15 12 25.5 12 33.3 31.0 12.7 M 10 UC 203 F 204 0.60
20 UCF 204 86 64 15 12 25.5 12 33.3 31.0 12.7 M 10 UC 204 F 204 0.58
25 UCF 205 95 70 16 14 27.0 12 35.8 34.1 14.3 M 10 UC 205 F 205 0.72
30 UCF 206 108 83 18 14 31.0 12 40.2 38.1 15.9 M 10 UC 206 F 206 1.01
35 UCF 207 117 92 19 16 34.0 14 44.4 42.9 17.5 M 12 UC 207 F 207 1.38
40 UCF 208 130 102 21 16 36.0 16 51.2 49.2 19.0 M 14 UC 208 F 208 1.77
45 UCF 209 137 105 22 18 38.0 16 52.2 49.2 19.0 M 14 UC 209 F 209 2.07
50 UCF 210 143 111 22 18 40.0 16 54.6 51.6 19.0 M 14 UC 210 F 210 2.36
55 UCF 211 162 130 25 20 43.0 19 58.4 55.6 22.2 M 16 UC 211 F 211 3.40
60 UCF 212 175 143 29 20 48.0 19 68.7 65.1 25.4 M 16 UC 212 F 212 4.02
65 UCF 213 187 149 30 20 50.0 19 69.7 65.1 25.4 M 16 UC 213 F 213 4.98
70 UCF 214 193 152 31 24 54.0 19 75.4 74.6 30.2 M 16 UC 214 F 214 5.56
75 UCF 215 200 159 34 24 56.0 19 78.5 77.8 33.3 M 16 UC 215 F 215 6.22
80 UCF 216 208 165 34 24 58.0 23 83.3 82.6 33.3 M 20 UC 216 F 216 7.48
85 UCF 217 220 175 36 26 63.0 23 87.6 85.7 34.1 M 20 UC 217 F 217 8.77
90 UCF 218 235 187 40 26 68.0 23 96.3 96.0 39.7 M 20 UC 218 F 218 10.74
84
Pillow Block Units
UCFC 200
12~90mm
mm No. No. No.
H J J1 A2 N A3 A1 A H3 A0 B S
12 UCFC 201 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M 10 UC 201 FC 204 0.89
15 UCFC 202 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M 10 UC 202 FC 204 0.87
17 UCFC 203 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M 10 UC 203 FC 204 0.86
20 UCFC 204 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M 10 UC 204 FC 204 0.84
25 UCFC 205 115 90 63.6 10 12 6 7 21.0 70 29.8 34.1 14.3 M 10 UC 205 FC 205 0.97
30 UCFC 206 125 100 70.7 10 12 8 8 23.0 80 32.2 38.1 15.9 M 10 UC 206 FC 206 1.18
35 UCFC 207 135 110 77.8 11 14 8 9 26.0 90 36.4 42.9 17.5 M 12 UC 207 FC 207 1.55
40 UCFC 208 145 120 84.8 11 14 10 9 26.0 100 41.2 49.2 19.0 M 12 UC 208 FC 208 1.85
45 UCFC 209 160 132 93.3 10 16 12 14 26.0 105 40.2 49.2 19.0 M 14 UC 209 FC 209 2.42
50 UCFC 210 165 138 97.6 10 16 12 14 28.0 110 42.6 51.6 19.0 M 14 UC 210 FC 210 2.71
55 UCFC 211 185 150 106.1 13 19 12 15 31.0 125 46.4 55.6 22.2 M 16 UC 211 FC 211 3.90
60 UCFC 212 195 160 113.1 17 19 12 15 36.0 135 56.7 65.1 25.4 M 16 UC 212 FC212 4.55
65 UCFC 213 205 170 120.2 16 19 14 15 36.0 145 55.7 65.1 25.4 M 16 UC 213 FC 213 5.11
70 UCFC 214 215 177 125.1 17 19 14 18 40.0 150 61.4 74.6 30.2 M 16 UC 214 FC 214 6.40
75 UCFC 215 220 184 130.1 18 19 16 18 40.0 160 62.5 77.8 33.3 M 16 UC 215 FC 215 6.92
80 UCFC 216 240 200 141.4 18 23 16 18 42.0 170 67.3 82.6 33.3 M 20 UC 216 FC 216 8.60
85 UCFC 217 250 208 147.1 18 23 18 20 45.0 180 69.6 85.7 34.1 M 20 UC 217 FC 217 9.83
90 UCFC 218 265 220 155.5 22 23 18 20 50.0 190 78.3 96.0 39.7 M 20 UC 218 FC 218 12.24
UCFL 200
12~90mm
mm mm No. No.
H J A2 A1 A N L A0 B S
12 UCFL 201 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M 10 UC 201 FL 204 0.47
