Access Control Management Software Suite Guide: Release 6.9

ACCESS CONTROL MANAGEMENT
Software Suite Guide
Release 6.9
Jul,26,2010
Access Control Management Software Suite Guide
CONTENTS
Preface................................................................................................................................................4
Purpose of this Document...........................................................................................................4
Audience......................................................................................................................................4
Part 1 Setup and Remove applications..........................................................................................4
1.1 Setup applications................................................................................................................4
1.1.1 Setup Microsoft.Net..................................................................................................5
1.1.2 Setup Access Control software.................................................................................7
1.2 Remove applications............................................................................................................9
Part 2 Login.....................................................................................................................................11
Part 3 Adding and Editing Basic Configure.................................................................................13
3.1 Add Department.................................................................................................................13
3.2 Add and Edit a Personnel...................................................................................................14
3.3 Import customer's information from Excel........................................................................15
Part 4 Access Control.....................................................................................................................16
4.1 Configuration.....................................................................................................................16
4.1.1 Hardware Configure................................................................................................16
4.1.2 Access Privilege......................................................................................................17
4.1.3 Rename Door..........................................................................................................20
4.1.4 Set Open Delay.......................................................................................................20
4.2 Basic Operate....................................................................................................................21
4.2.1 Check controller’s Info...........................................................................................21
4.2.2 Upload Setting.........................................................................................................22
4.2.3 Monitor....................................................................................................................22
4.2.4 Download................................................................................................................24
4.2.5 Locate......................................................................................................................25
4.2.6 Persons Inside.........................................................................................................26
4.2.7 Query Records.........................................................................................................26
Part 5 Tools.....................................................................................................................................27
5.1 Lost Card register...............................................................................................................27
5.2 Change Password...............................................................................................................27
5.3 Operator Management........................................................................................................28
5.4 DB Compact/Repair...........................................................................................................30
5.5 Interface Locked.................................................................................................................30
5.6 Option.................................................................................................................................31
Part 6 Extended Function..............................................................................................................32
6.1 Time profile........................................................................................................................35
6.2 Peripheral control...............................................................................................................38
6.3 PassWord Management......................................................................................................39
6.4 Anti-passback.....................................................................................................................41
6.5 InterLock............................................................................................................................42
6.6 Activate Multi-card access.................................................................................................43
6.7 Timing auto-operation management..................................................................................44
-2-
6.8 Timing collect data.............................................................................................................45

6.9 Periodically Upload Privilege............................................................................................46
6.10 Log Query........................................................................................................................47
6.11 First Card Open................................................................................................................48
6.12 Monitoring Map...............................................................................................................49
6.13 Camera Monitoring..........................................................................................................50
6.14 Check Access Manger......................................................................................................54
6.15 Meeting Sign....................................................................................................................57
Part 7 Module:Attendance............................................................................................................61
7.1 Normal shift configuration.................................................................................................61
7.2 Holiday...............................................................................................................................62
7.3 Leave/Business Trip...........................................................................................................63
7.4 Manual Sign In...................................................................................................................64
7.5 Report.................................................................................................................................65
Part 8 Module:Patrol.....................................................................................................................66
8.1 Patrol Configure.................................................................................................................67
8.2 Patrolman...........................................................................................................................67
8.3 Patrol Point.........................................................................................................................68
8.4 Patrol Route........................................................................................................................69
8.5 Patrol Task..........................................................................................................................70
8.6 Patrol Report......................................................................................................................71
8.7 Patrol Statistics Report.......................................................................................................71
Part 9 Const meal...........................................................................................................................72
9.1 Meal setup..........................................................................................................................72
9.1.1 Readers for Meal.....................................................................................................72
9.1.2 Meal Rules..............................................................................................................73
9.1.3 Meal Period.............................................................................................................73
9.2 Meal Report........................................................................................................................74
Part 10 Excursus:...........................................................................................................................75
10.1 RS232/RS485...................................................................................................................75
10.2 TCP/IP..............................................................................................................................76
10.3 Complex network.............................................................................................................76
-3-
Preface
Purpose of this Document
The Software Suite Guide provides the procedures and information necessary to use Version 6.9 of
the Access Control System. These procedures guide you to use the following groups of functions:
Badging
Hardware configuration
Database configuration
Monitoring
Reporting
Administration
Audience
This direction is written for two kind of readers .Part 1 is opened for actual operation Access
Control System’s user,such as security personnel .Part 2 is opened for an administrator who first
configures the system.
Part 1 Setup and Remove applications

