7 5 7

7 year warranty on manufacture defects 5 year warranty on manufacture defects

ETERNIT PLASTIC ROOFING

INEXPENSIVE - ENDURING- RESISTANT


This is the solution for al l types of roofing that require Environment friendly.
an inexpensive, versatile, and enduring roof . We The use of PVC ETERNIT® plastic roofing
commercialize two types of roofing sheets: contributes providing natural light to spaces which
Translucent: Livianit with 1,1 ±0,2 mm width means saving energy.
Premium with 1,5 ±0,2 mm width

TRANSLUCENT ROOFING SHEET TRANSLUCENT ROOFING SHEET LIVIANIT TRANSLUCENT ROOFING SHEET, LIVIANIT
PREMIUM PROFILE 10 AND PREMIUM PROFILE 7 ZINC TYPE

Dimen
Dispon

INSTALLATION LOCATION OF THE FIXING ELEMENTS

1. Installation minimum slope: 27% = 15°. In case of installing a Translucent Sheet over Translucent Roofing sheet. Premium Profile 10
slopes lower than 27 % you must consult the Customer Service Department.
2.- As complement to the installation of the Translucent sheet , holders must be placed over Wired Ties
the wind of the wave that receives, (see detail of wing holder) and distance between belts. Material
3.- Prior to the fixation of the ties drill the tile on the highest point of the wave the Translucent aislante
Isolation Material
sheet must be fixed to the structure with wired tie without too much tension, preventing that
the tiles produce a deformation.
4.- The roofing tiles must be stored under a covered area protected against sunlight and rain. Metal or wooden belt.
5.- Always store the tiles over a flat and levelled surface (in some cases a Fibercement Livianit Translucent roofing sheet.and Premium profile 7
roofing sheet of equal profile can be used as basis for the Translucent roofing sheets).
Wired Ties
Detail of fixation and overlap Recommended Material
Inclinations aislante Isolation Material
Wind holder
Translucent roofing Material
sheet, wave that
Fibercement
receives
aislante
roofing sheet
Metal or wooden belt.

Livianit Translucent roofing sheet. Zinc type

Wing Fixing detail
4 Wired Ties
0,1 Isolation Material
Material
aislante
Wired Ties

Metal or wooden belt. Metal or wooden belt.

 TECHNICAL SHEET Translucent roofing sheet. Profile 10.

Wing holder (1)

No. 4

Translucent roofing sheet. Profile 10.

1053 ± 10 Wing holder (1)
No. 5
53
82 ± 2

Wing holder (1)

80 83 No. 6
Measures in mm

Wing holder (2)

Tile Length Width Surface Overlap Weight
m m m2 m kg No. 8

No. Total Useful Total Useful Total Useful Length. Lateral

4 1.22 1.08 1.025 1.00 1.250 1.080 0.14 0.025 3.0 Wing holder (2)

5 1.52 1.38 1.025 1.00 1.558 1.380 0.14 0.025 3.8 No. 10
1.45
6 1.83 1.69 1.025 1.00 1.875 1.690 0.14 0.025 4.5
8 2.44 2.30 1.025 1.00 2.501 2.300 0.14 0.025 6.0 Wing holder (2)

10 3.05 2.91 1.025 1.00 3.126 2.910 0.14 0.025 7.5 No. 12

12 3.66 3.52 1.025 1.00 3.751 3.520 0.14 0.025 9.0 1.76 1.76

Livianit Translucent Roofing Sheet and

Livianit Translucent Roofing Sheet and Premium profile 7
920 ± 5 Fijador de ala (1)
Premium profile 7

No. 4
51 ± 2

Fijador de ala (1)

No. 5
Measures in mm
Fijador de ala (1)

Tile Length Width Surface Overlap No. 6

Weight
m m m2 m kg
No. Total Useful Total Useful Total Fijador
Useful Length Lateral de ala (2) Premium
Livianit
4 1.22 1.08 0.92 0.873 1.122 0.942 0.14 0.047 2.05 2.66 No. 8

5 1.52 1.38 0.92 0.873 1.398 1.204 0.14 0.047 2.56 3.34
6 1.83 1.69 0.92 0.873 1.683 1.475 0.14 0.047 3.08 4.00
8 2.44 2.30 0.92 0.873 2.244 2.007 0.14 0.047 4.10 45
1.5.34 No. 10

10 3.05 2.91 0.92 0.873 2.806 2.540 0.14 0.047 5.13 6.67
12 3.66 3.52 0.92 0.873 3.367 3.072 0.14 Fijador6.15
0.047 de ala (2) 8.00
No. 12 1.76
Livianit Translucent Roofing Sheet. Zinc type.
1.76 1.76
820 ± 5

Livianit Translucent Roofing Sheet. Zinc type.

Fijador de ala (1)
16 ± 1

No. 6

Measures in mm
Fijador de ala (1)
No. 7
Tile Length Width Surface Overlap Weight
m m m2 m kg
Fijador de ala (1)
No. Total Useful Total Useful Total Useful Length Lat. Livianit
No. 8
6 1.83 1.69 0.82 0.752 1.500 1.270 0.14 0.068 2.26
7 2.15 2.01 0.82 0.752 1.763 1.511 0.14 0.068 2.64
Fijador de ala (2)
8 2.44 2.30 0.82 0.752 2.000 1.729 0.14 0.068 3.02 No. 10
10 3.05 2.91 0.82 0.752 2.501 2.188 0.14 0.068 3.77
12 3.66 3.52 0.82 0.752 3.001 2.647 0.14 0.068 4.53
No. 12
1.45

For more information call our Customer Service Line

018000115660Fijadoror visit:
de ala (2) www.eternit.com.co

1.76
1.76 1.76