15 UCFL 202 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M 10 UC 202 FL 204 0.45
17 UCFL 203 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M 10 UC 203 FL 204 0.44
20 UCFL 204 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M 10 UC 204 FL 204 0.42
25 UCFL 205 130 99 16 14 27.0 16 68 35.8 34.1 14.3 M 14 UC 205 FL 205 0.59
30 UCFL 206 148 117 18 14 31.0 16 80 40.2 38.1 15.9 M 14 UC 206 FL 206 0.90
35 UCFL 207 161 130 19 16 34.0 16 90 44.4 42.9 17.5 M 14 UC 207 FL 207 1.20
40 UCFL 208 175 144 21 16 36.0 16 100 51.2 49.2 19.0 M 14 UC 208 FL 208 1.51
45 UCFL 209 188 148 22 18 38.0 19 108 52.2 49.2 19.0 M 16 UC 209 FL 209 1.90
50 UCFL 210 197 157 22 18 40.0 19 115 54.6 51.6 19.0 M 16 UC 210 FL 210 2.20
55 UCFL 211 224 184 25 20 43.0 19 130 58.4 55.6 22.2 M 16 UC 211 FL 211 3.20
60 UCFL 212 250 202 29 20 48.0 23 140 68.7 65.1 25.4 M 20 UC 212 FL 212 4.10
65 UCFL 213 258 210 30 24 50.0 23 155 69.7 65.1 25.4 M 20 UC 213 FL 213 5.10
70 UCFL 214 265 216 31 24 54.0 23 160 75.4 74.6 30.2 M 20 UC 214 FL 214 6.00
75 UCFL 215 275 225 34 24 56.0 23 165 78.5 77.8 33.3 M 20 UC 215 FL 215 6.50
80 UCFL 216 290 233 34 24 58.0 25 180 83.3 82.6 33.3 M 22 UC 216 FL 216 8.00
85 UCFL 217 305 248 36 26 63.0 25 190 87.6 85.7 34.1 M 22 UC 217 FL 217 9.50
90 UCFL 218 320 265 40 26 68.0 25 205 96.3 96.0 39.7 M 22 UC 218 FL 218 11.90
85
Pillow Block Units
UCT 200
12~85mm
Shaff Dia Unit No. Insert Housing
mm No. No.
N L2 H2 N2 N L3 A1 H1 H L A A2 L1 B S
12 UCT 201 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 UC 201 T 204 0.79
15 UCT 202 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 UC 202 T 204 0.77
17 UCT 203 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 UC 203 T 204 0.76
20 UCT 204 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 UC 204 T 204 0.74
25 UCT 205 16 10 51 32 19 51 12 76 89 97 32 24 62 34.1 14.3 UC 205 T 205 0.82
30 UCT 206 16 10 56 37 22 57 12 89 102 113 37 28 70 38.1 15.9 UC 206 T 206 1.30
35 UCT 207 16 13 64 37 22 64 12 89 102 129 37 30 78 42.9 17.5 UC 207 T 207 1.60
40 UCT 208 19 16 83 49 29 83 16 102 114 144 49 33 88 49.2 19.0 UC 208 T 208 2.40
45 UCT 209 19 16 83 49 29 83 16 102 117 144 49 35 87 49.2 19.0 UC 209 T 209 2.40
50 UCT 210 19 16 83 49 29 86 16 102 117 149 49 37 90 51.6 19.0 UC 210 T 210 2.50
55 UCT 211 25 19 102 64 35 95 22 130 146 171 64 38 106 55.6 22.2 UC 211 T 211 4.00
60 UCT 212 32 19 102 64 35 102 22 130 146 194 64 42 119 65.1 25.4 UC 212 T 212 5.10
65 UCT 213 32 21 111 70 41 121 26 151 167 224 70 44 137 65.1 25.4 UC 213 T 213 7.00
70 UCT 214 32 21 111 70 41 121 26 151 167 224 70 46 137 74.6 30.2 UC 214 T 214 7.10
75 UCT 215 32 21 111 70 41 121 26 151 167 232 70 48 140 77.8 33.3 UC 215 T 215 7.50
80 UCT 216 32 21 111 70 41 121 26 165 184 235 70 51 140 82.6 33.3 UC 216 T 216 8.50
85 UCT 217 38 29 124 73 48 157 30 173 198 260 73 54 162 85.7 34.1 UC 217 T 217 11.20
Insert Ball Bearings G

