Module 17 - Build A Small Network

Module 17: Build a Small
Network
Introduction to Networks v7.0
(ITN)
Module Objectives
Module Title: Build a Small Network
Module Objective: Implement a network design for a small network to include a router, a switch, and
end devices.
Topic Title Topic Objective
Devices in a Small Network Identify the devices used in a small network.
Small Network Applications and Protocols Identify the protocols and applications used in a small network.
Scale to Larger Networks Explain how a small network serves as the basis of larger networks.
Use the output of the ping and tracert commands to verify connectivity
Verify Connectivity
and establish relative network performance.
Use host and IOS commands to acquire information about the devices
Host and IOS Commands
in a network.
Troubleshooting Methodologies Describe common network troubleshooting methodologies.
Troubleshooting Scenarios Troubleshoot issues with devices in the network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2
17.1 Devices in a Small
Network
Devices in a Small Network
Small Network Topologies
• The majority of businesses are small most of the business networks are also
small.
• A small network design is usually simple.
• Small networks typically have a single WAN connection provided by DSL,
cable, or an Ethernet connection.
• Large networks require an IT department to maintain, secure, and
troubleshoot network devices and to protect organizational data. Small
networks are managed by a local IT technician or by a contracted
professional.
Device Selection for a Small Network
Like large networks, small networks require planning and design to meet user
requirements. Planning ensures that all requirements, cost factors, and deployment
options are given due consideration. One of the first design considerations is the type of
intermediary devices to use to support the network.
Factors that must be considered when selecting network devices include:

• cost
• speed and types of ports/interfaces
• expandability
• operating system features and services
IP Addressing for a Small Network
When implementing a network, create an IP addressing scheme and use it. All hosts and
devices within an internetwork must have a unique address. Devices that will factor into
the IP addressing scheme include the following:
• End user devices - The number and type of connections (i.e., wired, wireless, remote
access)
• Servers and peripherals devices (e.g., printers and security cameras)
• Intermediary devices including switches and access points
It is recommended that you plan, document, and maintain an IP addressing scheme

based on device type. The use of a planned IP addressing scheme makes it easier to
identify a type of device and to troubleshoot problems.
Redundancy in a Small Network
In order to maintain a high degree of
reliability, redundancy is required in the
network design. Redundancy helps to
eliminate single points of failure.
Redundancy can be accomplished by

installing duplicate equipment. It can
also be accomplished by supplying
duplicate network links for critical
areas.
Traffic Management
• The goal for a good network design is to
enhance the productivity of the employees
and minimize network downtime.
• The routers and switches in a small network
should be configured to support real-time
traffic, such as voice and video, in an
appropriate manner relative to other data
traffic. A good network design will implement
quality of service (QoS).
• Priority queuing has four queues. The high-
priority queue is always emptied first.
17.2 Small Network
Applications and Protocols
Small Network Applications and Protocols
Common Applications
After you have set it up, your network still needs certain types of applications and
protocols in order to work. The network is only as useful as the applications that are on it.
There are two forms of software programs or processes that provide access to the
network:
• Network Applications: Applications that implement application layer protocols and
are able to communicate directly with the lower layers of the protocol stack.
• Application Layer Services: For applications that are not network-aware, the
programs that interface with the network and prepare the data for transfer.
Common Protocols
Network protocols support the applications and services used by employees in a small network.
• Network administrators commonly require access to network devices and servers. The two
most common remote access solutions are Telnet and Secure Shell (SSH).
• Hypertext Transfer Protocol (HTTP) and Hypertext Transfer Protocol Secure (HTTP) are
used between web clients and web servers.
• Simple Mail Transfer Protocol (SMTP) is used to send email, Post Office Protocol (POP3) or
Internet Mail Access Protocol (IMAP) are used by clients to retrieve email.
• File Transfer Protocol (FTP) and Security File Transfer Protocol (SFTP) are used to
download and upload files between a client and an FTP server.
• Dynamic Host Configuration Protocol (DHCP) is used by clients to acquire an IP
configuration from a DHCP Server.
• The Domain Name Service (DNS) resolves domain names to IP addresses.
Note: A server could provide multiple network services. For instance, a server could be an
email, FTP and SSH server.
Common Protocols (Cont.)
These network protocols comprise the fundamental toolset of a network professional,
defining:
• Processes on either end of a communication session.
• Types of messages.
• Syntax of the messages.
• Meaning of informational fields.
• How messages are sent and the expected response.
• Interaction with the next lower layer.
Many companies have established a policy of using secure versions (e.g., SSH, SFTP,
and HTTPS) of these protocols whenever possible.
Voice and Video Applications
• Businesses today are increasingly using IP telephony and streaming media to communicate
with customers and business partners, as well as enabling their employees to work
remotely.
• The network administrator must ensure the proper equipment is installed in the network and
that the network devices are configured to ensure priority delivery.
• The factors that a small network administrator must consider when supporting real-time
applications:
• Infrastructure - Does it have the capacity and capability to support real-time
applications?
• VoIP - VoIP is typically less expensive than IP Telephony, but at the cost of quality and
features.
• IP Telephony - This employs dedicated servers form call control and signaling.
• Real-Time Applications - The network must support Quality of Service (QoS)
mechanisms to minimize latency issues. Real-Time Transport Protocol (RTP) and Real-
Time Transport Control Protocol (RTCP) and two protocols that support real-time
applications.
17.3 Scale to Larger
Networks
Scale to Larger Networks
Small Network Growth
Growth is a natural process for many small businesses, and their networks must grow
accordingly. Ideally, the network administrator has enough lead-time to make intelligent
decisions about growing the network in alignment with the growth of the company.
To scale a network, several elements are required:

