Scribd Logo
Upload

Welcome to Scribd!

  • 118 views

    ARP Head Stud Measurement

    Uploaded by

    Lester Williams Betancourt
    This document provides instructions and recommendations for measuring head stud dimensions on an engine. It recommends tools like calipers and thread gauges. The sheet is used to record measurements of head stud holes, threads, and other dimensions in inches or millimeters. Photos and multiple sheets may be needed for accuracy. Measurements include counterbore depth, hole diameter, thread depths and lengths.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ARP Head Stud Measurement

    Uploaded by

    Lester Williams Betancourt
    118 views1 page
    This document provides instructions and recommendations for measuring head stud dimensions on an engine. It recommends tools like calipers and thread gauges. The sheet is used to record measurements of head stud holes, threads, and other dimensions in inches or millimeters. Photos and multiple sheets may be needed for accuracy. Measurements include counterbore depth, hole diameter, thread depths and lengths.

    Original Title

    ARP-Head-Stud-Measurement

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions and recommendations for measuring head stud dimensions on an engine. It recommends tools like calipers and thread gauges. The sheet is used to record measurements of head stud holes, threads, and other dimensions in inches or millimeters. Photos and multiple sheets may be needed for accuracy. Measurements include counterbore depth, hole diameter, thread depths and lengths.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    118 views1 page

    ARP Head Stud Measurement

    Uploaded by

    Lester Williams Betancourt
    This document provides instructions and recommendations for measuring head stud dimensions on an engine. It recommends tools like calipers and thread gauges. The sheet is used to record measurements of head stud holes, threads, and other dimensions in inches or millimeters. Photos and multiple sheets may be needed for accuracy. Measurements include counterbore depth, hole diameter, thread depths and lengths.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Head Stud Measurement Sheet RECOMMENDED TOOLS

    1) a properly calibrated caliper that will measure


    Name____________________________________________ internal and external diameters, as well as depth.
    2) Some modern heads have recessed spot faces and
    Email_____________________________________________ may require extended tip internal calipers for B and D.
    Phone/Fax_________________________________________ 3) an SAE or metric thread gage.

    Date__________________ ARP Question #_______________ HINTS


    At least one head should be removed from the engine
    Engine Specs_______________________________________ and placed on a flat surface.
    Repeat to ensure accurate measurements.
    Block Mfr./Model_____________________________________
    All holes should be checked to determine if all are the
    Year__________ ❏ cast iron ❏ aluminum same. Use separate copies of this sheet as needed.
    List all inch measurements to 3 decimal places (X.XXX)
    Head Mfr./Model_____________________________________ and all mm measurements to 1 decimal place (YYY.Y)
    Take a photo of completed form and attach to this email
    Year__________ ❏ cast iron ❏ aluminum of fax completed form to 805.650.0742

    Total Holes with Sheet _____ of _____ for this engine


    Hole Count _____ these dims _____
    Head Counterbore/Spot Face Width
    Head Counterbore Depth

    A B
    use depth gauge Stud/Bolt Hole Diameter

    Stud/Bolt Hole Depth


    D
    C Cylinder use an internal or extended tip
    Head internal calipers
    from bottom of counterbore to bottom of
    head - use depth gauge with head on a flat, Head Gasket Thickness
    solid surface
    Thread Start Depth E
    F measure the thickness of the gasket

    from deck to start of threads - use the depth


    Block Hole Depth
    from deck to bottom of hole
    rod to measure to the top of threads

    Thread Stop Depth


    H
    clean any debris from bottom of hole, use
    G the depth rod to extend to the bottom of the
    hole, take several measurements
    from deck to bottom of threads - use the
    depth bar to extend to the bottom of the
    threads Thread Size & Pitch

    Calculated Thread Length


    Engine
    I
    J Block use an SAE or metric thread gauge on the
    bolt threads if you do not have extended
    subtract F from G thread gauges

    Original are there any clearance issues around the bolt head?
    Underhead Head Collar
    Bolt Info
    optional Length Height Diameter
    ARP Head Stud Measurement Sheet - rev 07/2019

    You might also like