UC 200
Metric series
12~90mm
d D B C r S S1 G ds Ca d4 Cr Cor Cr Cor
C201
U 12 47 31.0 17 1.0 12.7 18.3 4.5 M6X0.75 4.5 29.0 12.8 6.6 1,300 670 0.21
UC202 15 47 31.0 17 1.0 12.7 18.3 4.5 M6X0.75 4.5 29.0 12.8 6.6 1,300 670 0.19
UC203 17 47 31.0 17 1.0 12.7 18.3 4.5 M6X0.75 4.5 29.0 12.8 6.6 1,300 670 0.18
UC204 20 47 31.0 17 1.5 12.7 18.3 4.5 M6X0.75 4.5 29.0 12.8 6.6 1,300 670 0.16
UC205 25 52 34.1 17 1.5 14.3 19.8 5.0 M6X0.75 4.5 34.0 14.0 7.9 1,420 800 0.19
UC206 30 62 38.1 19 1.5 15.9 22.2 5.0 M6X0.75 5.1 40.5 19.6 11.3 2,000 1,150 0.31
UC207 35 72 42.9 20 2.0 17.5 25.4 6.0 M8X1 5.8 48.0 25.9 15.4 2,640 1,550 0.48
UC208 40 80 49.2 21 2.0 19.0 30.2 8.0 M8X1 6.2 53.0 29.3 17.9 2,980 1,820 0.62
UC209 45 85 49.2 22 2.0 19.0 30.2 8.0 M8X1 6.5 57.3 33.0 20.5 3,350 2,090 0.67
UC210 50 90 51.6 23 2.0 19.0 32.6 9.0 M10X1.25 6.5 63.0 35.5 23.2 3,600 2,360 0.78
UC211 55 100 55.6 24 2.5 22.2 33.4 9.0 M10X1.25 7.3 70.0 43.0 29.4 4,350 3,000 1.03
UC212 60 110 65.1 26 2.5 25.4 39.7 10.0 M10X1.25 7.7 77.0 52.5 36.1 5,350 3,680 1.45
UC213 65 120 65.1 27 2.5 25.4 39.7 10.0 M10X1.25 8.3 82.1 57.5 40.0 5,850 4,080 1.71
UC214 70 125 74.6 29 2.5 30.2 44.4 12.0 M12X1.5 8.7 87.0 62.0 44.0 6,300 4,480 2.06
UC215 75 130 77.8 30 2.5 33.3 44.5 14.0 M12X1.5 9.2 91.5 66.0 48.2 6,700 4,910 2.22
UC216 80 140 82.6 32 3.0 33.3 49.3 14.0 M12X1.5 9.6 98.5 72.5 53.0 7,400 5,400 2.82
UC217 85 150 85.7 34 3.0 34.1 51.6 14.0 M12X1.5 10.5 105.0 83.5 61.8 8,500 6,300 3.38
UC218 90 160 96.0 36 3.0 39.7 56.3 15.0 M12X1.5 11.1 111.5 95.5 71.4 9,750 7,280 4.34
86
Insert Ball Bearings
UC 200
Inch series G
1
/2~3 1/2inch
Shaft dia
inch
d D B C r S S1 G ds(UNF) Ca d4 Cr Cor Cr Cor
UC202-8 /
1 2
1.8504 1.2200 0.6690 0.0390 0.5000 0.7200 0.1770 / -28
1 4
0.1770 1.1420 12.8 6.6 1,300 670 0.21
UC202-10 /
5 8
1.8504 1.2200 0.6690 0.0390 0.5000 0.7200 0.1770 / -28
1 4
0.1770 1.1420 12.8 6.6 1,300 670 0.19
UC203-11 /
11 16
1.8504 1.2200 0.6690 0.0390 0.0500 0.7200 0.1770 / -28
1 4
0.1770 1.1420 12.8 6.6 1,300 670 0.18
UC204-12 /
3 4
1.8504 1.2200 0.6690 0.0590 0.5000 0.7200 0.1770 / -28
1 4
0.1770 1.1420 12.8 6.6 1,300 670 0.16
UC205-14 /
7 8
2.0472 1.3420 0.6690 0.0590 0.5630 0.7800 0.1970 / -28
1 4
0.1770 1.3390 14.0 7.9 1,420 800 0.19
UC205-16 1 2.0472 1.3420 0.6690 0.0590 0.5630 0.7800 0.1970 / -28
1 4
0.1770 1.3390 14.0 7.9 1,420 800 0.19
UC206-18 1 1/8 2.4409 1.5000 0.7480 0.0590 0.6260 0.8740 0.1970 / -28
1 4
0.2010 1.5940 19.6 11.3 2,000 1,150 0.31
UC206-19 1 3/16 2.4409 1.5000 0.7480 0.0590 0.6260 0.8740 0.1970 / -28
1 4