• Network documentation - Physical and logical topology
• Device inventory - List of devices that use or comprise the network
• Budget - Itemized IT budget, including fiscal year equipment purchasing budget
• Traffic analysis - Protocols, applications, and services and their respective traffic
requirements should be documented
These elements are used to inform the decision-making that accompanies the scaling of a
small network.
Protocol Analysis
It is important to understand the type of traffic that is crossing the network as well as the
current traffic flow. There are several network management tools that can be used for this
purpose.
To determine traffic flow patterns, it is important to do the following:

• Capture traffic during peak utilization times to get a good representation of the
different traffic types.
• Perform the capture on different network segments and devices as some traffic will be
local to a particular segment.
• Information gathered by the protocol analyzer is evaluated based on the source and
destination of the traffic, as well as the type of traffic being sent.
• This analysis can be used to make decisions on how to manage the traffic more
efficiently.
Employee Network Utilization
Many operating systems provide built-in tools to display such network utilization information.
These tools can be used to capture a “snapshot” of information such as the following:
• OS and OS Version
• CPU utilization
• RAM utilization
• Drive utilization
• Non-Network applications
• Network applications
Documenting snapshots for employees in a small network over a period of time is very useful to
identify evolving protocol requirements and associated traffic flows.
17.4 Verify Connectivity
Verify Connectivity
Verify Connectivity with Ping
Whether your network is small and new, or you are scaling an existing network, you will
always want to be able to verify that your components are properly connected to each other
and to the internet.
• The ping command, available on most operating systems, is the most effective way to
quickly test Layer 3 connectivity between a source and destination IP address.
• The ping command uses the Internet Control Message Protocol (ICMP) echo (ICMP Type
8) and echo reply (ICMP Type 0) messages.
Verify Connectivity
Verify Connectivity with Ping (Cont.)
On a Windows 10 host, the ping command sends four consecutive ICMP echo messages
and expects four consecutive ICMP echo replies from the destination. The IOS ping sends
five ICMP echo messages and displays an indicator for each ICMP echo reply received.
IOS Ping Indicators are as follows:

Element Description
•Exclamation mark indicates successful receipt of an echo reply message.
!
•It validates a Layer 3 connection between source and destination.
•A period means that time expired waiting for an echo reply message.
.
•This indicates a connectivity problem occurred somewhere along the path.
•Uppercase U indicates a router along the path responded with an ICMP Type 3 “destination unreachable”
error message.
U
•Possible reasons include the router does not know the direction to the destination network or it could not
find the host on the destination network.
Note: Other possible ping replies include Q, M, ?, or &. However, the meaning of these are out of scope for this module.
Verify Connectivity
Extended Ping
The Cisco IOS offers an "extended" mode
of the ping command.
Extended ping is entered in privileged

