Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    Medical Gas Outlets: Inlet Outlet

    Uploaded by

    Hugo Neri
    This document describes medical gas inlet-outlet components that comply with NFPA99-2015 regulations. The components include primary and secondary check valves, specific connections for different gas types, and modular assemblies designed for wall or headwall mounting. Medical gas latch valves include check valves and rotary assemblies for easy installation. Position pins and trim plates are included to prevent cross-contamination of different gas types. The front assemblies have stainless steel faces, check valves, and position pins to ensure safety. They are available with quick connect or screw connections to accommodate different flow rates and pressures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Medical Gas Outlets: Inlet Outlet

    Uploaded by

    Hugo Neri
    57 views2 pages
    This document describes medical gas inlet-outlet components that comply with NFPA99-2015 regulations. The components include primary and secondary check valves, specific connections for different gas types, and modular assemblies designed for wall or headwall mounting. Medical gas latch valves include check valves and rotary assemblies for easy installation. Position pins and trim plates are included to prevent cross-contamination of different gas types. The front assemblies have stainless steel faces, check valves, and position pins to ensure safety. They are available with quick connect or screw connections to accommodate different flow rates and pressures.

    Original Description:

    REDOFAC

    Original Title

    Model-2019_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes medical gas inlet-outlet components that comply with NFPA99-2015 regulations. The components include primary and secondary check valves, specific connections for different gas types, and modular assemblies designed for wall or headwall mounting. Medical gas latch valves include check valves and rotary assemblies for easy installation. Position pins and trim plates are included to prevent cross-contamination of different gas types. The front assemblies have stainless steel faces, check valves, and position pins to ensure safety. They are available with quick connect or screw connections to accommodate different flow rates and pressures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views2 pages

    Medical Gas Outlets: Inlet Outlet

    Uploaded by

    Hugo Neri
    This document describes medical gas inlet-outlet components that comply with NFPA99-2015 regulations. The components include primary and secondary check valves, specific connections for different gas types, and modular assemblies designed for wall or headwall mounting. Medical gas latch valves include check valves and rotary assemblies for easy installation. Position pins and trim plates are included to prevent cross-contamination of different gas types. The front assemblies have stainless steel faces, check valves, and position pins to ensure safety. They are available with quick connect or screw connections to accommodate different flow rates and pressures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MEDICAL GAS OUTLETS INLET OUTLET

    2 Series

    2015 Edition

    Medical Gas Inlet-Outlet different type of connection.

    specifications
    Primary and secondary check valve include on the medical
    gas inlet and outlet. Specific connection with the plug male
    (quick connect or thread) in correspondence of me-
    dical gas inlet-outlet technology also with the specific
    medical gas type or vacuum.

    Compliance with NFPA99-2015 and update versions


    made.
    All Medical inlet-outlets are factory tested and previously
    cleaned for oxygen use meeting ASTM B819 regulations
    to copper pipe extentions.
    Modular assembly of medical gas inlet-outlet was
    designed to wall mount or medical patient headwalls

    devices:
    MEDICAL GAS LATCH VALVE:
    360°
    Check valve include to medical gas outlets (vacuum
    models do not include the valve), type “K” copper pipe Wall Mount
    10mm diameter and 170mm lenght, meeting ASTM B819
    ready for oxygen use, 360° rotatory medical gas valve
    assembly to easy install.

    POSITION PIN GUIDE type not cross gas security system,


    according with each type of medical gas or vacuum. 360°

    Galvanized steel sheet 18 gauge modular support made Medical patient Headwall mount
    to latch valve.

    GRUPO ARIGMED S. de R.L. de C.V. Tizayuca, Estado de Hidalgo, México


    MADE IN

    certified
    www.arigmed.com Arigmed Medical Gas Equipments [email protected] +52 779 79 69 370
    MEDICAL GAS OUTLETS INLET OUTLET
    2 Series

    TRIM PLATE:
    ABS high resistence plastic injection chromated finish.

    Trim plate to headwall Wall Trim Plate Trim plate to headwall

    PURITAN BENNET type


    Quick Connect

    Arigmed Models type: Arigmed Models type:


    AgaMC70 +M24 screw, AGA MC70
    , Puritan Bennet, Diss CGA-V5
    Chemetron +Ohmeda All Arigmed Serie 2 Models

    AGA MC70 type


    MEDICAL GAS FRONT ASSEMBLY: Quick Connect
    Stainless Steel font assembly face plate made, check valve
    include, POSITION PIN GUIDE type not cross gas security sys-
    tem inlcude, available on the technologies:

    1.Quick Connect: Gas Delivery Extraction


    to 50 psi: to 22”Hg:
    AGA MC70+M24 screw
    1.1 Puritan Bennet type 270 LPM 120 LPM type
    240 LPM 90 LPM Quick Connect
    1.2 Aga MC70 type
    (Only to Mexico)
    1.3 Aga MC70 + M24 Screw 240 LPM 90 LPM
    type (only to mexico)
    1.4 Chemetron+Ohmeda type 250 LPM 130 LPM

    2. Screw Connect: Gas Delivery Extraction


    to 50 psi: to 22”Hg: CHEMETRON+OHMEDA
    2.1 Diss CGA-V5 245.7 LPM 90 LPM Quick Connect

    English GAS I.D. or other language upon customer request.

    100 psi maximum test pressure, 50-55 psi working pressure to DISS CGA-V5
    quick connect models. Screw Connect
    140 psi maximum working pressure to screw model
    DISS CGA-V5.
    ***Installation must be performed by medical gas certified personnel***

    *Complies with 5,1,5 paragraph Chapter V, NFPA99-2015


    In the case the Medical gas outlet-inlet has been supplied partially or modified in the components and systems of factory origin, also
    use non oroginal factory replacements in maintenance routine, we disclaim any responsibility for risk and injuries and damages to
    people and properties, besides NFPA99-2015 regulation will be unfulfilled.

    GRUPO ARIGMED S. de R.L. de C.V. Tizayuca, Estado de Hidalgo, México


    MADE IN

    certified
    www.arigmed.com Arigmed Medical Gas Equipments [email protected] +52 779 79 69 370

    You might also like