Scotch Yoke Design: Eha / Ehas High Pressure Electro-Hydraulic Actuators
Scotch Yoke Design: Eha / Ehas High Pressure Electro-Hydraulic Actuators
Scotch Yoke Design: Eha / Ehas High Pressure Electro-Hydraulic Actuators
Double-acting and spring return electro-hydraulic solutions for on-off valves on heavy duty service, suitable for high
pressure supply. Models available for output torques to 60,000 Nm.
Features
EHA / EHAS electro-hydraulic actuators use a Design pressure: EHA/EHAS 190 barg maximum Actuators
self-contained power unit to provide operation Supply medium: Hydraulic oil Safety integrity level
and control of ¼” turn valves in on-off applications Output torque: EHA Double acting torque to Suitable for use in SIL2 applications
when the primary power source (instrument air or 60,000 Nm Area classification
hydraulic supply) is unavailable. EHAS Spring starting torque (ATEX) – Ex d IIB T4
up to 35,000 Nm Enclosure standards
EHAS spring ending torque (IEC 60529) - IP65
up to 25,800 Nm Pressure equipment directive
Ambient temperature 2014/68/EU
Standard range: -20° C to +55° C Machinery directive
(-4°F to + 131°F) 2006/42/EC
Motor
Motor power: 0.25 KW
Motor voltage: 3-phase 400 V AC 50 Hz or
60 Hz (single phase and DC
available on request)
10
31 8
33
18
22
2
17
16
1
30
EHAS Spring return
19 9 27
26
7
25
12 10
4
3
5
11 6
32
31
24
14
23
33
18
15 22 29
17
16 28
30
19 8
7
11 12
32
14
15
Materials
Part Material
1 Housing Carbon steel
2 Yoke Carbon steel
3 Yoke bushing Bronze
4 Cover Carbon steel
5 Guide block pin Alloy steel
6 Sliding block Bronze
7 Guide block Carbon steel
8 Guide bar Alloy steel (hard chrome plated)
9 Guide block bushing Steel + bronze + PTFE
10 Travel stop screw Carbon steel
11 Cylinder head flange Carbon steel
12 Piston rod bushing Steel + bronze + PTFE
13 Piston rod seal NBR rubber
14 Piston rod Alloy steel (hard chrome plated)
15 Piston Carbon steel
16 Piston guide sliding ring PTFE + graphite
17 Piston seal O-ring PTFE + NBR rubber
18 Cylinder tube Carbon steel (ENP)
19 Cylinder end flange Carbon steel
20 Cylinder seal O-ring NBR rubber
21 Sealing washer PVC
22 Tie rod Alloy steel
23 Spring container Carbon steel
24 Spring Carbon steel
25 Spring thrust flange Carbon steel
26 Guide rod Alloy steel (hard chrome plated)
27 Guide rod bushing Steel + bronze + PTFE
28 Container rod Alloy steel (hard chrome plated)
29 Container rod bushing Steel + bronze + PTFE
30 Stop setting screw Carbon steel
31 Back-up ring NBR rubber
32 Piston rod seal ring PTFE + graphite + NBR
33 O-ring NBR rubber
2
EHA / EHAS high pressure electro-hydraulic actuators
Hydraulic diagrams
Electric connection to
microswitches
Nitrogen test/recharge
connection
Electric connection to
microswitches
3
EHA / EHAS high pressure electro-hydraulic actuators
HPU design
Components
Part Quantity Part Quantity
956 Electric motor (ATEX) 1 356 C Hydraulic filter 1
954 Electric control panel 1 356 B Hydraulic filter 1
621 Pressure gauge 1 356 A Hydraulic filter 1
561 Oil pouring plug with filter 1 352 B Needle valve 1
560 Electric level switch 1 352 A Needle valve 1
555 Oil tank 1 351 Stop valve 1
542 Hydraulic rotating pump 1 301 Cabinet 1
540 Hand pump 1 286 Dust excluder 1 Standard configuration for quick delivery:
526 Bidirectional flow regulator 2 27 Inspection hatch 1 NPT electrical cable connections
519 Electric pressure switch 1 26 Discharge plug 1 Accumulator with one stroke
442 AB 3/2 n.c. Poppet type sov 2 13 Visual level rod 1 Tubing in imperial size
395 B Relief valve PED/CE 1 12 Manifold 1 Hydraulic components in carbon steel
395 AB Relief valve 1 11 Elastic joint 1 24 V DC solenoid valve
379 A B C Check valve 3 10 Flange 1 RAL 5010 System 01 paint with level C4 protection
9 Flow restrictor 1 Valve actuator coupling (factory standard drawing)
400 V (50/60Hz) 3 Phase Motor
4
EHA double acting electro-hydraulic actuator
