A customer needs Layer 2 switches that provide basic functionality.

In the future, this

customer might need to use the switches' CLI to configure VLAN and STP features. Which
category of the switches does meet the customer's needs? - managed

You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels? - To
maximize performance, balance the total memory capacity across all installed processors, and
load the channels similarly

QUESTION NO: 4
A customer needs to know if the storage solution you proposed contains components that are
compatible with existing products currently in the data center.
Which HPE resource should you use to provide this information? - Single Point of
Connectivity Knowledge (SPOCK)

QUESTION NO: 5
You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of
all the system health and configuration information in a single web interface.
IT Certification Guaranteed, The Easy Way!
Which HPE tool should you use? - System Management Homepage

QUESTION NO: 6
A customer is considering an upgrade of their network, which connects 10 servers. The
customer has a converged data center networking architecture with Layer 2 and Layer 3
functionality.
Which HPE product family will meet this customer's needs? - FlexFabric

QUESTION NO: 7
A customer needs to enable HPE Proactive Care and automated case creation for server
hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks? - Enable remote
support from the Settings page.

QUESTION NO: 8
You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of
solution, including a list of all the hardware and software components? - Reference
Architecture

QUESTION NO: 9
You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans
constantly run at 100%.
Which action should you take first? - Reseat drive blanks

QUESTION NO: 10
You need to install 10 HPE ProLiant servers in an environment without DHCP. Which tool
can you use to set up remote management? - Intelligent Management Center

QUESTION NO: 11
A customer needs to create a large RAID set for archive storage on large-capacity drives.
Which RAID level is recommended for this customer? - RAID 6
QUESTION NO: 12
ou are designing a system for a customer that runs an OLTP application. The customer has
SAN based storage.
They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs? - intelligent
system tuning

QUESTION NO: 13
A customer is building out their rack of servers and storage systems. They need a high-
performance network with a simple centralized management capability and deep buffer
support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer's needs? - FlexFabric

QUESTION NO: 14
A customer needs to centralize their backup environment for their branch office They plan to
use HPE StoreOnce with catalyst What should they implement within their backups software
to minimize the network load on the remote site? - source-side deduplication

QUESTION NO: 16
A customer needs to connect two switches without VLANs or Spanning Tree. To which mode
should the switches be set? - Gateway Mode

QUESTION NO: 17
You have completed a non-disruptive activation of firmware on an SN6000 switch. Which
session must be restarted manually? - telnet session

QUESTION NO: 18
You are installing a combined server and storage solution at a customer location. What must
you keep in mind regarding the typical requirements for the location? (Choose two.) - A.
Room temperature must not exceed 35 °C (95 °F)

D. There must be at least a 10 cm (4 in) clearance space at the front and back of the
components within the racks

QUESTION NO: 19
A customer wants to safeguard their server firmware and asks you about the HPE ProLiant
Gen10 features that provide this level of security.
Which Gen10 feature best addresses the customer's concern? - Gen10 servers use silicon root
of trust to validate and detect corrupted firmware, and authentication to block unauthorized
updates.

QUESTION NO: 20
You plan to perform maintenance on several systems in a rack. You need to ensure that the
rack does not tip when you are working on the equipment.
What should you use? - stabilizer kit

QUESTION NO: 21
What can you do when installing an HPE switch to provide protection from electrostatic
discharge? - Connect the switch grounding cable correctly.
QUESTION NO: 22
A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer's needs? - StoreVirtual VSA

QUESTION NO: 23
A customer is planning an upgrade to their network infrastructure. They want to move to an
open networking solution, and they want to install a network switch that supports their choice
of network operating system.
Which HPE product family will meet the customer's needs? - Altoline

QUESTION NO: 24
You are configuring an internal Smart Array controller on an HPE ProLiant server. Which
statement is true regarding the drives in the logical array? - HDDs and SSDs cannot be mixed
in the same logical array.

QUESTION NO: 25
A company plans to purchase new HPE servers. The company needs to maximize local
storage capacity within the servers.
Which HPE servers should the company install? - ProLiant DL380 Gen10

QUESTION NO: 26
A Nimble storage customer is experiencing rapid data growth and needs to scale their storage
resources.
IT Certification Guaranteed, The Easy Way!
Which action should the customer take first? - Access InfoSight for recommendations

QUESTION NO: 27
When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.) - A. It
should be filled with blanking panels.
B. It does not provide correct rack airflow.