1.1 Setup applications
First puts in the CD to CD-ROM, then run the applications of setup ( ).
-4-
1.1.1 Setup Microsoft.Net
When in your computer has not installed Microsoft.NET Framework, The system can from
next step for you to install Microsoft.NET Framework 1.1.
-5-
If your computer has installed Microsoft.NET Framework, The system will from next
step for you to install Access Control System.
-6-
1.1.2 Setup Access Control software
-7-
-8-
After the installment completes, the desktop automatically will create、 .
1.2 Remove applications
-9-
- 10 -
Part 2 Login
Click the or run All Programs << iCCard << Access Control & Attendance V6.9.
It will open up the Login windows .As follows:
By default, the user name required is “ abc ”, the password required is “123”.
It is recommend to change the name and password at the first use.
After login , It will show the main windows . as follows:
- 11 -
At you first login ,it will shows a basic guide. If you do not have the experience, you may
complete the basic operation and the establishment under this guide's direction. But, we suggested
that you’d better close the basic guide ,at the same time you should read the manual carefully to
familiar with the operation of software.
After close the " basic guide", the operation windows as follows.
- 12 -
Part 3 Adding and Editing Basic Configure

3.1 Add Department
Select Basic Configure > Departments from the menu bar
click the to create a new department.
Click the to add a new section under a department.
- 13 -
3.2 Add and Edit a Personnel

Select Basic Configure > Personnel from the menu bar
After you input all information about the user, click this button, the system had add
a user .At the same time ,it will remain show the user windows and wait for you input the next
user’s information .
- 14 -
3.3 Import customer's information from Excel

Select Personnel << Ctrl + Shift + Q << Import From Excel
If you want to use Excel importing customer’s information, please edit the document of
userinfo.xls first., the userinfo.xls document is located on the control at gate manages software
(C:\Program Files\iCCard),showing as this:
- 15 -
Remark: The card number must be more than three numbers, department and section can
with"\" for box off a sign. For example: MIS\DEV
Import customer's information from Excel was successfully, information hints, click an
assurance .
Part 4 Access Control
4.1 Configuration
Your organization can prevent material or information robbery, by limiting / supervising the
access to all or part of your facility (lab, computer room, or storage areas) to authorized persons,
during specific time periods.
Smart multi-technology controllers, linked to advance identification systems, are programmed
to control "who is going where and when". Each person is equipped with a personalised card or
another ID that controls access.
When a badge holder needs permission to access a particular area, the information is relayed
from the reader to the controller. The controller either grants or refuses access according to the
parameters defined (access authorization, time zones, etc.) The operations are then sent to the
PC and listed in the backlog and the journal.
Access control parameters are mainly defined in the “ Parameter” section of the application.
4.1.1 Hardware Configure

Select Basic Configure << Controllers from the menu bar
click the to add the controllers into system.
- 16 -
The product S/N (namely each controller serial number) may check on the PCB’s label
S/N:***** of the controller . please fills that five numerals.
Note: If the product S/N you fills and the PCB's label S/N:***** are different ,it will cause the
software can't communicate with the controllers.
If you want to see the setting details , please consult the Excursus .
4.1.2 Access Privilege

Select Access Control << Access Privilege from the menu bar or shortcut.
- 17 -
After you click this button ,and then basic operate << upload ,the
selected users can through selected doors .
After you click this button, the selected users can through selected doors
.
- 18 -
After you click this button ,and then basic operate << upload ,the
selected users can’t through selected doors .
After you click this button , the selected users can’t through selected
doors .
: If user A and the user B have the same privileges, we can copy user
A’s privileges to user B.
- 19 -
After you add the all privilege into the system ,you must go to the basic operate << upload to
Upload Setting(Part 4.2.2).
4.1.3 Rename Door
Select Basic Operate << Console ,
Select the door first and then Right Click pop-up menu.
4.1.4 Set Open Delay

Select Basic Operate << Console
Select the door first and then Right Click pop-up menu.
- 20 -
4.2 Basic Operate

Select Basic Operate << Console from the menu bar .The console windows contain many basic
operate for controller .For example ,check info Adjust Time Upload Monitor Collect Data etc.
4.2.1 Check controller’s Info

Select Basic Operate << Console from the menu bar or the shortcut of Basic Operate << Check
It will show the control’s basic information .such as the amount of records and privileges ,door
state ,control state ,open delay(sec) .If the controller is good Communicate with computer , the
door label’s color is green , otherwise the door label’s color is red .
- 21 -
4.2.2 Upload Setting

