Seal Catalogue - Vol 4

Seal Catalogue | Volume 4
HITECHSEALS.COM i
Our Vision
Provide superior value

to our customers.
ii HITECHSEALS.COM
Our Mission
Supply quality products

delivered on time, at a
competitive cost, backed
by a knowledgeable team
of sealing professionals,
so our customers
may grow and prosper.
HITECHSEALS.COM iii
Table of Contents
Introduction x
Seal Analysis Lab xii
Rapid Seal xiv
Table of Contents
Cast Urethane xvi

Rapid Gasket xviii
Rubber Moulding xx
Imperial Seals
O-Rings 1
O-Ring Cord 8
O-Ring Kits 9
Back-Up Rings 12
T-Seals 25
Capped T-Seals 30
Wipers 33
Loaded U-Cups 43
iv HITECHSEALS.COM
Imperial Seals Table of Contents
Table of Contents
Pressure Inverting
Pedestal
67
Z-Seals 69
Homogenous
76
U-Cups
Urethane
79
U-Cups
Engineered
Thermoplastic 83
Seals (ETS)
Buffer Seals 86
Modular
95
Bearings
Wear Rings 98
Dry Slide
104
Bearings
Crown Seals 108
HITECHSEALS.COM v
Table of Contents Imperial Seals
Table of Contents
Piston Rings 112
Fluid Seals 121
Piston Cups 125
Vee Packing 127
Oil Seals 132
Braided Packing 142
Protectors 146
Retaining Rings 156
Rock Bit Balls 158
Spherical Plain
159
Bearings
vi HITECHSEALS.COM
Imperial Seals Table of Contents
Table of Contents
Bonded Washers 161
Vibration Mounts 165
Metric Seals
O-Rings 167
O-Ring Cord 192
O-Ring Kits 193
Back-Up Rings 197
Capped T-Seals 198
Wipers 201
Homogenous
210
U-Cups
HITECHSEALS.COM vii
Table of Contents Metric Seals
Table of Contents
DPP Seal 213
Urethane
215
U-Cups
Buffer Seals 225
Modular
230
Bearings
Wear Rings 231
Wear Strip 236
Dry Slide
238
Bearings
Piston Rings 244
Fluid Seals 248
Vee Packing 253
viii HITECHSEALS.COM
Metric Seals Table of Contents
Table of Contents
Oil Seals 258
VK End Caps 278
V-Seals 280
Retaining Rings 288
Accessories 289
Material
296
Summary
HITECHSEALS.COM ix
Introduction
In 1990, Hi-Tech Seals was founded in Edmonton, Alberta. Since then, our company has expanded to six locations across
Canada and one location in the United States.
We are an industrial seal, gasket, rubber and plastic component distributor and manufacturer with a focus on providing
superior value to our customers. We continually invest in new and innovative products, services, and equipment with the
intention of helping our customers grow and prosper in an ever-changing world economy.
We offer a personal solution to the business world, tailoring our business relationship to reflect the needs of our clients. We
work alongside a variety of industries, while maintaining a high-quality standard in all our products. Our diverse supply
chain allows our customers to be confident we will provide a solution that exceeds their needs.
ISO 9001:2015 Registered QMS

At Hi-Tech Seals, we are committed to our Quality Management System (QMS). Our first branch registered under an ISO
QMS in 1996. Now, our entire company is registered under the ISO 9001:2015 Quality Management System. The four main
goals of our policy include:
• Hi-Tech Seals shall distribute and/or manufacture a quality product that will meet our customers requirements and
expectations.
• Hi-Tech Seals shall strive to continually improve the effectiveness of the Quality Management System.
• Hi-Tech Seals Quality Policy shall be communicated and understood at all levels of the organization.
• Hi-Tech Seals Quality Policy and Quality Objectives will be reviewed for effectiveness and accuracy during the Annual
Management Review.
Introduction
Rapid Prototyping
While working with us, customers gain access to engineering, drafting and
machining support. We have an in-house machining department capable of
creating prototype parts without expensive tooling costs and lengthy lead
times. This means that we can supply parts for testing purposes the week they
are requested, which greatly reduces the time required to design products. See
page xiv-xv for more details.
Custom Seal Kits

Our kit creation program provides customers with an easy to use reordering
system for various types of seal kits. Whether it is for a maintenance or manu-
factured equipment, our seal kits are an excellent system to help our customers
stay organized. Our sales staff will identify the sealing components and create
a kit in our system. The kit can include custom labels with company name and
logos, part numbers, application information, and other useful information.
When placing an order, simply provide us with one part number and receive
the parts in one bag.
Services
We offer a selection of services, including laser engraving, custom labels, PTFE coating, and more. Our engraving machine is
capable of engraving part numbers, application descriptions, company name, and high quality logos onto parts. The focused
laser can etch legible text as small as 1/8" tall along a surface. The engraving machine is capable of etching text onto various
plastic, rubber, and metal materials.
Our custom labels allow customers to place company logos, part numbers, application description, and any other useful
information on part labels. Custom labels can help reduce installation and inventory errors.
We provide a PTFE colour coating service, which allows for quick and easy identification of a seal. Colours can indicate a
difference between similar sizes and materials. We offer coating in fifteen different colours. For more information on our
services, contact a representative.
24/7 Service
We have a sales representative available 24 hours a day, 7 days a week. An after-hours sales representative can be reached by
contacting your local branch.
Seal Analysis Lab
Plastic Machining
Seal&Analysis
Rubber Lab
Our Seal Analysis Lab plays an important role in the engineering services we offer. It
is a step forward in the continual advancement of our quality control program and
unique services. The Lab contains a variety of equipment that allows our engineers,
drafting technicians, and quality control staff to perform various seal related testing.
Detailed Inspection Report

Our lab employs two optical comparator machines, a Micro‒Vu Matrix and Micro‒Vu
Excel. This inspection equipment allows us to quickly and reliably measure compo-
nents to a high level of accuracy. The Matrix is a manually operated system used to
inspect smaller quantities or more intricate parts. The Excel is an automated system,
capable of consecutively measuring multiple components and inspection of parts
approximately two times larger than what the Matrix can measure.
Our staff use both devices to perform detailed inspection of products to determine if
they are within provided specifications. This information is often turned into a report
for our customer’s use.
xii HITECHSEALS.COM
Seal Analysis Lab
Failure Analysis Report
Rubber
Our failure analysis report (FAR) examines and analyzes seals or gaskets and
the environment in which it failed. This allows us to determine the most likely
Seal& Analysis
cause(s) of the failure. Once the cause(s) has been determined, suitable recom-
mendations that will optimize future performance are presented.
Plastic Machining
We perform the analysis with a failed part sample and application information.
If a sample cannot be provided, a picture and a detailed description of the part,
application, and environment is needed.
Lab
Mid‒Infrared FT‒IR Spectrometer
Positive Material Identification

We perform positive material identification (PMI) on elastomeric, plastic, and metal
materials. To identify elastomer and plastic materials we utilize a mid‒infrared FT‒IR
spectrometer. The FT‒IR spectrometer analyzes the molecular structure of a material
to determine the base polymer type.
For sample size requirements or other PMI information, please contact us at

[email protected]
Additional Testing and Analysis

Our Seal Analysis Lab can perform a variety of additional tests and general analysis
using our state‒of‒the‒art equipment including;
• Tensile Strength • Elongation

• Tensile Modulus • Heat‒aging Testing
• Specific Gravity • Hardness Testing
• Face Flatness • Compression Set
Tensile Tester
HITECHSEALS.COM xiii
Rapid Seal Manufacturing
Plastic
Rapid
Rubber & Machining
Seal
Rubber & Plastic Machining

Our in‒house rubber & plastic machining facilities are located in Edmonton, AB., Calgary, AB., Winnipeg, MB., and
Newmarket, ON. Customers can select from one of our pre‒programmed seal profiles or create a custom seal by providing
samples, drawings, or existing metal dimensions. Machined parts can save companies time, money, and the inconvenience
of searching for unique parts.
Rapid Prototyping
While working with us, customers gain access to our experienced engineering, drafting, and machining staff for additional
support. Our in-house machining department is capable of machining prototypes quickly and without expensive tooling.
This allows us to provide prototype parts for testing purposes, typically within the same week.
Capabilities
We have several CNC lathes, multiple NC machines, milling, and live tooling capabilities at our disposal. We are capable of
supplying custom parts with profiles ranging from 1/4" (6mm) ID up to 72" (1829mm) OD.
In-house, we can machine plastic parts with a tolerance of ±0.005 for dimensions up
Dimensions Tolerance
to 5". For dimensions above 5" add an additional ±0.001 for each 1” increment. Our
Up to 5½" ± 0.005"
machined elastomers, including thermoplastic elastomers, are available in 85 Shore
Above 5½" ‒ up to 8" ± 0.010"
A durometer or harder, with select materials available in 75 shore A durometer. Our
Above 8" ‒ up to 10" ± 0.012"
tolerance capabilities vary depending on the parts' dimensions. Refer to table on the
right for more information. Above 10" ‒ up to 14" ± 0.015"
Above 14" ± 0.030"
We work closely with industry leading plastic manufacturers, such as Quadrant Plastics, to create innovative and tailored
solutions. Quadrant offers unique compounds, including:
• Ketron® PEEK • Duratron® PAI • Fluorosint® PTFE • Ertalyte® PET-P • Nylatron® PA • Techtron® PPS
xiv HITECHSEALS.COM
Manufacturing Rapid Seal
Materials
Rubber &Rapid
We stock rods and tubes of plastic and elastomer for production
or direct sales.
Plastics:
PlasticSeal
• Nylon • PTFE • PEEK
• Acetal – Virgin – Virgin
Machining
• Hytrel® – Bronze filled – Carbon filled
• UHMW – Carbon filled – Glass filled
• Ekonol® – Carbon/Graphite
filled
– Glass filled
– Moly/Glass filled
Elastomers:
• Nitrile • Hydrogenated Nitrile
• Aflas® FEPM • Ethylene Propylene
• Chloroprene • Viton™/Fluorocarbon
• Urethane
Rapid Seal Profiles

We have access to over 120+ pre-programmed profiles. Customers can select from these profiles, or create a custom seal by
providing a sample, drawing, or existing metal dimensions. After selecting a pre-programmed seal profile, we will apply the
given dimensions to the profile to produce the part.
Contact us for more information and a complete listing of available materials.
Rod Piston Lip Wipers Guide Back-Up Gaskets

Seals Seals Seals Rings Rings
HITECHSEALS.COM xv
Cast Urethane Manufacturing
& Plastic
Cast
Rubber Machining
Urethane
Our cast urethane division is centrally located in Winnipeg, Manitoba. Cast urethane parts are utilized as a replacement
for previously used plastic, rubber, or metal components. This versatile material can allow for lighter, quieter, and longer
lasting products. Polyurethane’s excellent physical characteristics can save money by increasing wear resistance, providing
less downtime, and by having less product breakage.
Mould Making
Our cast urethane division utilizes an in-house 3D printer to
create scaled models of components. The process allows us to
have full control of our mould development and allows us to
reduce expensive tooling charges.
xvi HITECHSEALS.COM
Manufacturing Cast Urethane
Types of Urethane
Rubber
When creating a customized urethane product there are two main types of
polyurethane, Polyether and Polyester.
Cast
& Plastic
Polyester: Polyether:
Urethane
• Oil & fuel resistance • Better flexibility over polyesters
• Wear resistance • Better hydrolysis resistance
• Dynamic properties
Machining
Durometer
We can maintain the urethane's toughness and resilience while producing a polyurethane as soft as 30 Shore A to as hard
as 87 Shore D.
Shore A 30 35 40 45 50 55 60 65 70 75 80 85 90 95
Shore D 65 70 75 87
Custom Colours
Black, red, yellow, orange, green, blue, white and custom corporate colours.
Logo & Part Numbers

We can tailor components by including a company logo or part number. Moulded
identification marks will help create brand awareness and identify proprietary parts.
HITECHSEALS.COM xvii
Rapid Gasket Manufacturing
LaserQC®
Machining
Our Gasket Division employs a Virtek LaserQC® 1200

machine. The LaserQC® assists in reverse engineering, quality
inspection and control, and statistical process control. It
Gasket
captures over 500 data points per second, while maintaining

a tolerance within ± 0.05mm (0.002"). Our drafting depart-
& Plastic
ment makes adjustments to the scanned data to optimize the

tolerance levels. The file can then be exported directly to our
RubberRapid
flashcutters for rapid gasket production.
Materials:
Composite Non‒Asbestos Rubber and Plastic
BA-U Nitrile Chloroprene
BA-50 Hydrogenated Nitrile Silicone
BA-CF White Nitrile Silicone Sponge w/PSA Backing
NBR Sponge UHMW-PE
Thickness: 1/64", 1/32", 1/16", 1/8" Cork/Nitrile Neo-Nylon
Sheet Size: 5' × 5', 5' × 10', 5' × 15' Viton™/Fluorocarbon Red Rubber
Expanded PTFE Vegetable Fibre/Plant Fibre
Composite Flexible Graphite PTFE Gum Rubber
EPDM
Grafilit® SF
Grafilit® SL Thickness: 1/64”, 1/32”, 1/16”, 1/8”, 3/16”, 1/4”
Grafilit® SP Sheet Size: 4’ × 25’, 4’ × 50’, 4’ × 100’
Thickness: 1/64", 1/32", 1/16", 1/8"

Sheet Size: 3' × 3'
xviii HITECHSEALS.COM
Manufacturing Rapid Gasket
RubberRapid
& Plastic
Gasket
Machining
Equipment
Flashcutter Hand Cut
Our two Atom Flashcutters utilize CAD renderings to quickly For cost effective small runs, our Gasket Division pro-
produce gaskets from rubber, plastic, and composite materials. duces hand cut gaskets. Hand cut gaskets are excellent for
Each flashcutter’s surface area can accommodate material up prototype applications or for one of a kind parts.
to 60" × 120". We are capable of cutting rubber materials up to
1" thick and plastic and composite materials up to a 1/2" thick. Die Cut
The flashcutters use a rapid vertical reciprocating motion to For cost effective small runs, we produce hand cut gas-
cut the gaskets. The cutting motion produces a cleaner finished kets. Dimensional capabilities include:
part, avoiding compression marks found on die‒cut gaskets. • Round Gaskets - up to 36”
The flashcutters' vacuum surfaces hold sheet material in place • Oblong Rubber Gaskets - up to 48” x virtually
preventing the movement of parts during production. This endless
enables the flashcutter to maintain exceptional tolerances. • Oblong Non-asbestos Gaskets - up to 60” x 180”
HITECHSEALS.COM xix
Rubber Moulding Manufacturing
& Plastic
Rubber Machining
Moulding
Who Is Can-Tech?
Rubber
We have a partnership with a Northern Ireland based rubber-moulding specialist; Can-Tech Elastomers Ltd. Can-Tech
Elastomers has over 30 years experience in developing high performance rubber components for the oil and gas industry. All
of Can-Tech’s products are moulded in-house; this allows for full traceability of parts and close monitoring of the moulding
process.
Can-Tech’s key product lines include:
• Specialty Vee Packing • Custom Sealing Designs

• O-Rings • PCE Seals (Inner & Outer Seals)
• T-Seals • Swellable Products
• Bonded Seals
Materials
Can-Tech Elastomers has worked closely with Europe’s leading compounding specialist to develop the best compounds for
severe service environments. Some of these compounds include hybrid and impregnated materials that augment extrusion
resistance or swellable materials that help fill voids or cavities.
Can-Tech’s material expertise extends to:
• Natural Rubber
• Ethylene-Propylene (EPDM)
• Neoprene
• Nitrile (NBR)
• Hydrogenated Nitrile(HNBR)
• Aflas® (FEPM)
• Viton™/Fluorocarbon (FKM)
• Perfluoroelastomer (FFKM)
xx HITECHSEALS.COM
Rubber Moulding
Rubber
Rubber
& Plastic
Moulding
Machining
Rubber-to-Metal Bonding
Extensive experience with in-mould vulcanized rubber-to-metal bonding has provided Can-Tech the knowledge and ability
to create quality parts and components that out perform customer’s expectations. In-mould vulcanized rubber-to-metal
bonds differ from other bonding techniques as a unique chemical reaction occurs between the materials. The chemical
reaction creates a stronger, longer lasting bond that can better withstand the components' environment. Common rubber-
to-metal bonded parts include Bonded Seals, Check Darts, Packer Elements, Ball Seats, Couplings, and Inflatable Elements.
Fabric Reinforcement
For engineered components requiring improved extrusion resistance, burst resistance, or directional mechanical stiffening,
Can-Tech has the ability to reinforce materials with fibres and fabrics. If an application requires advanced performance, Can-
Tech can incorporate Kevlar® or carbon fibres into the material. Common fabric reinforced products include Vee Packing,
Packer Elements, Inflatable Clamps, Pump Packing, and Diaphragms.
Custom Moulding
Custom moulding is a key service provided by Can-Tech which possesses a wealth of experience of creating custom moulded
components for a wide variety of industrial applications. Custom moulded components are developed in close cooperation
with our customers. Maximum moulding capability measures:
5’ 10” x 7’ 2” x 1’3”
Research and Development

Can-Tech’s engineering team provides assistance to our customers with the research and development of new products,
materials and projects. This service involves prototype testing, which is essential for the development process. All research
and development is carried out in a confidential and structured manner. Can-Tech’s engineering can perform F.E.A of these
elastomeric products during developement which helps achieve the optimum solution for our customers.
HITECHSEALS.COM xxi
Imperial Seals O-Rings
Materials Temp. Range
Nitrile -40°C to 120°C
Low Temp. Nitrile -54°C to 116°C
Hydrogenated Nitrile -40°C to 160°C
Viton™/Fluorocarbon -26°C to 204°C
O-Rings
PTFE -268°C to 232°C
Aflas® FEPM -9°C to 232°C
Neoprene -40°C to 121°C

EPDM -54°C to 150°C
Perfluoroelastomer -15°C to 310°C
Silicone -65°C to 232°C

Fluorosilicone -56°C to 204°C
Material information is not intended for design purposes. Please

consult us when designing applications.
O-Ring Square Cut Ring Quad Ring

Product Description
The O-ring is the most widely used seal in history due to its simplicity, low cost, ease of installation, and small space require-
ments. O-rings are designed for both static and dynamic applications. A properly designed O-ring groove allows the O-ring to be
squeezed diametrically out-of-round even before the application of pressure. The O-ring seals by distortion of its resilient elastic
compound to fill the leakage path. Quad rings have the same diameters and cross sections as an O-ring, only the profile is different.
Square cut rings have the same ID as an O-ring, but have different cross sections. See page 4 for actual square ring cross sections.
Part Numbers:
___ ___ ___ - ___ ___ ___
Dash Number
Prefix
O-Rings O-Rings O-Rings Square Cut Rings
N70 - Nitrile FK7 - Fluorocarbon KAL - Kalrez® TS7 - Nitrile
N90 - Nitrile FK9 - Fluorocarbon S70 - Silicone TS9 - Nitrile
LTN - Low Temp. Nitrile T - Teflon™ FS7 - Fluorosilicone
HS7 - Hydrogenated Nitrile A80 - Aflas® FEPM U90 - Urethane Quad Rings
HS8 - Hydrogenated Nitrile NEO - Neoprene QN7 - Nitrile
HS9 - Hydrogenated Nitrile E70 - EPDM QN9 - Nitrile
V75 - Viton™ E80 - EPDM QV7 - Viton™
V90 - Viton™ PF7 - Perfluoroelastomer QE7 - EPDM
LTV - Low Temp. Viton™ PF9 - Perfluoroelastomer
Example: HS8 224 - Hydrogenated Nitrile, 80 Durometer, 1 - 3/4” Nom. I.D., 1/8” Nom. C/S
HITECHSEALS.COM
www.hitechseals.com 1 1
O-Rings Imperial Seals
Static Radial Applications

O-Rings
R
E/2
D Information is based on ISO 3601
* Pneumatic applications typically do not use a Back-up ring.
D E C R
Groove Width +0.010/-0.000
Squeeze Diametrical No One Two
O-Ring Groove Clearance Back-Up Back-Up Back-Up Groove
C/S Depth Inches % Max. Ring Ring Rings Radius
0.070 0.049 - 0.057 0.010 - 0.025 14 - 35 0.004 0.110 0.165 0.220 0.008 - 0.016
0.103 0.075 - 0.087 0.013 - 0.031 13 - 30 0.005 0.150 0.205 0.260 0.008 - 0.016
0.139 0.101 - 0.117 0.018 - 0.042 13 - 30 0.006 0.197 0.252 0.307 0.016 - 0.031
0.210 0.156 - 0.180 0.025 - 0.059 12 - 28 0.006 0.283 0.354 0.429 0.016 - 0.031
0.275 0.212 - 0.242 0.028 - 0.069 10 - 25 0.007 0.374 0.484 0.594 0.031 - 0.047
Static Axial (Face) Applications

C
Information is based on ISO 3601
D C R
O-Ring Groove Depth Groove Width +0.008/-0.000 Groove
C/S +0.004/-0.000 Squeeze % Hydraulic Pneumatic Radius
0.070 0.051 21 - 36 0.126 0.114 0.008 - 0.016
0.103 0.079 19 - 30 0.157 0.142 0.008 - 0.016
0.139 0.106 17 - 26 0.209 0.189 0.016 - 0.031
0.210 0.165 15 - 23 0.299 0.276 0.016 - 0.031
0.275 0.224 13 - 20 0.354 0.335 0.031 - 0.047
2 HITECHSEALS.COM
Reciprocating Applications
C C E/2
D
D
R
O-Rings
R
E/2
Information is based on ISO 3601

* Pneumatic applications typically do not use a Back-up ring.
D E
C R
Squeeze Groove Width +0.010/-0.000
Groove depth Hydraulic Pneumatic Diametrical No One Two
O-Ring Clearance Back- Up Back- Up Back- Up Groove
C/S Hydraulic Pneumatic Inches % Inches % Max. Ring Ring Rings Radius
0.009 0.007 0.008
0.070 0.054 - 0.058 0.056 - 0.060 13 - 27 10 - 24 0.004 0.110 0.165 0.220
- 0.019 - 0.017 - 0.016
0.012 0.008 0.008
0.103 0.081 - 0.088 0.083 - 0.092 12 - 24 8 - 22 0.005 0.150 0.205 0.260
- 0.025 - 0.023 - 0.016
0.015 0.010 0.016
0.139 0.112 - 0.120 0.115 - 0.125 11 - 22 7 - 20 0.006 0.197 0.252 0.307
- 0.031 - 0.028 - 0.031
0.023 0.015 0.016
0.210 0.173 - 0.182 0.177 - 0.190 11 - 20 7 - 18 0.006 0.283 0.354 0.429
- 0.042 - 0.038 - 0.031
0.025 0.017 0.031
0.275 0.229 - 0.244 0.234 - 0.253 9 - 19 6 - 17 0.007 0.374 0.484 0.594
- 0.052 - 0.047 - 0.047
Limits for Extrusion 690.0

552.0
414.0
10000
8000
6000
There are different methods to counter O-ring extrusion. One 276.0 4000
of these methods is to simply increase the durometer rating 207.0 3000

138.0 2000
of the O-ring. However, as the durometer is increased, the
Fluid Pressure (Bar)
Fluid Pressure (psi)
O-ring can become less malleable. Another option would be to EXTRUSION

69.0 1000
use anti-extrusion devices. These are thin rings made of hard 55.2 800
plastic materials such as PTFE, nylon, and PEEK. Once in place 41.4
NO
600
these rings will provide essentially zero clearance. 27.6 EXTRUSION 400
20.7 300
13.8 200
Reduce the clearance shown by 60% when using silicone or fluoro-silicone

6.9 100
elastomers. mm 0 .3 .5 .8 1.0
In. 0 .010 .020 .030 .040
DUROMETER –70 –80 –90
(HARDNESS SHORE A)
Total Diametrical Clearance
HITECHSEALS.COM 3
I.D.
Square Cut Rings Actual C/S C/S
000 Series 0.066
100 Series 0.099
200 Series 0.134
300 Series 0.203
400 Series 0.266
O-Rings
Dash Nominal Actual Sizing Dash Nominal Actual Sizing

# I.D. O.D. C/S I.D. C/S # I.D. O.D. C/S I.D. C/S
001 1/32 3/32 1/32 0.029 ± 0.004 0.040 ± 0.003 044 3 - 3/4 3 - 7/8 1/16 3.739 ± 0.027 0.070 ± 0.003
002 3/64 9/64 3/64 0.042 ± 0.004 0.050 ± 0.003 045 4 4 - 1/8 1/16 3.989 ± 0.027 0.070 ± 0.003
003 1/16 3/16 1/16 0.056 ± 0.004 0.060 ± 0.003 046 4 - 1/4 4 - 3/8 1/16 4.239 ± 0.030 0.070 ± 0.003
004 5/64 13/64 1/16 0.070 ± 0.005 0.070 ± 0.003 047 4 - 1/2 4 - 5/8 1/16 4.489 ± 0.030 0.070 ± 0.003
005 3/32 7/32 1/16 0.101 ± 0.005 0.070 ± 0.003 048 4 - 3/4 4 - 7/8 1/16 4.739 ± 0.030 0.070 ± 0.003
006 1/8 1/4 1/16 0.114 ± 0.005 0.070 ± 0.003 049 5 5 - 1/8 1/16 4.989 ± 0.037 0.070 ± 0.003
007 5/32 9/32 1/16 0.145 ± 0.005 0.070 ± 0.003 050 5 - 1/4 5 - 3/8 1/16 5.239 ± 0.037 0.070 ± 0.003
008 3/16 5/16 1/16 0.176 ± 0.005 0.070 ± 0.003
009 7/32 11/32 1/16 0.208 ± 0.005 0.070 ± 0.003 102 1/16 1/4 3/32 0.049 ± 0.005 0.103 ± 0.003
010 1/4 3/8 1/16 0.239 ± 0.005 0.070 ± 0.003 103 3/32 9/32 3/32 0.081 ± 0.005 0.103 ± 0.003
011 5/16 7/16 1/16 0.301 ± 0.005 0.070 ± 0.003 104 1/8 5/16 3/32 0.112 ± 0.005 0.103 ± 0.003
012 3/8 1/2 1/16 0.364 ± 0.005 0.070 ± 0.003 105 5/32 11/32 3/32 0.143 ± 0.005 0.103 ± 0.003
013 7/16 9/16 1/16 0.426 ± 0.005 0.070 ± 0.003 106 3/16 3/8 3/32 0.174 ± 0.005 0.103 ± 0.003
014 1/2 5/8 1/16 0.489 ± 0.005 0.070 ± 0.003 107 7/32 13/32 3/32 0.206 ± 0.005 0.103 ± 0.003
015 9/16 11/16 1/16 0.551 ± 0.007 0.070 ± 0.003 108 1/4 7/16 3/32 0.237 ± 0.005 0.103 ± 0.003
016 5/8 3/4 1/16 0.614 ± 0.009 0.070 ± 0.003 109 5/16 1/2 3/32 0.299 ± 0.005 0.103 ± 0.003
017 11/16 13/16 1/16 0.676 ± 0.009 0.070 ± 0.003 110 3/8 9/16 3/32 0.362 ± 0.005 0.103 ± 0.003
018 3/4 7/8 1/16 0.739 ± 0.009 0.070 ± 0.003 111 7/16 5/8 3/32 0.424 ± 0.005 0.103 ± 0.003
019 13/16 15/16 1/16 0.801 ± 0.009 0.070 ± 0.003 112 1/2 11/16 3/32 0.487 ± 0.005 0.103 ± 0.003
020 7/8 1 1/16 0.864 ± 0.009 0.070 ± 0.003 113 9/16 3/4 3/32 0.549 ± 0.007 0.103 ± 0.003
021 15/16 1 - 1/16 1/16 0.926 ± 0.009 0.070 ± 0.003 114 5/8 13/16 3/32 0.612 ± 0.009 0.103 ± 0.003
022 1 1 - 1/8 1/16 0.989 ± 0.010 0.070 ± 0.003 115 11/16 7/8 3/32 0.674 ± 0.009 0.103 ± 0.003
023 1 - 1/16 1 - 3/16 1/16 1.051 ± 0.010 0.070 ± 0.003 116 3/4 15/16 3/32 0.737 ± 0.009 0.103 ± 0.003
024 1 - 1/8 1 - 1/4 1/16 1.114 ± 0.010 0.070 ± 0.003 117 13/16 1 3/32 0.799 ± 0.010 0.103 ± 0.003
025 1 - 3/16 1 - 5/16 1/16 1.176 ± 0.011 0.070 ± 0.003 118 7/8 1 - 1/16 3/32 0.862 ± 0.010 0.103 ± 0.003
026 1 - 1/4 1 - 3/8 1/16 1.239 ± 0.011 0.070 ± 0.003 119 15/16 1 - 1/8 3/32 0.924 ± 0.010 0.103 ± 0.003
027 1 - 5/16 1 - 7/16 1/16 1.301 ± 0.011 0.070 ± 0.003 120 1 1 - 3/16 3/32 0.987 ± 0.010 0.103 ± 0.003
028 1 - 3/8 1 - 1/2 1/16 1.364 ± 0.013 0.070 ± 0.003 121 1 - 1/16 1 - 1/4 3/32 1.049 ± 0.010 0.103 ± 0.003
029 1 - 1/2 1 - 5/8 1/16 1.489 ± 0.013 0.070 ± 0.003 122 1 - 1/8 1 - 5/16 3/32 1.112 ± 0.010 0.103 ± 0.003
030 1 - 5/8 1 - 3/4 1/16 1.614 ± 0.013 0.070 ± 0.003 123 1 - 3/16 1 - 3/8 3/32 1.174 ± 0.012 0.103 ± 0.003
031 1 - 3/4 1 - 7/8 1/16 1.739 ± 0.015 0.070 ± 0.003 124 1 - 1/4 1 - 7/16 3/32 1.237 ± 0.012 0.103 ± 0.003
032 1 - 7/8 2 1/16 1.864 ± 0.015 0.070 ± 0.003 125 1 - 5/16 1 - 1/2 3/32 1.299 ± 0.012 0.103 ± 0.003
033 2 2 - 1/8 1/16 1.989 ± 0.018 0.070 ± 0.003 126 1 - 3/8 1 - 9/16 3/32 1.362 ± 0.012 0.103 ± 0.003
034 2 - 1/8 2 - 1/4 1/16 2.114 ± 0.018 0.070 ± 0.003 127 1 - 7/16 1 - 5/8 3/32 1.424 ± 0.012 0.103 ± 0.003
035 2 - 1/4 2 - 3/8 1/16 2.239 ± 0.018 0.070 ± 0.003 128 1 - 1/2 1 - 11/16 3/32 1.487 ± 0.012 0.103 ± 0.003
036 2 - 3/8 2 - 1/2 1/16 2.364 ± 0.018 0.070 ± 0.003 129 1 - 9/16 1 - 3/4 3/32 1.549 ± 0.015 0.103 ± 0.003
037 2 - 1/2 2 - 5/8 1/16 2.489 ± 0.018 0.070 ± 0.003 130 1 - 5/8 1 - 13/16 3/32 1.612 ± 0.015 0.103 ± 0.003
038 2 - 5/8 2 - 3/4 1/16 2.614 ± 0.020 0.070 ± 0.003 131 1 - 11/16 1 - 7/8 3/32 1.674 ± 0.015 0.103 ± 0.003
039 2 - 3/4 2 - 7/8 1/16 2.739 ± 0.020 0.070 ± 0.003 132 1 - 3/4 1 - 15/16 3/32 1.737 ± 0.015 0.103 ± 0.003
040 2 - 7/8 3 1/16 2.864 ± 0.020 0.070 ± 0.003 133 1 - 13/16 2 3/32 1.799 ± 0.015 0.103 ± 0.003
041 3 3 - 1/8 1/16 2.989 ± 0.024 0.070 ± 0.003 134 1 - 7/8 2 - 1/16 3/32 1.862 ± 0.015 0.103 ± 0.003
042 3 - 1/4 3 - 3/8 1/16 3.239 ± 0.024 0.070 ± 0.003 135 1 - 15/16 2 - 1/8 3/32 1.925 ± 0.017 0.103 ± 0.003
043 3 - 1/2 3 - 5/8 1/16 3.489 ± 0.024 0.070 ± 0.003 136 2 2 - 3/16 3/32 1.987 ± 0.017 0.103 ± 0.003
4 HITECHSEALS.COM
137 2 - 1/16 2 - 1/4 3/32 2.050 ± 0.017 0.103 ± 0.003 208 5/8 7/8 1/8 0.609 ± 0.009 0.139 ± 0.004
138 2 - 1/8 2 - 5/16 3/32 2.112 ± 0.017 0.103 ± 0.003 209 11/16 15/16 1/8 0.671 ± 0.009 0.139 ± 0.004
139 2 - 3/16 2 - 3/8 3/32 2.175 ± 0.017 0.103 ± 0.003 210 3/4 1 1/8 0.734 ± 0.010 0.139 ± 0.004
140 2 - 1/4 2 - 7/16 3/32 2.237 ± 0.017 0.103 ± 0.003 211 13/16 1 - 1/16 1/8 0.796 ± 0.010 0.139 ± 0.004
141 2 - 5/16 2 - 1/2 3/32 2.300 ± 0.020 0.103 ± 0.003 212 7/8 1 - 1/8 1/8 0.859 ± 0.010 0.139 ± 0.004
O-Rings
142 2 - 3/8 2 - 9/16 3/32 2.362 ± 0.020 0.103 ± 0.003 213 15/16 1 - 3/16 1/8 0.921 ± 0.010 0.139 ± 0.004
143 2 - 7/16 2 - 5/8 3/32 2.425 ± 0.020 0.103 ± 0.003 214 1 1 - 1/4 1/8 0.984 ± 0.010 0.139 ± 0.004
144 2 - 1/2 2 - 11/16 3/32 2.487 ± 0.020 0.103 ± 0.003 215 1 - 1/16 1 - 5/16 1/8 1.046 ± 0.010 0.139 ± 0.004
145 2 - 9/16 2 - 3/4 3/32 2.550 ± 0.020 0.103 ± 0.003 216 1 - 1/8 1 - 3/8 1/8 1.109 ± 0.012 0.139 ± 0.004
146 2 - 5/8 2 - 13/16 3/32 2.612 ± 0.020 0.103 ± 0.003 217 1 - 3/16 1 - 7/16 1/8 1.171 ± 0.012 0.139 ± 0.004
147 2 - 11/16 2 - 7/8 3/32 2.675 ± 0.022 0.103 ± 0.003 218 1 - 1/4 1 - 1/2 1/8 1.234 ± 0.012 0.139 ± 0.004
148 2 - 3/4 2 - 15/16 3/32 2.737 ± 0.022 0.103 ± 0.003 219 1 - 5/16 1 - 9/16 1/8 1.296 ± 0.012 0.139 ± 0.004
149 2 - 13/16 3 3/32 2.800 ± 0.022 0.103 ± 0.003 220 1 - 3/8 1 - 5/8 1/8 1.359 ± 0.012 0.139 ± 0.004
150 2 - 7/8 3 - 1/16 3/32 2.862 ± 0.022 0.103 ± 0.003 221 1 - 7/16 1 - 11/16 1/8 1.421 ± 0.012 0.139 ± 0.004
151 3 3 - 3/16 3/32 2.987 ± 0.024 0.103 ± 0.003 222 1 - 1/2 1 - 3/4 1/8 1.484 ± 0.015 0.139 ± 0.004
152 3 - 1/4 3 - 7/16 3/32 3.237 ± 0.024 0.103 ± 0.003 223 1 - 5/8 1 - 7/8 1/8 1.609 ± 0.015 0.139 ± 0.004
153 3 - 1/2 3 - 11/16 3/32 3.487 ± 0.024 0.103 ± 0.003 224 1 - 3/4 2 1/8 1.734 ± 0.015 0.139 ± 0.004
154 3 - 3/4 2 - 15/16 3/32 3.737 ± 0.028 0.103 ± 0.003 225 1 - 7/8 2 - 1/8 1/8 1.859 ± 0.018 0.139 ± 0.004
155 4 4 - 3/16 3/32 3.987 ± 0.028 0.103 ± 0.003 226 2 2 - 1/4 1/8 1.984 ± 0.018 0.139 ± 0.004
156 4 - 1/4 4 - 7/16 3/32 4.237 ± 0.030 0.103 ± 0.003 227 2 - 1/8 2 - 3/8 1/8 2.109 ± 0.018 0.139 ± 0.004
157 4 - 1/2 4 -11/16 3/32 4.487 ± 0.030 0.103 ± 0.003 228 2 - 1/4 2 - 1/2 1/8 2.234 ± 0.020 0.139 ± 0.004
158 4 - 3/4 4 - 15/16 3/32 4.737 ± 0.030 0.103 ± 0.003 229 2 - 3/8 2 - 5/8 1/8 2.359 ± 0.020 0.139 ± 0.004
159 5 5 - 3/16 3/32 4.987 ± 0.035 0.103 ± 0.003 230 2 - 1/2 2 - 3/4 1/8 2.484 ± 0.020 0.139 ± 0.004
160 5 - 1/4 5 - 7/16 3/32 5.237 ± 0.035 0.103 ± 0.003 231 2 - 5/8 2 - 7/8 1/8 2.609 ± 0.020 0.139 ± 0.004
161 5 - 1/2 5 - 11/16 3/32 5.487 ± 0.035 0.103 ± 0.003 232 2 - 3/4 3 1/8 2.734 ± 0.024 0.139 ± 0.004
162 5 - 3/4 5 - 15/16 3/32 5.737 ± 0.035 0.103 ± 0.003 233 2 - 7/8 3 - 1/8 1/8 2.859 ± 0.024 0.139 ± 0.004
163 6 6 - 3/16 3/32 5.987 ± 0.035 0.103 ± 0.003 234 3 3 - 1/4 1/8 2.984 ± 0.024 0.139 ± 0.004
164 6 - 1/4 6 - 7/16 3/32 6.237 ± 0.040 0.103 ± 0.003 235 3 - 1/8 3 - 3/8 1/8 3.109 ± 0.024 0.139 ± 0.004
165 6 - 1/2 6 - 11/16 3/32 6.487 ± 0.040 0.103 ± 0.003 236 3 - 1/4 3 - 1/2 1/8 3.234 ± 0.024 0.139 ± 0.004
166 6 - 3/4 6 - 15/16 3/32 6.737 ± 0.040 0.103 ± 0.003 237 3 - 3/8 3 - 5/8 1/8 3.359 ± 0.024 0.139 ± 0.004
167 7 7 - 3/16 3/32 6.987 ± 0.040 0.103 ± 0.003 238 3 - 1/2 3 - 3/4 1/8 3.484 ± 0.024 0.139 ± 0.004
168 7 - 1/4 7 - 7/16 3/32 7.237 ± 0.045 0.103 ± 0.003 239 3 - 5/8 3 - 7/8 1/8 3.609 ± 0.028 0.139 ± 0.004
169 7 - 1/2 7 - 11/16 3/32 7.487 ± 0.045 0.103 ± 0.003 240 3 - 3/4 4 1/8 3.734 ± 0.028 0.139 ± 0.004
170 7 - 3/4 7 - 15/16 3/32 7.737 ± 0.045 0.103 ± 0.003 241 3 - 7/8 4 - 1/8 1/8 3.859 ± 0.028 0.139 ± 0.004
171 8 8 - 3/16 3/32 7.987 ± 0.045 0.103 ± 0.003 242 4 4 - 1/4 1/8 3.984 ± 0.028 0.139 ± 0.004
172 8 - 1/4 8 - 7/16 3/32 8.237 ± 0.050 0.103 ± 0.003 243 4 - 1/8 4 - 3/8 1/8 4.109 ± 0.028 0.139 ± 0.004
173 8 - 1/2 8 - 11/16 3/32 8.487 ± 0.050 0.103 ± 0.003 244 4 - 1/4 4 - 1/2 1/8 4.234 ± 0.030 0.139 ± 0.004
174 8 - 3/4 8 - 15/16 3/32 8.737 ± 0.050 0.103 ± 0.003 245 4 - 3/8 4 - 5/8 1/8 4.359 ± 0.030 0.139 ± 0.004
175 9 9 - 3/16 3/32 8.987 ± 0.050 0.103 ± 0.003 246 4 - 1/2 4 - 3/4 1/8 4.484 ± 0.030 0.139 ± 0.004
176 9 - 1/4 9 - 7/16 3/32 9.237 ± 0.055 0.103 ± 0.003 247 4 - 5/8 4 - 7/8 1/8 4.609 ± 0.030 0.139 ± 0.004
177 9 - 1/2 9 - 11/16 3/32 9.487 ± 0.055 0.103 ± 0.003 248 4 - 3/4 5 1/8 4.734 ± 0.030 0.139 ± 0.004
178 9 - 3/4 9 - 15/16 3/32 9.737 ± 0.055 0.103 ± 0.003 249 4 - 7/8 5 - 1/8 1/8 4.859 ± 0.035 0.139 ± 0.004
250 5 5 - 1/4 1/8 4.984 ± 0.035 0.139 ± 0.004
201 3/16 7/16 1/8 0.171 ± 0.005 0.139 ± 0.004 251 5 - 1/8 5 - 3/8 1/8 5.109 ± 0.035 0.139 ± 0.004
202 1/4 1/2 1/8 0.234 ± 0.005 0.139 ± 0.004 252 5 - 1/4 5 - 1/2 1/8 5.234 ± 0.035 0.139 ± 0.004
203 5/16 9/16 1/8 0.296 ± 0.005 0.139 ± 0.004 253 5 - 3/8 5 - 5/8 1/8 5.359 ± 0.035 0.139 ± 0.004
204 3/8 5/8 1/8 0.359 ± 0.005 0.139 ± 0.004 254 5 - 1/2 5 - 3/4 1/8 5.484 ± 0.035 0.139 ± 0.004
205 7/16 11/16 1/8 0.421 ± 0.005 0.139 ± 0.004 255 5 - 5/8 5 - 7/8 1/8 5.609 ± 0.035 0.139 ± 0.004
206 1/2 3/4 1/8 0.484 ± 0.005 0.139 ± 0.004 256 5 - 3/4 6 1/8 5.734 ± 0.035 0.139 ± 0.004
207 9/16 13/16 1/8 0.546 ± 0.007 0.139 ± 0.004 257 5 - 7/8 6 - 1/8 1/8 5.859 ± 0.035 0.139 ± 0.004
HITECHSEALS.COM 5

258 6 6 - 1/4 1/8 5.984 ± 0.035 0.139 ± 0.004 331 2 - 1/4 2 - 5/8 3/16 2.225 ± 0.018 0.210 ± 0.005
259 6 - 1/4 6 - 1/2 1/8 6.234 ± 0.040 0.139 ± 0.004 332 2 - 3/8 2 - 3/4 3/16 2.350 ± 0.018 0.210 ± 0.005
260 6 - 1/2 6 - 3/4 1/8 6.484 ± 0.040 0.139 ± 0.004 333 2 - 1/2 2 - 7/8 3/16 2.475 ± 0.020 0.210 ± 0.005
261 6 - 3/4 7 1/8 6.734 ± 0.040 0.139 ± 0.004 334 2 - 5/8 3 3/16 2.600 ± 0.020 0.210 ± 0.005
262 7 7 - 1/4 1/8 6.984 ± 0.040 0.139 ± 0.004 335 2 - 3/4 3 - 1/8 3/16 2.725 ± 0.020 0.210 ± 0.005
O-Rings
263 7 - 1/4 7 - 1/2 1/8 7.234 ± 0.045 0.139 ± 0.004 336 2 - 7/8 3 - 1/4 3/16 2.850 ± 0.020 0.210 ± 0.005
264 7 - 1/2 7 - 3/4 1/8 7.484 ± 0.045 0.139 ± 0.004 337 3 3 - 3/8 3/16 2.975 ± 0.024 0.210 ± 0.005
265 7 - 3/4 8 1/8 7.734 ± 0.045 0.139 ± 0.004 338 3 - 1/8 3 - 1/2 3/16 3.100 ± 0.024 0.210 ± 0.005
266 8 8 - 1/4 1/8 7.984 ± 0.045 0.139 ± 0.004 339 3 - 1/4 3 - 5/8 3/16 3.225 ± 0.024 0.210 ± 0.005
267 8 - 1/4 8 - 1/2 1/8 8.234 ± 0.050 0.139 ± 0.004 340 3 - 3/8 3 - 3/4 3/16 3.350 ± 0.024 0.210 ± 0.005
268 8 - 1/2 8 - 3/4 1/8 8.484 ± 0.050 0.139 ± 0.004 341 3 - 1/2 3 - 7/8 3/16 3.475 ± 0.024 0.210 ± 0.005
269 8 - 3/4 9 1/8 8.734 ± 0.050 0.139 ± 0.004 342 3 - 5/8 4 3/16 3.600 ± 0.028 0.210 ± 0.005
270 9 9 - 1/4 1/8 8.984 ± 0.050 0.139 ± 0.004 343 3 - 3/4 4 - 1/8 3/16 3.725 ± 0.028 0.210 ± 0.005
271 9 - 1/4 9 - 1/2 1/8 9.234 ± 0.055 0.139 ± 0.004 344 3 - 7/8 4 - 1/4 3/16 3.850 ± 0.028 0.210 ± 0.005
272 9 - 1/2 9 - 3/4 1/8 9.484 ± 0.055 0.139 ± 0.004 345 4 4 - 3/8 3/16 3.975 ± 0.028 0.210 ± 0.005
273 9 - 3/4 10 1/8 9.734 ± 0.055 0.139 ± 0.004 346 4 - 1/8 4 - 1/2 3/16 4.100 ± 0.028 0.210 ± 0.005
274 10 10 - 1/4 1/8 9.984 ± 0.055 0.139 ± 0.004 347 4 - 1/4 4 - 5/8 3/16 4.225 ± 0.030 0.210 ± 0.005
275 10 - 1/2 10 - 3/4 1/8 10.484 ± 0.055 0.139 ± 0.004 348 4 - 3/8 4 - 3/4 3/16 4.350 ± 0.030 0.210 ± 0.005
276 11 11 - 1/4 1/8 10.984 ± 0.065 0.139 ± 0.004 349 4 - 1/2 4 - 7/8 3/16 4.475 ± 0.030 0.210 ± 0.005
277 11 - 1/2 11 - 3/4 1/8 11.484 ± 0.065 0.139 ± 0.004 350 4 - 5/8 5 3/16 4.600 ± 0.030 0.210 ± 0.005
278 12 12 - 1/4 1/8 11.984 ± 0.065 0.139 ± 0.004 351 4 - 3/4 5 - 1/8 3/16 4.725 ± 0.030 0.210 ± 0.005
279 13 13 - 1/4 1/8 12.984 ± 0.065 0.139 ± 0.004 352 4 - 7/8 5 - 1/4 3/16 4.850 ± 0.030 0.210 ± 0.005
280 14 14 - 1/4 1/8 13.984 ± 0.065 0.139 ± 0.004 353 5 5 - 3/8 3/16 4.975 ± 0.037 0.210 ± 0.005
281 15 15 - 1/4 1/8 14.984 ± 0.065 0.139 ± 0.004 354 5 - 1/8 5 - 1/2 3/16 5.100 ± 0.037 0.210 ± 0.005
282 16 16 - 1/4 1/8 15.955 ± 0.075 0.139 ± 0.004 355 5 - 1/4 5 - 5/8 3/16 5.225 ± 0.037 0.210 ± 0.005
283 17 17 - 1/4 1/8 16.956 ± 0.080 0.139 ± 0.004 356 5 - 3/8 5 - 3/4 3/16 5.350 ± 0.037 0.210 ± 0.005
284 18 18 - 1/4 1/8 17.955 ± 0.085 0.139 ± 0.004 357 5 - 1/2 5 - 7/8 3/16 5.475 ± 0.037 0.210 ± 0.005
358 5 - 5/8 6 3/16 5.600 ± 0.037 0.210 ± 0.005
309 7/16 13/16 3/16 0.412 ± 0.005 0.210 ± 0.005 359 5 - 3/4 6 - 1/8 3/16 5.725 ± 0.037 0.210 ± 0.005
310 1/2 7/8 3/16 0.475 ± 0.005 0.210 ± 0.005 360 5 - 7/8 6 - 1/4 3/16 5.850 ± 0.037 0.210 ± 0.005
311 9/16 15/16 3/16 0.537 ± 0.007 0.210 ± 0.005 361 6 6 - 3/8 3/16 5.975 ± 0.037 0.210 ± 0.005
312 5/8 1 3/16 0.600 ± 0.009 0.210 ± 0.005 362 6 - 1/4 6 - 5/8 3/16 6.225 ± 0.040 0.210 ± 0.005
313 11/16 1 - 1/16 3/16 0.662 ± 0.009 0.210 ± 0.005 363 6 - 1/2 6 - 7/8 3/16 6.475 ± 0.040 0.210 ± 0.005
314 3/4 1 - 1/8 3/16 0.725 ± 0.010 0.210 ± 0.005 364 6 - 3/4 7 - 1/8 3/16 6.725 ± 0.040 0.210 ± 0.005
315 13/16 1 - 3/16 3/16 0.787 ± 0.010 0.210 ± 0.005 365 7 7 - 3/8 3/16 6.975 ± 0.040 0.210 ± 0.005
316 7/8 1 - 1/4 3/16 0.850 ± 0.010 0.210 ± 0.005 366 7 - 1/4 7 - 5/8 3/16 7.225 ± 0.045 0.210 ± 0.005
317 15/16 1 - 5/16 3/16 0.912 ± 0.010 0.210 ± 0.005 367 7 - 1/2 7 - 7/8 3/16 7.475 ± 0.045 0.210 ± 0.005
318 1 1 - 3/8 3/16 0.975 ± 0.010 0.210 ± 0.005 368 7 - 3/4 8 - 1/8 3/16 7.725 ± 0.045 0.210 ± 0.005
319 1 - 1/16 1 - 7/16 3/16 1.037 ± 0.010 0.210 ± 0.005 369 8 8 - 3/8 3/16 7.975 ± 0.045 0.210 ± 0.005
320 1 - 1/8 1 - 1/2 3/16 1.100 ± 0.012 0.210 ± 0.005 370 8 - 1/4 8 - 5/8 3/16 8.225 ± 0.050 0.210 ± 0.005
321 1 - 3/16 1 - 9/16 3/16 1.162 ± 0.012 0.210 ± 0.005 371 8 - 1/2 8 - 7/8 3/16 8.475 ± 0.050 0.210 ± 0.005
322 1 - 1/4 1 - 5/8 3/16 1.225 ± 0.012 0.210 ± 0.005 372 8 - 3/4 9 - 1/8 3/16 8.725 ± 0.050 0.210 ± 0.005
323 1 - 5/16 1 - 11/16 3/16 1.287 ± 0.012 0.210 ± 0.005 373 9 9 - 3/8 3/16 8.975 ± 0.050 0.210 ± 0.005
324 1 - 3/8 1 - 3/4 3/16 1.350 ± 0.012 0.210 ± 0.005 374 9 - 1/4 9 - 5/8 3/16 9.225 ± 0.055 0.210 ± 0.005
325 1 - 1/2 1 - 7/8 3/16 1.475 ± 0.015 0.210 ± 0.005 375 9 - 1/2 9 - 7/8 3/16 9.475 ± 0.055 0.210 ± 0.005
326 1 - 5/8 2 3/16 1.600 ± 0.015 0.210 ± 0.005 376 9 - 3/4 10 - 1/8 3/16 9.725 ± 0.055 0.210 ± 0.005
327 1 - 3/4 2 - 1/8 3/16 1.725 ± 0.015 0.210 ± 0.005 377 10 10 - 3/8 3/16 9.975 ± 0.055 0.210 ± 0.005
328 1 - 7/8 2 - 1/4 3/16 1.850 ± 0.015 0.210 ± 0.005 378 10 - 1/2 10 - 7/8 3/16 10.475 ± 0.060 0.210 ± 0.005
329 2 2 - 3/8 3/16 1.975 ± 0.018 0.210 ± 0.005 379 11 11 - 3/8 3/16 10.975 ± 0.060 0.210 ± 0.005
330 2 - 1/8 2 - 1/2 3/16 2.100 ± 0.018 0.210 ± 0.005 380 11 - 1/2 11 - 7/8 3/16 11.475 ± 0.065 0.210 ± 0.005
6 HITECHSEALS.COM
381 12 12 - 3/8 3/16 11.975 ± 0.065 0.210 ± 0.005 459 15 15 - 1/2 1/4 14.975 ± 0.070 0.275 ± 0.006
382 13 13 - 3/8 3/16 12.975 ± 0.065 0.210 ± 0.005 460 15 - 1/2 16 1/4 15.475 ± 0.070 0.275 ± 0.006
383 14 14 - 3/8 3/16 13.975 ± 0.070 0.210 ± 0.005 461 16 16 - 1/2 1/4 15.955 ± 0.075 0.275 ± 0.006
384 15 15 - 3/8 3/16 14.975 ± 0.070 0.210 ± 0.005 462 16 - 1/2 17 1/4 16.455 ± 0.075 0.275 ± 0.006
385 16 16 - 3/8 3/16 15.955 ± 0.075 0.210 ± 0.005 463 17 17 - 1/2 1/4 16.955 ± 0.080 0.275 ± 0.006
O-Rings
386 17 17 - 3/8 3/16 16.955 ± 0.080 0.210 ± 0.005 464 17 - 1/2 18 1/4 17.455 ± 0.085 0.275 ± 0.006
387 18 18 - 3/8 3/16 17.955 ± 0.085 0.210 ± 0.005 465 18 18 - 1/2 1/4 17.955 ± 0.085 0.275 ± 0.006
388 19 19 - 3/8 3/16 18.952 ± 0.090 0.210 ± 0.005 466 18 - 1/2 19 1/4 18.455 ± 0.085 0.275 ± 0.006
389 20 20 - 3/8 3/16 19.952 ± 0.095 0.210 ± 0.005 467 19 19 - 1/2 1/4 18.955 ± 0.090 0.275 ± 0.006
390 21 21 - 3/8 3/16 20.952 ± 0.095 0.210 ± 0.005 468 19 - 1/2 20 1/4 19.455 ± 0.090 0.275 ± 0.006
391 22 22 - 3/8 3/16 21.952 ± 0.100 0.210 ± 0.005 469 20 20 - 1/2 1/4 19.955 ± 0.095 0.275 ± 0.006
392 23 23 - 3/8 3/16 22.940 ± 0.105 0.210 ± 0.005 470 21 21 - 1/2 1/4 20.955 ± 0.095 0.275 ± 0.006
393 24 24 - 3/8 3/16 23.940 ± 0.110 0.210 ± 0.005 471 22 22 - 1/2 1/4 21.955 ± 0.100 0.275 ± 0.006
394 25 25 - 3/8 3/16 24.940 ± 0.115 0.210 ± 0.005 472 23 23 - 1/2 1/4 22.940 ± 0.105 0.275 ± 0.006
395 26 26 - 3/8 3/16 25.940 ± 0.120 0.210 ± 0.005 473 24 24 - 1/2 1/4 23.940 ± 0.110 0.275 ± 0.006
474 25 25 - 1/2 1/4 24.940 ± 0.115 0.275 ± 0.006
425 4 - 1/2 5 1/4 4.475 ± 0.033 0.275 ± 0.006 475 26 26 - 1/2 1/4 25.940 ± 0.120 0.275 ± 0.006
426 4 - 5/8 5 - 1/8 1/4 4.600 ± 0.033 0.275 ± 0.006
427 4 - 3/4 5 - 1/4 1/4 4.725 ± 0.033 0.275 ± 0.006 We offer O-rings in sizes ranging from 400-424. These O-ring size dimen-
428 4 - 7/8 5 - 3/8 1/4 4.850 ± 0.033 0.275 ± 0.006 sions and tolerances are unassigned under ISO 3601. In addition, We stock
429 5 5 - 1/2 1/4 4.975 ± 0.037 0.275 ± 0.006 specific non-standard cross-section O-rings such as 3/8”, 1/2” and 3/4”.
430 5 - 1/8 5 - 5/8 1/4 5.100 ± 0.037 0.275 ± 0.006
431 5 - 1/4 5 - 3/4 1/4 5.225 ± 0.037 0.275 ± 0.006 O-Rings for Tube Fitting Bosses
432 5 - 3/8 5 - 7/8 1/4 5.350 ± 0.037 0.275 ± 0.006
433 5 - 1/2 6 1/4 5.475 ± 0.037 0.275 ± 0.006 Tube Hydraulic O-ring Size (Actual)
434 5 - 5/8 6 - 1/8 1/4 5.600 ± 0.037 0.275 ± 0.006 Dash Size OD MIL-P-5570
435 5 - 3/4 6 - 1/4 1/4 5.725 ± 0.037 0.275 ± 0.006 # Inch MS28778 ID CS
436 5 - 7/8 6 - 3/8 1/4 5.850 ± 0.037 0.275 ± 0.006 901 3/32 0.185 ± 0.005 0.056 ± 0.003
437 6 6 - 1/2 1/4 5.975 ± 0.037 0.275 ± 0.006 902 1/8 2 0.239 ± 0.005 0.064 ± 0.003
438 6 - 1/4 6 - 3/4 1/4 6.225 ± 0.040 0.275 ± 0.006 903 3/16 3 0.301 ± 0.005 0.064 ± 0.003
439 6 - 1/2 7 1/4 6.475 ± 0.040 0.275 ± 0.006 904 1/4 4 0.351 ± 0.005 0.072 ± 0.003
440 6 - 3/4 7 - 1/4 1/4 6.725 ± 0.040 0.275 ± 0.006 905 5/16 5 0.414 ± 0.005 0.072 ± 0.003
441 7 7 - 1/2 1/4 6.975 ± 0.040 0.275 ± 0.006 906 3/8 6 0.468 ± 0.005 0.078 ± 0.003
442 7 - 1/4 7 - 3/4 1/4 7.225 ± 0.045 0.275 ± 0.006 907 7/16 0.530 ± 0.005 0.082 ± 0.003
443 7 - 1/2 8 1/4 7.475 ± 0.045 0.275 ± 0.006 908 1/2 8 0.644 ± 0.009 0.087 ± 0.003
444 7 - 3/4 8 - 1/4 1/4 7.725 ± 0.045 0.275 ± 0.006 909 9/16 0.706 ± 0.009 0.097 ± 0.003
445 8 8 - 1/2 1/4 7.975 ± 0.045 0.275 ± 0.006 910 5/8 10 0.755 ± 0.009 0.097 ± 0.003
446 8 - 1/2 9 1/4 8.475 ± 0.055 0.275 ± 0.006 911 11/16 0.863 ± 0.009 0.116 ± 0.004
447 9 9 - 1/2 1/4 8.975 ± 0.055 0.275 ± 0.006 912 3/4 12 0.924 ± 0.009 0.116 ± 0.004
448 9 - 1/2 10 1/4 9.475 ± 0.055 0.275 ± 0.006 913 13/16 0.986 ± 0.010 0.116 ± 0.004
449 10 10 - 1/2 1/4 9.975 ± 0.055 0.275 ± 0.006 914 7/8 14 1.048 ± 0.010 0.116 ± 0.004
450 10 - 1/2 11 1/4 10.475 ± 0.060 0.275 ± 0.006 916 1 16 1.171 ± 0.010 0.116 ± 0.004
451 11 11 - 1/2 1/4 10.975 ± 0.060 0.275 ± 0.006 918 1-1/8 1.355 ± 0.012 0.116 ± 0.004
452 11 - 1/2 12 1/4 11.475 ± 0.060 0.275 ± 0.006 920 1-1/4 20 1.475 ± 0.014 0.118 ± 0.004
453 12 12 - 1/2 1/4 11.975 ± 0.060 0.275 ± 0.006 924 1-1/2 24 1.720 ± 0.014 0.118 ± 0.004
454 12 - 1/2 13 1/4 12.475 ± 0.060 0.275 ± 0.006 928 1-3/4 28 2.090 ± 0.018 0.118 ± 0.004
455 13 13 - 1/2 1/4 12.975 ± 0.060 0.275 ± 0.006
932 2 32 2.337 ± 0.018 0.118 ± 0.004
456 13 - 1/2 14 1/4 13.475 ± 0.070 0.275 ± 0.006
457 14 14 - 1/2 1/4 13.975 ± 0.070 0.275 ± 0.006
458 14 - 1/2 15 1/4 14.475 ± 0.070 0.275 ± 0.006
HITECHSEALS.COM 7
O-Ring Cord Imperial Seals

O-Ring Cord

Cross - Sections (inches)

0.063 0.250 0.625
0.093 0.275 0.687
0.103 0.312 0.750
0.125 0.375 0.872
0.139 0.437 1.000
0.188 0.500
O-Ring Square Cut Ring Quad Ring 0.210 0.562
Product Description
O-ring cord is excellent for large diameter static applications. Our O-ring cord is sold by the foot. Custom O-ring sizes can
be manufactured through our in-house splice and vulcanizing service. For groove information refer to the O-ring section
which begins on page 1.
Part Numbers: Quad Cord

CO ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ COQ - ___ ___ ___ ___ ___ ___ ___
C/S C/S Blank - Nitrile

V - Viton™/Fluorocarbon
N - Nitrile/Neoprene NEO - Neoprene S - Silicone
V - Viton™/Fluorocarbon HNBR - Hydrogenated Nitrile E - EPDM
S - Silicone SPONGE - Sponge Material
E - EPDM S - Square Cut
Example: COV 139S - Square Viton™ Cord, 0.139” C/S

Example: COQ 500 - Quad Nitrile Cord, 0.500” C/S
8 HITECHSEALS.COM
Imperial Seals O-Ring Kits

Nitrile 70 Durometer -40°C to 120°C
O-Ring Kits
Product Description
We offer O-ring kits in popular materials such as nitrile, hydrogenated nitrile, Viton™/fluorocarbon, EPDM and silicone.
Standard kits come filled with nearly 350 O-rings in 30 of the most popular imperial sizes, making this an excellent tool for
shops, maintenance workers, or crews out in the field. We also offers BOSS (ORB) kits, ORS kits, spliced O-ring kit, O-ring
board and O-ring warehouse.
Part Numbers:
KIT - ___ ___ ___ ___ ___ ___ ___
Description
Example: KIT V75 - Viton™, 75 Durometer O-Ring Kit
HITECHSEALS.COM 9
O-Ring Kits Imperial Seals
Standard Kits
Standard Kits Standard Kit Content

Part Number Description Dash # Quantity Dash # Quantity
KIT N70 Nitrile, 70 Durometer O-Ring Kit 006 20 211 10
O-Ring Kits
007 20 212 10
KIT N90 Nitrile, 90 Durometer O-Ring Kit
008 20 213 10
KIT QN7 Nitrile, 70 Durometer Quad Ring Kit 009 20 214 10
KIT HS8 Hydrogenated Nitrile, 80 Durometer O-Ring Kit 010 20 215 10
KIT V75 Viton™, 75 Durometer O-Ring Kit 011 20 216 10
012 20 217 10
KIT V90 Viton™, 90 Durometer O-Ring Kit
110 13 218 10
KIT S70 Silicone, 70 Durometer O-Ring Kit 111 13 219 10
KIT E70 EPDM, 70 Durometer O-Ring Kit 112 13 220 10
KIT BUN Nitrile, Back-Up Ring Kit 113 13 221 10
114 13 222 10
Each standard kit contains contents represented by the imperial 115 13 325 7
O-ring sizes listed in the chart to the right. 116 13 326 7
210 10 327 7
Kits
Part Number:
Part Number:*KIT
*KITORB
ORB Part
PartNumber:
Number:*KIT
*KITORS
ORS Part Number:
Part Number: *KIT SPLICING
*KIT ORS
O-Ring Quantity O-Ring Quantity O-Ring C/S Quantity
N90 901 10 N90 011 25 CON 070 0.070” 7 ft.
N90 902 10 N90 012 25 CON 103 0.103” 7 ft.
N90 903 10 N90 014 25 CON 139 0.139” 7 ft.
N90 904 10 N90 016 20 CON 210 0.210” 7 ft.
N90 905 10 N90 018 20 CON 275 0.275” 7 ft.
N90 906 12 N90 021 15 Cutting Tool 1 unit
N90 907 12 N90 025 10 Splicing Tool 1 unit
N90 908 12 N90 029 10 KIT GLUE 1 unit
N90 909 12
N90 910 12 KIT ORS is also available in
N90 911 10
Viton™ material (KIT ORSV90)
N90 912 10
N90 913 10
N90 914 10
N90 916 10
N90 918 10
N90 920 10
N90 924 10
N90 928 10
N90 932 10
KIT ORB is also available in Viton™

material (KIT ORBV)
10 HITECHSEALS.COM
Imperial Seals O-Ring Kits
O-Ring Warehouse
O-Ring Warehouse
O-ring warehouses are an exceptional counter top O-ring storage unit. The standard unit,
KIT WHSE1 is equipped with 000 to 300 series O-rings in 70 durometer nitrile, and with
900 series O-rings provided in 90 durometer nitrile.
O-Rings Kits
The O-ring warehouse is also available in a fully 90 durometer nitrile and a 75 durometer
fluorocarbon.
Part Number: KIT WHSE1
Dash # Quantity Dash # Quantity Dash # Quantity

001 thru 016 20 143 thru 146 3 331 thru 338 2
017 thru 024 10 147 thru 151 2 901 thru 914 5
025 thru 031 7 210 thru 216 10 916 5
032 thru 043 5 217 thru 229 5 918 5
044 thru 046 2 230 thru 232 3 920 5
110 thru 116 15 233 thru 237 2 924 5
117 thru 124 10 325 thru 328 5 928 5
125 thru 142 5 329 thru 330 4 932 5
O-Ring Board
O-ring boards come equipped with 1325 O-rings in 152 sizes. This is a perfect accessory for
any shop or maintenance area. The O-ring board mounts sturdily to the wall. All hardware
is included.
Part Number: N70 BOARD
Dash # Quantity Other materials and durometers are

available upon request. Replacement
006 thru 028 10 each
O-rings are available through
Hi-Tech Seals.
325 thru 350 5 each
425 thru 437 5 each
HITECHSEALS.COM 11
Back-Up Rings Imperial Seals

