This document provides information about supporting SMB version 2.0 (SMBv2) on older Office A3 product models, specifically the "e" series and 4 series devices. It states that SMBv2 support can be enabled on these older products by installing the latest special "Version Up" firmware. It also provides instructions for enabling either SMBv1 and SMBv2 or just SMBv2 through a dip switch setting once the updated firmware is installed.
This document provides information about supporting SMB version 2.0 (SMBv2) on older Office A3 product models, specifically the "e" series and 4 series devices. It states that SMBv2 support can be enabled on these older products by installing the latest special "Version Up" firmware. It also provides instructions for enabling either SMBv1 and SMBv2 or just SMBv2 through a dip switch setting once the updated firmware is installed.
This document provides information about supporting SMB version 2.0 (SMBv2) on older Office A3 product models, specifically the "e" series and 4 series devices. It states that SMBv2 support can be enabled on these older products by installing the latest special "Version Up" firmware. It also provides instructions for enabling either SMBv1 and SMBv2 or just SMBv2 through a dip switch setting once the updated firmware is installed.
This document provides information about supporting SMB version 2.0 (SMBv2) on older Office A3 product models, specifically the "e" series and 4 series devices. It states that SMBv2 support can be enabled on these older products by installing the latest special "Version Up" firmware. It also provides instructions for enabling either SMBv1 and SMBv2 or just SMBv2 through a dip switch setting once the updated firmware is installed.
Title Support of SMB ver2.0 (SMBv2) - Office A3 Products
Language English
Release date 2017-08-11
Description
Background:
Microsoft recommended the invalidation of SMB Ver1.0 in order to cope
with the Ransomware (WannaCry) issues.
Whilst the newer 'IT5" A3 Office Products (7&8 Series) support SMBv2 as standard (and even SMBv3 is available) the older 4e Series and 4 Series products only supported SMBv1. However, support for SMBv2 on these older products is now available as follows:
“e” Series Devices
bizhub C224e C284e C364e C454e C554e - Latest Mass Production
Firmware GDB-M1 or later bizhub C654e C754e – Latest Mass Production Firmware GDB-M0 or later
bizhub Mono 224e 284e 364e 454e 554e - Latest Mass Production Firmware GDB-M1 or later bizhub Mono 654e 754e - Latest Mass Production Firmware GDB-M0 or later
SMBv2 is only available by installing the latest Special “Version Up”
Firmware, (Version GBF-M0 or later) We strongly recommend to only use this firmware in special circumstances when the customer is specifically requesting special features (Like SMBv2, Google Cloud Print, Scan to Gmail etc)
The Version Up firmware is available in DLGB1514243EN - Please ensure
you read and fully understand the Installation instructions and precautions before installing this firmware, once installed do not attempt to install any normal mass production firmware, without following the special downgrade procedures. How to enable SMBv2
Once the firmware is installed, SMBv1 and SMBv2 can be selected as
follows:
Tech Rep, System 2, Software SW Setting:
DipSW No.219 - SMB versions for the SMB client functions:
Software SW No.219 Hex 00: SMB1.0/2.0 are available. (default)
Software SW No.219 Hex 04: Only SMB2.0 is available.
Important Note:
When SMB V2.0 is enabled, there are the following restrictions:
a) "Machine Auto Update" using SMB is not supported.
b) For Mac OS 10.x, ScanToSMB and Browsing are not supported with SMB2.0.