Output torques (Nm) and technical data - canted yoke design - one oil stroke
5
EHA double acting electro-hydraulic actuator
Output torques (Nm) and technical data - canted yoke design - three oil strokes
6
EHA double acting electro-hydraulic actuator
Output torques (Nm) and technical data - symmetric yoke design - one oil stroke
7
EHA double acting electro-hydraulic actuator
Output torques (Nm) and technical data - symmetric yoke design - three oil strokes
8
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - canted yoke design - spring to close - one oil stroke
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
9
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - canted yoke design - spring to close - two oil strokes
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
10
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - canted yoke design - spring to open - one oil stroke
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
11
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - canted yoke design - spring to open - two oil strokes
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
12
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - symmetric yoke design - spring to close - one oil stroke
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
13
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - symmetric yoke design - spring to close - two oil strokes
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
14
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - symmetric yoke design - spring to open - one oil stroke
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
15
EHAS spring return electro-hydraulic actuator
Output torques (Nm) and technical data - symmetric yoke design - spring to open - two oil strokes
Note
BTO: Brake to open
RTO: Running to open
ETO: End to open
BTC: Brake to close
RTC: Running to close
ETC : End to close
16
EHA double acting electro-hydraulic actuator
Dimensions
D E
A
ØH
B G
X1
X2
X3
17
EHAS spring return electro-hydraulic actuator
Dimensions - spring to close
D E
A M
ØH
F
N
B G
X1
X2
X3
18
EHAS spring return electro-hydraulic actuator
Dimensions - spring to open
D E
M
A
ØH
B G
N
X1
X2
X3
19
EHA / EHAS high pressure electro-hydraulic actuators
Mounting dimensions - couplings models 0.9 to 6
Drive sleeve
H max
+0.5
0
h₁
+0.1
Ø d₂ Ø d₄
h₂
Ø d₃±0.2
Ø d₁ max
N. threaded holes
N.8 holes flange
D1
0 .4 (but the holes are on centerline
instead of straddle the centerline)
W
Flow line
N.4 holes flange
+0.2 45º
Ø d₅ +0.1
20
EHA / EHAS high pressure electro-hydraulic actuators
Mounting dimensions - stem acceptance
Notes
1. The listed maximum acceptance values are applicable for stems with keyway parallel or perpendicular to
the flow line and for square stems with diagonal parallel with the flow line.
2. Key according to UNI6604 or DIN 6885 sh.1 or BS4325 part 1 or ISO 773 or equivalent.
3. * S max: maximum external diameter in case of rounded edge.
4. ** Without adapter flange.
21
EHA / EHAS high pressure electro-hydraulic actuators
EHA Selection guide
Note
Consult factory for more options including:
316 SS solenoid valve
316 SS hydraulic components (motor, pump and accumulator not included)
Low temperature version
Special electrical certification
Special paint
Special motor voltage
Special limit switch box
Valve actuator adaptation
22
EHA / EHAS high pressure electro-hydraulic actuators
EHAS Selection guide
Note
Consult factory for more options including:
IMVS high pressure PST device, unpainted SS. ATEX/IECEx II 2G Ex-d IIB T5 with Hart, RS485 and Beacon®
316 SS solenoid valve
316 SS hydraulic components (motor, pump and accumulator not included)
Low temperature version
Special electrical certification
Special paint
Special motor voltage
Special limit switch box
Valve actuator adaptation
SIL capability
23
Biffi reserve the the right to change product designs and specifications without notice.
24