Back-Up Rings

PEEK -70°C to 260°C
Hytrel® -54°C to 149°C
Urethane -54°C to 105°C
Solid Flat Scarf Cut Spiral Cut Solid Contoured Butt Cut
(27595) (28774) (28782)
Product Description
Back-up rings are plastic or rubber rings used to prevent the O-ring from entering the clearance gap. When high pressures
are exerted on the O-ring, its soft rubber material can be forced into the clearance gap causing the O-ring to extrude (see our
O-ring brochure for examples of O-ring failure). The hard back-up ring material will keep the O-ring material from flowing
into the gap, which will prevent premature failure. MIL spec numbers 27595, 28774, and 28782 are for reference purposes
only. PTFE back-up rings are manufactured to our specifications.
Part Numbers:
BU ___ - ___ ___ ___ ___ ___ ___ ___ ___
Dash Size*
N - Nitrile Cut Style for PTFE Back-Ups:
V - Viton™ 27595 - Solid Flat
T - PTFE 28774 - Scarf Cut
P - PEEK 28782 - Spiral Cut
H - Hytrel® Blank - Elastomer Rings
U - Urethane
12 HITECHSEALS.COM
Imperial Seals Back-Up Rings
Solid PTFE (MS 27595)
I.D.
Back-Up Rings
W
Part T W Part T W
Number I.D. ± 0.002 ± 0.002 Number I.D. ± 0.002 ± 0.002
BUT 001 27595 0.041 0.040 0.030 BUT 037 27595 2.508
BUT 002 27595 0.054 0.040 BUT 038 27595 2.633
0.045
BUT 003 27595 0.068 0.047 BUT 039 27595 2.758
BUT 004 27595 0.082 BUT 040 27595 2.883
BUT 005 27595 0.113 BUT 041 27595 3.008
BUT 006 27595 0.127 BUT 042 27595 3.258
BUT 007 27595 0.158 BUT 043 27595 3.508
± 0.003 0.050 0.055
BUT 008 27595 0.189 BUT 044 27595 3.758
BUT 009 27595 0.221 BUT 045 27595 4.008
BUT 010 27595 0.252 BUT 046 27595 4.258
BUT 011 27595 0.314 BUT 047 27595 4.508
BUT 012 27595 0.377 BUT 048 27595 4.758
BUT 013 27595 0.442 BUT 049 27595 5.008
BUT 014 27595 0.505 BUT 050 27595 5.258
BUT 015 27595 0.567
BUT 016 27595 0.630 BUT 102 27595 0.063
BUT 017 27595 0.692 BUT 103 27595 0.095
BUT 018 27595 0.755 BUT 104 27595 0.126
BUT 019 27595 0.817 ± 0.003 0.050 0.055 BUT 105 27595 0.157
BUT 020 27595 0.883 BUT 106 27595 0.188
BUT 021 27595 0.945 BUT 107 27595 0.220
BUT 022 27595 1.008 BUT 108 27595 0.251
BUT 023 27595 1.070 BUT 109 27595 0.313
BUT 024 27595 1.133 BUT 110 27595 0.376
BUT 025 27595 1.195 BUT 111 27595 0.439
BUT 026 27595 1.258 BUT 112 27595 0.501 ± 0.003 0.050 0.088
BUT 027 27595 1.320 BUT 113 27595 0.564
BUT 028 27595 1.383 BUT 114 27595 0.626
BUT 029 27595 1.508 BUT 115 27595 0.689
BUT 030 27595 1.633 BUT 116 27595 0.751
BUT 031 27595 1.758 BUT 117 27595 0.817
BUT 032 27595 1.883 BUT 118 27595 0.879
BUT 033 27595 2.088 BUT 119 27595 0.942
BUT 034 27595 2.133 BUT 120 27595 1.004
BUT 035 27595 2.258 BUT 121 27595 1.067
BUT 036 27595 2.383 BUT 122 27595 1.129
HITECHSEALS.COM 13
Solid PTFE
Solid PTFE (MS(MS 27595)
27595)
Part T W Part T W
BUT 123 27595 1.192 BUT 174 27595 8.756
BUT 124 27595 1.254 BUT 175 27595 9.006
Back-Up Rings
BUT 125 27595 1.317 BUT 176 27595 9.256 ± 0.005 0.050 0.088
BUT 126 27595 1.379 BUT 177 27595 9.506
BUT 127 27595 1.442 BUT 178 27595 9.756
BUT 128 27595 1.504
BUT 129 27595 1.567 BUT 201 27595 0.193
BUT 130 27595 1.631 BUT 202 27595 0.255
BUT 131 27595 1.693 BUT 203 27595 0.318
BUT 132 27595 1.756 BUT 204 27595 0.380
BUT 133 27595 1.818 BUT 205 27595 0.443
BUT 134 27595 1.881 BUT 206 27595 0.505
BUT 135 27595 1.944 BUT 207 27595 0.568
BUT 136 27595 2.006 BUT 208 27595 0.630
BUT 137 27595 2.069 BUT 209 27595 0.693
BUT 138 27595 2.131 BUT 210 27595 0.755
BUT 139 27595 2.194 BUT 211 27595 0.817
BUT 140 27595 2.256 BUT 212 27595 0.880
BUT 141 27595 2.319 BUT 213 27595 0.942
BUT 142 27595 2.381 BUT 214 27595 1.005
BUT 143 27595 2.444 BUT 215 27595 1.067
BUT 144 27595 2.506 BUT 216 27595 1.130
BUT 145 27595 2.569 BUT 217 27595 1.192
BUT 146 27595 2.631 BUT 218 27595 1.255
BUT 147 27595 2.694 ± 0.003 0.050 0.088 BUT 219 27595 1.317
BUT 148 27595 2.756 BUT 220 27595 1.380
BUT 149 27595 2.819 BUT 221 27595 1.442
BUT 150 27595 2.881 BUT 222 27595 1.505
BUT 151 27595 3.006 BUT 223 27595 1.631 ± 0.003 0.050 0.119
BUT 152 27595 3.256 BUT 224 27595 1.756
BUT 153 27595 3.506 BUT 225 27595 1.882
BUT 154 27595 3.756 BUT 226 27595 2.007
BUT 155 27595 4.006 BUT 227 27595 2.132
BUT 156 27595 4.256 BUT 228 27595 2.257
BUT 157 27595 4.506 BUT 229 27595 2.382
BUT 158 27595 4.756 BUT 230 27595 2.507
BUT 159 27595 5.006 BUT 231 27595 2.632
BUT 160 27595 5.256 BUT 232 27595 2.757
BUT 161 27595 5.506 BUT 233 27595 2.882
BUT 162 27595 5.756 BUT 234 27595 3.007
BUT 163 27595 6.006 BUT 235 27595 3.132
BUT 164 27595 6.256 BUT 236 27595 3.257
BUT 165 27595 6.506 BUT 237 27595 3.382
BUT 166 27595 6.756 BUT 238 27595 3.507
BUT 167 27595 7.006 BUT 239 27595 3.632
BUT 168 27595 7.256 BUT 240 27595 3.757
BUT 169 27595 7.506 BUT 241 27595 3.882
BUT 170 27595 7.756 BUT 242 27595 4.007
BUT 171 27595 8.006 BUT 243 27595 4.132
BUT 172 27595 8.256 BUT 244 27595 4.257
± 0.005
BUT 173 27595 8.506 BUT 245 27595 4.382
14 HITECHSEALS.COM
Solid PTFE (MS(MS
Solid PTFE 27595)
27595)
Part T W Part T W
BUT 246 27595 4.507 BUT 320 27595 1.124
Back-Up Rings
BUT 247 27595 4.632 BUT 321 27595 1.187
BUT 248 27595 4.757 BUT 322 27595 1.249
BUT 249 27595 4.882 BUT 323 27595 1.312
BUT 250 27595 5.007 BUT 324 27595 1.374
BUT 251 27595 5.132 BUT 325 27595 1.499
BUT 252 27595 5.257 BUT 326 27595 1.624
BUT 253 27595 5.382 BUT 327 27595 1.750
BUT 254 27595 5.507 BUT 328 27595 1.875
BUT 255 27595 5.632 BUT 329 27595 2.000
BUT 256 27595 5.757 ± 0.003 BUT 330 27595 2.125
BUT 257 27595 5.882 BUT 331 27595 2.250
BUT 258 27595 6.007 BUT 332 27595 2.375
BUT 259 27595 6.257 BUT 333 27595 2.500
BUT 260 27595 6.507 BUT 334 27595 2.625
BUT 261 27595 6.757 BUT 335 27595 2.750
BUT 262 27595 7.007 BUT 336 27595 2.875
BUT 263 27595 7.257 BUT 337 27595 3.000
BUT 264 27595 7.507 BUT 338 27595 3.125
BUT 265 27595 7.757 0.050 0.119 BUT 339 27595 3.250
BUT 266 27595 8.007 BUT 340 27595 3.375
BUT 267 27595 8.257 BUT 341 27595 3.500
BUT 268 27595 8.507 BUT 342 27595 3.625
BUT 269 27595 8.757 BUT 343 27595 3.750
BUT 270 27595 9.007 BUT 344 27595 3.875
± 0.003 0.073 0.185
BUT 271 27595 9.257 BUT 345 27595 4.000
BUT 272 27595 9.507 BUT 346 27595 4.125
BUT 273 27595 9.757 BUT 347 27595 4.250
BUT 274 27595 10.007 BUT 348 27595 4.375
BUT 275 27595 10.507 BUT 349 27595 4.500
± 0.005
BUT 276 27595 11.007 BUT 350 27595 4.625
BUT 277 27595 11.507 BUT 351 27595 4.750
BUT 278 27595 12.007 BUT 352 27595 4.875
BUT 279 27595 13.007 BUT 353 27595 5.000
BUT 280 27595 14.007 BUT 354 27595 5.125
BUT 281 27595 15.007 BUT 355 27595 5.250
BUT 282 27595 16.007 BUT 356 27595 5.375
BUT 283 27595 17.007 BUT 357 27595 5.500
BUT 284 27595 18.007 BUT 358 27595 5.625
BUT 359 27595 5.750
BUT 309 27595 0.437 BUT 360 27595 5.875
BUT 310 27595 0.499 BUT 361 27595 6.000
BUT 311 27595 0.562 BUT 362 27595 6.250
BUT 312 27595 0.624 BUT 363 27595 6.500
BUT 313 27595 0.687 BUT 364 27595 6.750
BUT 314 27595 0.749 ± 0.003 0.073 0.185 BUT 365 27595 7.000
BUT 315 27595 0.812 BUT 366 27595 7.250
BUT 316 27595 0.874 BUT 367 27595 7.500
BUT 317 27595 0.937 BUT 368 27595 7.750
BUT 318 27595 0.999 BUT 369 27595 8.000
BUT 319 27595 1.062 BUT 370 27595 8.251 ± 0.005
HITECHSEALS.COM 15
Solid PTFE
Solid PTFE (MS (MS
27595)27595)
Part T W Part T W
BUT 371 27595 8.501 BUT 425 27595 4.504
BUT 372 27595 8.751 BUT 426 27595 4.629
BUT 373 27595 9.001 BUT 427 27595 4.754
Back-Up Rings
BUT 374 27595 9.251 BUT 428 27595 4.879

BUT 375 27595 9.501 BUT 429 27595 5.004
BUT 376 27595 9.751 BUT 430 27595 5.129
BUT 377 27595 10.001 BUT 431 27595 5.254
BUT 378 27595 10.501 BUT 432 27595 5.379
BUT 379 27595 11.001 BUT 433 27595 5.504
BUT 380 27595 11.501 BUT 434 27595 5.629
BUT 381 27595 12.001 BUT 435 27595 5.754 ± 0.003
BUT 382 27595 13.001 BUT 436 27595 5.879
BUT 383 27595 14.001 ± 0.005 0.073 0.185 BUT 437 27595 6.004
BUT 384 27595 15.001 BUT 438 27595 6.254
BUT 385 27595 16.001 BUT 439 27595 6.504
BUT 386 27595 17.001 BUT 440 27595 6.754
BUT 387 27595 18.001 BUT 441 27595 7.004
BUT 388 27595 19.001 BUT 442 27595 7.254
BUT 389 27595 20.001 BUT 443 27595 7.504
BUT 390 27595 21.001 BUT 444 27595 7.754
BUT 391 27595 22.001 BUT 445 27595 8.004
BUT 392 27595 23.001 BUT 446 27595 8.505
BUT 393 27595 24.001 BUT 447 27595 9.005
BUT 394 27595 25.001 BUT 448 27595 9.505
BUT 395 27595 26.001 BUT 449 27595 10.005
BUT 450 27595 10.505 0.108 0.236
BUT 400 27595 1.379 BUT 451 27595 11.005
BUT 401 27595 1.504 BUT 452 27595 11.505
BUT 402 27595 1.629 BUT 453 27595 12.005
BUT 403 27595 1.754 BUT 454 27595 12.505
BUT 404 27595 1.879 BUT 455 27595 13.005
BUT 405 27595 2.004 BUT 456 27595 13.505
BUT 406 27595 2.129 BUT 457 27595 14.005
BUT 407 27595 2.254 BUT 458 27595 14.505
BUT 408 27595 2.379 BUT 459 27595 15.005
BUT 409 27595 2.504 BUT 460 27595 15.505
± 0.005
BUT 410 27595 2.629 BUT 461 27595 16.005
BUT 411 27595 2.754 BUT 462 27595 16.505
BUT 412 27595 2.879 ± 0.003 0.108 0.236 BUT 463 27595 17.005
BUT 413 27595 3.004 BUT 464 27595 17.505
BUT 414 27595 3.129 BUT 465 27595 18.005
BUT 415 27595 3.254 BUT 466 27595 18.505
BUT 416 27595 3.379 BUT 467 27595 19.005
BUT 417 27595 3.504 BUT 468 27595 19.505
BUT 418 27595 3.629 BUT 469 27595 20.005
BUT 419 27595 3.754 BUT 470 27595 21.005
BUT 420 27595 3.879 BUT 471 27595 22.005
BUT 421 27595 4.004 BUT 472 27595 23.005
BUT 422 27595 4.129 BUT 473 27595 24.005
BUT 423 27595 4.254 BUT 474 27595 25.005
BUT 424 27595 4.379 BUT 475 27595 26.005
16 HITECHSEALS.COM
Scarf PTFE (MS
Scarf PTFE 28774)
(MS 28774)
I.D. A°
Back-Up Rings
G
W
Part T W Part T W
Number I.D. ± 0.002 G A° Number I.D. ± 0.002 G A°
BUT 001 28774 0.072 0.030 BUT 036 28774 2.400
BUT 002 28774 0.085 0.038 BUT 037 28774 2.525
39 +0 -4
BUT 003 28774 0.097 0.045 BUT 038 28774 2.650
BUT 004 28774 0.111 BUT 039 28774 2.775
BUT 005 28774 0.126 33 +0 -3 BUT 040 28774 2.900
BUT 006 28774 0.142 30 +0 -3 BUT 041 28774 3.025
BUT 007 28774 0.173 26 +0 -3 BUT 042 28774 3.275
0.053 0.005
BUT 008 28774 0.204 BUT 043 28774 3.525
to
BUT 009 28774 0.236 BUT 044 28774 3.775
0.000
BUT 010 28774 0.267 BUT 045 28774 4.025
BUT 011 28774 0.329 BUT 046 28774 4.275
BUT 012 28774 0.392 BUT 047 28774 4.525
BUT 013 28774 0.457 BUT 048 28774 4.775
BUT 014 28774 0.520 BUT 049 28774 5.025
BUT 015 28774 0.582 BUT 050 28774 5.275
BUT 016 28774 0.645 BUT 102 28774 0.080
BUT 017 28774 0.707 BUT 103 28774 0.111
BUT 018 28774 0.770 BUT 104 28774 0.142
± 0.003 0.052 0.053 0.005 22 +0 -3
BUT 019 28774 0.832 to to BUT 105 28774 0.173
BUT 020 28774 0.900 0.045 0.000 BUT 106 28774 0.205
22 +0
BUT 021 28774 0.962 BUT 107 28774 0.236 ± 0.003 0.052 0.086 0.006 -3
BUT 022 28774 1.025 BUT 108 28774 0.267 to to
BUT 023 28774 1.087 BUT 109 28774 0.330 0.045 0.000
BUT 024 28774 1.150 BUT 110 28774 0.392
BUT 025 28774 1.212 BUT 111 28774 0.454
BUT 026 28774 1.275 BUT 112 28774 0.517
BUT 027 28774 1.337 BUT 113 28774 0.579
BUT 028 28774 1.400 BUT 114 28774 0.642
BUT 029 28774 1.525 BUT 115 28774 0.704
BUT 030 28774 1.650 BUT 116 28774 0.767
BUT 031 28774 1.775 BUT 117 28774 0.834
BUT 032 28774 1.900 BUT 118 28774 0.897
BUT 033 28774 2.025 BUT 119 28774 0.959
BUT 034 28774 2.150 BUT 120 28774 1.022
BUT 035 28774 2.275 BUT 121 28774 1.084
HITECHSEALS.COM 17
Scarf PTFE (MS 28774)
Part T W Part T W
Number I.D. ± 0.002 G A° Number I.D. ± 0.002 G A°
BUT 122 28774 1.147 BUT 172 28774 8.447
BUT 123 28774 1.209 BUT 173 28774 8.697
BUT 124 28774 1.272 BUT 174 28774 8.947
Back-Up Rings
0.052 0.086 0.006

BUT 125 28774 1.334 BUT 175 28774 9.197 ± 0.003 22 +0 -3
to to
BUT 126 28774 1.399 BUT 176 28774 9.447 0.045 0.000
BUT 127 28774 1.461 BUT 177 28774 9.697
BUT 128 28774 1.524 BUT 178 28774 9.947
BUT 129 28774 1.586
BUT 130 28774 1.649 BUT 201 28774 0.196
BUT 131 28774 1.711 BUT 202 28774 0.258
BUT 132 28774 1.774 BUT 203 28774 0.321
BUT 133 28774 1.836 BUT 204 28774 0.383
BUT 134 28774 1.899 BUT 205 28774 0.446
BUT 135 28774 1.961 BUT 206 28774 0.508
BUT 136 28774 2.024 BUT 207 28774 0.571
BUT 137 28774 2.086 BUT 208 28774 0.633
BUT 138 28774 2.149 BUT 209 28774 0.696
BUT 139 28774 2.211 BUT 210 28774 0.758
BUT 140 28774 2.260 BUT 211 28774 0.821 0.006
to
BUT 141 28774 2.322 BUT 212 28774 0.883 0.000
BUT 142 28774 2.385 BUT 213 28774 0.946
BUT 143 28774 2.447 BUT 214 28774 1.008
BUT 144 28774 2.510 BUT 215 28774 1.071
BUT 145 28774 2.572 BUT 216 28774 1.133
BUT 146 28774 2.635 BUT 217 28774 1.196
± 0.003 0.052 0.086 0.006 22 +0 -3
BUT 147 28774 2.697 to to BUT 218 28774 1.258
BUT 148 28774 2.760 0.045 0.000 BUT 219 28774 1.321
BUT 149 28774 2.822 BUT 220 28774 1.383
BUT 150 28774 2.947 BUT 221 28774 1.446
± 0.003 0.052 0.119 22 +0 -3
BUT 151 28774 3.197 BUT 222 28774 1.508 to
BUT 152 28774 3.447 BUT 223 28774 1.633 0.045
BUT 153 28774 3.697 BUT 224 28774 1.758
BUT 154 28774 3.947 BUT 225 28774 1.883
BUT 155 28774 4.197 BUT 226 28774 2.008
BUT 156 28774 4.447 BUT 227 28774 2.133
BUT 157 28774 4.697 BUT 228 28774 2.258
BUT 158 28774 4.947 BUT 229 28774 2.383
BUT 159 28774 5.197 BUT 230 28774 2.508
BUT 160 28774 5.447 BUT 231 28774 2.633
BUT 161 28774 5.697 BUT 232 28774 2.758 0.007
to
BUT 162 28774 5.947 BUT 233 28774 2.883 0.000
BUT 163 28774 6.197 BUT 234 28774 3.008
BUT 164 28774 6.447 BUT 235 28774 3.133
BUT 165 28774 6.697 BUT 236 28774 3.258
BUT 166 28774 6.947 BUT 237 28774 3.383
BUT 167 28774 7.197 BUT 238 28774 3.508
BUT 168 28774 7.447 BUT 239 28774 3.633
BUT 169 28774 7.697 BUT 240 28774 3.758
BUT 170 28774 7.947 BUT 241 28774 3.883
BUT 171 28774 8.197 BUT 242 28774 4.008
18 HITECHSEALS.COM
Scarf PTFE (MS(MS
Scarf PTFE 28774)
28774)
Part T W Part T W
Number I.D. ± 0.005 ± 0.002 G A° Number I.D. ± 0.005 ± 0.002 G A°
BUT 243 28774 4.133 BUT 316 28774 0.890
BUT 244 28774 4.258 BUT 317 28774 0.953
Back-Up Rings
BUT 245 28774 4.383 BUT 318 28774 1.015
BUT 246 28774 4.508 BUT 319 28774 1.078
BUT 247 28774 4.633 BUT 320 28774 1.140
BUT 248 28774 4.758 BUT 321 28774 1.203
BUT 249 28774 4.883 BUT 322 28774 1.265
BUT 250 28774 5.008 BUT 323 28774 1.328
BUT 251 28774 5.133 BUT 324 28774 1.390
BUT 252 28774 5.258 BUT 325 28774 1.515
BUT 253 28774 5.383 BUT 326 28774 1.640
BUT 254 28774 5.508 BUT 327 28774 1.765
BUT 255 28774 5.633 BUT 328 28774 1.890
BUT 256 28774 5.758 BUT 329 28774 2.015
BUT 257 28774 5.883 BUT 330 28774 2.140
BUT 258 28774 6.008 BUT 331 28774 2.270
BUT 259 28774 6.258 BUT 332 28774 2.395
BUT 260 28774 6.508 BUT 333 28774 2.520
BUT 261 28774 6.758 BUT 334 28774 2.645
BUT 262 28774 7.008 BUT 335 28774 2.770
BUT 263 28774 7.258 BUT 336 28774 2.895
± 0.003 0.052 0.119 0.007 22 +0 -3
BUT 264 28774 7.508 to to BUT 337 28774 3.020
BUT 265 28774 7.758 0.045 0.000 BUT 338 28774 3.145
BUT 266 28774 8.008 BUT 339 28774 3.275
BUT 267 28774 8.258 BUT 340 28774 3.400
± 0.003 0.070 0.183 0.007 22 +0 -3
BUT 268 28774 8.508 BUT 341 28774 3.525 to
BUT 269 28774 8.758 BUT 342 28774 3.650 0.000
BUT 270 28774 9.008 BUT 343 28774 3.775
BUT 271 28774 9.258 BUT 344 28774 3.900
BUT 272 28774 9.508 BUT 345 28774 4.030
BUT 273 28774 9.758 BUT 346 28774 4.155
BUT 274 28774 10.008 BUT 347 28774 4.280
BUT 275 28774 10.508 BUT 348 28774 4.405
BUT 276 28774 11.008 BUT 349 28774 4.530
BUT 277 28774 11.508 BUT 350 28774 4.655
BUT 278 28774 12.008 BUT 351 28774 4.780
BUT 279 28774 13.008 BUT 352 28774 4.905
BUT 280 28774 14.008 BUT 353 28774 5.030
BUT 281 28774 15.008 BUT 354 28774 5.155
BUT 282 28774 16.008 BUT 355 28774 5.280
BUT 283 28774 17.008 BUT 356 28774 5.405
BUT 284 28774 18.008 BUT 357 28774 5.530
BUT 358 28774 5.655
BUT 309 28774 0.453 BUT 359 28774 5.780
BUT 310 28774 0.515 BUT 360 28774 5.905
BUT 311 28774 0.578 BUT 361 28774 6.030
± 0.003 0.070 0.183 0.007 22 +0 -3
BUT 312 28774 0.640 BUT 362 28774 6.280
to
BUT 313 28774 0.703 0.000 BUT 363 28774 6.530
BUT 314 28774 0.765 BUT 364 28774 6.780
BUT 315 28774 0.828 BUT 365 28774 7.030
HITECHSEALS.COM 19
Scarf PTFE
Scarf PTFE (MS(MS
28774)28774)
Part T W Part T W
Number I.D. ± 0.005 ± 0.002 G A° Number I.D. ± 0.005 ± 0.002 G A°
BUT 366 28774 7.280 BUT 442 28774 7.276
Back-Up Rings
BUT 367 28774 7.530 BUT 443 28774 7.526

BUT 368 28774 7.780 BUT 444 28774 7.776
0.008
BUT 369 28774 8.030 BUT 445 28774 8.026
to
BUT 370 28774 8.280 BUT 446 28774 8.526
± 0.000
BUT 371 28774 8.530 BUT 447 28774 9.026
BUT 372 28774 8.780 BUT 448 28774 9.526
BUT 373 28774 9.030 BUT 449 28774 10.026
BUT 374 28774 9.280 BUT 450 28774 10.526
BUT 375 28774 9.530 BUT 451 28774 11.026
BUT 376 28774 9.780 BUT 452 28774 11.526
BUT 377 28774 10.030 BUT 453 28774 12.026
BUT 378 28774 10.530 BUT 454 28774 12.526
BUT 379 28774 11.030 BUT 455 28774 13.026
BUT 380 28774 11.530 22 +0 BUT 456 28774 13.526
± 0.003 0.070 0.183 0.007 BUT 457 28774 14.026
BUT 381 28774 12.030 -3
to
BUT 382 28774 13.030 BUT 458 28774 14.526 22 +0
0.000 ± 0.003 0.105 0.236
BUT 383 28774 14.030 BUT 459 28774 15.026 -3
0.010
BUT 384 28774 15.030 BUT 460 28774 15.526
to
BUT 385 28774 16.030 BUT 461 28774 16.026
0.000
BUT 386 28774 17.030 BUT 462 28774 16.526
BUT 387 28774 18.030 BUT 463 28774 17.026
BUT 388 28774 19.030 BUT 464 28774 17.526
BUT 389 28774 20.030 BUT 465 28774 18.026
BUT 390 28774 21.030 BUT 466 28774 18.526
BUT 391 28774 22.030 BUT 467 28774 19.026
BUT 392 28774 23.030 BUT 468 28774 19.526
BUT 393 28774 24.030 BUT 469 28774 20.026
BUT 394 28774 25.030 BUT 470 28774 21.026
BUT 395 28774 26.030 BUT 471 28774 22.026
BUT 472 28774 23.026
BUT 425 28774 4.553 BUT 473 28774 24.026
BUT 426 28774 4.678 BUT 474 28774 25.026
BUT 427 28774 4.803 BUT 475 28774 26.026
BUT 428 28774 4.928
BUT 429 28774 5.053
BUT 430 28774 5.178
BUT 431 28774 5.303
BUT 432 28774 5.428
22 +0
BUT 433 28774 5.553 ± 0.003 0.105 0.236 0.008
-3
BUT 434 28774 5.678 to
BUT 435 28774 5.803 0.000
BUT 436 28774 5.928
BUT 437 28774 6.053
BUT 438 28774 6.276
BUT 439 28774 6.526
BUT 440 28774 6.776
BUT 441 28774 7.026
20 HITECHSEALS.COM
Contoured
ContouredSizes
Sizes
I.D.
Back-Up Rings
A
Dash No. I.D. W T A Dash No. I.D. W T A

004 0.096 040 2.893 ± 0.020
005 0.127 041 3.018
006 0.140 042 3.268 ± 0.024
007 0.171 043 3.518
008 0.202 044 3.768
± 0.027 0.053 0.045
009 0.234 045 4.018 0.049
± 0.005 ± 0.003 ± 0.003
010 0.265 046 4.268
011 0.327 047 4.518 ± 0.030
012 0.390 048 4.768
013 0.455 049 5.018
± 0.037
014 0.518 050 5.268
015 0.580
016 0.643 102 0.077
017 0.705 103 0.109
018 0.768 104 0.140
± 0.009
019 0.830 105 0.171
020 0.893 106 0.202
± 0.005
021 0.955 0.053 0.045 107 0.234
0.049
022 1.018 ± 0.003 ± 0.003 108 0.265
023 1.080 ± 0.010 109 0.327
024 1.143 110 0.390
025 1.205 111 0.452
026 1.268 ± 0.011 112 0.515
± 0.007
027 1.330 113 0.577 0.086 0.045
0.053
028 1.393 114 0.640 ± 0.003 ± 0.003
029 1.518 ± 0.013 115 0.702 ± 0.009
030 1.643 116 0.765
031 1.768 117 0.831
± 0.015
032 1.893 118 0.893
033 2.018 119 0.956
± 0.010
034 2.143 120 1.018
035 2.268 121 1.081
± 0.018
036 2.393 122 1.143
037 2.519 123 1.206
038 2.643 124 1.268 ± 0.012
039 2.768 ± 0.020 125 1.331
HITECHSEALS.COM 21
Contoured
Contoured SizesSizes

126 1.393 172 8.268
127 1.456 ± 0.012 173 8.518
Back-Up Rings
128 1.518 174 8.768 ± 0.050

0.086 0.045
129 1.581 175 9.018 0.053
± 0.003 ± 0.003
130 1.643 176 9.268
131 1.706 177 9.518
± 0.015 ± 0.055
132 1.768 178 9.768
133 1.831
134 1.893 201 0.202
135 1.956 202 0.265
136 2.018 203 0.327 ± 0.005
137 2.081 204 0.390
± 0.017
138 2.143 205 0.455
139 2.206 206 0.518
± 0.007
140 2.268 207 0.580
141 2.331 208 0.643
± 0.009
142 2.393 209 0.705
143 2.456 210 0.765
± 0.020
144 2.518 211 0.828
145 2.581 212 0.891
± 0.010
146 2.643 213 0.953
147 2.706 214 1.016
148 2.768 0.086 0.045 215 1.078
± 0.022 0.053
149 2.831 ± 0.003 ± 0.003 216 1.141
150 2.893 217 1.203
151 3.018 218 1.266
± 0.012
152 3.268 ± 0.024 219 1.334 0.118 0.040
0.050
153 3.518 220 1.397 ± 0.004 ± 0.003
154 3.768 221 1.459
± 0.028
155 4.018 222 1.522
156 4.268 223 1.647 ± 0.015
157 4.518 ± 0.030 224 1.772
158 4.768 225 1.897
159 5.018 226 2.022 ± 0.018
160 5.268 227 2.147
161 5.518 ± 0.035 228 2.272
162 5.768 229 2.397
± 0.020
163 6.018 230 2.522
164 6.268 231 2.631
165 6.518 232 2.756
± 0.040
166 6.768 233 2.881
167 7.018 234 3.006
168 7.268 235 3.131 ± 0.024
169 7.518 236 3.256
± 0.045
170 7.768 237 3.381
171 8.018 238 3.506
22 HITECHSEALS.COM
Contoured Sizes
Contoured Sizes

239 3.631 309 0.450 ± 0.005
Back-Up Rings
240 3.756 310 0.513
± 0.007
241 3.881 ± 0.028 311 0.575
242 4.006 312 0.638
± 0.009
243 4.131 313 0.700
244 4.256 314 0.763
245 4.381 315 0.825
246 4.506 ± 0.030 316 0.888
± 0.010
247 4.631 317 0.950
248 4.768 318 1.013
249 4.893 319 1.075
250 5.018 320 1.138
251 5.143 321 1.200
252 5.268 322 1.263 ± 0.012
253 5.393 323 1.316
± 0.035
254 5.518 324 1.388
255 5.643 325 1.513
256 5.768 326 1.638
± 0.015
257 5.893 327 1.763
258 6.018 328 1.888
259 6.268 329 2.013
260 6.518 330 2.138
± 0.040 ± 0.018
261 6.768 0.118 0.040 331 2.268 0.183 ± 0.060 ±
0.050 0.076
262 7.018 ± 0.004 ± 0.003 332 2.393 0.005 0.004
263 7.268 333 2.518
264 7.518 334 2.643
± 0.045 ± 0.020
265 7.768 335 2.768
266 8.018 336 2.893
267 8.268 337 3.018
268 8.518 338 3.143
± 0.050
269 8.768 339 3.273 ± 0.024
270 9.018 340 3.398
271 9.268 341 3.523
272 9.518 342 3.648
273 9.768 ± 0.055 343 3.773
274 10.018 344 3.898 ± 0.028
275 10.518 345 4.028
276 11.018 346 4.153
277 11.518 347 4.278
278 12.018 348 4.403
± 0.065
279 13.018 349 4.528
± 0.030
280 14.018 350 4.653
281 15.018 351 4.778
282 15.989 ± 0.075 352 4.903
283 16.989 ± 0.080 353 5.028
± 0.037
284 17.989 ± 0.085 354 5.153
HITECHSEALS.COM 23
Contoured
Contoured SizesSizes

355 5.278 429 5.051
356 5.403 430 5.176
Back-Up Rings
357 5.528 431 5.301

358 5.653 ± 0.037 432 5.426
359 5.778 433 5.551 ± 0.037
360 5.903 434 5.676
361 6.028 435 5.801
362 6.278 436 5.926
363 6.528 437 6.051
± 0.040 438 6.274
364 6.778
365 7.028 439 6.525
± 0.040
366 7.278 440 6.774
367 7.528 441 7.024
± 0.045 442 7.274
368 7.778
369 8.028 443 7.524
± 0.045
370 8.278 444 7.774
445 8.024
371 8.528
± 0.050 446 8.524
372 8.778
447 9.024
373 9.028 ± 0.055
448 9.524
374 9.278
0.183 0.060 449 10.024
375 9.528 0.076
± 0.055 ± 0.005 ± 0.004 450 10.524
376 9.778
451 11.024
377 10.028 0.236 0.096
452 11.524 0.117
378 10.528 ± 0.060 ± 0.006 ± 0.005
± 0.060 453 12.024
379 11.028
454 12.524
380 11.528
455 13.024
381 12.028 ± 0.065
456 13.524
382 13.028
457 14.024
383 14.028
± 0.070 458 14.524 ± 0.070
384 15.028
459 15.024
385 16.008 ± 0.075
460 15.524
386 17.008 ± 0.080 461 16.004
387 18.008 ± 0.085 ± 0.075
462 16.504
388 19.006 ± 0.090 463 17.004 ± 0.080
389 20.006 464 17.504
± 0.095
390 21.006 465 18.004 ± 0.085
391 22.006 ± 0.100 466 18.504
392 22.993 ± 0.105 467 19.004
393 23.993 ± 0.110 ± 0.090
468 19.504
394 24.993 ± 0.115 469 20.004
± 0.095
395 25.993 ± 0.120 470 21.004
471 22.004 ± 0.100
425 4.551 472 23.004 ± 0.105
426 4.676 0.236 0.096 473 24.004 ± 0.110
± 0.033 0.117
427 4.801 ± 0.006 ± 0.005 474 25.004 ± 0.115
428 4.926 475 26.004 ± 0.120
24 HITECHSEALS.COM
Imperial Seals T-Seals
Seal Materials Temp. Range
T-Seals
Back-up Ring Materials

Nylon -54°C to 121°C
Piston (TPO) Rod (TRO)

Product Description
T-seals have a double acting seal design that are available in both piston and rod profiles. A standard O-ring groove can
accommodate either a piston and rod profile. Their design aid in preventing extrusion up to 5000 psi. They are also a more
reliable options, as they help eliminate the rolling or spiraling associated with O-rings.
Our standard T-seals are composed of a nitrile sealing element and two split nylon back-up rings. A popular combination for
added chemical resistance is our Viton™ and PEEK T-seal.
Contact us for assistance when replacing an O-ring and back-up combination with a T-Seal.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Material - if other than Nitrile/Nylon

TPO - Piston TPO - Nom. O.D. Base Style:
TRO - Rod TRO - Nom. I.D. Blank - Standard (no back-up in o-ring groove)
1 - Intermediate Base (one back-up in o-ring groove)
2 - Wide Base (two back-up in o-ring groove)
Example: TPO 0875VPEEK - Viton™ Piston T-seal, PEEK Back-Up Rings, 7/8” Nom. O.D., 1/8” Nom. C/S
HITECHSEALS.COM 25
T-Seals Imperial Seals
Locking
Locking StyleStyle
T-Seals
Improve Ease of Installation

2
1 . Piston T-seals are available in locking profile which assists with the instillation
process. With the inter-locking design, customers benefit from:
1 • A reduced chance of installing the back-up rings incorrectly.
• The back-up rings lock into the T-seal element when assembled in the
seal gland.
2. Chamfered back-up ring reduces the possibility that the back-up ring can
be sheared off in a port or retaining ring groove during assembly.
The locking T-seal style is available for piston T-seals and capped piston T-seals. If installation issues occur when using T-seals, contact Hi-Tech Seals
and inquire about locking T-seals.
26 HITECHSEALS.COM
Piston Style
C
T-Seals
B A
Piston Clearance Limits
Bore Size Range Max. Dia. Clearance
0.250” to 0.500” 0.004”
0.501” to 1.750” 0.005”
1.751” to 4.875” 0.007”
15-20° 4.876” to 9.000” 0.009”
9.001” - up 0.010”
Nominal Reference A B C Nominal Reference A B C

Part Bore Groove Groove Part Bore Groove Groove
Numbers I.D. O.D. C/S Dia. Dia. Width Numbers I.D. O.D. C/S Dia. Dia. Width
+0.001 +0.002 +0.010
Tolerance Tolerance +0.001 +0.002 +0.010
-0.001 -0.000 -0.000
TPO 0375 3/16 3/8 3/32 0.375 0.190 0.150 TPO 20001 1 - 5/8 2 3/16 2.001 1.627 0.334
TPO 0437 1/4 7/16 3/32 0.437 0.252 0.150 TPO 20002 1 - 5/8 2 3/16 2.001 1.627 0.424
TPO 0500 5/16 1/2 3/32 0.500 0.315 0.150 TPO 2125 1 - 3/4 2 - 1/8 3/16 2.126 1.752 0.280
TPO 0562 5/16 9/16 1/8 0.562 0.317 0.185 TPO 2250 1 - 7/8 2 - 1/4 3/16 2.251 1.877 0.280
TPO 0625 3/8 5/8 1/8 0.625 0.380 0.185 TPO 22501 1 - 7/8 2 - 1/4 3/16 2.251 1.877 0.334
TPO 0687 7/16 11/16 1/8 0.687 0.442 0.185 TPO 22502 1 - 7/8 2 - 1/4 3/16 2.251 1.877 0.424
TPO 0750 1/2 3/4 1/8 0.750 0.505 0.185 TPO 2375 2 2 - 3/8 3/16 2.376 2.002 0.280
TPO 0812 9/16 13/16 1/8 0.812 0.567 0.185 TPO 23752 2 2 - 3/8 3/16 2.376 2.002 0.424
TPO 0875 5/8 7/8 1/8 0.875 0.630 0.185 TPO 2500 2 - 1/8 2 - 1/2 3/16 2.501 2.127 0.280
TPO 0937 11/16 15/16 1/8 0.937 0.692 0.185 TPO 25001 2 - 1/8 2 - 1/2 3/16 2.501 2.127 0.334
TPO 1000 3/4 1 1/8 1.001 0.756 0.185 TPO 25002 2 - 1/8 2 - 1/2 3/16 2.501 2.127 0.424
TPO 1062 13/16 1 - 1/16 1/8 1.063 0.818 0.185 TPO 2625 2 - 1/4 2 - 5/8 3/16 2.626 2.252 0.280
TPO 1125 7/8 1 - 1/8 1/8 1.126 0.881 0.185 +0.002 +0.003 +0.010
Tolerance
TPO 1187 15/16 1 - 3/16 1/8 1.188 0.943 0.185 -0.002 -0.001 -0.000
TPO 1250 1 1 - 1/4 1/8 1.251 1.006 0.185 TPO 2750 2 - 3/8 2 - 3/4 3/16 2.751 2.377 0.280
TPO 1312 1 - 1/16 1 - 5/16 1/8 1.313 1.068 0.185 TPO 27502 2 - 3/8 2 - 3/4 3/16 2.751 2.377 0.424
TPO 1375 1 - 1/8 1 - 3/8 1/8 1.376 1.131 0.185 TPO 2875 2 - 1/2 2 - 7/8 3/16 2.876 2.502 0.280
TPO 1437 1 - 3/16 1 - 7/16 1/8 1.438 1.193 0.185 TPO 28752 2 - 1/2 2 - 7/8 3/16 2.876 2.502 0.424
TPO 1500 1 - 1/4 1 - 1/2 1/8 1.501 1.256 0.185 TPO 3000 2 - 5/8 3 3/16 3.001 2.627 0.280
TPO 15001 1 - 1/4 1 - 1/2 1/8 1.501 1.256 0.235 TPO 30001 2 - 5/8 3 3/16 3.001 2.627 0.334
TPO 15002 1 - 1/4 1 - 1/2 1/8 1.501 1.256 0.304 TPO 30002 2 - 5/8 3 3/16 3.001 2.627 0.424
TPO 1562 1 - 5/16 1 - 9/16 1/8 1.563 1.318 0.185 TPO 3125 2 - 3/4 3 - 1/8 3/16 3.126 2.752 0.280
TPO 1625 1 - 3/8 1 - 5/8 1/8 1.626 1.381 0.185 TPO 3250 2 - 7/8 3 - 1/4 3/16 3.251 2.877 0.280
TPO 1687 1 - 7/16 1 - 11/16 1/8 1.688 1.442 0.185 TPO 3375 3 3 - 3/8 3/16 3.377 3.003 0.280
TPO 1750 1 - 1/2 1 - 3/4 1/8 1.751 1.506 0.185 TPO 3500 3 - 1/8 3 - 1/2 3/16 3.502 3.128 0.280
TPO 17501 1 - 1/2 1 - 3/4 1/8 1.751 1.506 0.235 TPO 35001 3 - 1/8 3 - 1/2 3/16 3.502 3.128 0.334
TPO 17502 1 - 1/2 1 - 3/4 1/8 1.751 1.506 0.304 TPO 35002 3 - 1/8 3 - 1/2 3/16 3.502 3.128 0.424
TPO 1875 1 - 1/2 1 - 7/8 3/16 1.876 1.502 0.280 TPO 3625 3 - 1/4 3 - 5/8 3/16 3.627 3.253 0.280
TPO 2000 1 - 5/8 2 3/16 2.001 1.627 0.280 TPO 3750 3 - 3/8 3 - 3/4 3/16 3.752 3.378 0.280
HITECHSEALS.COM 27
T-Seals Imperial Seals
Piston Style
Piston Style
T-Seals

+0.002 +0.003 +0.010 +0.003 +0.004 +0.010
Tolerance Tolerance
-0.002 -0.001 -0.000 -0.003 -0.002 -0.000
TPO 3875 3 - 1/2 3 - 7/8 3/16 3.877 3.503 0.280 TPO 6375 5 - 7/8 6 - 3/8 1/4 6.378 5.899 0.366
TPO 4000 3 - 5/8 4 3/16 4.002 3.628 0.280 TPO 6500 6 6 - 1/2 1/4 6.503 6.024 0.366
TPO 40001 3 - 5/8 4 3/16 4.002 3.628 0.334 TPO 65001 6 6 - 1/2 1/4 6.503 6.024 0.475
TPO 40002 3 - 5/8 4 3/16 4.002 3.628 0.424 TPO 65002 6 6 - 1/2 1/4 6.503 6.024 0.579
TPO 4125 3 - 3/4 4 - 1/8 3/16 4.127 3.753 0.280 TPO 6750 6 - 1/4 6 - 3/4 1/4 6.753 6.274 0.366
TPO 4250 3 - 7/8 4 - 1/4 3/16 4.252 3.878 0.280 TPO 7000 6 - 1/2 7 1/4 7.003 6.524 0.366
TPO 4375 4 4 - 3/8 3/16 4.377 4.003 0.280 TPO 70001 6 - 1/2 7 1/4 7.003 6.524 0.475
TPO 4500 4 - 1/8 4 - 1/2 3/16 4.502 4.128 0.280 TPO 70002 6 - 1/2 7 1/4 7.003 6.524 0.579
TPO 45001 4 - 1/8 4 - 1/2 3/16 4.502 4.128 0.334 TPO 7250 6 - 3/4 7 - 1/4 1/4 7.253 6.774 0.366
TPO 45002 4 - 1/8 4 - 1/2 3/16 4.502 4.128 0.424 TPO 7500 7 7 - 1/2 1/4 7.503 7.024 0.366
TPO 4625 4 - 1/4 4 - 5/8 3/16 4.627 4.253 0.280 TPO 75002 7 7 - 1/2 1/4 7.503 7.024 0.579
TPO 46251 4 - 1/4 4 - 5/8 3/16 4.627 4.253 0.334 TPO 7750 7 - 1/4 7 - 3/4 1/4 7.753 7.274 0.366
TPO 4750 4 - 3/8 4 - 3/4 3/16 4.752 4.378 0.280 TPO 8000 7 - 1/2 8 1/4 8.003 7.524 0.366
TPO 47502 4 - 3/8 4 - 3/4 3/16 4.752 4.378 0.424 TPO 80002 7 - 1/2 8 1/4 8.003 7.524 0.579
TPO 4875 4 - 1/2 4 - 7/8 3/16 4.877 4.503 0.280 TPO 8250 7 - 3/4 8 - 1/4 1/4 8.253 7.774 0.366
TPO 5000 4 - 5/8 5 3/16 5.003 4.629 0.280 TPO 82501 7 - 3/4 8 - 1/4 1/4 8.253 7.774 0.475
TPO 50001 4 - 5/8 5 3/16 5.003 4.629 0.334 TPO 8500 8 8 - 1/2 1/4 8.503 8.024 0.366
TPO 50002 4 - 1/2 5 1/4 5.000 4.524 0.475 TPO 9000 8 - 1/2 9 1/4 9.003 8.524 0.366
TPO 50003 4 - 1/2 5 1/4 5.000 4.524 0.579 TPO 90001 8 - 1/2 9 1/4 9.003 8.524 0.475
TPO 5125 4 - 5/8 5 - 1/8 1/4 5.128 4.649 0.366 TPO 90002 8 - 1/2 9 1/4 9.003 8.524 0.579
TPO 5250 4 - 3/4 5 - 1/4 1/4 5.253 4.774 0.366 TPO 9500 9 9 - 1/2 1/4 9.503 9.024 0.366
TPO 52502 4 - 3/4 5 - 1/4 1/4 5.253 4.774 0.579 TPO 10000 9 - 1/2 10 1/4 10.003 9.524 0.366
TPO 5375 4 - 7/8 5 - 3/8 1/4 5.378 4.899 0.366 TPO 100001 9 - 1/2 10 1/4 10.003 9.524 0.475
TPO 5500 5 5 - 1/2 1/4 5.503 5.024 0.366 TPO 10500 10 10 - 1/2 1/4 10.503 10.024 0.366
TPO 55001 5 5 - 1/2 1/4 5.503 5.024 0.475 TPO 11000 10 - 1/2 11 1/4 11.003 10.524 0.366
TPO 55002 5 5 - 1/2 1/4 5.503 5.024 0.579 TPO 11500 11 11 - 1/2 1/4 11.503 11.024 0.366
TPO 5625 5 - 1/8 5 - 5/8 1/4 5.628 5.149 0.366 TPO 12000 11 - 1/2 12 1/4 12.003 11.524 0.366
TPO 5750 5 - 1/4 5 - 3/4 1/4 5.753 5.274 0.366 TPO 120001 11 - 1/2 12 1/4 12.003 11.524 0.475
TPO 5875 5 - 3/8 5 - 7/8 1/4 5.878 5.399 0.366 TPO 12500 12 12 - 1/2 1/4 12.503 12.024 0.366
TPO 6000 5 - 1/2 6 1/4 6.003 5.524 0.366 TPO 13000 12 - 1/2 13 1/4 13.003 12.524 0.366
TPO 60001 5 - 1/2 6 1/4 6.003 5.524 0.475 TPO 130001 12 - 1/2 13 1/4 13.003 12.524 0.475
TPO 60002 5 - 1/2 6 1/4 6.003 5.524 0.579 TPO 13500 13 13 - 1/2 1/4 13.503 13.024 0.366
TPO 6125 5 - 3/8 6 - 1/8 1/4 6.128 5.649 0.366 TPO 14000 13 - 1/2 14 1/4 14.003 13.524 0.366
TPO 6250 5 - 3/4 6 - 1/4 1/4 6.253 5.774 0.366 TPO 140001 13 - 1/2 14 1/4 14.003 13.524 0.475
TPO 62501 5 - 3/4 6 - 1/4 1/4 6.253 5.774 0.475 TPO 15500 15 15 - 1/2 1/4 15.503 15.024 0.366
TPO 62502 5 - 3/4 6 - 1/4 1/4 6.253 5.774 0.579
28 HITECHSEALS.COM
Rod
RodStyle
Style
C
A B Throat Clearance Limits
T-Seals
Shaft Size Range Max. Dia. Clearance
0.123” to 0.375” 0.004”
0.376” to 1.500” 0.005”
1.501” to 4.500” 0.007”
4.501” to 8.500” 0.009”
8.501” - up 0.010”

Part Shaft Groove Groove Part Shaft Groove Groove
+0.001 +0.002 +0.010 +0.002 +0.001 +0.010
Tolerance Tolerance
-0.001 -0.002 -0.000 -0.002 -0.003 -0.000
TRO 0187 3/16 3/8 3/32 0.186 0.370 0.150 TRO 3000 3 3 - 3/8 3/16 2.996 3.370 0.280
TRO 0250 1/4 7/16 3/32 0.248 0.433 0.150 TRO 3125 3 - 1/8 3 - 1/2 3/16 3.121 3.495 0.280
TRO 0312 5/16 1/2 3/32 0.310 0.495 0.150 TRO 3250 3 - 1/4 3 - 5/8 3/16 3.246 3.620 0.280
TRO 0375 3/8 5/8 1/8 0.373 0.618 0.185 TRO 3375 3 - 3/8 3 - 3/4 3/16 3.371 3.745 0.280
TRO 0437 7/16 11/16 1/8 0.435 0.680 0.185 TRO 3500 3 - 1/2 3 - 7/8 3/16 3.496 3.870 0.280
TRO 0500 1/2 3/4 1/8 0.498 0.743 0.185 TRO 3625 3 - 5/8 4 3/16 3.621 3.995 0.280
TRO 0562 9/16 13/16 1/8 0.560 0.805 0.185 TRO 3750 3 - 3/4 4 - 1/8 3/16 3.746 4.120 0.280
TRO 0625 5/8 7/8 1/8 0.623 0.868 0.185 TRO 3875 3 - 7/8 4 - 1/4 3/16 3.871 4.245 0.280
TRO 0687 11/16 15/16 1/8 0.685 0.930 0.185 TRO 4000 4 4 - 3/8 3/16 3.996 4.370 0.280
TRO 0750 3/4 1 1/8 0.747 0.992 0.185 TRO 4125 4 - 1/8 4 - 1/2 3/16 4.121 4.495 0.280
TRO 0812 13/16 1 - 1/16 1/8 0.809 1.054 0.185 TRO 4250 4 - 1/4 4 - 5/8 3/16 4.246 4.620 0.280
TRO 0875 7/8 1 - 1/8 1/8 0.872 1.117 0.185 TRO 4375 4 - 3/8 4 - 3/4 3/16 4.371 4.745 0.280
TRO 0937 15/16 1 - 3/16 1/8 0.934 1.179 0.185 TRO 4500 4 - 1/2 4 - 7/8 3/16 4.496 4.870 0.280
TRO 1000 1 1 - 1/4 1/8 0.997 1.242 0.185 TRO 5000 5 5 - 1/2 1/4 4.996 5.475 0.366
TRO 1062 1 - 1/16 1 - 5/16 1/8 1.059 1.304 0.185 TRO 5250 5 - 1/4 5 - 3/4 1/4 5.246 5.725 0.366
TRO 1125 1 - 1/8 1 - 3/8 1/8 1.122 1.367 0.185 TRO 5500 5 - 1/2 6 1/4 5.496 5.975 0.366
TRO 1187 1 - 3/16 1 - 7/16 1/8 1.184 1.429 0.185 TRO 5625 5 - 5/8 6 - 1/8 1/4 5.621 6.100 0.366
TRO 1250 1 - 1/4 1 - 1/2 1/8 1.247 1.492 0.185 +0.003 +0.002 +0.010
TRO 1312 1 - 5/16 1 - 9/16 1/8 1.309 1.554 0.185 Tolerance
-0.003 -0.004 -0.000
TRO 1375 1 - 3/8 1 - 5/8 1/8 1.372 1.617 0.185 TRO 5875 5 - 7/8 6 - 3/8 1/4 5.871 6.350 0.366
TRO 1437 1 - 7/16 1 - 11/16 1/8 1.434 1.679 0.185 TRO 6000 6 6 - 1/2 1/4 5.996 6.475 0.366
TRO 1500 1 - 1/2 1 - 3/4 1/8 1.497 1.742 0.185 TRO 6250 6 - 1/4 6 - 3/4 1/4 6.246 6.725 0.366
TRO 15001 1 - 1/2 1 - 3/4 1/8 1.497 1.742 0.235 TRO 6500 6 - 1/2 7 1/4 6.496 6.975 0.366
TRO 1625 1 - 5/8 2 3/16 1.622 1.996 0.280 TRO 6750 6 - 3/4 7 - 1/4 1/4 6.746 7.225 0.366
TRO 1750 1 - 3/4 2 - 1/8 3/16 1.747 2.121 0.280 TRO 7000 7 7 - 1/2 1/4 6.996 7.475 0.366
TRO 1875 1 - 7/8 2 - 1/4 3/16 1.872 2.246 0.280 TRO 7250 7 - 1/4 7 - 3/4 1/4 7.246 7.725 0.366
TRO 2000 2 2 - 3/8 3/16 1.997 2.371 0.280 TRO 7500 7 - 1/2 8 1/4 7.500 7.984 0.366
TRO 2125 2 - 1/8 2 - 1/2 3/16 2.122 2.496 0.280 TRO 7750 7 - 3/4 8 - 1/4 1/4 7.746 8.225 0.366
TRO 2250 2 - 1/4 2 - 5/8 3/16 2.247 2.613 0.280 TRO 8000 8 8 - 1/2 1/4 7.996 8.475 0.366
+0.002 +0.001 +0.010 TRO 8500 8 - 1/2 9 1/4 8.500 8.984 0.366
Tolerance
-0.002 -0.003 -0.000 TRO 9000 9 9 - 1/2 1/4 8.996 9.475 0.366
TRO 2375 2 - 3/8 2 - 3/4 3/16 2.372 2.746 0.280 TRO 9500 9 - 1/2 10 1/4 9.496 9.975 0.366
TRO 2500 2 - 1/2 2 - 7/8 3/16 2.497 2.871 0.280 TRO 10000 10 10 - 1/2 1/4 9.996 10.475 0.366
TRO 2625 2 - 5/8 3 3/16 2.622 2.996 0.280 TRO 10500 10 - 1/2 11 1/4 10.496 10.975 0.366
TRO 2750 2 - 3/4 3 - 1/8 3/16 2.747 3.121 0.280 TRO 11000 11 11 - 1/2 1/4 10.996 11.475 0.366
TRO 2875 2 - 7/8 3 - 1/4 3/16 2.872 3.246 0.280 TRO 11500 11 - 1/2 12 1/4 11.496 11.975 0.366
HITECHSEALS.COM 29
Capped T-Seals Imperial Seals
Seal (Cap) Materials Temp. Range

15% Glass, 5% Moly PTFE -268°C to 288°C
Capped T-Seals
40% Bronze filled PTFE -268°C to 288°C
Energizer Materials
Ethylene Propylene -54°C to 150°C
Back-up Ring Material:

Other popular Back-up materials that are available

include PEEK and various PTFE compounds.
Product Description
Capped T-seals are double-acting, high pressure, high performance piston seals. They are designed to accommodate large
extrusion gaps. The major benefits of this design are its excellent extrusion resistance, low friction, and low wear, which are
all presented in a compact and stable design. Standard capped T-seals consist of four pieces; a nitrile energizer, a 15% glass,
5% moly PTFE cap, and two nylon anti-extrusion rings. Suitable for pressures up to 10000 PSI.
Improve Ease of Installation

1. With the inter-locking design, customers benefit from:
• A reduced chance of installing the back-up rings incorrectly.
1 • The back-up rings locking behind T-seal when assembled in the application.
2. Chamfered back-up ring reduces the possibility that the back-up ring can be sheared off
in a port or retaining ring groove during assembly.
2
Contact us if you have any issue installing a capped T-Seal.
Part Numbers:
CTS - ___ ___ ___ ___ ___ ___ ___ ___ ___ CAT* - ___ ___ ___ ___ 4
Nominal O.D. Material - if other than standard O.D.
Example: CTS 2500 - Capped T-seal, Nitrile Energizer, Glass/Moly PTFE Cap, Two Nylon Anti-Extrusion Rings,
2 - 1/2” Nominal ID
* Caterpillar equivalent style
30 HITECHSEALS.COM
Imperial Seals Capped T-Seals
R 0.015 to 0.035 C
D
E/2
Capped T-Seals
B A
15-20°
A B C D Nominal E*
Groove
Width
Part Bore Groove +0.010 Groove Capped Diametrical
Number Diameter Tolerance Diameter Tolerance -0.000 Depth T-Seal C/S Clearance
CTS 1500 1.500 +0.002 / - 0.000 1.126 +0.000 / - 0.002 0.424 0.187 3/16 0.025
CTS 1750 1.750 +0.002 / - 0.000 1.376 +0.000 / - 0.002 0.424 0.187 3/16 0.025
CTS 2000 2.000 +0.002 / - 0.000 1.626 +0.000 / - 0.002 0.424 0.187 3/16 0.025
CTS 2250 2.250 +0.002 / - 0.000 1.876 +0.000 / - 0.002 0.424 0.187 3/16 0.025
CTS 2500 2.500 +0.002 / - 0.000 2.126 +0.000 / - 0.002 0.424 0.187 3/16 0.025
CTS 2750 2.750 +0.002 / - 0.000 2.376 +0.000 / - 0.002 0.424 0.187 3/16 0.025
CTS 3000 3.000 +0.003 / - 0.000 2.520 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 3250 3.250 +0.003 / - 0.000 2.770 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 3500 3.500 +0.003 / - 0.000 3.020 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 3750 3.750 +0.003 / - 0.000 3.270 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 4000 4.000 +0.003 / - 0.000 3.520 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 4250 4.250 +0.003 / - 0.000 3.770 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 4500 4.500 +0.003 / - 0.000 4.020 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 4750 4.750 +0.003 / - 0.000 4.270 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 4780 4.780 +0.003 / - 0.000 4.300 +0.000 / - 0.003 0.579 0.240 1/4 0.030
CTS 5000 5.000 +0.004 / - 0.000 4.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 5250 5.250 +0.004 / - 0.000 4.520 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 5500 5.500 +0.004 / - 0.000 4.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 5750 5.750 +0.004 / - 0.000 5.020 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 6000 6.000 +0.004 / - 0.000 5.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 6250 6.250 +0.004 / - 0.000 5.520 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 6290 6.290 +0.004 / - 0.000 5.560 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 6500 6.500 +0.004 / - 0.000 5.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 6750 6.750 +0.004 / - 0.000 6.020 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 7000 7.000 +0.004 / - 0.000 6.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 7040 7.040 +0.004 / - 0.000 6.310 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 7250 7.250 +0.004 / - 0.000 6.520 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 7500 7.500 +0.004 / - 0.000 6.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 7540 7.540 +0.004 / - 0.000 6.810 +0.000 / - 0.004 0.750 0.365 3/8 0.035
HITECHSEALS.COM 31
Capped T-Seals Imperial Seals
Capped T-Seals
A B C D Nominal E*
Groove
Width
Part Bore Groove +0.010 Groove Capped Diametrical
Number Diameter Tolerance Diameter Tolerance -0.000 Depth T-Seal C/S Clearance
CTS 7750 7.750 +0.004 / - 0.000 7.020 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 7800 7.800 +0.004 / - 0.000 7.070 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 8000 8.000 +0.004 / - 0.000 7.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 8250 8.250 +0.004 / - 0.000 7.520 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 8300 8.300 +0.004 / - 0.000 7.570 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 8500 8.500 +0.004 / - 0.000 7.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 8750 8.750 +0.004 / - 0.000 8.020 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 9000 9.000 +0.004 / - 0.000 8.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 9040 9.040 +0.004 / - 0.000 8.310 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 9500 9.500 +0.004 / - 0.000 8.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 10000 10.000 +0.004 / - 0.000 9.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 10500 10.500 +0.004 / - 0.000 9.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 11000 11.000 +0.004 / - 0.000 10.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 12000 12.000 +0.004 / - 0.000 11.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 12500 12.500 +0.004 / - 0.000 11.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 13000 13.000 +0.004 / - 0.000 12.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 13500 13.500 +0.004 / - 0.000 12.770 +0.000 / - 0.004 0.750 0.365 3/8 0.035
CTS 14000 14.000 +0.004 / - 0.000 13.270 +0.000 / - 0.004 0.750 0.365 3/8 0.035
* Caterpillar Four Piece

Part Number CAT Number O.D. Height Length
CAT 55004 8J8767 5.500 0.412 - 0.416 0.628 - 0.632
CAT 65004 8J8703 6.500 0.480 - 0.484 0.628 - 0.632
CAT 70004 8J3749 7.000 0.480 - 0.484 0.628 - 0.632

CAT 85004 3G4762 8.500 0.543 - 0.547 0.628 - 0.632
CAT 105004 3G4765 10.500 0.591 - 0.595 0.688 - 0.692
Our Caterpillar parts are not original equipment parts. Caterpillar part numbers are only provided
as a reference.
32 HITECHSEALS.COM
Imperial Seals Wipers

