Service Manual: MODEL:LC-60LE631M-WH LC-60LE631X-WH

TopPage
1st Addition
SERVICE MANUAL
No.S13M1460LE631MX-WH
LCD COLOUR TELEVISION
MODEL :LC-60LE631M-WH
LC-60LE631X-WH
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
CONTENTS
CHAPTER 1.OUTLINE AND DIFFERENCES CHAPTER 5. REMOVING OF MAJOR PARTS
FROM BASE MODEL [1] REMOVING OF MAJOR PARTS...........5-1
OUTLINE/
DIFFERENCES FROM BASE MODEL ...1 CHAPTER 6. TROUBLESHOOTING TABLE
[1] TROUBLESHOOTING TABLE .........................6-1
SAFETY PRECAUTION CHAPTER 7. OVERALL WIRING/BLOCK DIAGRAM
IMPORTANT SERVICE SAFETY [1] OVERALL WIRING DIAGRAM ............................7-1
PRECAUTION.......................................1-2
PRECAUTION FOR USING LEED-FREE [2] SYSTEM BLOCK DIAGRAM............................ 7-2
SOLDER...............................................1-3
CHAPTER 8. PRINTED WIRING BOARD ASSEMBLIES
[2] MAJOR SERVICE PARTS [1] Main Unit ...................................................8-1
MAJOR SERVICE PARTS......................1-4 [2] T-CON Unit ..............................................8-9
[3] RC/LED Unit ......................................... ..8-13
[4] KEY Unit ...................................................8-15
CHAPTER 2. SPECIFICATIONS
[1] SPECIFICATION.................................2-1 CHAPTER 9. SCHEMATIC DIAGRAM
[1] DESCRIPTION OF SCHEMATIC
CHAPTER 3.OPERATION MANUAL DIAGRAM..................................................9-1
[1] OPERATION MANUAL........................3-1 [2] MAIN Unit.. ...............................................9-2
[3] T-CON Unit. .............................................9-5
[4] RC/LED Unit ............................................9-15
CHAPTER 4.DIMENSIONS
[1] DIMENSIONS ............................. .. 4-1 [5] KEY Unit ...................................................9-17
Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for

after sales service only.
The contents are subject to change without notice.
Downloaded from www.Manualslib.com manuals search engine
LC-60LE631M/X-WH
CHAPTER 1. OUTLINE AND DIFFER-
ENCES FROM BASE MODEL
[1] OUTLINE / DIFFERENCES FROM BASE
MODEL
This model is based on the LC-60LE630M/X and partially modified.

For the contents not covered in this Service Manual, accordingly, please refer to the LC-60LE630M/X Service Manual
DIFFERENCES FROM BASE MODEL KEYMF904FM10 (60LE631M-WH) Part code changed
LIST OF CHANGED PARTS KEYMF904FM12 (60LE631X-WH) Part code changed
Ref. No. Description LC-60LE630M/X LC-60LE631M/X-WH Note

PRINTED WIRING BOARD ASSEMBLIES
N MAIN Unit DKEYMF904FMG1 DKEYMF904FM10 Part code changed
N MAIN Unit DKEYMF904FMG2 DKEYMF904FM12 Part code changed
N R/C LED Unit RUNTKF799FMF7 DUNTKG016FMF8 Changed
N KEY Unit DUNTKF800FMF7 DUNTKF800FMF8 Changed
N POWER Unit RUNTKA847WJN1 RUNTKB057WJQZ Changed
N T-CON DUNTKF908FM06 DUNTKF908FM11 Changed
LCD PANEL
N LCD Panel Module Unit R1LK600D3GW8BW R1LK600D3GV0DF Changed
CABINET PARTS, SUPPLIED ACCESSORIES, PACKING PARTS (NOT REPLACEMENT ITEM), SERVICE JIGS (USE FOR SERVICING)
Please refer to a Parts list.
1–1
LC-60LE631M/X-WH
SAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY
LC32LE240M

5GTXKEG/CPWCN
IMPORTANT SERVICE SAFETY PRECAUTION

Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the
servicing guidelines which follow:
WARNING All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a nonpolarized adaptor plug must be used
1. For continued safety, no modification of any circuit should be only for the purpose of completing these checks.)
attempted.
Any reading of 0.74 Vrms (this corresponds to 0.5 mA rms AC.) or
2. Disconnect AC power before servicing. more is excessive and indicates a potential shock hazard which
must be corrected before returning the monitor to the owner.
BEFORE RETURNING THE RECEIVER (Fire &
Shock Hazard)
Before returning the receiver to the user, perform the following
safety checks: DVM
3. Inspect all lead dress to make certain that leads are not pinched, AC SCALE
and check that hardware is not lodged between the chassis and
other metal parts in the receiver. 1.5k ohm
4. Inspect all protective devices such as non-metallic control knobs, 10W
insulation materials, cabinet backs, adjustment and compartment
covers or shields, isolation resistor-capacitor networks, mechanical
insulators, etc.
5. To be sure that no shock hazard exists, check for leakage current in
0.15 µF
the following manner.
TEST PROBE
• Plug the AC cord directly into a 110-240 volt AC outlet.
• Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral-
leled by a 0.15 F capacitor in series with all exposed metal cabinet
parts and a known earth ground, such as electrical conduit or elec-
trical ground connected to an earth ground. TO EXPOSED CONNECT TO
• Use an AC voltmeter having with 5000 ohm per volt, or higher, sen- METAL PARTS KNOWN EARTH
GROUND
sitivity or measure the AC voltage drop across the resistor.
• Connect the resistor connection to all exposed metal parts having a
return to the chassis (antenna, metal cabinet, screw heads, knobs
and control shafts, escutcheon, etc.) and measure the AC voltage
drop across the resistor.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD colour television have For continued protection, replacement parts must be identical to those
special safety-related characteristics. used in the original circuit.
These characteristics are often not evident from visual inspection, nor The use of a substitute replacement parts which do not have the same
can protection afforded by them be necessarily increased by using safety characteristics as the factory recommended replacement parts
replacement components rated for higher voltage, wattage, etc. shown in this service manual, may create shock, fire or other hazards.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by " " and shaded areas in the Replacement Parts List
and Schematic Diagrams.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTIONSAFETY PRECAUTION
1–2
LC-60LE631M/X-WH
PRECAUTIONS FOR USING LEAD-FREE SOLDER
Employing lead-free solder

• “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The
alphabetical character following LF shows the type of lead-free solder.
Example:
Indicates lead-free solder of tin, silver and copper. Indicates lead-free solder of tin, silver and copper.
Using lead-free wire solder

• When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause dam-
age or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 C, we recommend you to use a dedicated soldering
bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.
Soldering
• As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 C which is higher than the conventional lead solder by 40 C, and as it has poor
solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be
peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the
steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as
required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
• Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
PRICE PART
PARTS CODE DESCRIPTION
RANK DELIVERY
ZHNDAi123250E BL J 0.3mm 250g (1roll)
ZHNDAi126500E BK J 0.6mm 500g (1roll)
ZHNDAi12801KE BM J 1.0mm 1kg (1roll)
1–3
LC-60LE631M/X-WH
[2] MAJOR SERVICE PARTS
MAJOR SERVICE PARTS

LC60LE630M

MAJOR SERVICE PARTS
PWB UNIT
Ref No. Part No. Description

N DKEYMF904FM10 MAIN Unit (LC-60LE631M-WH)
N DKEYMF904FM12 MAIN Unit (LC-60LE631X-WH)
N DUNTKG016FMF8 R/C LED Unit
N DUNTKF800FMF8 KEY Unit
N RUNTKB057WJQZ POWER Unit
N DUNTKF908FM11 T-CON Unit
OTHER UNIT
Ref No. Part No. Description

N R1LK600D3GV0DF 60" LCD Panel Module Unit
SERVICE JIGS
Ref No. Part No. Description Q’ty

N QCNW-C222WJQZ Connecting Cord,T-Con - LCD Panel 2
N QCNW-F676WJQZ Connecting Cord, Main-T-Con (LW) 1
N QCNW-G405WJQZ Connecting Cord, Main-T-Con (PL) 1
N QCNW-N125WJPZ
CNW- Connecting Cord, Main-Power (PD) 1
1–4
LC-60LE631M/X-WH
CHAPTER 2. SPECIFICATIONS
[1] SPECIFICATIONS
Item Model LC-60LE631M-WH / LC-60LE631X-WH
LCD panel 60" (1525 mm) Active Matrix type a - Si TFT

