Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    Instructions: Rapid Prototyping Technology For Product Development

    Uploaded by

    muhadir
    The document provides instructions for downloading course materials and software for a rapid prototyping technology course. It lists four folders that contain lab guides, lecture slides, PDF modules, and SRP player software that should be downloaded. It also lists four software - ProjectLibre, Fusion 360, ideaMaker, and SRP Player - that must be downloaded and installed prior to the course. Detailed steps are provided for installing the SRP Player software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Instructions: Rapid Prototyping Technology For Product Development

    Uploaded by

    muhadir
    76 views2 pages
    The document provides instructions for downloading course materials and software for a rapid prototyping technology course. It lists four folders that contain lab guides, lecture slides, PDF modules, and SRP player software that should be downloaded. It also lists four software - ProjectLibre, Fusion 360, ideaMaker, and SRP Player - that must be downloaded and installed prior to the course. Detailed steps are provided for installing the SRP Player software.

    Original Title

    Course Instructions

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for downloading course materials and software for a rapid prototyping technology course. It lists four folders that contain lab guides, lecture slides, PDF modules, and SRP player software that should be downloaded. It also lists four software - ProjectLibre, Fusion 360, ideaMaker, and SRP Player - that must be downloaded and installed prior to the course. Detailed steps are provided for installing the SRP Player software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    76 views2 pages

    Instructions: Rapid Prototyping Technology For Product Development

    Uploaded by

    muhadir
    The document provides instructions for downloading course materials and software for a rapid prototyping technology course. It lists four folders that contain lab guides, lecture slides, PDF modules, and SRP player software that should be downloaded. It also lists four software - ProjectLibre, Fusion 360, ideaMaker, and SRP Player - that must be downloaded and installed prior to the course. Detailed steps are provided for installing the SRP Player software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Instructions

    RAPID PROTOTYPING TECHNOLOGY FOR PRODUCT DEVELOPMENT



    Please read carefully the instructions for downloading the course materials and
    softwares.

    1. The link to Google Drive for downloading these material are provided once
    the participants have completed the pre-assessment questionnaires.

    2. There are four folders: (i) Lab Guides (ii) Lecturer Slides (iii) PDF Module and
    (iv) SRP Player Software.

    3. Please download all materials in these folders to your PC or laptop. You must
    have a Windows operating system to ensure that the softwares will be
    successfully installed and operated. Please check if the softwares can be run
    in non-Windows operating system. Some softwares may be run in other
    operating systems.

    4. There will be four softwares used in this course. One can be found in the
    folder - SRP Player Software. The other three softwares must be downloaded
    from the link given here. Please download and install all softwares prior to
    attending this course.

    • ProjectLibre (opensource project management tool).


    Ø www.projectlibre.com (community edition)
    • Fusion 360 (design tool for students and educator)
    Ø www.autodesk.com (free trial, education use – require registration)
    • ideaMaker (3D printing tool by Raise3D).
    Ø https://www.raise3d.com/download

    3 September 2020
    • All softwares are either opensource or freeware softwares provided by
    the respective publisher (owner) except SRP Player which is a
    commercial software bundled with the CNC machine. The SRP Player has
    been provided by the authorised distributor for the milling machine
    Roland Modela MDX40A. Participants are allowed to use the SRP Player
    software throughout the course only. It is advisable that the SRP Player is
    uninstalled once the course has ended.

    Please follow these instructions for installing the SRP Player.

    1. Copy all folders in the SRP Player Software into a temp directory.
    2. Go to SRP Player Installer and double click the setup.exe file. Follow the
    instructions to install this software.
    3. Go to SRPPlayer_ver142_updater and double click the Updater.exe file.
    Follow the instructions to install this update.
    4. Go to 25D_WIN8X64_v120 and double click the SETUP64.EXE file. Follow
    the instructions to install this software. The Driver Setup window will
    open. Select Install. Then, select Model: Roland MDX-40A and Port: FILE.
    Click Start. Close the Driver Setup window when the installation is
    completed.
    5. Run the SRP Player program. Running the software for the first time may
    require some configurations. Setup for these configurations will be shown
    during the course.

    3 September 2020

    You might also like