Wipers
D DT DS DX
Additional styles such as Seal

Guard, Trailmobile and Hyster
are available upon request.
AN K H C
Product Description
Wipers are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act as a
secondary rod seal. If contaminants were to enter a cylinder it could lead to damage of the rod and/or other sealing com-
ponents. A properly selected wiper could help reduce the need for unscheduled maintenance and even increase the time
between maintenance cycles.
It is important to select the correct style and material for an application. Our standard wiper material is urethane, however,
nitrile, hydrogenated nitrile, Viton™, PEEK, and Hytrel® wipers are available. When selecting the material for a wiper remem-
ber to consider: required abrasion resistance, elasticity, resilience, and fluid compatibility.
Part Numbers:
W __ __ - ___ ___ ___ ___ ___ ___ ___
Prefix: Profile - listed only for below profiles
D DT
AN Material - if other than Urethane
C DS
K RodRod
Diameter (Nominal)
Diameter (Nominal)
DX
H
Example: WD 1250 - 1 - 1/4” Nom. I.D., Wiper, Urethane, D Style
WD 5750DT - 5 -3/4” Nom. I.D., Wiper, Urethane, DT Style
HITECHSEALS.COM 33
Wipers Imperial Seals
DT,
D, DT,D,
DSDS
andand DX styles
DX styles
C 0.025 R Max.
Wipers
B D A
DT Wipers are a one piece snap-in type rod wiper designed for medium
duty applications. The outside lip provides improved O.D. ingression re-
sistance. The DT style wiper lip reduces apparent rod seal leakage with
equivalent ingression resistance to a sharp lip wiper.
* DT, D, DS and DX are all available in the sizes listed below. WD prefix
most commonly represents our DT style wiper.
A B C D A B C D
Groove Groove Shoulder Groove Groove Shoulder
Diameter Width Diameter Diameter Width Diameter
*Part Shaft +0.006 +0.004 +0.010 *Part Shaft +0.006 +0.004 +0.010
Number Diameter -0.000 -0.000 -0.000 Number Diameter -0.000 -0.000 -0.000
WD 0250 0.250 0.497 0.124 0.410 WD 1812 1.813 2.185 0.187 2.060
WD 0312 0.313 0.560 0.124 0.475 WD 1875 1.875 2.247 0.187 2.120
WD 0375 0.375 0.622 0.124 0.535 WD 1937 1.938 2.310 0.187 2.185
WD 0437 0.438 0.685 0.124 0.600 WD 2000 2.000 2.497 0.249 2.327
WD 0500 0.500 0.747 0.124 0.660 WD 2062 2.063 2.560 0.249 2.390
WD 0562 0.563 0.810 0.124 0.725 WD 2125 2.125 2.622 0.249 2.452
WD 0625 0.625 0.872 0.124 0.785 WD 2187 2.188 2.685 0.249 2.515
WD 0687 0.688 0.935 0.124 0.850 WD 2250 2.250 2.747 0.249 2.577
WD 0750 0.750 1.122 0.187 0.995 WD 2312 2.313 2.810 0.249 2.640
WD 0812 0.813 1.185 0.187 1.060 WD 2375 2.375 2.872 0.249 2.702
WD 0875 0.875 1.247 0.187 1.120 WD 2437 2.438 2.935 0.249 2.765
WD 0937 0.938 1.310 0.187 1.185 WD 2500 2.500 2.997 0.249 2.827
WD 1000 1.000 1.372 0.187 1.245 WD 2562 2.563 3.060 0.249 2.890
WD 1062 1.063 1.435 0.187 1.310 WD 2625 2.625 3.122 0.249 2.952
WD 1125 1.125 1.497 0.187 1.370 WD 2687 2.688 3.185 0.249 3.015
WD 1187 1.188 1.560 0.187 1.435 WD 2750 2.750 3.247 0.249 3.077
WD 1250 1.250 1.622 0.187 1.495 WD 2812 2.823 3.310 0.249 3.140
WD 1312 1.313 1.685 0.187 1.560 WD 2875 2.875 3.372 0.249 3.202
WD 1375 1.375 1.747 0.187 1.620 WD 2937 2.938 3.435 0.249 3.265
WD 1437 1.438 1.810 0.187 1.685 WD 3000 3.000 3.497 0.249 3.327
WD 1500 1.500 1.872 0.187 1.745 WD 3125 3.125 3.622 0.249 3.452
WD 1562 1.563 1.935 0.187 1.810 WD 3250 3.250 3.747 0.249 3.577
WD 1625 1.625 1.997 0.187 1.870 WD 3375 3.375 3.872 0.249 3.702
WD 1687 1.688 2.060 0.187 1.935 WD 3500 3.500 3.997 0.249 3.827
WD 1750 1.750 2.122 0.187 1.995 WD 3625 3.625 4.122 0.249 3.952
34 HITECHSEALS.COM
DT, D, DS and
DT, D, DXDX
DS and Styles
styles
Wipers
D DT DS DX
* DT, D, DS and DX are all available in the sizes listed below. WD prefix most commonly represents our
DT style wiper.
A B C D A B C D
*Part Shaft +0.006 +0.004 +0.010 *Part Shaft +0.006 +0.004 +0.010
WD 3750 3.750 4.247 0.249 4.077 WD 7250 7.250 7.997 0.374 7.743
WD 3875 3.875 4.372 0.249 4.202 WD 7500 7.500 8.247 0.374 7.993
WD 4000 4.000 4.497 0.249 4.327 WD 7750 7.750 8.497 0.374 8.243
WD 4125 4.125 4.622 0.249 4.452 WD 8000 8.000 8.747 0.374 8.493
WD 4250 4.250 4.747 0.249 4.577 WD 8250 8.125 8.997 0.374 8.743
WD 4375 4.375 4.872 0.249 4.702 WD 8500 8.500 9.247 0.374 8.993
WD 4500 4.500 5.247 0.374 4.993 WD 8750 8.750 9.497 0.374 9.243
WD 4625 4.625 5.372 0.374 5.118 WD 9000 9.000 9.747 0.374 9.493
WD 4750 4.750 5.497 0.374 5.243 WD 9250 9.250 9.997 0.374 9.743
WD 4875 4.875 5.622 0.374 5.368 WD 9500 9.500 10.247 0.374 9.993
WD 5000 5.000 5.747 0.374 5.493 WD 9750 9.750 10.497 0.374 10.243
WD 5125 5.125 5.872 0.374 5.618 WD 10000 10.000 10.997 0.499 10.659
WD 5250 5.250 5.997 0.374 5.743 WD 10250 10.250 11.247 0.499 10.909
WD 5375 5.375 6.122 0.374 5.868 WD 10500 10.500 11.497 0.499 11.159
WD 5500 5.500 6.247 0.374 5.993 WD 10750 10.750 11.747 0.499 11.409
WD 5625 5.625 6.372 0.374 6.118 WD 11000 11.000 11.997 0.499 11.659
WD 5750 5.750 6.497 0.374 6.243 WD 11250 11.250 12.247 0.499 11.909
WD 5875 5.875 6.622 0.374 6.368 WD 11500 11.500 12.497 0.499 12.159
WD 6000 6.000 6.747 0.374 6.493 WD 11750 11.750 12.747 0.499 12.409
WD 6250 6.250 6.997 0.374 6.743 WD 12000 12.000 12.997 0.499 12.659
WD 6500 6.500 7.247 0.374 6.993 WD 12500 12.500 13.497 0.499 13.159
WD 6750 6.250 7.497 0.374 7.243 WD 13000 13.000 13.997 0.499 13.659
WD 7000 7.000 7.747 0.374 7.493
HITECHSEALS.COM 35
AN
AN - -Style
Style 0.025 R
C +0.003
Max. -0.003
Wipers
B D A
AN Wipers are a light duty snap-in wiper that will retrofit into glands
prescribed in MS-3375.
A B C D A B C D
Shaft Groove Groove Shoulder Shaft Groove Groove Shoulder
Diameter Diameter Width Diameter Diameter Diameter Width Diameter
Part +0.000 +0.004 +0.003 +0.005 Part +0.000 +0.004 +0.003 +0.005
Number -0.002 -0.000 -0.000 -0.000 Number -0.002 -0.000 -0.000 -0.000
WAN 0500 0.498 0.760 0.107 0.647 WAN 2063 2.061 2.365 0.107 2.241
WAN 0562 0.560 0.823 0.107 0.710 WAN 2125 2.123 2.427 0.107 2.303
WAN 0625 0.623 0.885 0.107 0.772 WAN 2188 2.186 2.490 0.107 2.366
WAN 0688 0.684 0.948 0.107 0.834 WAN 2250 2.248 2.552 0.107 2.428
WAN 0750 0.748 1.010 0.107 0.897 WAN 2313 2.311 2.615 0.107 2.491
WAN 0812 0.810 1.084 0.107 0.960 WAN 2375 2.373 2.677 0.107 2.553
WAN 0875 0.873 1.147 0.107 1.023 WAN 2437 2.436 2.740 0.107 2.616
WAN 0937 0.935 1.209 0.107 1.085 WAN 2500 2.498 2.802 0.107 2.678
WAN 1000 0.998 1.272 0.107 1.148 WAN 2562 2.561 2.865 0.107 2.741
WAN 1062 1.060 1.334 0.107 1.210 WAN 2625 2.623 2.989 0.122 2.834
WAN 1125 1.123 1.397 0.107 1.273 WAN 2688 2.686 3.052 0.122 2.897
WAN 1187 1.185 1.459 0.107 1.335 WAN 2750 2.748 3.114 0.122 2.959
WAN 1250 1.248 1.522 0.107 1.398 WAN 2813 2.811 3.177 0.122 3.022
WAN 1312 1.310 1.614 0.107 1.480 WAN 2875 2.873 3.239 0.122 3.084
WAN 1375 1.373 1.677 0.107 1.542 WAN 3000 2.997 3.364 0.122 3.209
WAN 1437 1.435 1.739 0.107 1.605 WAN 3125 3.122 3.489 0.122 3.334
WAN 1500 1.498 1.802 0.107 1.668 WAN 3250 3.247 3.614 0.122 3.459
WAN 1563 1.561 1.865 0.107 1.731 WAN 3375 3.372 3.729 0.122 3.584
WAN 1625 1.623 1.927 0.107 1.793 WAN 3500 3.497 3.864 0.122 3.709
WAN 1687 1.686 1.990 0.107 1.856 WAN 3625 3.622 3.989 0.122 3.834
WAN 1750 1.748 2.052 0.107 1.918 WAN 3750 3.747 4.114 0.122 3.959
WAN 1812 1.811 2.115 0.107 1.981 WAN 3875 3.872 4.239 0.122 4.084
WAN 1875 1.873 2.177 0.107 2.043 WAN 4000 3.997 4.427 0.138 4.240
WAN 1938 1.936 2.240 0.107 2.106 WAN 4125 4.122 4.552 0.138 4.365
WAN 2000 1.998 2.302 0.107 2.178 WAN 4250 4.247 4.677 0.138 4.490
36 HITECHSEALS.COM
ANAN- Style
- Style
Wipers
A B C D A B C D
Shaft Groove Groove Shoulder Shaft Groove Groove Shoulder
Diameter Diameter Width Diameter Diameter Diameter Width Diameter
Part +0.000 +0.004 +0.003 +0.005 Part +0.000 +0.004 +0.003 +0.005
Number -0.002 -0.000 -0.000 -0.000 Number -0.002 -0.000 -0.000 -0.000
WAN 4375 4.372 4.802 0.138 4.615 WAN 8000 7.997 8.489 0.154 8.272
WAN 4500 4.497 4.927 0.138 4.740 WAN 8250 8.247 8.739 0.154 8.522
WAN 4625 4.622 5.052 0.138 4.865 WAN 8500 8.497 8.989 0.154 8.772
WAN 4750 4.747 5.177 0.138 4.990 WAN 8750 8.747 9.239 0.154 9.022
WAN 4875 4.872 5.302 0.138 5.115 WAN 9000 8.997 9.489 0.154 9.272
WAN 5000 4.997 5.427 0.138 5.240 WAN 9250 9.247 9.739 0.154 9.522
WAN 5125 5.122 5.552 0.138 5.365 WAN 9500 9.497 9.989 0.154 9.772
WAN 5250 5.247 5.677 0.138 5.490 WAN 9750 9.747 10.239 0.154 10.022
WAN 5375 5.372 5.802 0.138 5.615 WAN 10000 9.997 10.489 0.154 10.272
WAN 5500 5.497 5.927 0.138 5.740 WAN 10250 10.247 10.739 0.154 10.522
WAN 5625 5.622 6.114 0.154 5.896 WAN 10500 10.497 10.989 0.154 10.772
WAN 5750 5.747 6.239 0.154 6.022 WAN 10750 10.747 11.239 0.154 11.022
WAN 5875 5.872 6.364 0.154 6.146 WAN 11000 10.997 11.489 0.154 11.272
WAN 6000 5.997 6.489 0.154 6.272 WAN 11250 11.247 11.739 0.169 11.522
WAN 6250 6.247 6.739 0.154 6.522 WAN 11500 11.497 11.989 0.169 11.772
WAN 6500 6.497 6.989 0.154 6.772 WAN 11750 11.747 12.239 0.169 12.022
WAN 6750 6.747 7.239 0.154 7.022 WAN 12000 11.997 12.489 0.169 12.272
WAN 7000 6.997 7.489 0.154 7.272 WAN 12250 12.247 12.739 0.169 12.522
WAN 7250 7.247 7.739 0.154 7.522 WAN 12500 12.497 12.989 0.169 12.772
WAN 7500 7.497 7.989 0.154 7.772 WAN 12750 12.747 13.239 0.169 13.022
WAN 7750 7.747 8.239 0.154 8.022 WAN 13000 12.997 13.489 0.169 13.272
HITECHSEALS.COM 37
K - Style 0.025 R Max. C

Wipers
B D A
45 x 1/64 Chamfer
30°
K Style Wipers are a one-piece, snap-in type rod wiper, designed for light
duty applications. This style acts as a secondary rod seal.
A B C D A B C D
Part Shaft +0.005 +0.015 +0.015 Part Shaft +0.005 +0.015 +0.015
WK 0500 0.500 0.760 0.155 0.625 WK 3000 3.000 3.510 0.255 3.157
WK 0562 0.562 0.822 0.155 0.687 WK 3125 3.125 3.635 0.255 3.282
WK 0625 0.625 0.885 0.155 0.750 WK 3250 3.250 3.760 0.255 3.407
WK 0687 0.688 0.947 0.155 0.812 WK 3375 3.375 3.885 0.255 3.532
WK 0750 0.750 1.135 0.195 0.832 WK 3500 3.500 4.010 0.255 3.657
WK 0812 0.812 1.197 0.195 0.894 WK 3625 3.625 4.135 0.255 3.782
WK 0875 0.875 1.260 0.195 0.957 WK 3750 3.750 4.260 0.255 3.907
WK 0937 0.938 1.322 0.195 1.019 WK 3875 3.875 4.385 0.255 4.032
WK 1000 1.000 1.385 0.195 1.082 WK 4000 4.000 4.510 0.255 4.157
WK 1062 1.063 1.447 0.195 1.144 WK 4125 4.125 4.635 0.255 4.282
WK 1125 1.125 1.510 0.195 1.207 WK 4250 4.250 4.760 0.255 4.407
WK 1187 1.188 1.572 0.195 1.269 WK 4375 4.375 4.885 0.255 4.532
WK 1250 1.250 1.635 0.195 1.332 WK 4500 4.500 5.010 0.255 4.657
WK 1312 1.313 1.697 0.195 1.394 WK 4625 4.625 5.135 0.255 4.782
WK 1375 1.375 1.760 0.195 1.457 WK 4750 4.750 5.260 0.255 4.907
WK 1437 1.437 1.822 0.195 1.519 WK 4875 4.875 5.385 0.255 5.032
WK 1500 1.500 1.885 0.195 1.582 WK 5000 5.000 5.510 0.255 5.157
WK 1562 1.563 1.947 0.195 1.644 WK 5250 5.250 5.760 0.255 5.407
WK 1625 1.625 2.010 0.195 1.707 WK 5500 5.500 6.010 0.255 5.657
WK 1687 1.688 2.072 0.195 1.769 WK 5750 5.750 6.260 0.255 5.907
WK 1750 1.750 2.135 0.195 1.832 WK 6000 6.000 6.510 0.255 6.157
WK 1812 1.813 2.197 0.195 1.894 WK 6250 6.250 6.760 0.255 6.407
WK 1875 1.875 2.260 0.195 1.957 WK 6500 6.500 7.010 0.255 6.657
WK 1937 1.938 2.322 0.195 2.019 WK 6750 6.750 7.260 0.255 6.907
WK 2000 2.000 2.385 0.195 2.082 WK 7000 7.000 7.510 0.255 7.157
WK 2125 2.125 2.510 0.195 2.207 WK 7500 7.500 8.010 0.255 7.657
WK 2250 2.250 2.760 0.255 2.407 WK 8000 8.000 8.510 0.255 8.157
WK 2375 2.375 2.885 0.255 2.532 WK 8500 8.500 9.010 0.255 8.657
WK 2500 2.500 3.010 0.255 2.657 WK 9000 9.000 9.510 0.255 9.157
WK 2625 2.625 3.135 0.255 2.782 WK 9500 9.500 10.010 0.255 9.657
WK 2750 2.750 3.260 0.255 2.907 WK 10000 10.000 10.510 0.255 10.157
WK 2875 2.875 3.385 0.255 3.032
38 HITECHSEALS.COM
C 0.025 R Max. H -HStyle
- Style
A D B
Wipers
H Style Wipers are a one piece snap-in type rod wiper designed for light
duty applications. This style acts as a secondary rod seal.
A B C D A B C D
WH 0250 0.250 0.552 0.203 0.370 WH 1812 1.812 2.177 0.218 1.947
WH 0312 0.312 0.615 0.203 0.432 WH 1875 1.875 2.240 0.218 2.010
WH 0375 0.375 0.677 0.203 0.495 WH 1937 1.937 2.302 0.218 2.072
WH 0437 0.437 0.740 0.203 0.557 WH 2000 2.000 2.365 0.218 2.135
WH 0500 0.500 0.802 0.203 0.620 WH 2062 2.062 2.427 0.218 2.197
WH 0562 0.562 0.865 0.203 0.682 WH 2125 2.125 2.490 0.218 2.260
WH 0625 0.625 0.927 0.203 0.745 WH 2187 2.188 2.683 0.281 2.323
WH 0687 0.688 0.990 0.203 0.808 WH 2250 2.250 2.745 0.281 2.385
WH 0750 0.750 1.052 0.203 0.870 WH 2312 2.312 2.807 0.281 2.447
WH 0812 0.812 1.177 0.218 0.947 WH 2375 2.375 2.870 0.281 2.510
WH 0875 0.875 1.240 0.218 1.010 WH 2437 2.437 2.932 0.281 2.572
WH 0937 0.937 1.302 0.218 1.072 WH 2500 2.500 2.995 0.281 2.635
WH 1000 1.000 1.365 0.218 1.135 WH 2562 2.562 3.057 0.281 2.697
WH 1062 1.062 1.427 0.218 1.197 WH 2625 2.625 3.120 0.281 2.760
WH 1125 1.125 1.490 0.218 1.260 WH 2687 2.688 3.183 0.281 2.823
WH 1187 1.187 1.552 0.218 1.322 WH 2750 2.750 3.245 0.281 2.885
WH 1250 1.250 1.615 0.218 1.385 WH 2812 2.812 3.307 0.281 2.947
WH 1312 1.312 1.702 0.218 1.447 WH 2875 2.875 3.370 0.281 3.010
WH 1375 1.375 1.740 0.218 1.510 WH 2937 2.938 3.433 0.281 3.073
WH 1437 1.437 1.802 0.218 1.572 WH 3000 3.000 3.495 0.281 3.135
WH 1500 1.500 1.865 0.218 1.635 WH 3125 3.125 3.620 0.281 3.260
WH 1562 1.562 1.927 0.218 1.697 WH 3250 3.250 3.745 0.281 3.385
WH 1625 1.625 1.990 0.218 1.760 WH 3375 3.375 3.870 0.281 3.510
WH 1687 1.688 2.052 0.218 1.823 WH 3500 3.500 3.995 0.281 3.635
WH 1750 1.750 2.115 0.218 1.885 WH 3625 3.625 4.120 0.281 3.760
HITECHSEALS.COM 39
H
H --Style
Style
Wipers
A B C D A B C D
WH 3750 3.750 4.245 0.281 3.885 WH 6000 6.000 6.495 0.281 6.135
WH 3875 3.875 4.370 0.281 4.010 WH 6250 6.250 6.745 0.281 6.385
WH 4000 4.000 4.495 0.281 4.135 WH 6500 6.500 6.995 0.281 6.635
WH 4125 4.125 4.620 0.281 4.260 WH 6750 6.750 7.245 0.281 6.885
WH 4250 4.250 4.745 0.281 4.385 WH 7000 7.000 7.495 0.281 7.135
WH 4375 4.375 4.870 0.281 4.510 WH 7250 7.250 7.745 0.281 7.385
WH 4500 4.500 4.995 0.281 4.635 WH 7500 7.500 7.995 0.281 7.635
WH 4625 4.625 5.120 0.281 4.760 WH 7750 7.750 8.245 0.281 7.885
WH 4750 4.750 5.245 0.281 4.885 WH 8000 8.000 8.495 0.281 8.135
WH 4875 4.875 5.370 0.281 5.010 WH 8250 8.250 8.745 0.281 8.385
WH 5000 5.000 5.495 0.281 5.135 WH 8500 8.500 8.995 0.281 8.635
WH 5125 5.125 5.620 0.281 5.260 WH 8750 8.750 9.245 0.281 8.885
WH 5250 5.250 5.745 0.281 5.385 WH 9000 9.000 9.495 0.281 9.135
WH 5375 5.375 5.870 0.281 5.510 WH 9250 9.250 9.745 0.281 9.385
WH 5500 5.500 5.995 0.281 5.635 WH 9500 9.500 9.995 0.281 9.635
WH 5625 5.625 6.120 0.281 5.760 WH 9750 9.750 10.245 0.281 9.885
WH 5750 5.750 6.245 0.281 5.885 WH 10000 10.000 10.495 0.281 10.135
WH 5875 5.875 6.370 0.281 6.010
40 HITECHSEALS.COM
C - MetalMetal
Encased
EncasedStyle
Style
C 0.025 R Max.
Wipers
A B
Metal encased wipers are composed of a nitrile (N) or urethane (U) ele-
ment encased in a high quality steel metal retainer.
20-30° The lip is rigid enough to handle tough scraping environments such as
Slight lead dry or wet mud, and ice, yet sensitive enough to exclude fine dust and
Chamfer required moisture.
A B C A B C
Groove Groove Groove Groove
Diameter Width Diameter Width
Part Shaft +0.003 +0.015 Part Shaft +0.003 +0.015
Number Diameter -0.000 -0.000 Material Number Diameter -0.000 -0.000 Material
WC 0500 0.500 0.750 0.125 N WC 1250250 1.250 1.750 0.250 U, N
WC 05001000250 0.500 1.000 0.250 U WC 1250 1.250 1.750 0.312 U
WC 06250875 0.625 0.875 0.125 N WC 12501750312 1.250 1.750 0.312 N
WC 06250937 0.625 0.937 0.187 N WC 13751625 1.375 1.625 0.125 N
WC 0625 0.625 1.125 0.312 U WC 13751750 1.375 1.750 0.187 N
WC 0687 0.687 1.000 0.187 N WC 1375250 1.375 1.875 0.250 N
WC 07501000125 0.750 1.000 0.125 N WC 1375 1.375 1.875 0.312 U
WC 0750 0.750 1.250 0.250 U, N WC 13752000312 1.375 2.000 0.312 N
WC 07501250312 0.750 1.250 0.312 U WC 15001875187 1.500 1.875 0.187 N
WC 08751125 0.875 1.125 0.125 N WC 15001875250 1.500 1.875 0.250 N
WC 08751250 0.875 1.250 0.187 N WC 1500250 1.500 2.000 0.250 U,N
WC 0875 0.875 1.375 0.312 U WC 1500 1.500 2.000 0.312 U
WC 0937 0.937 1.187 0.125 N WC 15002125 1.500 2.125 0.312 U
WC 10001250125 1.000 1.250 0.125 N WC 1500375 1.500 2.250 0.375 U
WC 10001375 1.000 1.375 0.187 N WC 16252125250 1.625 2.125 0.250 N
WC 1000187 1.000 1.500 0.187 N WC 1625 1.625 2.125 0.312 U
WC 1000 1.000 1.500 0.312 U WC 17502125187 1.750 2.125 0.187 N
WC 1063 1.063 1.500 0.187 N WC 1750250 1.750 2.250 0.250 U, N
WC 11251500187 1.125 1.500 0.187 N WC 1750 1.750 2.250 0.312 U
WC 1125250 1.125 1.625 0.250 N WC 1750375 1.750 2.437 0.375 U
WC 1125 1.125 1.625 0.312 U WC 1875 1.875 2.375 0.312 U
WC 1187 1.187 1.625 0.250 U WC 20002375187 2.000 2.375 0.187 N
WC 12501500125 1.250 1.500 0.125 N WC 2000250 2.000 2.500 0.250 U
WC 12501690187 1.250 1.690 0.187 N WC 2000 2.000 2.500 0.312 U
HITECHSEALS.COM 41
C - Metal
Metal EncasedEncased
Style Style
Wipers
A B C A B C
Diameter Width Diameter Width
Part Shaft +0.003 +0.015 Part Shaft +0.003 +0.015
Number Diameter -0.000 -0.000 Material Number Diameter -0.000 -0.000 Material
WC 20002625 2.000 2.625 0.250 N WC 3250500 3.250 4.250 0.500 N
WC 2000375 2.000 2.687 0.375 N WC 35004000 3.500 4.000 0.312 U
WC 20002750 2.000 2.750 0.375 U WC 3500 3.500 4.125 0.312 U
WC 2125 2.125 2.625 0.312 U WC 35004250 3.500 4.250 0.250 U
WC 2250250 2.250 2.750 0.250 U WC 3500500 3.500 4.500 0.500 U
WC 22502625 2.250 2.625 0.250 N WC 35004750250 3.500 4.750 0.250 N
WC 2250 2.250 2.750 0.312 U WC 3625 3.625 4.250 0.312 U
WC 22502875 2.250 2.875 0.250 N WC 3750 3.750 4.375 0.312 U
WC 2250375 2.250 3.000 0.375 N WC 4000 4.000 4.625 0.312 U
WC 2375 2.375 2.875 0.312 U WC 40004750 4.000 4.750 0.312 U
WC 2375375 2.375 3.125 0.375 U WC 4000500 4.000 5.000 0.500 U
WC 25003000250 2.500 3.000 0.250 N WC 4250 4.250 4.875 0.312 U
WC 2500 2.500 3.000 0.312 U WC 4375312 4.375 5.000 0.312 U
WC 25003125 2.500 3.125 0.250 U, N WC 4500 4.500 5.125 0.312 U
WC 25003250250 2.500 3.250 0.250 U WC 45005250 4.500 5.250 0.312 U
WC 2625 2.625 3.125 0.250 U WC 4500500 4.500 5.500 0.500 U
WC 2750187 2.750 3.250 0.187 N WC 4750500 4.750 5.750 0.500 U
WC 2750 2.750 3.250 0.312 U WC 5000 5.000 5.750 0.312 U
WC 27503500375 2.750 3.500 0.375 U WC 52505750 5.250 5.750 0.312 U
WC 2750500 2.750 3.750 0.500 U WC 5250 5.250 5.875 0.312 U
WC 3000 3.000 3.500 0.312 U WC 55006125375 5.500 6.125 0.375 U
WC 3000375 3.000 3.750 0.375 U WC 55006250 5.500 6.250 0.312 U
WC 3000500 3.000 4.000 0.500 N WC 57506375375 5.750 6.375 0.375 U
WC 30003625250 3.000 3.625 0.250 N WC 6000 6.000 6.625 0.375 U
WC 30003750250 3.000 3.750 0.250 U WC 6000500 6.000 7.000 0.500 U
WC 32503750 3.250 3.750 0.312 U WC 6500625 6.500 7.500 0.625 U
WC 3250 3.250 3.875 0.312 U WC 6750 6.750 7.375 0.375 U
Metal encased wipers are typically stocked in nitrile (N) or urethane (U), however, additional materials and sizes are available.
42 HITECHSEALS.COM
Imperial Seals Loaded U-Cups
Loaded U-Cups
Hytrel®/Fluorotrel™ -54°C to 149°C
Loader Materials
Nitrile 70 Duro. -40°C to 120°C
Nitrile 90 Duro. -25°C to 120°C
O-Ring Loaded O-Ring Loaded Quad Loaded Quad Loaded

w/ Straight Lip w/ Beveled Lip w/ Straight Lip w/ Beveled Lip
Product Description
U-cups are one of the most popular lip seals used today. Loaded U-cups are primarily intended for dynamic reciprocating
applications. They are an excellent seal in low pressure rod or piston applications. As the system pressure increases, the
loading lip force also increases, automatically compensating for the higher pressure while maintaining a positive seal. A
variety of styles, materials, and sizes are available to suit specific requirements.
Part Numbers: * Height is only listed if the axial

___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ height is greater than the cross-
section.
C/S I.D. Height*

Prefix: Suffix:
LUC - TPU Loaded U-Cup Blank - O-Ring Loaded, Straight Lip
HNBR - Hydrogenated Nitrile/HNBR loader B - O-Ring Loaded, Beveled Lip
VUC - Viton™/Viton™ Loader Q - Quad Loaded, Straight Lip
HTL - Hytrel®/Nitrile Loader BQ - Quad Loaded, Beveled Lip
Material - if other than described by the prefix
Example: LUC 1250 1062 250 - Urethane U-Cup, Nitrile O-Ring, 0.125” C/S, 1.062” Nominal I.D. ,0.250” Height (Nominal Depth).
HITECHSEALS.COM 43
Loaded U-Cups Imperial Seals
C C
If a wear ring is used value C

Loaded U-Cups
is to the O.D. of the installed

G F E B D A wear ring.
If a wear ring is used value F

is to the I.D. of the installed
wear ring.
Piston Applications Shaft Applications

C A D B E F G
C/S Size Nom Nom Nom Groove Bore Piston Groove Shaft Throat Groove
(Width) Number I.D. O.D. Height Width Dia. Dia. Dia. Dia. Dia. Dia.
+0.010 +0.002 +0.000 +0.000 +0.000 +0.002 +0.002
Tolerance Limits
-0.000 -0.000 -0.001 -0.002 -0.001 -0.000 -0.000
1/8” 12500125 1/8 0.138
1/8 3/8 0.375 0.374 0.125 0.125 0.126 0.375
12500125250 1/4 0.275
12500187 1/8 0.138
3/16 7/16 0.437 0.436 0.187 0.187 0.188 0.437
12500187250 1/4 0.275
12500250 1/8 0.138
1/4 1/2 0.500 0.499 0.250 0.250 0.251 0.500
12500250250 1/4 0.275
12500312 1/8 0.138
5/16 9/16 0.562 0.561 0.312 0.312 0.313 0.562
12500312250 1/4 0.275
12500375 1/8 0.138
3/8 5/8 0.625 0.624 0.375 0.375 0.376 0.625
12500375250 1/4 0.275
12500437 1/8 0.138
7/16 11/16 0.687 0.686 0.437 0.437 0.438 0.687
12500437250 1/4 0.275
12500500 1/8 0.138
1/2 3/4 0.750 0.749 0.500 0.500 0.501 0.750
12500500250 1/4 0.275
12500562 1/8 0.138
9/16 13/16 0.812 0.811 0.562 0.562 0.563 0.812
12500562250 1/4 0.275
12500625 1/8 0.138
5/8 7/8 0.875 0.874 0.625 0.625 0.626 0.875
12500625250 1/4 0.275
12500687 1/8 0.138
11/16 15/16 0.937 0.936 0.687 0.687 0.688 0.937
12500687250 1/4 0.275
12500750 1/8 0.138
3/4 1 1.000 0.999 0.750 0.750 0.751 1.000
12500750250 1/4 0.275
12500812 1/8 0.138
13/16 1 - 1/16 1.062 1.061 0.812 0.812 0.813 1.062
12500812250 1/4 0.275
12500875 1/8 0.138
7/8 1 - 1/8 1.125 1.124 0.875 0.875 0.876 1.125
12500875250 1/4 0.275
12500937 1/8 0.138
15/16 1 - 3/16 1.187 1.186 0.937 0.937 0.938 1.187
12500937250 1/4 0.275
12501000 1/8 0.138
1 1 - 1/4 1.250 1.249 1.000 1.000 1.001 1.250
12501000250 1/4 0.275
12501062 1/8 0.138
1 - 1/16 1 - 5/16 1.312 1.311 1.062 1.062 1.063 1.312
12501062250 1/4 0.275
44 HITECHSEALS.COM
C A D B E F G
Loaded
Loaded U-Cups
+0.010 +0.002 +0.000 +0.000 +0.000 +0.002 +0.002
Tolerance Limits
-0.000 -0.000 -0.001 -0.002 -0.001 -0.000 -0.000
1/8” 12501125 1/8 0.138
1 - 1/8 1 - 3/8 1.375 1.374 1.125 1.125 1.126 1.375
12501125250 1/4 0.275
12501187 1/8 0.138
U-Cups
1 - 3/16 1 - 7/16 1.437 1.436 1.187 1.187 1.188 1.437
12501187250 1/4 0.275
12501250 1/8 0.138
1 - 1/4 1 - 1/2 1.500 1.499 1.250 1.250 1.251 1.500
12501250250 1/4 0.275
12501312 1/8 0.138
1 - 5/16 1 - 9/16 1.562 1.561 1.312 1.312 1.313 1.562
12501312250 1/4 0.275
12501375 1/8 0.138
1 - 3/8 1 - 5/8 1.625 1.624 1.375 1.375 1.376 1.625
12501375250 1/4 0.275
12501437 1/8 0.138
1 - 7/16 1 - 11/16 1.687 1.686 1.437 1.437 1.438 1.687
12501437250 1/4 0.275
12501500 1/8 0.138
1 - 1/2 1 - 3/4 1.750 1.749 1.500 1.500 1.501 1.750
12501500250 1/4 0.275
12501625 1/8 0.138
1 - 5/8 1 - 7/8 1.875 1.874 1.625 1.625 1.626 1.875
12501625250 1/4 0.275
12501750 1/8 0.138
1 - 3/4 2 2.000 1.999 1.750 1.750 1.751 2.000
12501750250 1/4 0.275
12501875 1/8 0.138
1 - 7/8 2 - 1/8 2.125 2.124 1.875 1.875 1.876 2.125
12501875250 1/4 0.275
12502000 1/8 0.138
2 2 - 1/4 2.250 2.249 2.000 2.000 2.001 2.250
12502000250 1/4 0.275
12502125 1/8 0.138
2 - 1/8 2 - 3/8 2.375 2.374 2.125 2.125 2.126 2.375
12502125250 1/4 0.275
12502250 1/8 0.138
2 - 1/4 2 - 1/2 2.500 2.499 2.250 2.250 2.251 2.500
12502250250 1/4 0.275
12502375 1/8 0.138
2 - 3/8 2 - 5/8 2.625 2.624 2.375 2.375 2.376 2.625
12502375250 1/4 0.275
12502500 1/8 0.138
2 - 1/2 2 - 3/4 2.750 2.749 2.500 2.500 2.501 2.750
12502500250 1/4 0.275
+0.010 +0.002 +0.000 +0.000 +0.000 +0.002 +0.002
Tolerance Limits
-0.000 -0.000 -0.002 -0.002 -0.002 -0.000 -0.000
3/16” 18700187 3/16 0.207
3/16 9/16 0.562 0.561 0.187 0.187 0.188 0.562
18700187312 5/16 0.344
18700250 3/16 0.207
1/4 5/8 0.625 0.624 0.250 0.250 0.251 0.625
18700250312 5/16 0.344
18700312 3/16 0.207
5/16 11/16 0.687 0.686 0.312 0.312 0.313. 0.687
18700312312 5/16 0.344
1870375 3/16 0.207
3/8 3/4 0.750 0.749 0.375 0.375 0.376 0.750
18700375312 5/16 0.344
18700437 3/16 0.207
7/16 13/16 0.812 0.811 0.437 0.437 0.438 0.812
18700437312 5/16 0.344
18700500 3/16 0.207
1/2 7/8 0.875 0.874 0.500 0.500 0.501 0.875
18700500312 5/16 0.344
18700562 3/16 0.207
9/16 15/16 0.937 0.936 0.562 0.562 0.563 0.937
18700562312 5/16 0.344
HITECHSEALS.COM 45

C A D B E F G
Loaded U-Cups
+0.010 +0.002 +0.000 +0.000 +0.000 +0.002 +0.002

Tolerance Limits
-0.000 -0.000 -0.002 -0.002 -0.002 -0.000 -0.000
3/16” 18700625 3/16 0.207
5/8 1 1.000 0.999 0.625 0.625 0.626 1.000
18700625312 5/16 0.344
18700687 3/16 0.207
11/16 1 - 1/16 1.062 1.061 0.687 0.687 0.688 1.062
18700687312 5/16 0.344
18700750 3/16 0.207
3/4 1 - 1/8 1.125 1.124 0.750 0.750 0.751 1.125
18700750312 5/16 0.344
18700812 3/16 0.207
13/16 1 - 3/16 1.187 1.186 0.812 0.812 0.813 1.187
18700812312 5/16 0.344
18700875 3/16 0.207
7/8 1 - 1/4 1.250 1.249 0.875 0.875 0.876 1.250
18700875312 5/16 0.344
18700937 3/16 0.207
15/16 1 - 5/16 1.312 1.311 0.937 0.937 0.938 1.312
18700937312 5/16 0.344
18701000 3/16 0.207
1 1 - 3/8 1.375 1.374 1.000 1.000 1.001 1.375
18701000312 5/16 0.344
18701062 3/16 0.207
1 - 1/16 1 - 7/16 1.437 1.436 1.062 1.062 1.063 1.437
18701062312 5/16 0.344
18701125 3/16 0.207
1 - 1/8 1 - 1/2 1.500 1.499 1.125 1.125 1.126 1.500
18701125312 5/16 0.344
18701187 3/16 0.207
1 - 3/16 1 - 9/16 1.562 1.561 1.187 1.187 1.188 1.562
18701187312 5/16 0.344
18701250 3/16 0.207
1 - 1/4 1 - 5/8 1.625 1.624 1.250 1.250 1.251 1.625
18701250312 5/16 0.344
18701312 3/16 0.207
1 - 5/16 1 -11/16 1.687 1.686 1.312 1.312 1.313 1.687
18701312312 5/16 0.344
18701375 3/16 0.207
1 - 3/8 1 - 3/4 1.750 1.749 1.375 1.375 1.376 1.750
18701375312 5/16 0.344
18701437 3/16 0.207
1 - 7/16 1 - 13/16 1.812 1.811 1.437 1.437 1.438 1.812
18701437312 5/16 0.344
18701500 3/16 0.207
1 - 1/2 1 - 7/8 1.875 1.874 1.500 1.500 1.501 1.875
18701500375 3/8 0.413
18701625 3/16 0.207
1 - 5/8 2 2.000 1.999 1.625 1.625 1.626 2.000
18701625375 3/8 0.413
18701687 3/16 0.207
1 - 11/16 2 - 1/16 2.062 2.061 1.687 1.687 1.688 2.062
18701687375 3/8 0.413
18701750 3/16 0.207
1 - 3/4 2 - 1/8 2.125 2.124 1.750 1.750 1.751 2.125
18701750375 3/8 0.413
18701875 3/16 0.207
1 - 7/8 2 - 1/4 2.250 2.249 1.875 1.875 1.876 2.250
18701875375 3/8 0.413
18702000 3/16 0.207
2 2 - 3/8 2.375 2.374 2.000 2.000 2.001 2.375
18702000375 3/8 0.413
18702125 3/16 0.207
2 - 1/8 2 - 1/2 2.500 2.499 2.125 2.125 2.126 2.500
18702125375 3/8 0.413
18702250 3/16 0.207
2 - 1/4 2 - 5/8 2.625 2.624 2.250 2.250 2.251 2.625
18702250375 3/8 0.413
18702375 3/16 0.207
2 - 3/8 2 - 3/4 2.750 2.749 2.375 2.375 2.376 2.750
18702375375 3/8 0.413
46 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.002 +0.000 +0.000 +0.000 +0.002 +0.002
Tolerance Limits
-0.000 -0.000 -0.002 -0.002 -0.002 -0.000 -0.000
3/16” 18702500 3/16 0.207
2 - 1/2 2 - 7/8 2.875 2.874 2.500 2.500 2.501 2.875
18702500375 3/8 0.413
18702625 3/16 0.207
2 - 5/8 3 3.000 2.999 2.625 2.625 2.626 3.000
18702625375 3/8 0.413
18702750 3/16 0.207
2 - 3/4 3 - 1/8 3.125 3.124 2.750 2.750 2.751 3.125
18702750375 3/8 0.413
18702875 3/16 0.207
2 - 7/8 3 - 1/4 3.250 3.249 2.875 2.875 2.876 3.250
18702875375 3/8 0.413
18703000 3/16 0.207
3 3 - 3/8 3.375 3.374 3.000 3.000 3.001 3.375
18703000375 3/8 0.413
18703125 3/16 0.207
3 - 1/8 3 - 1/2 3.500 3.499 3.125 3.125 3.126 3.500
18703125375 3/8 0.413
18703250 3/16 0.207
3 - 1/4 3 - 5/8 3.625 3.624 3.250 3.250 3.251 3.625
18703250375 3/8 0.413
18703375 3/16 0.207
3 - 3/8 3 - 3/4 3.750 3.749 3.375 3.375 3.376 3.750
18703375375 3/8 0.413
18703500 3/16 0.207
3 - 1/2 3 - 7/8 3.875 3.874 3.500 3.500 3.501 3.875
18703500375 3/8 0.413
18703625 3/16 0.207
3 - 5/8 4 4.000 3.999 3.625 3.625 3.626 4.000
18703625375 3/8 0.413
18703750 3/16 0.207
3 - 3/4 4 - 1/8 4.125 4.124 3.750 3.750 3.751 4.125
18703750375 3/8 0.413
18703875 3/16 0.207
3 - 7/8 4 - 1/4 4.250 4.249 3.875 3.875 3.876 4.250
18703875375 3/8 0.413
18704000 3/16 0.207
4 4 - 3/8 4.375 4.374 4.000 4.000 4.001 4.375
18704000375 3/8 0.413
18704125 3/16 0.207
4 - 1/8 4 - 1/2 4.500 4.499 4.125 4.125 4.126 4.500
18704125375 3/8 0.413
18704250 3/16 0.207
4 - 1/4 4 - 5/8 4.625 4.624 4.250 4.250 4.251 4.625
18704250375 3/8 0.413
18704375 3/16 0.207
4 - 3/8 4 - 3/4 4.750 4.749 4.375 4.375 4.376 4.750
18704375375 3/8 0.413
18704500 3/16 0.207
4 - 1/2 4 - 7/8 4.875 4.874 4.500 4.500 4.501 4.875
18704500375 3/8 0.413
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.003
Tolerance Limits
-0.000 -0.000 -0.002 -0.003 -0.002 -0.000 -0.000
1/4” 2500250 1/4 0.275
1/4 3/4 0.750 0.749 0.250 0.250 0.251 0.750
2500250375 3/8 0.413
2500312 1/4 0.275
5/16 13/16 0.812 0.811 0.312 0.312 0.313 0.812
2500312375 3/8 0.413
2500375 1/4 0.275
3/8 7/8 0.875 0.874 0.375 0.375 0.376 0.875
2500375375 3/8 0.413
2500437 1/4 0.275
7/16 15/16 0.937 0.936 0.437 0.437 0.438 0.937
2500437375 3/8 0.413
2500500 1/4 0.275
1/2 1 1.000 0.999 0.500 0.500 0.501 1.000
2500500375 3/8 0.413
HITECHSEALS.COM 47

C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.003

Tolerance Limits
-0.000 -0.000 -0.002 -0.003 -0.002 -0.000 -0.000
1/4” 25000562 1/4 0.275
9/16 1 - 1/16 1.062 1.061 0.562 0.562 0.563 1.062
25000562375 3/8 0.413
25000625 1/4 0.275
5/8 1 - 1/8 1.125 1.124 0.625 0.625 0.626 1.125
25000625375 3/8 0.413
25000687 1/4 0.275
11/16 1 - 3/16 1.187 1.186 0.687 0.687 0.688 1.187
25000687375 3/8 0.413
25000750 1/4 0.275
3/4 1 - 1/4 1.250 1.249 0.750 0.750 0.751 1.250
25000750375 3/8 0.413
25000812 1/4 0.275
13/16 1 - 5/16 1.312 1.311 0.812 0.812 0.813 1.312
25000812375 3/8 0.413
25000875 1/4 0.275
7/8 1 - 3/8 1.375 1.374 0.875 0.875 0.876 1.375
25000875375 3/8 0.413
25000937 1/4 0.275
15/16 1 - 7/16 1.437 1.436 0.937 0.937 0.938 1.437
25000937375 3/8 0.413
25001000 1/4 0.275
1 1 - 1/2 1.500 1.499 1.000 1.000 1.001 1.500
25001000375 3/8 0.413
25001062 1/4 0.275
1 - 1/16 1 - 9/16 1.562 1.561 1.062 1.062 1.063 1.562
25001062375 3/8 0.413
25001125 1/4 0.275
1 - 1/8 1 - 5/8 1.625 1.624 1.125 1.125 1.126 1.625
25001125375 3/8 0.413
25001187 1/4 0.275
1 - 3/16 1 - 11/16 1.687 1.686 1.187 1.187 1.188 1.687
25001187375 3/8 0.413
25001250 1/4 0.275
1 - 1/4 1 - 3/4 1.750 1.749 1.250 1.250 1.251 1.750
25001250375 3/8 0.413
25001312 1/4 0.275
1 - 5/16 1 - 13/16 1.813 1.812 1.313 1.313 1.314 1.813
25001312375 3/8 0.413
25001375 1/4 0.275
1 - 3/8 1 - 7/8 1.875 1.874 1.375 1.375 1.376 1.875
25001375375 3/8 0.413
25001437 1/4 0.275
1 - 7/16 1 - 15/16 1.937 1.936 1.437 1.437 1.438 1.937
25001437375 3/8 0.413
25001500 1/4 0.275
1 - 1/2 2 2.000 1.999 1.500 1.500 1.501 2.000
25001500375 3/8 0.413
25001625 1/4 0.275
1 - 5/8 2 - 1/8 2.125 2.124 1.625 1.625 1.626 2.125
25001625375 3/8 0.413
25001750 1/4 0.275
1 - 3/4 2 - 1/4 2.250 2.249 1.750 1.750 1.751 2.250
25001750375 3/8 0.413
25001875 1/4 0.275
1 - 7/8 2 - 3/8 2.375 2.374 1.875 1.875 1.876 2.375
25001875375 3/8 0.413
25002000 1/4 0.275
2 2 - 1/2 2.500 2.499 2.000 2.000 2.001 2.500
25002000375 3/8 0.413
25002125 1/4 0.275
2 - 1/8 2 - 5/8 2.625 2.624 2.125 2.125 2.126 2.625
25002125375 3/8 0.413
25002250 1/4 0.275
2 - 1/4 2 - 3/4 2.750 2.749 2.250 2.250 2.251 2.750
25002250375 3/8 0.413
25002375 1/4 0.275
2 - 3/8 2 - 7/8 2.875 2.874 2.375 2.375 2.376 2.875
25002375375 3/8 0.413
48 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.003
Tolerance Limits
-0.000 -0.000 -0.002 -0.003 -0.002 -0.000 -0.000
1/4” 25002500 1/4 0.275
2 - 1/2 3 3.000 2.999 2.500 2.500 2.501 3.000
25002500375 3/8 0.413
25002625 1/4 0.275
2 - 5/8 3 - 1/8 3.125 3.124 2.625 2.625 2.626 3.125
25002625375 3/8 0.413
25002750 1/4 0.275
2 - 3/4 3 - 1/4 3.250 3.249 2.750 2.750 2.751 3.250
25002750375 3/8 0.413
25002875 1/4 0.275
2 - 7/8 3 - 3/8 3.375 3.374 2.875 2.875 2.876 3.375
25002875375 3/8 0.413
25003000 1/4 0.275
3 3 - 1/2 3.500 3.499 3.000 3.000 3.001 3.500
25003000375 3/8 0.413
25003125 1/4 0.275
3 - 1/8 3 - 5/8 3.625 3.624 3.125 3.125 3.126 3.625
25003125375 3/8 0.413
25003250 1/4 0.275
3 - 1/4 3 - 3/4 3.750 3.749 3.250 3.250 3.251 3.750
25003250375 3/8 0.413
25003375 1/4 0.275
3 - 3/8 3 - 7/8 3.875 3.874 3.375 3.375 3.376 3.875
25003375375 3/8 0.413
25003500 1/4 0.275
3 - 1/2 4 4.000 3.999 3.500 3.500 3.501 4.000
25003500375 3/8 0.413
25003625 1/4 0.275
3 - 5/8 4 - 1/8 4.125 4.124 3.625 3.625 3.626 4.125
25003625375 3/8 0.413
25003750 1/4 0.275
3 - 3/4 4 - 1/4 4.250 4.249 3.750 3.750 3.751 4.250
25003750375 3/8 0.413
25004000 1/4 0.275
4 4 - 1/2 4.500 4.499 4.000 4.000 4.001 4.500
25004000562 9/16 0.619
25004125 1/4 0.275
4 - 1/8 4 - 5/8 4.625 4.624 4.125 4.125 4.126 4.625
25004125562 9/16 0.619
25004250 1/4 0.275
4 - 1/4 4 - 3/4 4.750 4.749 4.250 4.250 4.251 4.750
25004250562 9/16 0.619
25004375 1/4 0.275
4 - 3/8 4 - 7/8 4.875 4.874 4.375 4.375 4.376 4.875
25004375562 9/16 0.619
25004500 1/4 0.275
4 - 1/2 5 5.000 4.999 4.500 4.500 4.501 5.000
25004500562 9/16 0.619
25004625 1/4 0.275
4 - 5/8 5 - 1/8 5.125 5.124 4.625 4.625 4.626 5.125
25004625562 9/16 0.619
25004750 1/4 0.275
4 - 3/4 5 - 1/4 5.250 5.249 4.750 4.750 4.751 5.250
25004750562 9/16 0.619
25004875 1/4 0.275
4 - 7/8 5 - 3/8 5.375 5.374 4.875 4.875 4.876 5.375
25004875562 9/16 0.619
25005000 1/4 0.275
5 5 - 1/2 5.500 5.499 5.000 5.000 5.001 5.500
25005000562 9/16 0.619
25005125 1/4 0.275
5 - 1/8 5 - 5/8 5.625 5.624 5.125 5.125 5.126 5.625
25005125562 9/16 0.619
25005250 1/4 0.275
5 - 1/4 5 - 3/4 5.750 5.749 5.250 5.250 5.251 5.750
25005250562 9/16 0.619
25005375 1/4 0.275
5 - 3/8 5 - 7/8 5.875 5.874 5.375 5.375 5.376 5.875
25005375562 9/16 0.619
HITECHSEALS.COM 49

C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.003

Tolerance Limits
-0.000 -0.000 -0.002 -0.003 -0.002 -0.000 -0.000
1/4” 25005500 1/4 0.275
5 - 1/2 6 6.000 5.999 5.500 5.500 5.501 6.000
25005500562 9/16 0.619
25005625 1/4 0.275
5 - 5/8 6 - 1/8 6.125 6.124 5.625 5.625 5.626 6.125
25005625562 9/16 0.619
25005750 1/4 0.275
5 - 3/4 6 - 1/4 6.250 6.249 5.750 5.750 5.751 6.250
25005750562 9/16 0.619
25005875 1/4 0.275
5 - 7/8 6 - 3/8 6.375 6.374 5.875 5.875 5.876 6.375
25005875562 9/16 0.619
25006000 1/4 0.275
6 6 - 1/2 6.500 6.499 6.000 6.000 6.001 6.500
25006000562 9/16 0.619
25006250 1/4 0.275
6 - 1/4 6 - 3/4 6.750 6.749 6.250 6.250 6.251 6.750
25006250562 9/16 0.619
25006500 1/4 0.275
6 - 1/2 7 7.000 6.999 6.500 6.500 6.501 7.000
25006500562 9/16 0.619
25006750 1/4 0.275
6 - 3/4 7 - 1/4 7.250 7.249 6.750 6.750 6.751 7.250
25006750562 9/16 0.619
25007000 1/4 0.275
7 7 - 1/2 7.500 7.499 7.000 7.000 7.001 7.500
25007000562 9/16 0.619
25007250 1/4 0.275
7 - 1/4 7 - 3/4 7.750 7.749 7.250 7.250 7.251 7.750
25007250562 9/16 0.619
25007500 1/4 0.275
7 - 1/2 8 8.000 7.999 7.500 7.500 7.501 8.000
25007500562 9/16 0.619
25007750 1/4 0.275
7 - 3/4 8 - 1/4 8.250 8.249 7.750 7.750 7.751 8.250
25007750562 9/16 0.619
25008000 1/4 0.275
8 8 - 1/2 8.500 8.499 8.000 8.000 8.001 8.500
25008000562 9/16 0.619
25008250 1/4 0.275
8 - 1/4 8 - 3/4 8.750 8.749 8.250 8.250 8.251 8.750
25008250562 9/16 0.619
25008500 1/4 0.275
8 - 1/2 9 9.000 8.999 8.500 8.500 8.501 9.000
25008500562 9/16 0.619
25008750 1/4 0.275
8 - 3/4 9 - 1/4 9.250 9.249 8.750 8.750 8.751 9.250
25008750562 9/16 0.619
25009000 1/4 0.275
9 9 - 1/2 9.500 9.499 9.000 9.000 9.001 9.500
25009000562 9/16 0.619
25009250 1/4 0.275
9 - 1/4 9 - 3/4 9.750 9.749 9.250 9.250 9.251 9.750
25009250562 9/16 0.619
25009500 1/4 0.275
9 - 1/2 10 10.000 9.999 9.500 9.500 9.501 10.000
25009500562 9/16 0.619
25009750 1/4 0.275
9 - 3/4 10 - 1/4 10.250 10.249 9.750 9.750 9.751 10.250
25009750562 9/16 0.619
250010000 1/4 0.275
10 10 - 1/2 10.500 10.499 10.000 10.000 10.001 10.500
250010000562 9/16 0.619
50 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.004
Tolerance Limits
-0.000 -0.000 -0.002 -0.004 -0.002 -0.000 -0.000
5/16” 31200375 5/16 0.344
3/8 1 1.000 0.998 0.375 0.375 0.377 1.000
31200375500 1/2 0.550
31200437 5/16 0.344
7/16 1 - 1/16 1.062 1.060 0.437 0.437 0.439 1.062
31200437500 1/2 0.550
31200500 5/16 0.344
1/2 1 - 1/8 1.125 1.123 0.500 0.500 0.502 1.125
31200500500 1/2 0.550
31200562 5/16 0.344
9/16 1 - 3/16 1.187 1.185 0.562 0.562 0.564 1.187
31200562500 1/2 0.550
31200625 5/16 0.344
5/8 1 - 1/4 1.250 1.248 0.625 0.625 0.627 1.250
31200625500 1/2 0.550
31200687 5/16 0.344
11/16 1 - 5/16 1.312 1.310 0.687 0.687 0.689 1.312
31200687500 1/2 0.550
31200750 5/16 0.344
3/4 1 - 3/8 1.375 1.373 0.750 0.750 0.752 1.375
31200750500 1/2 0.550
31200812 5/16 0.344
13/16 1 - 7/16 1.437 1.435 0.812 0.812 0.814 1.437
31200812500 1/2 0.550
31200875 5/16 0.344
7/8 1 - 1/2 1.500 1.498 0.875 0.875 0.877 1.500
31200875500 1/2 0.550
31200937 5/16 0.344
15/16 1 - 9/16 1.562 1.560 0.937 0.937 0.939 1.562
31200937500 1/2 0.550
31201000 5/16 0.344
1 1 - 5/8 1.625 1.623 1.000 1.000 1.002 1.625
31201000500 1/2 0.550
31201062 5/16 0.344
1 - 1/16 1 -11/16 1.687 1.685 1.062 1.062 1.064 1.687
31201062500 1/2 0.550
31201125 5/16 0.344
1 - 1/8 1 - 3/4 1.750 1.748 1.125 1.125 1.127 1.750
31201125500 1/2 0.550
31201375 5/16 0.344
1 - 3/16 1 -13/16 1.812 1.810 1.187 1.187 1.189 1.812
31201375500 1/2 0.550
31201250 5/16 0.344
1 - 1/4 1 - 7/8 1.875 1.873 1.250 1.250 1.252 1.875
31201250500 1/2 0.550
31201312 5/16 0.344
1 - 5/16 1 -15/16 1.937 1.935 1.312 1.312 1.314 1.937
31201312500 1/2 0.550
31201375 5/16 0.344
1 - 3/8 2 2.000 1.998 1.375 1.375 1.377 2.000
31201375500 1/2 0.550
31201437 5/16 0.344
1 - 7/16 2 - 1/16 2.062 2.060 1.437 1.437 1.439 2.062
31201437500 1/2 0.550
31201500 5/16 0.344
1 - 1/2 2 - 1/8 2.125 2.123 1.500 1.500 1.502 2.125
31201500500 1/2 0.550
HITECHSEALS.COM 51

C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.004

Tolerance Limits
-0.000 -0.000 -0.002 -0.004 -0.002 -0.000 -0.000
5/16” 31201625 5/16 0.344
1 - 5/8 2 - 1/4 2.250 2.248 1.625 1.625 1.627 2.250
31201625500 1/2 0.550
31201750 5/16 0.344
1 - 3/4 2 - 3/8 2.375 2.373 1.750 1.750 1.752 2.375
31201750500 1/2 0.550
31201875 5/16 0.344
1 - 7/8 2 - 1/2 2.500 2.498 1.875 1.875 1.877 2.500
31201875500 1/2 0.550
31202000 5/16 0.344
2 2 - 5/8 2.625 2.623 2.000 2.000 2.002 2.625
31202000500 1/2 0.550
31202125 5/16 0.344
2 - 1/8 2 - 3/4 2.750 2.748 2.125 2.125 2.127 2.750
31202125500 1/2 0.550
31202250 5/16 0.344
2 - 1/4 2 - 7/8 2.875 2.873 2.250 2.250 2.252 2.875
31202250500 1/2 0.550
31202375 5/16 0.344
2 - 3/8 3 3.000 2.998 2.375 2.375 2.377 3.000
31202375500 1/2 0.550
31202500 5/16 0.344
2 - 1/2 3 - 1/8 3.125 3.123 2.500 2.500 2.502 3.125
31202500500 1/2 0.550
31202625 5/16 0.344
2 - 5/8 3 - 1/4 3.250 3.248 2.625 2.625 2.627 3.250
31202625500 1/2 0.550
31202750 5/16 0.344
2 - 3/4 3 - 3/8 3.375 3.373 2.750 2.750 2.752 3.375
31202750500 1/2 0.550
31202875 5/16 0.344
2 - 7/8 3 - 1/2 3.500 3.498 2.875 2.875 2.877 3.500
31202875500 1/2 0.550
31203000 5/16 0.344
3 3 - 5/8 3.625 3.623 3.000 3.000 3.002 3.625
31203000500 1/2 0.550
31203125 5/16 0.344
3 - 1/8 3 - 3/4 3.750 3.748 3.125 3.125 3.127 3.750
31203125500 1/2 0.550
31203250 5/16 0.344
3 - 1/4 3 - 7/8 3.875 3.873 3.250 3.250 3.252 3.875
31203250500 1/2 0.550
31203375 5/16 0.344
3 - 3/8 4 4.000 3.998 3.375 3.375 3.377 4.000
31203375500 1/2 0.550
31203500 5/16 0.344
3 - 1/2 4 - 1/8 4.125 4.123 3.500 3.500 3.502 4.125
31203500500 1/2 0.550
31203625 5/16 0.344
3 - 5/8 4 - 1/4 4.250 4.248 3.625 3.625 3.627 4.250
31203625500 1/2 0.550
31203750 5/16 0.344
3 - 3/4 4 - 3/8 4.375 4.373 3.750 3.750 3.752 4.375
31203750500 1/2 0.550
31203875 5/16 0.344
3 - 7/8 4 - 1/2 4.500 4.498 3.875 3.875 3.877 4.500
31203875500 1/2 0.550
31204000 5/16 0.344
4 4 - 5/8 4.625 4.623 4.000 4.000 4.002 4.625
31204000562 9/16 0.619
31204125 5/16 0.344
4 - 1/8 4 - 3/4 4.750 4.748 4.125 4.125 4.127 4.750
31204125562 9/16 0.619
31204250 5/16 0.344
4 - 1/4 4 - 7/8 4.875 4.873 4.250 4.250 4.252 4.875
31204250562 9/16 0.619
31204375 5/16 0.344
4 - 3/8 5 5.000 4.998 4.375 4.375 4.377 5.000
31204375562 9/16 0.619
52 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.004
Tolerance Limits
-0.000 -0.000 -0.002 -0.004 -0.002 -0.000 -0.000
5/16” 31204500 5/16 0.344
4 - 1/2 5 - 1/8 5.125 5.123 4.500 4.500 4.502 5.125
31204500625 5/8 0.688
31204625 5/16 0.344
4 - 5/8 5 - 1/4 5.250 5.248 4.625 4.625 4.627 5.250
31204625625 5/8 0.688
31204750 5/16 0.344
4 - 3/4 5 - 3/8 5.375 5.373 4.750 4.750 4.752 5.375
31204750625 5/8 0.688
31204875 5/16 0.344
4 - 7/8 5 - 1/2 5.500 5.498 4.875 4.875 4.877 5.500
31204875625 5/8 0.688
31205000 5/16 0.344
5 5 - 5/8 5.625 5.623 5.000 5.000 5.002 5.625
31205000625 5/8 0.688
31205125 5/16 0.344
5 - 1/8 5 - 3/4 5.750 5.748 5.125 5.125 5.127 5.750
31205125625 5/8 0.688
31205250 5/16 0.344
5 - 1/4 5 - 7/8 5.875 5.873 5.250 5.250 5.252 5.875
31205250625 5/8 0.688
31205375 5/16 0.344
5 - 3/8 6 6.000 5.998 5.375 5.375 5.377 6.000
31205375625 5/8 0.688
31205500 5/16 0.344
5 - 1/2 6 - 1/8 6.125 6.123 5.500 5.500 5.502 6.125
31205500625 5/8 0.688
31205625 5/16 0.344
5 - 5/8 6 - 1/4 6.250 6.248 5.625 5.625 5.627 6.250
31205625625 5/8 0.688
31205750 5/16 0.344
5 - 3/4 6 - 3/8 6.375 6.373 5.750 5.750 5.752 6.375
31205750625 5/8 0.688
31205875 5/16 0.344
5 - 7/8 6 - 1/2 6.500 6.498 5.875 5.875 5.877 6.500
31205875625 5/8 0.688
31206000 5/16 0.344
6 6 - 5/8 6.625 6.623 6.000 6.000 6.002 6.625
31206000625 5/8 0.688
31206125 5/16 0.344
6 - 1/8 6 - 3/4 6.750 6.748 6.125 6.125 6.127 6.750
31206125625 5/8 0.688
31206250 5/16 0.344
6 - 1/4 6 - 7/8 6.875 6.873 6.250 6.250 6.252 6.875
31206250625 5/8 0.688
31206375 5/16 0.344
6 - 3/8 7 7.000 6.998 6.375 6.375 6.377 7.000
31206375625 5/8 0.688
31206500 5/16 0.344
6 - 1/2 7 - 1/8 7.125 7.123 6.500 6.500 6.502 7.125
31206500625 5/8 0.688
31206625 5/16 0.344
6 - 5/8 7 - 1/4 7.250 7.248 6.625 6.625 6.627 7.250
31206625625 5/8 0.688
31206750 5/16 0.344
6 - 3/4 7 - 3/8 7.375 7.373 6.750 6.750 6.752 7.375
31206750625 5/8 0.688
31206875 5/16 0.344
6 - 7/8 7 - 1/2 7.500 7.498 6.875 6.875 6.877 7.500
31206875625 5/8 0.688
31207000 5/16 0.344
7 7 - 5/8 7.625 7.623 7.000 7.000 7.002 7.625
31207000625 5/8 0.688
31207125 5/16 0.344
7 - 1/8 7 - 3/4 7.750 7.748 7.125 7.125 7.127 7.750
31207125625 5/8 0.688
HITECHSEALS.COM 53

C A D B E F G
Loaded U-Cups
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.004

Tolerance Limits
-0.000 -0.000 -0.002 -0.004 -0.002 -0.000 -0.000
5/16” 31207250 5/16 0.344
7 - 1/4 7 - 7/8 7.875 7.873 7.250 7.250 7.252 7.875
31207250625 5/8 0.688
31207375 5/16 0.344
7 - 3/8 8 8.000 7.998 7.375 7.375 7.377 8.000
31207375625 5/8 0.688
+0.010 +0.004 +0.000 +0.000 +0.000 +0.004 +0.005
Tolerance Limits
-0.000 -0.000 -0.002 -0.005 -0.002 -0.000 -0.000
3/8” 37500500 3/8 0.413
1/2 1 - 1/4 1.250 1.248 0.500 0.500 0.502 1.250
37500500625 5/8 0.688
37500562 3/8 0.413
9/16 1 - 5/16 1.312 1.310 0.562 0.562 0.564 1.312
37500562625 5/8 0.688
37500625 3/8 0.413
5/8 1 - 3/8 1.375 1.373 0.625 0.625 0.627 1.375
37500625625 5/8 0.688
37500687 3/8 0.413
11/16 1 - 7/16 1.437 1.435 0.687 0.687 0.689 1.437
37500687625 5/8 0.688
37500750 3/8 0.413
3/4 1 - 1/2 1.500 1.498 0.750 0.750 0.752 1.500
37500750625 5/8 0.688
37500812 3/8 0.413
13/16 1 - 9/16 1.562 1.560 0.812 0.812 0.814 1.562
37500812625 5/8 0.688
37500875 3/8 0.413
7/8 1 - 5/8 1.625 1.623 0.875 0.875 0.877 1.625
37500875625 5/8 0.688
37500937 3/8 0.413
15/16 1 - 11/16 1.687 1.685 0.937 0.937 0.939 1.687
37500937625 5/8 0.688
37501000 3/8 0.413
1 1 - 3/4 1.750 1.748 1.000 1.000 1.002 1.750
37501000625 5/8 0.688
37501062 3/8 0.413
1 - 1/16 1 - 13/16 1.812 1.810 1.062 1.062 1.064 1.812
37501062625 5/8 0.688
37501125 3/8 0.413
1 - 1/8 1 - 7/8 1.875 1.873 1.125 1.125 1.127 1.875
37501125625 5/8 0.688
37501187 3/8 0.413
1 - 3/16 1 - 15/16 1.937 1.935 1.187 1.187 1.189 1.937
37501187625 5/8 0.688
37501250 3/8 0.413
1 - 1/4 2 2.000 1.998 1.250 1.250 1.252 2.000
37501250625 5/8 0.688
37501312 3/8 0.413
1 - 5/16 2 - 1/16 2.062 2.060 1.312 1.312 1.314 2.062
37501312625 5/8 0.688
37501375 3/8 0.413
1 - 3/8 2 - 1/8 2.125 2.123 1.375 1.375 1.377 2.125
37501375625 5/8 0.688
37501437 3/8 0.413
1 - 7/16 2 - 3/16 2.187 2.185 1.437 1.437 1.439 2.187
37501437625 5/8 0.688
37501500 3/8 0.413
1 - 1/2 2 - 1/4 2.250 2.248 1.500 1.500 1.502 2.250
37501500625 5/8 0.688
37501625 3/8 0.413
1 - 5/8 2 - 3/8 2.375 2.373 1.625 1.625 1.627 2.375
37501625625 5/8 0.688
37501750 3/8 0.413
1 - 3/4 2 - 1/2 2.500 2.498 1.750 1.750 1.752 2.500
37501750625 5/8 0.688
37501875 3/8 0.413
1 - 7/8 2 - 5/8 2.625 2.623 1.875 1.875 1.877 2.625
37501875625 5/8 0.688
54 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.004 +0.000 +0.000 +0.000 +0.004 +0.005
Tolerance Limits
-0.000 -0.000 -0.002 -0.005 -0.002 -0.000 -0.000
3/8” 37502000 3/8 0.413
2 2 - 3/4 2.750 2.748 2.000 2.000 2.002 2.750
37502000625 5/8 0.688
37502125 3/8 0.413
2 - 1/8 2 - 7/8 2.875 2.873 2.125 2.125 2.127 2.875
37502125625 5/8 0.688
37502250 3/8 0.413
2 - 1/4 3 3.000 2.998 2.250 2.250 2.252 3.000
37502250625 5/8 0.688
37502375 3/8 0.413
2 - 3/8 3 - 1/8 3.125 3.123 2.375 2.375 2.377 3.125
375023753625 5/8 0.688
37502500 3/8 0.413
2 - 1/2 3 - 1/4 3.250 3.248 2.500 2.500 2.502 3.250
37502500625 5/8 0.688
37502625 3/8 0.413
2 - 5/8 3 - 3/8 3.375 3.373 2.625 2.625 2.627 3.375
37502625625 5/8 0.688
37502750 3/8 0.413
2 - 3/4 3 - 1/2 3.500 3.498 2.750 2.750 2.752 3.500
37502750625 5/8 0.688
37502875 3/8 0.413
2 - 7/8 3 - 5/8 3.625 3.623 2.875 2.875 2.877 3.625
37502875625 5/8 0.688
37503000 3/8 0.413
3 3 - 3/4 3.750 3.748 3.000 3.000 3.002 3.750
37503000625 5/8 0.688
37503125 3/8 0.413
3 - 1/8 3 - 7/8 3.875 3.873 3.125 3.125 3.127 3.875
37503125625 5/8 0.688
37503250 3/8 0.413
3 - 1/4 4 4.000 3.998 3.250 3.250 3.252 4.000
37503250625 5/8 0.688
37503375 3/8 0.413
3 - 3/8 4 - 1/8 4.125 4.123 3.375 3.375 3.377 4.125
37503375625 5/8 0.688
37503500 3/8 0.413
3 - 1/2 4 - 1/4 4.250 4.248 3.500 3.500 3.502 4.250
37503500625 5/8 0.688
37503625 3/8 0.413
3 - 5/8 4 - 3/8 4.375 4.373 3.625 3.625 3.627 4.375
37503625625 5/8 0.688
37503750 3/8 0.413
3 - 3/4 4 - 1/2 4.500 4.498 3.750 3.750 3.752 4.500
37503750625 5/8 0.688
37503875 3/8 0.413
3 - 7/8 4 - 5/8 4.625 4.623 3.875 3.875 3.877 4.625
37503875625 5/8 0.688
37504000 3/8 0.413
4 4 - 3/4 4.750 4.748 4.000 4.000 4.002 4.750
37504000625 5/8 0.688
37504125 3/8 0.413
4 - 1/8 4 - 7/8 4.875 4.873 4.125 4.125 4.127 4.875
37504125625 5/8 0.688
37504250 3/8 0.413
4 - 1/4 5 5.000 4.998 4.250 4.250 4.252 5.000
37504250625 5/8 0.688
37504375 3/8 0.413
4 - 3/8 5 - 1/8 5.125 5.123 4.375 4.375 4.377 5.125
37504375625 5/8 0.688
37504500 3/8 0.413
4 - 1/2 5 - 1/4 5.250 5.248 4.500 4.500 4.502 5.250
37504500625 5/8 0.688
37504625 3/8 0.413
4 - 5/8 5 - 3/8 5.375 5.373 4.625 4.625 4.627 5.375
37504625625 5/8 0.688
37504750 3/8 0.413
4 - 3/4 5 - 1/2 5.500 5.498 4.750 4.750 4.752 5.500
37504750625 5/8 0.688
HITECHSEALS.COM 55

C A D B E F G
Loaded U-Cups
Tolerance Limits +0.010 +0.004 +0.000 +0.000 +0.000 +0.004 +0.005