Resolution 2,073,600 pixels (1920 x 1080)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV TV-Standard ( 60LE631M-WH ) PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
Function TV-Standard Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1
(60LE631X-WH) Digital DVB-T
Receiving VHF/UHF 44.25 — 863.25 MHz
Channel CATV S1 — S41ch (including Hyperband)
TV-Tuning System Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles H : 176º V : 176º
Audio amplifier 10 W x 2
Speakers 3.2 x 15 cm 2pcs
Terminals Antenna input UHF/VHF 75 DIN type
HDMI 1 HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz), AUDIO in (common use with
PC) (Ø 3.5 mm jack)
HDMI 2 HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
HDMI 3 1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
INPUT 4 VIDEO in, AUDIO in
INPUT 5 VIDEO in, AUDIO in
INPUT 6 AUDIO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz,
1080I/50Hz, 1080I/60Hz)
AUDIO OUT Audio out
AUDIO IN (R/L) Ø 3.5 mm jack*
PC 15 pin mini D-sub, AUDIO in (common use with HDMI 1) (Ø 3.5 mm jack)
USB USB
RS-232C 9 pin D-sub male connector
DIGITAL AUDIO OUTPUT Optical Digital Audio Output
Headphones Ø 3.5 mm jack
OSD language (60LE631M-WH) English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
OSD language (60LE631X-WH) English
Power Requirement AC 110 — 240 V, 50/60 Hz
Power Consumption 188 W (0.5 W Standby)
without stand (mm) 1384 (W) x 839 (H) x 73 (D)
Dimensions
with stand (mm) 1384 (W) x 874 (H) x 341.5 (D)
Weight without stand (with stand) 25.5 kg (28.5 kg)
Operating Temperature 0°C — 40°C
* The HDMI1 and PC terminals can both use the same audio input terminal.
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
2–1
LC-60LE631M/X-WH
CHAPTER 3. OPERATION MANUAL

[1] OPERATION MANUAL
4 Attaching the s tand cover.

Attaching the stand unit 1 Insert the stand cover.
2 Insert and tighten four short screws into the holes of
Before performing work, spread cushioning over the surface the stand cover.
on which you will be laying the TV. This will prevent it from
being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
1 C onfirm that there are s crews with the s tand unit.
(Eight long screws and four short screws)
2 Attach the s upporting pos t for the s tand unit onto

the bas e us ing the long s crews with a s crewdriver NOTE
as s hown. To detach the stand unit, perform the steps in reverse order.
A screwdriver is not supplied with this product.
Supporting
post
Front
3 Ins ert the s tand into the openings on the bottom

of the TV (hold the s tand s o it will not drop from
the edge of the bas e area).
Soft cushion
3–1
LC-60LE631M/X-WH
CHAPTER 4. DIMENSIONS
[1] DIMENSIONS
Dimensional drawings
Unit: mm
1384
1333*1
1333
*1
341.5
400
10 ο
386
178
438
106 219
AN-52AG4
I Active area
NOTE
• Dimensions do not include protrusions such as screws and some parts.
4–1
LC-60LE631M/X-WH
CHAPTER 5. REMOVING OF MAJOR

PARTS
JOR
PAR
TRE
MO
VIN
[1] REMOVING OF MAJOR PARTS

G
OF
MAJ
OR
PAR
TRE
MO
1. Removing of the Stand Unit and Rear Cabinet VIN
OF
1. Remove the 4 lock screws [1] and detach the Stand Unit [2].MAJ
OR
PAR
TRE
2. Remove the 1 lock screw [3] and detach the AC Cord Cover [4].
MO
VIN
3. Disconnect AC Cord [5]. OF
MAJ
OR
4. Remove the 16 lock screws [6], 1 lock screw [7], 3 lock screws [8], 2 lock screw [9],
PAR
TRE
MO
VIN
5. Remove the 10 lock screws [10], and detach the Rear Cabinet A ss’y [11].
G
OF
MAJ
OR
PAR
TRE
MO
VIN
OF
MAJ
OR
PAR
TRE
6 MO
VIN
OF
MAJ
OR
PAR
11
TRE
MO
VIN
OF
MAJ
OR
PAR
TRE
MO
VIN
OF
MAJ
OR
PAR
TRE
MO
VIN
OF
MAJ
OR
PAR
TRE
MO
VIN
G
OF
5 MAJ
OR
PAR
8
7
3
9 9
10
5–1
LC-60LE631M/X-WH
2. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (PD, LW, PL, RA)
2. Disconnect the following connectors from the POWER Unit. ( PD )
3. Disconnect the following connectors from the LCD CONTROL Unit. (LW, PL, FFC)
4. Disconnect the following connectors from the KEY Unit. (KM)
5. Disconnect the following connectors from the R/C, LED Unit. (RA)
5–2
LC-60LE631M/X-WH
3. R emoving of S peaker (L/R)

1. R emove the 4 Hooks and detach the 2 Bottom Cover (8) .
2. Detach the S peake r (L) (1) , S pea ker (R) (2) .
5–3
LC-60LE631M/X-WH
4. Removing of the PWB Units

1. Detach the Key Cover [1], remove the 2 lock screws [2], detach the Key Button [3] and detach the KEY Unit [4].
2. Detach the R/C LED Unit [5].
3. Detach the Side Cover [6].
4. Remove the 2 lock hexagon screws [7] and 2 lock hexagon screws [8].
5. Remove the 10 lock screws [9] and detach the MAIN Unit [10] and POWER Unit [11].
6. Remove the 6 lock screws [12] and detach the LCD CONTROL Unit [13].
10 9 7
Side Cover
6
MAIN Unit 10
8
POWER Unit 11
Key Button
2
3
KEY Unit
4
KEY Cover
1
R/C LED Unit 5
12
LCD CONTROL Unit 13
5–4
LC-60LE631M/X-WH
5. Removing of the LCD Panel Module Unit

1. Detach the 21 H ooks [1] and detach the LCD Panel Module Unit [2].
5–5
LC-60LE631M/X-WH
[ 2 ] PRECAUTIONS FOR ASSEMBLY

[Precautions when fixing the Rear Cabinet]
When fixing the Rear Cabinet, be careful not to catch the backlight LED harness, speaker harness and other harnesses in it.
• The hooks on the external wall of the Rear Cabinet are fitted in the Front Cabinet Ass’y. After putting the Rear Cabinet in place, fit the hooks
securely; then tighten the screws.
(Work method of Rear Cabinet fixation)
Rear Cabinet
(Mat parts)
Front Cabinet Ass'y

(Luster parts)
There is a gap without the fingernail fitting in completely only when covering Please tighten the screw after Rear Cabinet is firmly pushed, and the
with Rear Cabinet. fingernail is confirmed.
It becomes the factor of a gap increase of Front Cabinet Ass'y/Rear Cabinet
and the Rear Cabinet misregistration.
(Front Cabinet Ass’y/Rear Cabinet fingernail fixation place)
5–6
LC-60LE631M/X-WH
[3] THE way of detaching Rear Cabinet
[Precaution when removing the rear cabinet]

If the rear cabinet is removed with the set upright, the speakers may fall; it results in connector disconnection. Therefore, never remove the rear cab-
inet with the set upright.
Be sure to remove the rear cabinet with the screen side down.
Speaker fall down.

Screws for fixing Speaker Speaker incline.
and Rear Cabinet
[Precaution when mounting the rear cabinet]

Put the speakers in place with the screen side down, and attach the rear cabinet.
Since the speakers are fixed by the rear cabinet, they cannot be fixed without the rear cabinet.
5–7
LC-60LE631M/X-WH
CHAPTER 6. TROUBLESHOOTING
TABLE
[1] TROUBLESHOOTING TABLE
No power (front LED failure to light up) or no startup (front LED failure to turn from red to green)
Is the AC cord plug tightly connected to the set? NO Reconnect the AC cord tightly and turn on the power again.
YES
Is the output voltage at pin (9) of P9601 (BU+5V line) as speci- NO Replace the power unit.
fied?
Is the output voltage at pin (17), (18), (19) and (20) of P9601
(13V line) as specified?
YES
Are the wire harnesses and other cables properly connected in NO Reconnect the wire harnesses and other cables properly in the
the set? set.
YES
Is there the AC_DET and PNL_ON signal input at pins (11) and NO Check the AC_DET signal line PNL_ON signal line.
(10) of P9601?
YES
Are the DC/DC converter outputs and the output voltages along NO Check the DC/DC converters and the control lines. Replace
the control lines as specified? defective parts as required.
1) B1.26V (IC9604)
2) B5.6V (IC9602)
3) BU3.3V (IC9601)
4) D3.3V (IC9606)
5) B5V (IC9611)
6) B1.8V (IC9610)
7) AU3.3V (IC9603)
8) AU1.8V (IC9607)
With [RF] signal input No video onscreen (1)
No video in the UHF/VHF reception
Is there IF output from the tuner pin(12) of TU1103 as specified? NO Check TU1103 and its peripheral circuits.
Is there VIDEO output from the tuner pin(16) of TU1103 as speci-
fied?
YES
Is there VIDEO input at pin (M3) of IC3303? NO Check the circuit between TU1103 & IC3303.
YES
Are there the signal outputs at pin AC (21), (22), (23), (24), AD NO Check IC3303 and its peripheral circuit.
(21), (22), (23), (24) and AE (21), (22), (23), (24) of IC3303?
YES
Check LVDS cable, LCD controller (incl. panel) and their periph-
eral circuits.
6–1
LC-60LE631M/X-WH
No audio heard (1)
No sound in the UHF/VHF reception.
Is the IF output from the tuner pin (13) of TU1103 as specified? NO Check TU1103 and its peripheral circuits.
YES
Is there the signal input at pins (W3) of IC3303? NO Check IC3303 and its peripheral circuits.
YES
Is there I2S_LRCLK signal input at pin(9) of IC2707? NO Check connection between IC3303 and IC2707 and its
peripheral circuits.
YES
Is there AMP_LRCLK signal input at pin(8) of IC2704? NO Check connection between IC2707 and IC2704 and its
YES
Is the L-ch audio signal output at pin(28) and (30) of IC2704 normal? NO Check IC2704 and its peripheral circuits.
Is the R-ch audio signal output at pin(12) and (14) of IC2704 normal?
YES
Are the audio signal L-ch and R-ch output at (4)/(5) and (1)/(3) of NO Check circuit between IC2704 & P2702.
P2702 normal?
YES
Check speakers and their peripheral circuits.
6–2
LC-60LE631M/X-WH
No audio heard (2)
No external audio heard