Select Basic Operate << Console from the menu bar or shortcut of Basic Operate << Upload
After you set the access controller’s information , you must upload the database’ configuration
to access controllers.
4.2.3 Monitor
Select Basic Operate << Console from the menu bar or shortcut of Basic Operate << Monitor
- 22 -
Attention : how to display user’s photo at Monitor
First: You must rename the user’s photo name with his or her Card Number.
For example: the photo name is 8862127.jpg. In actual 8862127 is Card Number.
Second: When you adding user, the user’s Card Id is the photo name just what you renamed .For
example: 8862127 is the photo’s name.
- 23 -
At the monitor window
When the user swiping card, the monitor window could show the user’s photo at the same time.
4.2.4 Download
Select Basic Operate << Console from the menu bar or shortcut of Basic Operate << Download
: Gather the access controller’s records to database.
- 24 -
= +
4.2.5 Locate
At the Realtime download window, Select the door first and then Right Click pop-up menu,
then choose Locate .you can carry out Personnel localization.
- 25 -
You can input the user’s Name or Card ID or Worker No into the User textbox ,it will indicate
this person the latest record that what’s time which door the person entered. So you can know the
place of this person at present.
4.2.6 Persons Inside

At the Realtime download, Select the door first and then Right Click pop-up menu .,then choose
Persons Inside ,it will show the window of Persons Inside the door.
4.2.7 Query Records

Select Basic Operate << Query Card Records from the menu bar or the shortcut of Basic
Operate << Query Card Records
- 26 -
Part 5 Tools
5.1 Lost Card register
When someone has lost him or her card, you must carry on the loss registration to the old card ,
and then redistributes a new card to someone .The steps as follows:
Select Basic Configure<<Lost Card register
5.2 Change Password

Change operator’s password.
- 27 -
Select Tools<< Change Password
5.3 Operator Management

Select Tools<< operator Management
- 28 -
: assign the executable operation and function to operators
: assign the Department that the operator can manage.
: assign the Door that the operator can manage.
- 29 -
5.4 DB Compact/Repair
Select Tools<< DB Compact/Repair
5.5 Interface Locked

The operator is afraid of someone will operate the software after she or he left ,he can interface
locked the window ,the application run as also.
Select Tools<< Interface Locked
- 30 -
After he or she comes back , he or she inputs the password all right.
5.6 Option
Tools<< Option
- 31 -
Select Child Function (Access Control, Patrol, Other Shift Const Meal)
Select Environment(Office ,House)
Select language (English,Chinese)
Set Auto Login
Set Director of Backup
Part 6 Extended Function

Select 【tools】<<【Extended Functions】 from the menu bar
If you want to Activate the Extended Function . please input the password .
Please ask provider for password.
- 32 -
The extended function as follows:
- 33 -
- 34 -
6.1 Time profile

【Extended Functions】<<【Normal】<<【Active Time Profile】
Select Access Control << Time Profile
- 35 -
Select Basic Configure<<Access Control << Access Privilege << Change Privilege
- 36 -
6.2 Peripheral control

【Extended Functions】<<【Normal】<<【Peripheral control】
Select Basic Configure << Access Control << Peripheral control
- 37 -
6.3 PassWord Management

【Extended Functions】<<【Normal】<<【Access Keypad】
- 38 -
Select Basic Configure<<Access Control<<Password Management
- 39 -
【Extended Functions】<<【Normal】<<【Supervisor PIN】
- 40 -
【Extended Functions】<<【Others】<<【Supervisor PIN】
6.4 Anti-passback
【Extended Functions】<<【Advanced】<<【Anti-pass back】
- 41 -
6.5 InterLock
【Extended Functions】<<【Advanced】<<【InterLock】
- 42 -
6.6 Activate Multi-card access

【Extended Functions】<<【Advanced】<<【Activate Multi-card access】
- 43 -
The first group has two peoples the second group has two people , the third group has four people .
each group comes two people to be allowed to open the door.
6.7 Timing auto-operation management

【Extended Functions】<<【Advanced】<<【Timing auto-operation management】
- 44 -
6.8 Timing collect data

【Extended Functions】<<【Others】<<【Timing Download】
- 45 -
6.9 Periodically Upload Privilege

【Extended Functions】<<【Others】<<【Periodically Upload Privilege】
6.10 Log Query

【Extended Functions】<<【Event】<<【Log Query】
- 46 -
- 47 -
6.11 First Card Open

【Extended Functions】<<【Advanced】<<【First Card Open】
- 48 -
6.12 Monitoring Map

【Extended Functions】<<【Interface】<<【Monitoring Map】
- 49 -
6.13 Camera Monitoring

【Extended Functions】<<【Interface】<<【Camera Monitoring】
Select 【Tools】<<【Camera Management】
- 50 -
Add camera, click “New”, as shown:
Set the Readers corresponding Web Camera
- 51 -
Display Photo Compare Window. Please【Console】<<【Camera】
If you want to delete snap pictures and video files,

please 【Tools】<<【Camera Management】<<【Delete Bmp-Video】.
If you want to set up video server's IP address,
please 【Tools】<<【Camera Management】<<【Set Video IP】,as shown:
- 52 -
Please input "New IP Address" and re-input “Confirmed New IP”.

Information for the show:
Set Video IP Successfully.

