HP Array Configuration Utility
HP Array Configuration Utility
HP Array Configuration Utility
Description
Enhancements
Initial release, providing support for the following HP Smart Array controllers:
Installation Instructions
To ensure the integrity of your download, HP recommends verifying your results with
this MD5 Checksum value:
9cc0a3ccd6ca7a1e0556ea1098288e98 hpacucd-8.20-0-x86.zip
Installation:
Contents of this ZIP file:
Readme.txt
CD ISO image
To create a CD from this ISO image, you must use a software utility capable of writing an ISO file to
a recordable media such as CD-R.
Note: Simply copying the ISO file to a CD-R will NOT result in a usable CD. HP
recommends you run MD5 Checksum on the Zip file and/or ISO image prior to burning the
CD. HP also recommends that you turn the verify feature "ON".
CD labeling: For reference purposes, please label your resulting CD as follows:
Important:
This ISO contains a bootable Array Configuration Utility for configuring HP Smart Array Controllers
offline.
Product
information
» Overview & Features
» Key benefits
Support
» Download software
» Support & Documents
» User forum
» Resource library
Overview
All Smart Array products share a common set of configuration, management and diagnostic
tools, including Array Configuration Utility (ACU), Array Diagnostic Utility (ADU), and Systems
Insight Manager. This software consistency of tools reduces the cost of training for each
successive generation of product and takes much of the guesswork out of troubleshooting field
problems. These tools lower the total cost of ownership by reducing training and technical
expertise necessary to install and maintain HP server storage.
What's new
Support for 6400 EM Controller
Improved application performance
New keyboard controls and hotkeys in Internet Explorer
A new local application mode which uses the web browser to render the user interface,
but will completely remove the web server, thus allowing the application to be run as a
local application only on Windows platforms
A Windows setup dialog for simplified access to execution mode options: Local
Application Mode or Remote Service Mode
Ideal environment
Small, medium, and large data center administrators needing to configure RAID storage
environments.
Hardware Requirements:
Smart Array Controllers (Windows and Linux support)
MSA1000 (Windows and Linux support)
StorageWorks Enclosure 4x00 family of products (Windows support only)
Operating Systems:
Windows 2000 and 2003 (download ACU version 6.xx)
Linux (download ACU version 6.xx)
Windows NT4.0 (download ACU Legacy)
Windows 2003 Advanced Server (64-bit) - ships with Support Pack
Open VMS - ships with Support Pack
Tru64 - ships with Support Pack
For specific Windows and Linux version support information, see the Readme Files located
within the product downloads.
Printable version