<INPUT 4>
Is there the L-ch audio signal input from pin (15) of input terminal
J504 to pin (AE2) of IC3303?
Is there the R-ch audio signal input from pin (8) of input terminal
J504 to pin (AE3) of IC3303?
<INPUT 5>
J504 to pin (AB1) of IC3303?
J504 to pin (AA1) of IC3303?
<INPUT 6>
J503 to pin (Y1) of IC3303?
J503 to pin (AA3) of IC3303?
YES
Is there the I2S signal output at pin A8, C7, B7 and D8 of IC3303? NO Check IC3303 and its peripheral circuits.
YES
Is there I2S_LRCLK signal input at pin(9) of IC2707? NO Check connection between IC3303 and IC2707 and its periph-
eral circuits.
YES
Is there AMP_LRCLK signal input at pin(8) of IC2704? NO Check connection between IC2707 and IC2704 and its periph-
eral circuits.
YES
Is the L-ch audio signal output at pin(28) and (30) of IC2704 nor- NO Check IC2704 and its peripheral circuits.
mal?
Is the R-ch audio signal output at pin(12) and (14) of IC2704 nor-
mal?
YES
P2702 normal?
YES
6–3
LC-60LE631M/X-WH
No audio heard (3)
No HDMI sound heard. HDMI1

(*INPUT 1 is digital audio.)
Does the HDMI image appear onscreen? NO Refer to “HDMI1 in No external input video onscreen (HDMI)”.
YES
No audio output from HDMI1. NO Check the EDID.
YES
Are waveforms input in to the pin F1, F2, G1, G2, G3, H1, H2 and NO Check peripheral circuits of IC3303.
H3 of IC3303 normally and I2S output normally?
Are waveforms input in to the pin A8, C7, B7 and D8 of IC3303
normally and I2S output normally?
YES
eral circuits.
YES
eral circuits.
YES
Is the L-ch audio signal output at pin (28) and (30) of IC2704 nor- NO Check IC2704 and its peripheral circuits.
mal?
Is the R-ch audio signal output at pin (12) and (14) of IC2704 nor-
mal?
YES
P2702 normal?
YES
6–4
LC-60LE631M/X-WH
No audio heard (4)
No sound from the HDMI sound input terminal.

(HDMI1 analog audio)
YES
Is there the L-ch audio signal input from pin (2) of external input
terminal J506 (HDMI AUDIO IN) to pin (AC2) of IC3303?
Is there the R-ch audio signal input from pin (3) of external input
terminal J506 (HDMI AUDIO IN) to pin (AB2) of IC3303?
YES
Are I2S signal output at pin A8, C7, B7 and D8 of IC3303 nor- NO Check peripheral circuits of IC3303.
mally?
YES
eral circuits.
YES
eral circuits.
YES
Is the L-ch audio signal output at pin(28) and (30) of IC2704 nor- NO Check IC2704 and its peripheral circuits.
mal?
Is the R-ch audio signal output at pin(12) and (14) of IC2704 nor-
mal?
YES
P2702 normal?
YES
6–5
LC-60LE631M/X-WH
No audio heard (5)
No PC audio output
YES
Pin (2) of J506: Is L-ch input into the pin (AC2) of IC3303?
Pin (3) of J506: Is R-ch input into the pin (AB2) of IC3303?
YES
Are I2S signal output at pin A8, C7, B7 and D8 of IC3303 normally? NO Check peripheral circuits of IC3303.
YES
Is there I2S_LRCLK signal input at pin(9) of IC2707? NO Check connection between IC3303 and IC2707 and its
YES
Is there AMP_LRCLK signal input at pin(8) of IC2704? NO Check connection between IC2707 and IC2704 and its
YES
Is the L-ch audio signal output at pin(28) and (30) of IC2704 normal? NO Check IC2704 and its peripheral circuits.
Is the R-ch audio signal output at pin(12) and (14) of IC2704 normal?
YES
P2702 normal?
YES
6–6
LC-60LE631M/X-WH
CHAPTER 7. OVERALL WIRING /

BLOCK DIAGRAM
[1] SYSTEM BLOCK DIAGRAM
[2] SYSTEM BLOCK DIAGRAM

1. LC-60LE631M-WH
Q96
7–1
LC-60LE631M/X-WH
Right-Audio-Left VIDEO INPUT 4
+B1 Audio
Out Right-Audio-Left VIDEO INPUT5
Right-Audio-Left
Right-Audio-Left INPUT6
HDMI2_
Input 3
HDMI3
HDMI2_SDA/SC
HDMI1_SDA/SCL
HDMI1
Input 2
HDMI2
HDMI0_SDA/SCL
HDMI0_
Input 1
HDMI1
INPUT7
UART_RX/TX
B1.26V PC_R/G/B
SPI_WP
SPI_DO
SPI_CK
SPI_CZ
SPI_DI
H/P
L/R
Q9602
D3.3V
USB
D3.3V
IC9610 B1.8V
S172B18U
B1.26V
R/L Input 7
H/P Digital
Audio Out
B9V
Audio Input
Audio R/L
7–2
LC-60LE631M/X-WH
2. LC-60LE631X-WH
Q960
7–3
LC-60LE631M/X-WH
Right-Audio-Left VIDEO INPUT 4
ANT +5V
+B1 Audio
Out Right-Audio-Left VIDEO INPUT5
Right-Audio-Left
Right-Audio-Left INPUT6
D3.3V
HDMI2_
B1.2V
Input 3
HDMI3
HDMI2_SDA/SC
HDMI1_SDA/SCL
HDMI1
Input 2
HDMI2
HDMI0_SDA/SCL
HDMI0_
Input 1
HDMI1
INPUT7
UART_RX/TX
B1.26V PC_R/G/B
SPI_WP
SPI_DO
SPI_CK
SPI_CZ
SPI_DI
Q9602
H/P
L/R
D3.3V
USB
D3.3V
IC9610 B1.8V
S172B18U
R/L Input 7
B1.26V
H/P Digital
Audio Out
B9V
Audio Input
Audio R/L
7–4
LC-60LE631M/X-WH
[2] OVERALL WIRING DIAGRAM
[1] OVERALL WIRING DIAGRAM
to LED m
power RUNTKB057
[AC]
Key DUNTKF800FMF8
control(Guava)
Control DUNTKF908WE
[F
SP-R RSP-ZA577WJZZ QCNW-N079WJQZ
7–5
LC-60LE631M/X-WH
ED module
QCNW-N110WJPZ
main DUNTKF904FM10 60LE631M

[PD] DUNTKF904FM12 60LE631X
QCNW-
M140WJQZ [PL] [PD]
B057WJQZ HDMI
1
Tuner
[LW]
HDMI USB
2
HDMI
3
[SP] [RA]
QCNW-
N111WJPZ
QCNW-
N113WJPZ
[PL]
[LW]
08WE11
QCNW-
N112WJQZ
[FFC]
SP-L RSP-ZA576WJZZ
R/C DUNTKG016FMF8
7–6
F
A
B
C
D
H
1
R9677
R2760 P2601
[1] MAIN Unit
C2732 C2739 R2771

R2761
C2724 R2762
C2725 R2772
2
L2705 R2773 SC2601
R2747 R2774
IC2702
R2751 R2783
LC-60LE631M/X-WH
R2784
TP2704
R2776 C2611
R2748
R2749
D2708 R3443 FB9603
R9641
R9643
R2759
TP2705
R3445 L2604 L2605 R2611
R2608
C2602
C2751 C2731 C2741 L2606
R2793
R3552
R2607
FB2710
FB2709
L9603
C2774
C2754 IC3502 R2603
C2753
L2601
R3549
C2773
R2601
R2602
C2755 L2603
C2601
L2602
C3501
C2775
C2752 L2706
R2794
R3541
R3538
FB2711
FB2712
C9633
C9630
C9646
C9645
R3539
3
D2709 C2610
BOARD ASSEMBLIES
D9604
R3540
R3543
R3542
Chip Parts Side -A
CHAPTER 8. PRINTED
R2628
R2629
R2625
R3547 IC2603 FB9608
R3550
R3528
R3530
R3529
R3514 L9601 FB9606