0.2010 1.5940 19.6 11.3 2,000 1,150 0.31
UC207-20 1 1/4 2.8346 1.6890 0.7870 0.0790 0.6890 1.0000 0.2360 / -24
5 16
0.2280 1.8900 25.9 15.4 2,640 1,550 0.48
UC207-21 1 5/16 2.8346 1.6890 0.7870 0.0790 0.6890 1.0000 0.2360 / -24
5 16
0.2280 1.8900 25.9 15.4 2,640 1,550 0.48
UC207-22 1 3/8 2.8346 1.6890 0.7870 0.0790 0.6890 1.0000 0.2360 / -24
5 16
0.2280 1.8900 25.9 15.4 2,640 1,550 0.48
UC207-23 1 7/16 2.8346 1.6890 0.7870 0.0790 0.6890 1.0000 0.2360 / -24
5 16
0.2280 1.8900 25.9 15.4 2,640 1,550 0.48
UC208-24 1 1/2 3.1496 1.9370 0.8270 0.0790 0.7480 1.1890 0.3150 / -24
5 16
0.2440 2.0870 29.3 17.9 2,980 1,820 0.62
UC209-26 1 5/8 3.3465 1.9370 0.8660 0.0790 0.7480 1.1890 0.3150 / -24
5 16
0.2560 2.2560 33.0 20.5 3,350 2,090 0.67
UC209-27 1 11/16 3.3465 1.9370 0.8660 0.0790 0.7480 1.1890 0.3150 / -24
5 16
0.2560 2.2560 33.0 20.5 3,350 2,090 0.67
UC209-28 1 3/4 3.3465 1.9370 0.8660 0.0790 0.7480 1.1890 0.3150 / -24
5 16
0.2560 2.2560 33.0 20.5 3,350 2,090 0.67
UC210-30 1 7/8 3.5433 2.0310 0.9060 0.0790 0.7480 1.2830 0.3540 / -24
3 8
0.2560 2.4800 35.5 23.2 3,600 2,360 0.78
UC210-31 1 15/16 3.5433 2.0310 0.9060 0.0790 0.7480 1.2830 0.3540 / -24
3 8
0.2560 2.4800 35.5 23.2 3,600 2,360 0.78
UC211-32 2 3.9370 2.1890 0.9450 0.0980 0.8740 1.3150 0.3540 / -24
3 8
0.2870 2.7560 43.0 29.4 4,350 3,000 1.03
UC211-35 2 3/16 3.9370 2.1890 0.9450 0.0980 0.8740 1.3150 0.3540 / -24
3 8
0.2870 2.7560 43.0 29.4 4,350 3,000 1.03
UC212-36 2 1/4 4.3307 2.5630 1.0240 0.0980 1.0000 1.5630 0.3940 / -24
3 8
0.3030 3.0310 52.5 36.1 5,350 3,680 1.45
UC212-38 2 3/8 4.3307 2.5630 1.0240 0.0980 1.0000 1.5630 0.3940 / -24
3 8
0.3030 3.0310 52.5 36.1 5,350 3,680 1.45
UC212-39 2 7/16 4.3307 2.5630 1.0240 0.0980 1.0000 1.5630 0.3940 / -24
3 8
0.3030 3.0310 52.5 36.1 5,350 3,680 1.45
UC213-40 2 1/2 4.7244 2.5630 1.0630 0.0980 1.0000 1.5630 0.3940 / -24
3 8
0.3270 3.2320 57.5 40.0 5,850 4,080 1.71
UC214-44 2 3/4 4.9213 2.9370 1.1420 0.0980 1.1890 1.7480 0.4720 / -20
7 16
0.3430 3.4250 62.0 44.0 6,300 4,480 2.06
UC215-48 3 5.1181 3.0630 1.1810 0.0980 1.3110 1.7520 0.5510 / -20
7 16
0.3620 3.6020 66.0 48.2 6,700 4,910 2.22
UC216-50 3 1/8 5.5118 3.2520 1.2600 0.1180 1.3110 1.9410 0.5510 / -20
7 16
0.3780 3.8780 72.5 53.0 7,400 5,400 2.82
UC217-52 3 1/4 5.9055 3.3740 1.3390 0.1180 1.3430 2.0310 0.5510 / -20
7 16
0.4130 4.1340 83.5 61.8 8,500 6,300 3.38
UC218-56 3 1/2 6.2992 3.7800 1.4170 0.1180 1.5630 2.2170 0.5910 / -20
1 2
0.4370 4.3900 95.5 71.4 9,750 7,280 4.34
87
SA 200
Bi
G ds
Metric Series
n m
B1
D d k
12~60mm Be
Bearing Shaff Dia Set Screw Dia

