Partner for Performance

EN Tech Paper 08.2019

Elastomer Jaw Couplings

RINGFEDER® GWE 5104
Servo-Insert coupling with clamping hubs and dual slits

Sectional view
L
H
K
I

D1
d1

D3
d2
C1 H3 L3 DG1 ISO 4762

d1;d2 d1k;d2k
Size min-max min-max C1 D1 D3 H H3 I K L L3
mm mm mm mm mm mm mm mm mm mm mm
14 5 - 16 5 - 16 11 30 30 32,2 13 5 11 35 ---
19 6 - 20 6 - 20 25 40 40 46 16 12 14,5 66 ---
24 10 - 32 10 - 32 30 55 55 57 18 10,5 20 78 ---
28 10 - 38 10 - 38 35 65 65 71 20 11,5 24,5 90 ---
38 12 - 48 12 - 48 45 80 80 83 24 15,5 30 114 ---
42 14 - 54 14 - 54 50 95 85 95 26 18 32,5 126 28
48 15 - 60 15 - 60 56 105 95 106 28 21 37 140 32
55 35 - 74 35 - 74 65 120 120 120 30 26 45 160
65 35 - 80 35 - 80 75 135 135 135 35 28 50 185 ---
75 30 - 95 30 - 95 85 160 160 160 40 36 60 210 ---

Transmission of the couplings transmissible torque T can not longer be guaranteed Moment of inertia and weight (mass) are calculated with reference to the largest
for certain with borings < dmin. Types with borings < dmin, however, can be supplied. bore size.

Size T Hes nmax J Gw DG1 TA1

Nm 1/min 10-3kgm2 kg mm Nm
14 12,5 98 SH A 13000 0,006 0,042 1 x M3 2
19 17 98 SH A 10000 0,036 0,158 1 x M6 11
24 60 98 SH A 7000 0,15 0,304 1 x M6 15
28 160 98 SH A 6000 0,33 0,505 1 x M8 32
38 325 98 SH A 5000 0,96 0,934 1 x M8 38
42 450 98 SH A 4000 4,92 3,8 1 x M10 84
48 525 98 SH A 3600 8,26 4,9 1 x M12 145
55 685 98 SH A 3150 19,15 10,2 1 x M12 145
65 940 98 SH A 2800 30,72 13,7 1 x M12 145
75 1920 98 SH A 2350 66,68 21,34 1 x M16 295

To continue see next page

www.ringfeder.com 1
Partner for Performance

EN Tech Paper 08.2019

Elastomer Jaw Couplings RINGFEDER® GWE 5104

Transmissible torque T [Nm]

Transmissible torque

Size Ø5 Ø6 Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø30 Ø35 Ø40 Ø45 Ø50 Ø55 Ø60 Ø65 Ø70 Ø80 Ø90 Ø95
Nm
14 4,8 6,0 7,7 9,4 11 12,5 12,5 --- --- --- --- --- --- --- --- --- --- --- --- --- ---
19 --- 16 17 17 17 17 17 17 --- --- --- --- --- --- --- --- --- --- --- --- ---
24 --- --- --- 37 43 50 56 60 60 60 --- --- --- --- --- --- --- --- --- --- ---
28 --- --- --- 61 72 83 94 114 138 160 160 --- --- --- --- --- --- --- --- --- ---
38 --- --- --- --- 87 100 113 138 168 197 225 251 277 --- --- --- --- --- --- --- ---
42 --- --- --- --- --- 174 197 242 296 348 398 450 450 --- --- --- --- --- --- --- ---
48 --- --- --- --- --- --- 276 343 424 502 525 525 525 525 525 --- --- --- --- --- ---
55 --- --- --- --- --- --- --- --- --- --- 630 685 685 685 685 685 685 685 --- --- ---
65 --- --- --- --- --- --- --- --- --- --- 634 714 791 866 940 940 940 940 940 --- ---
75 --- --- --- --- --- --- --- --- --- --- 998 1125 1250 1370 1489 1604 1718 1830 1920 1920 1920

Explanations

d1;d2min = Min. bore diameter d1/d2 D3 = Outer diameter hub T = Transmissible torque at given TA
d1;d2max = Max. bore diameter d1/d2 H = Clearance diameter Hes = Hardness of the elastomeric spider
d1k;d2kmin = Min. bore diameter d1/d2 H3 = Length of damping module nmax = Max. rotation speed
with keyway
acc. to DIN 6885-1 l = Distance between center screw hole and J = Total moment of inertia
d1k;d2kmax = Max. bore diameter d1/d2 hub end Gw = Weight
with keyway acc. to DIN 6885-1 K = Distance shaft axis - clamping screw axis DG1 = Thread
C1 = Guided length in hub bore L = Total length TA1 = Tightened torque of clamping screw DG1
D 1 = Outer diameter L3 = Length

Ordering example
Series Spider hardness Spider bore dbz
Bore diameter d1 Bore diameter d2 Further details
Size (optional) 1) (optional) 1)

GWE 5104-42 40 41 64 SH D 42 *
1) If
a different spider hardness is selected, the detailed technical data for the sprockets must be observed. See chapter „Elastomer Jaw Couplings
RINGFEDER® GWE Technical description“ in Product Paper & Tech Paper „RINGFEDER® Elastomer Jaw Couplings“
* Keyway

Further information on
RINGFEDER® GWE 5104
on www.ringfeder.com

Disclaimer of liability
All technical details and notes are non-binding and cannot be used as a basis for legal claims. The user is obligated
to determine whether the represented products meet his requirements. We reserve the right carry out modifications
at any time in the interests of technical progress.

www.ringfeder.com 2