-0.000 -0.000 -0.002 -0.005 -0.002 -0.000 -0.000
3/8” 37504875 3/8 0.413
4 -7/8 5 - 5/8 5.625 5.623 4.875 4.875 4.877 5.625
3750487625 5/8 0.688
3705000 3/8 0.413
5 5 - 3/4 5.750 5.748 5.000 5.000 5.002 5.750
3750000625 5/8 0.688
37505125 3/8 0.413
5 - 1/8 5 - 7/8 5.875 5.873 5.125 5.125 5.127 5.875
37505125625 5/8 0.688
37505250 3/8 0.413
5 - 1/4 6 6.000 5.998 5.250 5.250 5.252 6.000
37505250625 5/8 0.688
37505375 3/8 0.413
5 - 3/8 6 - 1/8 6.125 6.123 5.375 5.375 5.377 6.125
37505375625 5/8 0.688
37505500 3/8 0.413
5 - 1/2 6 - 1/4 6.250 6.248 5.500 5.500 5.502 6.250
37505500625 5/8 0.688
37505625 3/8 0.413
5 - 5/8 6 - 3/8 6.375 6.373 5.625 5.625 5.627 6.375
37505625625 5/8 0.688
37505750 3/8 0.413
5 - 3/4 6 - 1/2 6.500 6.498 5.750 5.750 5.752 6.500
37505750625 5/8 0.688
37505875 3/8 0.413
5 - 7/8 6 - 5/8 6.625 6.623 5.875 5.875 5.877 6.625
37505875625 5/8 0.688
37506000 3/8 0.413
6 6 - 3/4 6.750 6.748 6.000 6.000 6.002 6.750
37506000625 5/8 0.688
37506250 3/8 0.413
6 - 1/4 7 7.000 6.998 6.250 6.250 6.252 7.000
37506250625 5/8 0.688
37506500 3/8 0.413
6 - 1/2 7 - 1/4 7.250 7.248 6.500 6.500 6.502 7.250
37506500625 5/8 0.688
37506750 3/8 0.413
6 - 3/4 7 - 1/2 7.500 7.498 6.750 6.750 6.752 7.500
37506750625 5/8 0.688
37507000 3/8 0.413
7 7 - 3/4 7.750 7.748 7.000 7.000 7.002 7.750
37507000625 5/8 0.688
37507250 3/8 0.413
7 - 1/4 8 8.000 7.998 7.250 7.250 7.252 8.000
37507250625 5/8 0.688
37507500 3/8 0.413
7 - 1/2 8 - 1/4 8.250 8.248 7.500 7.500 7.502 8.250
37507500625 5/8 0.688
37507750 3/8 0.413
7 - 3/4 8 - 1/2 8.500 8.498 7.750 7.750 7.752 8.500
37507750625 5/8 0.688
37508000 3/8 0.413
8 8 - 3/4 8.750 8.748 8.000 8.000 8.002 8.750
37508000625 5/8 0.688
3750 8250 3/8 0.413
8 - 1/4 9 9.000 8.998 8.250 8.250 8.252 9.000
37508250625 5/8 0.688
37508500 3/8 0.413
8 - 1/2 9 - 1/4 9.250 9.248 8.500 8.500 8.502 9.250
37508500625 5/8 0.688
37508750 3/8 0.413
8 - 3/4 9 - 1/2 9.500 9.498 8.750 8.750 8.752 9.500
37508750625 5/8 0.688
37509000 3/8 0.413
9 9 - 3/4 9.750 9.748 9.000 9.000 9.002 9.750
37509000625 5/8 0.688
37509250 3/8 0.413
9 - 1/4 10 10.000 9.998 9.250 9.250 9.252 10.000
37509250625 5/8 0.688
56 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.004 +0.000 +0.000 +0.000 +0.004 +0.005
Tolerance Limits
-0.000 -0.000 -0.002 -0.005 -0.002 -0.000 -0.000
3/8” 37509500 3/8 0.413
9 - 1/2 10 - 1/4 10.250 10.248 9.500 9.500 9.502 10.250
37509500625 5/8 0.688
37509750 3/8 0.413
9 - 3/4 10 - 1/2 10.500 10.498 9.750 9.750 9.752 10.500
37509750625 5/8 0.688
375010000 3/8 0.413
10 10 - 3/4 10.750 10.748 10.000 10.000 10.002 10.750
375010000625 5/8 0.688
375010250 3/8 0.413
10 - 1/4 11 11.000 10.998 10.250 10.250 10.252 11.000
375010250625 5/8 0.688
375010500 3/8 0.413
10 - 1/2 11 - 1/4 11.250 11.248 10.500 10.500 10.502 11.250
375010500625 5/8 0.688
375010750 3/8 0.413
10 - 3/4 11 - 1/2 11.500 11.498 10.750 10.750 10.752 11.500
375010750625 5/8 0.688
375011000 3/8 0.413
11 11 - 3/4 11.750 11.748 11.000 11.000 11.002 11.750
375011000625 5/8 0.688
375011250 3/8 0.413
11 - 1/4 12 12.000 11.998 11.250 11.250 11.252 12.000
375011250625 5/8 0.688
375011500 3/8 0.413
11 - 1/2 12 - 1/4 12.250 12.248 11.500 11.500 11.502 12.250
375011500625 5/8 0.688
375011750 3/8 0.413
11 - 3/4 12 - 1/2 12.500 12.498 11.750 11.750 11.752 12.500
375011750625 5/8 0.688
375012000 3/8 0.413
12 12 - 3/4 12.750 12.748 12.000 12.000 12.002 12.750
375012000625 5/8 0.688
+0.010 +0.005 +0.000 +0.000 +0.000 +0.005 +0.007
Tolerance Limits
-0.000 -0.000 -0.003 -0.007 -0.003 -0.000 -0.000
1/2” 50001000 1/2 0.550
1 2 2.000 1.998 1.000 1.000 1.002 2.000
50001000750 3/4 0.825
50001250 1/2 0.550
1 - 1/4 2 - 1/4 2.250 2.248 1.250 1.250 1.252 2.250
50001250750 3/4 0.825
50001375 1/2 0.550
1 - 3/8 2 - 3/8 2.375 2.373 1.375 1.375 1.377 2.375
50001375750 3/4 0.825
50001500 1/2 0.550
1 - 1/2 2 - 1/2 2.500 2.498 1.500 1.500 1.502 2.500
50001500750 3/4 0.825
50001750 1/2 0.550
1 - 3/4 2 - 3/4 2.750 2.748 1.750 1.750 1.752 2.750
50001750750 3/4 0.825
50002000 1/2 0.550
2 3 3.000 2.998 2.000 2.000 2.002 3.000
50002000750 3/4 0.825
50002250 1/2 0.550
2 - 1/4 3 - 1/4 3.250 3.248 2.250 2.250 2.252 3.250
50002250750 3/4 0.825
50002375 1/2 0.550
2 - 3/8 3 - 3/8 3.375 3.373 2.375 2.375 2.377 3.375
50002375750 3/4 0.825
50002500 1/2 0.550
2 - 1/2 3 - 1/2 3.500 3.498 2.500 2.500 2.502 3.500
50002500750 3/4 0.825
50002750 1/2 0.550
2 - 3/4 3 - 3/4 3.750 3.748 2.750 2.750 2.752 3.750
50002750750 3/4 0.825
50003000 1/2 0.550
3 4 4.000 3.998 3.000 3.000 3.002 4.000
50003000750 3/4 0.825
HITECHSEALS.COM 57

C A D B E F G
Loaded U-Cups
+0.010 +0.005 +0.000 +0.000 +0.000 +0.005 +0.007

Tolerance Limits
-0.000 -0.000 -0.003 -0.007 -0.003 -0.000 -0.000
1/2” 50003250 1/2 0.550
3 - 1/4 4 - 1/4 4.250 4.248 3.250 3.250 3.252 4.250
50003250750 3/4 0.825
50003500 1/2 0.550
3 - 1/2 4 - 1/2 4.500 4.498 3.500 3.500 3.502 4.500
50003500750 3/4 0.825
50003750 1/2 0.550
3 - 3/4 4 - 3/4 4.750 4.748 3.750 3.750 3.752 4.750
50003750750 3/4 0.825
50004000 1/2 0.550
4 5 5.000 4.998 4.000 4.000 4.002 5.000
50004000750 3/4 0.825
50004250 1/2 0.550
4 - 1/4 5 - 1/4 5.250 5.248 4.250 4.250 4.252 5.250
50004250750 3/4 0.825
50004375 1/2 0.550
4 - 3/8 5 - 3/8 5.375 5.373 4.375 4.375 4.377 5.375
50004375750 3/4 0.825
50004500 1/2 0.550
4 - 1/2 5 - 1/2 5.500 5.498 4.500 4.500 4.502 5.500
50004500750 3/4 0.825
50004750 1/2 0.550
4 - 3/4 5 - 3/4 5.750 5.748 4.750 4.750 4.752 5.750
50004750750 3/4 0.825
50005000 1/2 0.550
5 6 6.000 5.998 5.000 5.000 5.002 6.000
50005000750 3/4 0.825
50005250 1/2 0.550
5 - 1/4 6 - 1/4 6.250 6.248 5.250 5.250 5.252 6.250
50005250750 3/4 0.825
50005375 1/2 0.550
5 - 3/8 6 - 3/8 6.375 6.373 5.375 5.375 5.377 6.375
50005375750 3/4 0.825
50005500 1/2 0.550
5 - 1/2 6 - 1/2 6.500 6.498 5.500 5.500 5.502 6.500
50005500750 3/4 0.825
50005750 1/2 0.550
5 - 3/4 6 - 3/4 6.750 6.748 5.750 5.750 5.752 6.750
50005750750 3/4 0.825
50006000 1/2 0.550
6 7 7.000 6.998 6.000 6.000 6.002 7.000
50006000750 3/4 0.825
50006250 1/2 0.550
6 - 1/4 7 - 1/4 7.250 7.248 6.250 6.250 6.252 7.250
50006250750 3/4 0.825
50006500 1/2 0.550
6 - 1/2 7 - 1/2 7.500 7.498 6.500 6.500 6.502 7.500
50006500750 3/4 0.825
50006750 1/2 0.550
6 - 3/4 7 - 3/4 7.750 7.748 6.750 6.750 6.752 7.750
50006750750 3/4 0.825
50007000 1/2 0.550
7 8 8.000 7.998 7.000 7.000 7.002 8.000
50007000750 3/4 0.825
50007250 1/2 0.550
7 - 1/4 8 - 1/4 8.250 8.248 7.250 7.250 7.252 8.250
50007250750 3/4 0.825
50007500 1/2 0.550
7 - 1/2 8 - 1/2 8.500 8.498 7.500 7.500 7.502 8.500
50007500750 3/4 0.825
50007750 1/2 0.550
7- 3/4 8 - 3/4 8.750 8.748 7.750 7.750 7.752 8.750
50007750750 3/4 0.825
50008000 1/2 0.550
8 9 9.000 8.998 8.000 8.000 8.002 9.000
50008000750 3/4 0.825
50008250 1/2 0.550
8 - 1/4 9 -1/4 9.250 9.248 8.250 8.250 8.252 9.250
50008250750 3/4 0.825
58 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.005 +0.000 +0.000 +0.000 +0.005 +0.007
Tolerance Limits
-0.000 -0.000 -0.003 -0.007 -0.003 -0.000 -0.000
1/2” 50008500 1/2 0.550
8 - 1/2 9 - 1/2 9.500 9.498 8.500 8.500 8.502 9.500
50008500750 3/4 0.825
50008750 1/2 0.550
8 - 3/4 9 - 3/4 9.750 9.748 8.750 8.750 8.752 9.750
50008750750 3/4 0.825
50009000 1/2 0.550
9 10 10.000 9.998 9.000 9.000 9.002 10.000
50009000750 3/4 0.825
50009250 1/2 0.550
9 - 1/4 10 - 1/4 10.250 10.248 9.250 9.250 9.252 10.250
50009250750 3/4 0.825
50009500 1/2 0.550
9 - 1/2 10 - 1/2 10.500 10.498 9.500 9.500 9.502 10.500
50009500750 3/4 0.825
50009750 1/2 0.550
9 - 3/4 10 - 3/4 10.750 10.748 9.750 9.750 9.752 10.750
50009750750 3/4 0.825
500010000 1/2 0.550
10 11 11.000 10.998 10.000 10.000 10.002 11.000
500010000750 3/4 0.825
500010500 1/2 0.550
10 - 1/2 11 - 1/2 11.500 11.498 10.500 10.500 10.502 11.500
500010500750 3/4 0.825
500011000 1/2 0.550
11 12 12.000 11.998 11.000 11.000 11.002 12.000
500011000750 3/4 0.825
500011500 1/2 0.550
11 - 1/2 12 - 1/2 12.500 12.498 11.500 11.500 11.502 12.500
500011500750 3/4 0.825
500012000 1/2 0.550
12 13 13.000 12.998 12.000 12.000 12.002 13.000
500012000750 3/4 0.825
500012500 1/2 0.550
12 - 1/2 13 - 1/2 13.500 13.498 12.500 12.500 12.502 13.500
500012500750 3/4 0.825
500013000 1/2 0.550
13 14 14.000 13.998 13.000 13.000 13.002 14.000
500013000750 3/4 0.825
500013500 1/2 0.550
13 - 1/2 14 - 1/2 14.500 14.498 13.500 13.500 13.502 14.500
500013500750 3/4 0.825
500014000 1/2 0.550
14 15 15.000 14.998 14.000 14.000 14.002 15.000
500014000750 3/4 0.825
500014500 1/2 0.550
14 - 1/2 15 - 1/2 15.500 15.498 14.500 14.500 14.502 15.500
500014500750 3 /4 0.825
500015000 1/2 0.550
15 16 16.000 15.998 15.000 15.000 15.002 16.000
500015000750 3/4 0.825
+0.010 +0.006 +0.000 +0.000 +0.000 +0.006 +0.009
Tolerance Limits
-0.000 -0.000 -0.003 -0.009 -0.003 -0.000 -0.000
5/8” 62501250 5/8 0.688
1 - 1/4 2 - 1/2 2.500 2.497 1.250 1.250 1.253 2.500
62501250100 1 1.100
62501375 5/8 0.688
1 - 3/8 2 - 5/8 2.625 2.622 1.375 1.375 1.378 2.625
62501375100 1 1.100
62501500 5/8 0.688
1 - 1/2 2 - 3/4 2.750 2.747 1.500 1.500 1.503 2.750
62501500100 1 1.100
62501750 5/8 0.688
1 - 3/4 3 3.000 2.997 1.750 1.750 1.753 3.000
62501750100 1 1.100
62502000 5/8 0.688
2 3 - 1/4 3.250 3.247 2.000 2.000 2.003 3.250
62502000100 1 1.100
HITECHSEALS.COM 59

C A D B E F G
Loaded U-Cups
+0.010 +0.006 +0.000 +0.000 +0.000 +0.006 +0.009

Tolerance Limits
-0.000 -0.000 -0.003 -0.009 -0.003 -0.000 -0.000
5/8” 62502250 5/8 0.688
2 - 1/4 3 - 1/2 3.500 3.497 2.250 2.250 2.253 3.500
62502250100 1 1.100
62502500 5/8 0.688
2 - 1/2 3 - 3/4 3.750 3.747 2.500 2.500 2.503 3.750
62502500100 1 1.100
62502750 5/8 0.688
2 - 3/4 4 4.000 3.997 2.750 2.750 2.753 4.000
62502750100 1 1.100
62503000 5/8 0.688
3 4 - 1/4 4.250 4.247 3.000 3.000 3.003 4.250
62503000100 1 1.100
62503250 5/8 0.688
3 - 1/4 4 - 1/2 4.500 4.497 3.250 3.250 3.253 4.500
62503250100 1 1.100
62503500 5/8 0.688
3 - 1/2 4 - 3/4 4.750 4.747 3.500 3.500 3.503 4.750
62503500100 1 1.100
62503750 5/8 0.688
3 - 3/4 5 5.000 4.997 3.750 3.750 3.753 5.000
62503750100 1 1.100
62504000 5/8 0.688
4 5 - 1/4 5.250 5.247 4.000 4.000 4.003 5.250
62504000100 1 1.100
62504250 5/8 0.688
4 - 1/4 5 - 1/2 5.500 5.497 4.250 4.250 4.253 5.500
62504250100 1 1.100
62504500 5/8 0.688
4 - 1/2 5 - 3/4 5.750 5.747 4.500 4.500 4.503 5.750
62504500100 1 1.100
62504750 5/8 0.688
4 - 3/4 6 6.000 5.997 4.750 4.750 4.753 6.000
62504750100 1 1.100
62505000 5/8 0.688
5 6 - 1/4 6.250 6.247 5.000 5.000 5.003 6.250
62505000100 1 1.100
62505250 5/8 0.688
5 - 1/4 6 - 1/2 6.500 6.447 5.250 5.250 5.253 6.500
62505250100 1 1.100
62505500 5/8 0.688
5 - 1/2 6 - 3/4 6.750 6.747 5.500 5.500 5.503 6.750
62505500100 1 1.100
62505750 5/8 0.688
5 - 3/4 7 7.000 6.997 5.750 5.750 5.753 7.000
62505750100 1 1.100
62506000 5/8 0.688
6 7 - 1/4 7.250 7.247 6.000 6.000 6.003 7.250
62506000100 1 1.100
62506250 5/8 0.688
6 - 1/4 7 - 1/2 7.500 7.497 6.250 6.250 6.253 7.500
62506250100 1 1.100
62506500 5/8 0.688
6 - 1/2 7 - 3/4 7.750 7.747 6.500 6.500 6.503 7.750
62506500100 1 1.100
62506750 5/8 0.688
6 - 3/4 8 8.000 7.997 6.750 6.750 6.753 8.000
62506750100 1 1.100
62507000 5/8 0.688
7 8 - 1/4 8.250 8.247 7.000 7.000 7.003 8.250
62507000100 1 1.100
62507250 5/8 0.688
7 - 1/4 8 - 1/2 8.500 8.497 7.250 7.250 7.253 8.500
62507250100 1 1.100
62507500 5/8 0.688
7 - 1/2 8 - 3/4 8.750 8.747 7.500 7.500 7.503 8.750
62507500100 1 1.100
62507750 5/8 0.688
7 - 3/4 9 9.000 8.997 7.750 7.750 7.753 9.000
62507750100 1 1.100
60 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.006 +0.000 +0.000 +0.000 +0.006 +0.009
Tolerance Limits
-0.000 -0.000 -0.003 -0.009 -0.003 -0.000 -0.000
5/8” 62508000 5/8 0.688
8 9 - 1/4 9.250 9.247 8.000 8.000 8.003 9.250
62508000100 1 1.100
62508250 5/8 0.688
8 - 1/4 9 - 1/2 9.500 9.497 8.250 8.250 8.253 9.500
62508250100 1 1.100
62508500 5/8 0.688
8 - 1/2 9 - 3/4 9.750 9.747 8.500 8.500 8.503 9.750
62508500100 1 1.100
62508750 5/8 0.688
8 - 3/4 10 10.000 9.997 8.750 8.750 8.753 10.000
62508750100 1 1.100
62509000 5/8 0.688
9 10 - 1/4 10.250 10.247 9.000 9.000 9.003 10.250
62509000100 1 1.100
62509250 5/8 0.688
9 - 1/4 10 - 1/2 10.500 10.497 9.250 9.250 9.253 10.500
62509250100 1 1.100
62509500 5/8 0.688
9 - 1/2 10 - 3/4 10.750 10.747 9.500 9.500 9.503 10.750
62509500100 1 1.100
62509750 5/8 0.688
9 - 3/4 11 11.000 10.997 9.750 9.750 9.753 11.000
62509750100 1 1.100
625010000 5/8 0.688
10 11 - 1/4 11.250 11.247 10.000 10.000 10.003 11.250
625010000100 1 1.100
625010250 5/8 0.688
10 - 1/4 11 - 1/2 11.500 11.497 10.250 10.250 10.253 11.500
625010250100 1 1.100
625010500 5/8 0.688
10 - 1/2 11 - 3/4 11.750 11.747 10.500 10.500 10.503 11.750
625010500100 1 1.100
625010750 5/8 0.688
10 - 3/4 12 12.000 11.997 10.750 10.750 10.753 12.000
625010750100 1 1.100
625011000 5/8 0.688
11 12 - 1/4 12.250 12.247 11.000 11.000 11.003 12.250
625011000100 1 1.100
625011250 5/8 0.688
11 - 1/4 12 - 1/2 12.500 12.497 11.250 11.250 11.253 12.500
625011250100 1 1.100
625011500 5/8 0.688
11 - 1/2 12 - 3/4 12.750 12.747 11.500 11.500 11.503 12.750
625011500100 1 1.100
625011750 5/8 0.688
11 - 3/4 13 13.000 12.997 11.750 11.750 11.753 13.000
625011750100 1 1.100
625012000 5/8 0.688
12 13 - 1/4 13.250 13.247 12.000 12.000 12.003 13.250
625012000100 1 1.100
625012250 5/8 0.688
12 - 1/4 13 - 1/2 13.500 13.497 12.250 12.250 12.253 13.500
625012250100 1 1.100
625012500 5/8 0.688
12 - 1/2 13 - 3/4 13.750 13.747 12.500 12.500 12.503 13.750
625012500100 1 1.100
625012750 5/8 0.688
12 - 3/4 14 14.000 13.997 12.750 12.750 12.753 14.000
625012750100 1 1.100
625013000 5/8 0.688
13 14 - 1/4 14.250 14.247 13.000 13.000 13.003 14.250
625013000100 1 1.100
625013250 5/8 0.688
13 - 1/4 14 - 1/2 14.500 14.497 13.250 13.250 13.253 14.500
625013250100 1 1.100
625013500 5/8 0.688
13 - 1/2 14 - 3/4 14.750 14.747 13.500 13.500 13.503 14.750
625013500100 1 1.100
HITECHSEALS.COM 61

C A D B E F G
Loaded U-Cups
+0.010 +0.006 +0.000 +0.000 +0.000 +0.006 +0.009

Tolerance Limits
-0.000 -0.000 -0.003 -0.009 -0.003 -0.000 -0.000
5/8” 625013750 5/8 0.688
13 - 3/4 15 15.000 14.997 13.750 13.750 13.753 15.000
625013750100 1 1.100
625014000 5/8 0.688
14 15 - 1/4 15.250 15.247 14.000 14.000 14.003 15.250
625014000100 1 1.100
625014250 5/8 0.688
14 - 1/4 15 - 1/2 15.500 15.497 14.250 14.250 14.253 15.500
625014250100 1 1.100
625014500 5/8 0.688
14 - 1/2 15 - 3/4 15.750 15.747 14.500 14.500 14.503 15.750
625014500100 1 1.100
625014750 5/8 0.688
14 - 3/4 16 16.000 15.997 14.750 14.750 14.753 16.000
625014750100 1 1.100
625015000 5/8 0.688
15 16 - 1/4 16.250 16.247 15.000 15.000 15.003 16.250
625015000100 1 1.100
625015500 5/8 0.688
15 - 1/2 16 - 3/4 16.750 16.747 15.500 15.500 15.503 16.750
625015500100 1 1.100
625016000 5/8 0.688
16 17 - 1/4 17.250 17.247 16.000 16.000 16.003 17.250
625016000100 1 1.100
625016500 5/8 0.688
16 - 1/2 17 - 3/4 17.750 17.747 16.500 16.500 16.503 17.750
625016500100 1 1.100
625017000 5/8 0.688
17 18 - 1/4 18.250 18.247 17.000 17.000 17.003 18.250
625017000100 1 1.100
625017500 5/8 0.688
17 - 1/2 18 - 3/4 18.750 18.747 17.500 17.500 17.503 18.750
625017500100 1 1.100
625018000 5/8 0.688
18 19 - 1/4 19.250 19.247 18.000 18.000 18.003 19.250
625018000100 1 1.100
+0.010 +0.007 +0.000 +0.000 +0.000 +0.007 +0.011
Tolerance Limits
-0.000 -0.000 -0.004 -0.011 -0.004 -0.000 -0.000
3/4” 75003000 3/4 0.825
3 4 - 1/2 4.500 4.497 3.000 3.000 3.003 4.500
75003000125 1 - 1/4 1.375
75003250 3/4 0.825
3 - 1/4 4 - 3/4 4.750 4.747 3.250 3.250 3.253 4.750
75003250125 1 - 1/4 1.375
75003500 3/4 0.825
3 - 1/2 5 5.000 4.997 3.500 3.500 3.503 5.000
75003500125 1 - 1/4 1.375
75003750 3/4 0.825
3 - 3/4 5 - 1/4 5.250 5.247 3.750 3.750 3.753 5.250
75003750125 1 - 1/4 1.375
75004000 3/4 0.825
4 5 - 1/2 5.500 5.497 4.000 4.000 4.003 5.500
75004000125 1 - 1/4 1.375
75004250 3/4 0.825
4 - 1/4 5 - 3/4 5.750 5.747 4.250 4.250 4.253 5.750
75004250125 1 - 1/4 1.375
75004500 3/4 0.825
4 - 1/2 6 6.000 5.997 4.500 4.500 4.503 6.000
75004500125 1 - 1/4 1.375
75004750 3/4 0.825
4 - 3/4 6 - 1/4 6.250 6.247 4.750 4.750 4.753 6.250
75004750125 1 - 1/4 1.375
75005000 3/4 0.825
5 6 - 1/2 6.500 6.497 5.000 5.000 5.003 6.500
75005000125 1 - 1/4 1.375
75005250 3/4 0.825
5 - 1/4 6 - 3/4 6.750 6.747 5.250 5.250 5.253 6.750
75005250125 1 - 1/4 1.375
75005500 3/4 0.825
5 - 1/2 7 7.000 6.997 5.500 5.500 5.503 7.000
75005500125 1 - 1/4 1.375
62 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.007 +0.000 +0.000 +0.000 +0.007 +0.011
Tolerance Limits
-0.000 -0.000 -0.004 -0.011 -0.004 -0.000 -0.000
3/4” 75005750 3/4 0.825
5 - 3/4 7 - 1/4 7.250 7.247 5.750 5.750 5.753 7.250
75005750125 1 - 1/4 1.375
75006000 3/4 0.825
6 7 - 1/2 7.500 7.497 6.000 6.000 6.003 7.500
75006000125 1 - 1/4 1.375
75006250 3/4 0.825
6 - 1/4 7 - 3/4 7.750 7.747 6.250 6.250 6.253 7.750
75006250125 1 - 1/4 1.375
75006500 3/4 0.825
6 - 1/2 8 8.000 7.997 6.500 6.500 6.503 8.000
75006500125 1 - 1/4 1.375
75006750 3/4 0.825
6 - 3/4 8 - 1/4 8.250 8.247 6.750 6.750 6.753 8.250
75006750125 1 - 1/4 1.375
75007000 3/4 0.825
7 8 - 1/2 8.500 8.497 7.000 7.000 7.003 8.500
75007000125 1 - 1/4 1.375
75007250 3/4 0.825
7 - 1/4 8 - 3/4 8.750 8.747 7.250 7.250 7.253 8.750
75007250125 1 - 1/4 1.375
75007500 3/4 0.825
7 - 1/2 9 9.000 8.997 7.500 7.500 7.503 9.000
75007500125 1 - 1/4 1.375
75007750 3/4 0.825
7 - 3/4 9 - 1/4 9.250 9.247 7.750 7.750 7.753 9.250
75007750125 1 - 1/4 1.375
75008000 3/4 0.825
8 9 - 1/2 9.500 9.497 8.000 8.000 8.003 9.500
75008000125 1 - 1/4 1.375
75008250 3/4 0.825
8 - 1/4 9 - 3/4 9.750 9.747 8.250 8.250 8.253 9.750
75008250125 1 - 1/4 1.375
75008500 3/4 0.825
8 - 1/2 10 10.000 9.997 8.500 8.500 8.503 10.000
75008500125 1 - 1/4 1.375
75008750 3/4 0.825
8 - 3/4 10 - 1/4 10.250 10.247 8.750 8.750 8.753 10.250
75008750125 1 - 1/4 1.375
75009000 3/4 0.825
9 10 - 1/2 10.500 10.447 9.000 9.000 9.003 10.500
75009000125 1 - 1/4 1.375
75009250 3/4 0.825
9 - 1/4 10 - 3/4 10.750 10.747 9.250 9.250 9.253 10.750
75009250125 1 - 1/4 1.375
75009500 3/4 0.825
9 - 1/2 11 11.000 10.997 9.500 9.500 9.503 11.000
75009500125 1 - 1/4 1.375
75009750 3/4 0.825
9 - 3/4 11 - 1/4 11.250 11.247 9.750 9.750 9.753 11.250
75009750125 1 - 1/4 1.375
750010000 3/4 0.825
10 11 - 1/2 11.500 11.497 10.000 10.000 10.003 11.500
750010000125 1 - 1/4 1.375
750010500 3/4 0.825
10 - 1/2 12 12.000 11.997 10.500 10.500 10.503 12.000
750010500125 1 - 1/4 1.375
750011000 3/4 0.825
11 12 - 1/2 12.500 12.497 11.000 11.000 11.003 12.500
75001100125 1 - 1/4 1.375
750011500 3/4 0.825
11 - 1/2 13 13.000 12.997 11.500 11.500 11.503 13.000
750011500125 1 - 1/4 1.375
750012000 3/4 0.825
12 13 - 1/2 13.500 13.497 12.000 12.000 12.003 13.500
750012000125 1 - 1/4 1.375
750012500 3/4 0.825
12 - 1/2 14 14.000 13.997 12.500 12.500 12.503 14.000
750012500125 1 - 1/4 1.375
HITECHSEALS.COM 63

C A D B E F G
Loaded U-Cups
+0.010 +0.007 +0.000 +0.000 +0.000 +0.007 +0.011

Tolerance Limits
-0.000 -0.000 -0.004 -0.011 -0.004 -0.000 -0.000
3/4” 750013000 3/4 0.825
13 14 - 1/2 14.500 14.497 13.000 13.000 13.003 14.500
750013000125 1 - 1/4 1.375
750013500 3/4 0.825
13 - 1/2 15 15.000 14.997 13.500 13.500 13.503 15.000
750013500125 1 - 1/4 1.375
750014000 3/4 0.825
14 15 - 1/2 15.500 15.497 14.000 14.000 14.003 15.500
750014000125 1 - 1/4 1.375
750014500 3/4 0.825
14 - 1/2 16 16.000 15.997 14.500 14.500 14.503 16.000
750014500125 1 - 1/4 1.375
750015000 3/4 0.825
15 16 - 1/2 16.500 16.497 15.000 15.000 15.003 16.500
750015000125 1 - 1/4 1.375
750015500 3/4 0.825
15 - 1/2 17 17.000 16.997 15.500 15.500 15.503 17.000
750015500125 1 - 1/4 1.375
750016000 3/4 0.825
16 17 - 1/2 17.500 17.497 16.000 16.000 16.003 17.500
750016000125 1 - 1/4 1.375
750016500 3/4 0.825
16 - 1/2 18 18.000 17.997 16.500 16.500 16.503 18.000
750016500125 1 - 1/4 1.375
750017000 3/4 0.825
17 18 - 1/2 18.500 18.497 17.000 17.000 17.003 18.500
750017000125 1 - 1/4 1.375
750017500 3/4 0.825
17 - 1/2 19 19.000 18.997 17.500 17.500 17.503 19.000
750017500125 1 - 1/4 1.375
750018000 3/4 0.825
18 19 - 1/2 19.500 19.497 18.000 18.000 18.003 19.500
750018000125 1 - 1/4 1.375
750018500 3/4 0.825
18 - 1/2 20 20.000 19.997 18.500 18.500 18.503 20.000
750018500125 1 - 1/4 1.375
750019000 3/4 0.825
19 20 - 1/2 20.500 20.497 19.000 19.000 19.003 20.500
750019000125 1 - 1/4 1.375
750019500 3/4 0.825
19 - 1/2 21 21.000 20.997 19.500 19.500 19.503 21.000
750019500125 1 - 1/4 1.375
750020000 3/4 0.825
20 21 - 1/2 21.500 21.497 20.000 20.000 20.003 21.500
750020000125 1 - 1/4 1.375
+0.010 +0.009 +0.000 +0.000 +0.000 +0.009 +0.015
Tolerance Limits
-0.000 -0.000 -0.005 -0.015 -0.005 -0.000 -0.000
1” 10003000 1 1.100
3 5 5.000 4.996 3.000 3.000 3.004 5.000
10003000150 1 - 1/2 1.650
10003500 1 1.100
3 - 1/2 5 - 1/2 5.500 5.496 3.500 3.500 3.504 5.500
10003500150 1 - 1/2 1.650
10004000 1 1.100
4 6 6.000 5.996 4.000 4.000 4.004 6.000
10004000150 1 - 1/2 1.650
10004500 1 1.100
4 - 1/2 6 - 1/2 6.500 6.496 4.500 4.500 4.504 6.500
10004500150 1 - 1/2 1.650
10005000 1 1.100
5 7 7.000 6.996 5.000 5.000 5.004 7.000
10005000150 1 - 1/2 1.650
10005500 1 1.100
5 - 1/2 7 - 1/2 7.500 7.496 5.500 5.500 5.504 7.500
10005500150 1 - 1/2 1.650
10006000 1 1.100
6 8 8.000 7.996 6.000 6.000 6.004 8.000
10006000150 1 - 1/2 1.650
64 HITECHSEALS.COM
C A D B E F G
Loaded U-Cups
+0.010 +0.009 +0.000 +0.000 +0.000 +0.009 +0.015
Tolerance Limits
-0.000 -0.000 -0.005 -0.015 -0.005 -0.000 -0.000
1” 10006500 1 1.100
6 - 1/2 8 - 1/2 8.500 8.496 6.500 6.500 6.504 8.500
10006500150 1 - 1/2 1.650
10007000 1 1.100
7 9 9.000 8.996 7.000 7.000 7.004 9.000
10007000150 1 - 1/2 1.650
10007500 1 1.100
7 - 1/2 9 - 1/2 9.500 9.496 7.500 7.500 7.504 9.500
10007500150 1 - 1/2 1.650
10008000 1 1.100
8 10 10.000 9.996 8.000 8.000 8.004 10.000
10008000150 1 - 1/2 1.650
10008500 1 1.100
8 - 1/2 10 - 1/2 10.500 10.496 8.500 8.500 8.504 10.500
10008500150 1 - 1/2 1.650
10009000 1 1.100
9 11 11.000 10.996 9.000 9.000 9.004 11.000
10009000150 1 - 1/2 1.650
10009500 1 1.100
9 - 1/2 11 - 1/2 11.500 11.496 9.500 9.500 9.504 11.500
10009500150 1 - 1/2 1.650
100010000 1 1.100
10 12 12.000 11.996 10.000 10.000 10.004 12.000
100010000150 1 - 1/2 1.650
100010500 1 1.100
10 - 1/2 12 - 1/2 12.500 12.496 10.500 10.500 10.504 12.500
100010500150 1 - 1/2 1.650
100011000 1 1.100
11 13 13.000 12.996 11.000 11.000 11.004 13.000
100011000150 1 - 1/2 1.650
100011500 1 1.100
11 - 1/2 13 - 1/2 13.500 13.496 11.500 11.500 11.504 13.500
100011500150 1 - 1/2 1.650
100012000 1 1.100
12 14 14.000 13.996 12.000 12.000 12.004 14.000
100012000150 1 - 1/2 1.650
100012500 1 1.100
12 - 1/2 14 - 1/2 14.500 14.496 12.500 12.500 12.504 14.500
100012500150 1 - 1/2 1.650
100013000 1 1.100
13 15 15.000 14.996 13.000 13.000 13.004 15.000
100013000150 1 - 1/2 1.650
100013500 1 1.100
13 - 1/2 15 - 1/2 15.500 15.496 13.500 13.500 13.504 15.500
100013500150 1 - 1/2 1.650
100014000 1 1.100
14 16 16.000 15.996 14.000 14.000 14.004 16.000
100014000150 1 - 1/2 1.650
100014500 1 1.100
14 - 1/2 16 - 1/2 16.500 16.496 14.500 14.500 14.504 16.500
100014500150 1 - 1/2 1.650
100015000 1 1.100
15 17 17.000 16.996 15.000 15.000 15.004 17.000
100015000150 1 - 1/2 1.650
100015500 1 1.100
15 - 1/2 17 - 1/2 17.500 17.496 15.500 15.500 15.504 17.500
100015500150 1 - 1/2 1.650
100016000 1 1.100
16 18 18.000 17.996 16.000 16.000 16.004 18.000
100016000150 1 - 1/2 1.650
100016500 1 1.100
16 - 1/2 18 - 1/2 18.500 18.496 16.500 16.500 16.504 18.500
100016500150 1 - 1/2 1.650
100017000 1 1.100
17 19 19.000 18.996 17.000 17.000 17.004 19.000
100017000150 1 - 1/2 1.650
100017500 1 1.100
17 - 1/2 19 - 1/2 19.500 19.496 17.500 17.500 17.504 19.500
100017500150 1 - 1/2 1.650
HITECHSEALS.COM 65

C A D B E F G
Loaded U-Cups
+0.010 +0.009 +0.000 +0.000 +0.000 +0.009 +0.015

Tolerance Limits
-0.000 -0.000 -0.005 -0.015 -0.005 -0.000 -0.000
1” 100018000 1 1.100
18 20 20.000 19.996 18.000 18.000 18.004 20.000
100018000150 1 - 1/2 1.650
100018500 1 1.100
18 - 1/2 20 - 1/2 20.500 20.496 18.500 18.500 18.504 20.500
100018500150 1 - 1/2 1.650
100019000 1 1.100
19 21 21.000 20.996 19.000 19.000 19.004 21.000
100019000150 1 - 1/2 1.650
100019500 1 1.100
19 - 1/2 21 - 1/2 21.500 21.496 19.500 19.500 19.504 21.500
100019500150 1 - 1/2 1.650
100020000 1 1.100
20 22 22.000 21.996 20.000 20.000 20.004 22.000
100020000150 1 - 1/2 1.650
100022000 1 1.100
22 24 24.000 23.996 22.000 22.000 22.004 24.000
100022000150 1 - 1/2 1.650
100024000 1 1.100
24 26 26.000 25.996 24.000 24.000 24.004 26.000
100024000150 1 - 1/2 1.650
100026000 1 1.100
26 28 28.000 27.996 26.000 26.000 26.004 28.000
100026000150 1 - 1/2 1.650
100028000 1 1.100
28 30 30.000 29.996 28.000 28.000 28.004 30.000
100028000150 1 - 1/2 1.650
100030000 1 1.100
30 32 32.000 31.996 30.000 30.000 30.004 32.000
100030000150 1 - 1/2 1.650
100032000 1 1.100
32 34 34.000 33.996 32.000 32.000 32.004 34.000
100032000150 1 - 1/2 1.650
Custom sizes available upon request. For more information, contact a Hi-Tech Seals representative.
66 HITECHSEALS.COM
Imperial Seals Pressure Inverting Pedestal
LIP Rings
PTFE -268 °C to 232°C
LIP PIP
Product Description
Pressure inverting pedestals are designed to convert a loaded U-cup into a bi-directional seal for high pressure applications.
The LIP profile is rectangular in shape which makes it compatible with both quad loaded and O-ring loaded U-cups. The PIP
ring design is only functional in conjunction with an O-ring loaded U-cup. For gland dimension and design information,
contact a Hi-Tech Seals representative.
PTFE back-up rings can function as a LIP ring for beveled loaded U-cups in low to medium pressure applications. Consult
a Hi-Tech Seals representative before substituting.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
LIP C/S I.D. Material - if other than Urethane

PIP
Example: PIP 2500 3000 - Urethane PIP Ring, 1/4” C/S, 3” I.D., 3 - 1/2” O.D.
HITECHSEALS.COM 67
LIP Rings Imperial Seals
O.D.
I.D.
C/S
LIP Rings
PIP style rings are available in the below sizes

and are represented with the prefix PIP.
Part Number I.D. O.D. C/S Part Number I.D. O.D. C/S Part Number I.D. O.D. C/S
LIP 12500437 7/16 11/16 1/8 LIP 25001937 1 - 15/16 2 - 7/16 1/4 LIP 37504750 4 - 3/4 5 - 1/2 3/8
LIP 12500500 1/2 3/4 1/8 LIP 25002000 2 2 - 1/2 1/4 LIP 37505250 5 - 1/4 6 3/8
LIP 12500750 3/4 1 1/8 LIP 25002250 2 - 1/4 2 - 3/4 1/4 LIP 37505500 5 - 1/2 6 - 1/4 3/8
LIP 12501000 1 1 - 1/4 1/8 LIP 25002500 2 - 1/2 3 1/4 LIP 37505750 5 - 3/4 6 - 1/2 3/8
LIP 12501125 1 - 1/8 1 - 3/8 1/8 LIP 25002750 2 - 3/4 3 - 1/4 1/4 LIP 37506250 6 - 1/4 7 3/8
LIP 12501250 1 - 1/4 1 - 1/2 1/8 LIP 25002875 2 - 7/8 3 - 3/8 1/4 LIP 37506750 6 - 3/4 7 - 1/2 3/8
LIP 12501500 1 - 1/2 1 - 3/4 1/8 LIP 25003000 3 3 - 1/2 1/4 LIP 37507250 7 - 1/4 8 3/8
LIP 12501750 1 - 3/4 2 1/8 LIP 25003250 3 - 1/4 3 - 3/4 1/4 LIP 37508250 8 - 1/4 9 3/8
LIP 12502000 2 2 - 1/4 1/8 LIP 25003500 3 - 1/2 4 1/4 LIP 37508500 8 - 1/2 9 - 1/4 3/8
LIP 18700625 5/8 1 3/16 LIP 25003750 3 - 3/4 4 - 1/4 1/4 LIP 37508750 8 - 3/4 9 - 1/2 3/8
LIP 18700750 3/4 1 - 1/8 3/16 LIP 25004000 4 4 - 1/2 1/4 LIP 375014250 14 - 1/4 15 3/8
LIP 18700875 7/8 1 - 1/4 3/16 LIP 25004250 4 - 1/4 4 - 3/4 1/4 LIP 375019250 19 - 1/4 20 3/8
LIP 18700937 15/16 1 - 5/16 3/16 LIP 25004500 4 - 1/2 5 1/4 LIP 50003500 3 - 1/2 4 - 1/2 1/2
LIP 18701000 1 1 - 3/8 3/16 LIP 25005000 5 5 - 1/2 1/4 LIP 50004000 4 5 1/2
LIP 18701125 1 - 1/8 1 - 1/2 3/16 LIP 25005250 5 - 1/4 5 - 3/4 1/4 LIP 50005000 5 6 1/2
LIP 18701250 1 - 1/4 1 - 5/8 3/16 LIP 25005500 5 - 1/2 6 1/4 LIP 50005250 5 - 1/4 6 - 1/4 1/2
LIP 18701375 1 - 3/8 1 - 3/4 3/16 LIP 25006000 6 6 - 1/2 1/4 LIP 50006000 6 7 1/2
LIP 18701500 1 - 1/2 1 - 7/8 3/16 LIP 25006500 6 - 1/2 7 1/4 LIP 50007000 7 8 1/2
LIP 18701625 1 - 5/8 2 3/16 LIP 25007000 7 7 - 1/2 1/4 LIP 50008000 8 9 1/2
LIP 18701750 1 - 3/4 2 - 1/8 3/16 LIP 31201875 1 - 7/8 2 - 1/2 5/16 LIP 50009000 9 10 1/2
LIP 18702000 2 2 - 3/8 3/16 LIP 31202375 2 - 3/8 3 5/16 LIP 50009500 9 - 1/2 10 - 1/2 1/2
LIP 18702375 2 - 3/8 2 - 3/4 3/16 LIP 31203375 3 - 3/8 4 5/16 LIP 500011000 11 12 1/2
LIP 18702500 2 - 1/2 2 - 7/8 3/16 LIP 31204375 4 - 3/8 5 5/16 LIP 500011875 11 - 7/8 12 - 7/8 1/2
LIP 18702625 2 - 5/8 3 3/16 LIP 31204500 4 - 1/2 5 - 1/8 5/16 LIP 500014000 14 15 1/2
LIP 18702750 2 - 3/4 3 - 1/8 3/16 LIP 31205500 5 - 1/2 6 - 1/8 5/16 LIP 500015000 15 16 1/2
LIP 18703000 3 3 - 3/8 3/16 LIP 31206375 6 - 3/8 7 5/16 LIP 500019000 19 20 1/2
LIP 18703125 3 - 1/8 3 - 1/2 3/16 LIP 37502000 2 2 - 3/4 3/8 LIP 500020000 20 21 1/2
LIP 18703250 3 - 1/4 3 - 5/8 3/16 LIP 37502250 2 - 1/4 3 3/8 LIP 500020250 20 - 1/4 21 - 1/4 1/2
LIP 18703375 3 - 3/8 3 - 3/4 3/16 LIP 37502500 2 - 1/2 3 - 1/4 3/8 LIP 500021000 21 22 1/2
LIP 18703625 3 - 5/8 4 3/16 LIP 37502750 2 - 3/4 3 - 1/2 3/8 LIP 500024500 24 - 1/2 25 - 1/2 1/2
LIP 18704000 4 4 - 3/8 3/16 LIP 37503250 3 - 1/4 4 3/8 LIP 500026500 26 - 1/2 27 - 1/2 1/2
LIP 25001000 1 1 - 1/2 1/4 LIP 37503500 3 - 1/2 4 - 1/4 3/8 LIP 62507000 7 8 - 1/4 5/8
LIP 25001250 1 - 1/4 1 - 3/4 1/4 LIP 37503750 3 - 3/4 4 - 1/2 3/8 LIP 62507250 7 - 1/4 8 - 1/2 5/8
LIP 25001500 1 - 1/2 2 1/4 LIP 37504000 4 4 - 3/4 3/8 LIP 62507500 7 - 1/2 8 - 3/4 5/8
LIP 25001750 1 - 3/4 2 - 1/4 1/4 LIP 37504250 4 - 1/4 5 3/8
68 HITECHSEALS.COM
Imperial Seals Z-Seals
Base Materials
Z-Seals
Additional compounds are available upon request, includ-

ing: carboxylated nitrile, hydrogenated nitrile, EPDM, TFE/P,
and PTFE.
Standard Z Deep Z
Product Description
Z-seals are a squeeze type seal primarily used for heavy-duty rod applications. This seal combines excellent sealability,
low compression set, and superior anti-extrusion characteristics compared to other lip seals. Under low-pressure condi-
tions the sealing lip provides its own compressive seal force. As the pressure increases, hydrostatic pressure is mechanically
transmit¬ted through the elastomer seal element into the anti-extrusion base. The applied force then deflects radially in a
controlled manner, closing the extrusion gap behind the sealing lip. Z-seals are also good at compensating for high shock
loads, such as bucket impacts.
Part Numbers:
Z - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
C/S I.D. Height Material - if other than Urethane

D - Deep Z-Seal
Example: Z 5000 3000 750 D - Urethane Base, Nitrile Seal Lip, Deep Z-Seal, 1/2” C/S, 3” I.D., 3/4” Height
HITECHSEALS.COM 69 69
Z-Seals Imperial Seals
Z-Seals
Z-seal part numbers are based on a nitrile sealing lip and a urethane base.
Part Nominal Part Nominal

C/S Number I.D. O.D. Height C/S Number I.D. O.D. Height
1/8” Z 12500125250 1/8 3/8 1/4 3/16" Z 18700437312 7/16 13/16 5/16
Z 12500187250 3/16 7/16 1/4 Z 18700500312 1/2 7/8 5/16
Z 12500250250 1/4 1/2 1/4 Z 18700562312 9/16 15/16 5/16
Z 12500312250 5/16 9/16 1/4 Z 18700625312 5/8 1 5/16
Z 12500375250 3/8 5/8 1/4 Z 18700687312 11/16 1 - 1/16 5/16
Z 12500437250 7/16 11/16 1/4 Z 18700750312 3/4 1 - 1/8 5/16
Z 12500500250 1/2 3/4 1/4 Z 18700812312 13/16 1 - 3/16 5/16
Z 12500562250 9/16 13/16 1/4 Z 18700875312 7/8 1 - 1/4 5/16
Z 12500625250 5/8 7/8 1/4 Z 18700937312 15/16 1 - 5/16 5/16
Z 12500687250 11/16 15/16 1/4 Z 18701000312 1 1 - 3/8 5/16
Z 12500750250 3/4 1 1/4 Z 18701062312 1 - 1/16 1 - 7/16 5/16
Z 12500812250 13/16 1 - 1/16 1/4 Z 18701125312 1 - 1/8 1 - 1/2 5/16
Z 12500875250 7/8 1 - 1/8 1/4 Z 18701187312 1 - 3/16 1 - 9/16 5/16
Z 12500937250 15/16 1 - 3/16 1/4 Z 18701250312 1 - 1/4 1 - 5/8 5/16
Z 12501000250 1 1 - 1/4 1/4 Z 18701312312 1 - 5/16 1 -11/16 5/16
Z 12501062250 1 - 1/16 1 - 5/16 1/4 Z 18701375312 1 - 3/8 1 - 3/4 5/16
Z 12501125250 1 - 1/8 1 - 3/8 1/4 Z 18701437312 1 - 7/16 1 -13/16 5/16
Z 12501187250 1 - 3/16 1 - 7/16 1/4 Z 18701500375 1 - 1/2 1 - 7/8 3/8
Z 12501250250 1 - 1/4 1 - 1/2 1/4 Z 18701625375 1 - 5/8 2 3/8
Z 12501312250 1 - 5/16 1 - 9/16 1/4 Z 18701687375 1 -11/16 2 - 1/16 3/8
Z 12501375250 1 - 3/8 1 - 5/8 1/4 Z 18701750375 1 - 3/4 2 - 1/8 3/8
Z 12501437250 1 - 7/16 1 -11/16 1/4 Z 18701875375 1 - 7/8 2 - 1/4 3/8
Z 12501500250 1 - 1/2 1 - 3/4 1/4 Z 18702000375 2 2 - 3/8 3/8
Z 12501625250 1 - 5/8 1 - 7/8 1/4 Z 18702125375 2 - 1/8 2 - 1/2 3/8
Z 12501750250 1 - 3/4 2 1/4 Z 18702250375 2 - 1/4 2 - 5/8 3/8
Z 12501875250 1 - 7/8 2 - 1/8 1/4 Z 18702375375 2 - 3/8 2 - 3/4 3/8
Z 12502000250 2 2 - 1/4 1/4 Z 18702500375 2 - 1/2 2 - 7/8 3/8
Z 12502125250 2 - 1/8 2 - 3/8 1/4 Z 18702625375 2 - 5/8 3 3/8
Z 12502250250 2 - 1/4 2 - 1/2 1/4 Z 18702750375 2 - 3/4 3 - 1/8 3/8
Z 12502375250 2 - 3/8 2 - 5/8 1/4 Z 18702875375 2 - 7/8 3 - 1/4 3/8
Z 12502500250 2 - 1/2 2 - 3/4 1/4 Z 18703000375 3 3 - 3/8 3/8
3/16" Z 18700187312 3/16 9/16 5/16 Z 18703125375 3 - 1/8 3 - 1/2 3/8
Z 18700250312 1/4 5/8 5/16 Z 18703250375 3 - 1/4 3 - 5/8 3/8
Z 18700312312 5/16 11/16 5/16 Z 18703375375 3 - 3/8 3 - 3/4 3/8
Z 18700375312 3/8 3/4 5/16 Z 18703500375 3 - 1/2 3 - 7/8 3/8
70 HITECHSEALS.COM
3/16” Z 18703625375 3 - 5/8 4 3/8 1/4” Z 25003750375 3 - 3/4 4 - 1/4 3/8
Z 18703750375 3 - 3/4 4 - 1/8 3/8 Z 25004000562 4 4 - 1/2 9/16
Z 18703875375 3 - 7/8 4 - 1/4 3/8 Z 25004125562 4 - 1/8 4 - 5/8 9/16
Z 18704000375 4 4 - 3/8 3/8 Z 25004250562 4 - 1/4 4 - 3/4 9/16
Z-Seals
Z 18704125375 4 - 1/8 4 - 1/2 3/8 Z 25004375562 4 - 3/8 4 - 7/8 9/16
Z 18704250375 4 - 1/4 4 - 5/8 3/8 Z 25004500562 4 - 1/2 5 9/16
Z 18704375375 4 - 3/8 4 - 3/4 3/8 Z 25004625562 4 - 5/8 5 - 1/8 9/16
Z 18704500375 4 - 1/2 4 - 7/8 3/8 Z 25004750562 4 - 3/4 5 - 1/4 9/16
1/4” Z 25000250375 1/4 3/4 3/8 Z 25004875562 4 - 7/8 5 - 3/8 9/16
Z 25000312375 5/16 13/16 3/8 Z 25005000562 5 5 - 1/2 9/16
Z 25000375375 3/8 7/8 3/8 Z 25005125562 5 - 1/8 5 - 5/8 9/16
Z 25000437375 7/16 15/16 3/8 Z 25005250562 5 - 1/4 5 - 3/4 9/16
Z 25000500375 1/2 1 3/8 Z 25005375562 5 - 3/8 5 - 7/8 9/16
Z 25000562375 9/16 1 - 1/16 3/8 Z 25005500562 5 - 1/2 6 9/16
Z 25000625375 5/8 1 - 1/8 3/8 Z 25005625562 5 - 5/8 6 - 1/8 9/16
Z 25000687375 11/16 1 - 3/16 3/8 Z 25005750562 5 - 3/4 6 - 1/4 9/16
Z 25000750375 3/4 1 - 1/4 3/8 Z 25005875562 5 - 7/8 6 - 3/8 9/16
Z 25000812375 13/16 1 - 5/16 3/8 Z 25006000562 6 6 - 1/2 9/16
Z 25000875375 7/8 1 - 3/8 3/8 Z 25006250562 6 - 1/4 6 - 3/4 9/16
Z 25000937375 15/16 1 - 7/16 3/8 Z 25006500562 6 - 1/2 7 9/16
Z 25001000375 1 1 - 1/2 3/8 Z 25006750562 6 - 3/4 7 - 1/4 9/16
Z 25001062375 1 - 1/16 1 - 9/16 3/8 Z 25007000562 7 7 - 1/2 9/16
Z 25001125375 1 - 1/8 1 - 5/8 3/8 Z 25007250562 7 - 1/4 7 - 3/4 9/16
Z 25001187375 1 - 3/16 1 - 11/16 3/8 Z 25007500562 7 - 1/2 8 9/16
Z 25001250375 1 - 1/4 1 - 3/4 3/8 Z 25007750562 7 - 3/4 8 - 1/4 9/16
Z 25001312375 1 - 5/16 1 - 13/16 3/8 Z 25008000562 8 8 - 1/2 9/16
Z 25001375375 1 - 3/8 1 - 7/8 3/8 Z 25008250562 8 - 1/4 8 - 3/4 9/16
Z 25001437375 1 - 7/16 1 - 15/16 3/8 Z 25008500562 8 - 1/2 9 9/16
Z 25001500375 1 - 1/2 2 3/8 Z 25008750562 8 - 3/4 9 - 1/4 9/16
Z 25001625375 1 - 5/8 2 - 1/8 3/8 Z 25009000562 9 9 - 1/2 9/16
Z 25001750375 1 - 3/4 2 - 1/4 3/8 Z 25009250562 9 - 1/4 9 - 3/4 9/16
Z 25001875375 1 - 7/8 2 - 3/8 3/8 Z 25009500562 9 - 1/2 10 9/16
Z 25002000375 2 2 - 1/2 3/8 Z 25009750562 9 - 3/4 10 - 1/4 9/16
Z 25002125375 2 - 1/8 2 - 5/8 3/8 Z 250010000562 10 10 - 1/2 9/16
Z 25002250375 2 - 1/4 2 - 3/4 3/8 5/16” Z 31200375500 3/8 1 1/2
Z 25002375375 2 - 3/8 2 - 7/8 3/8 Z 31200437500 7/16 1 - 1/16 1/2
Z 25002500375 2 - 1/2 3 3/8 Z 31200500500 1/2 1 - 1/8 1/2
Z 25002625375 2 - 5/8 3 - 1/8 3/8 Z 31200562500 9/16 1 - 3/16 1/2
Z 25002750375 2 - 3/4 3 - 1/4 3/8 Z 31200625500 5/8 1 - 1/4 1/2
Z 25003250375 3 - 1/4 3 - 3/4 3/8 Z 31200687500 11/16 1 - 5/16 1/2
Z 25003375375 3 - 3/8 3 - 7/8 3/8 Z 31200750500 3/4 1 - 3/8 1/2
Z 25003500375 3 - 1/2 4 3/8 Z 31200812500 13/16 1 - 7/16 1/2
Z 25003625375 3 - 5/8 4 - 1/8 3/8 Z 31200875500 7/8 1 - 1/2 1/2
HITECHSEALS.COM 71

5/16” Z 31200937500 15/16 1 - 9/16 1/2 5/16” Z 31205750625 5 - 3/4 6 - 3/8 5/8
Z 31201000500 1 1 - 5/8 1/2 Z 31205875625 5 - 7/8 6 - 1/2 5/8
Z 31201062500 1 - 1/16 1 -11/16 1/2 Z 31206000625 6 6 - 5/8 5/8
Z 31201125500 1 - 1/8 1 - 3/4 1/2 Z 31206125625 6 - 1/8 6 - 3/4 5/8
Z-Seals
Z 31201187500 1 - 3/16 1 -13/16 1/2 Z 31206250625 6 - 1/4 6 - 7/8 5/8

Z 31201250500 1 - 1/4 1 - 7/8 1/2 Z 31206375625 6 - 3/8 7 5/8
Z 31201312500 1 - 5/16 1 -15/16 1/2 Z 31206500625 6 - 1/2 7 - 1/8 5/8
Z 31201375500 1 - 3/8 2 1/2 Z 31206625625 6 - 5/8 7 - 1/4 5/8
Z 31201437500 1 - 7/16 2 - 1/16 1/2 Z 31206750625 6 - 3/4 7 - 3/8 5/8
Z 31201500500 1 - 1/2 2 - 1/8 1/2 Z 31206875625 6 - 7/8 7 - 1/2 5/8
Z 31201625500 1 - 5/8 2 - 1/4 1/2 Z 31207000625 7 7 - 5/8 5/8
Z 31201750500 1 - 3/4 2 - 3/8 1/2 Z 31207125625 7 - 1/8 7 - 3/4 5/8
Z 31201875500 1 - 7/8 2 - 1/2 1/2 Z 31207250625 7 - 1/4 7 - 7/8 5/8
Z 31202000500 2 2 - 5/8 1/2 Z 31207375625 7 - 3/8 8 5/8
Z 31202125500 2 - 1/8 2 - 3/4 1/2 3/8” Z 37500500625 1/2 1 - 1/4 5/8
Z 31202250500 2 - 1/4 2 - 7/8 1/2 Z 37500562625 9/16 1 - 5/16 5/8
Z 31202375500 2 - 3/8 3 1/2 Z 37500625625 5/8 1 - 3/8 5/8
Z 31202500500 2 - 1/2 3 - 1/8 1/2 Z 37500687625 11/16 1 - 7/16 5/8
Z 31202625500 2 - 5/8 3 - 1/4 1/2 Z 37500750625 3/4 1 - 1/2 5/8
Z 31202750500 2 - 3/4 3 - 3/8 1/2 Z 37500812625 13/16 1 - 9/16 5/8
Z 31202875500 2 - 7/8 3 - 1/2 1/2 Z 37500875625 7/8 1 - 5/8 5/8
Z 31203000500 3 3 - 5/8 1/2 Z 37500937625 15/16 1 -11/16 5/8
Z 31203125500 3 - 1/8 3 - 3/4 1/2 Z 37501000625 1 1 - 3/4 5/8
Z 31203250500 3 - 1/4 3 - 7/8 1/2 Z 37501062625 1 - 1/16 1 -13/16 5/8
Z 31203375500 3 - 3/8 4 1/2 Z 37501125625 1 - 1/8 1 - 7/8 5/8
Z 31203500500 3 - 1/2 4 - 1/8 1/2 Z 37501187625 1 - 3/16 1 -15/16 5/8
Z 31203625500 3 - 5/8 4 - 1/4 1/2 Z 37501250625 1 - 1/4 2 5/8
Z 31203750500 3 - 3/4 4 - 3/8 1/2 Z 37501312625 1 - 5/16 2 - 1/16 5/8
Z 31203875500 3 - 7/8 4 - 1/2 1/2 Z 37501375625 1 - 3/8 2 - 1/8 5/8
Z 31204000562 4 4 - 5/8 9/16 Z 37501437625 1 - 7/16 2 - 3/16 5/8
Z 31204125562 4 - 1/8 4 - 3/4 9/16 Z 37501500625 1 - 1/2 2 - 1/4 5/8
Z 31204250562 4 - 1/4 4 - 7/8 9/16 Z 37501625625 1 - 5/8 2 - 3/8 5/8
Z 31204375562 4 - 3/8 5 9/16 Z 37501750625 1 - 3/4 2 - 1/2 5/8
Z 31204500625 4 - 1/2 5 - 1/8 5/8 Z 37501875625 1 - 7/8 2 - 5/8 5/8
Z 31204625625 4 - 5/8 5 - 1/4 5/8 Z 37502000625 2 2 - 3/4 5/8
Z 31204750625 4 - 3/4 5 - 3/8 5/8 Z 37502125625 2 - 1/8 2 - 7/8 5/8
Z 31204875625 4 - 7/8 5 - 1/2 5/8 Z 37502250625 2 - 1/4 3 5/8
Z 31205000625 5 5 - 5/8 5/8 Z 37502375625 2 - 3/8 3 - 1/8 5/8
Z 31205125625 5 - 1/8 5 - 3/4 5/8 Z 37502500625 2 - 1/2 3 - 1/4 5/8
Z 31205250625 5 - 1/4 5 - 7/8 5/8 Z 37502625625 2 - 5/8 3 - 3/8 5/8
Z 31205375625 5 - 3/8 6 5/8 Z 37502750625 2 - 3/4 3 - 1/2 5/8
Z 31205500625 5 - 1/2 6 - 1/8 5/8 Z 37502875625 2 - 7/8 3 - 5/8 5/8
Z 31205625625 5 - 5/8 6 - 1/4 5/8 Z 37503000625 3 3 - 3/4 5/8
72 HITECHSEALS.COM
3/8” Z 37503125625 3 - 1/8 3 - 7/8 5/8 3/8” Z 375011000625 11 11 - 3/4 5/8
Z 37503250625 3 - 1/4 4 5/8 Z 375011250625 11 - 1/4 12 5/8
Z 37503375625 3 - 3/8 4 - 1/8 5/8 Z 375011500625 11 - 1/2 12 - 1/4 5/8
Z 37503500625 3 - 1/2 4 - 1/4 5/8 Z 375011750625 11 - 3/4 12 - 1/2 5/8
Z-Seals
Z 37503625625 3 - 5/8 4 - 3/8 5/8 Z 375012000625 12 12 - 3/4 5/8
Z 37503750625 3 - 3/4 4 - 1/2 5/8 1/2” Z 50001000750 1 2 3/4
Z 37503875625 3 - 7/8 4 - 5/8 5/8 Z 50001250750 1 - 1/4 2 - 1/4 3/4
Z 37504000625 4 4 - 3/4 5/8 Z 50001375750 1 - 3/8 2 - 3/8 3/4
Z 37504125625 4 - 1/8 4 - 7/8 5/8 Z 50001500750 1 - 1/2 2 - 1/2 3/4
Z 37504250625 4 - 1/4 5 5/8 Z 50001750750 1 - 3/4 2 - 3/4 3/4
Z 37504375625 4 - 3/8 5 - 1/8 5/8 Z 50002000750 2 3 3/4
Z 37504500625 4 - 1/2 5 - 1/4 5/8 Z 50002250750 2 - 1/4 3 - 1/4 3/4
Z 37504625625 4 - 5/8 5 - 3/8 5/8 Z 50002375750 2 - 3/8 3 - 3/8 3/4
Z 37504750625 4 - 3/4 5 - 1/2 5/8 Z 50002500750 2 - 1/2 3 - 1/2 3/4
Z 37504875625 4 - 7/8 5 - 5/8 5/8 Z 50002750750 2 - 3/4 3 - 3/4 3/4
Z 37505000625 5 5 - 3/4 5/8 Z 50003000750 3 4 3/4
Z 37505125625 5 - 1/8 5 - 7/8 5/8 Z 50003250750 3 - 1/4 4 - 1/4 3/4
Z 37505250625 5 - 1/4 6 5/8 Z 50003500750 3 - 1/2 4 - 1/2 3/4
Z 37505375625 5 - 3/8 6 - 1/8 5/8 Z 50003750750 3 - 3/4 4 - 3/4 3/4
Z 37505500625 5 - 1/2 6 - 1/4 5/8 Z 50004000750 4 5 3/4
Z 37505625625 5 - 5/8 6 - 3/8 5/8 Z 50004250750 4 - 1/4 5 - 1/4 3/4
Z 37505750625 5 - 3/4 6 - 1/2 5/8 Z 50004375750 4 - 3/8 5 - 3/8 3/4
Z 37505875625 5 - 7/8 6 - 5/8 5/8 Z 50004500750 4 - 1/2 5 - 1/2 3/4
Z 37506000625 6 6 - 3/4 5/8 Z 50004750750 4 - 3/4 5 - 3/4 3/4
Z 37506250625 6 - 1/4 7 5/8 Z 50005000750 5 6 3/4
Z 37506500625 6 - 1/2 7 - 1/4 5/8 Z 50005250750 5 - 1/4 6 - 1/4 3/4
Z 37506750625 6 - 3/4 7 - 1/2 5/8 Z 50005375750 5 - 3/8 6 - 3/8 3/4
Z 37507000625 7 7 - 3/4 5/8 Z 50005500750 5 - 1/2 6 - 1/2 3/4
Z 37507250625 7 - 1/4 8 5/8 Z 50005750750 5 - 3/4 6 - 3/4 3/4
Z 37507500625 7 - 1/2 8 - 1/4 5/8 Z 50006000750 6 7 3/4
Z 37507750625 7 - 3/4 8 - 1/2 5/8 Z 50006250750 6 - 1/4 7 - 1/4 3/4
Z 37508000625 8 8 - 3/4 5/8 Z 50006500750 6 - 1/2 7 - 1/2 3/4
Z 37508250625 8 - 1/4 9 5/8 Z 50006750750 6 - 3/4 7 - 3/4 3/4
Z 37508500625 8 - 1/2 9 - 1/4 5/8 Z 50007000750 7 8 3/4
Z 37508750625 8 - 3/4 9 - 1/2 5/8 Z 50007250750 7 - 1/4 8 - 1/4 3/4
Z 37509000625 9 9 - 3/4 5/8 Z 50007500750 7 - 1/2 8 - 1/2 3/4
Z 37509250625 9 - 1/4 10 5/8 Z 50007750750 7 - 3/4 8 - 3/4 3/4
Z 37509500625 9 - 1/2 10 - 1/4 5/8 Z 50008000750 8 9 3/4
Z 37509750625 9 - 3/4 10 - 1/2 5/8 Z 50008250750 8 - 1/4 9 - 1/4 3/4
Z 375010000625 10 10 - 3/4 5/8 Z 50008500750 8 - 1/2 9 - 1/2 3/4
Z 375010250625 10 - 1/4 11 5/8 Z 50008750750 8 - 3/4 9 - 3/4 3/4
Z 375010500625 10 - 1/2 11 - 1/4 5/8 Z 50009000750 9 10 3/4
Z 375010750625 10 - 3/4 11 - 1/2 5/8 Z 50009250750 9 - 1/4 10 - 1/4 3/4
HITECHSEALS.COM 73

