www.tsurumi-global.

com

SERIES

KRS
SUBMERSIBLE
DEWATERING PUMPS
 Submersible General-Purpose Dewatering Pumps
Tsurumi's KRS-series of submersible heavy-duty pumps are designed and built to
handle high volume pumping jobs. The series offers three types of pumps: a basic
(standard) type that is available in a wide product lineup, an energy-saving type of low
output and low head that reduces power consumption, and a slurry dewatering type
that is equipped with a high-chromium cast iron impeller and agitator.
Also offered are KRSU-series submersible pumps for bypassing sewage in sewer
renewal work, which optionally come in a flange connection type for countermeasures
to floods. Furthermore, after many years of research and application, Tsurumi has an
optional seawater-resistant version that can draw and drain seawater over extended
periods of time. All in all, KRS-series pumps are of multiple-purpose build and widely
applicable.

KRS-series pumps are available in a broad product lineup with discharge bore
diameters of 80 to 250 mm, and motor outputs of 2.2 to 22 kW. All models integrate
original technologies that Tsurumi has over the years researched and proven in the
field, including Tsurumi's original anti-wicking cable, dual inside mechanical seals with
silicon carbide faces and Oil Lifter, etc.
Tsurumi pumps have and continue to play an active role in a wide range of
applications, covering civil engineering and construction work that requires high
reliability, large-scale construction projects such as tunnels, bridges and dams, and
infrastructure for provisional drainage of sewage, simplified rainwater drainage for
flood countermeasures, etc.

KRS
KRS
Drainage Pumps
(Energy-Saving)
Energy-saving Drainage Pumps

KRS
(Slurry)
KRSU
Submersible Pump for
Slurry Pumps Sewage Bypass

01 TS URUMI P UMP T SURUMI PUMP 02

 Options
KRS: Multi-purpose drainage pumps available in a wide product lineup
  Seawater-Resistant Version
KRS (Enegry-Saving): Drainage pumps of low output and low head that reduce power
Tsurumi's pumps can be combined with a seawater-resistant kit (optional) that
consumption adds a “galvanic anode” and “seawater-resistant special cast iron impeller,”
KRS (Slurry): Slurry pumps that deliver powerful agitation for and enables about two years of service. (The service period depends on
operating conditions.) For details, refer to the Seawater-Resistant Pumps
discharging slurries laden with silt, earth, sand or other particulate catalog [IB115].
KRSU: Submersible pump for provisional sewage bypass between manholes Conversion to
Seawater-Resistant Pump

Selection Table
Motor Output 2.2-3.7 4-5.5 6-7.5 9-11 15-18.5 22
kW kW kW kW kW kW
3” 80mm
4” 100mm
KRS 6” 150mm
8” 200mm
10” 250mm
4” 100mm
KRS High Temperature Liquids Version
-Enegry-Saving- 6” 150mm
Tsurumi's pumps are applicable to high temperature liquids of up to 80°C. Pumps of the standard
8” 200mm specification can discharge liquids of up to 40°C. However, there are many fields that need to discharge
3” 80mm higher temperature liquids, e.g., discharging industrial water from a power plant or ironworks, or
discharging hot spring water from a mine in a volcanic zone.
KRS 4” 100mm
-Slurry-
6” 150mm High Voltage Version
8” 200mm Tsurumi's pumps can be manufactured to between 380 - 1000V ratings that are often required for mining
applications. The pumps meet mining safety standards as they come with screened cables and motors with
KRSU 6” 150mm built-in diodes for ground-fault checks.

Flange Connection Type Pump for Flood Countermeasures

Tsurumi offers pumps of flange connection type as countermeasures to river flooding and submerged roads
caused by large-scale natural disasters (hurricanes, squalls, local downpours, etc.), which have occurred
more frequently in recent years.
By using the flange connection type, the KRS-series pumps can also serve as simplified rainwater drainage pumps.
Since the flange connection type can be easily installed and removed, and features the sound reliability,
durability and maintainability demanded of construction work, the pump can make a contribution as a
countermeasure to floods.

03 TS URUMI P UMP T SURUMI PUMP 04

 Top Discharge, Side Flow Design
This design assures efficient motor cooling even if the pump runs
with its motor exposed to air, and also allows the overall diameter of
the pump to be reduced for installation in confined spaces.
* Model KRS1022 is a top discharge, flow-thru design. It provides maximum motor
cooling efficiency allowing continuous operation at low water levels and extended
dry-run capability.