No mm mm
d Be D B1 n m Bi K H G h ds
SA 201 12 12 40 19.1 6.0 13.1 28.6 28.6 13.5 5.0 3.6 M6X1.0
SA 202 15 12 40 19.1 6.0 13.1 28.6 28.6 13.5 5.0 3.6 M6X1.0
SA 203 17 12 40 19.1 6.0 13.1 28.6 28.6 13.5 5.0 3.6 M6X1.0
SA 204 20 14 47 21.5 7.0 14.5 31.0 33.3 13.5 5.0 3.9 M6X1.0
SA 205 25 15 52 21.5 7.5 14.0 31.0 38.1 13.5 5.0 3.9 M6X1.0
SA 206 30 16 62 23.8 8.0 15.8 35.7 44.5 15.9 6.0 5.0 M8X1.0
SA 207 35 17 72 25.4 8.5 16.9 38.9 55.6 17.5 6.5 5.5 M8X1.0
SA 208 40 18 80 30.2 9.0 21.2 43.7 60.3 18.3 6.5 6.0 M8X1.0
SA 209 45 19 85 30.2 9.5 20.7 43.7 63.5 18.3 6.5 6.3 M8X1.0
SA 210 50 20 90 30.2 10.0 20.2 43.7 69.9 18.3 6.5 6.5 M8X1.0
SA 211 55 24 100 32.4 12.0 20.4 48.4 76.2 20.7 8.0 7.2 M10X1.0
SA 212 60 24 110 33.4 12.0 21.4 53.1 84.2 22.3 8.0 8.0 M10X1.0
SA 200
Inch Series
1
/2~2 7/16inch
No Inch inch
d Be D B1 n m Bi K H G h ds
SA 201-8 1
/2 0.4724 1.5748 0.7520 0.2362 0.5157 1.1260 1.1260 0.5315 0.1968 0.1417 1
/4-28UNF
SA 202-10 5
/8 0.4724 1.5748 0.7520 0.2362 0.5157 1.1260 1.1260 0.5315 0.1968 0.1417 1
/4-28UNF
SA 203-11 11
/6 0.4724 1.5748 0.7520 0.2362 0.5157 1.1260 1.1260 0.5315 0.1968 0.1417 1
/4-28UNF
SA 204-12 3
/4 0.5512 1.8504 0.8465 0.2756 0.5708 1.2205 1.3110 0.5315 0.1968 0.1535 1
/4-28UNF
SA 205-14 7
/8 0.5906 2.0472 0.8465 0.2953 0.5511 1.2205 1.5000 0.5315 0.1968 0.1535 1
/4-28UNF
SA 205-16 1 0.5906 2.0472 0.8465 0.2953 0.5511 1.2205 1.5000 0.5315 0.1968 0.1535 1
/4-28UNF
SA 206-18 11/8 0.6299 2.4409 0.9370 0.3150 0.6220 1.4055 1.7520 0.6260 0.2362 0.1969 5
/16-24UNF
SA 206-19 13/16 0.6299 2.4409 0.9370 0.3150 0.6220 1.4055 1.7520 0.6260 0.2362 0.1969 5
/16-24UNF
SA 206-20 11/4 0.6299 2.4409 0.9370 0.3150 0.6220 1.4055 1.7520 0.6260 0.2362 0.1969 5
/16-24UNF
SA 207-20 11/4 0.6693 2.8346 1.0000 0.3346 0.6653 1.5315 2.1890 0.6890 0.2559 0.2165 5
/16-24UNF
SA 207-22 13/8 0.6693 2.8346 1.0000 0.3346 0.6653 1.5315 2.1890 0.6890 0.2559 0.2165 5
/16-24UNF
SA 207-23 17/16 0.6693 2.8346 1.0000 0.3346 0.6653 1.5315 2.1890 0.6890 0.2559 0.2165 5
/16-24UNF
SA 208-24 11/2 0.7087 3.1496 1.1890 0.3540 0.8346 1.7205 2.3740 0.7205 0.2559 0.2362 5
/16-24UNF
SA 208-25 19/16 0.7087 3.1496 1.1890 0.3540 0.8346 1.7205 2.3740 0.7205 0.2559 0.2362 5
/16-24UNF
SA 209-26 15/8 0.7480 3.3465 1.1890 0.3540 0.8150 1.7205 2.5000 0.7205 0.2559 0.2480 5
/16-24UNF
SA 209-27 111/16 0.7480 3.3465 1.1890 0.3540 0.8150 1.7205 2.5000 0.7205 0.2559 0.2480 5
/16-24UNF
SA 209-28 13/4 0.7480 3.3465 1.1890 0.3540 0.8150 1.7205 2.5000 0.7205 0.2559 0.2480 5
/16-24UNF
SA 210-30 17/8 0.7874 3.5433 1.1890 0.3937 0.7954 1.7205 2.7520 0.7205 0.2559 0.2559 5
/16-24UNF
SA 210-31 115/16 0.7874 3.5433 1.1890 0.3937 0.7954 1.7205 2.7520 0.7205 0.2559 0.2559 5
/16-24UNF
SA 211-32 2 0.9449 3.9370 1.2756 0.4724 0.8032 1.9055 3.0000 0.8150 0.3150 0.2835 3
/8-24UNF
SA 211-34 21/8 0.9449 3.9370 1.2756 0.4724 0.8032 1.9055 3.0000 0.8150 0.3150 0.2835 3
/8-24UNF
SA 211-35 23/16 0.9449 3.9370 1.2756 0.4724 0.8032 1.9055 3.0000 0.8150 0.3150 0.2835 3
/8-24UNF
SA 212-36 21/4 0.9449 4.3307 1.3150 0.4724 0.8426 2.0905 3.3150 0.8780 0.3150 0.3150 3
/8-24UNF
SA 212-38 23/8 0.9449 4.3307 1.3150 0.4724 0.8426 2.0905 3.3150 0.8780 0.3150 0.3150 3
/8-24UNF
SA 212-39 27/16 0.9449 4.3307 1.3150 0.4724 0.8426 2.0905 3.3150 0.8780 0.3150 0.3150 3
/8-24UNF
88
Cr Cor Cr Cor
9.4 4.7 960 480 0.130
9.4 4.7 960 480 0.130
9.4 4.7 960 480 0.130
9.8 6.2 1,000 630 0.150
10.8 7.0 1,100 710 0.220
14.9 10.0 1,520 1,020 0.300
19.7 13.6 2,010 1,390 0.500
25.1 17.7 2,560 1,810 0.670
32.4 20.6 3,300 2,100 0.730
34.3 22.5 3,500 2,300 0.830
43.1 29.4 4,400 3,000 0.870
47.5 29.0 4,850 2,960 1.300
Cr Cor Cr Cor
9.4 4.7 960 480 0.130
9.4 4.7 960 480 0.130
9.4 4.7 960 480 0.130
9.8 6.2 1,000 630 0.150
10.8 7.0 1,100 710 0.220
10.8 7.0 1,100 710 0.220
14.9 10.0 1,520 1,020 0.300
14.9 10.0 1,520 1,020 0.300
14.9 10.0 1,520 1,020 0.300
19.7 13.6 2,010 1,390 0.500
19.7 13.6 2,010 1,390 0.500
19.7 13.6 2,010 1,390 0.500
25.1 17.7 2,560 1,810 0.670
25.1 17.7 2,560 1,810 0.670
32.4 20.6 3,300 2,100 0.730
32.4 20.6 3,300 2,100 0.730
32.4 20.6 3,300 2,100 0.730
34.3 22.5 3,500 2,300 0.830
34.3 22.5 3,500 2,300 0.830
43.1 29.4 4,400 3,000 0.870
43.1 29.4 4,400 3,000 0.870
43.1 29.4 4,400 3,000 0.870
47.5 29.0 4,850 2,960 1.300
47.5 29.0 4,850 2,960 1.300
47.5 29.0 4,850 2,960 1.300
89
Be
SB 200 G
2 -ds
Metric Series
D d
n m
12~60mm Bi

