Aeroquip® Triple Crown GH120 GH781 GH493

Advantage Hose Products GH663 GH793 FC254

Triple Crown Advantage:

• Higher Pressures
• Improved Temperatures
• Improved Abrasion Resistance
Raise Your Standards with Eaton’s Aeroquip MatchMate
Global Hose Product with the Triple Crown Advantage

Our improved designs have enabled us to increase pressures on select

Aeroquip hose styles by an average of 24% over the competition.

Improvements in higher hose operating temperatures are the direct result

of Eaton’s advancements in rubber technology. Eaton now has the highest
temperature ratings compared to similar competitive products designed to
meet EN specifications. Select Aeroquip braided and spiral hose part numbers
now meet -40°C to +127°C (-40°F to +260°F).

New Dura-Tuff™ covers have been improved for better protection against
abrasion, and are now more abrasion resistant than traditional rubber covers.

Benefits to you:
• Higher pressures and temperatures can extend the life of a hydraulic hose
in a typical application.
• Hose products to meet market needs with a better long-term value.
• Meets the requirements of today’s higher pressure hydraulic systems being
introduced into the market.

2 EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009
MatchMate Global™
HI-IMPULSE

GH663 Triple Crown Advantage

Meets and exceeds • Pressure
SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN • Temperature
• Abrasion Resistance

r r
Minimum Minimum
Part Hose Hose Working Burst Bend
Number I.D. O.D. r r Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in kg/m lbs/ft
GH663-4 6,4 0.25 13,5 0.53 255 3,700 1,020 14,800 100,0 4.00 0,24 0.16
r r
GH663-6 9,7 0.38 17,5 0.69 235 3,400 940 13,600 125,0 5.00 0,37 0.25
GH663-8 12,7 0.50 20,6 0.81 200 2,900 800 11,600 180,0 7.00 0,45 0.30
GH663-12 19,1 0.75 27,8 1.09 138 2,000 552 8,000 241,3 9.50 0,67 0.45
GH663-16 25,4 1.00 35,8 1.41 103 1,500 412 6,000 304,8 12.00 1,01 0.68
r
GH663-20 31,8 1.25 43,4 1.71 69 1,000 276 4,000 419,1 16.50 1,31 0.88
GH663-24 38,1 1.50 50,6 1.99 52 750 208 3,000 508,0 20.00 1,56 1.05
GH663-32 50,8 2.00 64,0 2.52 41 600 164 2,400 635,0 25.00 1,95 1.31

Construction: Temp. Range: Typical Application: Qualified Fittings:

Synthetic rubber tube, single -40°C to +127°C Hydraulic system service TTC Series (non-skive)
wire braid reinforcement (-40°F to +260°F) with petroleum and water- and Global Braided (skive)
and Dura-Tuff™ synthetic based fluids, for general nipples with 1SA sockets
rubber cover. industrial service.
For Complete Agency MSHA Accepted ISO 1436a
Listings: Marine Application J1942/1
See pages 346-348 Hydraulic Service
in catalog #
A-HOOV-MC001-E1.

EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009 3
 MatchMate ICE™
Cold Temperature Applications

GH120 Triple Crown Advantage

Meets and exceeds • Pressure
SAE 100R16 Type S, EN857 Type 2SC Performance • Temperature
• Abrasion Resistance

....... 3
....... 4
....... 3 r r
....... 3
Minimum Minimum
Part Hose Hose Working Burst Bend
Number I.D. O.D. r r Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in kg/m lbs/ft
GH120-4 6,4 0.25 14,2 0.56 414 6,000 1656 24,000 50,8 2.00 0,30 0.20
r r
GH120-6 9,7 0.38 17,3 0.68 345 5,000 1380 20,000 63,5 2.50 0,40 0.27
GH120-8 12,7 0.50 20,8 0.82 310 4,500 1240 18,000 88,9 3.50 0,58 0.39
GH120-10 16,0 0.63 24,9 0.98 276 4,000 1104 16,000 101,6 4.00 0,74 0.50
GH120-12 19,1 0.75 28,4 1.12 241 3,500 964 14,000 120,7 4.75 0,92 0.62
r
GH120-16 25,4 1.00 35,8 1.41 193 2,800 772 11,200 152,4 6.00 1,22 0.82
GH120-20 31,8 1.25 43,4 1.71 159 2,300 636 9,200 209,6 8.25 1,60 1.07
GH120-24 38,1 1.50 51,6 2.03 138 2,000 552 8,000 254,0 10.00 2,11 1.42
GH120-32 50,8 2.00 63,8 2.51 103 1,500 412 6,000 317,5 12.50 2,80 1.88

Construction: Temp. Range: Typical Application: Qualified Fittings:

Aeroquip brand exclusive -57°C to +100°C Low temperature flexing TTC Series (non-skive)
low temperature compound (-70°F to +212°F) and hydraulic system and Global Braided (skive)
tube and cover, double wire service with petroleum and nipples* with 1SB sockets
reinforcement, Dura-Tuff™ water-base fluids. For use *-04 thru -20 only
synthetic rubber cover. in frigid environments on
construction equipment and
other mobile applications.
For Complete Agency
Listings:
See pages 346-348
in catalog #
A-HOOV-MC001-E1.

