Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    04 Led Indicators

    Uploaded by

    alberto raposo mateo
    This document provides an overview of LED indicators on the ProSYS Plus system. It describes the status and functions of LEDs on the main board, IP module, and GSM module. The main board LEDs indicate status, power supply failure, battery level, overload status, and activity on communication buses. The IP module LEDs show reset, hibernation, speed, link status, and errors. The GSM module LEDs indicate power, communication, and call/data activity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    04 Led Indicators

    Uploaded by

    alberto raposo mateo
    40 views19 pages
    This document provides an overview of LED indicators on the ProSYS Plus system. It describes the status and functions of LEDs on the main board, IP module, and GSM module. The main board LEDs indicate status, power supply failure, battery level, overload status, and activity on communication buses. The IP module LEDs show reset, hibernation, speed, link status, and errors. The GSM module LEDs indicate power, communication, and call/data activity.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides an overview of LED indicators on the ProSYS Plus system. It describes the status and functions of LEDs on the main board, IP module, and GSM module. The main board LEDs indicate status, power supply failure, battery level, overload status, and activity on communication buses. The IP module LEDs show reset, hibernation, speed, link status, and errors. The GSM module LEDs indicate power, communication, and call/data activity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views19 pages

    04 Led Indicators

    Uploaded by

    alberto raposo mateo
    This document provides an overview of LED indicators on the ProSYS Plus system. It describes the status and functions of LEDs on the main board, IP module, and GSM module. The main board LEDs indicate status, power supply failure, battery level, overload status, and activity on communication buses. The IP module LEDs show reset, hibernation, speed, link status, and errors. The GSM module LEDs indicate power, communication, and call/data activity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 19

    ProSYS Plus Training

    LED Indicators
    Lesson Objectives
    By the end of this lesson, you will be able to…
    • List the different LEDs in the system
    • Understand the different LED indicators
    • Take necessary actions following LED indicators

    2
    Agenda
    • Main Board LEDs
    • IP Module LEDs
    • GSM Module LEDs

    3
    Main Board LEDs
    Status

    Bus 4

    Bus 3

    Bus 2 Battery
    Auxiliary
    Low
    Power
    Overload PS Fail
    Bus 1
    USB

    4
    Status LED – LED7

    Led Color On Off Blink Slow Blink Fast


    Function
    Status Green System System BUS test/ Upgrade
    Ready Not installation Mode
    Available mode

    5
    PS Fail LED – LED9

    Led Color On Off Blink Slow Blink Fast


    Function
    PS Fail Red AC Power AC Power
    Disconnected Connected

    6
    Battery LED – LED11
    Led Color On Off Blink Fast
    Function
    Low Orange Battery failed/ Battery charged Battery charging
    Disconnected
    (Voltage < 7v) (Voltage > 11.2v) (7v < Voltage < 11.2v)

    7
    Overload LED – LED12

    Led Color On Off Blink Slow Blink Fast


    Function
    Overload Orange System in Normal System System reached
    overload risk Current reached 80% 95% current
    current limit limit

    8
    Auxiliary Power LED - LED

    Led Color On Off Blink Slow Blink Fast


    Function
    Aux PWR Green Power enabled Power
    to all disabled
    buses/zones

    9
    USB LED – LED10

    Led Color On Off Blink Slow Blink Fast


    Function
    USB Green USB Connection USB RX/TX Active
    Established Disconnected

    10
    Bus LEDs

    Led Color On Off Blink Slow Blink Fast


    Function
    Bus 1 Red

    One of the Blinking together (Bus1, Bus2,


    Bus 2 Red Bus3, Bus4): Boot Mode
    devices
    didn’t Idle State
    Bus 3 Red Following blinking(Bus1,
    answer or is Bus2, Bus3, Bus4): No Comm
    disconnected with main processor
    Bus 4 Red

    11
    IP Board LEDs

    Running Link
    Mode Status

    Fatal Speed
    Error
    Reset Hibernate

    12
    Reset and Hibernate LEDs

    Led Color On Off Additional


    Function Information
    Reset Green Normal Reset On
    Operation /Boot Wi-Fi Status – Controlled
    by Wi-Fi Processor
    Hibernate Orange Normal Hibernate On
    Operation /Boot

    13
    Additional IP Board LEDs
    Led Color On Off Blink Slow Blink Fast
    Function
    Speed Orange 100Mb/s 10Mb/s
    /Boot
    Link status Green Link Up Link Down Transmit and Receive Activity

    Running Blue Normal Not ready Boot


    Mode Operation (Power up)
    Fatal Error Red Error Normal Boot
    Operation

    14
    GSM Board LEDs
    LD2
    LD4
    LD3
    LD1

    15
    GSM LDs 1-3
    Led On Off Additional
    Function Information
    LD1 Not in Use

    LD2 Module is on Module is off

    LD3 Communication No
    with Main Board Communication
    with Main Board

    16
    GSM LD4
    Led On Off Blink Slow Blink Fast
    Function
    LD4 Voice call: Module is 600ms on/ 75ms on/
    Connected to off 600ms off: 3sec off:
    remote party 1. No SIM 1. Registered
    or 2. No PIN to GSM
    Data call: 3. Network search in network
    Connected to progress
    remote party or 4. Ongoing user auth.
    exchange of 5. Network login in
    parameters while progress.
    setting up or 500ms on/
    disconnecting a 25ms off:
    call 1. Packet switch data
    in progress

    Please Note: After 15 minutes all LEDs are turned off

    17
    Lesson Summary
    In this lesson we covered the following topics…
    • Main Board LEDs
    • IP Board LEDs
    • GSM Board LEDs

    18
    Thank You

    You might also like