MULTI FUNCTIONGPS VEHICLE

TRACKER

USER MANUAL

Preface
Thank you for purchasing the TK107 GPS vehicle tracker. This manual shows how to operate the device

smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that

specification and information are subject to changes without prior notice in this manual. Any change will be

integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this

document.

Content
1 Summary functions --------------------------------------------------------------------------------- 3
2 Application --------------------------------------------------------------------------------- 3
3 Hardware description
3.1 Front face ----------------------------------------------------------------------------------- 4

1
 3.2 Rear face ----------------------------------------------------------------------------------- 4
3.3 Side face ----------------------------------------------------------------------------------- 4
3.4 Bottom face ----------------------------------------------------------------------------------- 4
4 Specifications ------------------------------------------------------------------------------------ 5
5 Usage
5.1 SIM card installation ----------------------------------------------------------------------- 5
5.2 GPS Vehicle Tracker Installation ---------------------------------------------------------- 6
5.3 Startup ------------------------------------------------------------------------------ 7
5.4 Initialization ------------------------------------------------------------------------ 7
5.5 Change or resume the password ----------------------------------------------------- 8
5.6 Authorization ------------------------------------------------------------------------ 8
5.7 Real-time polling -------------------------------------------------------------------------- 8
5.8 Auto track ------------------------------------------------------------------------------ 8
5.9 Remote control oil and circuit --------------------------------------------------------- 9
5.10 Modes switch between “track” and “monitor” ----------------------------------------- 9
5.11 Geo-fence ------------------------------------------------------------------------ 9
5.12 Movement Alert -------------------------------------------------------------------------- 9
5.13 Overspeed Alert --------------------------------------------------------------------------- 10
5.14 Restart the tracker --------------------------------------------------------------------------- 10
5.15 SOS Button ---------------------------------------------------------------------- 10
5.16 Cut power alert ------------------------------------------------------------------------ 10
5.17 Set number in a online positioning platform ----------------------------------------- 10
5.18 Mode switch between “telephone” and “web” ----------------------------------------- 10
5.19 GPRS setting ---------------------------------------------------------------------------- 11
5.20 Mileage statistics ------------------------------------------------------------------------ --- 11
5.21 Reading imei ------------------------------------------------------------------------------ 11
5.22 Set time ------------------------------------------------------------------------ --- --- 11
5.23 Set web - -------------------------------------------------------------------------- --- 12
6 Attaching function ------------------------------------------------------------------------ ---- --- 12
6.1 Storage --------------------------------------------------------------------------- ------ 12
6.2 Speaking ----------------------------------------------------------------------- -------- - 10
6.3 Camera ------------------------------------------------------------------------------ --- 10
6.4 Vehicle alarm ------------------------------------------------------------------------- -------- 10
6.5 Shaking alarm ------------------------------------------------------------------- -------------- 10

2
7 Other settings --------------------- ---------------------------------------------------------------------- 12
8 Cautions --------------------------------------------------------------------------------------------- 13
9 Faults & Solutions ----------------------------------------------------------------------------------------- 13
10 Command ----------------------------------------------------------------------------------------------- 13

1 Summary function
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any
remote targets by SMS or GPRS.
1.1 Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times,
and get the working status. You can choose the Positioning Platform by yourself.
1.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the
button and the installed unit will send out alarm to the authorized numbers.
1.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and
anytime.
1.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can
monitor the sound around 5 meter.
1.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving,
the unit will send the movement alert to all authorized numbers.
1.6 Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed,
the unit will send the overspeed alert to all authorized numbers.
1.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the
message to all authorized numbers when it breaches the district.
1.8 the unit: send SMS to resume the default of unit.
1.9 Auto Track: You can set up auto track by SMS or on-line positioning platform.
1.10 Mileage statistics; ACC checking; cutting off power and alarm.
1.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm
warning.
1.12 Modify the IP and Port of Communication Protocol for different on-line positioning platform

2 Application
l Vehicle rental / Fleet management etc
l Protect wealth etc
l Provide peace-of-mind for businessmen
l Manage personnel

3
3 Hardware Description

3.1 Front face 3.2 Rear face

3.3 Side face

GPS ANTENNA
GSM/GPRS
ANTENNA

WIRE BOX

3.4 Bottom face

MIROPHONE

PRESS BUTTON TO
TAKE OUT SIM CARD.