QUESTION NO: 28
You are installing an HPE StoreOnce backup system in a customer's environment. They need
a simple and cost-effective method to centralize and automate the backup of multiple servers
(file, virtualization, database).
They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer's requirements? - VTL
device

QUESTION NO: 29
A customer is planning to purchase new MPE rack-mount servers for their data center. The
customer has an exist storage environment and wants to minimize required rack space and
local storage.
Which HPE server should they install? - ProLiant DL360 Gen 10

QUESTION NO: 30
You are installing an HPE ProLiant server in a rack at a customer site. The customer's facility
is in a high-voltage utility service area, and they want to be certain that the power supply is
supported.
IT Certification Guaranteed, The Easy Way!
 Which ProLiant feature addresses the customer's concern? - ProLiant servers include auto-
sensing power supplies with a power input range of 100-240 VAC, so they can be used
globally.

QUESTION NO: 31
You are onsite at a customer location to install a new network switch. The customer wants
users to be able to manage the switch through the IP network.
How should you connect the switch to the network? - Configure the management IP address
on the switch and enable Telnet or SSH access

QUESTION NO: 32
A customer has a HPE OneView environment and has added all their HPE ProLiant servers
and enclosures.
Which benefits does a customer gain by configuring Remote Support on their environment?
(Choose two.) - C. HPE Proactive Care is enabled and cases are created automatically in the
event of hardware failures
D. Proactive Scan reports and firmware/software analysis reports can be provided from
collected data

QUESTION NO: 34
A customer needs a solution that supports rapid provisioning changes on physical bare-metal
servers and on a virtualization hypervisor. They are considering migrating to a new solution
that supports software-defined storage.
Which HPE compute platform should the customer implement? - Synergy

QUESTION NO: 36
A customer requires a recovery strategy that provides multiple rollback points during the day
for their Microsoft SQL database. The customer needs to be able to recover data instantly.
Which method meets this requirement? - snapshot

QUESTION NO: 37
A customer requires an entry-level, all-flash system with predictable performance at the
lowest possible price.
They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer's requirements? - Nimble SFA

QUESTION NO: 38
A customer is upgrading their network infrastructure to provide the best performance for IP
storage.
Which technologies in a network switch meet the customer's needs? (Choose three.) - A.
Jumbo Frames
B. Deep Packet Buffers
D. MLAG Support

QUESTION NO: 39
A customer requires an entry-level, all-flash storage system with predictable performance at
the lowest possible price. They have performance-sensitive workloads that require speed and
efficiency.
Which HPE storage system meets the customer's requirements? - A. 3PAR 8450

QUESTION NO: 40
A customer needs to reconfigure their data center network because their network often
becomes congested, and the customer cannot monitor the network.
How should the customer configure their network? - A. Isolate the management network from
production traffic

QUESTION NO: 41
A customer plans to use HPE ProLiant servers for an application that requires low latency for
all components.
Which workload profile should the customer use? - Mission Critical

QUESTION NO: 42
A customer requires a storage platform for their department data. They have a limited budget
and will be sharing files among their Microsoft Windows environment.
Which HPE storage platform meets the customer's needs? - StoreEasy

QUESTION NO: 43
A customer is standardized on high-density, rack-mounted servers. They have an application
that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.
What is the highest-density server that meets these customer requirements? - DL380 Gen10

QUESTION NO: 44
You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support
has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.) - D. all external storage media
E. redundant processors

QUESTION NO: 45
A customer has an existing environment that contains a mixture of network vendors. The
customer wants to manage all devices using a single interface.
What should the customer use to manage the devices? - Intelligent Management Center

QUESTION NO: 46
A customer needs to increase the availability and bandwidth of network connectivity to their
servers.
Which switch feature meets the customer's needs? - Link Aggregation and Control Protocol
(LACP)

QUESTION NO: 47
You are installing multiple components into an existing server.
Which HPE resource can you use to verify the compatibility of the server hardware options
with the server? - B. Server User Guide