4 EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009
MatchMate Global™
HI-IMPULSE

GH781 Triple Crown Advantage

Meets and exceeds • Pressure
SAE 100R16 Type S, EN857 2SC, ISO 11237-1 Type 2SC • Temperature
• Abrasion Resistance

r r
Minimum Minimum
Part Hose Hose Working Burst Bend
Number I.D. O.D. r r Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in kg/m lbs/ft
GH781-4 6,4 0.25 13,5 0.53 448 6,500 1792 26,000 50,8 2.00 0,33 0.22
r r
GH781-6 9,7 0.38 17,5 0.69 366 5,300 1464 21,200 63,5 2.50 0,43 0.29
GH781-8 12,7 0.50 20,6 0.81 310 4,500 1240 18,000 88,9 3.50 0,58 0.39
GH781-10 15,9 0.63 23,6 0.93 276 4,000 1104 16,000 101,6 4.00 0,65 0.44
GH781-12 19,1 0.75 27,9 1.10 241 3,500 964 14,000 120,7 4.75 0,79 0.53
r
GH781-16 25,4 1.00 36,1 1.42 207 3,000 828 12,000 152,4 6.00 1,07 0.72
GH781-20 31,8 1.25 41,9 1.65 172 2,500 688 10,000 209,6 8.25 1,62 1.09
GH781-24 38,1 1.50 51,6 2.03 138 2,000 552 8,000 254,0 10.00 2,08 1.40
GH781-32 50,8 2.00 64,3 2.53 110 1,600 440 6,400 317,5 12.50 2,83 1.90

Construction: Temp. Range: Typical Application: Qualified Fittings:

Synthetic rubber tube, -40°C to +127°C Hydraulic system service TTC Series (non-skive)
double wire braid (-40°F to +260°F) with petroleum and water- and Global Braided (skive)
reinforcement and Dura- based fluids, for general nipples with 1SB sockets
Tuff™ synthetic rubber industrial service.
cover. Meets or exceeds MSHA Accepted
For Complete Agency
EN requirements at 1/2 SAE Marine Application J1942/1 -
Listings:
Bend Radius. Hydraulic only
See pages 346-348
in catalog #
A-HOOV-MC001-E1.

EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009 5
MatchMate Global™
HI-IMPULSE

GH793 Triple Crown Advantage

Meets and exceeds • Pressure
SAE 100R2AT Type S, EN853 2SN, ISO 1436-1 Type 2SN • Temperature
• Abrasion Resistance

r r
Minimum Minimum
Part Hose Hose Working Burst Bend
Number I.D. O.D. r r Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in kg/m lbs/ft
GH793-4 6,4 0.25 15,2 0.60 448 6,500 1792 26,000 101,6 4.00 0,39 0.26
r r
GH793-6 9,7 0.38 19,1 0.75 400 5,800 1600 23,000 127,0 5.00 0,57 0.38
GH793-8 12,7 0.50 22,1 0.87 310 5,000 1380 20,000 177,8 7.00 0,68 0.46
GH793-10 16,0 0.63 24,9 0.98 276 4,000 1104 16,000 203,2 8.00 0,80 0.54
GH793-12 19,1 0.75 29,5 1.16 241 3,500 964 14,000 241,3 9.50 0,98 0.66
r
GH793-16 25,4 1.00 38,1 1.50 207 3,000 828 12,000 304,8 12.00 1,50 1.01
GH793-20 31,8 1.25 48,8 1.92 172 2,500 688 10,000 419,1 16.50 2,29 1.54
GH793-24 38,1 1.50 54,6 2.15 138 2,000 552 8,000 508,0 20.00 2,50 1.68
GH793-32 50,8 2.00 63,8 2.51 110 1,600 440 6,400 635,0 25.00 3,30 2.22

Construction: Temp. Range: Typical Application: Qualified Fittings:

Synthetic rubber tube, double -40°C to +127°C Hydraulic system service TTC Series (non-skive)
wire braid reinforcement (-40°F to +260°F) with petroleum and water- and Global Braided (skive)
and Dura-Tuff™ synthetic based fluids, for general nipples with 1SB sockets
rubber cover. industrial service.
For Complete Agency MSHA Accepted
Listings: Marine Application J1942/1 -
See pages 346-348 Hydraulic only
in catalog #
A-HOOV-MC001-E1.