EXEC mode by typing ping without a
destination IP address. You will then be
given several prompts to customize the
extended ping.
Note: Pressing Enter accepts the

indicated default values. The ping
ipv6 command is used for IPv6 extended
pings.
Verify Connectivity
Verify Connectivity with Traceroute
The ping command is useful to quickly determine if there is a Layer 3 connectivity problem.
However, it does not identify where the problem is located along the path.
• Traceroute can help locate Layer 3 problem areas in a network. A trace returns a list of
hops as a packet is routed through a network.
• The syntax of the trace command varies between operating systems.
Verify Connectivity
Verify Connectivity with Traceroute (Cont.)
• The following is a sample output of tracert command on a Windows 10 host.
Note: Use Ctrl-C to interrupt a tracert in Windows.
• The only successful response was from the gateway on R1. Trace requests to the
next hop timed out as indicated by the asterisk (*), meaning that the next hop router
did not respond or there is a failure in the network path. In this example there appears
to be a problem between R1 and R2.
Verify Connectivity
Verify Connectivity with Traceroute (Cont.)
The following are sample outputs of traceroute command from R1:
• On the left, the trace validated that it could successfully reach PC B.

• On the right, the 10.1.1.10 host was not available, and the output shows asterisks
where replies timed out. Timeouts indicate a potential network problem.
• Use Ctrl-Shift-6 to interrupt a traceroute in Cisco IOS.
Note: Windows implementation of traceroute (tracert) sends ICMP Echo Requests. Cisco IOS and
Linux use UDP with an invalid port number. The final destination will return an ICMP port
unreachable message.
Verify Connectivity
Extended Traceroute
Like the extended ping command, there is also an extended traceroute command. It
allows the administrator to adjust parameters related to the command operation.
The Windows tracert command allows the input of several parameters through options in
the command line. However, it is not guided like the extended traceroute IOS command.
The following output displays the available options for the Windows tracert command:
Verify Connectivity
Extended Traceroute (Cont.)
• The Cisco IOS extended traceroute option enables
the user to create a special type of trace by
adjusting parameters related to the command
operation.
• Extended traceroute is entered in privileged EXEC
mode by typing traceroute without a destination IP
address. IOS will guide you through the command
options by presenting a number of prompts related
to the setting of all the different parameters.
• Note: Pressing Enter accepts the indicated default

values.
Verify Connectivity
Network Baseline
• One of the most effective tools for monitoring and troubleshooting network performance
is to establish a network baseline.
• One method for starting a baseline is to copy and paste the results from an executed
ping, trace, or other relevant commands into a text file. These text files can be time
stamped with the date and saved into an archive for later retrieval and comparison.
• Among items to consider are error messages and the response times from host to host.
• Corporate networks should have extensive baselines; more extensive than we can
describe in this course. Professional-grade software tools are available for storing and
maintaining baseline information.
17.5 Host and IOS
Commands
IP Configuration on a Windows Host
In Windows 10, you can access the IP address details from the Network and Sharing Center to
quickly view the four important settings: address, mask, router, and DNS. Or you can issue
the ipconfig command at the command line of a Windows computer.
• Use the ipconfig /all command to view the MAC address, as well as a number of details
regarding the Layer 3 addressing of the device.
• If a host is configured as a DHCP client, the IP address configuration can be renewed using
the ipconfig /release and ipconfig /renew commands.
• The DNS Client service on Windows PCs also optimizes the performance of DNS name
resolution by storing previously resolved names in memory. The ipconfig
/displaydns command displays all of the cached DNS entries on a Windows computer system.
IP Configuration on a Linux Host
• Verifying IP settings using the GUI on a Linux
machine will differ depending on the Linux
distribution and desktop interface.
• On the command line, use
the ifconfig command to display the status of
the currently active interfaces and their IP
configuration.
• The Linux ip address command is used to
display addresses and their properties. It can
also be used to add or delete IP addresses.
Note: The output displayed may vary depending