1/2” Z 50009500750 9 - 1/2 10 - 1/2 3/4 5/8” Z 62508500100 8 - 1/2 9 - 3/4 1
Z 50009750750 9 - 3/4 10 - 3/4 3/4 Z 62508750100 8 - 3/4 10 1
Z 500010000750 10 11 3/4 Z 62509000100 9 10 - 1/4 1
Z 500010500750 10 - 1/2 11 - 1/2 3/4 Z 62509250100 9 - 1/4 10 - 1/2 1
Z-Seals
Z 500011000750 11 12 3/4 Z 62509500100 9 - 1/2 10 - 3/4 1

Z 500011500750 11 - 1/2 12 - 1/2 3/4 Z 62509750100 9 - 3/4 11 1
Z 500012000750 12 13 3/4 Z 625010000100 10 11 - 1/4 1
Z 500012500750 12 - 1/2 13 - 1/2 3/4 Z 625010250100 10 - 1/4 11 - 1/2 1
Z 500013000750 13 14 3/4 Z 625010500100 10 - 1/2 11 - 3/4 1
Z 500013500750 13 - 1/2 14 - 1/2 3/4 Z 625010750100 10 - 3/4 12 1
Z 500014000750 14 15 3/4 Z 625011000100 11 12 - 1/4 1
Z 500014500750 14 - 1/2 15 - 1/2 3/4 Z 625011250100 11 - 1/4 12 - 1/2 1
Z 500015000750 15 16 3/4 Z 625011500100 11 - 1/2 12 - 3/4 1
5/8” Z 62501250100 1 - 1/4 2 - 1/2 1 Z 625011750100 11 - 3/4 13 1
Z 62501375100 1 - 3/8 2 - 5/8 1 Z 625012000100 12 13 - 1/4 1
Z 62501500100 1 - 1/2 2 - 3/4 1 Z 625012250100 12 - 1/4 13 - 1/2 1
Z 62501750100 1 - 3/4 3 1 Z 625012500100 12 - 1/2 13 - 3/4 1
Z 62502000100 2 3 - 1/4 1 Z 625012750100 12 - 3/4 14 1
Z 62502250100 2 - 1/4 3 - 1/2 1 Z 625013000100 13 14 - 1/4 1
Z 62502500100 2 - 1/2 3 - 3/4 1 Z 625013250100 13 - 1/4 14 - 1/2 1
Z 62502750100 2 - 3/4 4 1 Z 625013500100 13 - 1/2 14 - 3/4 1
Z 62503000100 3 4 - 1/4 1 Z 625013750100 13 - 3/4 15 1
Z 62503250100 3 - 1/4 4 - 1/2 1 Z 625014000100 14 15 - 1/4 1
Z 62503500100 3 - 1/2 4 - 3/4 1 Z 625014250100 14 - 1/4 15 - 1/2 1
Z 62503750100 3 - 3/4 5 1 Z 625014500100 14 - 1/2 15 - 3/4 1
Z 62504000100 4 5 - 1/4 1 Z 625014750100 14 - 3/4 16 1
Z 62504250100 4 - 1/4 5 - 1/2 1 Z 625015000100 15 16 - 1/4 1
Z 62504500100 4 - 1/2 5 - 3/4 1 Z 625015500100 15 - 1/2 16 - 3/4 1
Z 62504750100 4 - 3/4 6 1 Z 625016000100 16 17 - 1/4 1
Z 62505000100 5 6 - 1/4 1 Z 625016500100 16 - 1/2 17 - 3/4 1
Z 62505250100 5 - 1/4 6 - 1/2 1 Z 625017000100 17 18 - 1/4 1
Z 62505500100 5 - 1/2 6 - 3/4 1 Z 625017500100 17 - 1/2 18 - 3/4 1
Z 62505750100 5 - 3/4 7 1 Z 625018000100 18 19 - 1/4 1
Z 62506000100 6 7 - 1/4 1 3/4” Z 75003000125 3 4 - 1/2 1 - 1/4
Z 62506250100 6 - 1/4 7 - 1/2 1 Z 75003250125 3 - 1/4 4 - 3/4 1 - 1/4
Z 62506500100 6 - 1/2 7 - 3/4 1 Z 75003500125 3 - 1/2 5 1 - 1/4
Z 62506750100 6 - 3/4 8 1 Z 75003750125 3 - 3/4 5 - 1/4 1 - 1/4
Z 62507000100 7 8 - 1/4 1 Z 75004000125 4 5 - 1/2 1 - 1/4
Z 62507250100 7 - 1/4 8 - 1/2 1 Z 75004250125 4 - 1/4 5 - 3/4 1 - 1/4
Z 62507500100 7 - 1/2 8 - 3/4 1 Z 75004500125 4 - 1/2 6 1 - 1/4
Z 62507750100 7 - 3/4 9 1 Z 75004750125 4 - 3/4 6 - 1/4 1 - 1/4
Z 62508000100 8 9 - 1/4 1 Z 75005000125 5 6 - 1/2 1 - 1/4
Z 62508250100 8 - 1/4 9 - 1/2 1 Z 75005250125 5 - 1/4 6 - 3/4 1 - 1/4
74 HITECHSEALS.COM
3/4” Z 75005500125 5 - 1/2 7 1 - 1/4 1” Z 10005000150 5 7 1 - 1/2
Z 75005750125 5 - 3/4 7 - 1/4 1 - 1/4 Z 10005500150 5 - 1/2 7 - 1/2 1 - 1/2
Z 75006000125 6 7 - 1/2 1 - 1/4 Z 10006000150 6 8 1 - 1/2
Z 75006250125 6 - 1/4 7 - 3/4 1 - 1/4 Z 10006500150 6 - 1/2 8 - 1/2 1 - 1/2
Z-Seals
Z 75006500125 6 - 1/2 8 1 - 1/4 Z 10007000150 7 9 1 - 1/2
Z 75006750125 6 - 3/4 8 - 1/4 1 - 1/4 Z 10007500150 7 - 1/2 9 - 1/2 1 - 1/2
Z 75007000125 7 8 - 1/2 1 - 1/4 Z 10008000150 8 10 1 - 1/2
Z 75007250125 7 - 1/4 8 - 3/4 1 - 1/4 Z 10008500150 8 - 1/2 10 - 1/2 1 - 1/2
Z 75007500125 7 - 1/2 9 1 - 1/4 Z 10009000150 9 11 1 - 1/2
Z 75007750125 7 - 3/4 9 - 1/4 1 - 1/4 Z 10009500150 9 - 1/2 11 - 1/2 1 - 1/2
Z 75008000125 8 9 - 1/2 1 - 1/4 Z 100010000150 10 12 1 - 1/2
Z 75008250125 8 - 1/4 9 - 3/4 1 - 1/4 Z 100010500150 10 - 1/2 12 - 1/2 1 - 1/2
Z 75008500125 8 - 1/2 10 1 - 1/4 Z 100011000150 11 13 1 - 1/2
Z 75008750125 8 - 3/4 10 - 1/4 1 - 1/4 Z 100011500150 11 - 1/2 13 - 1/2 1 - 1/2
Z 75009000125 9 10 - 1/2 1 - 1/4 Z 100012000150 12 14 1 - 1/2
Z 75009250125 9 - 1/4 10 - 3/4 1 - 1/4 Z 100012500150 12 - 1/2 14 - 1/2 1 - 1/2
Z 75009500125 9 - 1/2 11 1 - 1/4 Z 100013000150 13 15 1 - 1/2
Z 75009750125 9 - 3/4 11 - 1/4 1 - 1/4 Z 100013500150 13 - 1/2 15 - 1/2 1 - 1/2
Z 750010000125 10 11 - 1/2 1 - 1/4 Z 100014000150 14 16 1 - 1/2
Z 750010500125 10 - 1/2 12 1 - 1/4 Z 100014500150 14 - 1/2 16 - 1/2 1 - 1/2
Z 750011000125 11 12 - 1/2 1 - 1/4 Z 100015000150 15 17 1 - 1/2
Z 750011500125 11 - 1/2 13 1 - 1/4 Z 100015500150 15 - 1/2 17 - 1/2 1 - 1/2
Z 750012000125 12 13 - 1/2 1 - 1/4 Z 100016000150 16 18 1 - 1/2
Z 750012500125 12 - 1/2 14 1 - 1/4 Z 100016500150 16 - 1/2 18 - 1/2 1 - 1/2
Z 750013000125 13 14 - 1/2 1 - 1/4 Z 100017000150 17 19 1 - 1/2
Z 750013500125 13 - 1/2 15 1 - 1/4 Z 100017500150 17 - 1/2 19 - 1/2 1 - 1/2
Z 750014000125 14 15 - 1/2 1 - 1/4 Z 100018000150 18 20 1 - 1/2
Z 750014500125 14 - 1/2 16 1 - 1/4 Z 100018500150 18 - 1/2 20 - 1/2 1 - 1/2
Z 750015000125 15 16 - 1/2 1 - 1/4 Z 100019000150 19 21 1 - 1/2
Z 750015500125 15 - 1/2 17 1 - 1/4 Z 100019500150 19 - 1/2 21 - 1/2 1 - 1/2
Z 750016000125 16 17 - 1/2 1 - 1/4 Z 100020000150 20 22 1 - 1/2
Z 750016500125 16 - 1/2 18 1 - 1/4 Z 100022000150 22 24 1 - 1/2
Z 750017000125 17 18 - 1/2 1 - 1/4 Z 100024000150 24 26 1 - 1/2
Z 750017500125 17 - 1/2 19 1 - 1/4 Z 100026000150 26 28 1 - 1/2
Z 750018000125 18 19 - 1/2 1 - 1/4 Z 100028000150 28 30 1 - 1/2
Z 750018500125 18 - 1/2 20 1 - 1/4 Z 100030000150 30 32 1 - 1/2
Z 750019000125 19 20 - 1/2 1 - 1/4 Z 100032000150 32 34 1 - 1/2
Z 750019500125 19 - 1/2 21 1 - 1/4
Z 750020000125 20 21 - 1/2 1 - 1/4
1” Z 10003000150 3 5 1 - 1/2
Z 10003500150 3 - 1/2 5 - 1/2 1 - 1/2
Z 10004000150 4 6 1 - 1/2
Z 10004500150 4 - 1/2 6 - 1/2 1 - 1/2
HITECHSEALS.COM 75
Homogenous U-Cups Imperial Seals

Honogenous U-Cups
Chloroprene -40°C to 121°C
Product Description
Homogenous U-cups (HU), also known as block vees, are non-loaded U-cups. They are a popular seal in low pressure appli-
cations where a low friction seal is beneficial. HU seals are most commonly used in pneumatic applications as a rod or piston
seal. The design is suited for situations where space is limited. HU seals are typically made from an 80 durometer nitrile;
however, they are also available in Viton™/fluorocarbon, chloroprene, and other homogenous materials.
As pressure is applied to the HU, there is an increase in sealing force until the seal reaches the maximum pressure it is able to
handle. These seals can withstand a pressure rating of up to 500 PSI. Contact us if your application requires a higher pressure
rating.
Part Numbers:
HU ___ -HU___
______
- ___ ___ ___
___ ___ ______
______
___ ___
______
______ ___
___ ___
___ ___ * Height is only listed if the axial height is
greater than the cross-section.
I.D. O.D. Height*

Blank - Nitrile
V - Viton™
N - Neoprene
Example: HU 0437 0688 - Homogenous, U-Cup, Nitrile, 7/16” Nom. I.D., 11/16” Nom. O.D.
76 HITECHSEALS.COM
Imperial Seals Homogenous U-Cups
C
Homogenous U-Cups
C
D E A
A B D
A B D E
Seal Groove Shaft Throat Ø Seal Bore Gland Piston Ø

O.D. Dim. Tol. Tol. Dim. Tol. O.D. Dim. Tol. Tol. Dim. Tol.
0.125 + 0.000 + 0.000 + 0.002 0.250 + 0.003 + 0.002 OD + 0.000
Nom ID ID + 0.001 Nom OD
- 1.500 - 0.001 - 0.001 - 0.000 - 2.375 - 0.000 - 0.000 - 0.002 - 0.001
1.506 + 0.000 + 0.000 + 0.002 2.437 + 0.004 + 0.003 OD + 0.000
“ ID + 0.001 “
- 2.500 - 0.002 - 0.001 - 0.000 - 4.750 - 0.000 - 0.000 - 0.002 - 0.002
2.506 + 0.000 + 0.000 + 0.003 5.000 + 0.004 + 0.003 OD + 0.000
“ ID + 0.001 “
- 8.000 - 0.003 - 0.002 - 0.000 - 7.750 - 0.000 - 0.000 - 0.003 - 0.003
+ 0.000 + 0.000 + 0.004 + 0.005 + 0.003 OD + 0.000
8.250+ “ ID + 0.002 8.000+ “
- 0.004 - 0.003 - 0.000 - 0.000 - 0.000 - 0.003 - 0.004
The Groove Width (C) is the seal height + 1/32nd ± 0.010
Nominal Nominal
A D A D
Shaft/Piston Bore/Rod Shaft/Piston Bore/Rod
Part Number Groove Dia. Groove Dia. C/S Part Number Groove Dia. Groove Dia. C/S
HU 01250250 1/8 1/4 1/16 HU 02500562 1/4 9/16 5/32
HU 01250312 1/8 5/16 3/32 HU 02500625 1/4 5/8 3/16
HU 01250375 1/8 3/8 1/8 HU 02500750 1/4 3/4 1/4
HU 01250500 1/8 1/2 3/16 HU 03120437 5/16 7/16 1/16
HU 01560281 5/32 9/32 1/16 HU 03120500 5/16 1/2 3/32
HU 01870312 3/16 5/16 1/16 HU 03120562 5/16 9/16 1/8
HU 01870375 3/16 3/8 3/32 HU 03120687 5/16 11/16 3/16
HU 01870437 3/16 7/16 1/8 HU 03120812 5/16 13/16 1/4
HU 01870562 3/16 9/16 3/16 HU 03750500 3/8 1/2 1/16
HU 02180343 7/32 11/32 1/16 HU 03750562 3/8 9/16 3/32
HU 02180406 7/32 13/32 3/32 HU 03750625 3/8 5/8 1/8
HU 02500375 1/4 3/8 1/16 HU 03750750 3/8 3/4 3/16
HU 02500437 1/4 7/16 3/32 HU 03750875 3/8 7/8 1/4
HU 02500500 1/4 1/2 1/8 HU 04370625 7/16 5/8 3/32
HITECHSEALS.COM 77
Homogenous U-Cups Imperial Seals
Nominal Nominal
A D A D
Homogenous U-Cups

Part Number Groove Dia. Groove Dia. C/S Part Number Groove Dia. Groove Dia. C/S
HU 04370812 7/16 13/16 3/16 HU 11871687 1 - 3/16 1 -11/16 1/4
HU 04370937 7/16 15/16 1/4 HU 12501500 1 - 1/4 1 - 1/2 1/8
HU 05000625 1/2 5/8 1/16 HU 12501562 1 - 1/4 1 - 9/16 5/32
HU 05000687 1/2 11/16 3/32 HU 12501625 1 - 1/4 1 - 5/8 3/16
HU 05000750 1/2 3/4 1/8 HU 12501750 1 - 1/4 1 - 3/4 1/4
HU 05000812 1/2 13/16 5/32 HU 13121562 1 - 5/16 1 - 9/16 1/8
HU 05000875 1/2 7/8 3/16 HU 13121625 1 - 5/16 1 - 5/8 5/32
HU 05001000 1/2 1 1/4 HU 13751625 1 - 3/8 1 - 5/8 1/8
HU 05620750 9/16 3/4 3/32 HU 13751688 1 - 3/8 1 -11/16 5/32
HU 05620813 9/16 13/16 1/8 HU 13751750 1 - 3/8 1 - 3/4 3/16
HU 05621062 9/16 1 - 1/16 1/4 HU 14371750 1 - 7/16 1 - 3/4 5/32
HU 05930844 19/32 27/32 1/8 HU 15001750 1 - 1/2 1 - 3/4 1/8
HU 06250813 5/8 13/16 3/32 HU 15001812 1 - 1/2 1 -13/16 5/32
HU 06250875 5/8 7/8 1/8 HU 15001875 1 - 1/2 1 - 7/8 3/16
HU 06251000 5/8 1 3/16 HU 16251812 1 - 5/8 1 -13/16 3/32
HU 06251125 5/8 1 - 1/8 1/4 HU 16251875 1 - 5/8 1 - 7/8 1/8
HU 06870875 11/16 7/8 3/32 HU 16251937 1 - 5/8 1 -15/16 5/32
HU 06870937 11/16 15/16 1/8 HU 16252000 1 - 5/8 2 3/16
HU 06871062 11/16 1 - 1/16 3/16 HU 17502000 1 - 3/4 2 1/8
HU 06871187 11/16 1 - 3/16 1/4 HU 17502062 1 - 3/4 2 - 1/16 5/32
HU 07500937 3/4 15/16 3/32 HU 17502125 1 - 3/4 2 - 1/8 3/16
HU 07501000 3/4 1 1/8 HU 18752250 1 - 7/8 2 - 1/4 3/16
HU 07501125 3/4 1 - 1/8 3/16 HU 20002250 2 2 - 1/4 1/8
HU 07501250 3/4 1 - 1/4 1/4 HU 20002375 2 2 - 3/8 3/16
HU 08121000 13/16 1 3/32 HU 21252500 2 - 1/8 2 - 1/2 3/16
HU 08121062 13/16 1 - 1/16 1/8 HU 22502625 2 - 1/4 2 - 5/8 3/16
HU 08121125 13/16 1 - 1/8 5/32 HU 23752750 2 - 3/8 2 - 3/4 3/16
HU 08121312 13/16 1 - 5/16 1/4 HU 25002875 2 - 1/2 2 - 7/8 3/16
HU 08751000 7/8 1 1/16 HU 25002937 2 - 1/2 2 -15/16 7/32
HU 08751062 7/8 1 - 1/16 3/32 HU 25623000 2 - 9/16 3 7/32
HU 08751125 7/8 1 - 1/8 1/8 HU 26253000 2 - 5/8 3 3/16
HU 08751187 7/8 1 - 3/16 5/32 HU 26873125 2 -11/16 3 - 1/8 7/32
HU 08751250 7/8 1 - 1/4 3/16 HU 27503125 2 - 3/4 3 - 1/8 3/16
HU 08751375 7/8 1 - 3/8 1/4 HU 27503187 2 - 3/4 3 - 3/16 7/32
HU 09371187 15/16 1 - 3/16 1/8 HU 28123250 2 -13/16 3 - 1/4 7/32
HU 09371250 15/16 1 - 1/4 5/32 HU 28753250 2 - 7/8 3 - 1/4 3/16
HU 09371437 15/16 1 - 7/16 1/4 HU 30003375 3 3 - 3/8 3/16
HU 10001187 1 1 - 3/16 3/32 HU 30003437 3 3 - 7/16 7/32
HU 10001250 1 1 - 1/4 1/8 HU 30623500 3 - 1/16 3 - 1/2 7/32
HU 10001312 1 1 - 5/16 5/32 HU 31253500 3 - 1/8 3 - 1/2 3/16
HU 10001375 1 1 - 3/8 3/16 HU 32503625 3 - 1/4 3 - 5/8 3/16
HU 10001500 1 1 - 1/2 1/4 HU 33123750 3 - 5/16 3 - 3/4 7/32
HU 10621375 1 - 1/16 1 - 3/8 5/32 HU 33753750 3 - 3/8 3 - 3/4 3/16
HU 10621562 1 - 1/16 1 - 9/16 1/4 HU 35003875 3 - 1/2 3 - 7/8 3/16
HU 11251375 1 - 1/8 1 - 3/8 1/8 HU 35624000 3 - 9/16 4 7/32
HU 11251437 1 - 1/8 1 - 7/16 5/32 HU 36254000 3 - 5/8 4 3/16
HU 11251500 1 - 1/8 1 - 1/2 3/16 HU 47505000 4 - 3/4 5 1/8
HU 11251625 1 - 1/8 1 - 5/8 1/4 HU 62506500 6 - 1/4 6 - 1/2 1/8
HU 11871437 1 - 3/16 1 - 7/16 1/8
78 HITECHSEALS.COM
Imperial Seals Urethane U-Cups
Material Temp. Range
Urethane U-Cups
Rod (RO) Rod (RO) Symmetrical (SY) Piston (PI)
Standard Lip (STD) Double Lip (DL)
Product Description
Urethane U-cups are designed to provide an excellent heavy duty seal for both piston and rod applications. Urethane U-cups
work in both static and dynamic applications.
The non-symmetric urethane U-cups provide customers with additional benefits including reduced seal movement, increased
stability in static applications, and protection of the dynamic lip during installation. Rod styles provide improved sealability
on the I.D., while piston styles provide improved sealability on the O.D.
Part Numbers:
___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
C/S I.D. Height STD - Standard Lip Style (Rod)

RO - Rod DL - Double Lip Style (Rod)
SY - Symmetrical
PI - Piston
Example: RO 1870 0625 375 DL - Rod Style, Double Lip Seal, 3/16” C/S, 5/8” I.D., 3/8” Height
HITECHSEALS.COM 79
Urethane U-Cups Imperial Seals
Rod Style C
Urethane U-Cups
Urethane U-cups fit into standard and deep loaded U-cup glands. For
groove dimensions please reference the loaded U-cup section, which
starts on page 39. * Can be used for RO and SY
A C A C
Shaft Groove Shaft Groove
Part Number C/S Diameter Width Part Number C/S Diameter Width
RO 12500375187DL 1/8 3/8 3/16 RO 18701750250DL 3/16 1 - 3/4 1/4
RO 12500500187STD 1/8 1/2 3/16 RO 18701750312DL 3/16 1 - 3/4 5/16
RO 12500625187DL 1/8 5/8 3/16 RO 18701750375STD 3/16 1 - 3/4 3/8
RO 12500625250STD 1/8 5/8 1/4 RO 18701750375DL 3/16 1 - 3/4 3/8
RO 12500750187DL 1/8 3/4 3/16 RO 18701875375DL 3/16 1 - 7/8 3/8
RO 12500750250STD 1/8 3/4 1/4 RO 18702000187DL 3/16 2 3/16
RO 12501000187DL 1/8 1 3/16 RO 18702000312STD 3/16 2 5/16
RO 12501000250STD 1/8 1 1/4 RO 18702000375DL 3/16 2 3/8
RO 12501000250DL 1/8 1 1/4 RO 18702125375DL 3/16 2 - 1/8 3/8
RO 12501062187DL 1/8 1 - 1/16 3/16 RO 18702250312STD 3/16 2 - 1/4 5/16
RO 12501062250DL 1/8 1 - 1/16 1/4 RO 18702250312DL 3/16 2 - 1/4 5/16
RO 12501125187DL 1/8 1 - 1/8 3/16 RO 18702500312STD 3/16 2 - 1/2 5/16
RO 12501125250DL 1/8 1 - 1/8 1/4 RO 18702500375DL 3/16 2 - 1/2 3/8
RO 12501250187DL 1/8 1 - 1/4 3/16 RO 18703000375DL 3/16 3 3/8
RO 12501375250DL 1/8 1 - 3/8 1/4 RO 18703500375DL 3/16 3 - 1/2 3/8
RO 12501500250DL 1/8 1 - 1/2 1/4 RO 18704000375DL 3/16 4 3/8
RO 12501625250DL 1/8 1 - 5/8 1/4 RO 18704500375DL 3/16 4 - 1/2 3/8
RO 12501750250DL 1/8 1 - 3/4 1/4 RO 18705000375DL 3/16 5 3/8
RO 15601500312DL 5/32 1 - 1/2 5/16 RO 25001000250STD 1/4 1 1/4
RO 18700500312DL 3/16 1/2 5/16 RO 25001125375STD 1/4 1 - 1/8 3/8
RO 18700625250STD 3/16 5/8 1/4 RO 25001125375DL 1/4 1 - 1/8 3/8
RO 18700625375DL 3/16 5/8 3/8 RO 25001375375DL 1/4 1 - 3/8 3/8
RO 18700750312DL 3/16 3/4 5/16 RO 25001500312STD 1/4 1 - 1/2 5/16
RO 18700875312DL 3/16 7/8 5/16 RO 25001500375DL 1/4 1 - 1/2 3/8
RO 18701125312STD 3/16 1 - 1/8 5/16 RO 25001750375STD 1/4 1 - 3/4 3/8
RO 18701125312DL 3/16 1 - 1/8 5/16 RO 25001750375DL 1/4 1 - 3/4 3/8
RO 18701250250STD 3/16 1 - 1/4 1/4 RO 25001875375DL 1/4 1 - 7/8 3/8
RO 18701250250DL 3/16 1 - 1/4 1/4 RO 25002000375STD 1/4 2 3/8
RO 18701250312STD 3/16 1 - 1/4 5/16 RO 25002000375DL 1/4 2 3/8
RO 18701250375DL 3/16 1 - 1/4 3/8 RO 25002250375DL 1/4 2 - 1/4 3/8
RO 18701375312DL 3/16 1 - 3/8 5/16 RO 25002500375STD 1/4 2 - 1/2 3/8
RO 18701500250DL 3/16 1 - 1/2 1/4 RO 25002500375DL 1/4 2 - 1/2 3/8
RO 18701500250DL 3/16 1 - 1/2 1/4 RO 25002625375DL 1/4 2 - 5/8 3/8
80 HITECHSEALS.COM
Imperial Seals Urethane U-Cups
Rod Style
A C A C
Shaft Groove Shaft Groove
RO 18701500312STD 3/16 1 - 1/2 5/16 RO 25002625500DL 1/4 2 - 5/8 1/2
Urethane U-Cups
RO 18701500312DL 3/16 1 - 1/2 5/16 RO 25002750375DL 1/4 2 - 3/4 3/8
RO 18701500375DL 3/16 1 - 1/2 3/8 RO 25003000375STD 1/4 3 3/8
RO 25003500375STD 1/4 3 - 1/2 3/8 RO 31205250625DL 5/16 5 - 1/4 5/8
RO 25004000562DL 1/4 4 9/16 RO 31205750625STD 5/16 5 - 3/4 5/8
RO 25004500375DL 1/4 4 - 1/2 3/8 RO 37502000625DL 3/8 2 5/8
RO 25004500562STD 1/4 4 - 1/2 9/16 RO 37502500625DL 3/8 2 - 1/2 5/8
RO 25005500562STD 1/4 5 - 1/2 9/16 RO 37503000500STD 3/8 3 1/2
RO 31202000500DL 5/16 2 1/2 RO 37503000625DL 3/8 3 5/8
RO 31202375375STD 5/16 2 - 3/8 3/8 RO 37503500500DL 3/8 3 - 1/2 1/2
RO 31202500500DL 5/16 2 - 1/2 1/2 RO 37503500625STD 3/8 3 - 1/2 5/8
RO 31202625500DL 5/16 2 - 5/8 1/2 RO 37503500625DL 3/8 3 - 1/2 5/8
RO 31202750625DL 5/16 2 - 3/4 5/8 RO 37504000625DL 3/8 4 5/8
RO 31203000500DL 5/16 3 1/2 RO 37505000500DL 3/8 5 1/2
RO 31203375562DL 5/16 3 - 3/8 9/16 RO 37506750625DL 3/8 6 - 3/4 5/8
RO 31203500500DL 5/16 3 - 1/2 1/2
Symmetrical Style
* Can be used in place of an RO and PI
A C A C
Shaft/Groove Groove Shaft/Groove Groove
SY 12500312250 1/8 5/16 1/4 SY 25001500375 1/4 1 - 1/2 3/8
SY 12500500187 1/8 1/2 3/16 SY 25002000375 1/4 2 3/8
SY 12500750250 1/8 3/4 1/4 SY 25002000562 1/4 2 9/16
SY 12500875250 1/8 7/8 1/4 SY 25002375375 1/4 2 - 3/8 3/8
SY 15601375250 5/32 1 - 3/8 1/4 SY 25004750625 1/4 4 - 3/4 5/8
SY 18700625312 3/16 5/8 5/16 SY 25005500750 1/4 5 - 1/2 3/4
SY 18700750312 3/16 3/4 5/16
SY 31202625625 5/16 2 - 5/8 5/8
SY 18700875312 3/16 7/8 5/16
SY 31203750625 5/16 3 - 3/4 5/8
SY 18701000250 3/16 1 1/4
SY 31203750875 5/16 3 - 3/4 7/8
SY 18701125312 3/16 1 - 1/8 5/16
SY 31204750875 5/16 4 - 3/4 7/8
SY 18701500312 3/16 1 - 1/2 5/16
SY 31205750875 5/16 5 - 3/4 7/8
SY 18702125375 3/16 2 - 1/8 3/8
SY 31206750625 5/16 6 - 3/4 5/8
SY 18705125312 3/16 5 - 1/8 5/16
SY 21800500250 7/32 1/2 1/4 SY 37502750375 3/8 2 - 3/4 3/8
SY 21802500375 7/32 2 - 1/2 3/8 SY 37502750625 3/8 2 - 3/4 5/8
SY 25000812375 1/4 13/16 3/8 SY 37503500625 3/8 3 - 1/2 5/8
SY 25000937375 1/4 15/16 3/8 SY 37507500562 3/8 7 - 1/2 9/16
SY 25001125375 1/4 1 - 1/8 3/8 SY 43703875750 7/16 3 - 7/8 3/4
SY 25001250375 1/4 1 - 1/4 3/8 SY 50007875100 1/2 7 - 7/8 1
HITECHSEALS.COM 81
Urethane U-Cups Imperial Seals
Piston Style
Piston Style C
Urethane U-Cups
Urethane U-cups fit into standard and deep loaded U-cup glands. For
groove dimensions please reference the loaded U-cup section, which
starts on page 39. * Can be used for PI and SY
A C A C
PI 18700875312 3/16 7/8 5/16 PI 25005500375 1/4 5 - 1/2 3/8
PI 18701125312 3/16 1 - 1/8 5/16 PI 31201375500 5/16 1 - 3/8 1/2
PI 18701375312 3/16 1 - 3/8 5/16 PI 31201875500 5/16 1 - 7/8 1/2
PI 18701625312 3/16 1 - 5/8 5/16 PI 31202375500 5/16 2 - 3/8 1/2
PI 18702125312 3/16 2 - 1/8 5/16 PI 31202875500 5/16 2 - 7/8 1/2
PI 25000750375 1/4 3/4 3/8 PI 31203375500 5/16 3 - 3/8 1/2
PI 25001000375 1/4 1 3/8 PI 31203875500 5/16 3 - 7/8 1/2
PI 25001250375 1/4 1 - 1/4 3/8 PI 31205375500 5/16 5 - 3/8 1/2
PI 25001500375 1/4 1 - 1/2 3/8 PI 37501750625 3/8 1 - 3/4 5/8
PI 25001750375 1/4 1 - 3/4 3/8 PI 37502250625 3/8 2 - 1/4 5/8
PI 25002000375 1/4 2 3/8 PI 37502500625 3/8 2 - 1/2 5/8
PI 25002250375 1/4 2 - 1/4 3/8 PI 37502750625 3/8 2 - 3/4 5/8
PI 25002500375 1/4 2 - 1/2 3/8 PI 37503250625 3/8 3 - 1/4 5/8
PI 25002750375 1/4 2 - 3/4 3/8 PI 37503750625 3/8 3 - 3/4 5/8
PI 25003000375 1/4 3 3/8 PI 37504250625 3/8 4 - 1/4 5/8
PI 25003250375 1/4 3 - 1/4 3/8 PI 37504750625 3/8 4 - 3/4 5/8
PI 25003500375 1/4 3 - 1/2 3/8 PI 37505250625 3/8 5 - 1/4 5/8
PI 25004000375 1/4 4 3/8 PI 37505750625 3/8 5 - 3/4 5/8
PI 25004500375 1/4 4 - 1/2 3/8 PI 37506250625 3/8 6 - 1/4 5/8
PI 25005000375 1/4 5 3/8 PI 37507250625 3/8 7 - 1/4 5/8
For custom size urethane U-cups, please contact a Hi-Tech Seals representative.
82 HITECHSEALS.COM
Imperial Seals Engineered Thermoplastic Seals
Engineered Thermoplastic Seals

Carbon/Graphite filled PTFE -268°C to 288°C
Glass/Moly filled PTFE -268°C to 288°C
Bronze filled PTFE -268°C to 288°C
Carbon filled PTFE -268°C to 288°C
UHMW-PE -250°C to 80°C
Product Description
Engineered thermoplastic seals (ETS) are a lip seal that incorporates a metal or composite spring into the seal design. The
spring energizes the seal lip against the mating hardware, creating a seal capable of compensating for movement in a dynamic
application. They are used in single acting dynamic applications and should be oriented with the spring towards the pressure
side.
ETS are primarily used in extreme environments where a standard moulded elastomers or thermoplastics cannot meet
the application requirements due to the material limitations. As ETS are designed to meet varying applications and high-
performance requirements, Hi-Tech Seals mainly stocks custom design seals. For support designing an ETS to meet the
needs of your applications, contact our engineering department.
Part Numbers:
SS ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height Material

M - if Metric
Materials
Blank - Glass/Moly filled PTFE TCF - Carbon Fiber filled PTFE
NYLON - Nylon TCG - Carbon Graphite filled PTFE
UHMW - UHMW TBF - Bronze filled PTFE
PEEK - PEEK
HITECHSEALS.COM 83
Engineered Thermoplastic Seals Imperial Seals
Designing an Engineered Thermoplastic Seal

1. Select a dynamic lip configuration that suits application needs:
Seal Type Advantages Disadvantages

• Low wear rate
• Preferred design for oscillatory, slow rotary applications • Should not be used for dynamic sealing of abrasive media
• Radius lip reduces probability of seal lip damage during • May weep in high speed reciprocating applications due
• installation • to seal lip hydroplaning
A
• Improved sealability
• Should not be used for dynamic sealing of abrasive media
• Prefered design for dynamic sealing of gas and vapor
• May weep in high speed reciprocating applications due
• Beveled lip reduces probability of seal lip damage during
• to seal lip hydroplaning
• installation
B
• Locks seal into reduced glands

• Requires good lead-in chamfer if hardware is installed
• Reduced probability of seal lip hydroplaning
• lip first
• Low wear rate
• Possible weepage of light fluids or gases
• Good excluder for debris and contaminants
D
• Low wear rate

• Redundant seal lip design
• Trapped fluid between contact points provides added
• lubrication to seal
S

• Improved sealability over D style lip
lip first
• Preferred lip design for dynamic sealing of abrasive media
• Lip design must be used in combination with other
• lip style
X
• High load of helical wound spring improves sealability

• Suitable for sealing cryogenic gases and fluids
• Radius lip reduces probability of seal lip damage
• during installation
H

• High load of helical wound spring improves sealability
lip first
• Preferred lip design for dynamic sealing of abrasive media
• Lip design must be used in combination with radius
• lip style
W
Images are depicted with a bronze filled PTFE material.
2. Determine if the same sealing lip is appropriate for the static lip. Engineered Thermoplastic Seals do not have to be symmetrical.
84 HITECHSEALS.COM
Imperial Seals Engineered Thermoplastic Seal

Jacket Materials Temp. Range
3. When determining which jacket material is required for Virgin PTFE -268°C to 232°C
your application, variables to consider include: Carbon/Graphite filled PTFE -268°C to 288°C
Variables to consider include: Glass,/Moly filled PTFE -268°C to 288°C
• Temperature Bronze filled PTFE -268°C to 288°C
• Chemical
PEEK -70 °C to 260°C
• Pressure
• Velocity
UHMWPE -250°C to 80°C
• Cost
4. When manufacturing ETS we typically use cantilever springs, though helical and slanted coil springs are available upon
request.
Cantilever Spring (V-Spring)
A cantilever spring is recommended for dynamic, medium load applications where low friction is
desired. The V-shape spring provides constant compression load and is further energized by system
pressure.
Helical Wound Spring
A helical wound spring is made from a metal ribbon, which is coiled into a helix. The spring com-
presses radially producing a very high load versus deflection. The helical wound spring is preferred
for static applications or in applications where sealability is of a higher concern than friction.
Slanted Coil Spring
A slanted coil spring, also known as a canted coil spring, is manufactured from a round wire that is
coiled and angled. The process creates a compression force in the radial direction. The canted coil
design is suited for dynamic applications where low friction is critical.
5. The most common spring materials is stainless steel; however, Hastelloy®, Inconel, and Elgilogy are available for applica-
tions that require additional corrosion resistance.
HITECHSEALS.COM 85
Buffer Seals Imperial Seals

15% Glass, 5% Moly filled PTFE -268°C to 288°C

Buffer Seals

R (TFE) RM RB RS
Caterpillar Equivalent Styles
Solid (One )Piece CAT R (Two Piece)
Product Description
We primarily stock rod buffer seals, though piston buffer seals are available upon request. Buffer seals are commonly used
in combination with another rod or piston seal, typically a U-cup style seal. Buffer seals in rod applications are designed to
absorb pressure fluctuations when working under high-load conditions, this increases the lifespan of a rod seal.
Part Numbers:
BUF - ___ ___ ___ ___ ___ ___ ___
Style Descriptor
Rod Diameter
Example: BUF 1250TFE2 - R Style Buffer, 40% Bronze Filled PTFE, Nitrile loader, 1.250” Rod, N70 126 O-Ring
86 HITECHSEALS.COM
Imperial Seals Buffer Seals
Design Information
C
R 0.015” - 0.035”
E
D
Buffer Seals
A B
E is the maximum extrusion gap, which is

the largest gap permitted by tolerances and
eccentricity.
Rendering represents an R-Style Buffer Seal.
Style: Description Common Material(s)

R Traditional, field proven design. Often used as a low friction rod seal. 40% Bronze PTFE, Nitrile Loader
RM Easy to install buffer seal. Split anti-extrusion ring. Ideal for small diameters. High Temperature Urethane, Nylon Back-Up
RB Urethane cup style buffer with solid endless anti-extrusion ring. High Temperature Urethane, Nylon Back-Up
RS Heavy duty. Ideal for large rod heavy duty service. 40% Bronze PTFE, Nitrile Loader
Solid One piece CAT Buffer Seal Urethane
CAT R Two piece CAT Buffer Seal 40% Bronze PTFE, Nitrile Loader
Information is intended as a guide only; contact a Hi-Tech Seals representative when designing a new application or altering a current application.
HITECHSEALS.COM 87
+0.010
Buffer Seals -0.000

Imperial Seals
R-Style
Max. Diametrical Clearance (E)

O-Ring C/S @1000 PSI @3000 PSI @5000 PSI Above 5000 PSI
3/32 0.018 0.016 0.008 Consult HTS
Buffer Seals
1/8 0.024 0.018 0.009 Consult HTS

3/16 0.030 0.024 0.018 Consult HTS
1/4 0.040 0.030 0.024 Consult HTS
A B C D
Part Shaft O-Ring Groove Groove Width Groove
Number Diameter Tol. C/S Diameter Tol. +0.010/-0.000 Depth
BUF 1000TFE 1.000 +0.000/-0.002 3/32 1.298 +0.003/-0.000 0.126 0.149
BUF 1000TFE1 1.000 +0.000/-0.003 1/8 1.424 +0.004/-0.000 0.166 0.212
BUF 1250TFE1 1.250 +0.000/-0.002 3/32 1.548 +0.003/-0.000 0.126 0.149
BUF 1250TFE2 1.250 +0.000/-0.003 1/8 1.674 +0.004/-0.000 0.166 0.212
BUF 1500TFE1 1.500 +0.000/-0.002 3/32 1.798 +0.003/-0.000 0.126 0.149
BUF 1500TFE 1.500 +0.000/-0.003 1/8 1.924 +0.004/-0.000 0.166 0.212
BUF 1500TFE2 1.500 +0.000/-0.004 3/16 2.116 +0.005/-0.000 0.247 0.308
BUF 1750TFE 1.750 +0.000/-0.003 1/8 2.174 +0.004/-0.000 0.166 0.212
BUF 1750TFE1 1.750 +0.000/-0.004 3/16 2.366 +0.005/-0.000 0.247 0.308
BUF 2000TFE 2.000 +0.000/-0.003 1/8 2.424 +0.004/-0.000 0.166 0.212
BUF 2000TFE1 2.000 +0.000/-0.004 3/16 2.616 +0.005/-0.000 0.247 0.308
BUF 2250TFE 2.250 +0.000/-0.003 1/8 2.674 +0.004/-0.000 0.166 0.212
BUF 2250TFE1 2.250 +0.000/-0.004 3/16 2.866 +0.005/-0.000 0.247 0.308
BUF 2500TFE1 2.500 +0.000/-0.003 1/8 2.924 +0.004/-0.000 0.166 0.212
BUF 2500TFE 2.500 +0.000/-0.004 3/16 3.116 +0.005/-0.000 0.247 0.308
BUF 2750TFE1 2.750 +0.000/-0.003 1/8 3.174 +0.004/-0.000 0.166 0.212
BUF 2750TFE 2.750 +0.000/-0.004 3/16 3.366 +0.005/-0.000 0.247 0.308
BUF 3000TFE1 3.000 +0.000/-0.003 1/8 3.424 +0.004/-0.000 0.166 0.212
BUF 3000TFE 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
BUF 3250TFE 3.250 +0.000/-0.004 3/16 3.866 +0.005/-0.000 0.247 0.308
BUF 3500TFE 3.500 +0.000/-0.004 3/16 4.116 +0.005/-0.000 0.247 0.308
BUF 3750TFE 3.750 +0.000/-0.004 3/16 4.366 +0.005/-0.000 0.247 0.308
BUF 4000TFE1 4.000 +0.000/-0.004 3/16 4.616 +0.005/-0.000 0.247 0.308
BUF 4000TFE 4.000 +0.000/-0.005 1/4 4.830 +0.006/-0.000 0.320 0.415
BUF 4250TFE 4.250 +0.000/-0.004 3/16 4.866 +0.005/-0.000 0.247 0.308
BUF 4250TFE1 4.250 +0.000/-0.005 1/4 5.080 +0.006/-0.000 0.320 0.415
BUF 4500TFE 4.500 +0.000/-0.004 3/16 5.116 +0.005/-0.000 0.247 0.308
BUF 4500TFE1 4.500 +0.000/-0.005 1/4 5.330 +0.006/-0.000 0.320 0.415
88 HITECHSEALS.COM
R-Style
+0.010
-0.000
Buffer Seals
A B C D
BUF 4750TFE 4.750 +0.000/-0.004 3/16 5.366 +0.005/-0.000 0.247 0.308
BUF 4750TFE1 4.750 +0.000/-0.005 1/4 5.580 +0.006/-0.000 0.320 0.415
BUF 5000TFE 5.000 +0.000/-0.004 3/16 5.616 +0.005/-0.000 0.247 0.308
BUF 5000TFE1 5.000 +0.000/-0.005 1/4 5.830 +0.006/-0.000 0.320 0.415
BUF 5250TFE 5.250 +0.000/-0.004 3/16 5.866 +0.005/-0.000 0.247 0.308
BUF 5250TFE1 5.250 +0.000/-0.005 1/4 6.080 +0.006/-0.000 0.320 0.415
BUF 5500TFE 5.500 +0.000/-0.004 3/16 6.116 +0.005/-0.000 0.247 0.308
BUF 5500TFE 5.500 +0.000/-0.005 1/4 6.330 +0.006/-0.000 0.320 0.415
BUF 5750TFE 5.750 +0.000/-0.004 3/16 6.366 +0.005/-0.000 0.247 0.308
BUF 5750TFE1 5.750 +0.000/-0.005 1/4 6.580 +0.006/-0.000 0.320 0.415
BUF 6000TFE 6.000 +0.000/-0.004 3/16 6.616 +0.005/-0.000 0.247 0.308
BUF 6000TFE1 6.000 +0.000/-0.005 1/4 6.830 +0.006/-0.000 0.320 0.415
BUF 6250TFE 6.250 +0.000/-0.004 3/16 6.866 +0.005/-0.000 0.247 0.308
BUF 6250TFE1 6.250 +0.000/-0.005 1/4 7.080 +0.006/-0.000 0.320 0.415
BUF 6500TFE 6.500 +0.000/-0.004 3/16 7.116 +0.005/-0.000 0.247 0.308
BUF 6500TFE1 6.500 +0.000/-0.005 1/4 7.330 +0.006/-0.000 0.320 0.415
BUF 6750TFE 6.750 +0.000/-0.004 3/16 7.366 +0.005/-0.000 0.247 0.308
BUF 6750TFE1 6.750 +0.000/-0.005 1/4 7.580 +0.006/-0.000 0.320 0.415
BUF 7000TFE 7.000 +0.000/-0.004 3/16 7.616 +0.005/-0.000 0.247 0.308
BUF 7000TFE1 7.000 +0.000/-0.005 1/4 7.830 +0.006/-0.000 0.320 0.415
BUF 7250TFE 7.250 +0.000/-0.004 3/16 7.866 +0.005/-0.000 0.247 0.308
BUF 7250TFE1 7.250 +0.000/-0.005 1/4 8.080 +0.006/-0.000 0.320 0.415
BUF 7500TFE 7.500 +0.000/-0.004 3/16 8.116 +0.005/-0.000 0.247 0.308
BUF 7500TFE1 7.500 +0.000/-0.005 1/4 8.330 +0.006/-0.000 0.320 0.415
BUF 7750TFE 7.750 +0.000/-0.004 3/16 8.366 +0.005/-0.000 0.247 0.308
BUF 7750TFE1 7.750 +0.000/-0.005 1/4 8.580 +0.006/-0.000 0.320 0.415
BUF 8000TFE1 8.000 +0.000/-0.004 3/16 8.616 +0.005/-0.000 0.247 0.308
BUF 8000TFE 8.000 +0.000/-0.005 1/4 8.830 +0.006/-0.000 0.320 0.415
BUF 8500TFE 8.500 +0.000/-0.005 1/4 9.330 +0.006/-0.000 0.320 0.415
BUF 9000TFE 9.000 +0.000/-0.005 1/4 9.830 +0.006/-0.000 0.320 0.415
BUF 9500TFE 9.500 +0.000/-0.005 1/4 10.330 +0.006/-0.000 0.320 0.415
BUF 10000TFE 10.000 +0.000/-0.005 1/4 10.830 +0.006/-0.000 0.320 0.415
BUF 10500TFE 10.500 +0.000/-0.005 1/4 11.330 +0.006/-0.000 0.320 0.415
BUF 11000TFE 11.000 +0.000/-0.005 1/4 11.830 +0.006/-0.000 0.320 0.415
BUF 11500TFE 11.500 +0.000/-0.005 1/4 12.330 +0.006/-0.000 0.320 0.415
BUF 12000TFE 12.000 +0.000/-0.005 1/4 12.830 +0.006/-0.000 0.320 0.415
HITECHSEALS.COM 89
RM-Style
1/8 0.022 0.018 0.012 Consult HTS
Buffer Seals
3/16 0.030 0.022 0.018 Consult HTS
A B C D
BUF 1000RM 1.000 +0.000/-0.003 1/8 1.424 +0.004/-0.000 0.166 0.212
BUF 1250RM 1.250 +0.000/-0.003 1/8 1.674 +0.004/-0.000 0.166 0.212
BUF 1500RM 1.500 +0.000/-0.003 1/8 1.924 +0.004/-0.000 0.166 0.212
BUF 1500RM1 1.500 +0.000/-0.004 3/16 2.116 +0.005/-0.000 0.247 0.308
BUF 1750RM 1.750 +0.000/-0.003 1/8 2.174 +0.004/-0.000 0.166 0.212
BUF 1750RM1 1.750 +0.000/-0.004 3/16 2.366 +0.005/-0.000 0.247 0.308
BUF 2000RM 2.000 +0.000/-0.003 1/8 2.424 +0.004/-0.000 0.166 0.212
BUF 2000RM1 2.000 +0.000/-0.004 3/16 2.616 +0.005/-0.000 0.247 0.308
BUF 2250RM 2.250 +0.000/-0.003 1/8 2.674 +0.004/-0.000 0.166 0.212
BUF 2250RM1 2.250 +0.000/-0.004 3/16 2.866 +0.005/-0.000 0.247 0.308
BUF 2500RM 2.500 +0.000/-0.003 1/8 2.924 +0.004/-0.000 0.166 0.212
BUF 2500RM1 2.500 +0.000/-0.004 3/16 3.116 +0.005/-0.000 0.247 0.308
BUF 2750RM 2.750 +0.000/-0.003 1/8 3.174 +0.004/-0.000 0.166 0.212
BUF 2750RM1 2.750 +0.000/-0.004 3/16 3.366 +0.005/-0.000 0.247 0.308
BUF 3000RM 3.000 +0.000/-0.003 1/8 3.424 +0.004/-0.000 0.166 0.212
BUF 3000RM1 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
90 HITECHSEALS.COM
RB-Style
3/16 0.030 0.022 0.018 Consult HTS
Buffer Seals
A B C D
BUF 1750RB 1.750 +0.000/-0.004 3/16 2.366 +0.005/-0.000 0.247 0.308
BUF 2250RB 2.250 +0.000/-0.004 3/16 2.866 +0.005/-0.000 0.247 0.308
BUF 2500RB 2.500 +0.000/-0.004 3/16 3.116 +0.005/-0.000 0.247 0.308
BUF 2750RB 2.750 +0.000/-0.004 3/16 3.366 +0.005/-0.000 0.247 0.308
BUF 3000RB 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
BUF 3500RB 3.500 +0.000/-0.004 3/16 4.116 +0.005/-0.000 0.247 0.308
BUF 4000RB 4.000 +0.000/-0.004 3/16 4.616 +0.005/-0.000 0.247 0.308
BUF 4250RB 4.250 +0.000/-0.004 3/16 4.866 +0.005/-0.000 0.247 0.308
BUF 4500RB 4.500 +0.000/-0.004 3/16 5.116 +0.005/-0.000 0.247 0.308
BUF 4750RB 4.750 +0.000/-0.004 3/16 5.366 +0.005/-0.000 0.247 0.308
BUF 5000RB 5.000 +0.000/-0.004 3/16 5.616 +0.005/-0.000 0.247 0.308
BUF 5250RB 5.250 +0.000/-0.004 3/16 5.866 +0.005/-0.000 0.247 0.308
BUF 5500RB 5.500 +0.000/-0.004 3/16 6.116 +0.005/-0.000 0.247 0.308
BUF 5750RB 5.750 +0.000/-0.004 3/16 6.366 +0.005/-0.000 0.247 0.308
BUF 6000RB 6.000 +0.000/-0.004 3/16 6.616 +0.005/-0.000 0.247 0.308
BUF 6250RB 6.250 +0.000/-0.004 3/16 6.866 +0.005/-0.000 0.247 0.308
BUF 6500RB 6.500 +0.000/-0.004 3/16 7.116 +0.005/-0.000 0.247 0.308
BUF 6750RB 6.750 +0.000/-0.004 3/16 7.366 +0.005/-0.000 0.247 0.308
BUF 7000RB 7.000 +0.000/-0.004 3/16 7.616 +0.005/-0.000 0.247 0.308
BUF 7250RB 7.250 +0.000/-0.004 3/16 7.866 +0.005/-0.000 0.247 0.308
BUF 7500RB 7.500 +0.000/-0.004 3/16 8.116 +0.005/-0.000 0.247 0.308
BUF 7750RB 7.750 +0.000/-0.004 3/16 8.366 +0.005/-0.000 0.247 0.308
BUF 8000RB 8.000 +0.000/-0.004 3/16 8.616 +0.005/-0.000 0.247 0.308
HITECHSEALS.COM 91
RS-Style
3/16 0.040 0.030 0.024 Consult HTS
Buffer Seals
1/4 0.046 0.036 0.030 Consult HTS
A B C D
BUF 3000RS 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
BUF 3250RS 3.250 +0.000/-0.004 3/16 3.866 +0.005/-0.000 0.247 0.308
BUF 3500RS 3.500 +0.000/-0.004 3/16 4.116 +0.005/-0.000 0.247 0.308
BUF 3750RS 3.750 +0.000/-0.004 3/16 4.366 +0.005/-0.000 0.247 0.308
BUF 4000RS 4.000 +0.000/-0.004 3/16 4.616 +0.005/-0.000 0.247 0.308
BUF 4000RS1 4.000 +0.000/-0.005 1/4 4.830 +0.006/-0.000 0.320 0.415
BUF 4250RS 4.250 +0.000/-0.004 3/16 4.866 +0.005/-0.000 0.247 0.308
BUF 4250RS1 4.250 +0.000/-0.005 1/4 5.080 +0.006/-0.000 0.320 0.415
BUF 4500RS 4.500 +0.000/-0.004 3/16 5.116 +0.005/-0.000 0.247 0.308
BUF 4500RS1 4.500 +0.000/-0.005 1/4 5.330 +0.006/-0.000 0.320 0.415
BUF 4750RS 4.750 +0.000/-0.004 3/16 5.366 +0.005/-0.000 0.247 0.308
BUF 4750RS1 4.750 +0.000/-0.005 1/4 5.580 +0.006/-0.000 0.320 0.415
BUF 5000RS 5.000 +0.000/-0.004 3/16 5.616 +0.005/-0.000 0.247 0.308
BUF 5000RS1 5.000 +0.000/-0.005 1/4 5.830 +0.006/-0.000 0.320 0.415
BUF 5250RS 5.250 +0.000/-0.004 3/16 5.866 +0.005/-0.000 0.247 0.308
BUF 5250RS1 5.250 +0.000/-0.005 1/4 6.080 +0.006/-0.000 0.320 0.415
BUF 5500RS 5.500 +0.000/-0.004 3/16 6.116 +0.005/-0.000 0.247 0.308
BUF 5500RS1 5.500 +0.000/-0.005 1/4 6.330 +0.006/-0.000 0.320 0.415
BUF 5750RS 5.750 +0.000/-0.004 3/16 6.366 +0.005/-0.000 0.247 0.308
BUF 5750RS1 5.750 +0.000/-0.005 1/4 6.580 +0.006/-0.000 0.320 0.415
BUF 6000RS 6.000 +0.000/-0.004 3/16 6.616 +0.005/-0.000 0.247 0.308
92 HITECHSEALS.COM
RS-Style
A B C D
BUF 6000RS1 6.000 +0.000/-0.005 1/4 6.830 +0.006/-0.000 0.320 0.415
Buffer Seals
BUF 6250RS 6.250 +0.000/-0.004 3/16 6.866 +0.005/-0.000 0.247 0.308
BUF 6250RS1 6.250 +0.000/-0.005 1/4 7.080 +0.006/-0.000 0.320 0.415
BUF 6500RS 6.500 +0.000/-0.004 3/16 7.116 +0.005/-0.000 0.247 0.308
BUF 6500RS1 6.500 +0.000/-0.005 1/4 7.330 +0.006/-0.000 0.320 0.415
BUF 6750RS 6.750 +0.000/-0.004 3/16 7.366 +0.005/-0.000 0.247 0.308
BUF 6750RS1 6.750 +0.000/-0.005 1/4 7.580 +0.006/-0.000 0.320 0.415
BUF 7000RS 7.000 +0.000/-0.004 3/16 7.616 +0.005/-0.000 0.247 0.308
BUF 7000RS1 7.000 +0.000/-0.005 1/4 7.830 +0.006/-0.000 0.320 0.415
BUF 7250RS 7.250 +0.000/-0.004 3/16 7.866 +0.005/-0.000 0.247 0.308
BUF 7250RS1 7.250 +0.000/-0.005 1/4 8.080 +0.006/-0.000 0.320 0.415
BUF 7500RS 7.500 +0.000/-0.004 3/16 8.116 +0.005/-0.000 0.247 0.308
BUF 7500RS1 7.500 +0.000/-0.005 1/4 8.330 +0.006/-0.000 0.320 0.415
BUF 7750RS 7.750 +0.000/-0.004 3/16 8.366 +0.005/-0.000 0.247 0.308
BUF 7750RS1 7.750 +0.000/-0.005 1/4 8.580 +0.006/-0.000 0.320 0.415
BUF 8000RS 8.000 +0.000/-0.004 3/16 8.616 +0.005/-0.000 0.247 0.308
BUF 8000RS1 8.000 +0.000/-0.005 1/4 8.830 +0.006/-0.000 0.320 0.415
BUF 8500RS 8.500 +0.000/-0.005 1/4 9.330 +0.006/-0.000 0.320 0.415
BUF 9000RS 9.000 +0.000/-0.005 1/4 9.830 +0.006/-0.000 0.320 0.415
BUF 9500RS 9.500 +0.000/-0.005 1/4 10.330 +0.006/-0.000 0.320 0.415
BUF 10000RS 10.000 +0.000/-0.005 1/4 10.830 +0.006/-0.000 0.320 0.415
BUF 10500RS 10.500 +0.000/-0.005 1/4 11.330 +0.006/-0.000 0.320 0.415
BUF 11000RS 11.000 +0.000/-0.005 1/4 11.830 +0.006/-0.000 0.320 0.415
BUF 11500RS 11.500 +0.000/-0.005 1/4 12.330 +0.006/-0.000 0.320 0.415
BUF 12000RS 12.000 +0.000/-0.005 1/4 12.830 +0.006/-0.000 0.320 0.415
BUF 12500RS 12.500 +0.000/-0.005 1/4 13.330 +0.006/-0.000 0.320 0.415
BUF 13000RS 13.000 +0.000/-0.005 1/4 13.830 +0.006/-0.000 0.320 0.415
BUF 13500RS 13.500 +0.000/-0.005 1/4 14.330 +0.006/-0.000 0.320 0.415
BUF 14000RS 14.000 +0.000/-0.005 1/4 14.830 +0.006/-0.000 0.320 0.415
BUF 14500RS 14.500 +0.000/-0.005 1/4 15.330 +0.006/-0.000 0.320 0.415
BUF 15000RS 15.000 +0.000/-0.005 1/4 15.830 +0.006/-0.000 0.320 0.415
BUF 15500RS 15.500 +0.000/-0.005 1/4 16.330 +0.006/-0.000 0.320 0.415
BUF 16000RS 16.000 +0.000/-0.005 1/4 16.830 +0.006/-0.000 0.320 0.415
HITECHSEALS.COM 93
Caterpillar* One Piece Style

Buffer Seals
Part Number Shaft Diameter CAT Part Number Part Number Shaft Diameter CAT Part Number
BUF 0875 0.875 5P4673 BUF 3500 3.500 6J6736
BUF 1250 1.250 9J3497 BUF 3750 3.750 8J6070
BUF 1500 1.500 6J9733 BUF 4000 4.000 8J4627
BUF 1750 1.750 6J9178 BUF 4250 4.250 7J8943
BUF 2000 2.000 6J6917 BUF 4375 4.375 3G5055
BUF 2250 2.250 5J3616 BUF 4750 4.750 7J9257
BUF 2375 2.375 6J6916 BUF 5000 5.000 8J4509
BUF 2500 2.500 5J3620 BUF 5500 5.500 8J9449
BUF 2750 2.750 6J6553 BUF 5750 5.750 9J5468
BUF 3000 3.000 6J6915 BUF 6500 6.500 6J8631
BUF 3250 3.250 6J7167 BUF 7000 7.000 9J2495
Caterpillar* Two Piece Style
Part Number Shaft Diameter CAT Part Number

BUF 15001 1.500 8C9122
BUF 17501 1.750 8C9123
BUF 20001 2.000 8C9124
BUF 22501 2.250 8C9125
BUF 23751 2.375 8C9138
BUF 25001 2.500 8C3839
BUF 27501 2.750 8C3841
BUF 30001 3.000 8C9126
BUF 32501 3.250 8C9121
BUF 35001 3.500 8C9127
BUF 37501 3.750 8C9128
BUF 40001 4.000 8C9129
* Our Caterpillar parts are not original equipment parts. Caterpillar part numbers are only provided as a reference.
94 HITECHSEALS.COM
Imperial Seals Modular Bearings

Modular Bearings
Product Description
Modular bearings are used in both rod and piston applications. They act as a wear and load bearing surface to help extend the
life of a loaded or unloaded U-cup. The standard material of modular bearings is nylon.
Part Numbers:
MB - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
C/S I.D. Height* Material - if other than Nylon

* Height is only listed if the axial height is greater than the cross-section.
Example: MB - 25001750 H - Modular Bearing, Hytrel®, 1 - 3/4” Nom. I.D., 2 -1/4” Nom. O.D., 1/4” Nom. C/S, 1/4” Nom. Height
HITECHSEALS.COM 95
Modular Bearings Imperial Seals
Modular Bearings
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
MB 12500125 1/8 3/8 1/8 MB 25001750 1 - 3/4 2 - 1/4 1/4
MB 12500250 1/4 1/2 1/8 MB 25001875 1 - 7/8 2 - 3/8 1/4
MB 12500312 5/16 9/16 1/8 MB 25002000 2 2 - 1/2 1/4
MB 12500375 3/8 5/8 1/8 MB 25002250 2 - 1/4 2 - 3/4 1/4
MB 12500500 1/2 3/4 1/8 MB 25002500 2 - 1/2 3 1/4
MB 12500625 5/8 7/8 1/8 MB 25002625 2 - 5/8 3 - 1/8 1/4
MB 12500687 11/16 15/16 1/8 MB 25002750 2 - 3/4 3 - 1/4 1/4
MB 12500812 13/16 1 - 1/16 1/8 MB 25002875 2 - 7/8 3 - 3/8 1/4
MB 12500937 15/16 1 - 3/16 1/8 MB 25003000 3 3 - 1/2 1/4
MB 12501000 1 1 - 1/4 1/8 MB 25003250 3 - 1/4 3 - 3/4 1/4
MB 12501062 1 - 1/16 1 - 5/16 1/8 MB 25003375 3 - 3/8 3 - 7/8 1/4
MB 12501250 1 - 1/4 1 - 1/2 1/8 MB 25003500 3 - 1/2 4 1/4
MB 12501375 1 - 3/8 1 - 5/8 1/8 MB 25003750 3 - 3/4 4 - 1/4 1/4
MB 12501500 1 - 1/2 1 - 3/4 1/8 MB 25004000 4 4 - 1/2 1/4
MB 18700500 1/2 7/8 3/16 MB 25004125 4 - 1/8 4 - 5/8 1/4
MB 18700625 5/8 1 3/16 MB 25004250 4 - 1/4 4 - 3/4 1/4
MB 18701000 1 1 - 3/8 3/16 MB 25004500 4 - 1/2 5 1/4
MB 18701250 1 - 1/4 1 - 5/8 3/16 MB 25005000 5 5 - 1/2 1/4
MB 18701312 1 - 5/16 1 -11/16 3/16 MB 25005250 5 - 1/4 5 - 3/4 1/4
MB 18701500 1 - 1/2 1 - 7/8 3/16 MB 25005500 5 - 1/2 6 1/4
MB 18701625 1 - 5/8 2 3/16 MB 25006000 6 6 - 1/2 1/4
MB 18701875 1 - 7/8 2 - 1/4 3/16 MB 25006250 6 - 1/4 6 - 3/4 1/4
MB 18701937 1 -15/16 2 - 5/16 3/16 MB 25007250 7 - 1/4 7 - 3/4 1/4
MB 18702000 2 2 - 3/8 3/16 MB 25007500 7 - 1/2 8 1/4
MB 18702125 2 - 1/8 2 - 1/2 3/16 MB 25007750 7 - 3/4 8 - 1/4 1/4
MB 18702500 2 - 1/2 2 - 7/8 3/16 MB 250010000 10 10 - 1/2 1/4
MB 18702625 2 - 5/8 3 3/16 MB 250010750 10 - 3/4 11 - 1/4 1/4
MB 18702750 2 - 3/4 3 - 1/8 3/16 MB 250013000 13 13 - 1/2 1/4
MB 18703000 3 3 - 3/8 3/16 MB 28102250 2 - 1/4 2 -13/16 9/32
MB 18703125 3 - 1/8 3 - 1/2 3/16 MB 28108000 8 8 - 9/16 9/32
MB 18703250 3 - 1/4 3 - 5/8 3/16 MB 31201250 1 - 1/4 1 - 7/8 5/16
MB 18703500 3 - 1/2 3 - 7/8 3/16 MB 31201375 1 - 3/8 2 5/16
MB 18703625 3 - 5/8 4 3/16 MB 31201500 1 - 1/2 2 - 1/8 5/16
MB 18703875 3 - 7/8 4 - 1/4 3/16 MB 31201625 1 - 5/8 2 - 1/4 5/16
MB 25000500 1/2 1 1/4 MB 31201750 1 - 3/4 2 - 3/8 5/16
MB 25000750 3/4 1 - 1/4 1/4 MB 31201875 1 - 7/8 2 - 1/2 5/16
MB 25000875 7/8 1 - 3/8 1/4 MB 31202000 2 2 - 5/8 5/16
MB 25001000 1 1 - 1/2 1/4 MB 31202250 2 - 1/4 2 - 7/8 5/16
MB 25001062 1 - 1/16 1 - 9/16 1/4 MB 31202375 2 - 3/8 3 5/16
MB 25001250 1 - 1/4 1 - 3/4 1/4 MB 31202500 2 - 1/2 3 - 1/8 5/16
MB 25001312 1 - 5/16 1 -13/16 1/4 MB 31203000 3 3 - 5/8 5/16
MB 25001375 1 - 3/8 1 - 7/8 1/4 MB 31203125 3 - 1/8 3 - 3/4 5/16
MB 25001500 1 - 1/2 2 1/4 MB 31203500 3 - 1/2 4 - 1/8 5/16
96 HITECHSEALS.COM
Imperial Seals Modular Bearings
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
MB 31203750 3 - 3/4 4 - 3/8 5/16 MB 375011000 11 11 - 3/4 3/8
MB 31204125 4 - 1/8 4 - 3/4 5/16 MB 375011250 11 - 1/4 12 3/8
MB 31204250 4 - 1/4 4 - 7/8 5/16 MB 43701000 1 1 - 7/8 7/16
Modular Bearings
MB 31204375 4 - 3/8 5 5/16 MB 43702125 2 - 1/8 3 7/16
MB 31204500 4 - 1/2 5 - 1/8 5/16 MB 43705000 5 5 - 7/8 7/16
MB 31205375 5 - 3/8 6 5/16 MB 50002000 2 3 1/2
MB 31208000 8 8 - 5/8 5/16 MB 50002250 2 - 1/4 3 - 1/4 1/2
MB 37500875 7/8 1 - 5/8 3/8 MB 50002375 2 - 3/8 3 - 3/8 1/2
MB 37501000 1 1 - 3/4 3/8 MB 50002500 2 - 1/2 3 - 1/2 1/2
MB 37501250 1 - 1/4 2 3/8 MB 50002750 2 - 3/4 3 - 3/4 1/2
MB 37501375 1 - 3/8 2 - 1/8 3/8 MB 50003000 3 4 1/2
MB 37501500 1 - 1/2 2 - 1/4 3/8 MB 50003500 3 - 1/2 4 - 1/2 1/2
MB 37501625 1 - 5/8 2 - 3/8 3/8 MB 50003750 3 - 3/4 4 - 3/4 1/2
MB 37501750 1 - 3/4 2 - 1/2 3/8 MB 50004000 4 5 1/2
MB 37501875 1 - 7/8 2 - 5/8 3/8 MB 50004250 4 - 1/4 5 - 1/4 1/2
MB 37502000 2 2 - 3/4 3/8 MB 50004500 4 - 1/2 5 - 1/2 1/2
MB 37502250 2 - 1/4 3 3/8 MB 50005000 5 6 1/2
MB 37502375 2 - 3/8 3 - 1/8 3/8 MB 50005250 5 - 1/4 6 - 1/4 1/2
MB 37502500 2 - 1/2 3 - 1/4 3/8 MB 50005500 5 - 1/2 6 - 1/2 1/2
MB 37502625 2 - 5/8 3 - 3/8 3/8 MB 50006000 6 7 1/2
MB 37502750 2 - 3/4 3 - 1/2 3/8 MB 50006500 6 - 1/2 7 - 1/2 1/2
MB 37503000 3 3 - 3/4 3/8 MB 50006750 6 - 3/4 7 - 3/4 1/2
MB 37503125 3 - 1/8 3 - 7/8 3/8 MB 50007000 7 8 1/2
MB 37503250 3 - 1/4 4 3/8 MB 50008000 8 9 1/2
MB 37503375 3 - 3/8 4 - 1/8 3/8 MB 50008500 8 - 1/2 9 - 1/2 1/2
MB 37503500 3 - 1/2 4 - 1/4 3/8 MB 50009000 9 10 1/2
MB 37503750 3 - 3/4 4 - 1/2 3/8 MB 50009500 9 - 1/2 10 - 1/2 1/2
MB 37503875 3 - 7/8 4 - 5/8 3/8 MB 500010000 10 11 1/2
MB 37504000 4 4 - 3/4 3/8 MB 500010500 10 - 1/2 11 - 1/2 1/2
MB 37504125 4 - 1/8 4 - 7/8 3/8 MB 500011500 11 - 1/2 12 - 1/2 1/2
MB 37504250 4 - 1/4 5 3/8 MB 500012000 12 13 1/2
MB 37504375 4 - 3/8 5 - 1/8 3/8 MB 500013500 13 - 1/2 14 - 1/2 1/2
MB 37504500 4 - 1/2 5 - 1/4 3/8 MB 500015000 15 16 1/2
MB 37504750 4 - 3/4 5 - 1/2 3/8 MB 500017000 17 18 1/2
MB 37504875 4 - 7/8 5 - 5/8 3/8 MB 500019000 19 20 1/2
MB 37505000 5 5 - 3/4 3/8 MB 500021000 21 22 1/2
MB 37505250 5 - 1/4 6 3/8 MB 500029000 29 30 1/2
MB 37505375 5 - 3/8 6 - 1/8 3/8 MB 62502000 2 3 - 1/4 5/8
MB 37505875 5 - 7/8 6 - 5/8 3/8 MB 62502500 2 - 1/2 3 - 3/4 5/8
MB 37506000 6 6 - 3/4 3/8 MB 62502750 2 - 3/4 4 5/8
MB 37506250 6 - 1/4 7 3/8 MB 62503000 3 4 - 1/4 5/8
MB 37506500 6 - 1/2 7 - 1/4 3/8 MB 62503250 3 - 1/4 4 - 1/2 5/8
MB 37507000 7 7 - 3/4 3/8 MB 62504625 4 - 5/8 5 - 7/8 5/8
MB 37507250 7 - 1/4 8 3/8 MB 62504750 4 - 3/4 6 5/8
MB 37507500 7 - 1/2 8 - 1/4 3/8 MB 62506750 6 - 3/4 8 5/8
MB 37507750 7 - 3/4 8 - 1/2 3/8 MB 62507000 7 8 - 1/4 5/8
MB 37509000 9 9 - 3/4 3/8 MB 625012750 12 - 3/4 14 5/8
MB 37509250 9 - 1/4 10 3/8 MB 625030000 30 31 - 1/4 5/8
MB 37509750 9 - 3/4 10 - 1/2 3/8 MB 75006500 6 - 1/2 8 3/4
MB 375010000 10 10 - 3/4 3/8 MB 75007500 7 - 1/2 9 3/4
MB 375010500 10 - 1/2 11 - 1/4 3/8 MB 75008000 8 9 - 1/2 3/4
HITECHSEALS.COM 97
Wear Rings Imperial Seals

Carbon Graphite filled PTFE -268°C to 288°C
Glass filled Nylon -240°C to 121°C

Wear Rings
Glass filled PTFE -268°C to 288°C
Phenolic -60°C to 130°C
Product Description
The function of a wear ring is to help keep the piston centred, which allows for even wear and pressure distribution on the
seals. We provide wear rings in a variety of materials, our standard material is a glass filled nylon. Wear rings are used in both
piston and rod applications. The standard tolerance for wear rings is ±0.005.
Style Advantages Installation Performance

Easiest cut style to install in most
applications.
Easy More Good Best

Butt Cut Complex
Improves bearing stress at the gap.
Easy More Good Best

Angle Cut Complex
Improves bearing stress at gap.