6 EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009
MatchMate Global™
1/2 SAE Bend Radius

GH493 Triple Crown Advantage

Meets and exceeds • Pressure
SAE 100R12, EN856 Type R12, EN856 4SP Performance (-8 thru -16) • Temperature
• Abrasion Resistance

r r
Minimum Minimum
Part Hose Hose Working Burst Bend
Number I.D. O.D. r r Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in kg/m lbs/ft
GH493-6 9,7 0.38 20,1 0.79 448 6,500 1792 26,000 62,5 2.50 0,70 0.47
r r
GH493-8 12,7 0.50 23,4 0.92 414 6,000 1656 24,000 90,0 3.50 0,88 0.59
GH493-10 16,0 0.63 28,2 1.11 414 6,000 1656 24,000 100,0 4.00 1,03 0.69
GH493-12 19,1 0.75 30,5 1.20 379 5,500 1516 22,000 120,0 4.75 1,37 0.92
GH493-16 25,4 1.00 37,6 1.48 352 5,100 1408 20,400 150,0 6.00 1,82 1.22
r
GH493-20 31,8 1.25 46,5 1.83 310 4,500 1240 18,000 210,0 8.25 2,44 1.64
GH493-24 38,1 1.50 53,8 2.12 276 4,000 1104 16,000 250,0 10.00 3,12 2.10
GH493-32 50,8 2.00 67,1 2.64 276 4,000 1104 16,000 320,0 12.50 4,18 2.81

Construction: Temp. Range: Typical Application: Qualified Fittings:

Synthetic rubber tube, -40°C to +127°C Hydraulic system service TTC12 Series
4-spiral wire reinforcement (-40°F to +260°F) with petroleum and water-
and Dura-Tuff™ synthetic based fluids, for general
MSHA Accepted
rubber cover. industrial service. Marine Application J1942/1
For Complete Agency Hydraulic Only, ABS
Listings:
See pages 346-348
in catalog #
A-HOOV-MC001-E1.

EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009 7
Very High Pressure Hose

FC254 Triple Crown Advantage

Meets and exceeds • Pressure
SAE 100R11, EN856 4SH Performance • Temperature
• Abrasion Resistance

r r
Maximum Minimum Minimum
Part Hose Hose r r Operating Burst Bend
Number I.D. O.D. Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in kg/m lbs/ft
FC254-08*
r r 12,7 0.50 24,9 0.98 531,0 7,700 2124,0 30,800 203,2 8.00 0,70 0.47
FC254-12 19,1 0.75 32,0 1.26 496,0 7,200 1986,0 28,800 279,4 11.00 0,88 0.59
FC254-16 25,4 1.00 38,6 1.52 407,0 5,900 1627,0 23,600 304,8 12.00 1,03 0.69
FC254-20 31,8 1.25 45,7 1.80 352,0 5,100 1407,0 20,400 419,1 16.50 1,37 0.92
FC254-24 38,1 1.50 54,1 2.13 300,0 4,350 2000,0 17,400 508,0 20.00 1,82 1.22
r
FC254-32 50,8 2.00 68,1 2.68 276,0 4,000 1100,0 16,000 635,0 25.00 2,44 1.64
* Available with BRUISER cover as FC854-08.

Construction: Temp. Range: Typical Application: Qualified Fittings:

Synthetic rubber tube, -40°C to +127°C Hydraulic system service Global Spiral TTC & ISC
4-heavy spiral wire (-40°F to +260°F) with petroleum and water-
reinforcement and base fluids, for general
Dura-Tuff™ synthetic industrial use.
rubber cover.
For Complete Agency Listings:
See pages 346-348
in catalog #
A-HOOV-MC001-E1.

8 EATON Aeroquip Triple Crown Advantage Hose Pressures A-HOOV-TB001-E December 2009
Eaton Eaton Eaton
Hydraulics Group USA Hydraulics Group Europe Hydraulics Group Asia Pacific
14615 Lone Oak Road Route de la Longeraie 7 Eaton Building
Eden Prairie, MN 55344 1110 Morges 4th Floor, No. 3 Lane 280 Linhong Rd.
USA Switzerland Changning District
Tel: 952-937-9800 Tel: +41 (0) 21 811 4600 Shanghai 200335
Fax: 952-294-7722 Fax: +41 (0) 21 811 4601 China
www.eaton.com/hydraulics Tel: (+86 21) 5200 0099
Fax: (+86 21) 5200 0400

© 2009 Eaton Corporation

All Rights Reserved
Printed in USA
Document No. A-HOOV-TB001-E
December 2009