Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Instruction Sheet Is-Ror2824 Style Number:: ROR2824AH, ROR2818AH

    Uploaded by

    dayshift5
    1) The document provides assembly instructions for a pendant light fixture. 2) It involves connecting various fixture parts like the center rod, side rod, and socket assembly. 3) The fixture is then installed by securing the crossbar to the outlet box, attaching the canopy chain loop and ceiling canopy, and connecting the house wiring to the fixture wiring.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Instruction Sheet Is-Ror2824 Style Number:: ROR2824AH, ROR2818AH

    Uploaded by

    dayshift5
    41 views5 pages
    1) The document provides assembly instructions for a pendant light fixture. 2) It involves connecting various fixture parts like the center rod, side rod, and socket assembly. 3) The fixture is then installed by securing the crossbar to the outlet box, attaching the canopy chain loop and ceiling canopy, and connecting the house wiring to the fixture wiring.

    Original Title

    IS-ROR2824

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document provides assembly instructions for a pendant light fixture. 2) It involves connecting various fixture parts like the center rod, side rod, and socket assembly. 3) The fixture is then installed by securing the crossbar to the outlet box, attaching the canopy chain loop and ceiling canopy, and connecting the house wiring to the fixture wiring.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views5 pages

    Instruction Sheet Is-Ror2824 Style Number:: ROR2824AH, ROR2818AH

    Uploaded by

    dayshift5
    1) The document provides assembly instructions for a pendant light fixture. 2) It involves connecting various fixture parts like the center rod, side rod, and socket assembly. 3) The fixture is then installed by securing the crossbar to the outlet box, attaching the canopy chain loop and ceiling canopy, and connecting the house wiring to the fixture wiring.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    INSTRUCTION SHEET IS-ROR2824

    6 CORPORATE PARKWAY
    GOOSE CREEK , SC . 29445 STYLE NUMBER: ROR2824AH, ROR2818AH
    www . quoizel . com
    Note: If fixture is pre-assembled, please start at STEP 2.
    PACKAGE CONTENTS ISSUED 04-2010 REVISED 2010-08-03

    PART DESCRIPTION QUANTITY


    A
    A Crossbar 1 pc
    1 pc B
    B Green Ground Screw
    2 pcs C
    C Hex Nut
    Nipple 1 pc D
    D
    E Lock Washer 2 pcs E

    F Canopy Chain Loop 1 pc J K


    F
    G Canopy Lock Ring 1 pc
    H Fixture Chain 1 pc G

    I Ceiling Canopy 1 pc H

    J Center Rod with Fixture Loop 1 pc


    I
    K Side Rod 1 pc
    L Socket Assembly 1 pc
    M Abalone Shell (For Replacement) 5 pcs

    WARNINGS AND CAUTIONS


    WARNING:
    ● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
    off the circuit breaker or removing the fuse.
    CAUTION:
    ● These instructions are provided for your safety. It is very important that they are read completely before the
    installation of your fixture. We strongly recommend that a professional electrician install the fixture.
    ● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient
    time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.

    IMPORTANT
    ● The abalone shells on this fixture are native to the South Pacific and their use complies with government
    regulations. These shells inherently vary in size and shape, therefore some hang straight while others are
    slightly titled. After the pendant is installed, the shells should be rotated or manipulated to obtain as much
    uniformity as their natural form allows.

    1 OF 5
    PREPARATION STYLE NUMBER: ROR2824AH, ROR2818AH

    ● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
    list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
    product. Contact customer service for replacement part.
    ● Estimated Assembly Time: 30 - 45 minutes
    ● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
    Wire cutter, Safety glasses and (3) 60W B10 candelabra base bulbs .
    ● Helpful Tools (not included): Wire strippers.