No mm mm
d Be D Bi n m G h ds
SB 201 12 12 40 22.0 6.0 16.0 4.5 3.6 M5X0.8
SB 202 15 12 40 22.0 6.0 16.0 4.5 3.6 M5X0.8
SB 203 17 12 40 22.0 6.0 16.0 4.5 3.6 M5X0.8
SB 204 20 14 47 25.0 7.0 18.0 4.5 3.9 M6X1.0
SB 205 25 15 52 27.0 7.5 19.5 5.5 3.9 M6X1.0
SB 206 30 16 62 30.0 8.0 22.0 5.5 5.0 M6X1.0
SB 207 35 17 72 32.0 8.5 23.5 6.5 5.5 M8X1.0
SB 208 40 18 80 34.0 9.0 25.0 7.0 6.0 M8X1.0
SB 209 45 19 85 41.2 9.5 31.7 8.2 6.3 M8X1.0
SB 210 50 20 90 41.6 10.0 31.6 9.2 6.5 M8X1.0
SB 211 55 23 100 45.3 11.8 33.5 9.8 7.2 M8X1.0
SB 212 60 24 110 53.7 14.9 38.8 9.8 8.0 M10X1.25
SB 200
Inch Series
1
/2~2 1/4inch
No Inch inch
d Be D Bi n m G h ds
SB 201-8 /2
1
0.4724 1.5748 0.8661 0.2362 0.6299 0.1772 0.1417 10-32UNF
SB 202-10 /8
5
0.4724 1.5748 0.8661 0.2362 0.6299 0.1772 0.1417 10-32UNF
SB 203-11 11
/16 0.4724 1.5748 0.8661 0.2362 0.6299 0.1772 0.1417 10-32UNF
SB 204-12 3
/4 0.5512 1.8504 0.9843 0.2756 0.7087 0.1772 0.1535 1
/4-28UNF
SB 205-14 7
/8 0.5906 2.0472 1.0630 0.2953 0.7677 0.2165 0.1535 1
/4-28UNF
SB 205-16 1 0.5906 2.0472 1.0630 0.2953 0.7677 0.2165 0.1535 1
/4-28UNF
SB 206-18 15/8 0.6299 2.4409 1.1811 0.3150 0.8661 0.2165 0.1969 1
/4-28UNF
SB 206-19 13/16 0.6299 2.4409 1.1811 0.3150 0.8661 0.2165 0.1969 1
/4-28UNF
SB 206-20 11/4 0.6299 2.4409 1.1811 0.3150 0.8661 0.2165 0.1969 1
/4-28UNF
SB 207-20 11/4 0.6693 2.8346 1.2598 0.3346 0.9252 0.2559 0.2165 5
/16-24UNF
SB 207-22 13/8 0.6693 2.8346 1.2598 0.3346 0.9252 0.2559 0.2165 5
/16-24UNF
SB 207-23 17/16 0.6693 2.8346 1.2598 0.3346 0.9252 0.2559 0.2165 5
/16-24UNF
SB 208-24 11/2 0.7087 3.1496 1.3386 0.3543 0.9843 0.2756 0.2362 5
/16-24UNF
SB 209-26 15/8 0.7480 3.3465 1.6220 0.3740 1.2480 0.3228 0.2480 5
/16-24UNF
SB 209-27 111/16 0.7480 3.3465 1.6220 0.3740 1.2480 0.3228 0.2480 5
/16-24UNF
SB 209-28 13/4 0.7480 3.3465 1.6220 0.3740 1.2480 0.3228 0.2480 5
/16-24UNF
SB 210-30 17/8 0.7874 3.5433 1.6378 0.3937 1.2441 0.3622 0.2559 5
/16-24UNF
SB 210-31 115/16 0.7874 3.5433 1.6378 0.3937 1.2441 0.3622 0.2559 5
/16-24UNF
SB211-32 2 0.9055 3.9370 1.7835 0.4646 1.3189 0.3858 0.2835 5
/16-24UNF
SB 211-34 21/8 0.9055 3.9370 1.7835 0.4646 1.3189 0.3858 0.2835 5
/16-24UNF
SB 211-35 23/16 0.9055 3.9370 1.7835 0.4646 1.3189 0.3858 0.2835 5
/16-24UNF
SB 212-36 21/4 0.9449 4.3307 2.1142 0.5866 1.5276 0.3858 0.315 3
/8-24UNF
90
Cr Cor Cr Cor
7.5 4.4 760 450 0.100
7.5 4.4 760 450 0.100
7.5 4.4 760 450 0.100
9.8 6.2 1000 630 0.150
10.8 7.0 1100 710 0.180
14.9 10.0 1520 1020 0.270
19.7 13.3 2010 1360 0.420
25.1 17.7 2560 1810 0.600
32.0 24.0 3260 2450 0.800
35.1 22.5 3580 2300 0.830
43.1 29.0 4400 2960 1.100
47.5 32.4 4850 3300 1.300
Cr Cor Cr Cor
7.5 4.4 760 450 0.100
7.5 4.4 760 450 0.100
7.5 4.4 760 450 0.100
9.8 6.2 1000 630 0.150
10.8 7.0 1100 710 0.180
10.8 7.0 1100 710 0.180
14.9 10.0 1520 1020 0.270
14.9 10.0 1520 1020 0.270
14.9 10.0 1520 1020 0.270
19.7 13.3 2010 1360 0.420
19.7 13.3 2010 1360 0.420
19.7 13.3 2010 1360 0.420
25.1 17.7 2560 1810 0.600
32.0 24.0 3260 2450 0.800
32.0 24.0 3260 2450 0.800
32.0 24.0 3260 2450 0.800
35.1 22.5 3580 2300 0.830
35.1 22.5 3580 2300 0.830
43.1 29.0 4400 2960 1.100
43.1 29.0 4400 2960 1.100
43.1 29.0 4400 2960 1.100
47.5 32.4 4850 3300 1.300
91
Plummer Blocks
20~65mm
Bolt Bolt Housing
size size No.
d1 D H J L A A1 H1 H2 N N1 g t S
52 40 130 165 67 46 22 75 15 20 25 M8 M12 SN505 1.20