Model Model

KRS2-D6 KRS2-150
(Slurry)
2 2

1
1 3
3

4
5
4 6
5
6 8

1 Anti-wicking Cable Entry 5 Oil Lifter

Prevents water incursion due to capillary action should the cable sheath be damaged or the end of cable Provides lubrication and cooling of the seal faces down to 1/3 of normal oil level, thus maintaining a stable shaft
submerged. Also prevents moist air from infiltrating the motor housing and condensation from forming inside the sealing effect and prolonging seal life longer. The Oil Lifter is Tsurumi original design.
housing due to temperature differences between the housing and outside air.
6 Oil Seal
2 Cable Clip Used as a “Dust Seal”, it protects the mechanical seal from abrasive particles.
Prevents unexpected water incursion that can occur if the cable is damaged, by protecting the cable against the
tugging and rough handling found at construction sites. 7 Ductile Cast Iron Semi-open Impeller (KRS & KRS-Energy-Saving-)
Ductile Cast Iron Semi-vortex Impeller (KRSU)
3 Circle Thermal Protector Resists wear caused by abrasive particles and enables the pump to maintain its original performance for an
Directly cuts the motor circuit if excessive heat builds up or overcurrent occurs in the motor. extended period of time.
4 Dual Inside Mechanical Seals with Silicon Carbide Faces 8 High-chromium Cast Iron Semi-open Impeller & Suction Plate (KRS-Slurry-)
Isolated in the oil chamber where a clean, non-corrosive and abrasion-free lubricating environment is maintained. Made of high-chromium cast iron ensuring highest durability. Even if the performance drops due to wearing out of the
Compared with the water-cooled outside mechanical seal, it reduces the risk of failure caused by dry-heating and impeller and/or suction plate, it can be improved by simply replacing the suction plate.
adhering matter. The silicon carbide provides 5 times higher corrosion, wear and heat resistance than the tungsten * KRS-200 has an adjustable suction plate
carbide. Rubber parts of the upper and lower fixing rings are made of NBR or FPM (FKM), which provides higher
resistance to heat and chemicals. 9 Agitating Mechanism (KRS-Slurry-)
Consists of a shaft-mounted agitator and a dedicated strainer. The agitator made of high-chromium cast iron resists
wear caused by abrasive particles, and it suspends solids to assist in pumping sediments in combination with the
strainer.

05 TS URUMI P UMP T SURUMI PUMP 06

 KRS Performance Curves
< 80-150mm >
Multi-purpose drainage pumps available in a wide product lineup S.S. 1500min-1 S.S. 1800min-1
24 24
The KRS-series is a submersible three-phase cast iron high volume heavy-duty drainage pump. The cast
iron body, combined with the low speed motor, presents extra durability for use in the most demanding 20 20
conditions. The top discharge, side flow design assures efficient motor cooling even when it operates with its
motor exposed to air.* KR KR

K
S2 S2

R
R
-D

S2
-B

Total Head (m)

Total Head (m)

S2
* Model KRS1022 is a top discharge, flow-thru design. It provides maximum motor cooling efficiency allowing continuous operation at 6 6

-B
-D
KR

3
low water levels and extended dry-run capability.

3
KR S2

K
R
S2 -A

R
S2
4

S2
-C

-
10 10

C
4

-A
KR
KR

6
S2
S2

KR
KR

-B4
-D4

S2
S2

-A 3
-C3
0 0
0 1 2 3 4 0 1 2 3 4
Capacity (m 3 /min) Capacity (m 3 /min)

< 200・250mm >

S.S. 1500min-1 S.S. 1800min-1
36 36
KRS2-A3 KRS1022

K
K

R
R
KR KR

S8
S8
30 30
S8 S8

22
22
19 19
KRS KRS
822
822 L
L

Total Head (m)

Total Head (m)

KR
20 KRS 20 S8
815 15
Discharge Model Motor Starting Solids Dimensions Dry Cable
Phase LxWxH Weight*2 KR KR
Bore 50/60Hz Output Method Passage Length S2 S2
50/60Hz 50/60Hz -8S -8S
mm kW mm mm kg m KRS10 KR
10 22 10 S10
22
80 KRS2-C3/A3 2.2 D.O.L.* 1
12 340 x 311 x 619 72 8

80 KRS2-D3/B3 3.7 D.O.L.*1 12 362 x 346 x 704/ 91/89 8

349 x 320 x 704
100 KRS2-C4/A4 3.7 D.O.L.*1 12 349 x 320 x 719 88 8 0 0
0 5 10 12 0 5 10 12
5.5 D.O.L.*1 12 362 x 346 x 709/ 98/95 8
100 KRS2-D4/B4 349 x 320 x 709 Capacity (m 3 /min) Capacity (m 3 /min)
150 KRS2-C6/A6 7.5 D.O.L.*1 20 415 x 374 x 765 130 8