R3535
R2627
R3510 R2626
C9618
R3544
P2703
R3551
R3537
R3522
R3511 R3546 R3548 R9679
R3532
R3531
R3533
R3534
IC9604
R3545
C9631
C9628
R3523
R3536
R3524 D9602
P9601
R3520
R9680
R3521
R9634
4
R9602
R3508 C8404 R9630 R9624 R9627 C9622
C2728 R3513 C9625
R3509 C9619
R3512 R9619
D9601
R9612
IC9602
R3367
C2722
R3518
R9648
R9609 C9616 Q9601
R9601
IC8404
R9670
R8401
R3517
C2720
C9610
R3507 Q9605
R3383
R3379
R9671
R3347 R3346
IC3501
RDA3301 R3358
D9610
R3503 R3504 R3359

WIRING
R3502 R3506
R3351
R3354
R3355
5
D2704 D2705 R3505 R3364 R3363
R3366
R3429
R3365
R3519
C2740
C2719
R3527
R9678
C9647
R3515 R9625
C9606
R3501
R3516
C2738
C2736
8–1
IC3303
L2704
L2702
R3423
R3378
C9637
R3411
R3382
C2743
C2733
R2736 R3410
R2737 R3416 R3413 R3409
R2731 R3415 R3406
R2742
R2741
R2740
TP2706
6
R3414 R3405
R2754
R3381
R3384
R2763
R2730
R2785 R2753
TP2702
R3430
C2701
R2717
R2729
R2732
R2786 R2788 R3442
R3341
R2767 R2752
C3349
TP2703 R3388
C2746 R2787 R2750
C9632
C9634
C3330
R2711
X2701
TP2701
X3301
R2782
R3333
IC2704
C2727
R3342
R2779
C3350
R2716
R2778 C2730
R3398
C3306
R3323
R2722 R2720 C2705
R3331
R3389
R3399
R3404
R2727
C2757
R3395
C2729
R2744
R2765 C2702 R3444 R2725 C2711
R2777 R2764 C3301
L9602
R2746
R3397
R3301
R2718
R2713
R3390
R3400
R3403
R3396
R2795
IC3301
C2792
IC2707 R2796
R2705
7
C3320
C3307
C3317
C3308
C3419
C3302
C3318
C3312
R2707
IC2703
C2742
C2734
R3332
C2709
R3380
R2703
L2703
L2701
R3315
R3302
R3312
R3303
R3428
R3313
C9620
C2707
R9610
R3307
C9626
R3352
C2710
C2758
C2737
C2735
C3332
R2726
C3337
R3327
C3319
R2724 C2712 C2704
C9617
R9651
R2708
R2728
C2744 R2723 R2719 IC9606

R2721 R2712
C3331
C3314
R3314
D2707 Q2701
R2709
C2791
D2706
R2701
Q2706
R2704
C3329
C9629
8
R9614
C9601
R2804
C9623
R9655
P2701
R9642
R9656
R9649
C2749 C1147
R2801
R1153
R2790
L1104
R3441
R3440
FB2704
P2702
FB2703
IC1102
C1145
D1502
D1514
R1513
C2747
C2771
IC1105
9
R2789
D1504
D1516
FB2701
FB2702
R1516
C2776
R1514
Q1504
FB1104
R1511
C2756
Q1506
SG1516 SG1504 SG1518 SG1506 R1507 SG1514

SG1513 SG1501 SG1502 C1144
Q1501 Q1503 SG1515 SG1503 SG1517 SG1505
R1510
R1508
SG1522 SG1510 SG1524 SG1512 SG1523 SG1511
D504 SG1519 SG1507 SG1521 SG1509 SG1520 SG1508
D1101
R1116
R1110
C1107
R1111
R1117
R1123
D502
Q503 C1108 C1109
C1113
R502 C1111
10
Q501 C501 R1128
FB505
C504 R1129
R1105
R508 C502
C1118
IC1101
C1114
C1121
C505
SC1501 SC1503 SC1502 R1130 R1131
Q Q1503 SG1505
R1
R1
SG1522 SG1510 SG1524 SG1512 SG1523 SG1511
D504 SG1519 SG1507 SG1521 SG1509 SG1520 SG1508
D1101
R1116
R1110
C1107
R1111
R1117
R1123
D502
Q503 C1108 C1109
C1113
R502 C1111
10
Q501 C501 R1128
FB505
C504 R1129
R1105
R508 C502
C1118
IC1101
C1114
C1121
C505
SC1501 SC1503 SC1502 R1130 R1131
R1136
IC501
R1137
R1132
C506
R1138
R1142
R1143
R1139 R1144
C1129
C1134
C507 C1128 FB1102
C1127
R1146
C1126
R1145
C1141
C1140 C1139
D503 R1147
R503
11
C1136
C1135
R1149
R1148
C1133
C1132
FB504 C531 C533 C518 C539 C537 X1101
R509
R532
R535
R515
R543
R540
R534 R536 R516 R544 R542 C509
R545 R537 R529 R549 R548 R547 C530 C532 C517 C538 C536 R533 R541 R511
R1150
FB506
C512
D501
SC501
R546 R538 R530 FB513 FB514 FB509 FB524 FB516 R507 R505 C515
VA533
VA532
VA531
VA518
VA522
VA527 VA521 VA517 FB529 FB528 FB527 VA519 VA520 VA510 VA526 VA523 FB512 FB515 R510 R506 R513
C511 C508 C514
FB526 FB525 FB508 C1117
VA508 VA507 VA509 R1112
R1114
R625
12
R1115
R1118
Q1102
R632 R630
R616
R631 R593 C1120
R1121
R1122
L1102
IC508
R1124
C566
C1122
R1120
Q1104

C565
J504 R501 C1125
D510
VA513
C1123 R1125
R3324
C3343
13
TH3301
C523
L1103
C524
C561
R621
D513
C553 R614
R611 VA504
R590 FB520
R577 C548
C544 R581 D512
C560
R620
VA503
R578
R613
C543
SC502
FB501
R610 FB519
FB502
VA525 C1143
14
VA524
TU1103
IC1104
D516
TU1101
8–2
C1142
J506
J509
15
L1101
R1104
VA528 VA529 VA530
FB521
FB522
FB523
C549 C550 C551
R2781
R582
R583
R584
Q2703
C1115
R2768
C2761
R2810
J503 J502
16
C516
C1130
IC503
C513
R514
C510 R512
D1102
IC1103
R3374 R527 R525 R633
FB3319
R3372 C527 C526
VA505
R523
R3362 C3365 R528 R526
R3453
L501 C1138
C525
VA514
VA516 VA515 R524 FB507
R3424
R3322
R3321
R3452 R3371 FB503
FB3307
R3361
R3336
FB3318
17
C3367
R3373
VA506
C3369
C3368
FB3322
FB3323
FB3324
FB3325
FB3315
R3451
FB3321
FB3310
FB3320
FB3316
VA3304
FB3317
VA3303
VA3305
P3301
J501
J505
18
19
LC-60LE631M/X-WH
LC-60LE631M/X-WH
H Side -A
1 2 3 4 5 6 7 8 9 10
8–3
LC-60LE631M/X-WH
10 11 12 13 14 15 16 17 18 19
8–4
Q1509 R1504 TL1501 R1502
R1543
TL1510
TL1512
R
R1546
TL1509
R1531
TL1503
TL1506
TL1515 TL1504 TL1513

TL1502 TL1526
TL1514
C1110
TL1505
10
TL1508
FB1101
TL1114
TL570
FB1103
TL1118
C1146
C1124
C1131
9
TL510
TL509
TL513
TL507
TL512
TL506
TL508
R1108
TL568 TL511
TL538 TL559
R1151
8
TL505
C1116
R1141 TL1139
TL503 TL502
R1134
TL1138 TL1117
C1137 TL540 TL539 TL543
R1126
D509 R607
TL567 TL542
TL1137 TL1116 R608
TL1136 VA502
7
TL1135 TL1115
FB518
TL1134 TL1113 TL545 TL504
TL1133
C564
D508
TL560 TL544
TL569
R624
C1148 TL1132 TL1112 TL501 R623
TL546 VA501
R1119
C567
FB517
IC507
C1149 TL1131 TL1111 TL521 TL554 TL551 TL561
TL550
TL557
6
TL1130 TL1110 TL553 TL552
R1106 TL1109 TL556 TL555
TL1128 TL533
8–5
TL562
TL1108
R1152
TL548 TL532
TL558 TL528
TL1107 TL541
TL531
TL1127 TL549 TL547
5
TL1106
TL564 TL563
TL1126 TL565 TL566
R1127 TL1125
C1112 TL1105
TL1124 TL1104
C1105
C1101
TL1103 TL519 TL525
C1102
Chip Part Side - B
C1104
4
TL1102
TL1101
TL1123
C2786
C2789
R2817
C2784
TL1122 TL520 TL518 TL527 TL524