Better resistance to contaminants
& spike loads.
Easy More Good Best
Step Cut Complex
3/16th Cross-section is not available in Step Cut style.
Part Numbers:
WR - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
O.D. Width C/S if other *CT Material if other R-Rod

than 0.125” than Nylon:
BRZ - Bronze filled PTFE
TGF - Glass filled PTFE
*CT, close tolerance, indicates a tolerance of +0.000/-0.002 TCG - Carbon Graphite filled PTFE
PH - Phenolic
PEEK - PEEK
98 HITECHSEALS.COM
Imperial Seals Wear Rings
Listed parts have a 0.125” actual target cross-section. Wear rings can be manufactured with custom cross-sections upon request.
Part Bore Seal Part Bore Seal Part Bore Seal

Number Dia. Height Number Dia. Height Number Dia. Height
Wear Rings
WR 1000187 1.000 0.187 WR 1250125 1.250 1.250 WR 2000750 2.000 0.750
WR 1000250 1.000 0.250 WR 1250150 1.250 1.500 WR 2000875 2.000 0.875
WR 1000312 1.000 0.312 WR 1250175 1.250 1.750 WR 2000100 2.000 1.000
WR 1000375 1.000 0.375 WR 1250200 1.250 2.000 WR 2000125 2.000 1.250
WR 1000500 1.000 0.500 WR 1500187 1.500 0.187 WR 2000150 2.000 1.500
WR 1000625 1.000 0.625 WR 1500250 1.500 0.250 WR 2000175 2.000 1.750
WR 1000750 1.000 0.750 WR 1500312 1.500 0.312 WR 2000200 2.000 2.000
WR 1000875 1.000 0.875 WR 1500375 1.500 0.375 WR 2500187 2.500 0.187
WR 1000100 1.000 1.000 WR 1500500 1.500 0.500 WR 2500250 2.500 0.250
WR 1000125 1.000 1.250 WR 1500625 1.500 0.625 WR 2500312 2.500 0.312
WR 1000150 1.000 1.500 WR 1500750 1.500 0.750 WR 2500375 2.500 0.375
WR 1000175 1.000 1.750 WR 1500875 1.500 0.875 WR 2500500 2.500 0.500
WR 1000200 1.000 2.000 WR 1500100 1.500 1.000 WR 2500625 2.500 0.625
WR 1125187 1.125 0.187 WR 1500125 1.500 1.250 WR 2500750 2.500 0.750
WR 1125250 1.125 0.250 WR 1500150 1.500 1.500 WR 2500875 2.500 0.875
WR 1125312 1.125 0.312 WR 1500175 1.500 1.750 WR 2500100 2.500 1.000
WR 1125375 1.125 0.375 WR 1500200 1.500 2.000 WR 2500125 2.500 1.250
WR 1125500 1.125 0.500 WR 1750187 1.750 0.187 WR 2500150 2.500 1.500
WR 1125625 1.125 0.625 WR 1750250 1.750 0.250 WR 2500175 2.500 1.750
WR 1125750 1.125 0.750 WR 1750312 1.750 0.312 WR 2500200 2.500 2.000
WR 1125875 1.125 0.875 WR 1750375 1.750 0.375 WR 2625187 2.625 0.187
WR 1125100 1.125 1.000 WR 1750500 1.750 0.500 WR 2625250 2.625 0.250
WR 1125125 1.125 1.250 WR 1750625 1.750 0.625 WR 2625312 2.625 0.312
WR 1125150 1.125 1.500 WR 1750750 1.750 0.750 WR 2625375 2.625 0.375
WR 1125175 1.125 1.750 WR 1750875 1.750 0.875 WR 2625500 2.625 0.500
WR 1125200 1.125 2.000 WR 1750100 1.750 1.000 WR 2625625 2.625 0.625
WR 1250187 1.250 0.187 WR 1750125 1.750 1.250 WR 2625750 2.625 0.750
WR 1250250 1.250 0.250 WR 1750150 1.750 1.500 WR 2625875 2.625 0.875
WR 1250312 1.250 0.312 WR 1750175 1.750 1.750 WR 2625100 2.625 1.000
WR 1250375 1.250 0.375 WR 1750200 1.750 2.000 WR 2625125 2.625 1.250
WR 1250500 1.250 0.500 WR 2000250 2.000 0.250 WR 2625150 2.625 1.500
WR 1250625 1.250 0.625 WR 2000312 2.000 0.312 WR 2625175 2.625 1.750
WR 1250750 1.250 0.750 WR 2000375 2.000 0.375 WR 2625200 2.625 2.000
WR 1250875 1.250 0.875 WR 2000500 2.000 0.500 WR 2750187 2.750 0.187
WR 1250100 1.250 1.000 WR 2000625 2.000 0.625 WR 2750250 2.750 0.250
HITECHSEALS.COM 99

WR 2750312 2.750 0.312 WR 3250175 3.250 1.750 WR 3875875 3.875 0.875
WR 2750375 2.750 0.375 WR 3250200 3.250 2.000 WR 3875100 3.875 1.000
WR 2750500 2.750 0.500 WR 3500187 3.500 0.187 WR 3875125 3.875 1.250
Wear Rings
WR 2750625 2.750 0.625 WR 3500250 3.500 0.250 WR 3875150 3.875 1.500

WR 2750750 2.750 0.750 WR 3500312 3.500 0.312 WR 3875175 3.875 1.750
WR 2750875 2.750 0.875 WR 3500375 3.500 0.375 WR 3875200 3.875 2.000
WR 2750100 2.750 1.000 WR 3500500 3.500 0.500 WR 4000187 4.000 0.187
WR 2750125 2.750 1.250 WR 3500625 3.500 0.625 WR 4000250 4.000 0.250
WR 2750150 2.750 1.500 WR 3500750 3.500 0.750 WR 4000312 4.000 0.312
WR 2750175 2.750 1.750 WR 3500875 3.500 0.875 WR 4000375 4.000 0.375
WR 2750200 2.750 2.000 WR 3500100 3.500 1.000 WR 4000500 4.000 0.500
WR 3000187 3.000 0.187 WR 3500125 3.500 1.250 WR 4000625 4.000 0.625
WR 3000250 3.000 0.250 WR 3500150 3.500 1.500 WR 4000750 4.000 0.750
WR 3000312 3.000 0.312 WR 3500175 3.500 1.750 WR 4000875 4.000 0.875
WR 3000375 3.000 0.375 WR 3500200 3.500 2.000 WR 4000100 4.000 1.000
WR 3000500 3.000 0.500 WR 3750187 3.750 0.187 WR 4000125 4.000 1.250
WR 3000625 3.000 0.625 WR 3750250 3.750 0.250 WR 4000150 4.000 1.500
WR 3000750 3.000 0.750 WR 3750312 3.750 0.312 WR 4000175 4.000 1.750
WR 3000875 3.000 0.875 WR 3750375 3.750 0.375 WR 4000200 4.000 2.000
WR 3000100 3.000 1.000 WR 3750500 3.750 0.500 WR 4250187 4.250 0.187
WR 3000125 3.000 1.250 WR 3750625 3.750 0.625 WR 4250250 4.250 0.250
WR 3000150 3.000 1.500 WR 3750750 3.750 0.750 WR 4250312 4.250 0.312
WR 3000175 3.000 1.750 WR 3750875 3.750 0.875 WR 4250375 4.250 0.375
WR 3000200 3.000 2.000 WR 3750100 3.750 1.000 WR 4250500 4.250 0.500
WR 3250187 3.250 0.187 WR 3750125 3.750 1.250 WR 4250625 4.250 0.625
WR 3250250 3.250 0.250 WR 3750150 3.750 1.500 WR 4250750 4.250 0.750
WR 3250312 3.250 0.312 WR 3750175 3.750 1.750 WR 4250875 4.250 0.875
WR 3250375 3.250 0.375 WR 3750200 3.750 2.000 WR 4250100 4.250 1.000
WR 3250500 3.250 0.500 WR 3875187 3.875 0.187 WR 4250125 4.250 1.250
WR 3250625 3.250 0.625 WR 3875250 3.875 0.250 WR 4250150 4.250 1.500
WR 3250750 3.250 0.750 WR 3875312 3.875 0.312 WR 4250175 4.250 1.750
WR 3250875 3.250 0.875 WR 3875375 3.875 0.375 WR 4250200 4.250 2.000
WR 3250100 3.250 1.000 WR 3875500 3.875 0.500 WR 4500187 4.500 0.187
WR 3250125 3.250 1.250 WR 3875625 3.875 0.625 WR 4500250 4.500 0.250
WR 3250150 3.250 1.500 WR 3875750 3.875 0.750 WR 4500312 4.500 0.312
100 HITECHSEALS.COM
WR 4500375 4.500 0.375 WR 4875200 4.875 2.000 WR 5500150 5.500 1.500
WR 4500500 4.500 0.500 WR 5000250 5.000 0.250 WR 5500175 5.500 1.750
WR 4500625 4.500 0.625 WR 5000312 5.000 0.312 WR 5500200 5.500 2.000
Wear Rings
WR 4500750 4.500 0.750 WR 5000375 5.000 0.375 WR 5625250 5.625 0.250
WR 4500875 4.500 0.875 WR 5000500 5.000 0.500 WR 5625312 5.625 0.312
WR 4500100 4.500 1.000 WR 5000625 5.000 0.625 WR 5625375 5.625 0.375
WR 4500125 4.500 1.250 WR 5000750 5.000 0.750 WR 5625500 5.625 0.500
WR 4500150 4.500 1.500 WR 5000875 5.000 0.875 WR 5625625 5.625 0.625
WR 4500175 4.500 1.750 WR 5000100 5.000 1.000 WR 5625750 5.625 0.750
WR 4500200 4.500 2.000 WR 5000125 5.000 1.250 WR 5625875 5.625 0.875
WR 4750187 4.750 0.187 WR 5000150 5.000 1.500 WR 5625100 5.625 1.000
WR 4750250 4.750 0.250 WR 5000175 5.000 1.750 WR 5625125 5.625 1.250
WR 4750312 4.750 0.312 WR 5000200 5.000 2.000 WR 5625150 5.625 1.500
WR 4750375 4.750 0.375 WR 5250250 5.250 0.250 WR 5625175 5.625 1.750
WR 4750500 4.750 0.500 WR 5250312 5.250 0.312 WR 5625200 5.625 2.000
WR 4750625 4.750 0.625 WR 5250375 5.250 0.375 WR 5750250 5.750 0.250
WR 4750750 4.750 0.750 WR 5250500 5.250 0.500 WR 5750312 5.750 0.312
WR 4750875 4.750 0.875 WR 5250625 5.250 0.625 WR 5750375 5.750 0.375
WR 4750100 4.750 1.000 WR 5250750 5.250 0.750 WR 5750500 5.750 0.500
WR 4750125 4.750 1.250 WR 5250875 5.250 0.875 WR 5750625 5.750 0.625
WR 4750150 4.750 1.500 WR 5250100 5.250 1.000 WR 5750750 5.750 0.750
WR 4750175 4.750 1.750 WR 5250125 5.250 1.250 WR 5750875 5.750 0.875
WR 4750200 4.750 2.000 WR 5250150 5.250 1.500 WR 5750100 5.750 1.000
WR 4875187 4.875 0.187 WR 5250175 5.250 1.750 WR 5750125 5.750 1.250
WR 4875250 4.875 0.250 WR 5250200 5.250 2.000 WR 5750150 5.750 1.500
WR 4875312 4.875 0.312 WR 5250225 5.250 2.250 WR 5750175 5.750 1.750
WR 4875375 4.875 0.375 WR 5500250 5.500 0.250 WR 5750200 5.750 2.000
WR 4875500 4.875 0.500 WR 5500312 5.500 0.312 WR 6000250 6.000 0.250
WR 4875625 4.875 0.625 WR 5500375 5.500 0.375 WR 6000312 6.000 0.312
WR 4875750 4.875 0.750 WR 5500500 5.500 0.500 WR 6000375 6.000 0.375
WR 4875875 4.875 0.875 WR 5500625 5.500 0.625 WR 6000500 6.000 0.500
WR 4875100 4.875 1.000 WR 5500750 5.500 0.750 WR 6000625 6.000 0.625
WR 4875125 4.875 1.250 WR 5500875 5.500 0.875 WR 6000750 6.000 0.750
WR 4875150 4.875 1.500 WR 5500100 5.500 1.000 WR 6000875 6.000 0.875
WR 4875175 4.875 1.750 WR 5500125 5.500 1.250 WR 6000100 6.000 1.000
HITECHSEALS.COM 101

WR 6000125 6.000 1.250 WR 6750100 6.750 1.000 WR 7500875 7.500 0.875
WR 6000150 6.000 1.500 WR 6750125 6.750 1.250 WR 7500100 7.500 1.000
WR 6000175 6.000 1.750 WR 6750150 6.750 1.500 WR 7500125 7.500 1.250
Wear Rings
WR 6000200 6.000 2.000 WR 6750175 6.750 1.750 WR 7500150 7.500 1.500

WR 6250250 6.250 0.250 WR 6750200 6.750 2.000 WR 7500175 7.500 1.750
WR 6250312 6.250 0.312 WR 7000250 7.000 0.250 WR 7500200 7.500 2.000
WR 6250375 6.250 0.375 WR 7000312 7.000 0.312 WR 7750250 7.750 0.250
WR 6250500 6.250 0.500 WR 7000375 7.000 0.375 WR 7750312 7.750 0.312
WR 6250625 6.250 0.625 WR 7000500 7.000 0.500 WR 7750375 7.750 0.375
WR 6250750 6.250 0.750 WR 7000625 7.000 0.625 WR 7750500 7.750 0.500
WR 6250875 6.250 0.875 WR 7000750 7.000 0.750 WR 7750625 7.750 0.625
WR 6250100 6.250 1.000 WR 7000875 7.000 0.875 WR 7750750 7.750 0.750
WR 6250125 6.250 1.250 WR 7000100 7.000 1.000 WR 7750875 7.750 0.875
WR 6250150 6.250 1.500 WR 7000125 7.000 1.250 WR 7750100 7.750 1.000
WR 6250175 6.250 1.750 WR 7000150 7.000 1.500 WR 7750125 7.750 1.250
WR 6250200 6.250 2.000 WR 7000175 7.000 1.750 WR 7750150 7.750 1.500
WR 6500250 6.500 0.250 WR 7000200 7.000 2.000 WR 7750175 7.750 1.750
WR 6500312 6.500 0.312 WR 7250250 7.250 0.250 WR 7750200 7.750 2.000
WR 6500375 6.500 0.375 WR 7250312 7.250 0.312 WR 8000250 8.000 0.250
WR 6500500 6.500 0.500 WR 7250375 7.250 0.375 WR 8000312 8.000 0.312
WR 6500625 6.500 0.625 WR 7250500 7.250 0.500 WR 8000375 8.000 0.375
WR 6500750 6.500 0.750 WR 7250625 7.250 0.625 WR 8000500 8.000 0.500
WR 6500875 6.500 0.875 WR 7250750 7.250 0.750 WR 8000625 8.000 0.625
WR 6500100 6.500 1.000 WR 7250875 7.250 0.875 WR 8000750 8.000 0.750
WR 6500125 6.500 1.250 WR 7250100 7.250 1.000 WR 8000875 8.000 0.875
WR 6500150 6.500 1.500 WR 7250125 7.250 1.250 WR 8000100 8.000 1.000
WR 6500175 6.500 1.750 WR 7250150 7.250 1.500 WR 8000125 8.000 1.250
WR 6500200 6.500 2.000 WR 7250175 7.250 1.750 WR 8000150 8.000 1.500
WR 6750250 6.750 0.250 WR 7250200 7.250 2.000 WR 8000175 8.000 1.750
WR 6750312 6.750 0.312 WR 7500250 7.500 0.250 WR 8000200 8.000 2.000
WR 6750375 6.750 0.375 WR 7500312 7.500 0.312 WR 8250250 8.250 0.250
WR 6750500 6.750 0.500 WR 7500375 7.500 0.375 WR 8250312 8.250 0.312
WR 6750625 6.750 0.625 WR 7500500 7.500 0.500 WR 8250375 8.250 0.375
WR 6750750 6.750 0.750 WR 7500625 7.500 0.625 WR 8250500 8.250 0.500
WR 6750875 6.750 0.875 WR 7500750 7.500 0.750 WR 8250625 8.250 0.625
102 HITECHSEALS.COM
WR 8250750 8.250 0.750 WR 9000625 9.000 0.625 WR 9750500 9.750 0.500
WR 8250875 8.250 0.875 WR 9000750 9.000 0.750 WR 9750625 9.750 0.625
WR 8250100 8.250 1.000 WR 9000875 9.000 0.875 WR 9750750 9.750 0.750
Wear Rings
WR 8250125 8.250 1.250 WR 9000100 9.000 1.000 WR 9750875 9.750 0.875
WR 8250150 8.250 1.500 WR 9000125 9.000 1.250 WR 9750100 9.750 1.000
WR 8250175 8.250 1.750 WR 9000150 9.000 1.500 WR 9750125 9.750 1.250
WR 8250200 8.250 2.000 WR 9000175 9.000 1.750 WR 9750150 9.750 1.500
WR 8500250 8.500 0.250 WR 9000200 9.000 2.000 WR 9750175 9.750 1.750
WR 8500312 8.500 0.312 WR 9250250 9.250 0.250 WR 9750200 9.750 2.000
WR 8500375 8.500 0.375 WR 9250312 9.250 0.312 WR 10000500 10.000 0.500
WR 8500500 8.500 0.500 WR 9250375 9.250 0.375 WR 10000625 10.000 0.625
WR 8500625 8.500 0.625 WR 9250500 9.250 0.500 WR 10000750 10.000 0.750
WR 8500750 8.500 0.750 WR 9250625 9.250 0.625 WR 10000875 10.000 0.875
WR 8500875 8.500 0.875 WR 9250750 9.250 0.750 WR 10000100 10.000 1.000
WR 8500100 8.500 1.000 WR 9250875 9.250 0.875 WR 10000125 10.000 1.250
WR 8500125 8.500 1.250 WR 9250100 9.250 1.000 WR 10000150 10.000 1.500
WR 8500150 8.500 1.500 WR 9250125 9.250 1.250 WR 10000175 10.000 1.750
WR 8500175 8.500 1.750 WR 9250150 9.250 1.500 WR 10000200 10.000 2.000
WR 8500200 8.500 2.000 WR 9250175 9.250 1.750 WR 10000225 10.000 2.250
WR 8750250 8.750 0.250 WR 9250200 9.250 2.000 WR 10500500 10.500 0.500
WR 8750312 8.750 0.312 WR 9500250 9.500 0.250 WR 10500625 10.500 0.625
WR 8750375 8.750 0.375 WR 9500312 9.500 0.312 WR 10500750 10.500 0.750
WR 8750500 8.750 0.500 WR 9500375 9.500 0.375 WR 10500875 10.500 0.875
WR 8750625 8.750 0.625 WR 9500500 9.500 0.500 WR 10500100 10.500 1.000
WR 8750750 8.750 0.750 WR 9500625 9.500 0.625 WR 10500125 10.500 1.250
WR 8750875 8.750 0.875 WR 9500750 9.500 0.750 WR 10500150 10.500 1.500
WR 8750100 8.750 1.000 WR 9500875 9.500 0.875 WR 10500175 10.500 1.750
WR 8750125 8.750 1.250 WR 9500100 9.500 1.000 WR 10500200 10.500 2.000
WR 8750150 8.750 1.500 WR 9500125 9.500 1.250
WR 8750175 8.750 1.750 WR 9500150 9.500 1.500
WR 8750200 8.750 2.000 WR 9500175 9.500 1.750
WR 9000250 9.000 0.250 WR 9500200 9.500 2.000
WR 9000312 9.000 0.312 WR 9750250 9.750 0.250
WR 9000375 9.000 0.375 WR 9750312 9.750 0.312
WR 9000500 9.000 0.500 WR 9750375 9.750 0.375
HITECHSEALS.COM 103
Dry Slide Bearings Imperial Seals
Dry Slide Bearings
Product Description
Dry sliding bearings are composed of a unique combination of materials, consisting of a carbon steel backing, an intermedi-
ate layer of sintered bronze, and self-lubricating polytetrafluoroethylene (PTFE) sliding lining. This combination offers a
resilient centralization device, preventing metal on metal contact in dynamic, high load applications. Dry sliding bearings
also have good wear resistance, excellent heat conductivity, low thermal expansion, and a low friction over a wide range of
loads, speeds, and temperatures. They are suitable for reciprocating, oscillating, rotating, and sliding movements.
Depending on your unique applications, we offer a range of dry sliding bearing materials and design options to meet the
performance requirements. The most commonly utilized designs are made from carbon steel, sintered bronze, and either a
filled or loaded PTFE. Dry Sliding bearings are used in a wide variety of industries, including:
• Oil Exploration • Automotive • Lawn & Outdoor Equipment

• Agriculture • Material Handling • Medical & Dental
• Hydraulics & Valves • All Terrain Vehicles (ATVs)
Part Numbers:
DSB - ___ ___- ___
HU ___ HT
___ ___ ______
___ ___ ______ ___
___ ___ ___ ___ ___
Nom. I.D. Height
Example: DU 56HT56, Dry Slide Bearing, 3-1/2” Nominal ID, 3-1/2” Height
104 HITECHSEALS.COM
Imperial Seals Dry Slide Bearings
D
H
C
C/S
Dry Slide Bearings

I.D O.D
.012 min
B
A
ID A B C D
1/8” - 5/16” 0.008”-0.024” 30° - 45° 0.004”- 0.012” 30° - 45°
3/8” - 11/16” 0.020”-0.040” 20° - 30° 0.005”- 0.025” 40° - 55°
3/4” - 7” 0.020" -0.040” 15° - 25° 0.005”- 0.0025” 40° - 50°
Nominal Dimensions Groove Dimensions Actual ID

Part H C/S Shaft Housing
Number ID OD ±0.010 Min. Max. Min. Max. Min. Max. Min. Max
02HT02 1/8
1/8 3/16 0.1236 0.1243 0.1873 0.1878 0.1243 0.1268
02HT03 3/16
025HT025 5/32
5/32 7/32 0.1547 0.1554 0.2186 0.2191 0.1556 0.1581
025HT04 1/4
03HT03 3/16
03HT04 3/16 1/4 1/4 0.0305 0.0315 0.1858 0.1865 0.2497 0.2503 0.1867 0.1893
03HT06 3/8
04HT04 1/4
1/4 5/16 0.2481 0.2490 0.3122 0.3128 0.2492 0.2518
04HT06 3/8
05HT06 3/8
5/16 3/8 0.3106 0.3115 0.3747 0.3753 0.3117 0.3143
05HT08 1/2
06HT06 3/8
06HT08 3/8 15/32 1/2 0.3731 0.3740 0.4684 0.4691 0.3742 0.3769
06HT12 3/4 0.0461 0.0471
07HT08 1/2
7/16 17/32 0.4355 0.4365 0.5309 0.5316 0.4367 0.4394
07HT12 3/4
08HT06 3/8
08HT08 1/2
1/2 19/32 0.4980 0.4990 0.5934 0.5941 0.4992 0.5019
08HT10 5/8
0.0461 0.0471
08HT14 7/8
09HT08 1/2
9/16 21/32 0.5605 0.5615 0.6559 0.6566 0.5617 0.5644
09HT12 3/4
10HT08 1/2
10HT10 5/8
5/8 23/32 0.0461 0.0471 0.6230 0.6240 0.7184 0.7192 0.6242 0.6270
10HT12 3/4
10HT14 7/8
HITECHSEALS.COM 105
Dry Slide Bearings Imperial Seals

Dry Slide Bearings
11HT14 11/16 25/32 7/8 0.0461 0.0471 0.6855 0.6865 0.7809 0.7817 0.6867 0.6895
12HT08 1/2
12HT12 3/4 7/8 3/4 0.7479 0.7491 0.8747 0.8755 0.7493 0.7525
12HT16 1
14HT12 3/4
14HT14 7/8 1 7/8 0.0615 0.0627 0.8729 0.8741 0.9997 1.0005 0.8743 0.8775
14HT16 1
16HT12 3/4
16HT16 1 1 - 1/8 1 0.9979 0.9991 1.1246 1.1256 0.9992 1.0026
16HT24 1 - 1/2
18HT12 3/4
1 - 1/8 19/32 1.1226 1.1238 1.2808 1.2818 1.1240 1.1278
18HT16 1
20HT12 3/4
20HT16 1
1 - 1/4 1 - 13/32 1.2472 1.2488 1.4058 1.4068 1.2490 1.2528
20HT20 1 - 1/4
20HT28 1 - 3/4
22HT16 1
22HT22 1 - 3/8 1 - 17/32 1 - 3/8 0.0770 0.0784 1.3722 1.3738 1.5308 1.5318 1.3740 1.3778
22HT28 1 - 3/4
24HT16 1
24HT20 1 - 1/4
1 - 1/2 1 - 21/32 1.4972 1.4988 1.6558 1.6568 1.4990 1.5028
24HT24 1 - 1/2
24HT32 2
26HT16 1
1 - 5/8 1 - 25/32 1.6222 1.6238 1.7808 1.7818 1.6240 1.6278
26HT24 1 - 1/2
28HT16 1
28HT24 1 - 1/2
1 - 3/4 1 - 15/16 0.0923 0.0941 1.7471 1.7487 1.9371 1.9381 1.7489 1.7535
28HT28 1 - 3/4
28HT32 2
30HT16 1
30HT30 1 - 7/8 2 - 1/16 1 - 7/8 1.8721 1.8737 2.0621 2.0633 1.8739 1.8787
30HT36 2 - 1/4
32HT16 1 0.0923 0.0941
32HT24 1 - 1/2
2 2 - 3/16 1.9969 1.9987 2.1871 2.1883 1.9989 2.0037
32HT32 2
32HT40 2 - 1/2
36HT32 2
2 - 1/4 2 - 7/16 0.0902 0.0928 2.2489 2.2507 2.4365 2.4377 2.2509 2.2573
36HT36 2 - 1/4
106 HITECHSEALS.COM
Imperial Seals Dry Slide Bearings
Dry Slide Bearings

36HT40 2 - 1/2
2 - 1/4 2 - 7/16 2.2489 2.2507 2.4365 2.4377 2.2509 2.2573
36HT48 3
40HT32 2
40HT40 2 - 1/2
2 - 1/2 2 - 11/16 2.4993 2.5011 2.6869 2.6881 2.5013 2.5077
40HT48 3
40HT56 3 - 1/2
44HT32 2
44HT40 2 - 1/2
2 - 3/4 2 - 15/16 0.0902 0.0928 2.7482 2.7500 2.9358 2.9370 2.7502 2.7566
44HT48 3
44HT56 3 - 1/2
48HT32 2 - 1/2
48HT48 3 3 - 3/16 3 2.9982 3.0000 3.1858 3.1872 3.0002 3.0068
48HT60 3 - 3/4
56HT40 2 - 1/2
56HT48 3 - 1/2 3 - 11/16 3 3.4978 3.5000 3.6858 3.6872 3.5002 3.5068
56HT60 3 - 3/4
64HT48 3
64HT60 4 4 - 3/16 3 - 3/4 3.9978 4.0000 4.1858 4.1872 4.0002 4.0068
64HT76 4 - 3/4
80HT48 3
5 5 - 3/16 0.0902 0.0928 4.9961 4.9986 5.1844 5.1860 4.9988 5.0056
80HT60 3 - 3/4
96HT48 3
6 6 - 3/16 5.9975 6.0000 6.1858 6.1874 6.0002 6.0070
96HT60 3 - 3/4
112HT60 7 7 - 3/16 3 - 3/4 6.9929 6.9954 7.1812 7.1830 6.9956 7.0026
HITECHSEALS.COM 107
Crown Seals Imperial Seals
Crown Seal Materials Temp. Range


Crown Seals
Loader Materials
Product Description
Crown seals are a double acting piston squeeze-type seal. When inserted into a piston groove, the O-ring will rest on the
static surface of the piston. Due to a crown Seals narrow single seal, the sealing point creates a positive seal for both a
vacuum and high pressure applications. The crown seal side legs act as an anti-extrusion device for the O-ring and provides
additional stability to the seal.
Our standard crown seal material is Hytrel®, however, we stock a large amount of urethane in common sizes. The crown seal
can be directly interchanged with T-seals, O-rings and quad rings. To promote the longevity of the crown seal we suggest
a wear ring be used on the piston. The wear ring helps keep the piston centred which allows for even wear and pressure
distribution on the crown seals sealing surface; a close tolerance wear ring will also help reduce bending of the rod.
Part Numbers:
CS ___ - ___ ___ ___ ___ ___ ___
WB - Wide Base
Dash Number Material - if other than Hytrel®/Nitrile
Blank - Piston CS
R - Rod CS
Contact us for rod crown seal information. The rod version of the crown seal follows the same nominal reference sizing, but contains different gland
information.
Example: CS 214 - Crown Seal, Hytrel®, Nitrile loader, 1” Nom. I.D., 1 - 1/4” Nom. O.D., 1/8” Nom. C/S
108 HITECHSEALS.COM
Imperial Seals Crown Seals
Piston Style
C
Crown Seals
B D A
15-20°
Nominal Reference Sizes A B C D

Part
Number I.D. O.D. C/S Bore Diameter Groove Diameter Groove Width Piston Diameter
CS 106 3/16 3/8 3/32 0.374 +0.002/-0.000 0.188 +0.000/-0.002 0.150 +0.005/-0.000 0.372 +0.000/-0.002
CS 108 1/4 7/16 3/32 0.436 +0.002/-0.000 0.250 +0.000/-0.002 0.150 +0.005/-0.000 0.434 +0.000/-0.002
CS 109 5/16 1/2 3/32 0.499 +0.002/-0.000 0.313 +0.000/-0.002 0.150 +0.005/-0.000 0.497 +0.000/-0.002
CS 203 5/16 9/16 1/8 0.561 +0.002/-0.000 0.315 +0.000/-0.002 0.185 +0.005/-0.000 0.559 +0.000/-0.002
CS 204 3/8 5/8 1/8 0.624 +0.002/-0.000 0.378 +0.000/-0.002 0.185 +0.005/-0.000 0.622 +0.000/-0.002
CS 205 7/16 11/16 1/8 0.686 +0.002/-0.000 0.440 +0.000/-0.002 0.185 +0.005/-0.000 0.684 +0.000/-0.002
CS 206 1/2 3/4 1/8 0.749 +0.002/-0.000 0.503 +0.000/-0.002 0.185 +0.005/-0.000 0.747 +0.000/-0.002
CS 207 9/16 13/16 1/8 0.811 +0.002/-0.000 0.565 +0.000/-0.002 0.185 +0.005/-0.000 0.809 +0.000/-0.002
CS 208 5/8 7/8 1/8 0.874 +0.002/-0.000 0.628 +0.000/-0.002 0.185 +0.005/-0.000 0.872 +0.000/-0.002
CS 209 11/16 15/16 1/8 0.936 +0.002/-0.000 0.690 +0.000/-0.002 0.185 +0.005/-0.000 0.934 +0.000/-0.002
CS 210 3/4 1 1/8 1.000 +0.002/-0.000 0.754 +0.000/-0.002 0.185 +0.005/-0.000 0.998 +0.000/-0.002
CS 211 13/16 1 - 1/16 1/8 1.062 +0.002/-0.000 0.816 +0.000/-0.002 0.185 +0.005/-0.000 1.060 +0.000/-0.002
CS 212 7/8 1 - 1/8 1/8 1.125 +0.002/-0.000 0.879 +0.000/-0.002 0.185 +0.005/-0.000 1.123 +0.000/-0.002
CS 213 15/16 1 - 3/16 1/8 1.187 +0.002/-0.000 0.941 +0.000/-0.002 0.185 +0.005/-0.000 1.185 +0.000/-0.002
CS 214 1 1 - 1/4 1/8 1.250 +0.002/-0.000 1.004 +0.000/-0.002 0.185 +0.005/-0.000 1.248 +0.000/-0.002
CS 215 1 - 1/16 1 - 5/16 1/8 1.312 +0.002/-0.000 1.066 +0.000/-0.002 0.185 +0.005/-0.000 1.310 +0.000/-0.002
CS 216 1 - 1/8 1 - 3/8 1/8 1.375 +0.002/-0.000 1.129 +0.000/-0.002 0.185 +0.005/-0.000 1.373 +0.000/-0.002
CS 217 1 - 3/16 1 - 7/16 1/8 1.437 +0.002/-0.000 1.191 +0.000/-0.002 0.185 +0.005/-0.000 1.435 +0.000/-0.002
CS 218 1 - 1/4 1 - 1/2 1/8 1.500 +0.002/-0.000 1.254 +0.000/-0.002 0.185 +0.005/-0.000 1.498 +0.000/-0.002
CS 219 1 - 5/16 1 - 9/16 1/8 1.562 +0.002/-0.000 1.316 +0.000/-0.002 0.185 +0.005/-0.000 1.560 +0.000/-0.002
CS 220 1 - 3/8 1 - 5/8 1/8 1.625 +0.002/-0.000 1.379 +0.000/-0.002 0.185 +0.005/-0.000 1.623 +0.000/-0.002
CS 222 1 - 1/2 1 - 3/4 1/8 1.750 +0.002/-0.000 1.504 +0.000/-0.002 0.185 +0.005/-0.000 1.748 +0.000/-0.002
CS 222WB 1 - 1/2 1 - 3/4 1/8 1.750 +0.002/-0.000 1.504 +0.000/-0.002 0.304 +0.005/-0.000 1.748 +0.000/-0.002
CS 325 1 - 1/2 1 - 7/8 3/16 1.875 +0.002/-0.000 1.500 +0.000/-0.002 0.280 +0.005/-0.000 1.873 +0.000/-0.002
CS 326 1 - 5/8 2 3/16 2.000 +0.002/-0.000 1.625 +0.000/-0.002 0.280 +0.005/-0.000 1.998 +0.000/-0.002
CS 326WB 1 - 5/8 2 3/16 2.000 +0.002/-0.000 1.625 +0.000/-0.002 0.424 +0.005/-0.000 1.998 +0.000/-0.002
CS 327 1 - 3/4 2 - 1/8 3/16 2.125 +0.002/-0.000 1.750 +0.000/-0.002 0.280 +0.005/-0.000 2.123 +0.000/-0.002
HITECHSEALS.COM 109
Crown Seals Imperial Seals
Piston Style
Crown Seals

Part
CS 328 1 - 7/8 2 - 1/4 3/16 2.250 +0.002/-0.000 1.875 +0.000/-0.002 0.280 +0.005/-0.000 2.248 +0.000/-0.002
CS 329 2 2 - 3/8 3/16 2.375 +0.002/-0.000 2.000 +0.000/-0.002 0.280 +0.005/-0.000 2.373 +0.000/-0.002
CS 330 2 - 1/8 2 - 1/2 3/16 2.500 +0.002/-0.000 2.125 +0.000/-0.002 0.280 +0.005/-0.000 2.498 +0.000/-0.002
CS 330WB 2 - 1/8 2 - 1/2 3/16 2.500 +0.002/-0.000 2.125 +0.000/-0.002 0.424 +0.005/-0.000 2.498 +0.000/-0.002
CS 331 2 - 1/4 2 - 5/8 3/16 2.625 +0.002/-0.000 2.250 +0.000/-0.002 0.280 +0.005/-0.000 2.622 +0.000/-0.002
CS 332 2 - 3/8 2 - 3/4 3/16 2.749 +0.004/-0.000 2.374 +0.000/-0.004 0.280 +0.005/-0.000 2.747 +0.000/-0.004
CS 333 2 - 1/2 2 - 7/8 3/16 2.874 +0.004/-0.000 2.499 +0.000/-0.004 0.280 +0.005/-0.000 2.872 +0.000/-0.004
CS 334 2 - 5/8 3 3/16 2.999 +0.004/-0.000 2.624 +0.000/-0.002 0.280 +0.005/-0.000 2.997 +0.000/-0.004
CS 335 2 - 3/4 3 - 1/8 3/16 3.124 +0.004/-0.000 2.749 +0.000/-0.004 0.280 +0.005/-0.000 3.122 +0.000/-0.004
CS 336 2 - 7/8 3 - 1/4 3/16 3.249 +0.004/-0.000 2.874 +0.000/-0.004 0.280 +0.005/-0.000 3.247 +0.000/-0.004
CS 337 3 3 - 3/8 3/16 3.375 +0.004/-0.000 3.000 +0.000/-0.004 0.280 +0.005/-0.000 3.373 +0.000/-0.004
CS 338 3 - 1/8 3 - 1/2 3/16 3.500 +0.004/-0.000 3.125 +0.000/-0.004 0.280 +0.005/-0.000 3.498 +0.000/-0.004
CS 338WB 3 - 1/8 3 - 1/2 3/16 3.500 +0.004/-0.000 3.125 +0.000/-0.004 0.424 +0.005/-0.000 3.498 +0.000/-0.004
CS 339 3 - 1/4 3 - 5/8 3/16 3.625 +0.004/-0.000 3.250 +0.000/-0.004 0.280 +0.005/-0.000 3.623 +0.000/-0.004
CS 340 3 - 3/8 3 - 3/4 3/16 3.750 +0.004/-0.000 3.375 +0.000/-0.004 0.280 +0.005/-0.000 3.748 +0.000/-0.004
CS 341 3 - 1/2 3 - 7/8 3/16 3.875 +0.004/-0.000 3.500 +0.000/-0.004 0.280 +0.005/-0.000 3.873 +0.000/-0.004
CS 341WB 3 - 1/2 3 - 7/8 3/16 3.875 +0.004/-0.000 3.500 +0.000/-0.004 0.424 +0.005/-0.000 3.873 +0.000/-0.004
CS 342 3 - 5/8 4 3/16 4.000 +0.004/-0.000 3.625 +0.000/-0.004 0.280 +0.005/-0.000 3.998 +0.000/-0.004
CS 342WB 3 - 5/8 4 3/16 4.000 +0.004/-0.000 3.625 +0.000/-0.004 0.424 +0.005/-0.000 3.998 +0.000/-0.004
CS 343 3 - 3/4 4 - 1/8 3/16 4.125 +0.004/-0.000 3.750 +0.000/-0.004 0.280 +0.005/-0.000 4.123 +0.000/-0.004
CS 344 3 - 7/8 4 - 1/4 3/16 4.250 +0.004/-0.000 3.875 +0.000/-0.004 0.280 +0.005/-0.000 4.248 +0.000/-0.004
CS 344WB 3 - 7/8 4 - 1/4 3/16 4.250 +0.004/-0.000 3.875 +0.000/-0.004 0.424 +0.005/-0.000 4.248 +0.000/-0.004
CS 345 4 4 - 3/8 3/16 4.375 +0.004/-0.000 4.000 +0.000/-0.004 0.280 +0.005/-0.000 4.373 +0.000/-0.004
CS 346 4 - 1/8 4 - 1/2 3/16 4.500 +0.004/-0.000 4.125 +0.000/-0.004 0.280 +0.005/-0.000 4.498 +0.000/-0.004
CS 346WB 4 - 1/8 4 - 1/2 3/16 4.500 +0.004/-0.000 4.125 +0.000/-0.004 0.424 +0.005/-0.000 4.498 +0.000/-0.004
CS 347 4 - 1/4 4 - 5/8 3/16 4.625 +0.004/-0.000 4.250 +0.000/-0.004 0.280 +0.005/-0.000 4.623 +0.000/-0.004
CS 348 4 - 3/8 4 - 3/4 3/16 4.750 +0.004/-0.000 4.375 +0.000/-0.004 0.280 +0.005/-0.000 4.748 +0.000/-0.004
CS 348WB 4 - 3/8 4 - 3/4 3/16 4.750 +0.004/-0.000 4.375 +0.000/-0.004 0.424 +0.005/-0.000 4.748 +0.000/-0.004
CS 349 4 - 1/2 4 - 7/8 3/16 4.875 +0.004/-0.000 4.500 +0.000/-0.004 0.280 +0.005/-0.000 4.873 +0.000/-0.004
CS 350 4 - 5/8 5 3/16 5.001 +0.004/-0.000 4.626 +0.000/-0.004 0.280 +0.005/-0.000 4.999 +0.000/-0.004
CS 350WB 4 - 5/8 5 3/16 5.001 +0.004/-0.000 4.626 +0.000/-0.004 0.424 +0.005/-0.000 4.999 +0.000/-0.004
CS 425WB 4 - 1/2 5 1/4 5.000 +0.004/-0.000 4.524 +0.000/-0.004 0.579 +0.006/-0.000 4.998 +0.000/-0.004
CS 426 4 - 5/8 5 - 1/8 1/4 5.125 +0.004/-0.000 4.646 +0.000/-0.004 0.365 +0.006/-0.000 5.124 +0.000/-0.004
CS 427 4 - 3/4 5 - 1/4 1/4 5.251 +0.004/-0.000 4.770 +0.000/-0.004 0.365 +0.006/-0.000 5.249 +0.000/-0.004
CS 428 4 - 7/8 5 - 3/8 1/4 5.376 +0.004/-0.000 4.896 +0.000/-0.004 0.365 +0.006/-0.000 5.374 +0.000/-0.004
CS 429 5 5 - 1/2 1/4 5.501 +0.004/-0.000 5.021 +0.000/-0.004 0.365 +0.006/-0.000 4.499 +0.000/-0.004
CS 430 5 - 1/8 5 - 5/8 1/4 5.626 +0.004/-0.000 5.146 +0.000/-0.004 0.365 +0.006/-0.000 5.624 +0.000/-0.004
110 HITECHSEALS.COM
Imperial Seals Crown Seals
Piston Style
Crown Seals
Part
CS 431 5 - 1/4 5 - 3/4 1/4 5.751 +0.004/-0.000 5.271 +0.000/-0.004 0.365 +0.006/-0.000 5.749 +0.000/-0.004
CS 432 5 - 3/8 5 - 7/8 1/4 5.876 +0.004/-0.000 5.396 +0.000/-0.004 0.365 +0.006/-0.000 5.874 +0.000/-0.004
CS 433 5 - 1/2 6 1/4 6.001 +0.004/-0.000 5.521 +0.000/-0.004 0.365 +0.006/-0.000 5.999 +0.000/-0.004
CS 433WB 5 - 1/2 6 1/4 6.001 +0.004/-0.000 5.521 +0.000/-0.004 0.579 +0.006/-0.000 5.999 +0.000/-0.004
CS 434 5 - 5/8 6 - 1/8 1/4 6.126 +0.004/-0.000 5.646 +0.000/-0.004 0.365 +0.006/-0.000 6.124 +0.000/-0.004
CS 435 5 - 3/4 6 - 1/4 1/4 6.251 +0.004/-0.000 5.771 +0.000/-0.004 0.365 +0.006/-0.000 6.249 +0.000/-0.004
CS 437 6 6 - 1/2 1/4 6.500 +0.006/-0.000 6.020 +0.000/-0.006 0.365 +0.006/-0.000 6.498 +0.000/-0.006
CS 438 6 - 1/4 6 - 3/4 1/4 6.750 +0.006/-0.000 6.270 +0.000/-0.006 0.365 +0.006/-0.000 6.748 +0.000/-0.006
CS 439 6 - 1/2 7 1/4 7.000 +0.006/-0.000 6.520 +0.000/-0.006 0.365 +0.006/-0.000 6.998 +0.000/-0.006
CS 440 6 - 3/4 7 - 1/4 1/4 7.250 +0.006/-0.000 6.770 +0.000/-0.006 0.365 +0.006/-0.000 7.248 +0.000/-0.006
CS 441 7 7 - 1/2 1/4 7.500 +0.006/-0.000 7.020 +0.000/-0.006 0.365 +0.006/-0.000 7.498 +0.000/-0.006
CS 442 7 - 1/4 7 - 3/4 1/4 7.750 +0.006/-0.000 7.270 +0.000/-0.006 0.365 +0.006/-0.000 7.748 +0.000/-0.006
CS 443 7 - 1/2 8 1/4 8.000 +0.006/-0.000 7.520 +0.000/-0.006 0.365 +0.006/-0.000 7.998 +0.000/-0.006
CS 443WB 7 - 1/2 8 1/4 8.000 +0.006/-0.000 7.520 +0.000/-0.006 0.579 +0.006/-0.000 7.998 +0.000/-0.006
CS 444 7 - 3/4 8 - 1/4 1/4 8.250 +0.006/-0.000 7.770 +0.000/-0.006 0.365 +0.006/-0.000 8.248 +0.000/-0.006
CS 445 8 8 - 1/2 1/4 8.500 +0.006/-0.000 8.020 +0.000/-0.006 0.365 +0.006/-0.000 8.498 +0.000/-0.006
CS 446 8 - 1/2 9 1/4 9.000 +0.006/-0.000 8.520 +0.000/-0.006 0.365 +0.006/-0.000 8.998 +0.000/-0.006
CS 447 9 9 - 1/2 1/4 9.500 +0.006/-0.000 9.020 +0.000/-0.006 0.365 +0.006/-0.000 9.498 +0.000/-0.006
CS 448 9 - 1/2 10 1/4 10.000 +0.006/-0.000 9.520 +0.000/-0.006 0.365 +0.006/-0.000 9.998 +0.000/-0.006
CS 449 10 10 - 1/2 1/4 10.500 +0.006/-0.000 10.020 +0.000/-0.006 0.365 +0.006/-0.000 10.498 +0.000/-0.006
CS 450 10 - 1/2 11 1/4 11.000 +0.006/-0.000 10.520 +0.000/-0.006 0.365 +0.006/-0.000 10.998 +0.000/-0.006
CS 451 11 11 - 1/2 1/4 11.500 +0.006/-0.000 11.020 +0.000/-0.006 0.365 +0.006/-0.000 11.498 +0.000/-0.006
CS 452 11 - 1/2 12 1/4 12.000 +0.006/-0.000 11.520 +0.000/-0.006 0.365 +0.006/-0.000 11.998 +0.000/-0.006
HITECHSEALS.COM 111
Piston Rings Imperial Seals
Ring Materials Temp. Range

15% Glass filled PTFE -268°C to 288°C
15% Graphite filled PTFE -268°C to 260°C
Piston Rings

25% Carbon Graphite filled PTFE -268°C to 288°C
40% Glass filled Nylon -240°C to 149°C
Loader Materials
Rectangular (RPS) Square (SPS) Step Cut (SCP) CAT* 2 Piece
*Caterpillar equivalent style

AQ Seal Cast Iron (CI)
Product Description
Piston rings are excellent for sealing in hydraulic and pneumatic cylinder applications. The piston ring provides excellent low
friction and a strong chemical resistance. By changing the piston seals material, the temperature range, frictional character-
istics, extrusion resistance, and wearability can be altered.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ - ___ ___ ___ ___ ___ ___ ___
O.D. Material O.D. Width

RPS - Rectangular SCP - Step Cut
SPS - Square CI - Cast Iron
AQ - AQ Seal
CAT - CAT*
Example: SPS 4000 - 4.000” O.D., Square Piston Seal, Glass Filled PTFE, 153 Nitrile O-Ring Loader
112 HITECHSEALS.COM
Imperial Seals Piston Rings
Rectangular
C
Piston Rings
A
Our standard RPS style rings are composed of a bronze filled

PTFE ring with a nitrile loader. RPS Style rings are used in me-
dium duty applications.
Groove Dimensions Ring Dimensions

A C D Loader
Part Bore Diameter Groove Groove Dash
Number +0.025/-0.000 Width Depth O.D. Width C/S No.
RPS 1000 1.000 0.125 - 0.128 0.155 - 0.157 1.030 - 1.036 0.116 - 0.121 0.067 - 0.073 -115
RPS 1250 1.250 0.125 - 0.128 0.155 - 0.157 1.280 - 1.287 0.116 - 0.121 0.067 - 0.073 -119
RPS 1500 1.500 0.125 - 0.128 0.155 - 0.157 1.530 - 1.539 0.116 - 0.121 0.067 - 0.073 -123
RPS 1750 1.750 0.125 - 0.128 0.155 - 0.157 1.780 - 1.790 0.116 - 0.121 0.067 - 0.073 -127
RPS 2000 2.000 0.125 - 0.128 0.155 - 0.157 2.030 - 2.042 0.116 - 0.121 0.067 - 0.073 -131
RPS 2250 2.250 0.125 - 0.128 0.155 - 0.157 2.280 - 2.293 0.116 - 0.121 0.067 - 0.073 -135
RPS 2500 2.500 0.125 - 0.128 0.155 - 0.157 2.530 - 2.547 0.116 - 0.121 0.067 - 0.073 -139
RPS 2750 2.750 0.125 - 0.128 0.155 - 0.157 2.780 - 2.796 0.116 - 0.121 0.067 - 0.073 -143
RPS 3000 3.000 0.278 - 0.280 0.278 - 0.280 3.030 - 3.048 0.269 - 0.274 0.087 - 0.093 -333
RPS 3250 3.250 0.278 - 0.280 0.278 - 0.280 3.280 - 3.299 0.269 - 0.274 0.087 - 0.093 -335
RPS 3500 3.500 0.278 - 0.280 0.278 - 0.280 3.530 - 3.551 0.269 - 0.274 0.087 - 0.093 -337
RPS 3750 3.750 0.278 - 0.280 0.278 - 0.280 3.780 - 3.802 0.269 - 0.274 0.087 - 0.093 -339
RPS 4000 4.000 0.278 - 0.280 0.278 - 0.280 4.030 - 4.054 0.269 - 0.274 0.087 - 0.093 -341
RPS 4250 4.250 0.278 - 0.280 0.278 - 0.280 4.280 - 4.305 0.269 - 0.274 0.087 - 0.093 -343
RPS 4500 4.500 0.278 - 0.280 0.278 - 0.280 4.530 - 4.557 0.269 - 0.274 0.087 - 0.093 -345
RPS 4750 4.750 0.278 - 0.280 0.278 - 0.280 4.780 - 4.809 0.269 - 0.274 0.087 - 0.093 -347
RPS 5000 5.000 0.278 - 0.280 0.278 - 0.280 5.030 - 5.060 0.269 - 0.274 0.087 - 0.093 -349
RPS 5250 5.250 0.375 - 0.380 0.387 - 0.392 5.280 - 5.311 0.362 - 0.367 0.137 - 0.147 -425
RPS 5500 5.500 0.375 - 0.380 0.387 - 0.392 5.530 - 5.563 0.362 - 0.367 0.137 - 0.147 -427
RPS 5750 5.750 0.375 - 0.380 0.387 - 0.392 5.780 - 5.814 0.362 - 0.367 0.137 - 0.147 -429
RPS 6000 6.000 0.375 - 0.380 0.387 - 0.392 6.030 - 6.066 0.362 - 0.367 0.137 - 0.147 -431
RPS 6500 6.500 0.375 - 0.380 0.387 - 0.392 6.530 - 6.569 0.362 - 0.367 0.137 - 0.147 -435
RPS 7000 7.000 0.375 - 0.380 0.387 - 0.392 7.030 - 7.073 0.362 - 0.367 0.137 - 0.147 -438
RPS 7500 7.500 0.375 - 0.380 0.387 - 0.392 7.530 - 7.575 0.362 - 0.367 0.137 - 0.147 -440
RPS 8000 8.000 0.375 - 0.380 0.387 - 0.392 8.030 - 8.078 0.362 - 0.367 0.137 - 0.147 -442
RPS 8500 8.500 0.375 - 0.380 0.387 - 0.392 8.530 - 8.581 0.362 - 0.367 0.137 - 0.147 -444
RPS 9000 9.000 0.375 - 0.380 0.445 - 0.450 9.030 - 9.081 0.362 - 0.367 0.195 - 0.210 -445
RPS 9500 9.500 0.375 - 0.380 0.445 - 0.450 9.530 - 9.587 0.362 - 0.367 0.195 - 0.210 -446
RPS 10000 10.000 0.375 - 0.380 0.445 - 0.450 10.030 - 10.090 0.362 - 0.367 0.195 - 0.210 -447
RPS 11000 11.000 0.375 - 0.380 0.445 - 0.450 11.030 - 11.096 0.362 - 0.367 0.195 - 0.210 -449
RPS 12000 12.000 0.375 - 0.380 0.445 - 0.450 12.030 - 12.102 0.362 - 0.367 0.195 - 0.210 -451
Loader information is available in the O-ring section, starting on page 1.
HITECHSEALS.COM 113
Square
C
Piston Rings
A D B
Our standard SPS are composed of glass filled PTFE ring with a
nitrile loader. SPS style rings are used in light duty applications. 15-20°

A B D C
Bore Groove Piston Groove
Part Diameter Diameter Diameter Width O.D. C/S Loader
Number ± 0.001 ± 0.002 ± 0.002 ± 0.002 ± 0.5% ± 0.010 Dash No.
SPS 0500 0.500 0.241 0.497 0.083 0.511 0.070* -009
SPS 0750 0.750 0.491 0.747 0.083 0.761 0.070* -013
SPS 1000 1.000 0.741 0.997 0.083 1.011 0.070* -017
SPS 1250 1.250 0.991 1.247 0.083 1.261 0.070* -022
SPS 1500 1.500 1.241 1.497 0.083 1.511 0.070* -025
SPS 1750 1.750 1.360 1.747 0.122 1.771 0.109 -125
SPS 2000 2.000 1.606 1.996 0.130 2.024 0.115 -129
SPS 2250 2.250 1.856 2.246 0.130 2.274 0.115 -133
SPS 2500 2.500 2.106 2.496 0.130 2.524 0.115 -137
SPS 2750 2.750 2.356 2.746 0.130 2.774 0.115 -141
SPS 3000 3.000 2.606 2.996 0.130 3.026 0.115 -145
SPS 3250 3.250 2.856 3.246 0.130 3.276 0.115 -149
SPS 3500 3.500 3.106 3.496 0.130 3.526 0.115 -151
SPS 3750 3.750 3.356 3.746 0.130 3.776 0.115 -152
SPS 4000 4.000 3.606 3.996 0.130 4.026 0.115 -153
SPS 4250 4.250 3.856 4.246 0.130 4.278 0.115 -154
SPS 4500 4.500 4.106 4.496 0.130 4.528 0.115 -155
SPS 4750 4.750 4.356 4.746 0.130 4.778 0.115 -156
SPS 5000 5.000 4.606 4.996 0.130 5.028 0.115 -157
SPS 5250 5.250 4.856 5.246 0.130 5.280 0.115 -158
SPS 5500 5.500 5.106 5.496 0.130 5.530 0.115 -159
SPS 5750 5.750 5.232 5.746 0.159 5.780 0.143 -251
SPS 6000 6.000 5.482 5.996 0.159 6.030 0.143 -253
SPS 6250 6.250 5.732 6.246 0.159 6.282 0.143 -255
SPS 6500 6.500 5.982 6.496 0.159 6.532 0.143 -257
SPS 6750 6.750 6.232 6.746 0.159 6.782 0.143 -258
SPS 7000 7.000 6.482 6.996 0.159 7.037 0.143 -259
Loader information is available in the O-ring section, which starts on page 1.
114 HITECHSEALS.COM
Square
Piston Rings
A B D C
Bore Groove Piston Groove
Part Diameter Diameter Diameter Width O.D. C/S Loader
Number ± 0.001 ± 0.002 ± 0.002 ± 0.002 ± 0.5% ± 0.010 Dash No.
SPS 7500 7.500 6.982 7.496 0.159 7.537 0.143 -261
SPS 7750 7.750 7.232 7.746 0.159 7.789 0.143 -262
SPS 8000 8.000 7.482 7.996 0.159 8.040 0.143 -263
SPS 8250 8.250 7.732 8.246 0.159 8.291 0.143 -264
SPS 8500 8.500 7.982 8.496 0.159 8.543 0.143 -265
SPS 8750 8.750 8.232 8.746 0.159 8.794 0.143 -266
SPS 9000 9.000 8.482 8.996 0.159 9.045 0.143 -267
SPS 9250 9.250 8.732 9.246 0.159 9.296 0.143 -268
SPS 9500 9.500 8.982 9.496 0.159 9.546 0.143 -269
SPS 9750 9.750 9.232 9.746 0.159 9.799 0.143 -270
SPS 10000 10.000 9.482 9.996 0.159 10.050 0.143 -271
SPS 10250 10.250 9.732 10.246 0.159 10.301 0.143 -272
SPS 10500 10.500 9.982 10.496 0.159 10.550 0.143 -273
SPS 10750 10.750 10.232 10.746 0.159 10.804 0.143 -274
SPS 11000 11.000 10.482 10.996 0.159 11.055 0.143 -275
SPS 11500 11.500 10.982 11.496 0.159 11.558 0.143 -276
SPS 12000 12.000 11.482 11.996 0.159 12.060 0.143 -277
SPS 13000 13.000 12.482 12.996 0.159 13.065 0.143 -278
Loader information is available in the O-ring section, starting on page 1.
HITECHSEALS.COM 115
Step Cut
C
D
Piston Rings
A B
Our standard SCP is composed of a glass filled nylon ring and a 90 durom-
eter peroxide cured nitrile oval ring.
SCP style piston rings can withstand a higher pressure than RPS and SPS
designs. Additionally, they are easier to install due to their split profile.
A B D C A B D C
Groove Groove
Width Width
Part Bore Groove Groove +0.002 Part Bore Groove Groove +0.002
Number Dia. Dia. Depth -0.000 Number Dia. Dia. Depth -0.000
SCP 2000282 2 1.462 0.269 0.282 SCP 4500375 4 - 1/2 3.942 0.380 0.377
SCP 2250282 2 - 1/4 1.712 0.269 0.282 SCP 5000282 5 4.24 0.279 0.282
SCP 2500282 2 - 1/2 1.908 0.269 0.282 SCP 5000375 5 4.442 0.380 0.377
SCP 2500312 2 - 1/2 1.962 0.296 0.312 SCP 5250375 5 - 1/4 4.49 0.380 0.377
SCP 2750282 2 - 3/4 2.212 0.269 0.282 SCP 5500375 5 - 1/2 4.74 0.380 0.377
SCP 3000282 3 2.408 0.279 0.282 SCP 6000375 6 5.24 0.380 0.377
SCP 3000312 3 2.442 0.296 0.312 SCP 6500375 6 - 1/2 5.74 0.380 0.377
SCP 3250282 3 - 1/4 2.692 0.279 0.282 SCP 7000375 7 6.24 0.380 0.377
SCP 3500282 3 - 1/2 2.908 0.279 0.282 SCP 7500375 7 - 1/2 6.74 0.380 0.377
SCP 3500312 3 - 1/2 2.942 0.296 0.312 SCP 8000375 8 7.24 0.380 0.377
SCP 3750282 3 - 3/4 3.192 0.279 0.282 SCP 8500375 8 - 1/2 7.74 0.380 0.377
SCP 4000282 4 3.408 0.279 0.282 SCP 9000375 9 8.124 0.438 0.377
SCP 4000312 4 3.442 0.296 0.312 SCP 9500375 9 - 1/2 8.624 0.438 0.377
SCP 4250282 4 - 1/4 3.692 0.279 0.282 SCP 10000375 10 9.124 0.438 0.377
SCP 4500282 4 - 1/2 3.74 0.279 0.282 SCP 12000375 12 11.124 0.438 0.377
SCP 4500312 4 - 1/2 3.908 0.296 0.312
116 HITECHSEALS.COM
CAT
C
Piston Rings
B A
Part CAT Part A B C