150 KRS2-D6/B6 11 D.O.L.*1 20 433 x 407 x 812/ 158/150 8

415 x 374 x 810
Three
200 KRS2-8S 11 D.O.L.* 1
30 473 x 409 x 933 174 8

200 KRS815 15 D.O.L.*1 25 481 x 440 x 1069 240 8

200 KRS819 18.5 D.O.L.* 1

25 576 x 530 x 1241 360 10

200 KRS822 22 D.O.L.*1 25 576 x 530 x 1241 380 10

200 KRS822L 22 D.O.L.*1 25 576 x 530 x 1241 380 10

250 KRS1022 22 D.O.L.*1 25 525 x 524 x 1419 390 10

* Star-Delta available upon request
1

*2 Weights excluding cable

07 TS URUMI P UMP T SURUMI PUMP 08

 KRS (Energy-Saving) KRS (Slurry)
Drainage pumps of low output and low head that reduce power consumption Slurry pumps that deliver powerful agitation for
The KRS-series of energy-saving type is a submersible three-phase cast iron high volume heavy-duty discharging slurries laden with silt, earth, sand or other particulate
drainage pump. It consumes less energy than the standard KRS-series at lower head applications. The cast The KRS-series of slurry-handling type is a submersible three-phase cast iron heavy-duty slurry pump. It is
iron body, combined with the low speed motor, presents extra durability for use in the most demanding equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. The
conditions. The top discharge, side flow design assures efficient motor cooling even when it operates with its other wear parts such as the impeller and the suction plate are also made of high-chromium cast iron for
motor exposed to air. extra durability. The top discharge, side flow design assures efficient motor cooling even when it operates
with its motor exposed to air.

KRS2-69 KRS2-89 KRS2-80 KRS2-150

Performance Curves Performance Curves

S.S. 1500min-1 S.S. 1800min-1 S.S. 1500min-1 S.S. 1800min-1
22 22 35 35
20 20
KR 30 30
KR KR
K

S2
R

S- -6 S-
S2

65 9 65
.5 KR
-6

.5 KR
9

S-
Total Head (m)

Total Head (m)

Total Head (m)

Total Head (m)

S- 20
20 0
KR

20 0 20
KR

S-

KR KR
S-

43

S2 S2
43

10 10
KR KR KR -1 KR -1
S2 S2 S2 50 50
S2
KRS -8 KRS -8 -1 -1
9 -63 9 10 00 10 00
-63 KR

K
KR

R
S-8

S2

S2
S- 5.5
85

-8

-8
.5

0
0 0 0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6 0 1 2 3 4 5 0 1 2 3 4 5
Capacity (m /min)3
Capacity (m /min)
3
Capacity (m /min) 3
Capacity (m /min) 3

Discharge Motor Starting Solids Dimensions Dry Cable Discharge Motor Starting Solids Dimensions Dry Cable
Bore Model Output Phase Method Passage LxWxH Weight*2 Length Bore Model Output Phase Method Passage LxWxH Weight*2 Length
50/60Hz 50/60Hz
mm kW mm mm kg m mm kW mm mm kg m

100 KRS-43 3 D.O.L.* 1

12 378 x 347 x 723 95 8 80 KRS2-80 4 D.O.L.* 1
30 349 x 326 x 800 105 8

150 KRS-63 3 D.O.L.*1 15 384 x 365 x 866 97 8 100 KRS2-100 6 D.O.L.*1 30 415 x 374 x 835 143 8
Three
150 KRS-65.5 5.5 D.O.L.*1 20 425 x 370 x 790 118 8 150 KRS2-150 9 D.O.L.*1 30 433 x 407 x 898/ 170/162 8
415 x 374 x 898
Three
150 KRS2-69 9 D.O.L.* 1
20 490 x 424 x 812 155 8 200 KRS-200 18 D.O.L.* 1
30 576 x 530 x 1140 395 10

200 KRS-85.5 5.5 D.O.L.*1 20 446 x 413 x 941 126 8 * Star-Delta available upon request
1

*2 Weights excluding cable

200 KRS2-89 9 D.O.L.*1 30 473 x 408 x 933 175 8
*1 Star-Delta available upon request
*2 Weights excluding cable

09 TS URUMI P UMP T SURUMI PUMP 10

 KRSU
Submersible pump for provisional sewage bypass between manholes Submersible Sewer Bypass Pumping
The KRSU822 pump of submersible three-phase cast iron heavy-duty pump is designed and built specifically
for temporarily bypassing drainage in sewer construction work. With a maximum head of 26.5 m, maximum
capacity of 5.7 m3/min, and space-saving design of 546 mm in diameter, this pump plays an active role in
drainage in the deep confined space of a manhole.
Also, with its semi-vortex structure, this pump provides a large solids passage of 56 mm in diameter, which
prevents any clogging of solids matter. The top discharge, side flow design assures efficient motor cooling even
when operating with the motor exposed to air.