on the Linux distribution.
IP Configuration on a macOS Host
• In the GUI of a Mac host, open Network
Preferences > Advanced to get the IP
addressing information.
• The ifconfig command can also be used
to verify the interface IP configuration at
the command line.
• Other useful macOS commands to verify
the host IP settings include networksetup
-listallnetworkservices and
the networksetup -getinfo <network
service>.
The arp Command
The arp command is executed from the Windows, Linux, or Mac command prompt. The
command lists all devices currently in the ARP cache of the host.
• The arp -a command displays the known IP address and MAC address binding. The
ARP cache only displays information from devices that have been recently accessed.
• To ensure that the ARP cache is populated, ping a device so that it will have an entry
in the ARP table.
• The cache can be cleared by using the netsh interface ip delete
arpcache command in the event the network administrator wants to repopulate the
cache with updated information.
Note: You may need administrator access on the host to be able to use the netsh
interface ip delete arpcache command.
Common show Commands Revisited
Command Description
show running-config Verifies the current configuration and settings
show interfaces Verifies the interface status and displays any error messages
show ip interface Verifies the Layer 3 information of an interface
show arp Verifies the list of known hosts on the local Ethernet LANs
show ip route Verifies the Layer 3 routing information
show protocols Verifies which protocols are operational
show version Verifies the memory, interfaces, and licenses of the device
The show cdp neighbors Command
CDP provides the following information about each CDP neighbor device:
• Device identifiers - The configured host name of a switch, router, or other device
• Address list - Up to one network layer address for each protocol supported
• Port identifier - The name of the local and remote port in the form of an ASCII character
string, such as FastEthernet 0/0
• Capabilities list - Whether a specific device is a Layer 2 switch or a Layer 3 switch
• Platform - The hardware platform of the device.
The show cdp neighbors detail command reveals the IP address of a neighboring device.
The show ip interface brief Command
One of the most frequently used commands is the show ip interface brief command.
This command provides a more abbreviated output than the show ip
interface command. It provides a summary of the key information for all the network
interfaces on a router.
17.6 Troubleshooting
Methodologies
Troubleshooting Methodologies
Basic Troubleshooting Approaches
Step Description
•This is the first step in the troubleshooting process.