TL522 R2811 C2780 C2788
C1103 TL1121 C2778 R2815 C2787
R2812 C2781 IC2708
C2790
C1106 TL529 R2814 C2782
TL523 C2779 R2816 C2785
3
Q1101 R2813 C2783
R2819
R2818
R2780
R2821
R2820
TL534 TL535
TL1129
LC-60LE631M/X-WH
TL514 TL516
TL3314 TL3322 TL3318
2
TL517 TL3326 TL3324 TL3320
TL515
TL3313 TL3321 TL3317 TL3316
TL537 TL536 TL3315 TL3323 TL3319
1
G
H
A
E
F
LC-60LE631M/X-WH
19
R9622
C9609
C9608
C9607
C2726
IC9603
C2718
TL9630
TL2618
TL2619
IC9607
TL2614
TL2615
C9612 TL9606
R9621
FB9602
FB9607
TL9613 C2721
R2614
18
TL2635 TL2638
TL2631
R2615
TL2622
TL2632 TL2629 C3523

TL2624 TL2625
TL2628 TL2634 R2766

TL2647 C2745
R2620 TL2639
TL2623
R2775
TL2627
TL2636 TL2633
C3521
R2621
R3335 R3305
R2630 R2610
C3519
Q2704
R2617
TL2626
TL2630
TL9610 R2605 R2609 D2702

C3524 R3526
C3518
R2604
C2723
C3512
C3505
R2606
TL9601
C3502
R3525
TL9618
C3516
17
C3522
Q2601
C3520 FL3501
TL9616
TL9611 TL9631 R9674 C9615 C3513
C9624 R9629 C3361 FB3311
TL2706 TL2705
TL9612 TL9632 FB9604
C3362
FB9605
TL9621
R9633
TL9602
D9607
C9614
R9623
TL8412
TL9622 C9621 R9647
R9626
C9627
R9632
R3306
TL9603 C8403
C9642
R9646
16
R9650 TL8417
R9611
R9603
TL9624 TL9604 C3366

IC9608
R8407
IC9613 TL8413 C3503

IC8403
C9611
FB9601
R8405
TL9625 TL9605 TL8415 C3507

IC3304
TL8416
Q9602
R9645
R9644
R8406
R9668
R3360
C3517
R3446
R9607 TL8408 Q3301

R9608
TL9626 TL9607 R9676 TL8414

R9606 R9652
C3508
R9639
R8402
C9635
TL8419 C3504 C3511 C3515 C3509

C8402
C3514
IC8402
C9644
TL9627 TL9608 R9613
C3407
C3410
R8403
C3413
C3414
C3406
C3409
IC9609 IC9605 TL8422 TL8421
C3506
C3412
R9640
15
C3411 C3404 C3415
R3349
TL8411 R3386 C3510
C9643
TL9609 R9636
FB3314
TL8420 C3405 C3394
TL3334
R3426
R3420
R3421
C3403
TL3336
R3431 C3399 C3402 C3408
C3360
R9653 R9654 C3401
R3412
TL9619
C9636
TL8410
TL8418
TL8409
R3344 C3395
D9608 C3398 C3400 R9620
C3396
R3447 TL9617
8–6
TL3303
FB3313
R3345
C3390 IC9610
FB3301
D9609
TL9623 C3397
C3392
TL3335 C3393 TL526 R9618
Q3302
C3389
C3358
TP3301
C3384
C3391
R9615
D9603 C3420
TL3305
TL3302
C3359
C3382 C3387 R3385
C3378 FB3308
C3374
C3388
TL9629 R3329
C9602 R3408 R3343
C3376 C3383
C3381
R3407 FB3306 TL3327
R3434
C3380
TL3301
C3379 R3417
R9616
R3348
R3350
14
R2809
R2808
R3356
C3375
C3377
C3345 R3357
R9635
C3385
R9631
R9675
R9663
C3346
D2703
C3357
C3348
FB3303
C9603
R2733
IC9612 C3372 R3377
R2702
R2739
C2706
C3352
C3354
IC9601
R2805
C3347
R9628
C3315
C3353 C3355
R9604
C3351
R3394
C3334
C3309
C3303
C9613 TL3337
R2745
R3402
R3338
R3392 R3391
R3401
R3310
TL9614 C2715 C2714
C3373
TL9620 TL3310
C3344
R3304
R2734
R2735
R3320
R9605
R3328
R3393
C3336 FB3309 IC3302
C2717
R3375
R3325 C3335 FB3305 C2708
Q3303
R3330
C3342
C3333 C3386
R3439
C3305 R3376
R3353 C3304
R3334 C2713
13
R3308 C3313
C3325
C3316
C2716
C3338
D2701
R2802
R2807
IC9611
R3311
C9605
C9604
R3418
TL9615 R2714
FB2713
C3326

R2715 R2710
R2706
FB3304
C2703
Q2702
C3356
C2750
Q2707 R2803
12
R1541
R1535
R1540
R1539
R1533
R2738
Q2705 R2743
C1511
R1534 R2792
Q1513
C1514
Q1511
TL2704
TL1511
C1512
FB2708
C1509
R1521
R1538
Q1512
C1513
R1536
C1510
TL1531 TL1524 FB2707
R1519
TL1522
C2777
TL1521 TL1529 C2748
C2772
TL1519
C1504
R1525
R1537
C1507
TL1530
R1523
D1509 D1506 R1548 R2791
C2770
TL1517
TL1120
R3387
D1507 D1510
R1528 D1508 D1505
TL1518
IC1505
11
IC1503 FB2705
R1529
TL1516
TL2703
TL2701 TL2702
R1532
TL1523
R1520
R1527
D1503 D1512 FB2706
R1503
R1512
TL1520
C1508 TL1528
R1506
R1544
D1513
R1547
R1509
C1506
R1505
R1542
Q1508
IC1504
D1511
D1515 R1524
R1530
R1545
Q1510 TL1527
TL1525
Q1502 C1505 C1503
TL1119 Q1505
R1515
R1501 D1501 TL1507
R1517
Q1509 R1504 TL1501 R1502
R1543
TL1510
TL1512
R1546
TL1509
R1531
TL1503
TL1506
TL1515 TL1504 TL1513
TL1502 TL1526
TL1514
C1110
TL1505
10
TL1508
FB1101
TL1114
TL570
FB1103
118
LC-60LE631M/X-WH
Side -B
H
1 2 3 4 5 6 7 8 9 10
8–7
LC-60LE631M/X-WH
10 11 12 13 14 15 16 17 18 19
8–8
LC-60LE631M/X-WH
[2] T- CON Unit
Chip Parts Side -A
8–9
LC-60LE631M/X-WH
8 – 10
LC-60LE631M/X-WH
Side -A
8 – 11
LC-60LE631M/X-WH
8 – 12
LC-60LE631M/X-WH
[3] RC/LED Unit
LED Unit (Side-A)

H
LED Unit (Chip Part Side-A)
1 2 3 4 5 6 7 8 9 10
8 – 13
LC-60LE631M/X-WH
10 11 12 13 14 15 16 17 18 19
8 – 14
LC-60LE631M/X-WH
LED Unit (Side-B)

H
1 2 3 4 5 6 7 8 9 10
8 – 15
LC-60LE631M/X-WH
10 11 12 13 14 15 16 17 18 19
8 – 16
LC-60LE631M/X-WH
[4] KEY unit
KEY Unit
(Side-A)
KEY Unit
(Chip Parts Side-A)
8 – 17
LC-60LE631M/X-WH
CHAPTER 9. SCHEMATIC DIAGRAM

[1] DESCRIPTION OF SCHEMATIC DIA-
GRAM
1. VOLTAGE MEASUREMENT CONDITION:

1) The voltages at test points are measured on exclusive AC adaptor and the stable supply voltage of AC 110-240V. Signals are fed by a colour bar signal
generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
2. INDICATION OF RESISTOR & CAPACITOR:

RESISTOR
1) The unit of resistance " " is omitted.
(K=k =1000 , M=M ).
2) All resistors are ± 5%, unless otherwise noted.
(K= ± 10%, F= ± 1%, D= ± 0.5%)
3) All resistors are 1/16W, unless otherwise noted.
CAPACITOR
1) All capacitors are F, unless otherwise noted.
(P=pF= F).
2) All capacitors are 50V, unless otherwise noted.
CAUTION:
This circuit diagram is original one, therefore there may be a slight
difference from yours.
SAFETY NOTES:
1) DISCONNECT THE AC PLUG FROM THE AC OUTLET
BEFORE REPLACING PARTS.
2) SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS
POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS
OPERATING.
IMPORTANT SAFETY NOTICE:

PARTS MARKED WITH " " ( ) ARE IMPORTANT
FOR MAINTAINING THE SAFETY OF THE SET. BE SURE TO
REPLACE THESE PARTS WITH SPECIFIED ONES FOR MAIN-
TAINING THE SAFETY AND PERFORMANCE OF THE SET.
9–1
LC-60LE631M/X-WH
[2] MAIN Unit
LC-60LE631M/X MAIN1(TUNER)
1.5J(2011.4.14)
Analog 2in1: RTUNQA064WJQZ

DTV(Australia): RTUDAA062WJQZ
DTV(Taiwan): RTUDAA063WJQZ TL1129
*TU1103
B QA064WJQZ
TO MAIN10(POWER)
Analog
NC NC NC NC SIF NC AUDIO VIDEO
B5.6V
Digital
+B1
ANT+5V NC GND (5V) RF AGC GND SDA SCL AS DIF+ DIF- IF AGC SIF NC NC VIDEO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
*TL1101
*TL1102
*TL1103
*TL1104
*TL1105
*TL1106
*TL1107
*TL1109
*TL1110
*TL1112
*TL1113
*TL1115
*TL1116
*TL1117
*TL1108
*TL1111
C1102 *R1106
C1101 10u 0
0.1u 10V
25V KZA616WJQZ
C1104 C1105
3
10u 10u R1151
10V 10V R1119 0
KZA616WJQZ KZA616WJQZ
100
R1108
4
75
C1116
10P 1/8W
TQ
R1134
0
R1126 C1137
2.2K
22P R1141
50V 0
R1104 IC1104
0
1/8W TUNER 5V 250mA
5 4 C1143
4.7u
VOUT VIN 10V
C1142 KZA067WJ
4.7u
10V
KZA067WJ
S170B50U
ON/OFF VSS NC
1 2 3 TO MAIN4(CPU)
TUNER_CVBS
R1152
33K SIF+
SIF-
(A-TV)
3 4 TUNER_SCL
*R1150
0
1 2 TUNER_SDA
DUNTKF904FM**
(QPWBXF904WJZZ)
9–2
LC-60LE631M/X-WH
- 1
11
1
1
11
11
11
9–3
LC-60LE631M/X-WH
1
1
11
9–4
LC-60LE631M/X-WH
[3] R/C LED Unit
R/C.OPC,LED
OPC->RGB SENSOR
(MASTER)
LC-60LE631M/X
DS_W_SPICA/200/R
RC/OPC/LED UNIT
DUNTKG016FMF8
QKITPG016WJTN
3.3
(PWBNG016WJZZ) *IC101
VCC
4
3
Io
GA1S100W
GND
OPC
GND
*P102
2
1
NB056WJ *R137
0
CZB
BU+3.3V 1 *C105
0.01u
R/C 25V
R/C 2
OPC+3.3V 3
LED_MSENS/OPC
OPC 4
LED_REC/LED_OPC
LED_OPC 5 LED_MSENS/OPC
*R135
LED_YOYAKU/LED_SLEEP 0
LED_SLEEP 6 *C104
4.7u
LED_POWG
LED_POWG 7 CKZ
10V
LED_POWR
LED_POWR 8
GND 9
SLD101
PA076WJFW
*RMC101
UA053WJ
R/C IR RECEIVER MODULE
1 2 3
*R132
22K
R101
100
*C101
10u
CKZ
9–5
LC-60LE631M/X-WH
R
DS_W_SPICA/200/RC_OPC_US_G015/SD/RC_OPC_US_G015.cir
1J (2011.9.20)
3
2
3.2
LED_POWG 0
*Q105
0 KRC407E
LED CONT
04
D107
PXA191WJPZ
R126
160
LED_POWG
D112 GREEN
PXA223WJPZ
LED_POWR
RED
R111
39K
*R127
3.2 820
LED_POWR 0
*Q103
0 KRC407E
LED CONT
*D111
PXA223WJPZ
3.2
LED_YOYAKU/LED_SLEEP 0
*Q102
*R130
0 KRC407E YOYAKU_LED
820
LED CONT RED
*D108
PXA191WJPZ
*R129
160
LED_OPC
GREEN
3.2
LED_REC/LED_OPC 0
*Q101
0 KRC407E
LED CONT
9–6
LC-60LE631M/X-WH
[4] KEY Unit
KEY Unit
CH-UP
CH-DOWN
S151 S152
KA037WJ KA037WJ
3 1
3 1
4 2 4 2
P151
NA324WJ
KM TO MAIN
R151 R152
*TL151
8.2K 12K
KEY1 1
*TL152
KEY2 2
*TL153
STBY_POW 3
*TL154
3
GND 4
D153
4
RHEX
EX1394CE
D151
EX1394CE 5.6V
RHEX
5.6V D152
EX1394CE
RHEX
5.6V
9–7
LC-60LE631M/X-WH
KEY
INPUT VOL-UP VOL-DOWN MENU

S153 S154 S155 S156
KA037WJ KA037WJ KA037WJ KA037WJ
3 1 3 1 3 1
3 1
4 2 4 2 4 2
4 2
R152
12K
R153 R154
8.2K 12K
3 1
POWER
S157
KA037WJ
4 2
KEY UNIT
DUNTKF800FMF8
(QPWBNF800WJZZ )
9–8
PartsGuide
1st Addition
PARTS GUIDE
No. S13M1460LE631MX-WH
LCD COLOUR TELEVISION
MODEL LC-60LE631M-WH
LC-60LE631X-WH
CONTENTS
[1] PRINTED WIRING BOARD [7] CABINET AND MECHNICAL

ASSEMBLIES PARTS
[2] LCD PANEL [8] LCD PANEL
[3] MAIN UNIT ( DKEYMF904FM10 / [9] SUPPLIED ACCESSORIES

FM12 )
[10] PACKING PARTS ( NOT REPLACE-
[4] T-CON UNIT ( DUNTKF908FM11 ) MENT ITEM )
[5] RC/LED UNIT ( DUNTKF800FMF8 [11] SERVICE JIGS (USE FOR SERVIC-
) ING)
[6] KEYUNIT ( DUNTKF800FMF8 )
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used

for after sales service only.
The contents are subject to change without notice.
LC-60LE631M/X-WH
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK RANK
[1] PRINTED WIRING BOARD ASSEMBLIES

DKEYMF904FM10 BX MAIN Unit (M)-WH
DKEYMF904FM12 BZ MAIN Unit (X)-WH
RUNTKB057WJQZ BR POWER Unit
DUNTKG016FMF8 AZ LED/RC Unit
DUNTKF800FMF8 AY KEY Unit
DUNTKF908FM11 BX T-CON Unit
[2] LCD PANEL
B3KU60L631M MODULE ASSY
R1LK600D3GV0DF CZ LCD PANEL
[3] MAIN UNIT ( DKEYMF904FM10 / FM12 )
C2701 VCCCCZ1HH100DY AB V Capacitor 10p 50V Ceramic
C2702 VCCCCZ1HH120JY AB V Capacitor 12p 50V Ceramic
C2708 VCKYCZ1AB104KY AB V Capacitor 0.1 10V Ceramic
C2735 RC-KZA709WJQZY AA V Capacitor
C2740 VCKYCY1EB334KY AB V Capacitor 0.33 25V Ceramic
C2744 VCKYCY1EB334KY AB V Capacitor 0.33 25V Ceramic
C9607 RC-KZA067WJZZY AB V Capacitor
IC2707 VHIYSS951VZ-1Y AN V IC YSS951-VZE2
IC9603 VHIS132B33M-1Y AD V S-1132B33-M5T1G
IC9607 VHIS132B18M-1Y AD V S-1132B18-M5T1G
L2701 RCILPB106WJZZY AC V COIL
R2702 VRS-CZ1JF100JY AA V Resistor 10 1/16W Metal Oxide
R2705 VRK-SA1JF100JY AB V Resistor 10 1/16W Metal Composition
R2711 VRS-CZ1JF102JY AA V Resistor 1k 1/16W Metal Oxide
R2716 VRS-CZ1JF105JY AA V Resistor 1M 1/16W Metal Oxide
R2730 VRS-CZ1JF472JY AA V Resistor 4.7k 1/16W Metal Oxide
X2701 RCRSCA235WJQZY AD V Crystal
[4] T-CON UNIT ( DUNTKF908FM11 )
FB 6153 RBLN-0207TAZZY AB Ferrite Beads
FB 6161 RBLN-A438WJQZY AB Ferrite Beads
C 6321 RC-AZA082WJQZY AC Capacitor
C 5427 RC-KZA110WJZZY AC Capacitor
C 6157 RC-KZA810WJQZY AC Capacitor
2
LC-60LE631M/X-WH
RANK MARK RANK