INDICATOR FOR
SIGNALS
SIM CARD

4
4.Specs.
Content Specs.
Dim. 85mm x 63mm x 25mm(3.3”*2.5”*0.98”)
Weight 160g
Network GSM/GPRS/GPS
Band 850/1800/1900Mhz or 900/1800/1900Mhz or 850/900/1800/1900
GPS chip SIRF3 chip
GSM/GPRS
Simcom300 or Simcom340
module
GPS sensitivity -159dBm
GPS accuracy 5m
Cold status 45s
Time To First Fix Warm status 35s
Hot status 1s
Work voltage 10V—36V
Battery Chargeable changeable 3.7V 1500mAh Li-ion battery
Standby 48hours
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 5%--95% non-condensing
Work current 120MA DC12V
Support AGPS
GPS Channal 24channals
Memory Use the sd card support 1M-8G
Controller current 5V

5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in
Text format, can’t be identified for PDU format.
5.1.1 Put SIM card into card box.
5.1.2 Put the card box into host as picture.

5
5.2 GPS Vehicle Tracker Installation
GPS/GSM/GPRS tracker should be installed by technical professional of local service centre. Without
permission, the user can’t repair and move the tracker randomly. If users do, any unfortunate damage should be
compensated by himself.
5.2.1 Install Wire Box

5.2.2 GPS Vehicle Tracker Installation

10 9 8 7 6 5 4 3 2 1

1 12 13 14 15 16 17 18 19 20

1． Grey wire SPEAKING

2.
3. yellow wire OIL CONTROL
4. White wire ELECTRICITY CONTROL
5.
6. orange wire GPS_TX232
7. blue wire SOS+
8. purple wire SOS-
9. green ACC
10. red wire POWER POSITIVE
11. black wire GND
12. blue with black SHAKE ALARM
13. purple with white wire MEASURE OIL
14. pink wire VEHICLE ALARM
15. White with black wire Controller current 5V
16. Grey with black wire RX(receive)
17. yellow with red wire TX(send)
18. black wire GND
19. green with black wire AGND(MIC)
20．Coffee wire MIC PHONE

6
Installation steps (caution: the following installation should under no power, otherwise will be dangerous)

Wire for cutting off circuit of the tracker

Wire for cutting off oil of the tracker White wire connects relay feet 86; 85 feet
to 12 V DC anode, 87 feet and 30 feet are in
Yellow wire connects the relay feet 86; 85
series in the supply power circuits.
feet to 12 V DC anode, 87 feet and 30 feet in
series in the supply oil circuits.

Power supply line

Emergency triggering alarm
The red wire connects 12V “ +”;Black wire
The blue wire connects the anode of the
connects to12V“-”
alarm button, and the purple wire connects
the cathode of the alarm button.

5.3 Startup
5.3.1 Installed the tracker in the car,then put the SIM card into the tracker host outdoors.
5.3.2 For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
5.3.3 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and
the red indicator will keep flashing every 2 seconds when the GPS module is in standby mode. When the blue
indicator is keep shine, the unit has been located.
5.3.4 When this unit receives GPS signals normally, you can use it and do all the following settings.

5.4 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default
password: 123456)

7
5.5 Change the password
5.5.1 Send SMS "password+old password+space+new password" password to change the password.
Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.5.2 you can Send "resume+space+password+new password" to the tracker, to restore the original setting in
case of losing the new password,and it will reply resume password,pass word is 123456

5.6 Authorization

There are only 5 numbers able to be authorized.

