Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Relief Valve VENTABLE RVCALAN - T11A RV1

    Uploaded by

    Hassan Khattab
    This document provides information about a ventable, pilot-operated, balanced piston relief valve model RVCA. It is normally closed and regulates pressure by throttling flow to tank when inlet pressure reaches the valve setting. It has a vent port that connects to the main piston and pilot stage, allowing for remote control. These valves are accurate, have smooth operation, and moderate response time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Relief Valve VENTABLE RVCALAN - T11A RV1

    Uploaded by

    Hassan Khattab
    22 views1 page
    This document provides information about a ventable, pilot-operated, balanced piston relief valve model RVCA. It is normally closed and regulates pressure by throttling flow to tank when inlet pressure reaches the valve setting. It has a vent port that connects to the main piston and pilot stage, allowing for remote control. These valves are accurate, have smooth operation, and moderate response time.

    Original Title

    relief valve VENTABLE RVCALAN_T11A RV1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a ventable, pilot-operated, balanced piston relief valve model RVCA. It is normally closed and regulates pressure by throttling flow to tank when inlet pressure reaches the valve setting. It has a vent port that connects to the main piston and pilot stage, allowing for remote control. These valves are accurate, have smooth operation, and moderate response time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views1 page

    Relief Valve VENTABLE RVCALAN - T11A RV1

    Uploaded by

    Hassan Khattab
    This document provides information about a ventable, pilot-operated, balanced piston relief valve model RVCA. It is normally closed and regulates pressure by throttling flow to tank when inlet pressure reaches the valve setting. It has a vent port that connects to the main piston and pilot stage, allowing for remote control. These valves are accurate, have smooth operation, and moderate response time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MODEL Ventable, pilot-operated, balanced piston relief valve

    RVCA SERIES 1 / CAPACITY: 15 gpm / CAVITY: T-11A

    sunhydraulics.com/model/RVCA

    Ventable, pilot-operated, balanced piston relief cartridges are normally closed pressure regulating valves. When the
    pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to
    CONFIGURATION regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to
    provide for remote control by other pilot or 2-way valves. These valves are accurate, have low pressure rise vs.
    L Control Standard Screw Adjustment flow, they are smooth and quiet, and are moderately fast.

    A Adjustment 100 - 3000 psi (7 - 210 bar),


    Range 1000 psi (70 bar) Standard
    TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

    Setting
    Factory Pressure Settings Established at 4 gpm
    N Seal Material Buna-N
    Maximum Operating Pressure 5000 psi
    (none) Material/Coating Standard Material/Coating
    Control Pilot Flow 7 - 10 in³/min.
    Maximum Valve Leakage at 110 SUS (24 cSt) 2 in³/min.@1000 psi
    Response Time - Typical 10 ms
    Adjustment - No. of CW Turns from Min. to Max. setting 5
    Locknut Hex Size 9/16 in.
    Locknut Torque 80 - 90 lbf in.
    Seal kit - Cartridge Buna: 990011007
    Seal kit - Cartridge EPDM: 990011014
    Seal kit - Cartridge Polyurethane: 990011002
    Seal kit - Cartridge Viton: 990011006

    NOTES For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.

    CONFIGURATION OPTIONS Model Code Example: RVCALAN


    CONTROL (L) ADJUSTMENT RANGE (A) SEAL MATERIAL (N) MATERIAL/COATING
    L Standard Screw Adjustment A 100 - 3000 psi (7 - 210 bar), 1000 psi N Buna-N Standard Material/Coating
    C Tamper Resistant - Factory Set (70 bar) Standard Setting E EPDM /AP Stainless Steel, Passivated
    K Handknob W 150 - 4500 psi (10,5 - 315 bar), 1000 V Viton /LH Mild Steel, Zinc-Nickel
    O Handknob with Panel Mount psi (70 bar) Standard Setting
    B 50 - 1500 psi (3,5 - 105 bar), 1000 psi
    (70 bar) Standard Setting
    C 150 - 6000 psi (10,5 - 420 bar), 1000
    psi (70 bar) Standard Setting
    D 25 - 800 psi (1,7 - 55 bar), 400 psi (28
    bar) Standard Setting
    E 25 - 400 psi (1,7 - 28 bar), 200 psi (14
    bar) Standard Setting

    c 2019 Sun Hydraulics


    1 of 1

    You might also like