Number Number Bore Diameter Groove Diameter Groove Width
CAT 2000 5J7004 2.000 1.625 0.192
CAT 2500 8J6213 2.500 2.125 0.192
CAT 2750 5J7010 2.750 2.375 0.192
CAT 3000 6J1972 3.000 2.460 0.192
CAT 3250 6J0793 3.250 2.710 0.192
CAT 3500 5J7013 3.500 2.960 0.192
CAT 3750 5J8011 3.750 3.210 0.192
CAT 4000 5J5402 4.000 3.335 0.255
CAT 4250 5J7854 4.250 3.585 0.255
CAT 4500 5J4986 4.500 3.835 0.255
CAT 4750 5J4987 4.750 4.085 0.255
CAT 5000 5J5020 5.000 4.225 0.380
CAT 5250 5J7234 5.250 4.475 0.380
CAT 5500 5J4988 5.500 4.725 0.380
CAT 6000 5J4989 6.000 5.095 0.380
CAT 6250 5J4990 6.250 5.345 0.380
CAT 6500 5J4991 6.500 5.595 0.380
CAT 7000 5J4997 7.000 6.095 0.380
CAT 7250 5J4993 7.250 6.345 0.380
CAT 7500 9J7117 7.500 6.595 0.380
CAT 7750 5J7016 7.750 6.845 0.380
CAT 8250 5J5559 8.250 7.255 0.380
CAT 8500 6J9385 8.500 7.505 0.380
Our’ Caterpillar parts are not original equipment parts. Caterpillar part numbers are only provided as a
reference.
HITECHSEALS.COM 117
AQ Seals
E
C
R
Piston Rings
A B
Our Standard AQ seals are composed of a bronze filled PTFE ring

an internal O-ring, and an external quad ring.
AQ Seal are commonly used in piston accumulators and medium

duty hydraulic cylinders.
15-20°
Seal Dimensions Dash No. Gland Dimensions

A C B D R E
Groove Diametrical Clearance
Width
Part Bore C/S Height O.D. I.D. Groove +0.005 Groove 1000 3000 5075
Number* Dia. ± 0.003 (Axial) Loader Loader Dia. -0.000 Depth Radius PSI PSI PSI
AQ 2000 2 0.130 0.285 -133 -324 1.384 0.288 0.308 0.025 0.024 0.008 0.005
AQ 2250 2 - 1/4 0.130 0.285 -137 -326 1.634 0.288 0.308 0.025 0.024 0.008 0.005
AQ 2500 2 - 1/2 0.130 0.285 -141 -328 1.884 0.288 0.308 0.025 0.024 0.008 0.005
AQ 2750 2 - 3/4 0.130 0.285 -145 -330 2.134 0.288 0.308 0.025 0.024 0.008 0.005
AQ 3000 3 0.130 0.285 -149 -332 2.384 0.288 0.308 0.025 0.024 0.008 0.005
AQ 3500 3 - 1/2 0.130 0.285 -152 -336 2.884 0.288 0.308 0.025 0.024 0.008 0.005
AQ 4000 4 0.130 0.285 -154 -340 3.384 0.288 0.308 0.025 0.024 0.008 0.005
AQ 4500 4 - 1/2 0.130 0.285 -155 -344 3.884 0.288 0.308 0.025 0.024 0.008 0.005
AQ 5000 5 0.130 0.285 -158 -348 4.384 0.288 0.308 0.025 0.024 0.008 0.005
AQ 5500 5 - 1/2 0.187 0.370 -252 -426 4.660 0.375 0.420 0.035 0.030 0.010 0.006
AQ 6000 6 0.187 0.370 -256 -430 5.160 0.375 0.420 0.035 0.030 0.010 0.006
AQ 6500 6 - 1/2 0.187 0.370 -259 -434 5.660 0.375 0.420 0.035 0.030 0.010 0.006
AQ 7000 7 0.187 0.370 -261 -437 6.160 0.375 0.420 0.035 0.030 0.010 0.006
AQ 7500 7 - 1/2 0.187 0.370 -263 -439 6.660 0.375 0.420 0.035 0.030 0.010 0.006
AQ 8000 8 0.187 0.370 -265 -441 7.160 0.375 0.420 0.035 0.030 0.010 0.006
AQ 8500 8 - 1/2 0.187 0.370 -267 -443 7.660 0.375 0.420 0.035 0.030 0.010 0.006
AQ 9000 9 0.187 0.370 -269 -445 8.160 0.375 0.420 0.035 0.030 0.010 0.006
AQ 9500 9 - 1/2 0.187 0.370 -271 -446 8.660 0.375 0.420 0.035 0.030 0.010 0.006
AQ 10000 10 0.187 0.370 -273 -447 9.160 0.375 0.420 0.035 0.030 0.010 0.006
118 HITECHSEALS.COM
Cast Iron
E C
Piston Rings
A
C/S
Height
A C D R E
Seal Height Seal C/S Split Gap Groove Width Groove Max.
Part Bore Depth Extrusion
Number Diameter Min. Max. Min. Max. Min. Max. Min. Max. Min. Radius Gap
CI 1500 1.500 0.123 0.124 0.052 0.067 0.005 0.015 0.126 0.128 0.082 0.010 0.018
CI 1625 1.625 0.123 0.124 0.056 0.071 0.005 0.015 0.126 0.128 0.086 0.010 0.019
CI 1750 1.750 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 1875 1.875 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 2000 2.000 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 2250 2.250 0.186 0.187 0.070 0.085 0.005 0.015 0.189 0.191 0.100 0.010 0.023
CI 2375187 2.375 0.186 0.187 0.076 0.091 0.005 0.015 0.189 0.191 0.106 0.010 0.025
CI 2500 2.500 0.186 0.187 0.082 0.097 0.005 0.015 0.189 0.191 0.112 0.010 0.027
CI 2500125 2.500 0.123 0.124 0.082 0.097 0.005 0.015 0.126 0.128 0.112 0.010 0.027
CI 2625 2.625 0.186 0.187 0.087 0.102 0.005 0.015 0.189 0.191 0.117 0.010 0.028
CI 2750 2.750 0.186 0.187 0.091 0.106 0.005 0.015 0.189 0.191 0.121 0.010 0.030
CI 2750125 2.750 0.123 0.124 0.091 0.106 0.005 0.015 0.126 0.128 0.121 0.010 0.030
CI 2875 2.875 0.186 0.187 0.093 0.108 0.005 0.015 0.189 0.191 0.123 0.010 0.030
CI 3000 3.000 0.186 0.187 0.095 0.110 0.005 0.015 0.189 0.191 0.125 0.010 0.031
CI 3000125 3.000 0.123 0.124 0.095 0.110 0.005 0.015 0.126 0.128 0.125 0.010 0.031
CI 3000250 3.000 0.248 0.249 0.095 0.110 0.005 0.015 0.251 0.253 0.125 0.010 0.031
CI 3000312 3.000 0.310 0.311 0.095 0.110 0.005 0.015 0.313 0.315 0.125 0.010 0.031
CI 3250 3.250 0.186 0.187 0.103 0.118 0.005 0.015 0.189 0.191 0.133 0.010 0.033
CI 3250125 3.250 0.123 0.124 0.103 0.118 0.005 0.015 0.126 0.128 0.133 0.010 0.033
CI 3500 3.500 0.186 0.187 0.109 0.124 0.005 0.015 0.189 0.191 0.139 0.010 0.035
CI 3502 3.500 0.123 0.124 0.109 0.124 0.005 0.015 0.126 0.128 0.139 0.010 0.035
CI 3750 3.750 0.248 0.249 0.115 0.130 0.005 0.015 0.251 0.253 0.145 0.010 0.037
CI 3875 3.875 0.248 0.249 0.123 0.138 0.005 0.015 0.251 0.253 0.153 0.010 0.039
CI 4000 4.000 0.248 0.249 0.127 0.142 0.005 0.015 0.251 0.253 0.157 0.010 0.040
HITECHSEALS.COM 119
Cast Iron
Piston Rings
A C D R E
Seal Height Seal C/S Split Gap Groove Width Groove Max.
Part Bore Depth Extrusion
Number Diameter Min. Max. Min. Max. Min. Max. Min. Max. Min. Radius Gap
CI 4000187 4.000 0.186 0.187 0.127 0.142 0.005 0.015 0.189 0.191 0.157 0.010 0.040
CI 4000312 4.000 0.310 0.311 0.127 0.142 0.005 0.015 0.313 0.315 0.157 0.010 0.040
CI 4250 4.250 0.248 0.249 0.135 0.150 0.005 0.015 0.251 0.253 0.165 0.010 0.043
CI 4250187 4.250 0.186 0.187 0.135 0.150 0.005 0.015 0.189 0.191 0.165 0.010 0.043
CI 4500 4.500 0.248 0.249 0.145 0.160 0.005 0.015 0.251 0.253 0.175 0.010 0.046
CI 4500187 4.500 0.186 0.187 0.145 0.160 0.005 0.015 0.189 0.191 0.175 0.010 0.046
CI 4750 4.750 0.248 0.249 0.152 0.167 0.010 0.020 0.251 0.253 0.182 0.010 0.048
CI 5000 5.000 0.248 0.249 0.160 0.175 0.010 0.020 0.251 0.253 0.190 0.010 0.050
CI 5000187 5.000 0.186 0.186 0.160 0.175 0.010 0.020 0.189 0.191 0.190 0.010 0.050
CI 5000312 5.000 0.310 0.311 0.160 0.175 0.010 0.020 0.313 0.315 0.190 0.010 0.050
CI 5250 5.250 0.248 0.249 0.166 0.181 0.010 0.020 0.251 0.253 0.196 0.010 0.052
CI 5500 5.500 0.248 0.249 0.175 0.190 0.010 0.020 0.251 0.253 0.205 0.010 0.055
CI 550187 5.500 0.186 0.187 0.175 0.190 0.010 0.020 0.189 0.191 0.205 0.010 0.055
CI 6000 6.000 0.310 0.311 0.191 0.206 0.010 0.020 0.313 0.315 0.221 0.010 0.060
CI 6000250 6.000 0.248 0.249 0.191 0.206 0.010 0.020 0.251 0.253 0.221 0.010 0.060
CI 6500 6.500 0.310 0.311 0.211 0.226 0.010 0.020 0.313 0.315 0.241 0.010 0.066
CI 6750250 6.750 0.248 0.249 0.219 0.234 0.010 0.020 0.251 0.253 0.249 0.010 0.068
CI 7000 7.000 0.310 0.311 0.228 0.243 0.010 0.200 0.313 0.315 0.258 0.010 0.071
CI 7500250 7.500 0.248 0.249 0.244 0.259 0.010 0.020 0.251 0.253 0.274 0.010 0.075
CI 8000 8.000 0.372 0.373 0.260 0.275 0.010 0.020 0.375 0.377 0.290 0.010 0.080
CI 8000312 8.000 0.310 0.311 0.260 0.275 0.010 0.020 0.313 0.315 0.290 0.010 0.080
CI 8500250 8.500 0.248 0.249 0.275 0.290 0.010 0.020 0.251 0.253 0.305 0.010 0.085
CI 9000 9.000 0.372 0.373 0.294 0.309 0.010 0.020 0.375 0.377 0.324 0.010 0.090
CI 9000500 9.000 0.497 0.498 0.294 0.309 0.010 0.020 0.500 0.502 0.324 0.010 0.090
CI 10000 10.000 0.371 0.373 0.317 0.332 0.010 0.020 0.375 0.377 0.347 0.010 0.097
CI 12500500 12.500 0.496 0.498 0.389 0.419 0.010 0.020 0.500 0.502 0.434 0.010 0.121
120 HITECHSEALS.COM
Imperial Seals Fluid Seals
Elastomer Materials Temp. Range

Fluid Seals
Anti - Extrusion Material

Acetal -40°C to 100°C
Single Acting Single Acting Wear Ring Double Acting Loose Double Acting Locking
(SAF) (WR) (L/W) (L/W)
Product Description
Single acting fluid seals can work both as a piston or rod seal. A single acting fluid seals standard material is a nitrile sealing
element with a fabric reinforced base. Corresponding wear rings are sold separately. Contact us for dimension information
of single acting fluid seals with a wear ring.
Our double acting fluid seals are designed for use on split pistons. They are composed of a nitrile sealing element, fabric
reinforced base and two acetal wear rings.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___
O.D. WR - SAF Wear Ring

W - W Locking Style DAF
SAF - Single Acting LW - L/W Loose Style DAF
DAF - Double Acting Material - if other than standard
Example: DAF 2500LW - Double Acting Fluid Seal, Loose Wear Rings, 2.500” O.D., 1.875” I.D., 0.937 Height
HITECHSEALS.COM 121
Fluid Seals Imperial Seals
Single Acting Style

D C
R
Fluid Seals
A B
25°
A B C D R A B C D R
Number Dia. Dia. Width Radius Number Dia. Dia. Width Radius
SAF 1250 1.250 0.750 0.375 0.125 0.015 SAF 4002 4.000 3.000 0.625 0.250 0.032
SAF 1625 1.625 1.000 0.437 0.156 0.015 SAF 4001 4.000 3.250 0.562 0.187 0.032
SAF 1750 1.750 1.125 0.437 0.156 0.015 SAF 4000 4.000 3.250 0.500 0.187 0.032
SAF 1875 1.875 1.250 0.437 0.156 0.015 SAF 4125 4.125 3.375 0.562 0.187 0.032
SAF 2000 2.000 1.375 0.437 0.156 0.015 SAF 4250 4.250 3.500 0.562 0.187 0.032
SAF 2125 2.125 1.500 0.437 0.156 0.015 SAF 4500 4.500 3.500 0.562 0.250 0.032
SAF 2250 2.250 1.625 0.437 0.156 0.015 SAF 4625 4.625 3.625 0.750 0.250 0.032
SAF 2375 2.375 1.750 0.437 0.156 0.015 SAF 4750 4.750 3.750 0.750 0.250 0.032
SAF 2500 2.500 1.875 0.437 0.156 0.015 SAF 5000 5.000 4.250 0.562 0.187 0.032
SAF 2625 2.625 2.000 0.437 0.156 0.015 SAF 5250 5.250 4.250 0.750 0.250 0.032
SAF 2750 2.750 2.000 0.562 0.187 0.032 SAF 5500 5.500 4.500 0.750 0.250 0.032
SAF 2875 2.875 2.125 0.562 0.187 0.032 SAF 5750 5.750 4.750 0.750 0.250 0.032
SAF 3000 3.000 2.250 0.562 0.187 0.032 SAF 6000 6.000 5.250 0.562 0.250 0.032
SAF 3125 3.125 2.375 0.562 0.187 0.032 SAF 6250 6.250 5.250 0.875 0.250 0.032
SAF 3250 3.250 2.500 0.562 0.187 0.032 SAF 6500 6.500 5.500 0.750 0.250 0.032
SAF 3375 3.375 2.625 0.562 0.187 0.032 SAF 6750 6.750 5.750 0.750 0.250 0.032
SAF 3500 3.500 2.750 0.562 0.187 0.032 SAF 7000 7.000 6.000 0.750 0.250 0.032
SAF 3625 3.625 2.875 0.562 0.187 0.032 SAF 7750 7.750 6.500 1.000 0.250 0.046
SAF 3750 3.750 3.000 0.562 0.187 0.032 SAF 8000 8.000 7.000 0.875 0.250 0.032
Additional sizes are available upon request. Contact us for further information.
122 HITECHSEALS.COM
Imperial Seals Fluid Seals
Double Acting L/W Style
F C2
C1
25˚
R2
R1
Fluid Seals
B D E A
A B D E C1 C2 F R1 R2
Part Bore Groove Groove Piston
Number Diameter Diameter Step Dia. Diameter Groove Widths Min. Radius Max
DAF 0750LW 0.750 0.375 0.615 0.718 0.593 0.957 0.093 0.008 0.008
DAF 1000LW 1.000 0.625 0.865 0.968 0.593 0.957 0.093 0.008 0.008
DAF 1125LW 1.125 0.625 0.990 1.093 0.750 1.232 0.125 0.008 0.008
DAF 1250LW 1.250 0.750 1.115 1.218 0.750 1.240 0.125 0.008 0.008
DAF 1375LW 1.375 0.875 1.241 1.343 0.750 1.240 0.125 0.008 0.008
DAF 1500LW 1.500 1.000 1.365 1.468 0.750 1.240 0.125 0.008 0.008
DAF 1625LW 1.625 1.000 1.428 1.562 0.937 1.427 0.156 0.008 0.008
DAF 1750LW 1.750 1.125 1.552 1.687 0.937 1.427 0.156 0.008 0.008
DAF 2000LW 2.000 1.375 1.802 1.937 0.937 1.427 0.156 0.008 0.008
DAF 2250LW 2.250 1.625 2.052 2.187 0.937 1.427 0.156 0.008 0.008
DAF 2375LW 2.375 1.750 2.177 2.312 0.937 1.427 0.156 0.008 0.008
DAF 2500LW 2.500 1.875 2.302 2.437 0.937 1.427 0.156 0.008 0.008
DAF 2625LW 2.625 2.000 2.428 2.562 0.937 1.427 0.156 0.008 0.008
DAF 2750LW 2.750 2.000 2.482 2.687 1.187 1.677 0.187 0.008 0.008
DAF 3000LW 3.000 2.250 2.732 2.937 1.187 1.677 0.187 0.008 0.008
DAF 3250LW 3.250 2.500 2.982 3.187 1.187 1.677 0.187 0.008 0.008
DAF 3500LW 3.500 2.750 3.232 3.437 1.187 1.677 0.187 0.008 0.008
DAF 3750LW 3.750 3.000 3.482 3.687 1.187 1.677 0.187 0.008 0.008
DAF 4000LW 4.000 3.250 3.732 3.937 1.187 1.677 0.187 0.008 0.008
DAF 4250LW 4.250 3.500 3.982 4.187 1.187 1.677 0.187 0.008 0.008
DAF 4500LW 4.500 3.500 4.232 4.437 1.500 2.240 0.218 0.015 0.015
DAF 4750LW 4.750 3.750 4.482 4.687 1.500 2.240 0.218 0.015 0.015
DAF 5000LW 5.000 4.000 4.732 4.937 1.500 2.240 0.218 0.015 0.015
DAF 5250LW 5.250 4.250 4.982 5.187 1.500 2.240 0.218 0.015 0.015
DAF 5500LW 5.500 4.500 5.232 5.437 1.500 2.240 0.218 0.015 0.015
DAF 6000LW 6.000 5.000 5.732 5.937 1.500 2.240 0.218 0.015 0.015
DAF 6500LW 6.500 5.500 6.232 6.437 1.500 2.240 0.218 0.015 0.015
DAF 7000LW 7.000 6.000 6.732 6.937 1.500 2.240 0.218 0.015 0.015
Contact us for tolerance limits.
HITECHSEALS.COM 123
Fluid Seals Imperial Seals
Double Acting W Style

Fluid Seals
A B D E C1 C2 F R1 R2
Part Bore Groove Groove Piston
Number Diameter Diameter Step Dia. Diameter Groove Widths Min. Radius Max
DAF 1000W 1.000 0.625 0.883 0.964 0.468 0.968 0.093 0.008 0.008
DAF 1125W 1.125 0.625 0.986 1.083 0.500 1.000 0.125 0.015 0.008
DAF 1250W 1.250 0.750 1.111 1.208 0.625 1.125 0.125 0.015 0.008
DAF 1500W 1.500 1.000 1.360 1.458 0.625 1.125 0.125 0.015 0.008
DAF 1500W1 1.500 1.000 1.360 1.458 0.625 1.000 0.125 0.015 0.008
DAF 1625W 1.625 1.125 1.485 1.583 0.625 1.125 0.125 0.015 0.008
DAF 1750W 1.750 1.125 1.570 1.698 0.750 1.250 0.156 0.025 0.008
DAF 2000W 2.000 1.375 1.820 1.948 0.750 1.250 0.156 0.025 0.008
DAF 2125W 2.125 1.500 1.944 2.074 0.750 1.250 0.156 0.025 0.008
DAF 2250W 2.250 1.625 2.069 2.197 0.750 1.250 0.156 0.025 0.008
DAF 2375W 2.375 1.750 2.194 2.322 0.750 1.250 0.156 0.025 0.008
DAF 2500W 2.500 1.875 2.319 2.446 0.750 1.250 0.156 0.025 0.008
DAF 2500W1 2.500 1.875 2.302 2.437 0.937 1.437 0.156 0.025 0.008
DAF 2625W 2.625 2.000 2.443 2.571 0.750 1.250 0.156 0.025 0.008
DAF 2750W 2.750 2.000 2.522 2.685 0.937 1.437 0.187 0.031 0.008
DAF 3000W 3.000 2.250 2.772 2.935 0.937 1.437 0.187 0.031 0.008
DAF 3000W1 3.000 2.250 2.772 2.935 1.125 1.625 0.187 0.031 0.008
DAF 3125W 3.125 2.375 2.896 3.060 0.937 1.437 0.187 0.031 0.008
DAF 3250W 3.250 2.500 3.021 3.184 0.937 1.437 0.187 0.031 0.008
DAF 3500W 3.500 2.750 3.271 3.434 0.937 1.437 0.187 0.031 0.008
DAF 3750W 3.750 3.000 3.520 3.683 0.937 1.437 0.187 0.031 0.008
DAF 3875W 3.875 3.125 3.646 3.809 0.937 1.437 0.187 0.031 0.008
DAF 4000W 4.000 3.250 3.770 3.933 0.937 1.437 0.187 0.031 0.008
DAF 4250W 4.250 3.500 4.019 4.182 0.937 1.437 0.187 0.031 0.008
DAF 4500W 4.500 3.500 4.229 4.422 1.250 1.750 0.218 0.046 0.015
DAF 4500W1 4.500 3.500 4.229 4.422 1.500 2.000 0.218 0.046 0.015
DAF 4750W 4.750 3.750 4.478 4.671 1.250 1.750 0.218 0.046 0.015
DAF 5000W 5.000 4.000 4.728 4.921 1.250 1.750 0.218 0.046 0.015
DAF 5250W 5.250 4.250 4.977 5.170 1.250 1.750 0.218 0.046 0.015
DAF 5500W 5.500 4.500 5.227 5.420 1.250 1.750 0.218 0.046 0.015
DAF 5500W1 5.500 4.500 5.232 5.437 1.500 2.240 0.218 0.046 0.015
DAF 5750W 5.750 4.750 5.475 5.669 1.250 1.750 0.218 0.046 0.015
DAF 6000W 6.000 5.000 5.726 5.919 1.250 1.750 0.218 0.046 0.015
DAF 6500W 6.500 5.500 6.226 6.419 1.250 1.750 0.218 0.046 0.015
DAF 7000W 7.000 6.000 6.724 6.917 1.250 1.750 0.218 0.046 0.015
DAF 8000W 8.000 7.000 7.723 7.915 1.250 1.750 0.218 0.046 0.015
DAF 9500W 9.500 8.500 9.225 9.418 1.250 1.750 0.218 0.046 0.015
124 HITECHSEALS.COM
Imperial Seals Piston Cups
Piston Cups
Product Description
Piston cups seal on their outer lip and are held in place by a follower plate. To maximize product availability, our piston cups
do not come with a pre-cut bolt hole. Our machining department can quickly cut the appropriate hole size for an application.
We also stock Edbro and Renn piston cups in unique sizes. Contact us for more information.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___
O.D. Hole Diameter V - Viton™

R - Renn
PC - Fabric Reinforced Nitrile
PCH - Homogenous Nitrile
PCU - Urethane
PCE - Fabric Reinforced Nitrile (Edbro)
PCT - PTFE
Example: PCH 2500 - Homogenous Piston Cup, Nitrile, 2 - 1/2” Nom. O.D.
HITECHSEALS.COM 125
Piston Cups Imperial Seals
Piston Cups
Part Nominal Seal Dimensions Part Nominal Seal Dimensions

Number O.D. Height C/S Number O.D. Height C/S
PC 0375 3/8 1/4 3/32 PC 3750 3 - 3/4 5/8 5/32
PC 0500 1/2 7/16 3/32 PC 3875 3 - 7/8 5/8 5/32
PC 0562 9/16 5/16 3/32 PC 4000 4 5/8 5/32
PC 0625 5/8 9/32 3/32 PC 4250 4 - 1/4 5/8 5/32
PC 0687 11/16 5/16 3/32 PC 4500 4 - 1/2 5/8 5/32
PC 0750 3/4 7/16 3/32 PC 4750 4 - 3/4 5/8 5/32
PC 0812 13/16 5/16 3/32 PC 5000 5 3/4 3/16
PC 0875 7/8 3/8 3/32 PC 5250 5 - 1/4 3/4 3/16
PC 0937 15/16 5/16 3/32 PC 5500 5 - 1/2 3/4 3/16
PC 1000 1 7/16 3/32 PC 5750 5 - 3/4 3/4 3/16
PC 1125 1 - 1/8 7/16 3/32 PC 6000 6 3/4 3/16
PC 1250 1 - 1/4 7/16 3/32 PC 6125 6 - 1/8 3/4 3/16
PC 1375 1 - 3/8 7/16 3/32 PC 6250 6 - 1/4 3/4 3/16
PC 1437 1 - 7/16 1/2 1/8 PC 6500 6 - 1/2 3/4 3/16
PC 1500 1 - 1/2 1/2 1/8 PC 6750 6 - 3/4 3/4 3/16
PC 1562 1 - 9/16 1/2 1/8 PC 7000 7 3/4 3/16
PC 1625 1 - 5/8 1/2 1/8 PC 7250 7 - 1/4 3/4 3/16
PC 1750 1 - 3/4 1/2 1/8 PC 7500 7 - 1/2 3/4 3/16
PC 1812 1 -13/16 1/2 1/8 PC 7750 7 - 3/4 3/4 3/16
PC 1875 1 - 7/8 1/2 1/8 PC 8000 8 1 3/16
PC 2000 2 1/2 1/8 PC 8500 8 - 1/2 1 3/16
PC 2125 2 - 1/8 1/2 1/8 PC 9000 9 1 3/16
PC 2250 2 - 1/4 1/2 1/8 PC 9500 9 - 1/2 1 3/16
PC 2375 2 - 3/8 1/2 1/8 PC 9750 9 - 3/4 1 3/16
PC 2500 2 - 1/2 1/2 1/8 PC 10000 10 1 3/16
PC 2625 2 - 5/8 1/2 1/8 PC 10500 10 - 1/2 1 3/16
PC 2750 2 - 3/4 1/2 1/8 PC 11000 11 1 3/16
PC 2875 2 - 7/8 1/2 1/8 PC 11500 11 - 1/2 1 3/16
PC 3000 3 5/8 5/32 PC 11562 11 - 9/16 1 3/16
PC 3125 3 - 1/8 5/8 5/32 PC 12000 12 1 3/16
PC 3250 3 - 1/4 5/8 5/32 PC 12500 12 - 1/2 1 3/16
PC 3375 3 - 3/8 5/8 5/32 PC 14000 14 1 3/16
PC 3500 3 - 1/2 5/8 5/32 PC 14250 14 - 1/4 1 3/16
PC 3625 3 - 5/8 5/8 5/32 PC 16750 16 - 3/4 1 1/4
126 HITECHSEALS.COM
Imperial Seals Vee Packing
Vee Packing
Plastic Materials
Top (1) Centre (0) Bottom (2)
Product Description
Vee packing is a popular, highly adaptable sealing product. It is typically used in adjustable gland applications such as tele-
scoping truck hoists, pumps, and valves. Vee packing sets are composed of a top and bottom component with a varying
number of centre vees. Vee packing can be optimized by altering materials to accommodate different chemicals, tempera-
tures, and pressures.
Part Numbers:
V ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Stack Height

Material - if other than described by prefix
P - Fabric Rein. Nitrile/Neoprene 0 - Centre
PT - PTFE 1 - Top
PV - Fabric Rein. Fluorocarbon 2 - Bottom
BB - Blue/Black 3 - Homogenous Middle
S - Set
Example: VP 01870751 - Vee Packing, Top, Fabric Reinforced Female, 3/16” I.D., 3/4” O.D.
HITECHSEALS.COM 127
Vee Packing Imperial Seals
Vee Packing
The following Vee packing sizes are also available in Teflon™/PTFE (VPT) and Viton™/Fluorocarbon (VPV).
Part numbers ending with a 0, from the list below, represent center Vees. To indicate female (top)
Vees replace 0 with a 1, and to indicate male (bottom) Vees replace 0 with a 2.
Example: VP 01870750 (Vee) - VP 01870751 (Top) - VP 01870752 (Bottom)
Rubber Fabric Reinforced

# of Middle System Pressure System Pressure
Pieces (PSI) (PSI)
2 500 1000
3 1000 1500
4 2000 3000
5 3000 5000
6 5000 10000
Part Number I.D. O.D. Part Number I.D. O.D. Part Number I.D. O.D.
VP 01870750 3/16 3/4 VP 08121310 13/16 1 - 5/16 VP 12502250 1 - 1/4 2 - 1/4
VP 02500620 1/4 5/8 VP 08751250 7/8 1 - 1/4 VP 13121810 1 - 5/16 1 -13/16
VP 02500870 1/4 7/8 VP 08751370 7/8 1 - 3/8 VP 13751870 1 - 3/8 1 - 7/8
VP 03750750 3/8 3/4 VP 08751500 7/8 1 - 1/2 VP 13752000 1 - 3/8 2
VP 03750870 3/8 7/8 VP 10001370 1 1 - 3/8 VP 13752120 1 - 3/8 2 - 1/8
VP 03751000 3/8 1 VP 10001500 1 1 - 1/2 VP 15001870 1 - 1/2 1 - 7/8
VP 05000870 1/2 7/8 VP 10001620 1 1 - 5/8 VP 15002000 1 - 1/2 2
VP 05001000 1/2 1 VP 10001750 1 1 - 3/4 VP 15002120 1 - 1/2 2 - 1/8
VP 06251000 5/8 1 VP 11251620 1 - 1/8 1 - 5/8 VP 15002250 1 - 1/2 2 - 1/4
VP 06251120 5/8 1 - 1/8 VP 11251750 1 - 1/8 1 - 3/4 VP 15002500 1 - 1/2 2 - 1/2
VP 06251250 5/8 1 - 1/4 VP 11871560 1 - 3/16 1 - 9/16 VP 16252120 1 - 5/8 2 - 1/8
VP 07501120 3/4 1 - 1/8 VP 12501620 1 - 1/4 1 - 5/8 VP 16252250 1 - 5/8 2 - 1/4
VP 07501250 3/4 1 - 1/4 VP 12501750 1 - 1/4 1 - 3/4 VP 16252375 1 - 5/8 2 - 3/8
VP 07501370 3/4 1 - 3/8 VP 12501870 1 - 1/4 1 - 7/8 VP 17502250 1 - 3/4 2 - 1/4
VP 07501500 3/4 1 - 1/2 VP 12502000 1 - 1/4 2 VP 17502310 1 - 3/4 2 - 5/16
128 HITECHSEALS.COM
Vee Packing
Part Number I.D. O.D. Part Number I.D. O.D. Part Number I.D. O.D.
VP 17502370 1 - 3/4 2 - 3/8 VP 31253750 3 - 1/8 3 - 7/8 VP 50005870 5 5 - 7/8
VP 17502500 1 - 3/4 2 - 1/2 VP 32503620 3 - 1/4 3 - 5/8 VP 50006000 5 6
VP 17502750 1 - 3/4 2 - 3/4 VP 32503750 3 - 1/4 3 - 3/4 VP 50006500 5 6 - 1/2
VP 18752370 1 - 7/8 2 - 3/8 VP 32504000 3 - 1/4 4 VP 51255620 5 - 1/8 5 - 5/8
VP 18752500 1 - 7/8 2 - 1/2 VP 32504250 3 - 1/4 4 - 1/4 VP 52505750 5 - 1/4 5 - 3/4
VP 18752625 1 - 7/8 2 - 5/8 VP 32504500 3 - 1/4 4 - 1/2 VP 52506000 5 - 1/4 6
VP 19372430 1 -15/16 2 - 7/16 VP 33753870 3 - 3/8 3 - 7/8 VP 52506250 5 - 1/4 6 - 1/4
VP 20002500 2 2 - 1/2 VP 33754000 3 - 3/8 4 VP 55006000 5 - 1/2 6
VP 20002620 2 2 - 5/8 VP 33754120 3 - 3/8 4 - 1/8 VP 55006250 5 - 1/2 6 - 1/4
VP 20002750 2 2 - 3/4 VP 35004000 3 - 1/2 4 VP 55006500 5 - 1/2 6 - 1/2
VP 20003000 2 3 VP 35004250 3 - 1/2 4 - 1/4 VP 55007000 5 - 1/2 7
VP 21252620 2 - 1/8 2 - 5/8 VP 35004500 3 - 1/2 4 - 1/2 VP 57506370 5 - 3/4 6 - 3/8
VP 21252750 2 - 1/8 2 - 3/4 VP 35004750 3 - 1/2 4 - 3/4 VP 57506500 5 - 3/4 6 - 1/2
VP 21253000 2 - 1/8 3 VP 35005000 3 - 1/2 5 VP 57506750 5 - 3/4 6 - 3/4
VP 22502750 2 - 1/4 2 - 3/4 VP 37504250 3 - 3/4 4 - 1/4 VP 60006500 6 6 - 1/2
VP 22502870 2 - 1/4 2 - 7/8 VP 37504370 3 - 3/4 4 - 3/8 VP 60006750 6 6 - 3/4
VP 22503000 2 - 1/4 3 VP 37504500 3 - 3/4 4 - 1/2 VP 60007000 6 7
VP 22503250 2 - 1/4 3 - 1/4 VP 37504750 3 - 3/4 4 - 3/4 VP 62507000 6 - 1/4 7
VP 23752870 2 - 3/8 2 - 7/8 VP 38754500 3 - 7/8 4 - 1/2 VP 65007000 6 - 1/2 7
VP 23753000 2 - 3/8 3 VP 40004500 4 4 - 1/2 VP 65007250 6 - 1/2 7 - 1/4
VP 23753120 2 - 3/8 3 - 1/8 VP 40004750 4 4 - 3/4 VP 62507500 6 - 1/2 7 - 1/2
VP 24373310 2 - 7/16 3 - 5/16 VP 40004870 4 4 - 7/8 VP 65007750 6 - 1/2 7 - 3/4
VP 25002870 2 - 1/2 2 - 7/8 VP 40005000 4 5 VP 65008000 6 - 1/2 8
VP 25003000 2 - 1/2 3 VP 40005120 4 5 - 1/8 VP 67507250 6 - 3/4 7 - 1/4
VP 25003120 2 - 1/2 3 - 1/8 VP 42504750 4 - 1/4 4 - 3/4 VP 67507370 6 - 3/4 7 - 3/8
VP 25003250 2 - 1/2 3 - 1/4 VP 42505000 4 - 1/4 5 VP 67507500 6 - 3/4 7 - 1/2
VP 25003500 2 - 1/2 3 - 1/2 VP 42505120 4 - 1/4 5 - 1/8 VP 70007500 7 7 - 1/2
VP 26253120 2 - 5/8 3 - 1/8 VP 42505250 4 - 1/4 5 - 1/4 VP 70007750 7 7 - 3/4
VP 26253250 2 - 5/8 3 - 1/4 VP 45005000 4 - 1/2 5 VP 70008000 7 8
VP 27503250 2 - 3/4 3 - 1/4 VP 45005120 4 - 1/2 5 - 1/8 VP 75008000 7 - 1/2 8
VP 27503370 2 - 3/4 3 - 3/8 VP 45005250 4 - 1/2 5 - 1/4 VP 75008250 7 - 1/2 8 - 1/4
VP 27503500 2 - 3/4 3 - 1/2 VP 45005370 4 - 1/2 5 - 3/8 VP 75008500 7 - 1/2 8 - 1/2
VP 27503750 2 - 3/4 3 - 3/4 VP 45005500 4 - 1/2 5 - 1/2 VP 80008500 8 8 - 1/2
VP 28753370 2 - 7/8 3 - 3/8 VP 46255250 4 - 5/8 5 - 1/4 VP 80009000 8 9
VP 28753500 2 - 7/8 3 - 1/2 VP 47505250 4 - 3/4 5 - 1/4 VP 82509000 8 - 1/4 9
VP 28753620 2 - 7/8 3 - 5/8 VP 47505370 4 - 3/4 5 - 3/8 VP 90009500 9 9 - 1/2
VP 30003500 3 3 - 1/2 VP 47505500 4 - 3/4 5 - 1/2 VP 937510000 9 - 3/8 10
VP 30003620 3 3 - 5/8 VP 58755500 4 - 7/8 5 - 1/2 VP 975010500 9 - 3/4 10 - 1/2
VP 30003750 3 3 - 3/4 VP 48705625 4 - 7/8 5 - 5/8 VP 1000010750 10 10 - 3/4
VP 30004000 3 4 VP 50005500 5 5 - 1/2 VP 1100011750 11 11 - 3/4
VP 31253500 3 - 1/8 3 - 1/2 VP 50005750 5 5 - 3/4
HITECHSEALS.COM 129
Vee Packing Imperial Seals
Blue/Black Sets
C
Vee Packing
B A
Our Blue/Black Vee packing sets are constructed of Hytrel® (blue) and nylon (black) Vees. The sets' material properties make it ideal for operation in
fire resistant fluids. Blue/Black Vee packing sets are commonly used in heavy equipment and mining applications.
Sets ending with a G include the guidelock component. Guidelocks can also be purchased separately through us. Additional sizes and sets are avail-
able upon request.
A B C
Part Number Shaft Diameter Groove Diameter Groove Width Top Vee Height Set
VBB 15002000 1 - 1/2 2 1 1/4 1-5-1
VBB 20002500 2 2 - 1/2 1 1/4 1-5-1
VBB 20002500175G 2 2 - 1/2 1 - 3/4 1 1-5-1
VBB 22502750 2 - 1/4 2 - 3/4 1 1/4 1-5-1
VBB 22502750175 2 - 1/4 2 - 3/4 1 - 3/4 1 1-5-1
VBB 250030001750 2 - 1/2 3 1 - 3/4 1 1-5-1
VBB 30003500 3 3 - 1/2 1 1/4 1-5-1
VBB 30003500175 3 3 - 1/2 1 - 3/4 1 1-5-1
VBB 35004000G75 3 - 1/2 4 3/4 1/4 1-3-1
VBB 35004000G 3 - 1/2 4 1 1/4 1-5-1
VBB 40004500G 4 4 - 1/2 1 1/4 1 - 5 -1
VBB 450050001125 4 - 1/2 5 1 - 1/8 1/2 1-4-1
VBB 45005000 4 - 1/2 5 1 1/4 1-5-1
VBB 50005500G 5 5 - 1/2 1 1/4 1-5-1
VBB 550060001125 5 - 1/2 6 1 - 1/8 1/2 1-4-1
VBB 55006000 5 - 1/2 6 1 1/4 1 - 5 -1
VBB 60006500G 6 6 - 1/2 1 1/4 1-5-1
VBB 60006500125 6 6 - 1/2 1 - 1/4 1/2 1-5-1
130 HITECHSEALS.COM
Chemical Injection Sets
C
Vee Packing
A B
A B C A B C
Shaft Groove Groove Shaft Groove Groove
Part Number Dia. Dia. Width Material Part Number Dia. Dia. Width Material
VP 0187075S 3/16 3/4 1.05 Nitrile VPT 0250087S1080 1/4 7/8 1.08 PTFE
VP 0250087S 1/4 7/8 1 Nitrile VPT 0375087S0975 3/8 7/8 0.975 PTFE
VP 0250087S1 1/4 7/8 1.12 Nitrile VPT 0500100S0955 1/2 1 0.955 PTFE
VP 0375087S 3/8 7/8 1.12 Nitrile VPT 07501250S1135 3/4 1 - 1/4 1.135 PTFE
VP 0500100S1090 1/2 1 1.09 Nitrile VPT 10001500S1066 1 1 - 1/2 1.066 PTFE
VP 0750125S1 3/4 1 - 1/4 1 Nitrile VPT 1250175S1055 1 - 1/4 1 - 3/4 1.055 PTFE
VP 0875137S 7/8 1 - 3/8 1 Nitrile VPT 1250187S1175 1 - 1/4 1 - 3/4 1.175 PTFE
VP 0875137S1 7/8 1 - 3/8 1.12 Nitrile VPV 0250087S1100 1/4 7/8 1.12 Viton™
VP 1000150S 1 1 - 1/2 1.12 Nitrile VPV 0375087S1000 3/8 7/8 1 Viton™
VP 1250175S 1 1/4 1 - 3/4 1.12 Nitrile VPV 0500100S 1/2 1 1 Viton™
VP 0250087SROCK 1/4 7/8 1.12 Nitrile Hard VPV 1000150S 1 1 - 1/2 1.375 Viton™
VP 0375087SROCK 3/8 7/8 1 Nitrile Hard VPV 1250175S2 1 - 1/4 1 - 3/4 1.125 Viton™
VP 0500100SROCK 1/2 1 1 Nitrile Hard VP 0187075SF 3/16 1.06 Fluorosilicone
VP 0750125SROCK 3/4 1 - 1/4 1.375 Nitrile Hard VP 0250087SF 1/4 7/8 1.17 Fluorosilicone
VPT 01870750S1066 3/16 3/4 1.06 PTFE VP 0375087SF 3/8 7/8 1.17 Fluorosilicone
VPT 01870750S1010 3/16 3/4 1.01 PTFE VP 0500100SF 1/2 1 1.17 Fluorosilicone
HITECHSEALS.COM 131
Oil Seals Imperial Seals

Oil Seals
Single Lip (SL) Double Lip (DL) L1M L2M Agricultural
Product Description
Oil seals are used to seal fluids on rotating shafts at various speeds. They are available with either a single or double sealing lip.
In most cases, the secondary sealing lip on double lipped seals is used as an excluder to keep contaminants from entering the
system. Common oil seal applications include gear boxes, electric motors, and pumps. Oil seals for use on external rotation
applications are available upon request.
We offer our large bore L1M and L2M seal in imperial and metric sizes. L1M and L2M are used for heavy duty applications
such as equipment used in steel mills, pulp and paper plants, turbines, and more.
Part Numbers:
___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height Blank - Single Lip

DL - Double Lip
O - Nitrile XXX - Specific Style
OV - Viton™/Fluorocarbon
Example: O 0562 1125 250DL - Double Lip Oil Seal, Nitrile, 9/16” I.D., 1 - 1/8” O.D., 1/4” Height
132 HITECHSEALS.COM
Imperial Seals Oil Seals
C
0.031 R Max.
A B
Oil Seals
15-30°
* Available in single and double lip (DL) styles.
A B C A B C
Number Diameter Diameter Width Number Diameter Diameter Width
O 02500500125 1/4 1/2 1/8 O 06251125312 5/8 1 - 1/8 5/16
O 02500750250 1/4 3/4 1/4 O 06251125375 5/8 1 - 1/8 3/8
O 03120687312 5/16 11/16 5/16 O 06251250250* 5/8 1 - 1/4 1/4
O 03120750250 5/16 3/4 1/4 O 06251250312 5/8 1 - 1/4 5/16
O 03120875250 5/16 7/8 1/4 O 06251250375 5/8 1 - 1/4 3/8
O 03750563094 3/8 9/16 3/32 O 06251375250 5/8 1 - 3/8 1/4
O 03750750250 3/8 3/4 1/4 O 06251375312 5/8 1 - 3/8 5/16
O 03750875250DL 3/8 7/8 1/4 O 06251500250 5/8 1 - 1/2 1/4
O 04370875250DL 7/16 7/8 1/4 O 06251500375 5/8 1 - 1/2 3/8
O 04371000250 7/16 1 1/4 O 06871125250 11/16 1 - 1/8 1/4
O 04371125375 7/16 1 1/8 3/8 O 06871250250 11/16 1 - 1/4 1/4
O 05000875250* 1/2 7/8 1/4 O 06871375375 11/16 1 - 3/8 3/8
O 05001000187 1/2 1 3/16 O 07501000187 3/4 1 3/16
O 05001000250DL 1/2 1 1/4 O 07501125187 3/4 1 - 1/8 3/16
O 05001000312DL 1/2 1 5/16 O 07501125250DL 3/4 1 - 1/8 1/4
O 05001000375 1/2 1 3/8 O 07501187250 3/4 1 - 3/16 1/4
O 05001125250DL 1/2 1 - 1/8 1/4 O 07501250250* 3/4 1 - 1/4 1/4
O 05001125312 1/2 1 - 1/8 5/16 O 07501250312DL 3/4 1 - 1/4 5/16
O 05001125375 1/2 1 - 1/8 3/8 O 07501312250 3/4 1 - 5/16 1/4
O 05001250250 1/2 1 - 1/4 1/4 O 07501375250 3/4 1 - 3/8 1/4
O 05621000250DL 9/16 1 1/4 O 07501375312 3/4 1 - 3/8 5/16
O 05621125250DL 9/16 1 - 1/8 1/4 O 07501375375 3/4 1 - 3/8 3/8
O 06250937187 5/8 15/16 3/16 O 07501500250 3/4 1 - 1/2 1/4
O 06251000187 5/8 1 3/16 O 07501500312DL 3/4 1 - 1/2 5/16
O 06251000250 5/8 1 1/4 O 07501500375 3/4 1 - 1/2 3/8
O 06251125250* 5/8 1 - 1/8 1/4 O 07501625312 3/4 1 - 5/8 5/16
HITECHSEALS.COM 133
*Available in single and double lip (DL) styles.
A B C A B C
O 07501625375 3/4 1 - 5/8 3/8 O 11251687250DL 1 - 1/8 1 - 11/16 1/4
Oil Seals
O 07501750312 3/4 1 - 3/4 5/16 O 11251750312 1 - 1/8 1 - 3/4 5/16

O 08121187250 13/16 1 - 3/16 1/4 O 11251750375* 1 - 1/8 1 - 3/4 3/8
O 08121375250 13/16 1 - 3/8 1/4 O 11251875250 1 - 1/8 1 - 7/8 1/4
O 08121375312 13/16 1 - 3/8 5/16 O 11251875375DL 1 - 1/8 1 - 7/8 3/8
O 08121375375 13/16 1 - 3/8 3/8 O 11252000250DL 1 - 1/8 2 1/4
O 08121500250 13/16 1 - 1/2 1/4 O 11252000375DL 1 - 1/8 2 3/8
O 08751250187 7/8 1 - 1/4 3/16 O 11252000500 1 - 1/8 2 1/2
O 08751250250 7/8 1 - 1/4 1/4 O 11252062375 1 - 1/8 2 - 1/16 3/8
O 08751375375 7/8 1 - 3/8 3/8 O 11252125375 1 - 1/8 2 - 1/8 3/8
O 08751500250 7/8 1 - 1/2 1/4 O 11252250375 1 - 1/8 2 - 1/4 3/8
O 08751500375 7/8 1 - 1/2 3/8 O 11871687375 1 - 3/16 1 - 11/16 3/8
O 08751625375 7/8 1 - 5/8 3/8 O 11871750187 1 - 3/16 1 - 3/4 3/16
O 08751750375 7/8 1 - 3/4 3/8 O 11871750250 1 - 3/16 1 - 3/4 1/4
O 08751875375 7/8 1 - 7/8 3/8 O 11871875312 1 - 3/16 1 - 7/8 5/16
O 09371500375* 15/16 1 - 1/2 3/8 O 11872000250 1 - 3/16 2 1/4
O 09371625375 15/16 1 - 5/8 3/8 O 11872000312 1 - 3/16 2 5/16
O 09371750375 15/16 1 - 3/4 3/8 O 11872000375DL 1 - 3/16 2 3/8
O 10001250125 1 1 - 1/4 1/8 O 12501625250DL 1 - 1/4 1 - 5/8 1/4
O 10001375187 1 1 - 3/8 3/16 O 12501687250DL 1 - 1/4 1 - 11/16 1/4
O 10001375250DL 1 1 - 3/8 1/4 O 12501687375 1 - 1/4 1 - 11/16 3/8
O 10001437250 1 1 - 7/16 1/4 O 12501750250DL 1 - 1/4 1 - 3/4 1/4
O 10001500250DL 1 1 - 1/2 1/4 O 12501750375DL 1 - 1/4 1 - 3/4 3/8
O 10001500312 1 1 - 1/2 5/16 O 12501875250 1 - 1/4 1 - 7/8 1/4
O 10001500375DL 1 1 - 1/2 3/8 O 12501875312 1 - 1/4 1 - 7/8 5/16
O 10001625250 1 1 - 5/8 1/4 O 12501875375 1 - 1/4 1 - 7/8 3/8
O 10001625312 1 1 - 5/8 5/16 O 12502000250* 1 - 1/4 2 1/4
O 10001625375 1 1 - 5/8 3/8 O 12502000312DL 1 - 1/4 2 5/16
O 10001750250* 1 1 - 3/4 1/4 O 12502000375 1 - 1/4 2 3/8
O 10001750375 1 1 - 3/4 3/8 O 12502000500DL 1 - 1/4 2 1/2
O 10001875250 1 1 - 7/8 1/4 O 12502062375 1 - 1/4 2 - 1/16 3/8
O 10001875375 1 1 - 7/8 3/8 O 12502125312 1 - 1/4 2 - 1/8 5/16
O 10002000250 1 2 1/4 O 12502125375DL 1 - 1/4 2 - 1/8 3/8
O 10002000375DL 1 2 3/8 O 12502187437 1 - 1/4 2 - 3/16 7/16
O 10002000500 1 2 1/2 O 12502250312 1 - 1/4 2 - 1/4 5/16
O 10002250375 1 2 - 1/4 3/8 O 12502250375* 1 - 1/4 2 - 1/4 3/8
O 11251500250 1 - 1/8 1 - 1/2 1/4 O 12502250500 1 - 1/4 2 - 1/4 1/2
O 11251563375 1 - 1/8 1 - 9/16 3/8 O 12502375375 1 - 1/4 2 - 3/8 3/8
O 11251625250* 1 - 1/8 1 - 5/8 1/4 O 12502500375 1 - 1/4 2 - 1/2 3/8
O 11251625312* 1 - 1/8 1 - 5/8 5/16 O 13121875312 1 - 5/16 1 - 7/8 5/16
O 11251625375 1 - 1/8 1 - 5/8 3/8 O 13121937187 1 - 5/16 1 - 15/16 3/16
134 HITECHSEALS.COM
* Available in single and double lip (DL) styles.
A B C A B C
O 13122062312 1 - 5/16 2 - 1/16 5/16 O 15622500312 1 - 9/16 2 - 1/2 5/16
Oil Seals
O 13751875250* 1 - 3/8 1 - 7/8 1/4 O 15622500375 1 - 9/16 2 - 1/2 3/8
O 13751875312 1 - 3/8 1 - 7/8 5/16 O 15622500500DL 1 - 9/16 2 - 1/2 1/2
O 13752000312 1 - 3/8 2 5/16 O 16252000500 1 - 5/8 2 1/2
O 13752000375DL 1 - 3/8 2 3/8 O 16252125250 1 - 5/8 2 - 1/8 1/4
O 13752000500 1 - 3/8 2 1/2 O 16252187375 1 - 5/8 2 - 3/16 3/8
O 13752062250 1 - 3/8 2 - 1/16 1/4 O 16252250312 1 - 5/8 2 - 1/4 5/16
O 13752062375 1 - 3/8 2 - 1/16 3/8 O 16252250375DL 1 - 5/8 2 - 1/4 3/8
O 13752062500 1 - 3/8 2 - 1/16 1/2 O 16252375312 1 - 5/8 2 - 3/8 5/16
O 13752250312DL 1 - 3/8 2 - 1/4 5/16 O 16252375375* 1 - 5/8 2 - 3/8 3/8
O 13752250375DL 1 - 3/8 2 - 1/4 3/8 O 16252437500 1 - 5/8 2 - 7/16 1/2
O 13752250500 1 - 3/8 2 - 1/4 1/2 O 16252500375DL 1 - 5/8 2 - 1/2 3/8
O 13752375375DL 1 - 3/8 2 - 3/8 3/8 O 16252500500* 1 - 5/8 2 - 1/2 1/2
O 13752375500 1 - 3/8 2 - 3/8 1/2 O 16252625375DL 1 - 5/8 2 - 5/8 3/8
O 13752500375DL 1 - 3/8 2 - 1/2 3/8 O 16252750375 1 - 5/8 2 - 3/4 3/8
O 13752500500 1 - 3/8 2 - 1/2 1/2 O 16252750500 1 - 5/8 2 - 3/4 1/2
O 13752625375 1 - 3/8 2 - 5/8 3/8 O 16252875312 1 - 5/8 2 - 7/8 5/16
O 14372000312DL 1 - 7/16 2 5/16 O 16872500375 1 - 11/16 2 - 1/2 3/8
O 14372062312DL 1 - 7/16 2 - 1/16 5/16 O 16872500500 1 - 11/16 2 - 1/2 1/2
O 14372250375 1 - 7/16 2 - 1/4 3/8 O 16872687500 1 - 11/16 2 - 11/16 1/2
O 14372500500 1 - 7/16 2 - 1/2 1/2 O 17502125187 1 - 3/4 2 - 1/8 3/16
O 15002000187 1 - 1/2 2 3/16 O 17502250312 1 - 3/4 2 - 1/4 5/16
O 15002000250 1 - 1/2 2 1/4 O 17502250375DL 1 - 3/4 2 - 1/4 3/8
O 15002000500 1 - 1/2 2 1/2 O 17502312250DL 1 - 3/4 2 - 5/16 1/4
O 15002062250 1 - 1/2 2 - 1/16 1/4 O 17502375312* 1 - 3/4 2 - 3/8 5/16
O 15002062312 1 - 1/2 2 - 1/16 5/16 O 17502375375 1 - 3/4 2 - 3/8 3/8
O 15002125375* 1 - 1/2 2 - 1/8 3/8 O 17502437312 1 - 3/4 2 - 7/16 5/16
O 15002187375 1 - 1/2 2 - 3/16 3/8 O 17502437375 1 - 3/4 2 - 7/16 3/8
O 15002250250 1 - 1/2 2 - 1/4 1/4 O 17502500312* 1 - 3/4 2 - 1/2 5/16
O 15002250312* 1 - 1/2 2 - 1/4 5/16 O 17502500375DL 1 - 3/4 2 - 1/2 3/8
O 15002250375DL 1 - 1/2 2 - 1/4 3/8 O 17502500500 1 - 3/4 2 - 1/2 1/2
O 15002375375DL 1 - 1/2 2 - 3/8 3/8 O 17502562312 1 - 3/4 2 - 9/16 5/16
O 15002375437 1 - 1/2 2 - 3/8 7/16 O 17502625375DL 1 - 3/4 2 - 5/8 3/8
O 15002375500 1 - 1/2 2 - 3/8 1/2 O 17502625500 1 - 3/4 2 - 5/8 1/2
O 15002500312 1 - 1/2 2 - 1/2 5/16 O 17502687437 1 - 3/4 2 - 11/16 7/16
O 15002500375DL 1 - 1/2 2 - 1/2 3/8 O 17502750375DL 1 - 3/4 2 - 3/4 3/8
O 15002500500 1 - 1/2 2 - 1/2 1/2 O 17502750500DL 1 - 3/4 2 - 3/4 1/2
O 15002750375DL 1 - 1/2 2 - 3/4 3/8 O 17502875375DL 1 - 3/4 2 - 7/8 3/8
O 15002750500DL 1 - 1/2 2 - 3/4 1/2 O 17502875500 1 - 3/4 2 - 7/8 1/2
O 15622250375 1 - 9/16 2 - 1/4 3/8 O 17503000375DL 1 - 3/4 3 3/8
O 15622375375 1 - 9/16 2 - 3/8 3/8 O 17503187500 1 - 3/4 3 - 3/16 1/2
HITECHSEALS.COM 135
A B C A B C
O 18122500250 1 - 13/16 2 - 1/2 1/4 O 22503187500 2 - 1/4 3 - 3/16 1/2
O 18122500375 1 - 13/16 2 - 1/2 3/8 O 22503250500 2 - 1/4 3 - 1/4 1/2
Oil Seals
O 18122625375 1 - 13/16 2 - 5/8 3/8 O 22503375375 2 - 1/4 3 - 3/8 3/8

O 18123000375 1 - 13/16 3 3/8 O 22503375500DL 2 - 1/4 3 - 3/8 1/2
O 18752500312 1 - 7/8 2 - 1/2 5/16 O 22503500500DL 2 - 1/4 3 - 1/2 1/2
O 18752500375DL 1 - 7/8 2 - 1/2 3/8 O 22503625500DL 2 - 1/4 3 - 5/8 1/2
O 18752500500 1 - 7/8 2 - 1/2 1/2 O 23123125375 2 - 5/16 3 - 1/8 3/8
O 18752625375DL 1 - 7/8 2 - 5/8 3/8 O 23752875312DL 2 - 3/8 2 - 7/8 5/16
O 18752625500 1 - 7/8 2 - 5/8 1/2 O 23753000375DL 2 - 3/8 3 3/8
O 18752750375DL 1 - 7/8 2 - 3/4 3/8 O 23753125375DL 2 - 3/8 3 - 1/8 3/8
O 18752750500DL 1 - 7/8 2 - 3/4 1/2 O 23753250375DL 2 - 3/8 3 - 1/4 3/8
O 18752875375DL 1 - 7/8 2 - 7/8 3/8 O 23753250500 2 - 3/8 3 - 1/4 1/2
O 18752875500 1 - 7/8 2 - 7/8 1/2 O 23753375500DL 2 - 3/8 3 - 3/8 1/2
O 18753000375DL 1 - 7/8 3 3/8 O 23753500375 2 - 3/8 3 - 1/2 3/8
O 19372500375DL 1 - 15/16 2 - 1/2 3/8 O 23753500437 2 - 3/8 3 - 1/2 7/16
O 19372750375DL 1 - 15/16 2 - 3/4 3/8 O 23753500500DL 2 - 3/8 3 - 1/2 1/2
O 19373000500DL 1 - 15/16 3 1/2 O 24373250375 2 - 7/16 3 - 1/4 3/8
O 20002500250* 2 2 - 1/2 1/4 O 25003187375DL 2 - 1/2 3 - 3/16 3/8
O 20002625375DL 2 2 - 5/8 3/8 O 25003250375* 2 - 1/2 3 - 1/4 3/8
O 20002687375 2 2 - 11/16 3/8 O 25003250500 2 - 1/2 3 - 1/4 1/2
O 20002687500 2 2 - 11/16 1/2 O 25003375500 2 - 1/2 3 - 3/8 1/2
O 20002750250 2 2 - 3/4 1/4 O 25003500250 2 - 1/2 3 - 1/2 1/4
O 20002750375DL 2 2 - 3/4 3/8 O 25003500375 2 - 1/2 3 - 1/2 3/8
O 20002750437DL 2 2 - 3/4 7/16 O 25003500437 2 - 1/2 3 - 1/2 7/16
O 20002875375DL 2 2 - 7/8 3/8 O 25003500500DL 2 - 1/2 3 - 1/2 1/2
O 20002875500 2 2 - 7/8 1/2 O 25003625500 2 - 1/2 3 - 5/8 1/2
O 20003000375DL 2 3 3/8 O 26253375312 2 - 5/8 3 - 3/8 5/16
O 20003000500DL 2 3 1/2 O 26253375375DL 2 - 5/8 3 - 3/8 3/8
O 21252750312 2 - 1/8 2 - 3/4 5/16 O 26253500500DL 2 - 5/8 3 - 1/2 1/2
O 21252875375* 2 - 1/8 2 - 7/8 3/8 O 26253625375 2 - 5/8 3 - 5/8 3/8
O 21253000375* 2 - 1/8 3 3/8 O 26253625500DL 2 - 5/8 3 - 5/8 1/2
O 21253000500DL 2 - 1/8 3 1/2 O 26253750500DL 2 - 5/8 3 - 3/4 1/2
O 21253250375DL 2 - 1/8 3 - 1/4 3/8 O 26254000500 2 - 5/8 4 1/2
O 21253375500 2 - 1/8 3 - 3/8 1/2 O 27503500375* 2 - 3/4 3 - 1/2 3/8
O 21253500500 2 - 1/8 3 - 1/2 1/2 O 27503750375DL 2 - 3/4 3 - 3/4 3/8
O 21872875375 2 - 3/16 2 - 7/8 3/8 O 27503750500DL 2 - 3/4 3 - 3/4 1/2
O 21873000375DL 2 - 3/16 3 3/8 O 27503875500 2 - 3/4 3 - 7/8 1/2
O 22502875375 2 - 1/4 2 - 7/8 3/8 O 27504000500DL 2 - 3/4 4 1/2
O 22503000375DL 2 - 1/4 3 3/8 O 28753625375DL 2 - 7/8 3 - 5/8 3/8
O 22503000500 2 - 1/4 3 1/2 O 28753750375DL 2 - 7/8 3 - 3/4 3/8
O 22503125375 2 - 1/4 3 - 1/8 3/8 O 28753750500DL 2 - 7/8 3 - 3/4 1/2
136 HITECHSEALS.COM
A B C A B C
O 28753875500DL 2 - 7/8 3 - 7/8 1/2 O 40004875625DL 4 4 - 7/8 5/8
O 28754000500DL 2 - 7/8 4 1/2 O 40005000375 4 5 3/8
Oil Seals
O 29373750375 2 - 15/16 3 - 3/4 3/8 O 40005000500DL 4 5 1/2
O 30003750375DL 3 3 - 3/4 3/8 O 40005125500DL 4 5 - 1/8 1/2
O 30003875375 3 3 - 7/8 3/8 O 40005250438DL 4 5 - 1/4 7/16
O 30004000375DL 3 4 3/8 O 40005250500 4 5 - 1/4 1/2
O 30004000437 3 4 7/16 O 40005375437 4 5 - 3/8 7/16
O 30004000500DL 3 4 1/2 O 40005500500 4 5 - 1/2 1/2
O 30004375500DL 3 4 - 3/8 1/2 O 42504875375DL 4 - 1/4 4 - 7/8 3/8
O 30004500500DL 3 4 - 1/2 1/2 O 42505250500DL 4 - 1/4 5 - 1/4 1/2
O 30004000500DL 3 4 1/2 O 42505375500 4 - 1/4 5 - 3/8 1/2
O 31254000500 3 - 1/8 4 1/2 O 42505500500DL 4 - 1/4 5 - 1/2 1/2
O 31254125500 3 - 1/8 4 - 1/8 1/2 O 43755375500 4 - 3/8 5 - 3/8 1/2
O 31254500500 3 - 1/8 4 - 1/2 1/2 O 43755500500 4 - 3/8 5 - 1/2 1/2
O 31254500625 3 - 1/8 4 - 1/2 5/8 O 45005250437 4 - 1/2 5 - 1/4 7/16
O 32504000500DL 3 - 1/4 4 1/2 O 45005375437 4 - 1/2 5 - 3/8 7/16
O 32504250250 3 - 1/4 4 - 1/4 1/4 O 45005500437 4 - 1/2 5 - 1/2 7/16
O 32504250437 3 - 1/4 4 - 1/4 7/16 O 45005500500DL 4 - 1/2 5 - 1/2 1/2
O 32504250500DL 3 - 1/4 4 - 1/4 1/2 O 45005750500 4 - 1/2 5 - 3/4 1/2
O 32504500438DL 3 - 1/4 4 - 1/2 7/16 O 45006125562DL 4 - 1/2 6 - 1/8 9/16
O 32504750500DL 3 - 1/4 4 - 3/4 1/2 O 46255625500 4 - 5/8 5 - 5/8 1/2
O 33124500437DL 3 - 5/16 4 - 1/2 7/16 O 47505500375 4 - 3/4 5 - 1/2 3/8
O 33754000500 3 - 3/8 4 1/2 O 47505750500DL 4 - 3/4 5 - 3/4 1/2
O 33754375375DL 3 - 3/8 4 - 3/8 3/8 O 47506000562DL 4 - 3/4 6 9/16
O 33754375500 3 - 3/8 4 - 3/8 1/2 O 47506250500 4 - 3/4 6 - 1/4 1/2
O 33754500500 3 - 3/8 4 - 1/2 1/2 O 49376000500 4 - 15/16 6 1/2
O 35004125375 3 - 1/2 4 - 1/8 3/8 O 50005750437 5 5 - 3/4 7/16
O 35004250500 3 - 1/2 4 - 1/4 1/2 O 50005750500* 5 5 - 3/4 1/2
O 35004375500DL 3 - 1/2 4 - 3/8 1/2 O 50006000500DL 5 6 1/2
O 35004500375* 3 - 1/2 4 - 1/2 3/8 O 50006250500* 5 6 - 1/4 1/2
O 35004500500 3 - 1/2 4 - 1/2 1/2 O 52506250500 5 - 1/4 6 - 1/4 1/2
O 35004750500DL 3 - 1/2 4 - 3/4 1/2 O 55006750625DL 5 - 1/2 6 - 3/4 5/8
O 35005000500 3 - 1/2 5 1/2 O 58756875500DL 5 - 7/8 6 - 7/8 1/2
O 36254625500 3 - 5/8 4 - 5/8 1/2 O 62508000500DL 6 - 1/4 8 1/2
O 36254750500 3 - 5/8 4 - 3/4 1/2 O 65007500625 6 - 1/2 7 - 1/2 5/8
O 37504500500DL 3 - 3/4 4 - 1/2 1/2 O 70008000500* 7 8 1/2
O 37504750500DL 3 - 3/4 4 - 3/4 1/2 O 70008000625 7 8 5/8
O 37505000500 3 - 3/4 5 1/2 O 72508750562 7 - 1/4 8 - 3/4 9/16
O 37505250500 3 - 3/4 5 - 1/4 1/2 O 72508750625 7 - 1/4 8 - 3/4 5/8
O 38754875500 3 - 7/8 4 - 7/8 1/2 O 80009000500 8 9 1/2
O 38755000500DL 3 - 7/8 5 1/2 O 80009000625 8 9 5/8
HITECHSEALS.COM 137
L1M 0.031 R Max.