5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.

5.6.2 Send SMS "admin+password+space+cell phone number" to set up a authorized number. The other
authorized numbers should be set by the first authorized number. If the number is successfully authorized, the
unit will reply "add admin number ok!" in SMS.

5.6.3 Send SMS "noadmin+password+space+authorized number" to delete the authorized number. If the
number is successfully authorized, the unit will reply "cancel admin number ok!" in SMS.If not delete the
inexistent authorized number will return cancel admin number fail

5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example,
please "send admin123456 008613311113333" to tracker to set 13311113333 as an authorized number.

5.7 Cell phone Real-time polling

5.7.1 send "obtain+password", it will report a Geo-info; Or call the tracker under track mode, it will reply
Geo-information, Geo-informaiton:

" lat:22.559791 long:113.975802 Speed:000.00 09/11/11 12:57 gps tracker bat:50% signal:A imei:
356895030630472"

5.8 Auto Track

5.8.1 Set up: Send SMS "at030s015n+space+password " to the unit, it will reply "set auto track ok" (it will
report the Geo-info at 30s intervals for 15 times, s:second, m: minute, h: hour, times and time must be three
digits)
5.8.2 Send SMS "at030s***n+space+password" to the unit, it will reply"set auto track ok" and will send SMS
heaps of times.

5.8.3 Cancel: Send "noat+password" to delete the “auto track”.

8
5.9 Remote control oil and circuit
5.9.1 Control oil
Send SMS "stopoil+password" to control oil. For example send SMS:stopoil123456

To supply the oil again, send SMS "supplyoil+password" to the unit.

5.9.2 Control circuit
Send SMS "stopelec+password" to control circuit. For example send SMS: stopelec123456
To supply the circuit again, send SMS "supplyelec+password" to the unit.
If there is no authorized number, all number can control. If there is already an authorized number, only the
authorized number can control.

5.10 Modes switch between "tracker" and "monitor"

5.10.1 The default mode is "tracker".
5.10.2 Send SMS "monitor+password" to the unit, and it will reply “monitor ok!” and switch to
“monitor”mode.
5.10.3 Send SMS "tracker+password" to the unit, it will reply “tracker ok!” and restore to “track” mode.

5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the
authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS
"stockade+password+space+longitude,latitude;longitude,latitude" to unit to set the restricted district. In
case of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark : The first longitude& latitude is coordinate of the top left corner of the Geo-fence, while the second
longitude&latitude is the coordinate of the bottom right corner. It will alarm one time in each setting,and using
","separate between latitude and longitude ,and";" between two point.
5.11.2 Cancel: Send SMS "nostockade+password" to deactivate this function.
This function will be out of effect after the unit moves outside the district.

5.12 Movement alert

5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS
"move+password" to the unit, then the unit will reply “move ok!”. In case of such a movement, it will send
SMS “Move” along with a Geo-info to the authorized numbers. It will alarm one time in each setting.
5.12.2 Cancel: Send SMS "nomove+password" to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.

9
5.13 Overspeed alert:
5.13.1 Set up: Send SMS "speed+password+space+080" to the unit (suppose the speed is 80km/h), and it will
reply "speed ok!". When the target moves exceeding 80 km/h, the unit will send SMS "speed+080!+Geo-info"
to the authorized numbers. It will alarm one time in each setting.
Remark:the speed is three digits
5.13.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert

5.14 Restart the tracker.

Send SMS "reboot+password" to the tracker. For example“reboot123456”.The tracker will be restarted.
5.15 SOS button
5.15.1 Press the SOS for 3 second, it will send "help me !+ Geo-info" to all the authorized numbers every 3
minutes. It will stop sending such a SMS when any authorized number reply SMS "help me !+ Geo-info" to the
tracker.
5.15.2 Send the SMS"help me!"to cancel the SOS alarm.