E. SPOCK

QUESTION NO: 48
You are working in a data center with multiple servers and need to update the iLO 5 user
names and passwords on a regular basis.
Which tool enables you to streamline and automate this process? - iLO Amplifier Pack

QUESTION NO: 49
A customer requires 12 Gb local storage for their VMware boot volumes, which require high-
performance read cycles to enable the operating system to boot quickly.
Which drive type provides the most appropriate size and most cost-effective way to meet this
requirement? - Flash media drive

QUESTION NO: 50
A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel
storage for their VMware environment.
How would this customer benefit from adding 16 Gb Fibre Channel storage to their
environment? (Choose two.) - A. increased performance

D. reduced latency

QUESTION NO: 55
You are installing additional components to a server.
Which HPE resource provides Quickspecs that verify the compatibility of the server hardware
with the server? - Product Bulletin

QUESTION NO: 56
You are configuring a FlexFabric switch for a customer environment. The customer has
requested specific SFP+ transceivers, power options, and cables.
Which HPE tool enables you to select and configure a switch according to precise
specifications? - One Config Simple (OCS)

QUESTION NO: 57
Which two HPE applications are installed on Windows operating systems with intelligent
Provisioning?
(Choose two.) - A. Lights-Out Online Configuration Utility

E. Smart Storage Administrator

QUESTION NO: 58
Which tool provides a report on the current usage levels and life span of some installed read-
intensive flash drives? - Smart Storage Administrator

QUESTION NO: 59
A customer has reported that while running an application that is streaming live data, they
experience fluctuations in processor frequency as they increase the server performance.
Which HPE ProLiant Gen10 system tuning feature would help eliminate this issue? - jitter
smoothing

QUESTION NO: 60
You are installing a server solution in a customer's data center.
How can you ensure that the installation complies with relevant electrical best practices?
(Choose two.) - B. Do not allow the overall system AC current load to exceed 80% of the
branch circuit AC current rating

D. Balance the server power load between available AC supply branch circuits

QUESTION NO: 61
A customer requires a MSA storage system that they use for archiving data. The system needs
to provide a large amount of storage.
Which drive type meets the customer's needs? - SATA nearline

QUESTION NO: 62
You are installing a HPE MSA storage system and need to connect the power cooling module
(PCM).
What should you do to ensure power redundancy? - Connect each PCM within a shelf to a
different power distribution unit (PDU)

QUESTION NO: 63
You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests
on local storage.
Which HPE tool should you use? - Intelligent Management Center

QUESTION NO: 64
You are troubleshooting an HPE Proliant ML350 Gen server. You determine that the active
ROM is corrupt and the system has not automatically switched to the redundant ROM. You
need to manually switch the ROM.
What should you do? - Change the position of the system maintenance switch options.

QUESTION NO: 66
A customer needs to share files among their Microsoft Windows servers cost-effectively and
requires disaster support Which native StoreEasy features win address the customer's need?
(select two) recovery - C. Microsoft Azure support
D. Enhanced data deduplication

QUESTION NO: 67
You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You
did not wait for the upgrade to be activated on the first switch before beginning to install the
firmware on the second switch.
What must you do to install the firmware on the second switch? - Perform a hot reset on the
first switch to initiate the installation on the second switch

QUESTION NO: 68
A customer needs to improve throughput performance of iSCSI traffic on their Layer 2
switch. Which feature should the customer implement at the switch level? - Jumbo frames

QUESTION NO: 69
What has HPE implemented in the HPE ProLiant Gen10 to prevent malware? - silicon root of
trust

QUESTION NO: 70
Which HPE tool can you use to ensure a consistent level of firmware exists across all
BladeSystem interconnects and servers in an environment? - OneView

QUESTION NO: 71
A customer wants to decrease problem resolution time on their HPE infrastructure. Why
would this customer benefit from Insight Remote Support? - It provides event diagnosis and
automatic, secure submission of hardware event notifications to HPE.
QUESTION NO: 72
A customer requires a software-defined storage solution. Which storage solution meets the
customer's needs? - HPE StoreVirtual VSA

QUESTION NO: 73
You need to configure a HPE ProLiant server and plan to install an operating system that
supports Secure Boot.
Which system utility should you use to configure the server? - UEFI

