LDDS-H: DC-DC Constant Current Step-Down LED Driver

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

DC-DC Constant Current Step-Down LED driver LDDS-H series

(Track adapter application)

■ Features ■ Applications
DC/DC step-down converter DC battery source lighting
Constant current output: 250mA to 1000mA Portable lighting
Wide input voltage: 12 ~ 56VDC(48V typ.) Commercial lighting
Wide output LED forward string voltage: 2 ~ 45VDC DC 48V Track lighting
High efficiency up to 96% DC 24V landscape lighting
Built-in EMI filter, comply with BS EN/EN55015 For STUCCHI track adapters
3 in 1 dimming and remote ON/OFF control.
For class Ⅲ application(SELV)
Protections: Short circuit / Over temperature / Over current
Cooling by free air convection
Compact size and Fully encapsulated
Suitable for driving illumination LED
5 years warranty

■ Description
LDDS-H series is a 45W DC/DC LED drive featuring constant current output. LDDS-H operates from
12~56VDC and offers models with different rated current ranging between 250mA and 1000mA. With the
high efficiency up to 96%, The 94V-0 flame retardant plastic case with fully-potted to enhance th heat
dissipation allows this series to fit for class Ⅲ commercial track light or DC bus lighting application.

■ Model Encoding
LDDS - 250 H W B

{ Blank: Remote ON/OFF control


B: 3 in 1 Dimming function
W: Wire style
Output current (250/300/350/500/700/1000mA)
Series name
File Name:LDDS-H-SPEC 2021-11-24
DC-DC Constant Current Step-Down LED driver LDDS-H series

SPECIFICATION
ORDER NO. LDDS-250HW LDDS-300HW LDDS-350HW LDDS-500HW LDDS-700HW LDDS-1000HW

CURRENT RANGE 250mA 300mA 350mA 500mA 700mA 1000mA

VOLTAGE RANGE Note.4 2 ~ 45VDC

CURRENT ACCURACY (Typ.) ±5% at 48VDC input (or 24VDC)


OUTPUT
RIPPLE & NOISE(max.) Note.2 150mVp-p 150mVp-p 200mVp-p 350mVp-p 350mVp-p 350mVp-p

SWITCHING FREQENCY 40KHz ~ 1000KHz

EXTERNAL CAPACITANCE LOAD (max.) 2.2uF

VOLTAGE RANGE 12 ~ 56VDC

EFFICIENCY (Typ.) Note.3 94% 95% 96%

INPUT Full load Note.3 200mA 250mA 300mA 400mA 570mA 820mA
DC CURRENT
No load 6mA

FILTER Capacitor

Leave open if not use

REMOTE Power ON with dimming: DIM ~ -Vin >2.5 ~ 15VDC or open circuit
REMOTE ON/OFF
ON/OFF
& Power OFF : DIM ~ -Vin < 0.3VDC or short
3 IN 1
DIMMING PWM FREQUENCY 100 ~ 1KHz (4mA at PWM dimming off)

3 IN 1 DIMMING 0 ~ 10V / PWM / Resistor Dimming

Regulated at rated output current


SHORT CIRCUIT
Protection type: Can be continued, recovers automatically after fault condition is removed
PROTECTION
Tj 150℃ typically(IC1) detect on main control IC
OVER TEMPERATURE
Protection type : Shut down, recovers automatically after temperature goes down

WORKING TEMP. -40 ~ + 55℃(Refer to derating curve) @ full load

WORKING HUMIDITY 20% ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY -55 ~ +125℃, 10 ~ 95% RH


ENVIRONMENT
TEMP. COEFFICIENT ±0.03% / ℃

VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

OPERATING CASE TEMP. (max.) 90℃

SAFETY STANDARDS EAC TP TC 020/2011 approved


SAFETY &
EMC EMC EMISSION Compliance to BS EN/EN55015, EAC TP TC 020

EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020

MTBF 650Khrs min. MIL-HDBK-217F (25℃)

DIMENSION 47*12*7mm or 1.85"*0.47"*0.28" inch (L*W*H)


OTHERS
WEIGHT 9.5g, 36pcs/box, 0.43kg/box. 12 box per carton/6kg

POTTING MATERIAL Expoxy(UL94-V0)


1.All parameters are specified at normal input(48VDC), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf capacitor.
NOTE 3.Test condition: 48VDC input, 36VDC output without Dimming.
4.Output voltage will always step down 4 volts from input DC voltage.
5.The output of LDDS-H should not be connected to the input of the same unit or output from other sources.
※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

