Scribd Logo
Upload

Welcome to Scribd!

  • 64 views

    Vital Technical Sdn. BHD.: VT-210 High Performance Sealant

    Uploaded by

    khai rule
    1. This document provides information on VT-210 High Performance Sealant, including identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicology, and disposal. 2. The product contains ethyl methyl ketoxime, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane, methyl tri(ethyl methyl ketoxime) silane, and distillates (petroleum), hydrotreated middle. It will release methyl ethyl ketoxime during application and curing. 3. Waste from the product must be disposed

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Vital Technical Sdn. BHD.: VT-210 High Performance Sealant

    Uploaded by

    khai rule
    64 views4 pages
    1. This document provides information on VT-210 High Performance Sealant, including identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicology, and disposal. 2. The product contains ethyl methyl ketoxime, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane, methyl tri(ethyl methyl ketoxime) silane, and distillates (petroleum), hydrotreated middle. It will release methyl ethyl ketoxime during application and curing. 3. Waste from the product must be disposed

    Original Title

    Material_Safety_Data_Sheet_(MSDS)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document provides information on VT-210 High Performance Sealant, including identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicology, and disposal. 2. The product contains ethyl methyl ketoxime, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane, methyl tri(ethyl methyl ketoxime) silane, and distillates (petroleum), hydrotreated middle. It will release methyl ethyl ketoxime during application and curing. 3. Waste from the product must be disposed

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    64 views4 pages

    Vital Technical Sdn. BHD.: VT-210 High Performance Sealant

    Uploaded by

    khai rule
    1. This document provides information on VT-210 High Performance Sealant, including identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicology, and disposal. 2. The product contains ethyl methyl ketoxime, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane, methyl tri(ethyl methyl ketoxime) silane, and distillates (petroleum), hydrotreated middle. It will release methyl ethyl ketoxime during application and curing. 3. Waste from the product must be disposed

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    VITAL TECHNICAL SDN. BHD.

    Issued date : 31/03/08


    Material Safety Data Sheet Rev. No. :4
    Revised date : 29/04/13
    VT-210
    Page : 1 of 4
    High Performance Sealant

    1. Identification of the substance/preparation and of the company/undertaking

    Product name : VT-210 High Performance Sealant


    Company : Vital Technical Sdn. Bhd. Telephone : +603 - 6092 0000
    No. 93, Jalan Industri 3/3, Fax : +603 - 6092 0099
    Rawang Integrated Industrial Park, Email : [email protected]
    48000 Rawang, Selangor, Website : http://www.vitaltechnical.com
    Malaysia.

    2. Hazard(s) identification

    GHS-Labelling Regulation (EC) No. 1272/2008:


    This product has not been classified as hazardous according to the legislation in force.

    3. Composition/Information on ingredients

    Chemical name CAS No. EINECS % (w/w) Toxicology Data


    LD50 oral (rat): 2.4 - 3.7 g/kg
    Ethyl methyl ketoxime 96-29-7 202-496-6 0.1 - 1.0 LD50 dermal (rabbit): 1.0 - 2.0 g/kg
    LC50 inhalation (rat, 4hr): 20 mg/L
    LD50 oral (rat): >2.2 g/kg
    N-(2-aminoethyl)-3-
    1760-24-3 217-164-6 0.1 - 1.0 LD50 dermal (rabbit): >2.0 g/kg
    aminopropyl-trimethoxysilane
    LC50 inhalation (rat, 4hr): <2.44 mg/L
    LD50 oral (rat): >2.2 g/kg
    Methyl tri(ethyl methyl
    22984-54-9 245-366-4 1 - 10 LD50 dermal (rabbit): no data
    ketoxime) silane
    LC50 inhalation (rat, 4hr): >4.8 mg/L
    LD50 oral (rat): >5.0 g/kg
    Distillates (petroleum),
    64742-46-7 265-148-2 1 - 10 LD50 dermal (rabbit): >2.0 g/kg
    hydrotreated middle
    LC50 inhalation (rat, 4hr): 4.6 mg/L

    4. First-aid measures

    Inhalation
    Remove to fresh air, keep warm and at rest. Contact physician if discomfort persists.
    Skin contact
    Remove contaminated clothing. Rinse with copious amount of water and soap. Get medical advice if skin irritation
    or a rash occurs.
    Eye contact
    Contact lenses should be removed. Rinse with copious amount of water immediately. Seek medical advice if eye
    irritation persists.
    Ingestion
    DO NOT induce vomiting. Drink plenty of water followed by milk if available. Never give anything by mouth to an
    unconscious person.

    5. Fire-fighting measures

    Suitable extinguishing media


    Foam, powder and carbon dioxide.
    Special fire fighting procedures
    Keep up-wind to avoid fumes. Use NIOSH-approved self-contained breathing apparatus and full protective clothing.
    Unusual fire/explosion hazards
    VITAL TECHNICAL SDN. BHD. Issued date : 31/03/08
    Material Safety Data Sheet Rev. No. :4
    Revised date : 29/04/13
    VT-210
    Page : 2 of 4
    High Performance Sealant

    None known.
    Thermal decomposition products
    Carbon dioxide, carbon monoxide and silicone dioxide. At temperatures above 150 °C formaldehyde will form.
    Protective measures in fire
    NIOSH-approved self-contained breathing apparatus and full protective clothing must be worn in case of fire.