C 6232 RH-VXA187WJQZY AC Capacitor
C 5422 VCKYCY1EB104KY AA Capacitor 0.1 25V Ceramic
C 6164 VCKYCZ1EB103KY AA Capacitor 0.01 25V Ceramic
C 6350 VCKYCZ1EF104ZY AA Capacitor 0.1 25V Ceramic
C 6183 VCKYCZ1HB222KY AA Capacitor 2200p 50V Ceramic
IC 6276 VHIBU55041+-1Y AF IC
IC 6273 VHIRP131K25-1Y AF IC
R 4812 VRK-SB1FF000JY AA Resistor
R 5437 VRS-CY1JF000JY AA Resistor
R 6333 VRS-CY1JF101FY AA Resistor
R 6322 VRS-CY1JF1R0JY AA Resistor
3
LC-60LE631M/X-WH
RANK MARK RANK

R 6315 VRS-CY1JF203DY AA Resistor
R 4803 VRS-CZ1JF000JY AA Resistor 0 1/16w Metal Oxide
R 4878 VRS-CZ1JF100JY AA Resistor 10 1/16w Metal Composition
R 4811 VRS-CZ1JF102JY AA Resistor 1k 1/16w Metal Oxide
R 7200 VRS-CZ1JF221JY AA Resistor
R 6359 VRS-CZ1JF333FY AA Resistor
R 5450 VRS-CZ1JF473DY AA Resistor
Q 6284 VS2SB1132Q/-1Y AC Transistor
Q 6283 VS2SD1664Q+-1Y AC Transistor
Q 6276 VSDTC014TEB-1Y AA Transistor
Q 6272 VSRK7002B++-1Y AB Transistor
SC 4801 QCNCWA671WJQZY AH Connector
SC 7001 QCNCWA801WJZZY AG Connector
SC 7002 QCNCWA801WJZZY AG Connector
P 4804 QPLGNA905WJZZY AD Pitch Plug
C 4823 RC-AZA075WJZZY AB Capacitor
C 4826 RC-KZA110WJZZY AB Capacitor
4
LC-60LE631M/X-WH
RANK MARK RANK

C 5404 RC-KZA510WJPZY AB Capacitor
L 6273 RCILPB255WJQZY AD Inductor
X 6151 RCRSCA243WJZZY AE Glass Sealing
FL 4801 RFILN0128CEZZY AE Filter
FL 6271 RFILNA200WJZZY AB Filter
D 6277 RH-EXA613WJZZY AD Diode
IC 6154 RH-IXD037WJZZQ BG GUAVA
IC 6151 RH-IXD084WJZZY AF 2M Flash
C 6233 VCCCCZ1HH100DY AB Capacitor
C 6234 VCCCCZ1HH100DY AB Capacitor
C 6310 VCCCCZ1HH471JY AA Capacitor
C 6338 VCKYCY1CB154KY AA Capacitor
C 6297 VCKYCY1CB224KY AB Capacitor
C 4824 VCKYCY1EB104KY AB Capacitor 0.1 25V Ceramic
C 6289 VCKYCY1EB105KY AA Capacitor
C 6303 VCKYCY1HB103KY AA Capacitor 1000p 50V Ceramic
C 6300 VCKYCY1HB152KY AA Capacitor
C 5421 VCKYCZ1EF104ZY AA Capacitor
C 6394 VCKYCZ1HB471KY AB Capacitor
D 6271 VHDRB055L30-1Y AC Diode
D 6273 VHDRB055L30-1Y AC Diode
D 6278 VHDRB520S30-1Y AC Diode
D 6272 VHDRB552EA+-1Y AC Diode
IC 5403 VHIBD8124MU-1Y AM IC
IC 6283 VHIBD9328EF-1Y AF IC
5
LC-60LE631M/X-WH
RANK MARK RANK

IC 6288 VHIMAX9673+-1Y AK IC
IC 6286 VHIMX17126A-1Y AK IC
IC 6278 VHIPQ200WNA-1Y AG IC
IC 6153 VHIPST3629N-1Y AD IC
R 4813 VRK-SA1JF000JY AB Resistor
R 6383 VRK-SA1JF100JY AB Resistor
R 5412 VRS-CB1JF000JY AC Resistor
R 6167 VRS-CY1JF000JY AA Resistor 0 1/16w Metal Oxide
R 6336 VRS-CY1JF154DY AB Resistor
6
LC-60LE631M/X-WH
RANK MARK RANK

R 6160 VRS-CZ1JF103FY AB Resistor
R 7202 VRS-CZ1JF680JY AB Resistor
R 7203 VRS-CZ1JF680JY AB Resistor
R 6379 VRS-TQ2BD332FY AA Resistor
R 6339 VRS-TV1JD000JY AA Resistor
R 6419 VRS-TV2BD150JY AA Resistor
R 5434 VRS-TW2HF3R3JY AA Resistor
R 5435 VRS-TW2HF3R3JY AA Resistor
Q 6281 VS2SC4081//-1Y AB Transistor
Q 6282 VSLTC044EEB-1Y AB Transistor
Q 6273 VSLTC044TEB-1Y AB Transistor
Q 6280 VSLTC044TEB-1Y AB Transistor
Q 6274 VSTPC6110++-1Y AC Transistor
[5] RC/LED UNIT ( DUNTKF800FMF8 )

P 0102 QPLGNB056WJZZY AD Pitch Plug
C 0104 RC-KZA761WJQZY AB Capacitor
C 0101 RC-KZA837WJQZY AB Capacitor
D 0107 RH-PXA191WJPZY AB Diode
D 0108 RH-PXA191WJPZY AB Diode
D 0111 RH-PXA223WJPZY AC Diode
D 0112 RH-PXA223WJPZY AC Diode
C 0105 VCKYCZ1EB103KY AA Capacitor
IC 0101 VHIGA1S100W-1Y AE IC
Q 0101 VSKRC407E++-1Y AB Transistor
RMC0101 RRMCUA053WJZZ AE Infra Red Receiver
[6] KEYUNIT ( DUNTKF800FMF8 )
P151 QPLGNA324WJZZY AC V Plug
R151 VRS-CY1JF822JY AA V Resistor 8.2k 1/16W Metal Oxide
R152 VRS-CY1JF123JY AA V Resistor 12k 1/16W Metal Oxide
R153 VRS-CY1JF822JY AA V Resistor 8.2k 1/16W Metal Oxide
R154 VRS-CY1JF123JY AA V Resistor 12k 1/16W Metal Oxide
S151 QSW-KA037WJZZY AC V Switch
7
LC-60LE631M/X-WH
[7] CABINET AND MECHNICAL PARTS
1-5
1-4
1-1
R/C LED UNIT
1-3
MAIN UNIT
28 7 11 14 11
1-2
17
15 POWER UNIT
3 21
3-1
21
3 21
3-2 6-1
3-1
6-2 6 6
21
3 21
3-2 6-1
3-1 4 6-2
19
3-2
21
3 4
3-1
3-2
16
21
E 22
2-7
2 20
D 2-6
f 2-2
24
2-3 21
8
9 LCD CONTROL UNIT 2-5
10
18 KEY UNIT 2-1
5-1
21
26
5-3 5-2
60" LCD PANEL MODULE UNIT
23
13
12 2-4
13
8
LC-60LE631M/X-WH