If the Information Display:
Set Video IP Failed.
Query Camera View, Select 【Query Card Records】<<【Camera View】
- 53 -
6.14 Check Access Manger

【Extended Functions】<<【Advanced】<<【Active Check Access Inside】
Select Tools << Check Access Manager
- 54 -
Set the department for opening doors by swpiping.

Set the deparments for outside swiping.
click “Edit”.
In the console “realtime-download”, external swipings will active

pop-up message box, as followed:
- 55 -
6.15 Meeting Sign

【Extended Functions】<<【Interface】<<【Active Meeting Sign】
Select Meeting << Meeting Sign
- 56 -
Add the meeting, please click ,
- 57 -
Click , modify the meeting.
Click to delete the meeting.
click "Add Addr", as shown:
click "Add" ,
- 58 -
Click “Stat.”:
Click “Real-time Sign”:
- 59 -
Part 7 Module:Attendance
The Access Control System had Activated the Attendance by default. If you want cancel this
function ,please select【Extended Functions】<<【Interface】<<【Don’t Display Attendance】
7.1 Normal shift configuration
- 60 -
7.2 Holiday
- 61 -
7.3 Leave/Business Trip
- 62 -
7.4 Manual Sign In
- 63 -
7.5 Report
Attendance Detail
- 64 -
Attendance Statistics Report
Part 8 Module:Patrol
【Extended Functions】<<【Interface】<<【Display Patrol】
- 65 -
8.1 Patrol Configure
8.2 Patrolman
- 66 -
8.3 Patrol Point
- 67 -
8.4 Patrol Route
- 68 -
8.5 Patrol Task
- 69 -
8.6 Patrol Report
8.7 Patrol Statistics Report
- 70 -
Part 9 Const meal

【Extended Functions】<<【Interface】<<【Const meal】
9.1 Meal setup
9.1.1 Readers for Meal
Select Readers for Meal from Optional Readers
- 71 -
9.1.2 Meal Rules
9.1.3 Meal Period
- 72 -
9.2 Meal Report
Meal Details Report
Meal Stat. report of Readers for Meal
- 73 -
Meal Stat. report of Users
Part 10 Excursus:
10.1 RS232/RS485
- 74 -
10.2 TCP/IP
all controllers are in the same network..
- 75 -
10.3 Complex network
The controllers are separated into different network . Each controller must be assigned a unique IP
address .
- 76 -
- 77 -

Access Control Management Software Suite Guide: Release 6.9

Uploaded by

Copyright:

Available Formats

Access Control Management Software Suite Guide: Release 6.9

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Access Control Management Software Suite Guide: Release 6.9

Uploaded by

Copyright:

Available Formats

ACCESS CONTROL MANAGEMENT

Software Suite Guide

6.8 Timing collect data.............................................................................................................45

Part 1 Setup and Remove applications

First puts in the CD to CD-ROM, then run the applications of setup ( ).

1.1.1 Setup Microsoft.Net

1.1.2 Setup Access Control software

After the installment completes, the desktop automatically will create、 .

1.2 Remove applications

It will open up the Login windows .As follows:

After login , It will show the main windows . as follows:

Part 3 Adding and Editing Basic Configure

click the to create a new department.

Click the to add a new section under a department.

3.2 Add and Edit a Personnel

3.3 Import customer's information from Excel

Part 4 Access Control

4.1.1 Hardware Configure

click the to add the controllers into system.

4.1.2 Access Privilege

4.1.3 Rename Door

Select Basic Operate << Console ,

4.1.4 Set Open Delay

4.2 Basic Operate

4.2.1 Check controller’s Info

4.2.2 Upload Setting

Attention : how to display user’s photo at Monitor

At the monitor window

: Gather the access controller’s records to database.

4.2.6 Persons Inside

4.2.7 Query Records

5.2 Change Password

Select Tools<< Change Password

5.3 Operator Management

: assign the executable operation and function to operators

: assign the Department that the operator can manage.

: assign the Door that the operator can manage.

5.5 Interface Locked

Part 6 Extended Function

The extended function as follows:

6.1 Time profile

Select Access Control << Time Profile

6.2 Peripheral control

Select Basic Configure << Access Control << Peripheral control

6.3 PassWord Management

Select Basic Configure<<Access Control<<Password Management

【Extended Functions】<<【Normal】<<【Supervisor PIN】

【Extended Functions】<<【Others】<<【Supervisor PIN】

6.6 Activate Multi-card access

6.7 Timing auto-operation management

6.8 Timing collect data

6.9 Periodically Upload Privilege

6.10 Log Query

6.11 First Card Open

6.12 Monitoring Map

6.13 Camera Monitoring

Select 【Tools】<<【Camera Management】

Add camera, click “New”, as shown:

Set the Readers corresponding Web Camera