Mark 96 Series: Sanitary Pressure Regulators
Mark 96 Series: Sanitary Pressure Regulators
Mark 96 Series: Sanitary Pressure Regulators
Sanitary Valves
housing option. See order codes
bottom page 7.
DOCUMENTATION
The following documentation is kept in an electronic data
base, and included with each order at no charge: 1 1/2" – 3"
• Steriflow Unicert - Certificate of Compliance for:
— Material, including MTR's
— Surface Finish
— FDA/USP Class VI APPLICATIONS
Each Unicert document lists the orders individual valve A wide variety of applications exist for the
Serial/Suffix numbers and wetted component Heat num- MK96 in the pharmaceutical, biotech, health-
bers. MTR’s for each Heat number follow on attached care, food & beverage and other industries.
pages. The Serial numbers and Heat numbers are directly
traceable to each individual valve.
Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
MARK 96 SERIES SANITARY PRESSURE REGULATORS
SPECIFICATIONS (CON'T)
-3-
MARK 96 SERIES SANITARY PRESSURE REGULATORS
-4-
MARK 96 SERIES SANITARY PRESSURE REGULATORS
DIMENSIONS
SAMPLE SPECIFICATION
Stainless steel sanitary pressure regulator shall be made from ASME-SA479 316L barstock material,
which includes body and all wetted metal parts. Regulator shall be activated by FDA approved, USP Class
VI certified Jorlon diaphragm. Guiding of valve stem/plug shall be outside of the wetted, process areas
of valve internal, above the diaphragm only. Regulator shall be free of threads or crevices within wetted,
process areas of valve internal and shall be self draining when installed with inlet vertical and below valve
assembly.
-6-
MARK 96 SERIES SANITARY PRESSURE REGULATORS
ORDERING SCHEMATIC
1&2 3&4 5&6 7&8 9 & 10 11 & 12 13 & 14
— — — 1
Size
075 3/4" 3 Trim Finish
100 1"
A 20Ra (Standard)
150 1-1/2" B 8Ra
200 2"
300 3"
15 DN15
DN15 Non-standard Clamp Face 4 Trim
15N*
(MK96D or MK96S only) Available in
20 DN20 Finish Cv & Seat
Valve Size
DN20 Non-standard Clamp Face 20Ra
20N* A A Cv 1.5 Hard Seat 075 - 100
(MK96D only) (Standard)
25 DN25
40 DN40 B 8Ra 1 Cv 1.5 Teflon Seat 075 - 100
50 DN50 2 Cv 1.5 Jorlon Seat 075 - 100
80 DN80 9 Cv 1.5 Peek Seat 075 - 100
B Cv 2.5 Hard Seat 100
* DIN or ISO tri-clamp face not conforming to DIN standard 32676.
C Cv 2.5 Teflon Seat 100
State face size as noted on P.O.
D Cv 2.5 Jorlon Seat 100
5 Cv 2.5 Peek Seat 100
Material H Cv 4.5 Hard Seat 100 - 150
6L ASME SA479 316L (UNS 31603) J Cv 4.5 Teflon Seat 100 - 150
6E EN 10272:2000 GR 1.4435 K Cv 4.5 Jorlon Seat 100 - 150
6 Cv 4.5 Peek Seat 100 - 150
L Cv 5.5 Hard Seat 100
M Cv 5.5 Teflon Seat 100
Body Configuration- Standard or Gauge Port* N Cv 5.5 Jorlon Seat 100
Standard - no gauge port. Leave blank 8 Cv 5.5 Peek Seat 100
90 3/4" ASME BPE Tri-Clamp gauge fitting@ 90°
180 3/4" ASME BPE Tri-Clamp gauge fitting @ 180° 7 Cv 6.1 Hard Seat 100
270 3/4" ASME BPE Tri-Clamp gauge fitting @ 270° E Cv 6.1 Teflon Seat 100
G Cv 6.1 Jorlon Seat 100
*Note: See Page 6 for Description of Gauge Ports
F Cv 6.1 Peek Seat 100
P Cv 10 Hard Seat 150 - 300
Q Cv 10 Teflon Seat 150 - 300
1 Body Finish R Cv 10 Jorlon Seat 150 - 300
A 20Ra (SFV5) Interior/40Ra Exterior (Std) 3 Cv 10 Peek Seat 150 - 300
B 20Ra (SFV5) Interior/20Ra Exterior S Cv 19 Hard Seat 200
C 8Ra Interior/40Ra Exterior*
D 20Ra (SFV5) Interior/8Ra Exterior T Cv 19 Teflon Seat 200
E 8Ra Interior/8Ra Exterior* U Cv 19 Jorlon Seat 200
F 8Ra Interior/20Ra Exterior* 4 Cv 19 Peek Seat 200
* Handle and all external surfaces meet spec per above. The adjust- V Cv 23 Hard Seat 300
ing screw is a threaded part and cannot be polished beyond 20Ra W Cv 23 Teflon Seat 300
X Cv 23 Jorlon Seat 300
Y Cv 23 Peek Seat 300
ZZ Non-Standard
-7-
MARK 96 SERIES SANITARY PRESSURE REGULATORS 96/1020
Steriflow Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our
website at www.steriflowvalve.com for the latest information on our products.