5.16 Cut power alert

If cut power,the unit will send SMS alert.
SMS format: " Cut power Alert+Geo-info".

5.17 set number in a online positioning platform

Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS
"number+password+space+tracker number" to the tracker,and will reply set number ok
for example “number123456 13500001111”. need the platform have the fuction.

5.18 Modes switch between “telephone” and “web”

5.18.1 For sending GPS data to IP address:
Set up: Send SMS "web + password" to device.
if set successfully, the device will reply SMS "set web ok".
After this, you can call the tracker. The tracker will hang up the phone and report the GPS data to IP address.
5.18.2 For sending GPS data to telephone:
Set up: Send SMS "telephone + password" to device.
if set successfully, the device will reply ‘set telephone ok’.
And then, the device will send GPS data to your telephone by SMS.

10
Remark:The default is sending the GPS data to the telephone.

5.19 GPRS setting

In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by sending SMS
commands.
5.19.1 Set an IP address and port:
The IP address and port of Communication Protocol in the tracker can be modified and transferred data to other
platform. Send SMS "ipport+password+space+ipaddress+port number" to the unit.,and it will reply set ip
and port ok If the tracker’s IP address and port should be modified to 123.98.43.254and 2456, send SMS "ip
123.98.43.254port2456"to the tracker.
Send SMS "noipport+password" to cancel the ip and port

5.19.2 Set APN

In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you
don’t know the APN, you can consult local network service supplier. The format of set APN is "apn +
password +space +CMNET". For example you send SMS "apn123456 cmnet" to the device. The device will
reply SMS "Set APN ok. Send SMS "noapn+password" to delete apn

5.19.3 Send SMS"user+password+space+APN user name +space +password" to set the APN user name and
password

5.20 Mileage statistics

Send SMS:"clear+space+mile+password "to clear the mile ,and will reply SMS"clear mile ok "

5.21 Reading imei

Send SMS"imei+password'',and will reply imei number ,for examply the imei number is 356895030630472 ,it
will reply imei:356895030630472

5.22Set Time
In order to make the time as the same with the user country,please send SMS command "zone123456 space time zone". For
example,if user country time is GMT+8,then send"time zone+password +space+08"to the device. If user country time is
GMT-6,then send"zone123456 -6"to device. The device will reply SMS"set time zone ok".

Send SMS "notime zone +password"to cancel time zone

Remark::there is a space between time and zone ,the time zone is 3 digits

11
5.23Set Web
In order to see your website in each replying SMS ,For example you website is www.webs***.com, then send "home123456
+space+www.webs***.com" . Then it will reply"set home ok",when you want to cancel it, just send "nohome123456",it will
reply SMS"cancel home ok".

6Attaching function
6.1Storage
When there is no GSM Coverage, tracker can store all info at internal memory, when GSM is BACK OK, tracker will send all
the stored info immediately to server through GPRS.and after sending all the stored info ,it will send the message
normally(remark:SD card :64M can store one month GPRS data)

6.2 Speaking
The speaking function achieved by scheduling screen,which through connecting scheduling screen and call and speak ,if have
no scheduling screen can speak through pressing SOS button ,but can't call

6.3:Camera
This function need the platform support the camera,and operate through the platform.

6.4Vehicle alarm
Vehicle alarm is someone do the illegal operation to your car,it will send a message to the authorized number
once every there minutes until recover normal .

6.5 Door alarm

When the door lock is opened, it will have a low current connect the negative to the input terminals 12th angle,
then will be sent one alarm message to the authorized number or GPRS warning is sent to the server. as the
picture below:

6.6 Oil texting

Through the external oil mass sensors, induction oil tank percentage, through replying the track message, as the picture1
show , (calculation methods: percentage * total capacity = the total amount of the oil mass) as the picture 2 show to how to

12
connect the oil mass sensor , the picture 3 is the oil sensor pattern.