QUESTION NO: 74
A customer needs a storage to run a database in an environment with many virtual machines.
You have recommended a HPE MSA 2042 solution, but the customer has reservations about
whether the MSA 2042 can deliver the required performance. Which feature of MSA 2042
will help to improve iOP performance? - optimal flash acceleration

QUESTION NO: 75
A customer has an ESXi server in a branch office They need to perform backups locally. The
local backups must be replicated to the main data center with built-in deduplication What
should the customer install at the branch office? - Storevirtual VSA

QUESTION NO: 76
A customer is planning an upgrade in their data center. The customer needs to deploy on bare-
metal and virtual servers easily through a common interface. In addition, they have expressed
an interest in software-defined storage.\ Which HPE compute platform should you suggest? -
Synergy

QUESTION NO: 77
A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN
switch in each fabric. They plan to expand their virtualization environment by adding two
HPE DL360s and an MSA 2042.
Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042
will connect with four FC Ports. The 24 ports on each switch are currently In use for other
applications.
How many additional Port on demand licenses must be customer purchase for each switch if
they redundantly connect all the new FC HBA ports to their existing SN600B switches? - 8

QUESTION NO: 78
You are installing an HPE ProLiant server that has a shared network port for iLO and NIC
teaming. You need to ensure that you can still access iLO after configuring the NIC team.
Which teaming technology should you configure? - network fault tolerance

QUESTION NO: 79
A company needs a solution that provides SMB and NFS file shares. The solution must have a
built-in data backup to Microsoft Azure.
Which HPE solution meets the customer's needs? - StoreEasy 1000

QUESTION NO: 80
You are creating a logical array on an HPE ProLiant server. The customer asks you to use
drives with different capacities in a single array.
What should you explain to this customer? - The extra capacity of the larger drives will not be
utilized
QUESTION NO: 81
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to
install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency? -
vertically, side by side on both sides of the rack with the outlets facing the center

QUESTION NO: 82
Which component of HPE iLO provides continuous monitoring of more than 1600
parameters? - Active Health System

QUESTION NO: 83
A customer needs to implement VMware across a few racks of servers. They anticipate a
large amount of VM creation and retirement.
What are key technologies in a Top of Rack (ToR) switch that support this environment?
(Choose three.) - A. Smart Rate Support
B. Deep Packet Buffers
E. MLAG support

QUESTION NO: 84
A customer needs to support both network and storage traffic on their network, which
includes Ethernet, iSCSi, and Fibre Channel devices. The customer is concerned about the
large amount of cables coming from the various cards inserted in their rack servers, as well as
the operational costs in their data center.
Which component addresses these issues? - Converged network adapter

QUESTION NO: 85
You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data
from the server, even when it is not operational.
Which tool should you use? - Insight Online

QUESTION NO: 86
You are working on a server, and you notice that the blue UID light on the server is flashing
slowly.
What does this indicate? - The system is being managed remotely

QUESTION NO: 87
You are troubleshooting server issues and need to troubleshoot when online and offline.
Which HPE tool should you use? - Insight Diagnostics

QUESTION NO: 89
When should you use the HPE Switch Selector? - when you need to compare features
between multiple switches

QUESTION NO: 90
What should you install with a server for a customer who may need to perform maintenance
on the server while it is the rack? (Select two.) - A. Cable Management Arm (CMA)
D. rack stabilization kit

QUESTION NO: 91
While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the
current and backup system ROMs are corrupt.
What should be the next step to fix the server? - Replace the system board

QUESTION NO: 92
A customer has an application that consumes 500 GB storage and requires an RTO and PRO
of 15 minutes.
Which backup and recovery technology enables the customer to meet their requirements in
the most cost-effective manner? - disk-to-disk appliance

QUESTION NO: 93
A customer needs to provide inventory management, health monitoring, status alerting, and
reporting for their ProLiant servers.
Which HPE management offering meets the customer's needs? - OneView

QUESTION NO: 94
An administrator is using 4k block sizes on an iSCSI array. The administrator wants to
optimize that packet size to decrease the header overhead in the IP traffic flow.
What feature should be enabled on the entire Layer 2 domain? - Jumbo Frames

QUESTION NO: 95
A customer needs to update firmware and perform diagnostic tests on various components of
a HPE ProLiant server.
Which utility should they use? - Intelligent Provisioning