KRSU822
KRSU822
Downstream
Shutoff plug
Performance Curves
work area
30
S.S. 1500min-1
30
S.S. 1800min-1
Upstream Construction

KR KR
SU SU
20 82 20
2 82
Total Head (m)
Total Head (m)

Since sewage piping suffers from aging-related deterioration and can be damaged by earthquakes, sewage
10 10
piping requires repairs and replacing at regular intervals. In sewage piping repair work, consideration should
be given to area residents inconvenienced by the repair work, and additionally to work efficiency and the
safety and health of workers who handle inflow sewage. For this purpose, provisional draining that
temporarily bypasses sewage via a pump is extremely effective.

0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6 As a pump for bypassing sewage between manholes in sewage piping renewal work, Tsurumi offers the
Capacity (m /min)
3
Capacity (m /min)3
KRSU822 pump of submersible sewer bypass pump. This pump features a maximum head of 26.5 m, a
maximum capacity of 5.7 m3/min, and a compact space-saving design of just 546 mm in diameter. Normally,
with engine pumps, it is difficult to suck up fluid from a depth of 7 m or more, but the KRSU submersible
Discharge Motor Starting Solids Dimensions Dry Cable
Model Phase
Bore Output Method Passage LxWxH Weight*2 Length pump can fit in the deep limited confines of a manhole and there play an active role in draining the manhole.
mm kW mm mm kg m In addition, with its semi-vortex structure, this pump provides a large solids passage of 56 mm in diameter,
which prevents clogging of solids matter. In fact, it is particularly effective towards preventing clogging of
200 KRSU822 22 Three D.O.L.* 1
56 546 x 500 x 1486 430 10
fibrous solids in the impeller, which is the biggest problem in draining sewage. The stand has a bottom plate
* Star-Delta available upon request
1

*2 Weights excluding cable

structure so that the pump can stably stand by itself even when the pump is placed on earth, sand or sludge.
The KRSU822 has a top discharge, side flow structure that effectively cools the motor even when the pump
runs with the motor exposed to air. Thus, the KRSU822 is highly suited as a bypass pump.

11 TS URUMI P UMP T SURUMI PUMP 12

 Specifications
KRS KRS KRS (Energy-Saving) KRS (Slurry) KRSU
KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRS KRSU
2-C3/A3 2-D3/B3 2-C4/A4 2-D4/B4 2-C6/A6 2-D6/B6 2-8S 815 819 822 822L 1022 -43 -63 -65.5 2-69 -85.5 2-89 2-80 2-100 2-150 -200 822

Discharge Bore mm 80 100 150 200 250 100 150 200 80 100 150 200

JIS
Discharge Connection Hose Coupling Hose Coupling 10kg/cm2
Flange

Solids Passage mm 12 20 30 25 25 12 15 20 30 56

Semi-open Closed Semi-open Semi-

vortex
Impeller
Ductile Cast Iron Ductile Cast Iron High-chromium Cast Iron Gray
Cast Iron
PUMP

Suction Cover Gray Cast Iron Gray Cast Iron

Suction Plate High-chromium Cast Iron

Oil Seal Nitrile Butadiene Rubber Nitrile Butadiene Rubber

Casing Gray Cast Iron Gray Cast Iron

Dual Inside Mechanical Seals (with Oil Lifter) Dual Inside Mechanical Seals (with Oil Lifter)
Shaft Seal
Silicon Carbide Silicon Carbide

Agitator High-chromium Cast Iron

Type Continuous-duty Rated, Dry-type Induction Motor Continuous-duty Rated, Dry-type Induction Motor

Output kW 2.2 3.7 5.5 7.5 11 15 18.5 22 22 3 5.5 9 5.5 9 4 6 9 18 22

Phase Three Three

Pole 4 4

Insulation E B F F E B E B E B F

Starting Method D.O.L.*2 D.O.L.*2

MOTOR

Motor Protector
(built-in) CTP CTP

ml 1200 1850 2300 3200 6500 4000 1440 1960 2300 1960 2300 1850 2300 6500
Lubricant
Turbine Oil (ISO VG32) Turbine Oil (ISO VG32)

Frame Gray Cast Iron Gray Cast Iron

Shaft 420 Stainless Steel 420 Stainless Steel

m 8 10 10 8 10
Power Cable
Chloroprene Rubber Chloroprene Rubber

Dry Weight*1
kg 72 91/89 88 98/95 130 158/150 174 240 360 380 390 95 97 118 155 126 175 105 143 170/162 395 430
50/60Hz
*1 Weights excluding cable
*2 Star-Delta available upon request

13 TS URUMI P UMP T SURUMI PUMP 14

 www.tsurumi-global.com

We reserve the right to change the specifications and designs without prior notice. The OO series and model OO are indicated with our series/model codes in this catalog.

Your Dealer

© 2021 TSURUMI MANUFACTURING CO., LTD.

Printed in Japan IB111-C NPC-X-C-Y