File Name:LDDS-H-SPEC 2021-11-24


DC-DC Constant Current Step-Down LED driver LDDS-H series

Derating Curve

100
LOAD (%)

75
for 250~700mA

50 for 1000mA

25

-40 0 25 40 50 55 85 100

Ta (℃)

Standard Application(LDDS-HW series)(Remote ON/OFF control)

100
+VIN +Vout
1st LED 80

Output Current (%)


LDDS-H
Last LED 60
-VIN Dimming -Vout
40
10V(H) H: >2.5~15VDC or open circuit
0V(L) L: <0.3VDC or short 20

0 0.5 1 1.5 2 2.5 6 7 8 10

Input voltage (V)


3 in 1 Dimming Control(LDDS-HWB series)

◎ Applying additive 10VDC PWM signal


100

+VIN +Vout 80
Output Current (%)

1st LED
LDDS-H
60
Last LED

-VIN Dimming -Vout 40

10V(H)
20
0V(L)
(PWM signal 100~1KHz)
0 1 10 20 30 40 50 60 70 80 90 100
(DIM to OFF)
Dimming Duty Ratio (%)

◎ Applying additive 0~10VDC


100

80
Output Current (%)

+VIN +Vout
1st LED
60
LDDS-H
Last LED
40
-VIN Dimming -Vout

20
0V-10V

0 1 2 3 4 5 6 7 8 9 10
(DIM to OFF)
Input voltage (V )

◎ Applying additive resistance


100

80
Output Current (%)

+VIN +Vout
1st LED
LDDS-H 60
Last LED
40
-VIN Dimming -Vout

20

(0~50KΩ) 0 5 10 15 20 25 30 35 40 45 50
(DIM to OFF)
(Dimming source current from power supply:200μA) Dimming Resistor (KΩ)

File Name:LDDS-H-SPEC 2021- 11-24


DC-DC Constant Current Step-Down LED driver LDDS-H series

Efficiency VS Output Voltage(Number of LEDs)

OUTPUT CURRENT 250mA OUTPUT CURRENT 300mA

100.0 100.0

95.0
95.0
90.0
90.0
85.0
EFFICIENCY(%)

85.0

EFFICIENCY(%)
80.0
80.0
75.0
75.0
70.0

65.0 70.0

60.0 65.0

55.0 60.0
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
LOAD LED (S) LOAD LED (S)
VIN=24V VIN=48V VIN=24V VIN=48V

OUTPUT CURRENT 350mA OUTPUT CURRENT 500mA

100.0 100.0

95.0 95.0

90.0 90.0

85.0 85.0
EFFICIENCY(%)
EFFICIENCY(%)

80.0 80.0

75.0 75.0

70.0 70.0

65.0 65.0

60.0 60.0
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
LOAD LED (S) LOAD LED (S)
VIN=24V VIN=48V VIN=24V VIN=48V

OUTPUT CURRENT 700mA OUTPUT CURRENT 1000mA

100.0 100.0

95.0 95.0

90.0 90.0

85.0 85.0
EFFICIENCY(%)
EFFICIENCY(%)

80.0 80.0

75.0 75.0

70.0 70.0

65.0 65.0

60.0 60.0
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
LOAD LED (S) LOAD LED (S)
VIN=24V VIN=48V VIN=24V VIN=48V

File Name:LDDS-H-SPEC 2021-11-24


DC-DC Constant Current Step-Down LED driver LDDS-H series

Mechanical Specification Pin Configuration


Unit: mm (inch)

3±1mm 50±10mm 7 [0.28]

1 2 Pin No. Comment

1 -Vin Don't connect


(Black) to -Vout
SIDE +Vin DC Supply
BOTTOM 2
VI EW (Red)
VI EW
3 DIM(-)
Connect to -Vin
(Black)
3±1mm 150±10mm ON/OFF control
30 [1.18]
47 [1.85]

DIM(+)
4 (White) or
3 in 1 Dimming
5 6
+Vout LED + Connection
5
(Yellow)

6 -Vout
LED - Connection
4 [ 0.16]

(Blue)

3 [0.12]

3 4

12 [0.47]

NOTE: All wires UL3385 22AWG/300V/105℃ rated

File Name:LDDS-H-SPEC 2021-11-24

You might also like