QUESTION NO: 96
You are provisioning a new virtual disk group on a MSA storage system.
Which disk group parameters must you specify when creating the vdisk? (Choose three.) - A.
RAID level
C. type
E. name

QUESTION NO: 97
A server administrator needs to see the 24-hour history of the power consumed by an installed
HPE ProLiant server.
Which HPE tool can the admin use to gather this information? - iLO

QUESTION NO: 98
You are troubleshooting HPE ProLiant servers for a customer. The customer has granted you
read-only access to HPE OneView. You need to download the audit log from OneView.
Which permission level should the customer give you? - Server administrator

QUESTION NO: 99
You are managing a HPE ProLinat rack-mount server and need to determine when the
Remote Console was most recently used.
Where can you find this information? - iLO

QUESTION NO: 101

You are discussing storage types with a customer that is configuring their NAS solution. The
company's application developers use user-generated media and image files.
For which type of data should this customer use file storage? - Mass storage
QUESTION NO: 102
A customer needs the devices in their non-secure network to communicate in a secure
manner. They are considering implementing Kerberos network authentication in their
environment.
Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers? - It
will enable Zero Sign In to log in to iLO without entering a user name and password.

QUESTION NO: 103

A customer needs a Layer 2 switch that provides basic switch functionality without the need
to use a CLI or a GUI. Which type of switch meets the customer's needs? - unmanaged

QUESTION NO: 104

A customer plans to back up a file server that holds 2 TB of data. The customer wants to
upgrade their network infrastructure to support backup and to implement a datacenter network
solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.) - A.
FlexFabric 5900
E. StoreOnce 3100

QUESTION NO: 105

You need to update the firmware on an MSL2024.
Which HPE utility do you need to use? - Library & Tape Tools

QUESTION NO: 106

You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient
temperature of 45 °C (113 °F).
Which additional option is required? - High Performance Fan Kit

QUESTION NO: 107

In which layer of the OSI model would you find an IP address? - Network

QUESTION NO: 108

A customer has a branch office that needs a local file server. The branch office does not have
a server rack.
For backup performance, the server must have two processors.
Which HPE server should the company install? - ProLiant ML350 Gen10

QUESTION NO: 109

A customer needs to share files cost-effectively among their Microsoft Windows server over a
local network.
Which storage solution meets this requirement? - Network Attached Storage (NAS)

QUESTION NO: 110

You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is
the drive device number set? - The Smart Array controller assigns the device number
automatically based on the bay

QUESTION NO: 111

You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.) - A. Use out-of-
band management with a dedicated management connection
B. Use in-band management with an IP address and subnet mask that is reachable on the
management network

QUESTION NO: 112

You are installing a rack at customer site.
How can you ensure redundant power to the rack? - Connect an uninterruptible power supply
(UPS) to redundant circuit breakers at the facility power source.

QUESTION NO: 113

You are designing a system for a customer that has a contract with a government agency. The
contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer's needs? - CNSA mode

QUESTION NO: 114

A customer needs a Fibre Channel storage solution that supports block storage with the lowest
cost.
Which HPE solution meets this customer's requirements? - HPE MSA

QUESTION NO: 115

Which HPE tool can securely erase current content of a server and help with consistent and
easy operating system installation? - HPE Intelligent Provisioning

QUESTION NO: 116

A customer needs to share files among their Linux-based servers in a cost effective manner.
The customer is concerned about compatibility with the servers in their environment that run
Windows.
Which HPE StoreEasy feature addresses the customer's concerns? - multi-protocol access to
the same file share over SMB and NFS protocols

QUESTION NO: 117

A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up
and running, but the servers cannot mount their LUNs.
Which troubleshooting steps should you prioritize? (Choose two.) - C. Use remote console to
check the switch port configuration
E. Use remote console to ensure correct MSA port configuration

QUESTION NO: 118

A customer needs a video archive repository initially starting at 30TB internal storage. The
repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer's requirements? - HPE ProLiant
DL380 Gen10 with LFF SAS drives

QUESTION NO: 120

You are troubleshooting a HPE ProLiant rack-mount server. You notice that all front-panel
status LEDs flash simultaneously.
What does this indicate has occurred on the server? - a power fault