(picture 1) (picture 2) (picture 3)

7Other settings
Send SMS others+password+space+ABCD
Remark:A=0,close device sending reboot sms(default)
A=1,open device sending reboot sms;
B=0,close device "low electricity and auto power off"
B=1,open device " low electricity and auto power off"(default)
C=0,close device enter into blind area(there's no GPS signal) alarm(default)
C=1,open device enter into blind area(there's no GPS signal) alarm
D=0,prohibit system run normally before close all indicators(default)
D=1, make the system run normally before close all indicators

8Cautions
8.1 Make sure to read this manual carefully before using this product.
8.2 Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the
tracker will not work normally.
8.3 The tracker’s work voltage is 10V-36V. Please use the tracker in the scope of work voltage.
8.4 Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker
to host power.

8.5 The tracker works in wireless communications, to avoid electromagnetic interference or incompatible
configuration, please stop using your tracker in the noticed place.
8.6 Keep the unit dries. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
8.7 Clear the unit with a piece of dry cloth. Don’t clean in chemicals or detergent.

13
9. Faults & The solutions

Faults Solution

Startup Fail
Check the battery and see if it is fully charged or correctly installed.

Hang up Fail
In existence of an authorized number, an unauthorized number dials up the
unit. Please initialize the unit and re-set up the authorized numbers.

Monitor Fail Check if the authorized number is setup or in the coverage of signals.

Location report in Don’t use it in the place beyond reach of signals. Place the unit outdoors,
digits of zeros. especially when starting it up.

9.Command

No FUNCTION SMS SMSREPLY CHAP

1 Intialition begin123456 begin ok 5.4
Change password password123456 666888 change password ok 5.5.1
resume
2
Resume password resume password 666888 password,password is 5.5.2
123456
Add in number admin123456 13511113333 admin ok 5.6.2
3 Delete number noadmin123456 13511113333 no admin ok 5.6.3
Stop oil stopoil123456 stop oil ok 5.9.1
4
Supply oil supplyoil123456 supply oil ok 5.9.1
Stop circuit stopelec123456 stop electricity ok 5.9.2
5
Supply circuit supplyelec123456 supply electricity ok 5.9.2
6 Restart tracker reboot123456 system will be boot...... 5.14

7 Monitor mode monitor123456 monitor ok 5.10.2

8 Tracking mode tracker123456 tracker ok 5.10.3
Add number set number ok
9 number123456 13500001111 5.17
into platform
Web mode web123456 set web ok 5.18.1
10
Telephone mode telephone123456 set telephone ok 5.18.2
11 Real-time polling obtain123456 geo-info 5.7
Auto tracking at030015 123456 auto track set ok 5.8.1
12 Auto tracking at030s***n 123456 auto track set ok 5.8.2
Cancel auto track noat123456 cancel auto track ok 5.8.3

stockade123456 Stockade ok
Geo-fence 5.11.1
13 geo-info;geo-info
Cancel geo-fence nostockade123456 no stockade ok 5.11.2
14 Movement alert move123456 move ok 5.12.1

14
 Cancel movement cancel move ok
nomove123456 5.12.2
alert
Overspeed alert speed123456 080 speedok 5.13.1
15
Cancel overspeed alert nospeed123456 cancel speed ok 5.13.2
16 SOS alert help me! 5.15
17 Cut power alert cut power alert! 5.16

ipport123456 set ip address and port

18 GPRS setting 5.19.1
116.255.131.50,8500 ok
19 Set APN apn123456 cmnet set APN ok 5.19.2
Set APN user name and user123456APNusername Set ip user name and
20 5.19.3
password 123456 password ok
21 Clear mile clear mile123456 Clear mile ok 5.20
22 Reading imei imei123456 Imei:356895030630472 5.21
23 Set time zone123456 time zone Set time zone ok 5.22
24 Set web home123456www.webs***.com Set home ok 5.23

15