20
62 50 150 185 80 52 22 90 15 20 34 M8 M12 SN605 1.80
62 50 150 185 77 52 22 90 15 20 30 M8 M12 SN506 1.90

25
72 50 150 185 82 52 22 95 15 20 37 M10 M12 SN606 2.10
72 50 150 185 82 52 22 95 15 20 33 M10 M12 SN507 2.30
30
80 60 170 205 90 60 25 110 15 20 41 M10 M12 SN607 2.60
80 60 170 205 85 60 25 110 15 20 33 M10 M12 SN508 2.40

35
90 60 170 205 95 60 25 115 15 20 43 M10 M12 SN608 2.80
85 60 170 205 85 60 25 112 15 20 31 M10 M12 SN509 2.70

40
100 70 210 255 105 70 28 130 18 23 46 M12 M16 SN609 4.30
90 60 170 205 90 60 25 115 15 20 33 M10 M12 SN510 3.50

45
110 70 210 255 115 70 30 135 18 23 50 M12 M16 SN610 4.70
100 70 210 255 95 70 28 130 18 23 33 M12 M16 SN511 3.70

50
120 80 230 275 120 80 30 150 18 23 53 M12 M16 SN611 5.80
110 70 210 255 105 70 30 135 18 23 38 M12 M16 SN512 4.40

55
130 80 230 280 125 80 30 155 18 23 56 M12 M16 SN612 6.40
120 80 230 275 110 80 30 150 18 23 43 M12 M16 SN513 5.40

60
140 95 260 315 130 90 32 175 22 27 58 M16 M20 SN613 8.60
130 80 230 280 115 80 30 155 18 23 41 M12 M16 SN515 6.10

65
160 100 290 345 140 100 35 195 22 27 65 M16 M20 SN615 11.80
92
Bearing No. Adapter Sleeve Locating Quantity
Ring
Number
1205K 22205K H205 HE205 SR52x5 2

2205K H305 HE305 SR52x7 1
1305K H305 HE305 SR62x8.5 2
2305K H2305 HE2305 SR62x10 1
1206K 22206K H206 HE206 SR62x7 2

2206K H306 HE306 SR62x10 1
1306K H306 HE306 SR72x9 2
2306K H2306 HE2306 SR72x10 1
1207K 22207K H207 HE207 SR72x8 2

2207K H307 HE307 SR72x10 1
1307K H307 HE307 SR80x10 2
2307K H2307 HE2307 SR80x10 1
1208K 22208K H208 HE208 SR80x7.5 2

2208K H308 HE308 SR80x10 1
1308K 21308K H308 HE308 SR90x10 2
2308K 22308K H2308 HE2308 SR90x10 1
1209K 22209K H209 HE209 SR85x6 2

2209K H309 HE309 SR85x8 1
1309K 21309K H309 HE309 SR100x10.5 2
2309K 22309K H2309 HE2309 SR100x10 1
1210K 22210K H210 HE210 SR90x6.5 2

2210K H310 HE310 SR90x10 1
1310K 21310K H310 HE310 SR110x11.5 2
2310K 22310K H2310 HE2310 SR110x10 1
1211K 22211K H211 HE211 SR100x6 2

2211K H311 HE311 SR100x8 1
1311K 21311K H311 HE311 SR120x12 2
2311K 22311K H2311 HE2311 SR120x10 1
1212K 22212K H212 HE212 SR110x8 2

2212K H312 HE312 SR110x10 1
1312K 21312K H312 HE312 SR130x12.5 2
2312K 22312K H2312 HE2312 SR130x10 1
1213K 22213K H213 HE213 SR120x10 2

2213K H313 HE313 SR120x12 1
1313K 21313K H313 HE313 SR140x12.5 2
2313K 22313K H2313 HE2313 SR140x10 1
1215K 22215K H215 HE215 SR130x8 2

2215K H315 HE315 SR130x10 1
1315K 21315K H315 HE315 SR160x14 2
2315K 22315K H2315 HE2315 SR160x10 1
93
Plummer Blocks
70~135mm
Bolt Bolt Housing
size size No.
d1 D H J L A A1 H1 H2 N N1 g t S
140 95 260 315 120 90 32 175 22 27 43 M16 M20 SN516 8.20

70
170 112 290 345 145 100 35 212 22 27 68 M16 M20 SN616 13.60
150 95 260 320 125 90 32 185 22 27 46 M16 M20 SN517 9.30

75
180 112 320 380 155 110 40 223 26 32 70 M20 M24 SN617 16.80
160 100 290 345 145 100 35 195 22 27 62.4 M16 M20 SN518 12.00
80
190 112 320 380 160 110 40 230 26 32 74 M20 M24 SN618 21.00
170 112 290 345 140 100 35 210 22 27 53 M16 M20 SN519 13.00
85
200 125 350 410 170 120 45 250 26 32 77 M20 M24 SN619 23.00
180 112 320 380 160 110 40 223 26 32 70.3 M20 M24 SN520 17.00
90
215 140 350 410 175 120 45 270 26 32 83 M20 M24 SN620 31.00
200 125 350 410 175 120 45 245 26 32 80 M20 M24 SN522 20.00
100
240 150 390 450 190 130 50 300 28 36 90 M24 M24 SN622 38.00
215 140 350 410 185 120 45 270 26 32 86 M20 M24 SN524 23.00
110
260 160 450 530 200 160 60 320 33 42 96 M24 M30 SN624 48.00
230 150 380 445 190 130 50 290 28 36 90 M24 M24 SN526 33.00
115
280 170 470 550 210 160 60 340 33 42 103 M24 M30 SN626 78.00
250 150 420 500 205 150 50 305 33 42 98 M24 M30 SN528 40.00
125
300 180 520 610 235 170 65 365 35 45 112 M30 M30 SN628 97.00
270 160 450 530 220 160 60 325 33 42 106 M24 M30 SN530 45.00
135
320 190 560 650 245 180 65 385 35 45 118 M30 M30 SN630 110.00
94
Bearing No. Adapter Sleeve Locating Quantity
Ring
Number
1216K 22216K H216 HE216 SR140x8.5 2

2216K H316 HE316 SR140x10 1
1316K 21316K H316 HE316 SR170x14.5 2
2316K 22316K H2316 HE2316 SR170x10 1
1217K 22217K H217 HE217 SR150x9 2

2217K H317 HE317 SR150x10 1
1317K 21317K H317 HE317 SR180x14.5 2
2317K 22317K H2317 HE2317 SR180x10 1
1218K 22218K H218 HE218 SR160x16.2 2

2218K 23218K H318 HE318 SR160x11.2 2
H2318 HE2318 SR160x10 1
1318K 22318K H318 HE318 SR190x15.5 2
2318K H2318 HE2318 SR190x10 1
1219K 22219K H219 HE219 SR170x10.5 2