QUESTION NO: 121

A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they
report that the server is not online. They call you for remote support. The IP address on the
production network cannot be reached. You are evaluating the probable root causes of this
issue.
According to the troubleshooting methodology, what are next two steps? (Select two) - B.
Log in to iLO to see if the server hardware and NIC are online and configured correctly.
D. Run insight Diagnostics on the Server

QUESTION NO: 122

A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The
customer runs a large Oracle database. They need to increase performance and reduce their
licensing costs.
Which feature of HPE Gen10 servers offers these benefits? - core boosting

QUESTION NO: 123

A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The
customer's network administrator has Installed a top of rack 10 GbE switch capable of
supporting copper and optical connections.
The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch? - 3m Direct Attached
Copper Cables

QUESTION NO: 124

You are designing a network for a customer that needs a centrally-managed solution for their
physical and virtual switches. This product must integrate with their existing third-party
networking equipment.
Which HPE management solution meets the customer's needs? - Intelligent Management
Center

QUESTION NO: 125

Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity
drives? - to reduce risk during volume rebuild

QUESTION NO: 126

A customer requires a high level of network bandwidth and reliability. You are installing a
pair of HPE switches that can provide redundancy with multiple connections between them
for high availability and faster throughput.
Which technology should you configure on the switches to enable the capability the customer
requires? - Multichassis Link Aggregation (MLAG)

QUESTION NO: 127

A customer needs to replace an existing storage array. The new array must be suitable for
remote office deployment and support the following:
* Multi-protocol connectivity
* Flash-accelerated storage
* Low-cost midline SAS drives
Which HPE storage platform will meet these requirements? - MSA

QUESTION NO: 128

A customer needs a high level of flexibility and the most efficient use of available capacity in
their MSA storage system.
How should the MSA be configured? - Create multiple virtual volumes in a storage pool to
share resources.

QUESTION NO: 129

A customer is configuring their SAN.
Which types of data typically require block storage? (Choose two.) - B. Microsoft Exchange
C. Oracle database

QUESTION NO: 130

A customer needs to purchase a redundant pair of SAN switches for their virtualization
environment. The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8
Gbps FC host attachments.
Which switch meets the customer's needs at the lowest cost? - HPE StoreFabric SN6010C 12-
port Switch with an On Demand Port Activation License

QUESTION NO: 131

You are creating an internal array on an HPE ProLiant server. What can you do to maximize
the storage space efficiency? - Install drives that have the same capacity.

QUESTION NO: 132

A customer is planning an upgrade to their network. They need to combine multiple existing
switches into one virtual device.
Which technology should the customer configure on their existing switches? - Intelligent
Resilient Framework (IRF)

QUESTION NO: 133

A customer has implemented an HPE ProLiant server with internal storage and needs to
monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize
the possible downtime? - Smart Storage Administrator

QUESTION NO: 134

A customer is enhancing their server and storage virtualization infrastructure. They need to
maximize memory density per rack unit and provide an all-flash array to the environment.
Which HPE solutions should they install to fulfill these requirements (Select two.) - B.
ProLiant ML350 Gen10
E. MSA 2042

QUESTION NO: 135

A customer plans to use HPE ProLiant servers for line-of-business applications. They want to
configure the servers to increase reliability.
Which workload profile should the customer use? - Mission Critical

QUESTION NO: 136

You need to update the firmware on an MSL2024 to version 26.43.51. Which HPE utility do
you need to use? - Library & Tape Tools

QUESTION NO: 137

Which HPE service level offers customers special parts handling and access to onsite service
24x7, including HPE holidays? - Foundation Care 24x7
QUESTION NO: 138
You are troubleshooting a customer's HPE ProLiant rack-mount server. The customer has
configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive.
The server will not boot from the drive.
What should you do? - Set the USB 3.0 mode to Enabled.

QUESTION NO: 139

Which security feature is unique to HPE ProLiant Gen10 servers? - With the silicon root of
trust, Gen10 servers can detect compromised firmware

QUESTION NO: 140

A customer has a small branch office that requires a tower-based server solution. The
customer runs office-based applications and wants lights-out management capability. Which
HPE server family meets the customer's needs? - ProLiant ML