    6. Accidental release measures

    Person-related safety precautions


    Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.
    Measure for cleaning/collecting
    Scrape, wipe or soak with inert liquid binding material (sand, diatomite, acid binders, universal binders, sawdust,
    etc). Dispose of contaminated material as waste according to item 13.
    Additional information:
    Prevent spillage from entering drainage/sewer systems. Spillages or uncontrolled discharges into watercourses
    must be IMMEDIATELY alerted to the Environmental Agency or other appropriate regulatory body.

    7. Handling and storage

    Handling
    Sealant releases methyl ethyl ketoxime (MEKO) during application and curing therefore ensure good ventilation
    during use. Avoid contact with skin and eyes.
    Protection against fire/explosion
    General rules of fire prevention should be observed.
    Storage
    Keep containers and cartridges tightly closed and dry. Store in a well-ventilated area, protected from direct sunlight
    with temperature not exceeding 30 °C. Keep away from heat, sources of ignition and incompatibles.

    8. Exposure controls/personal protection

    Industrial hygiene
    Remove immediately all contaminated clothing. Do not inhale vapor. Wash hands and contaminated areas with
    water and soap before leaving the work site. Change clothing before leaving workplace and wash before reuse.
    Hand protection
    Suitable protective gloves like rubber or plastic.
    Respiratory protection
    An organic respirator NIOSH-approved for organic vapors is recommended where local ventilation is not adequate.
    Eye protection
    Protective goggles/safety glasses with side shields.

    9. Physical and chemical properties

     Form : Thixotropic paste


     Odor : Slight unique odor
     Boiling temperature : Not determined
     Flash point : 63 °C
     Auto-ignition temperature : 450 °C
     Solubility in water : Insoluble
     Specific gravity : 1.04
     Vapor density : Not determined
     VOC Content : <4 %(w/w)
    VITAL TECHNICAL SDN. BHD. Issued date : 31/03/08
    Material Safety Data Sheet Rev. No. :4
    Revised date : 29/04/13
    VT-210
    Page : 3 of 4
    High Performance Sealant

    10. Stability and reactivity

    Stability and reactivity


    Stable when stored under recommended conditions and no reactive hazards known.
    Conditions to avoid
    None known.
    Hazardous decomposition products
    During normal storage, hazardous decomposition will not occur. At higher temperature, thermal decomposition
    products will form. Refer to section 5.
    Hazardous polymerization
    Hazardous polymerization will not occur.
    Incompatible materials
    Moisture, strong acid and bases.

    11. Toxicology information

    No specific oral, inhalation or dermal toxicology data is known for this product. Any toxicological data included in
    this section is based on the data associated with the components.
    Test Results
    Oral Toxicity (acute) Not classified
    Dermal Toxicity (acute) Not classified
    Inhalation Toxicity (acute) Not classified
    Eye Irritation No data available
    Dermal Irritation No data available
    Skin Sensitization No data available
    Carcinogenicity Not classified
    Reproductive Toxicity Not classified

    Additional notes
    This product will release MEKO on curing or in contact with water/moisture. A lifetime (about two years) inhalation
    study in male and female mice and rats revealed that liver tumors were observed in male mice and rats at a high
    exposure level of 375 ppm.

    12. Ecological information

    Ecology toxicity : No adverse effect on aquatic organisms are predicted.


    Persistence/Degradability : Not likely to present danger to terrestrial organisms.
    Bioaccumulative potential : No bioaccumulation potential.
    Mobility : No data available.
    Individual components of this mixture have been independently tested by the raw material suppliers and any known
    results have been presented above. The results for the individual components may not be representative of the
    ecological toxicity of this finished product. This finished product has not been tested to determine individual
    toxicological/ecological limits Great caution should be taken to prevent release to the environment. See Section 13
    for further information.

    13. Disposal information

    Waste must be disposed of in accordance with federal, state and local environmental control regulations. Preferred
    method of disposal includes incineration under controlled conditions in accordance with all local and national laws
    and regulations. The generation of waste should be avoided or minimized wherever possible. Waste, even in small
    quantities, should never be poured down into drains, sewers or watercourses.
    VITAL TECHNICAL SDN. BHD. Issued date : 31/03/08
    Material Safety Data Sheet Rev. No. :4
    Revised date : 29/04/13
    VT-210
    Page : 4 of 4
    High Performance Sealant

    14. Transport information

    Road transport (ADR)


    Not regulated

    Marine transport (IMDG)


    Not regulated

    Air transport (IATA)


    Not regulated

    15. Regulatory information

    Labelling according to EC Directives:


    Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.

    Inventory Status:
    All the components are listed in the Australia AICS, China IECSC, Europe EINECS, Japan ENCS, Korea KECI,
    Philippines PICCS and United States TSCA inventories.

    16. Other information

    Definitions:
     TLV : Threshold Limit Value.
     LD50 : The minimum dose required for lethal effects in 50% of a given population of test specimens.
     NIOSH : National Institute for Occupational Safety and Health.
     AICS : Australian Inventory of Chemical Substances
     IECSC : Inventory of Existing Chemical Substances in China.
     EINECS : European Inventory of Existing Commercial Chemical Substances.
     ENCS : Existing & New Chemical Substances.
     KECI : Korea Existing Chemicals Inventory.
     PICCS : Philippines Inventory of Chemicals and Chemical Substances.
     TSCA : Toxic Substances Control Act.

    All materials may present unknown hazards and should be used with caution. Although certain hazards are
    described herein, we cannot guarantee these are the only hazards that exist. The details contained herein are
    based on our present state of knowledge and experience in characterizing our product with regard to any possible
    safety requirement. We do, however, pass them on without any warranty or property assurances.

    You might also like