RANK MARK RANK
[7] CABINET AND MECHNICAL PARTS

1 CCABAC973WJ42 BM FRONT CABINET ASSEMBLY
1-1 GCABAC973WJ4B FRONT CABINET
1-2 GCOVAE526WJ4B COVER
1-3 HDECQB767WJ4A R/C LED DECORATION
1-4 HINDPE883WJZZ SHEET COVER
1-5 PSPAHC681WJ00 HIMELON 12 x 12 x 0.7, x3
2 CCABBC163WJ41 BR REAR CABINET ASSEMBLY (I/M/N/Z)
2 CCABBC163WJ42 BR REAR CABINET ASSEMBLY (X)
2-1 GCABBC163WJ4A REAR CABINET
2-2 HINDPE350WJ4A TERMINAL LABEL RIGHT
2-3 HINDPE364WJ4A TERMINAL LABEL LEFT
2-4 LHLDWA318WJKZ AD AC CORD HOLDER, x2
2-5 HINDPE737WJZZ AE COUTION LABEL (X)
2-6 LHLDZB705WJZZ AB TENT BOSHI CLAMP,x2 (X)
2-7 XEBS840P14000 AC SCREW FOR CLAMP, x2 (X)
3 CANGKD484WJ41 AF VESA ANGLE ASSEMBLY, x4
3-1 LANGKD484WJ4W VESA ANGLE
3-2 NSFYZA471WJF7 SEL SPACER
4 GCOVAE320WJ4A AH BOTTOM COVER,x2
5 CCOVAE060WE01 AU CONTROL BUTTON ASSEMBLY
5-1 GCOVAE060WJ4A AF CONTROL BUTTON COVER
5-2 JBTN-A977WJ4A AE CONTROL BUTTON
5-3 XEBS830P08000 AA SCREW FOR BUTTON, x2
6 CANGKD611WJ41 AL STAND FIX ANGLE ASSEMBLY, x2
6-1 LANGKD611WJ4W STAND FIX ANGLE
6-2 PSPAHC502WJ4Z AB HIMELON 25x7x0.55, x2
7 GCOVAE205WJ4A AD SIDE AV COVER
8 GCOVAE474WJ4A AE AC CORD COVER
9 LHLDWA124WJKZ AC WIRE HOLDER
10 LX-BZA170WJF8 AC SCREW FOR VESA ANGLE, x4
11 LX-BZA207WJF7 AA SCREW FOR MAIN PWB, x10
12 LX-BZA330WJF8 AB SCREW, x3
13 LX-BZA473WJN1 AC PLASTIC SCREW, x2
14 NSFTZA280WJFW AB HEX SCREW, x2
15 NSFTZA281WJFW AC HEX SCREW, x2
16 NSFTZA459WJF7 AC TRAY SHAFT, x6
17 PSPANA044WJKZ AB POWER PWB SPACER, x7
18 PSPAZC897WJKZ AN MAIN PWB SPACER 25x25x7
19 PZETKA595WJ4Z AE BARRIER SHEET
20 TLABME640WJZZ AD MODEL LABEL (I/M/Z)
20 TLABME642WJZZ AD MODEL LABEL (N)
20 TLABME650WJZZ AD MODEL LABEL (X)
21 XBPS830P06WS0 AA SCREW FOR MATEL, x45
22 XEBS830P10000 AE SCREW FOR TERMINAL
23 XEBS830P12000 AA SCREW FOR CAB-B, x10
24 HINDPD955WJ4A AD REGULATION LABEL (I)
26 PSPAZC777WJZZ AK SPACER,x2 (X)
28 TLABZD573WJZZ AF ENERGY RATING LABEL (X)
[8] LCD PANEL
1 R1LK600D3GV0DF CZ LCD PANEL
2 LX-BZA207WJF7 AA SCREW TCON PWB, x6
3 PSPAZC854WJKZ AK TCON CPU COOLER
4 PSPAZC897WJKZ AN MAIN CPU COOLER
9
LC-60LE631M/X-WH
[9] SUPPLIED ACCESSORIES
SUPPLIED ACCESSORIES
X1 Remote control unit AA size battery (x 2) X3 Operation manual
LC-60LE631M-WH LC-60LE631X-WH
X4 Stand base ass'y X5 Stand angle ass'y X6 Stand screw ass'y

RANK MARK RANK
[9] SUPPLIED ACCESSORIES

x1 RRMCGA970WJSA AQ Remote Contol (I/M/N/Z)
x1 RRMCGA971WJSA AQ Remote Contol (X)
x2 UBATUA039WJZZ AD AA Size Battery (I/M/N/Z)
x2 UBATAA023WJZZ AE AA Size Battery (X)
x3 TINS-F659WJZZ AQ Operation Manual (N/Z)
x3 TINS-F665WJZZ Operation Manual (X)
x3 TINS-F663WJZZ AK Operation Manual (I)
x3 TINS-F660WJZZ AQ Operation Manual (M)
x4 CDAI-A778WJ28 BD STAND BASE ASSEMBLY
x5 CANGKD276WJ03 AQ STAND ANGLE ASSEMBLY, x2
x6 CSAKHA050WE05 AL PACK FOR SCREW
10
LC-60LE631M/X-WH
[10] PACKING PARTS ( NOT REPLACEMENT ITEM )
S4
X4
S3
S7
S7
S7
S10
S2
S1
11
LC-60LE631M/X-WH

RANK MARK RANK
[10] PACKING PARTS ( NOT REPLACEMENT ITEM )

S1 SPAKCH098WJZZ - PACKING CASE (M/N/Z)
S1 SPAKCH099WJZZ - PACKING CASE (I)
S1 SPAKCH120WJZZ PACKING CASE (X)
S2 SPAKCG898WJZZ - BOTTOM CASE
S3 SPAKPB596WJZZ - HOSO PP
S4 SPAKPB722WJ2Z - STAND MIRROR MAT BASE
S5 SPAKPB723WJ2Z - STAND MAT SUPPORT
S6 SPAKXD752WJZZ - PACKING FOAM TOP
S7 SPAKXD753WJZZ - PACKING FOAM BOTTOM
S8 SSAKA0005PEZZ - SACK FOR MANUAL
S9 SSAKHA050WJZZ - SACK FOR SCREW
S10 TLABV0182AJZZ - NO CARD
[11] SERVICE JIGS (USE FOR SERVICING)
N QCNW-C222WJQZ AW V L=1000mm 80pin LCD Control to LCD Panel, x2
N QCNW-F676WJQZ BH V L=1000mm 41pin Main to LCD Control (LW)
N QCNW-G405WJQZ AP V L=1000mm 4pin Main to LCD Control (PL)
N QCNW-N125WJPZ BC V L=1000mm 24pin Main TO Power (PD)
12
LC-60LE631M/X-WH
13
LC-60LE631M/X-WH
14
LC-60LE631M/X-WH
15
LC-60LE631M/X-WH
16
EndPage
COPYRIGHT © 2012
COPYRIGHT XXXXBY SHARP CORPORATION
BYSHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in
COPYRIGHT © XXXX
any form BYSHARP
or by any CORPORATION
means, electronic, mechanical,
photocopying, recording, or otherwise, without
priorALL
written permission
RIGHTS of the publisher.
RESERVED.
No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.
RQ203
JAN2013 Printed in Malaysia SHARP MANUFACTURING
Design and Production Information CORPORATION (M) SDN. BHD
Design :SEM PQA DEPARTMENT
Production :SMM Batu Pahat, Johor,
SELVA SMM Malaysia
–1

Service Manual: MODEL:LC-60LE631M-WH LC-60LE631X-WH

Uploaded by

Copyright:

Available Formats

Service Manual: MODEL:LC-60LE631M-WH LC-60LE631X-WH

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: MODEL:LC-60LE631M-WH LC-60LE631X-WH

Uploaded by

Copyright:

Available Formats

TopPage

LCD COLOUR TELEVISION

This document has been published to be used for

This model is based on the LC-60LE630M/X and partially modified.

DIFFERENCES FROM BASE MODEL KEYMF904FM10 (60LE631M-WH) Part code changed

LIST OF CHANGED PARTS KEYMF904FM12 (60LE631X-WH) Part code changed

Ref. No. Description LC-60LE630M/X LC-60LE631M/X-WH Note

IMPORTANT SERVICE SAFETY PRECAUTION

PRECAUTIONS FOR USING LEAD-FREE SOLDER

Employing lead-free solder

Using lead-free wire solder

MAJOR SERVICE PARTS

MAJOR SERVICE PARTS

Ref No. Part No. Description

Ref No. Part No. Description

Ref No. Part No. Description Q’ty

Item Model LC-60LE631M-WH / LC-60LE631X-WH

LCD panel 60" (1525 mm) Active Matrix type a - Si TFT

CHAPTER 3. OPERATION MANUAL

4 Attaching the s tand cover.

2 Attach the s upporting pos t for the s tand unit onto

3 Ins ert the s tand into the openings on the bottom

CHAPTER 5. REMOVING OF MAJOR

[1] REMOVING OF MAJOR PARTS

1. Removing of the Stand Unit and Rear Cabinet VIN

3. Disconnect AC Cord [5]. OF

3. R emoving of S peaker (L/R)

4. Removing of the PWB Units

R/C LED Unit 5

LCD CONTROL Unit 13

5. Removing of the LCD Panel Module Unit

[ 2 ] PRECAUTIONS FOR ASSEMBLY

(Work method of Rear Cabinet fixation)

Front Cabinet Ass'y

(Front Cabinet Ass’y/Rear Cabinet fingernail fixation place)

[3] THE way of detaching Rear Cabinet

[Precaution when removing the rear cabinet]

Speaker fall down.

[Precaution when mounting the rear cabinet]

With [RF] signal input No video onscreen (1)

No video in the UHF/VHF reception

No audio heard (1)

No sound in the UHF/VHF reception.

No audio heard (2)

No external audio heard

No audio heard (3)

No HDMI sound heard. HDMI1

No audio heard (4)

No sound from the HDMI sound input terminal.

No audio heard (5)

CHAPTER 7. OVERALL WIRING /

[2] SYSTEM BLOCK DIAGRAM

Right-Audio-Left VIDEO INPUT 4

Right-Audio-Left VIDEO INPUT 4

[1] OVERALL WIRING DIAGRAM

main DUNTKF904FM10 60LE631M

C2732 C2739 R2771

Downloaded from www.Manualslib.com manuals search engine

R3503 R3504 R3359