    INSTALLATION INSTRUCTIONS

    STEP 1: Loop
    a. Screw the nipple end of the Center Rod into the
    Coupling on the top center of the Socket Assembly.
    Please line up the Loops at the Top Ring and the Loops
    at the top edge of the Socket Assembly before Top Ring
    tightening them together until snug.
    b. Attach one end of the Side Rod to the Loop at the Top Side Rod
    Ring. Attach the another end of the Side Rod to the
    Loop at the top edge of the Socket Assembly.

    Center Rod

    Coupling Loop

    Socket
    Assembly

    STEP 2:
    a. Secure the Crossbar onto the Outlet Box with Outlet
    Box Screws. Tighten until snug. Outlet Box

    Crossbar

    Outlet Box
    Screw

    2 OF 5
    INSTALLATION INSTRUCTIONS STYLE NUMBER: ROR2824AH, ROR2818AH

    STEP 3:
    a. Thread one Hex Nut onto top end of the Nipple.
    b. Place one Lock Washer over the top end of the Nipple
    and then thread the Nipple into the center lock hole of
    the Crossbar. Lock Washer
    c. Using pliers, thread the Hex Nut against the Crossbar Crossbar
    and hand-tighten until snug. Hex Nut

    Nipple

    STEP 4:
    a. Thread another Hex Nut onto the end of the Nipple.
    b. Place the Lock Washer over the end of the Nipple and
    then thread the Canopy Chain Loop onto the end of the
    Nipple.
    c. Using pliers, thread the Hex Nut against the Canopy Nipple
    Chain Loop and hand-tighten until snug.

    Hex Nut

    Lock Washer

    Canopy Chain Loop

    STEP 5:
    a. Push the Ceiling Canopy upward over the Outlet Box. Outlet Box
    Thread the Canopy Lock Ring onto the Canopy Chain
    Loop and tighten until snug to secure the Ceiling
    Canopy.

    Canopy Chain Loop

    Ceiling Canopy

    Canopy Lock Ring

    3 OF 5
    INSTALLATION INSTRUCTIONS STYLE NUMBER: ROR2824AH, ROR2818AH

    STEP 6:
    a. Adjust the Fixture Chain to your desired length by
    removing the links if needed. You may need to use
    Canopy Chain Loop
    pliers to open the chain links. If so, put a cloth over the
    chain to protect the finish from the pliers.
    b. Attach one end of the Fixture Chain onto the Canopy
    Chain Loop and then attach the other end of the Fixture
    Chain onto the Fixture Loop on the top of the fixture. Fixture Chain

    Supply Wires

    Fixture Loop

    STEP 7:
    a. Pull the Supply Wires up through the Fixture Chain
    alternating links. Push the wires up through the Canopy
    Canopy Chain Loop
    Chain Loop into the outlet box.

    Fixture Chain

    Supply Wires

    4 OF 5
    INSTALLATION INSTRUCTIONS STYLE NUMBER: ROR2824AH, ROR2818AH

    STEP 8:
    a. Un-thread the Canopy Lock Ring and slide Canopy Outlet Box
    Lock Ring and Ceiling Canopy down the Fixture Chain.
    b. Push all slack fixture wire through Canopy Chain Loop
    into Outlet Box. Trim excess fixture wire leaving a
    minimum of 6 in. Hanging out of the Outlet Box.
    c. Refer to STEP 9 to connect the wires. Canopy Chain Loop
    d. Re-attach the Ceiling Canopy as shown in STEP 5.

    Fixture Chain

    Ceiling Canopy

    Canopy Lock Ring

    STEP 9:
    Use Wire Connectors (not supplied) to connect the
    WHITE OR RIBBED WHITE OR RIBBED
    wires.
    a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
    Wire.
    b. Connect the House White (or Ribbed) Wire to the
    Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
    c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
    FROM HOUSE
    Supply Wire (Black or Smooth Side).
    d. Wrap each connection with approved electrical tape
    and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
    Outlet Box.
    FROM HOUSE FROM FIXTURE

    STEP 10:
    a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.

    Your installation is completed now. Restore electricity. Retain this sheet for future reference.

    5 OF 5

    You might also like