Step 1. Identify the Problem •Although tools can be used in this step, a conversation with the user is often
very helpful.
Step 2. Establish a Theory of Probable •After the problem is identified, try to establish a theory of probable causes.
Causes •This step often yields more than a few probable causes to the problem.
•Based on the probable causes, test your theories to determine which one is
the cause of the problem.
Step 3. Test the Theory to Determine
•A technician may apply a quick fix to test and see if it solves the problem.
Cause
•If a quick fix does not correct the problem, you might need to research the
problem further to establish the exact cause.
Step 4. Establish a Plan of Action and After you have determined the exact cause of the problem, establish a plan of
Implement the Solution action to resolve the problem and implement the solution.
Step 5. Verify Solution and Implement •After you have corrected the problem, verify full functionality.
Preventive Measures •If applicable, implement preventive measures.
•In the final step of the troubleshooting process, document your findings,
Step 6. Document Findings, Actions,
actions, and outcomes.
and Outcomes
•This is very important for future reference.
Resolve or Escalate?
• In some situations, it may not be possible to resolve the problem immediately. A
problem should be escalated when it requires a manager decision, some specific
expertise, or network access level unavailable to the troubleshooting technician.
• A company policy should clearly state when and how a technician should escalate a
problem.
The debug Command
• The IOS debug command allows the administrator to display OS process, protocol, mechanism
and event messages in real-time for analysis.
• All debug commands are entered in privileged EXEC mode. The Cisco IOS allows for narrowing
the output of debug to include only the relevant feature or subfeature. Use debug commands only
to troubleshoot specific problems.
• To list a brief description of all the debugging command options, use the debug ? command in
privileged EXEC mode at the command line.
• To turn off a specific debugging feature, add the no keyword in front of the debug command
• Alternatively, you can enter the undebug form of the command in privileged EXEC mode.
• To turn off all active debug commands at once, use the undebug all command.
• Be cautious using some debug commands, as they may generate a substantial amount of output
and use a large portion of system resources. The router could get so busy
displaying debug messages that it would not have enough processing power to perform its
network functions, or even listen to commands to turn off debugging.
The terminal monitor Command
• debug and certain other IOS
message output is not automatically
displayed on remote connections.
This is because log messages are
prevented from being displayed on
vty lines.
• To display log messages on a
terminal (virtual console), use
the terminal monitor privileged
EXEC command. To stop logging
messages on a terminal, use
the terminal no monitor privileged
EXEC command.
17.7 Troubleshooting
Scenarios
Troubleshooting Scenarios
Duplex Operation and Mismatch Issues
• Interconnecting Ethernet interfaces must operate in the same duplex mode for best
communication performance and to avoid inefficiency and latency on the link.
• The Ethernet autonegotiation feature facilitates configuration, minimizes problems and
maximizes link performance between two interconnecting Ethernet links. The
connected devices first announce their supported capabilities and then choose the
highest performance mode supported by both ends.
• If one of the two connected devices is operating in full-duplex and the other is
operating in half-duplex, a duplex mismatch occurs. While data communication will
occur through a link with a duplex mismatch, link performance will be very poor.
• Duplex mismatches are typically caused by a misconfigured interface or in rare
instances by a failed autonegotiation. Duplex mismatches may be difficult to
troubleshoot as the communication between devices still occurs.
IP Addressing Issues on IOS Devices
• Two common causes of incorrect IPv4 assignment are manual assignment mistakes or DHCP-
related issues.
• Network administrators often have to manually assign IP addresses to devices such as servers
and routers. If a mistake is made during the assignment, then communications issues with the
device are very likely to occur.
• On an IOS device, use the show ip interface or show ip interface brief commands to verify what
IPv4 addresses are assigned to the network interfaces. For example, issuing the show ip
interface brief command as shown would validate the interface status on R1.
IP Addressing Issues on End Devices
• On Windows-based machines, when the device cannot contact a DHCP server, Windows
will automatically assign an address belonging to the 169.254.0.0/16 range. This feature is
called Automatic Private IP Addressing (APIPA).
• A computer with an APIPA address will not be able to communicate with other devices in the
network because those devices will most likely not belong to the 169.254.0.0/16 network.
• Note: Other operating systems, such Linux and OS X, do not use APIPA.
• If the device is unable to communicate with the DHCP server, then the server cannot assign
an IPv4 address for the specific network and the device will not be able to communicate.
• To verify the IP addresses assigned to a Windows-based computer, use
the ipconfig command.
Default Gateway Issues
• The default gateway for an end device is the closest networking device, belonging to the
same network as the end device, that can forward traffic to other networks. If a device has
an incorrect or nonexistent default gateway address, it will not be able to communicate with
devices in remote networks.
• Similar to IPv4 addressing issues, default gateway problems can be related to
misconfiguration (in the case of manual assignment) or DHCP problems (if automatic
assignment is in use).
• To verify the default gateway on Windows-based computers, use the ipconfig command.
• On a router, use the show ip route command to list the routing table and verify that the
default gateway, known as a default route, has been set. This route is used when the
destination address of the packet does not match any other routes in its routing table.
Troubleshooting DNS Issues
• It is common for users to mistakenly relate the operation of an internet link to the availability of the
DNS.
• DNS server addresses can be manually or automatically assigned via DHCP.
• Although it is common for companies and organizations to manage their own DNS servers, any
reachable DNS server can be used to resolve names.
• Cisco offers OpenDNS which provides secure DNS service by filtering phishing and some malware
sites. OpenDNS addresses are 208.67.222.222 and 208.67.220.220. Advanced features such as
web content filtering and security are available to families and businesses.
• Use the ipconfig /all as shown to verify which DNS server is in use by the Windows computer.
• The nslookup command is another useful DNS troubleshooting tool for PCs. With nslookup a
user can manually place DNS queries and analyze the DNS response.

Module 17 - Build A Small Network

Uploaded by

Copyright:

Available Formats

Module 17 - Build A Small Network

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Module 17 - Build A Small Network

Uploaded by

Copyright:

Available Formats

Module 17: Build a Small

Devices in a Small Network Identify the devices used in a small network.

Troubleshooting Methodologies Describe common network troubleshooting methodologies.

Troubleshooting Scenarios Troubleshoot issues with devices in the network.

Factors that must be considered when selecting network devices include:

It is recommended that you plan, document, and maintain an IP addressing scheme

Redundancy can be accomplished by

To scale a network, several elements are required:

To determine traffic flow patterns, it is important to do the following:

IOS Ping Indicators are as follows:

Extended ping is entered in privileged

Note: Pressing Enter accepts the

• On the left, the trace validated that it could successfully reach PC B.

• Note: Pressing Enter accepts the indicated default

Note: The output displayed may vary depending

show running-config Verifies the current configuration and settings

show ip interface Verifies the Layer 3 information of an interface

show ip route Verifies the Layer 3 routing information

show protocols Verifies which protocols are operational

•This is the first step in the troubleshooting process.

You might also like