2219K H319 HE319 SR170x10 1
1319K 22319K H319 HE319 SR200x16 2
2319K H2319 HE2319 SR200x10 1
2220K 22220K H320 HE320 SR180x12.1 2

23220K H2320 HE2320 SR180x10 1
1320K 22320K H320 HE320 SR215x18 2
2320K H2320 HE2320 SR215x10 1
2222K 22222K H322 HE322 SR200x13.5 2

23222K H2322 HE2322 SR200x10 1
1322K 22322K H322 HE322 SR240x20 2
2322K H2322 HE2322 SR240x10 1
22224K H3124 HE3124 SR215x14 2

23224K H2324 HE2324 SR215x10 1
22324K H2324 HE2324 SR260x10 1

22226K H3126 HE3126 SR230x13 2

23226K H2326 HE2326 SR230x10 1
22326K H2326 HE2326 SR280x10 1

22228K H3128 HE3128 SR250x15 2

23228K H2328 HE2328 SR250x10 1
22328K H2328 HE2328 SR300x10 1

22230K H3130 HE3130 SR270x16.5 2

23230K H2330 HE2330 SR270x10 1
22330K H2330 HE2330 SR320x10 1

95
Radial Spherical Plain Bearings
r 25 r 25
r 15 r 15
D
p
dk
dk
c c a
B a B
15~120mm GEG . . . ES GEG . . . ES - 2RS
Bearing Tilting
No angle
a (deg)
d D B C dk Cr Cor Cr Cor
GE15ES GE15ES-2RS 15 26 12 9 22.0 8 17 85 1730 8670 0.025

GE17ES GE17ES-2RS 17 30 14 10 25.0 10 21 106 2160 10810 0.041
GE20ES GE20ES-2RS 20 35 16 12 29.0 9 30 146 3060 14890 0.061
GE25ES GE25ES-2RS 25 42 20 16 35.5 7 48 240 4890 24480 0.110
GE30ES GE30ES-2RS 30 47 22 18 40.7 6 62 310 6300 31600 0.140
GE35ES GE35ES-2RS 35 55 25 20 47.0 6 80 400 8160 40800 0.220
GE40ES GE40ES-2RS 40 62 28 22 53.0 7 100 500 10200 51000 0.300
GE45ES GE45ES-2RS 45 68 32 25 60.0 7 127 640 12950 65280 0.400
GE50ES GE50ES-2RS 50 75 35 28 66.0 6 156 780 15900 79560 0.540
GE55ES GE55ES-2RS 55 85 40 32 74.0 7 200 1,000 20400 102000 0.940
GE60ES GE60ES-2RS 60 90 44 36 80.0 6 245 1,220 24990 124440 1.000
GE70ES GE70ES-2RS 70 105 49 40 92.0 6 315 1,560 32130 159120 1.500
GE80ES GE80ES-2RS 80 120 55 45 105.0 6 400 2,000 40800 204000 2.200
GE90ES GE90ES-2RS 90 130 60 50 115.0 5 490 2,450 49980 249900 2.700
GE100ES GE100ES-2RS 100 150 70 55 130.0 7 610 3,050 62220 311100 4.300
GE110ES GE110ES-2RS 110 160 70 55 140.0 6 655 3,250 66810 331500 4.700
GE120ES GE120ES-2RS 120 180 85 70 160.0 6 950 4,750 96900 484500 8.000
96

KYK Catalogue

Uploaded by

Copyright:

Available Formats

KYK Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KYK Catalogue

Uploaded by

Copyright:

Available Formats

Rolling Bearings Classifications

Rolling bearing construction

Deep groove ball bearings

Angular contact ball bearings

Cylindrical roller bearings

Tapered roller bearings

Spherical roller bearings

Ball Bearing unit

UCP UCF UCFL UCFC UCT

Bearing Designation, prefix and suffix

Snap ring groove with snap ring

Both side metal shields

Single row deep groove ball bearings

Bearing type Bearing series Diameter series

Prefix Description Suffix Description

Self Aligning ball bearings

Self aligning ball bearings

Bearing type Bearing Series Diameter series

Prefix Description Suffix Description

Angular Contact ball bearings

Angular contact ball bearings

Bearing type Bearing Series Diameter series

Prefix Description Suffix Description

Cylindrical roller bearings

Machined brass cage

NU type cylindrical roller bearings

Bearing type Bearing series Diameter series

Prefix Description Suffix Description

Tapered Roller bearings

Tapered roller bearings

Bearing type Bearing Series Diameter series

Prefix Description Suffix Description

Spherical Roller bearings

Machined brass cage

Tapered bore 1:12

Spherical roller bearings

Bearing type Bearing Series Diameter series

Prefix Description Suffix Description

Thrust ball bearings

Thrust ball bearings

Bearing type Bearing Series Diameter series

Prefix Description Suffix Description

Tolerances for bearings

Interference minimum and maximum values

Bearing internal clearance

Internal clearance selection

- Bearing with tapered bore

- Bearing with tapered bore

Bearing greasing methods and amounts

Regreasing intervals and grease life

Shell Not good for

Vibration of single bearing µm/s

Maximum acceleration of single bearing dB

12 4.0 0.20 0.97 0.36 99 37 53000 63000 604 0.0021

11 3.0 0.15 0.97 0.36 99 37 53000 63000 685 0.0010

13 3.50 0.15 1.10 0.44 112 45 48000 57000 686 0.0018

14 3.5 0.15 1.15 0.51 117 52 45000 54000 687 0.0020

16 4.00 0.20 1.60 0.71 163 72 42000 50000 688 0.0032

17 4.0 0.20 1.35 0.66 138 67 39000 46000 689 0.0035

d D B rs min Cr Cor Cr Cor