Solenoid Control Valve: Product Features

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

248D

Solenoid Control Valve

The 248D control valve is a modified solenoid valve that major causes of poor control performance. With a 1249
when supplied with a controlling current will modulate control valve driver to provide the necessary drive signal
the flow of gas. When used with an MKS controller and to operate the solenoid valve, the 248D valve can be used
appropriate flow sensor, the 248D valve modulates gas for either pressure or flow control.
flow while maintaining accurate and precise pressure or
flow. The orifice of the 248D valve is easily adjusted or replaced
without special tools. Adjustment may be required to
The valve seat connected to the armature is lifted away eliminate leakage across the valve resulting from normal
from the adjustable orifice as increasing current is applied operational wear. Replacement is required when wear is
to the solenoid. Two spiral springs center the armature excessive or to change the flow range of the valve.
within the valve body and oppose the magnetic lifting
force. These springs minimize friction and hysteresis,

Product Features

• Easily adjustable and replaceable orifice


• Variety of fittings and elastomer seals
• Wide range of Full Scale flows

Key Benefits
• Easily adjusted or replaced without special tools
• Modulates gas flow while maintaining precise
pressure or flow

Applications for 248D Solenoid Control Valve


Specifications

Full Scale Flow Ranges 10 - 50,000 sccm


• 0.1% of Full Scale (>100 sccm)
Minimum Controllable Flow
• 0.2% of Full Scale (<100 sccm)
Leak Integrity
External (scc/sec/Helium) • <1 x 10-9
Through closed Valve • <1 x 10-5 scc/sec/He (at 1 atmosphere differential)
Wetted Materials 316 S.S., nickel, Viton®, Elgiloy®
Fitting
Standard 1/4'' Swagelok®
Optional 4 VCR® or 4 VCO®
Operating Temperature Range -10°C to +60°C
Compliance 1
CE

For CE compliance an overall metal braided shielded cable, properly grounded at both ends, must be used.
1

Ordering Information

Ordering Code Example: 0248D-01000SV Code Configuration


248D Control Valve 0248D 0248D
Full Scale Range
10 sccm 00010
20 sccm 00020
50 sccm 00050
100 sccm 00100
200 sccm 00020
500 sccm 00050 01000
1000 sccm 01000
2000 sccm 02000
5000 sccm 05000
10000 sccm 10000
20000 sccm 20000
50000 sccm 50000
Fitting
1/4'' Swagelok S (standard)
Swagelok 4 VCR R (optional) S
Swagelok 4 VCO G (optional)
Seal Material
Viton V (standard)
Neoprene N (optional) V
Buna-N B (optional)
Kalrez K (optional)

www.MKSINST.com
MKS products provided subject to the US Export Regulations. Export, re-export, diversion or transfer contrary to US
248D_08/21 law (and local country law) is prohibited. mksinst™ is a trademark and Baratron® is a registered trademark of MKS
©2021 MKS Instruments, Inc. Instruments, Inc. or a subsidiary of MKS Instruments, Inc. All other trademarks cited herein are the property of their
Specifications are subject to change without notice. respective owners.

You might also like