Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    B G192032 Pages:4: Assume Missing Data If Any and State It Answer Any Two Full Questions, Each Carries 15 Marks

    Uploaded by

    irshad
    This document is a 4-page exam for a structural analysis course. It contains 9 questions testing various concepts: 1) Analyzing a frame using the portal method and determining assumptions in the cantilever method. 2) Finding maximum hogging moment and shear force in a frame under gravity loads. 3) Determining kinematic and static indeterminacy of beams and frames. 4) Analyzing a continuous beam using flexibility matrix methods. 5) Establishing the relationship between flexibility and stiffness matrices and explaining lack of fit. 6) Analyzing a truss using stiffness methods and defining direct stiffness methods.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    B G192032 Pages:4: Assume Missing Data If Any and State It Answer Any Two Full Questions, Each Carries 15 Marks

    Uploaded by

    irshad
    15 views4 pages
    This document is a 4-page exam for a structural analysis course. It contains 9 questions testing various concepts: 1) Analyzing a frame using the portal method and determining assumptions in the cantilever method. 2) Finding maximum hogging moment and shear force in a frame under gravity loads. 3) Determining kinematic and static indeterminacy of beams and frames. 4) Analyzing a continuous beam using flexibility matrix methods. 5) Establishing the relationship between flexibility and stiffness matrices and explaining lack of fit. 6) Analyzing a truss using stiffness methods and defining direct stiffness methods.

    Original Title

    2019 Dec. CE403-C - Ktu Qbank

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a 4-page exam for a structural analysis course. It contains 9 questions testing various concepts: 1) Analyzing a frame using the portal method and determining assumptions in the cantilever method. 2) Finding maximum hogging moment and shear force in a frame under gravity loads. 3) Determining kinematic and static indeterminacy of beams and frames. 4) Analyzing a continuous beam using flexibility matrix methods. 5) Establishing the relationship between flexibility and stiffness matrices and explaining lack of fit. 6) Analyzing a truss using stiffness methods and defining direct stiffness methods.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views4 pages

    B G192032 Pages:4: Assume Missing Data If Any and State It Answer Any Two Full Questions, Each Carries 15 Marks

    Uploaded by

    irshad
    This document is a 4-page exam for a structural analysis course. It contains 9 questions testing various concepts: 1) Analyzing a frame using the portal method and determining assumptions in the cantilever method. 2) Finding maximum hogging moment and shear force in a frame under gravity loads. 3) Determining kinematic and static indeterminacy of beams and frames. 4) Analyzing a continuous beam using flexibility matrix methods. 5) Establishing the relationship between flexibility and stiffness matrices and explaining lack of fit. 6) Analyzing a truss using stiffness methods and defining direct stiffness methods.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    B G192032 Pages:4

    Reg No.:_______________ Name:__________________________

    APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY


    SEVENTH SEMESTER B.TECH DEGREE EXAMINATION(R&S), DECEMBER 2019
    Course Code: CE403
    Course Name: STRUCTURL ANALYSIS - III
    Max. Marks: 100 Duration: 3 Hours
    Assume missing data if any and state it
    PART A
    Answer any two full questions, each carries 15 marks. Marks

    1 a) What are the assumptions involved in cantilever method? 3


    b) Analyse the frame in Figure.1 using portal method. Beams and columns have
    same size.

    12

    2 a) Find the maximum hogging moment and shear force at the support due to gravity
    loading in the frame shown in Figure.2. Frames are spaced at 3.0 m c/c. Dead
    load = 3 kN/m2, Live load = 2 kN/m2, Weight of beam = 2 kN/m and storey
    height = 3 m.

    10

    Page 1of 4
    For More Visit : KtuQbank.com
    B G192032 Pages:4

    b) Derive Flexibility matrix for the following beam element in Figure.3.

    3 a) Find the Kinematic indeterminacy and Static indeterminacy of the continuous


    beam ( Figure.4) , pin jointed frame (Figure.5) and rigid frame (Figure.6)

    b) Derive Flexibility matrix for the truss element. 3


    c) Define flexibility coefficient and stiffness coefficient. 3

    PART B
    Answer any two full questions, each carries 15 marks.
    4 a) Analyse the continuous beam shown in Figure.7, using flexibility matrix method
    and find the bending moments.

    15

    Page 2of 4
    For More Visit : KtuQbank.com
    B G192032 Pages:4

    5 a) Establish the relationship between flexibility matrix and stiffness matrix. 4


    b) What is displacement transformation matrix? 5
    c) What is lack of fit? Explain one method to estimate the member forces due to lack
    6
    of fit using either flexibility or stiffness methods.
    6 a) Find the member forces in the truss shown in Figure.8 using stiffness method. 15

    PART C
    Answer any two full questions, each carries 20 marks.
    7 a) Analyse and draw bending moment diagram for the frame shown in Figure.9
    using direct stiffness method.

    17

    b) What is direct stiffness method? 3


    8 a) Differentiate between local coordinates and global coordinates. 4
    b) How global stiffness matrix can be derived from the element stiffness matrix? 6
    c) Describe Vibration Isolation? What are the different types of vibration isolation? 10
    9 a) What is critical damping? 3
    b) What is magnification factor? 3

    Page 3of 4
    For More Visit : KtuQbank.com
    B G192032 Pages:4

    A person standing on a spring produces a deflection of 1.0 mm to the spring. Find


    c) 4
    the natural frequency and Time period.
    d) A vibrating system consists of mass of 10 kg, spring of stiffness 240 N/m and a
    damper with a damper coefficient of 10 N-s/m. Determine
    i) Damping factor
    ii) Natural frequency of damped vibration 10
    iii) Logarithmic decrement
    iv) Ratio of successive amplitudes
    v) Number of cycles after which initial amplitude reduced to 25%
    ****

    Page 4of 4
    For More Visit : KtuQbank.com

    You might also like