C
Height
B A
Oil Seals
Hi-Tech Seals standard L1M is composed of a steel outer case, a steel filler
ring, a stainless steel finger spring, and a nitrile/PTFE sealing element. The 15-30°
sealing element is also available in hydrogenated nitrile/ PTFE, silicone/
PTFE, and fluorocarbon/PTFE.
Imperial Metric Equivalent

A B C A B C
Part Shaft Groove Groove Shaft Groove Groove
Number Dia. Dia. Width Dia. Dia. Width Garlock Ref. #
O 38754875500L1M 3.875 4.875 0.500 98.42 123.82 12.70 53X-2501
O 40635125500L1M 4.063 5.125 0.500 103.20 130.17 12.70 53X-2570
O 43755375500L1M 4.375 5.375 0.500 111.12 136.52 12.70 53X-2708
O 46875750500L1M 4.687 5.750 0.500 119.04 146.05 12.70 53X-2819
O 48756000500L1M 4.875 6.000 0.500 123.82 152.40 12.70 53X-2873
O 50006250562L1M 5.000 6.250 0.562 127.00 158.75 14.27 53X-2922
O 55007000500L1M 5.500 7.000 0.500 139.70 177.80 12.70 53X-3188
O 56226785625L1M 5.622 6.874 0.625 142.80 174.60 15.87 53X-3192
O 57506875500L1M 5.750 6.875 0.500 146.05 174.62 12.70 53X-3278
O 57507000500L1M 5.750 7.000 0.500 146.05 177.80 12.70 53X-3293
O 58756875500L1M 5.875 6.875 0.500 149.23 174.62 12.70 53X-3316
O 58757000500L1M 5.875 7.000 0.500 149.23 177.80 12.70 53X-3319
O 58757125500L1M 5.875 7.125 0.500 149.23 180.98 12.70 53X-3322
O 60007000500L1M 6.000 7.000 0.500 152.40 177.80 12.70 53X-3355
O 60007250504L1M 6.000 7.250 0.504 152.40 184.15 12.80 53X-3361
O 60007250625L1M 6.000 7.250 0.625 152.40 184.15 15.87 53X-3363
O 60007500500L1M 6.000 7.500 0.500 152.40 190.50 12.70 53X-3367
O 62507750750L1M 6.250 7.750 0.750 158.75 196.85 19.05 53X-3405
O 65007500625L1M 6.500 7.500 0.625 165.10 190.50 15.87 53X-3426
O 65008000625L1M 6.500 8.000 0.625 165.10 203.20 15.87 53X-3434
O 66257743625L1M 6.625 7.743 0.625 168.27 196.67 15.87 53X-3436
O 67507750625L1M 6.750 7.750 0.625 171.45 196.85 15.87 53X-3456
O 67508000625L1M 6.750 8.000 0.625 171.45 203.20 15.87 53X-3460
O 70008000625L1M 7.000 8.000 0.625 177.80 203.20 15.87 53X-3492
O 70008500625L1M 7.000 8.500 0.625 177.80 215.90 15.87 53X-3500
O 71258250625L1M 7.125 8.250 0.625 180.97 209.55 15.87 53X-3508
O 72508500625L1M 7.250 8.500 0.625 184.15 215.90 15.87 53X-3522
O 72508750625L1M 7.250 8.750 0.625 184.15 222.25 15.88 53X-3526
O 78759375687L1M 7.875 9.375 0.687 200.02 238.12 17.45 53X-9176
O 79379125625L1M 7.937 9.125 0.625 201.59 231.77 15.87 53X-3590
O 80009000625L1M 8.000 9.000 0.625 203.20 228.60 15.87 53X-3592
138 HITECHSEALS.COM
L1M

A B C A B C
Oil Seals
O 80009500625L1M 8.000 9.500 0.625 203.20 241.30 15.87 53X-3600
O 80009500687L1M 8.000 9.500 0.687 203.20 241.30 17.45 53X-3921
O 80009500750L1M 8.000 9.500 0.750 203.20 241.30 19.05 53X-3601
O 800010000687L1M 8.000 10.000 0.687 203.20 254.00 17.45 53X-3924
O 825010250812L1M 8.250 10.250 0.812 209.55 260.35 20.62 53X-4499
O 83759875687L1M 8.375 9.875 0.687 212.72 250.82 17.45 53X-3933
O 850010000687L1M 8.500 10.000 0.687 215.90 254.00 17.45 53X-8453
O 850010500100L1M 8.500 10.500 1.000 215.90 266.70 25.40 53X-3610
O 862510125687L1M 8.625 10.125 0.687 219.07 257.17 17.45 53X-3939
O 875010250687L1M 8.750 10.250 0.687 222.25 260.35 17.45 53X-3946
O 875010250750L1M 8.750 10.250 0.750 222.25 260.35 19.05 53X-3104
O 900010500687L1M 9.000 10.500 0.687 228.60 266.70 17.45 53X-3954
O 900010500750L1M 9.000 10.500 0.750 228.60 266.70 19.05 53X-3619
O 900010507625L1M 9.000 10.507 0.625 228.60 266.87 15.87 53X-3620
O 900011000750L1M 9.000 11.000 0.750 228.60 279.40 19.05 53X-3623
O 900011000812L1M 9.000 11.000 0.812 228.60 279.40 20.63 53X-3122
O 912510625687L1M 9.125 10.625 0.687 231.77 269.87 17.45 53X-3957
O 912510750750L1M 9.125 10.750 0.750 231.77 273.05 19.05 53X-3959
O 925010500625L1M 9.250 10.500 0.625 234.95 266.70 15.87 53X-4511
O 925010750687L1M 9.250 10.750 0.687 234.95 273.05 17.45 53X-3963
O 937511000750L1M 9.375 11.000 0.750 238.12 279.40 19.05 53X-3972
O 937511375812L1M 9.375 11.375 0.812 238.12 288.92 20.62 53X-4610
O 950010500625L1M 9.500 10.500 0.625 241.30 266.70 15.87 53X-3977
O 950011250750L1M 9.500 11.250 0.750 241.30 285.75 19.05 53X-3981
O 950011500812L1M 9.500 11.500 0.812 241.30 292.10 20.62 53X-3984
O 975010750625L1M 9.750 10.750 0.625 247.65 273.05 15.87 53X-4513
O 975011250687L1M 9.750 11.250 0.687 247.65 285.75 17.45 53X-3985
O 1000011000562L1M 10.000 11.000 0.562 254.00 279.40 14.28 53X-3660
O 1000011500687L1M 10.000 11.500 0.687 254.00 292.10 17.45 53X-3992
O 1000011500750L1M 10.000 11.500 0.750 254.00 292.10 19.05 53X-3672
O 1000011750750L1M 10.000 11.750 0.750 254.00 298.45 19.05 53X-3994
O 1000011969100L1M 10.000 11.969 1.000 254.00 304.00 25.40 53X-3673
O 1000012000812L1M 10.000 12.000 0.812 254.00 304.80 20.62 53X-3997
O 1000012250812L1M 10.000 12.250 0.812 254.00 311.15 20.62 53X-3669
O 1012511625687L1M 10.125 11.625 0.687 257.17 295.27 17.45 53X-3999
O 1012511750687L1M 10.125 11.750 0.687 257.17 298.45 17.45 53X-5989
O 1025011750623L1M 10.250 11.750 0.623 260.35 298.45 15.82 53X-3123
O 1025011750687L1M 10.250 11.750 0.687 260.35 298.45 17.45 53X-4004
O 1025011750750L1M 10.250 11.750 0.750 260.35 298.45 19.05 53X-4005
O 1050012000687L1M 10.500 12.000 0.687 266.70 304.80 17.45 53X-4011
O 1050012000750L1M 10.500 12.000 0.750 266.70 304.80 19.05 53X-4012
O 1050012500750L1M 10.500 12.500 0.750 266.70 317.50 19.05 53X-3041
O 1050012500812L1M 10.500 12.500 0.812 266.70 317.50 20.62 53X-4017
O 1075012250562L1M 10.750 12.250 0.562 273.05 311.15 14.28 53X-3685
HITECHSEALS.COM 139
L2M 0.031 R Max. C
B A
Oil Seals
Hi-Tech Seals standard L2M is composed of a steel case with a stainless 15-30°
steel spring, and a nitrile lip. The L2M seal is also available in Viton™
and silicone.

A B C A B C
O 78759375687L2M 7.875 9.375 0.687 200.02 238.12 17.45 21238-64X-9176
O 80009500687L2M 8.000 9.500 0.687 203.20 241.30 17.45 21238-64X-3921
O 825010250812L2M 8.250 10.250 0.812 209.55 260.35 20.62 21238-64X-4499
O 83759875687L2M 8.375 9.875 0.687 212.72 250.82 17.45 21238-64X-3933
O 850010000687L2M 8.500 10.000 0.687 215.90 254.00 17.45 21238-64X-8453
O 862510125687L2M 8.625 10.125 0.687 219.07 257.17 17.45 21238-64X-3939
O 875010250687L2M 8.750 10.250 0.687 222.25 260.35 17.45 21238-64X-3946
O 900010500687L2M 9.000 10.500 0.687 228.60 266.70 17.45 21238-64X-3954
O 912510625687L2M 9.125 10.625 0.687 231.77 269.87 17.45 21238-64X-3957
O 925010750687L2M 9.250 10.750 0.687 234.95 273.05 17.45 21238-64X-3963
O 937511375812L2M 9.375 11.375 0.812 238.12 288.92 20.62 21238-64X-4610
O 950011250750L2M 9.500 11.250 0.750 241.30 285.75 19.05 21238-64X-3981
O 950011500812L2M 9.500 11.500 0.812 241.30 292.10 20.62 21238-64X-3984
O 975011250687L2M 9.750 11.250 0.687 247.65 285.75 17.45 21238-64X-3985
O 975011750687L2M 9.750 11.750 0.687 247.65 298.45 17.45 21238-64X-9425
O 1000011500687L2M 10.000 11.500 0.687 254.00 292.10 17.45 21238-64X-3992
O 1000012000812L2M 10.000 12.000 0.812 254.00 304.80 20.62 21238-64X-3997
O 1000012250812L2M 10.000 12.250 0.812 254.00 311.15 20.62 21238-64X-3669
O 1012511625687L2M 10.125 11.625 0.687 257.17 295.27 17.45 21238-64X-3999
O 1012511750687L2M 10.125 11.750 0.687 257.17 298.45 17.45 21238-64X-5989
O 1025011750687L2M 10.250 11.750 0.687 260.35 298.45 17.45 21238-64X-4004
O 1050012000687L2M 10.500 12.000 0.687 266.70 304.80 17.45 21238-64X-4011
O 1050012500812L2M 10.500 12.500 0.812 266.70 317.50 20.62 21238-64X-4017
O 1075012250687L2M 10.750 12.250 0.687 273.05 311.15 17.45 21238-64X-4023
O 1075012500875L2M 10.750 12.500 0.875 273.05 317.50 22.22 21238-64X-4033
O 1075012750625L2M 10.750 12.750 0.625 273.05 323.85 15.87 21238-64X-3014
O 1087512375687L2M 10.875 12.375 0.687 276.22 314.32 17.45 21238-64X-4027
O 1087512500687L2M 10.875 12.500 0.687 276.22 317.50 17.45 21238-64X-4028
O 1100012500687L2M 11.000 12.500 0.687 279.40 317.50 17.45 21238-64X-4611
O 1100013500687L2M 11.000 13.500 0.687 279.40 342.90 17.45 21238-64X-3060
O 1125012750750L2M 11.250 12.750 0.750 285.75 323.85 19.05 21238-64X-4046
O 1125012750687L2M 11.250 12.750 0.687 285.75 323.85 17.45 21238-64X-4527
140 HITECHSEALS.COM
Agricultural
Oil Seals
Part Number I.D. O.D. Height SE - ___ ___
SE 10 1.219 1.979 0.406
SE 11 1.500 2.328 0.500
Dash Number
SE 12 1.625 2.328 0.438
SE 13 1.750 2.718 0.359
SE 14 1.625 2.562 0.250
SE 16 2.000 3.623 0.250
SE 17 2.500 3.876 0.438
SE 18 2.125 3.371 0.375
SE 19 1.000 1.781 0.469
SE 24 2.094 2.718 0.359
SE 26 2.250 3.375 0.437
SE 28 1.500 2.623 0.250
SE 29 2.000 3.148 0.250
SE 30 2.000 3.543 0.438
HITECHSEALS.COM 141
Braided Packing Imperial Seals
Braided Packing
Material information is available within the next pages.
Product Description
Braided packing is a rope like material which is cut into rings that wrap around the rod. Once installed the compression force
generated by tightening of the gland produces radial pressure. Since braided packing expands radially when compressed, the
gland tolerances can be more flexible than when using vee packing.
We distribute braided packing based on weight, measured in pounds. However, Arochem, Kombilon, Univerdit, Carbosteam
and Ramilon are distributed in kg units. Braided packing is available in imperial and metric sizes. Contact us to receive a feet/
pound estimation on a specific material.
Part Numbers:
PKG - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
C/S Material Weight:

Blank - 1 lbs
5LB - 5 lbs
10LB - 10 lbs
Example: PKG 3753000G10LB - Braided Packing, 3000G Material, 10lbs, 3/8" C/S.
142 HITECHSEALS.COM
Imperial Seals Braided Packing
Braided Packing
Max. Shaft
Material Description Application Temp. Speed Pressure
Aramide filament, impregnated with PTFE and an Pump and valve packing, suitable for slurry and
300 260°C 2200 FPM 500 PSI
inert lubricant. abrasive service.
Kynol impregnated with PTFE suspensoid. Pumps and valves. Not suitable for sulfuric acid or
320 260°C 1500 FPM 500 PSI
strong bases.
344 PTFE fibre impregnated with PTFE suspensoid. Valve service with extreme chemicals. 260°C 1000 FPM 300 PSI
Pure PTFE fibre impregnated with PTFE suspensoid Pump service with extreme chemicals. Not suitable
344BIL 260°C 1800 FPM 300 PSI
and an inert break in lubricant. with molten alkalis.
FDA grade PTFE filament, impregnated with PTFE Valve service with extreme chemicals requiring
344FDA 260°C 1000 FPM 300 PSI
suspensoid. FDA grade packing.
Flax and ramie fibres impregnated with PTFE Marine applications.
345 90°C 1200 FPM 300 PSI
suspensoid and an inert lubricant.
895 Uncoated soft annealed copper wire. Acts as an anti‒extrusion ring. 540°C 1000 FPM 1000 PSI
Flax and ramie fibres, impregnated with tallow and Cold water, brine and marine services.
921 90°C 1000 FPM 150 PSI
wax lubricants.
Flax and ramie fibres, impregnated with tallow and Heavy duty hydraulic packing used in marine ap-
921G 90°C 1000 FPM 150 PSI
the surface is lubricated with graphite. plications involving oil or cold water.
Special acrylic yarn blend, impregnated with high Economical, general purpose pump and valve
3000G temperature lubricant and finished with particulate service. 230°C 1000 FPM 300 PSI
graphite.
Special acrylic yarn blend, impregnated with PTFE General pump and valve service.
3000T suspensoid. An inert lubricant is added for ease of 260°C 2200 FPM 500 PSI
start up.
Special acrylic yarn blend, impregnated with PTFE High speed pumps where non-contaminating
suspensoid. An inert lubricant is added for ease packing is desired.
3000TK 260°C 2200 FPM 500 PSI
of start up. This braided packing material also has
aramide corners.
HITECHSEALS.COM 143
Braided Packing Imperial Seals
Braided Packing
Max. Shaft
High temperature non‒asbestos valve stem and ex- Used when experiencing high temperature steam,
3030INA 650°C N/A 3000 PSI
pansion joint packing for moderate services. gases and hydrocarbons.
Non‒staining carbon yarn, impregnated with PTFE. Non‒staining general service pump and valve
4000 290°C 2000 FPM 500 PSI
packing.
Carbon yarn impregnated with a blocking agent General service pump and valve packing for use
4000G and lubricated with high temperature graphite. with solvents, petrochemicals, mild acids and 400°C 2000 FPM 500 PSI
alkalis.
Pure expanded flexible graphite. Flexible packing providing low friction, excellent
5000 1100°C 4000 FPM 2500 PSI¹
heat transfer and chemical resistance.
Pure expanded flexible graphite with corners of Flexible packing providing extrusion resistance,
5000C carbon yarn. low friction, excellent heat transfer and chemical 1100°C 4000 FPM 2500 PSI¹
resistance.
High density, Inconel® reinforced, flexible graphite Extreme service valve packing. Meets API 589/607
5000I 800°C N/A 4500 PSI
with colloidal graphite coating. fire test standards.
Inconel® reinforced expanded graphite, coated Valve service, certified to Fugitive Emissions Stan-
5000IFE 315°C N/A 500 PSI
with colloidal graphite. dards API 589/607.
Flexible graphite yarn impregnated with PTFE and Excellent for pump and valve service. Provides
5000T inert lube. good chemical resistance and heat dissipation 90°C 4000 FPM 500 PSI
properties.
Industrial grade graphite filament treated with a High shaft speed pump and valve applications.
8000LC 1900°C 4000 FPM 2500 PSI¹
special graphite coating to eliminate fraying. Suitable for extreme heat and aggressive chemicals.
Pure graphite yarn with a blocking agent and High shaft speed pump and valve applications.
8000G 650°C 4000 FPM 2500 PSI¹
graphite lubricant. Suitable for extreme heat and aggressive chemicals.
8000T GFO® fibre yarn. Suitable for acids, alkalis, solvents and steam. 290°C 4000 FPM 1800 PSI²
¹ 2500 PSI/170 BAR Valves, 500 PSI/34 BAR Pumps

² 1800 PSI/124 BAR Valves, 300 PSI/20 BAR Pumps
144 HITECHSEALS.COM
Imperial Seals Braided Packing
Braided Packing
Max. Shaft
GFO® fibre yarn braided with aramide corners. Pump packing which provides abrasion and extru-
8000TK 260°C 2000 FPM 500 PSI
sion resistance.
Anti‒friction lead foil, twisted over a soft fibreglass Boiler feed pumps or used as an end ring in con-
8010 core. High temperature oil and graphite lubricant junction with other packing where extrusion exists. 230°C 1000 FPM 1000 PSI
is added.
Anti‒friction aluminum foil, twisted over a fibre- For use in boiler feed pumps, in abrasive solutions
8011 glass core. High temperature oil and graphite lubri- and as an anti‒extrusion ring. 540°C 2000 FPM 1000 PSI
cant is added.
Anti‒friction lead foil. High temperature oil and Boiler feed pumps or used as an end ring in con-
8012 230°C 1000 FPM 1000 PSI
graphite lubricant is added. junction with other packing where extrusion exists.
Anti‒friction aluminum foil. High temperature oil For use in boiler feed pumps, abrasive solutions
8013 540°C 2000 FPM 1000 PSI
and graphite lubricant is added. and as an anti‒extrusion ring.
Dense but soft lubricated PTFE/graphite braided Pump packing which provides anti‒extrusion
8100BIL 275°C 2000 FPM 300 PSI
packing. properties.
8200BIL Dense PTFE/graphite braided packing. Economical multi‒purpose packing. 275°C 4000 FPM 300 PSI
Arochem (6212) is aramide yarn with PTFE. Plunger pumps. Provides strong chemical resis-
Arochem 280°C 400 FPM 7150 PSI
tance.
Kombilon(6742) is a carbon and PTFE yarn. Ideal for rotary pumps. Works well in agitators for
Kombilon 280°C 3900 FPM 362 PSI
the paper and chemical industries.
Univerdit (7000) is a PTFE/graphite compound. Pump and valve packing. Provides good resistance
Univerdit 250°C 1200 FPM 7250 PSI
to gas permeation.
Carbosteam (6550) is made of flexible carbon yarns Suitable for high temperature, high pressure and is
Carbosteam 399°C N/A 4350 PSI
impregnated with graphite. extrusion resistant.
Ramilon Ramilon (4586) is PTFE impregnated fibres. Economical water pump packing. 120°C 2500 FPM³ 580 PSI
³ 2500 FPM Rotary Pumps, 400 FPM Plunger Pumps
HITECHSEALS.COM 145
Protectors Imperial Seals

Low Density Polyethylene -70°C to 80°C
High Density Polyethylene -70°C to 80°C

Protectors
Caps & Plugs (CP) Hydraulic Fitting Plugs Bolted Flange Stud-hole Flange Stud-hole Flange
(HF) Protector (BFP) Protector (FC) Protector (FC)
Valve-Flange Tool Joint Protector Sucker Rod Cap (SR) & EUE Sleeve Mesh (SM)
Protector (FP) (TJP) Plugs (FPS)
Product Description
Our protector products are excellent for preventing damage to equipment during storage or transport. Additional protector
products are available upon request.
146 HITECHSEALS.COM
Imperial Seals Protectors
Caps & Plugs
F
D
C
Protectors
A
B
Composed of low density polyethylene.
Part Dimensions
Number A B C D E F
CP 0 0.174 0.241 0.110 0.177 0.410 0.380
CP 1 0.239 0.303 0.175 0.239 0.380 0.470
CP 1X 0.267 0.335 0.205 0.273 0.410 0.470
CP 2 0.299 0.367 0.235 0.303 0.410 0.500
CP 2X 0.331 0.397 0.267 0.333 0.380 0.560
CP 3 0.362 0.428 0.298 0.364 0.410 0.560
CP 3X 0.392 0.459 0.328 0.395 0.410 0.590
CP 4 0.422 0.486 0.358 0.422 0.410 0.620
CP 4X 0.448 0.512 0.384 0.448 0.410 0.660
CP 5 0.472 0.548 0.408 0.484 0.470 0.690
CP 5X 0.500 0.568 0.436 0.504 0.470 0.720
CP 6 0.533 0.608 0.469 0.544 0.470 0.750
CP 6X 0.551 0.633 0.487 0.569 0.500 0.780
CP 241S 0.552 0.612 0.490 0.550 0.340 0.750
CP 7 0.580 0.668 0.518 0.606 0.530 0.840
CP 7X 0.610 0.695 0.549 0.634 0.530 0.840
CP 8 0.642 0.729 0.578 0.665 0.500 0.880
CP 8X 0.678 0.755 0.614 0.691 0.530 0.880
CP 9 0.691 0.787 0.627 0.723 0.590 0.940
CP 9X 0.727 0.825 0.663 0.761 0.590 1.000
CP 710 0.750 0.805 0.688 0.743 0.190 0.860
CP 10 0.752 0.849 0.688 0.785 0.590 1.000
CP 11 0.803 0.912 0.739 8.480 0.660 1.060
CP 11x 0.819 0.933 0.755 0.869 0.620 1.130
CP 12 0.869 0.973 0.805 0.909 0.660 1.130
CP 12X 0.915 1.040 0.855 0.980 0.720 1.160
CP 13 0.967 1.092 0.903 1.028 0.780 1.250
CP 249W 0.975 1.104 0.918 1.047 0.750 1.440
CP 13B 0.980 1.049 0.916 0.985 0.500 1.250
CP 13X 0.997 1.144 0.933 1.080 0.780 1.310
CP 14 1.093 1.219 1.029 1.155 0.780 1.410
CP 14X 1.179 1.286 1.115 1.222 0.750 1.440
CP 15 1.226 1.354 1.162 1.290 0.750 1.500
CP 15X 1.233 1.358 1.175 1.300 0.840 1.500
HITECHSEALS.COM 147
Caps & Plugs

Protectors
Composed of high density polyethylene.
Part Dimensions
Number A B C D E F
CP 16 1.312 1.465 1.248 1.401 0.750 1.620
CP 17B 1.344 1.507 1.282 1.445 0.940 1.770
CP 17 1.451 1.601 1.387 1.537 0.750 1.750
CP 17S 1.519 1.602 1.455 1.538 0.750 1.750
CP 18 1.560 1.682 1.498 1.620 0.780 1.880
CP 18X 1.633 1.750 1.569 1.690 0.750 1.840
CP 19 1.752 1.882 1.688 1.818 0.780 2.000
CP 20 1.807 1.938 1.743 1.874 1.000 2.160
CP 210 1.847 2.000 1.783 1.936 1.030 2.130
CP 21 1.903 2.078 1.839 2.014 1.030 2.250
CP 220 1.981 2.133 1.917 2.069 1.000 2.250
CP 22S 2.017 2.147 1.953 2.083 0.750 2.310
CP 221 2.070 2.244 2.000 2.174 1.040 2.470
CP 230 2.136 2.312 2.074 2.250 1.030 2.560
CP 240 2.300 2.464 2.236 2.400 1.030 2.620
CP 33A 2.311 2.650 2.247 2.586 1.000 2.780
CP 250 2.396 2.604 2.332 2.540 1.160 2.810
CP 43A 2.457 2.750 2.395 2.688 1.000 2.880
CP 33A1 2.482 2.645 2.418 2.581 0.660 2.780
CP 44 2.641 2.790 2.579 2.728 0.784 2.970
CP 45A 2.720 2.990 2.656 2.926 1.000 3.130
CP 500 2.850 2.982 2.786 2.918 0.750 3.250
CP 55A 2.980 3.244 2.910 3.174 1.000 3.380
CP 53 2.996 3.159 2.916 3.079 0.470 3.410
CP 96A 3.270 3.562 3.200 3.492 1.120 3.690
CP 501 3.320 3.452 3.250 3.382 0.750 3.630
CP 1050 3.466 3.602 3.406 3.542 0.750 3.880
CP 341 3.552 3.732 3.478 3.658 1.000 4.000
CP 1052 3.676 3.802 3.596 3.722 0.750 4.000
CP 1063 3.928 4.074 3.848 3.994 0.750 4.380
CP 1070 4.214 4.459 4.134 4.379 1.000 4.940
CP 1072 4.368 4.622 4.288 4.542 1.000 5.000
CP 407 4.980 5.100 4.900 5.020 0.690 5.440
CP 344 5.326 5.494 5.217 5.385 0.880 5.880
CP 345 5.470 5.620 5.390 5.540 1.000 6.130
CP 351 6.008 6.184 5.918 6.094 1.000 6.630
CP 352 6.398 6.564 6.329 6.500 0.880 6.940
CP 365 6.668 6.774 6.562 6.668 1.500 7.190
CP 367 7.338 7.656 7.253 7.575 1.000 7.940
CP 368 7.658 7.846 7.574 7.762 1.000 8.120
CP 369 7.968 8.146 7.877 8.120 1.000 8.380
148 HITECHSEALS.COM
Hydraulic Fittings
C
Protectors
B
HF - ___ ___ ___ ___
Dash Number
Composed of high density polyethylene.
Part Suited For Dimensions

Number Thread Size Tubing Size SAE/JIC Fitting A B C
HF 4 3/8 - 24 3/16 3 0.180 0.460 0.560
HF 6 7/16 - 20 1/4 4 0.220 0.500 0.720
HF 8 1/2 - 20 5/16 5 0.250 0.530 0.810
HF 10 9/16 - 18 3/8 6 0.280 0.530 0.880
HF 11 5/8 - 18 3/8 - 0.250 0.590 0.940
HF 12 3/4 - 16 1/2 8 0.280 0.750 1.060
HF 14 7/8 - 14 5/8 10 0.280 0.840 1.250
HF 16 1 1/16 - 12 3/4 12 0.250 0.860 1.410
HF 17 1 1/16 - 14 3/4 - 0.250 0.860 1.410
HF 18 1 3/16 - 12 7/8 - 0.250 0.930 1.500
HF 20 1 5/16 - 12 1 16 0.250 0.910 1.750
HF 22 1 1/2 - 12 - - 0.310 0.930 1.810
HF 24 1 5/8 - 12 1 - 1/4 - 0.340 0.940 2.220
HF 26 1 3/4 - 12 - - 0.340 0.970 2.310
HF 28 1 7/8 - 12 1 - 1/2 - 0.380 1.060 2.470
HF 30 2 1/4 - 12 1 - 3/4 - 0.380 1.310 2.750
HF 32 2 1/2 - 12 2 - 0.380 1.310 3.090
HITECHSEALS.COM 149
Bolt Flange Protectors

A
Protectors
BFP - ___ ___ ___ ___ ___ ___ ___ ___
Nom. Pipe Size Blank - 3,000 PSI

6000 - 6,000 PSI
Composed of low density polyethylene. Bolt flange protectors are sized

for SAE code 61 3000 PSI.
For 3000 PSI
Part Number Nominal Pipe Size A B

BFP 0500 1/2 1.500 0.688
BFP 0750 3/4 1.875 0.875
BFP 1000 1 2.062 1.031
BFP 1250 1 - 1/4 2.312 1.188
BFP 1500 1 - 1/2 2.750 1.406
BFP 2000 2 3.062 1.688
BFP 2500 2 - 1/2 3.500 2.000
Composed of low density Polyethylene. Bolt flange protectors are

sized for SAE code 62 6000 PSI.
For 6000 PSI
Part Number Nominal Pipe Size A B

BFP 07506000 3/4 2.000 0.937
BFP 10006000 1 2.250 1.093
BFP 12506000 1 - 1/4 2.625 1.250
BFP 15006000 1 - 1/2 3.125 1.437
BFP 20006000 2 3.812 1.750
150 HITECHSEALS.COM
Stud-Hole Flange Protectors
Protectors
FC - ___ ___ ___ ___ ___
LB Pipe Size
Pressure represents ASA standard. For additional sizes and API pres-
sure ratings, please contact a Hi-Tech Seals representative.
Part Number LB Nominal Pipe Size Part Number LB Nominal Pipe Size
FC 1501 150 1” FC 3001 300 1”
FC 15015 150 1 - 1/2” FC 30015 300 1 - 1/2”
FC 1502 150 2” FC 3002 300 2”
FC 1503 150 3” FC 3003 300 3”
FC 1504 150 4” FC 3004 300 4”
FC 1506 150 6“ FC 3006 300 6”
FC 1508 150 8” FC 30010 300 10”
FC 15010 150 10” FC 30012 300 12”
FC 15012 150 12”
Part Number LB Nominal Pipe Size Part Number LB Nominal Pipe Size
FC 3008 300 8” FC 60012 600 12”
FC 6002 600 2” FC 9003 900 3”
FC 6004 600 4” FC 9004 900 4”
FC 6006 600 6” FC 9006 900 6”
FC 6008 600 8” FC 15002 1500 2”
FC 60010 600 10” FC 15003 1500 3”
HITECHSEALS.COM 151
Valve-Flange Protectors
E D
C
Protectors
A
B
Part Nominal Dimensions

Number Pipe Size A B C D E
FP 109 1/2 0.540 0.585 0.500 1.440 0.0250
FP 110 3/4 0.720 0.750 0.500 1.688 0.0030
FP 111 1 0.940 0.970 0.625 2.000 0.0030
FP 112 1 - 1/4 1.360 1.400 0.625 2.560 0.0040
FP 113 1 - 1/2 1.600 1.640 0.750 2.875 0.0040
FP 114 2 2.040 2.100 0.750 3.625 0.0050
FP 115 2 - 1/2 2.440 2.500 0.750 4.125 0.0050
FP 1151 2 - 1/2 2.440 2.500 0.750 5.125 0.0050
FP 116 3 3.014 3.150 0.730 6.050 0.0050
FP 117 3 - 1/2 3.510 3.635 0.750 5.590 0.0060
FP 118 4 4.000 4.140 0.980 6.310 0.0060
FP 119 5 5.020 5.080 1.000 7.312 0.0060
FP 120 6 6.040 6.100 1.000 8.500 0.0060
152 HITECHSEALS.COM
Tool Joint Protectors
TJP - ___ ___ ___ ___ ___ ___ ___

P - Pin (Cap)
Size Thread Type B - Box (Plug)
Protectors
Part Number Size Thread Type Type Part Number Size Thread Type Type
TJP 2375IFP 2 - 3/8 IF PIN TJP 4500REGP 4 - 1/2 REG PIN
TJP 2375IFB 2 - 3/8 IF BOX TJP 4500REGB 4 - 1/2 REG BOX
TJP 2375MWJP 2 - 3/8 Mayhew JR PIN TJP 4500H90P 4 - 1/2 H90 PIN
TJP 2375MWJB 2 - 3/8 Mayhew JR BOX TJP 4500H90B 4 - 1/2 H90 BOX
TJP 2375PACP 2 - 3/8 PAC PIN TJP 5000H90P 5 H90 PIN
TJP 2375PACB 2 - 3/8 PAC BOX TJP 5000H90B 5 H90 BOX
TJP 2375REGP 2 - 3/8 REG PIN TJP 5500REGP 5 - 1/2 REG PIN
TJP 2375REGB 2 - 3/8 REG BOX TJP 5500REGB 5 - 1/2 REG BOX
TJP 2875H90P 2 - 7/8 H90 PIN TJP 5500IFP 5 - 1/2 IF PIN
TJP 2875H90B 2 - 7/8 H90 BOX TJP 5500IFB 5 - 1/2 IF BOX
TJP 2875IFP 2 - 7/8 IF PIN TJP 5500H90P 5 - 1/2 H90 PIN
TJP 2875IFB 2 - 7/8 IF BOX TJP 5500H90B 5 - 1/2 H90 BOX
TJP 2875REGP 2 - 7/8 REG PIN TJP 6625IFP 6 - 5/8 IF PIN
TJP 2875REGB 2 - 7/8 REG BOX TJP 6625IFB 6 - 5/8 IF BOX
TJP 2875PACP 2 - 7/8 PAC PIN TJP 6625H90P 6 - 5/8 H90 PIN
TJP 2875PACB 2 - 7/8 PAC BOX TJP 6625H90B 6 - 5/8 H90 BOX
TJP 3500REGP 3 - 1/2 REG PIN TJP 6625REGP 6 - 5/8 REG PIN
TJP 3500REGB 3 - 1/2 REG BOX TJP 6625REGB 6 - 5/8 REG BOX
TJP 3500IFP 3 - 1/2 IF PIN TJP 7625REGP 7 - 5/8 REG PIN
TJP 3500IFB 3 - 1/2 IF BOX TJP 7625REGB 7 - 5/8 REG BOX
TJP 4000H90P 4 H90 PIN TJP 7625H90P 7 - 5/8 H90 PIN
TJP 4000H90B 4 H90 BOX TJP 7625H90B 7 - 5/8 H90 BOX
EUE Style
EUE - ___ ___ ___ ___ ___

P - Pin (Cap)
Size B - Box (Plug)
Part Number Size Type Part Number Size Type

EUE 1500B 1 - 1/2 BOX EUE 3500B 3 - 1/2 BOX
EUE 1500P 1 - 1/2 PIN EUE 3500P 3 - 1/2 PIN
EUE 2375B 2 - 3/8 BOX EUE 4000B 4 BOX
EUE 2375P 2 - 3/8 PIN EUE 4000P 4 PIN
EUE 2875B 2 - 7/8 BOX EUE 4500B 4 - 1/2 BOX
EUE 2875P 2 - 7/8 PIN EUE 4500P 4 - 1/2 PIN
HITECHSEALS.COM 153
Sucker Rod Caps
A B
Protectors
Part Dimensions
Number Shaft Size A B C
SR 5 5/8 0.935 1.240 1.680
SR 6 3/4 1.062 1.500 1.940
SR 7 7/8 1.188 1.630 2.160
SR 8 1 1.375 2.000 2.470
SR 9 1 - 1/8 1.563 2.250 2.750
Sucker rod caps are also available in push style.
Sucker Rod Plugs

B
A C
Dimensions
Part Number Coupling Size A B C
FPS 5 5/8 0.975 0.380 1.380
FPS 6 3/4 1.100 0.380 1.500
FPS 7 7/8 1.225 0.380 1.690
FPS 8 1 1.415 0.380 2.000
154 HITECHSEALS.COM
Sleeve Mesh
Protectors
SM - ___ ___ ___ ___ ___ ___ ___ ___
Dash Number MINI - Length 1

MAXI - Length 2
Part Number I.D. Fits Colour Feet/Unit

SM 014MINI 650
1/4 to 1/2 Yellow
SM 014MAXI 3000
SM 05MINI 550
1/2 to 1 Blue
SM 05MAXI 2750
SM 10MINI 340
1 to 1 - 1/2 Red
SM 10MAXI 1700
SM 1000MINI 500
1 to 2 Yellow
SM 1000MAXI 2500
SM 15MINI 180
1 - 1/2 to 2 Black
SM 15MAXI 900
SM 20MINI 160
2 to 2 - 1/2 White
SM 20MAXI 800
SM 2000MINI 300
2 to 4 Red
SM 2000MAXI 1500
SM 25MINI 120
2 - 1/2 to 3 Yellow
SM 25MAXI 600
SM 30MINI 90
3 to 4 Green
SM 30MAXI 450
SM 40MINI 80
4 to 5 Orange
SM 40MAXI 400
SM 50MINI 50
5 Brown
SM 50MAXI 400
SM 60MINI 6 Blue 50
SM 70MINI 7 Clear 40
Composed of Nylon weaved into a strong diamond pattern.
HITECHSEALS.COM 155
Retaining Rings Imperial Seals
Retaining Rings with Lugs Temp. Range

Carbon Spring Steel (SAE 1070-1090) -73°C to 260°C
Stainless Steel 15-7 MO (AMS 5520) -73°C to 482°C
Retaining Rings
Beryllium Copper -184°C to 343°C
Spiral Retaining Rings

Stainless Steel (AMS 5866) -73°C to 204°C
Carbon spring steel retaining rings sizes 306 and up have an

increased maximum temperature of 315°C.
Product Description
Retaining rings, also referred to as snap rings, are typically installed in a groove on the shaft or bore. The retaining ring acts
as a shoulder which holds components in place. The retaining ring is held in place by interference on either the I.D. or O.D.
Part Numbers:
EXT - __ __ __ __ __ __ __ __ __
Application Style: Material:

Diameter Blank - 5100 Series Blank - Carbon Steel
US - US Series SS - Stainless Steel
RS - RS Series B - Beryllium Copper
RST - RST Series
RSN - RSN Series
INT - __ __ __ __ __ __ __ __ __
Application Style: Material:

Diameter Blank - 5000 Series Blank - Carbon Steel
UR - UR Series SS - Stainless Steel
RR - RR Series B - Beryllium Copper
RRT - RRT Series
RRN - RRN Series
Example: EXT 050 US - External Spiral Retaining Ring, 0.500” Application Diameter, US Series, Carbon Steel
Example: INT 275 SS - Internal Retaining Ring with Lugs, 2.750” Application Diameter, 5000 Series, Stainless Steel
156 HITECHSEALS.COM
Imperial Seals Retaining Rings
Profiles
Retaining Rings With Lugs
External Internal
Retaining Rings
Series 5100 5000
Spiral Retaining Rings

Duty External Internal
Series US UR
LIGHT
Series RS RR
MEDIUM
Series RST RRT

MEDIUM/HEAVY
Series RSN RRN

HEAVY
HITECHSEALS.COM 157
Rock Bit Balls Imperial Seals
Rock Bit Balls
Product Description
S-2 Tool Steel, Rock Bit, Precision Balls are manufactured with ultimate ruggedness in mind. Utilizing the same steel com-
monly found in chisel ends and hammer heads, these balls provide the unparalleled resilience necessary for severe shock
loads. The smooth ground and polished finish, in combination with high accuracy of diameter and concentricity, make this
product ideally suited to the harsh demands of bearing assemblies in downhole drilling motor applications.
Inventoried items will include a diverse array of sizes from 3/16” through to 2” in diameter, standardized on a Grade 100
quality. Our product offering can be tailored to meet your needs, with options to purchase in bulk by the box, individually, or
combined with additional products in a custom assembled kit.
Our rock bit balls are available in 1/32 increments from ¼” to 2”. Common sizes include:
• 0.250” • 0.562” • 0.812” • 1.375”

• 0.312” • 0.593” • 0.875” • 1.500”
• 0.375” • 0.625” • 1.000” • 1.750”
• 0.437” • 0.687” • 1.125” • 2.000”
• 0.500” • 0.750” • 1.250”
Additional grades and sizes are available upon request.
Part Numbers:
HU ___
RBB - ___ - ___ ___
___ ___ ______
RB___
_________
______
___ ___
______ ___ ___
Diameter Steel Grade
Example: RBB0875RBG100, 7/8” Rock Bit Ball, Steel Grade 100
158 HITECHSEALS.COM
Imperial Seals Spherical Plain Bearings
Material Temp. Range
Spherical Plain Bearings

Steel-On-Steel* -60°C to 300°C
* Load carrying capacity is reduced at temperatures ex-

ceeding 180°C. Lubricant temperature ranges must also
be taken into account. Contact us if an application expe-
riences a high temperature range.
Non-Sealed Sealed
Product Description
The standard radial spherical plain bearing is characterized by an outer ring with a single split in the axial direction. The outer
and inner ring are made of chrome steel that is hardened and phosphate treated.
The sliding surface is treated with molybdenum disulfide. In addition to the treated sliding surface, the bearing receives
lubrication through ports on the inner and outer bearing wall. Due to the molybdenum disulfide treatment and ability to
self-lubricate, these bearings experience high wear resistance. This bearing performs well in applications exposed to dusty
environments.
Part Numbers:
SBB - GEZ ___ ___ ___ ES - ___ ___ ___
I.D. (mm) Blank - Unsealed Style

2RS - Sealed Style
Example: SBB GEZ25ES - Spherical Ball Bearing, Steel-On-Steel, Radial, Maintenance Required, 1.000” I.D., 1.625” O.D.
HITECHSEALS.COM 159
Spherical Plain Bearings Imperial Seals
Spherical Plain Bearings
B A
C2
C1
Additional styles and sizes available upon request.
Bearing Dimensions Basic Load Rating
Non-Sealed SBB Sealed SSB A B C1 C2 kN IKO Dash

Part Number Part Number I.D O.D Height Dynamic Static Number
SBB GEZ12ES Not Available 0.500 0.875 0.437 0.375 14 41.5 SBB 8
SBB GEZ15ES Not Available 0.625 1.063 0.547 0.469 21.6 65.5 SBB 10
SBB GEZ19ES Not Available 0.750 1.250 0.656 0.562 31.5 93 SBB 12
SBB GEZ22ES Not Available 0.875 1.438 0.765 0.656 42.5 127 SBB 14
SBB GEZ25ES SBB GEZ25ES-2RS 1.000 1.625 0.875 0.750 56 166 SBB 16 (-2RS)
SBB GEZ31ES SBB GEZ31ES-2RS 1.250 2.000 1.093 0.937 86.5 260 SBB 20 (-2RS)
160 HITECHSEALS.COM
Imperial Seals Bonded Washers
Bonded Washers
Temperature ranges are limited by the elastomers perfor-

mance range. Other materials are available upon request.
Fastener Seal Thread Seal Bonded Seal

600 Series (ST) 750 Series (TS) 400 Series (BS)
Product Description
Bonded washers are a modified standard washer. They consist of an outer ring of a hard material, typically steel, and an inner
ring of an elastomeric material that acts as a gasket. The bonded washers moulded elastomer lining helps prevent fluids from
leaking through bolt holes. Outer rings are also available in brass.
Part Numbers:
___ ___ - ___ ___ ___ ___
I.D.
ST - Fastener Seal
TS - Threaded Seal
BS - Bonded Seal
Example: ST 1000 - Fastener Seal, Intended for a 1.000” Thread Diameter, 0.988” Seal I.D., 1.760” O.D.
HITECHSEALS.COM 161
Bonded Washers Imperial Seals
Fastener Seal - 600 Series
D
Bonded Washers
C A B
A B C D
Part Fastener Thread I.D. O.D. Retainer
Number Size Diameter ± 0.010 Diameter Max. ± 0.010 Thickness
ST 138 #6 0.138 0.130 0.229 0.385 0.040 ± 0.004
ST 164 #8 0.164 0.156 0.255 0.385 0.040 ± 0.004
ST 190 #10 0.190 0.180 0.317 0.443 0.050 ± 0.005
ST 190OS #10 OS 0.190 0.186 0.365 0.468 0.050 ± 0.005
ST 250 1/4 0.250 0.240 0.381 0.505 0.050 ± 0.005
ST 250OS 1/4 OS 0.250 0.245 0.422 0.531 0.050 ± 0.005
ST 312 5/16 0.312 0.301 0.488 0.603 0.050 ± 0.005
ST 375 3/8 0.375 0.364 0.546 0.666 0.050 ± 0.005
ST 437 7/16 0.438 0.427 0.618 0.760 0.050 ± 0.005
ST 500 1/2 0.500 0.490 0.696 0.880 0.050 ± 0.005
ST 562 9/16 0.562 0.552 0.759 1.067 0.050 ± 0.005
ST 625 5/8 0.625 0.615 0.818 1.193 0.050 ± 0.005
ST 688 11/16 0.688 0.674 0.898 1.260 0.050 ± 0.005
ST 750 3/4 0.750 0.740 0.982 1.322 0.064 ± 0.005
ST 812 13/16 0.812 0.798 1.048 1.416 0.064 ± 0.005
ST 875 7/8 0.875 0.864 1.105 1.510 0.064 ± 0.005
ST 938 15/16 0.938 0.921 1.172 1.635 0.064 ± 0.005
ST 1000 1 1.000 0.988 1.234 1.760 0.064 ± 0.005
ST 1062 1 - 1/16 1.063 1.050 1.290 1.822 0.064 ± 0.005
ST 1125 1 - 1/8 1.125 1.106 1.351 1.885 0.064 ± 0.005
ST 1188 1 - 3/16 1.188 1.167 1.442 1.947 0.064 ± 0.005
ST 1250 1 - 1/4 1.250 1.229 1.474 2.010 0.064 ± 0.005
ST 1312 1 - 5/16 1.313 1.290 1.567 2.072 0.064 ± 0.005
ST 1375 1 - 3/8 1.375 1.352 1.631 2.135 0.064 ± 0.005
ST 1438 1 - 7/16 1.438 1.413 1.693 2.197 0.064 ± 0.005
ST 1500 1 - 1/2 1.500 1.475 1.817 2.260 0.091 ± 0.005
ST 1625 1 - 5/8 1.625 1.600 1.942 2.385 0.091 ± 0.005
ST 1750 1 - 3/4 1.750 1.725 2.067 2.510 0.091 ± 0.005
ST 1875 1 - 7/8 1.875 1.850 2.192 2.635 0.091 ± 0.005
ST 2000 2 2.000 1.975 2.317 2.760 0.091 ± 0.005
ST 3000 3 3.000 2.975 3.430 5.500 0.120 ± 0.005
162 HITECHSEALS.COM
Imperial Seals Bonded Washers
Thread Seal - 750 Series
B T
Bonded Washers
C
O.D.
T A B C
Retainer
Part UNC O.D. Thickness Clearance Min. Dia. of
Number (Coarse) UNF (Fine) ± 0.010 ± 0.005 Diameter Mating Surface Bore Depth
TS 006 32 40 0.406 0.050 0.143/0.149 3/8 3/64
TS 008 32 36 0.406 0.050 0.170/0.177 3/8 3/64
TS 010 24 32 0.469 0.050 0.198/0.206 3/8 1/16
TS 012 24 28 0.562 0.050 0.224/0.234 7/16 1/16
TS 250 20 28 0.562 0.050 0.260/0.271 7/16 1/16
TS 312 18 24 0.687 0.064 0.327/0.339 1/2 1/16
TS 375 16 24 0.750 0.064 0.392/0.406 5/8 1/16
TS 437 14 20 0.906 0.078 0.458/0.474 11/16 1/16
TS 500 13 20 1.000 0.078 0.523/0.541 3/4 1/16
TS 562 12 18 1.094 0.094 0.589/0.609 7/8 1/16
TS 625 11 18 1.187 0.094 0.654/0.676 1 1/16
TS 750 10 16 1.375 0.109 0.788/0.812 1 - 1/8 3/32
TS 875 9 14 1.562 0.109 0.921/0.947 1 - 1/4 3/32
TS 1000 8 12 1.750 0.120 1.054/1.082 1 - 7/16 3/32
TS 1125 8* 12 1.875 0.120 1.187/1.217 1 - 9/16 3/16
TS 1250 8* 12 2.000 0.120 1.321/1.353 1 - 11/16 3/16
TS 1375 8* 12 2.125 0.120 1.454/1.488 1 - 13/16 3/16
TS 1500 8* 12 2.250 0.120 1.587/1.623 1 - 15/16 3/16
TS 1750 5 N/A 3.375 0.179 1.865/1.920 2 - 7/16 3/8
Size 1 - 1/8 to 1 - 1/2 are not designed for standard coarse threads.
HITECHSEALS.COM 163
Bonded Washers Imperial Seals
Bonded Seals - 400 Series

C
Bonded Washers
B A
A B C D
O.D.
Part + 0.005 I.D. Metal
Number Bolt Size - 0.000 ±0.004 Thickness Total Height
BS 250 1/4 0.520 0.270 0.051 0.074
BS 312 5/16 0.560 0.340 0.051 0.074
BS 375 3/8 0.625 0.408 0.083 0.113
BS 437 7/16 0.750 0.460 0.083 0.113
BS 500 1/2 0.810 0.541 0.083 0.113
BS 562 9/16 0.875 0.585 0.083 0.113
BS 625 5/8 1.000 0.650 0.083 0.113
BS 687 11/16 1.000 0.715 0.097 0.127
BS 750 3/4 1.060 0.775 0.097 0.127
BS 812 13/16 1.125 0.848 0.097 0.127
BS 875 7/8 1.250 0.925 0.097 0.127
BS 1000 1 1.375 1.065 0.097 0.127
BS 1062 1 - 1/16 1.520 1.095 0.097 0.127
BS 1187 1 - 3/16 1.500 1.213 0.097 0.127
BS 1312 1 - 5/16 1.685 1.334 0.133 0.163
BS 1375 1 - 3/8 1.750 1.415 0.133 0.163
BS 1500 1 - 1/2 1.880 1.534 0.133 0.163
BS 1625 1 - 5/8 2.062 1.690 0.133 0.163
BS 1750 1 - 3/4 2.250 1.905 0.133 0.163
BS 1875 1 - 7/8 2.307 1.907 0.133 0.163
BS 2125 2 - 1/8 2.750 2.161 0.133 0.163
BS 2250 2 - 1/4 2.770 2.285 0.133 0.163
Additional sizes and torque information available through a Hi-Tech Seals representative.
164 HITECHSEALS.COM
Imperial Seals Vibration Mounts
Vibration Mounts
Evidgom® Radiaflex S.C. Mounting Beca Special Electronics
Product Description
With the increased mechanization of facility equipment, it is becoming increasingly essential to use proper vibration and noise
reduction components. Paulstra parts help improve working conditions, as well as extend the life of machinery. Their products
are used by a diverse group of industries including: Aerospace, Automotive, Civil Engineering, Electronics, Food & Beverage,
HVAC, Heavy Machinery Production, Marine, Military, Naval, Power Generation, and Rail Vehicle Systems.
Gain access to engineering support and the full Paulstra family of products through us. For part number and dimension infor-
mation visit www.paulstra-industry.com.
Part Numbers:
PAU - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Paulstra Reference #
Example: PAU 810035 - All Rubber Evidgom Stops
HITECHSEALS.COM 165
166 HITECHSEALS.COM
Metric Seals O-Rings
O-Rings
O-Rings
Fluorosilicone -56°C to 204°C
Product Description
O-rings are designed for both static and dynamic applications. A properly designed O-ring groove allows the O-ring to be
squeezed diametrically out-of-round even before the application of pressure. The O-ring seals by distortion of its resilient
elastic compound to fill the leakage path. Metric O-rings are available in standards DIN 3771, BS4518, ISO 3601, European
sizes, and JIS sizes. We also offer O-rings meeting different standards and custom sizes.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ The fourth I.D. digit is added to the part number when the I.D. contains a decimal place.
Prefix C/S I.D.*

O-Rings
MN7 - Nitrile ME7 - EPDM MTO - Teflon™
MN8 - Nitrile MH7 - Hydrogenated Nitrile MU8 - Urethane
MN9 - Nitrile MH8 - Hydrogenated Nitrile MU9 - Urethane
MV7 - Viton™ MH9 - Hydrogenated Nitrile MK7 - Kalrez®
MV8 - Viton™ MS7 - Silicone MK9 - Kalrez®
MV9 - Viton™ MA7 - Aflas® FEPM
Example: MN7 400145 - Nitrile, 70 Durometer - 4.00 mm C/S, 14.50 mm I.D.

Example: MH8 45105 - Hydrogenated Nitrile, 80 Durometer - 4.50 mm C/S, 105.00 mm I.D.
HITECHSEALS.COM 167
O-Rings Metric Seals
O-Ring Tolerances
I.D.
C/S
O-Rings
Information based on ISO 3601 Non-Standard Class A O-Rings.
Cross Section (C/S) Tolerance mm Inside Diameter (I.D) mm Tolerance mm

0.80 < C/S ≤ 3.15 ± 0.08 0.68 to 1.53 ± 0.10
3.15 < C/S ≤ 4.50 ± 0.10 1.54 to 11.69 ± 0.13
4.50 < C/S ≤ 6.30 ± 0.13 11.70 to 13.46 ± 0.15
6.30 < C/S ≤ 8.40 ± 0.15 13.47 to 17.53 ± 0.18
*9.00 ≤ C/S ≤ 20.00 ± 0.20 17.54 to 20.57 ± 0.20
20.58 to 23.88 ± 0.23
23.89 to 28.70 ± 0.25
*Based on DIN 3771.
28.71 to 35.56 ± 0.30
35.57 to 43.18 ± 0.36
Machining information and tolerances for various standards are
43.19 to 50.80 ± 0.41
available through us.
50.81 to 58.42 ± 0.46
Information provided in this catalogue is meant to aid with seal selec- 58.43 to 66.55 ± 0.51
tion process. Contact us for assistance in designing an application.
66.56 to 74.93 ± 0.56
74.94 to 83.57 ± 0.61
83.58 to 92.20 ± 0.66
92.21 to 101.60 ± 0.71
101.61 to 117.35 ± 0.76
117.36 to 141.22 ± 0.89
141.23 to 166.37 ± 1.02
166.38 to 192.02 ± 1.14
192.03 to 218.69 ± 1.27
218.70 to 253.37 ± 1.40
253.38 to 289.56 ± 1.52
289.57 to 347.98 ± 1.78
347.99 to 408.94 ± 2.03
408.95 to 472.44 ± 2.29
472.45 to 571.50 ± 2.54
571.51 to 711.20 ± 3.05
711.21 to 855.98 ± 3.56
855.99 to 1005.84 ± 4.06
1005.85 to 1163.32 ± 4.57
1163.33 to 1320.80 ± 5.08
168
168 HITECHSEALS.COM
Static Radial Applications
O-Rings
O-Rings
R
E/2
Information is based on DIN. 3771. D
D E C R
O-ring Diametrical Groove Width Groove Max.
C/S ± Gland Depth ± Clearance +0.13/-0.00 Radius Eccentricity
1.00 0.08 0.72 0.02 0.10 1.35 0.2 0.05
1.20 0.08 0.87 0.02 0.10 1.60 0.2 0.05
1.50 0.08 1.09 0.02 0.10 2.00 0.2 0.05
1.60 0.08 1.16 0.03 0.10 2.10 0.2 0.05
1.78 - 1.80 0.08 1.29 0.03 0.10 2.35 0.2 0.05
1.90 0.08 1.38 0.03 0.10 2.50 0.2 0.05
2.00 0.08 1.45 0.04 0.10 2.65 0.2 0.05
2.40 0.08 1.90 0.04 0.10 3.25 0.2 0.05
2.50 0.08 1.98 0.04 0.10 3.40 0.2 0.05
2.62 0.08 2.07 0.04 0.10 3.55 0.2 0.05
3.00 0.08 2.40 0.04 0.15 4.05 0.5 0.07
3.50 - 3.53 0.10 2.82 0.05 0.15 4.75 0.5 0.07
3.60 0.10 2.88 0.05 0.15 4.85 0.5 0.07
4.00 0.10 3.20 0.06 0.15 5.40 0.5 0.07
4.50 0.10 3.64 0.06 0.15 6.00 0.5 0.07
5.00 0.13 4.04 0.06 0.15 6.70 0.7 0.10
5.33- 5.34 0.13 4.31 0.08 0.15 7.15 0.7 0.10
5.50 0.13 4.45 0.08 0.15 7.35 0.7 0.10
5.70 0.13 4.61 0.08 0.15 7.65 0.7 0.10
6.00 0.13 4.91 0.08 0.18 8.15 0.7 0.13
6.99 0.15 5.72 0.10 0.18 9.50 0.7 0.13
7.00 0.15 5.73 0.10 0.18 9.55 0.7 0.13
7.50 0.15 6.14 0.10 0.18 10.20 1.0 0.13
8.00 0.18 6.55 0.10 0.18 10.90 1.0 0.13
8.40 0.18 6.87 0.15 0.18 11.45 1.0 0.13
9.00 0.2 7.65 0.15 0.18 11.85 1.0 0.13
10.0 0.2 8.50 0.15 0.18 13.20 1.0 0.13
11.0 0.2 9.35 0.15 0.18 14.50 1.0 0.13
12.0 0.2 10.20 0.15 0.18 15.85 1.5 0.13
13.0 0.2 11.05 0.15 0.18 17.15 1.5 0.13
14.0 0.2 11.90 0.3 0.18 18.45 1.5 0.13
16.0 0.2 13.60 0.3 0.18 21.10 1.5 0.13
18.0 0.2 15.30 0.3 0.18 23.75 1.5 0.13
20.0 0.2 17.00 0.3 0.18 26.40 1.5 0.13
HITECHSEALS.COM 169
Static Axial (Face) Applications
C
O-Rings
D
O-Rings
Information is based on DIN. 3771.
D C
Groove Width
O-Ring Hydraulic Pneumatic
C/S ± Gland Depth ± +0.13/-0.00 ± 0.13
1.00 0.08 0.75 0.02 1.45 1.20
1.20 0.08 0.90 0.02 1.75 1.45
1.50 0.08 1.13 0.02 2.20 1.80
1.60 0.08 1.20 0.03 2.35 1.90
1.78 - 1.80 0.08 1.34 0.03 2.60 2.15
1.90 0.08 1.43 0.03 2.75 2.30
2.00 0.08 1.51 0.04 2.90 2.40
2.40 0.08 1.82 0.04 3.20 2.80
2.50 0.08 1.90 0.04 3.30 2.90
2.62 0.08 1.99 0.04 3.50 3.05
3.00 0.08 2.27 0.04 3.90 3.45
3.50 - 3.53 0.10 2.67 0.05 4.60 4.05
3.60 0.10 2.72 0.05 4.70 4.10
4.00 0.10 3.03 0.06 5.25 4.60
4.50 0.10 3.60 0.06 6.10 5.10
5.00 0.13 4.00 0.06 6.80 5.70
5.33 0.13 4.26 0.08 7.25 6.05
5.50 0.13 4.40 0.08 7.45 6.25
5.70 0.13 4.56 0.08 7.75 6.50
6.00 0.13 4.98 0.08 8.00 6.75
6.99 0.15 5.80 0.10 9.05 7.85
7.00 0.15 5.81 0.10 9.05 7.90
7.50 0.15 6.23 0.10 9.70 8.40
8.00 0.15 6.64 0.10 10.35 9.00
8.40 0.15 6.97 0.15 10.90 9.45
170 HITECHSEALS.COM
Reciprocating Applications
C C E/2
D
D
O-Rings
O-Rings
E/2
Information is based on DIN. 3771.
D E C
O-Ring Diametrical Groove Width Max.
C/S ± Gland Depth ± Clearance +0.13/-0.00 Eccentricity
1.00 0.08 0.80 0.02 0.10 1.35 0.05
1.20 0.08 0.96 0.02 0.10 1.60 0.05
1.50 0.08 1.20 0.02 0.10 2.00 0.05
1.60 0.08 1.28 0.03 0.10 2.10 0.05
1.78 - 1.80 0.08 1.42 0.03 0.10 2.40 0.05
1.90 0.08 1.52 0.03 0.10 2.50 0.05
2.00 0.08 1.60 0.04 0.10 2.65 0.05
2.40 0.08 2.06 0.04 0.10 3.25 0.05
2.50 0.08 2.15 0.04 0.10 3.40 0.05
2.62 0.08 2.25 0.04 0.10 3.55 0.05
3.00 0.08 2.61 0.04 0.15 4.05 0.07
3.50 - 3.53 0.10 3.07 0.05 0.15 4.75 0.07
3.60 0.10 3.13 0.05 0.15 4.85 0.07
4.00 0.10 3.48 0.05 0.15 5.40 0.07
4.50 0.10 3.99 0.05 0.15 6.00 0.07
5.00 0.13 4.44 0.05 0.15 6.70 0.10
5.33- 5.34 0.13 4.73 0.05 0.15 7.15 0.10
5.50 0.13 4.88 0.05 0.15 7.40 0.10
5.70 0.13 5.06 0.05 0.15 7.60 0.10
6.00 0.13 5.19 0.05 0.18 8.15 0.13
6.99 0.15 6.05 0.05 0.18 9.50 0.13
7.00 0.15 6.06 0.05 0.18 9.55 0.13
7.50 0.15 6.49 0.05 0.18 10.20 0.13
8.00 0.18 6.92 0.05 0.18 10.90 0.13
8.40 0.18 7.27 0.05 0.18 11.45 0.13
9.00 0.20 7.92 0.05 0.18 12.10 0.13
10.00 0.20 8.80 0.05 0.18 13.40 0.13
HITECHSEALS.COM 171
O-Rings
O-Rings
Part Cross Part Cross Part Cross

Number C/S I.D. Ref. # Number C/S I.D. Ref. # Number C/S I.D. Ref. #
1000115 1.00 1.15 100195 1.00 19.50 15004 1.50 4.00
1000125 1.00 1.25 10020 1.00 20.00 150045 1.50 4.50 S5
100015 1.00 1.50 100205 1.00 20.50 15005 1.50 5.00
100018 1.00 1.80 10021 1.00 21.00 150055 1.50 5.50 S6
10002 1.00 2.00 100215 1.00 21.50 15006 1.50 6.00
100025 1.00 2.50 10022 1.00 22.00 150065 1.50 6.50 S7
100027 1.00 2.70 100225 1.00 22.50 15007 1.50 7.00
10003 1.00 3.00 10023 1.00 23.00 150075 1.50 7.50 S8
100033 1.00 3.30 100235 1.00 23.50 15008 1.50 8.00
100035 1.00 3.50 10024 1.00 24.00 150085 1.50 8.50 S9
10004 1.00 4.00 100245 1.00 24.50 15009 1.50 9.00
100045 1.00 4.50 10025 1.00 25.00 150095 1.50 9.50 S 10
10005 1.00 5.00 10028 1.00 28.00 15010 1.50 10.00
100055 1.00 5.50 100294 1.00 29.40 150105 1.50 10.50
10006 1.00 6.00 100299 1.00 29.90 150107 1.50 10.70 S 11.2
100065 1.00 6.50 100305 1.00 30.50 15011 1.50 11.00
10007 1.00 7.00 100318 1.00 31.80 150115 1.50 11.50 S 12
100072 1.00 7.20 10032 1.00 32.00 15012 1.50 12.00 S 12.5
100075 1.00 7.50 10039 1.00 39.00 150125 1.50 12.50
10008 1.00 8.00 10042 1.00 42.00 15013 1.50 13.00
100085 1.00 8.50 10060 1.00 60.00 1501325 1.50 13.25
10009 1.00 9.00 -001 1.02 0.74 -001 150135 1.50 13.50 S 14
100095 1.00 9.50 120025 1.20 2.50 15014 1.50 14.00
10010 1.00 10.00 120026 1.20 2.60 15015 1.50 15.00
100105 1.00 10.50 120035 1.20 3.50 150155 1.50 15.50 S 16
10011 1.00 11.00 12005 1.20 5.00 15016 1.50 16.00
100115 1.00 11.50 12024 1.20 24.00 150165 1.50 16.50
10012 1.00 12.00 12026 1.20 26.00 15017 1.50 17.00
100125 1.00 12.50 12028 1.20 28.00 150175 1.50 17.50 S 18
10013 1.00 13.00 12035 1.20 35.00 15018 1.50 18.00
100135 1.00 13.50 12040 1.20 40.00 150185 1.50 18.50
10014 1.00 14.00 120535 1.20 53.50 15019 1.50 19.00
100145 1.00 14.50 12098 1.20 98.00 150195 1.50 19.50 S 20
10015 1.00 15.00 -002 1.27 1.07 -002 15020 1.50 20.00
100155 1.00 15.50 150018 1.50 1.80 150205 1.50 20.50
10016 1.00 16.00 1500185 1.50 1.85 15021 1.50 21.00
100165 1.00 16.50 15002 1.50 2.00 150215 1.50 21.5 S 22
10017 1.00 17.00 150025 1.50 2.50 S3 15022 1.50 22.00
10018 1.00 18.00 150028 1.50 2.80 150225 1.50 22.50
100185 1.00 18.50 15003 1.50 3.00 15023 1.50 23.00
10019 1.00 19.00 150035 1.50 3.50 S4 150235 1.50 23.50
172 HITECHSEALS.COM
15024 1.50 24.00 15056 1.50 56.00 160022 1.60 2.20
150245 1.50 24.50 15057 1.50 57.00 1600275 1.60 2.75
15025 1.50 25.00 15058 1.50 58.00 160028 1.60 2.80
150255 1.50 25.50 15059 1.50 59.00 160031 1.60 3.10
O-Rings
O-Rings
15026 1.50 26.00 15060 1.50 60.00 160032 1.60 3.20
150265 1.50 26.50 15061 1.50 61.00 160037 1.60 3.70
15027 1.50 27.00 15062 1.50 62.00 160041 1.60 4.10
150275 1.50 27.50 15063 1.50 63.00 160047 1.60 4.70
15028 1.50 28.00 15064 1.50 64.00 160050 1.60 5.00
150285 1.50 28.50 15065 1.50 65.00 160051 1.60 5.10
15029 1.50 29.00 15066 1.50 66.00 160061 1.60 6.10
150295 1.50 29.50 15067 1.50 67.00 160068 1.60 6.80
15030 1.50 30.00 15068 1.50 68.00 160071 1.60 7.10
150305 1.50 30.50 15069 1.50 69.00 160081 1.60 8.10
15031 1.50 31.00 15070 1.50 70.00 160091 1.60 9.10
150315 1.50 31.50 15071 1.50 71.00 160101 1.60 10.10
15032 1.50 32.00 15072 1.50 72.00 160111 1.60 11.10
150325 1.50 32.50 15073 1.50 73.00 160121 1.60 12.10
15033 1.50 33.00 15074 1.50 74.00 160131 1.60 13.10
150335 1.50 33.50 15075 1.50 75.00 160141 1.60 14.10
15034 1.50 34.00 15076 1.50 76.00 160151 1.60 15.10
150345 1.50 34.50 15077 1.50 77.00 160161 1.60 16.10
15035 1.50 35.00 15078 1.50 78.00 160171 1.60 17.10
150355 1.50 35.50 15079 1.50 79.00 160181 1.60 18.10
15036 1.50 36.00 15080 1.50 80.00 160191 1.60 19.10
150365 1.50 36.50 15081 1.50 81.00 160203 1.60 20.30
15037 1.50 37.00 15082 1.50 82.00 160211 1.60 21.10
150375 1.50 37.50 15083 1.50 83.00 160221 1.60 22.10
15038 1.50 38.00 15084 1.50 84.00 160251 1.60 25.10
150385 1.50 38.50 15085 1.50 85.00 160271 1.60 27.10
15039 1.50 39.00 15086 1.50 86.00 160291 1.60 29.10
150395 1.50 39.50 15087 1.50 87.00 160321 1.60 32.10
15040 1.50 40.00 15088 1.50 88.00 160351 1.60 35.10
15041 1.50 41.00 15089 1.50 89.00 160371 1.60 37.10
15042 1.50 42.00 15090 1.50 90.00 160511 1.60 51.10
15043 1.50 43.00 15091 1.50 91.00 160860 1.60 86.00
15044 1.50 44.00 15092 1.50 92.00 160966 1.60 96.60
15045 1.50 45.00 15093 1.50 93.00 16115 1.60 115.00
15046 1.50 46.00 15094 1.50 94.00 -004 1.78 1.78 -004
15047 1.50 47.00 15095 1.50 95.00 -005 1.78 2.57 -005
15048 1.50 48.00 15096 1.50 96.00 -006 1.78 2.90 -006
15049 1.50 49.00 15097 1.50 97.00 -007 1.78 3.68 -007
15050 1.50 50.00 15098 1.50 98.00 -008 1.78 4.47 -008
15051 1.50 51.00 15099 1.50 99.00 -009 1.78 5.28 -009
15052 1.50 52.00 15100 1.50 100.00 -010 1.78 6.07 -010
15053 1.50 53.00 15105 1.50 105.00 -011 1.78 7.65 -011
15054 1.50 54.00 15145 1.50 145.00 -012 1.78 9.25 -012
15055 1.50 55.00 -003 1.52 1.42 -003 -013 1.78 10.82 -013
HITECHSEALS.COM 173

-014 1.78 12.42 -014 18005 1.80 5.00 200035 2.00 3.50
-015 1.78 14.00 -015 1800515 1.80 5.15 20004 2.00 4.00
-016 1.78 15.60 -016 180053 1.80 5.30 200045 2.00 4.50
-017 1.78 17.17 -017 180056 1.80 5.60 200046 2.00 4.60
O-Rings
-018 1.78 18.77 -018 18006 1.80 6.00 20005 2.00 5.00
O-Rings
-019 1.78 20.35 -019 180063 1.80 6.30 200055 2.00 5.50
-020 1.78 21.95 -020 180067 1.80 6.70 20006 2.00 6.00
-021 1.78 23.52 -021 180069 1.80 6.90 200065 2.00 6.50
-022 1.78 25.12 -022 180071 1.80 7.10 20007 2.00 7.00
-023 1.78 26.70 -023 180075 1.80 7.50 200075 2.00 7.50
-024 1.78 28.30 -024 18008 1.80 8.00 20008 2.00 8.00
-025 1.78 29.87 -025 180085 1.80 8.50 200085 2.00 8.50
-026 1.78 31.47 -026 1800876 1.80 8.76 20009 2.00 9.00
-027 1.78 33.05 -027 18009 1.80 9.00 200094 2.00 9.40
-028 1.78 34.65 -028 180095 1.80 9.50 20010 2.00 10.00
-029 1.78 37.82 -029 18010 1.80 10.00 200105 2.00 10.50
-030 1.78 41.00 -030 180106 1.80 10.60 20011 2.00 11.00
-031 1.78 44.17 -031 180112 1.80 11.20 200115 2.00 11.50
-032 1.78 47.35 -032 180118 1.80 11.80 20012 2.00 12.00
-033 1.78 50.52 -033 180125 1.80 12.50 200125 2.00 12.50
-034 1.78 53.70 -034 180132 1.80 13.20 20013 2.00 13.00
-035 1.78 56.87 -035 18014 1.80 14.00 200135 2.00 13.50
-036 1.78 60.05 -036 18015 1.80 15.00 20014 2.00 14.00
-037 1.78 63.22 -037 18016 1.80 16.00 200145 2.00 14.50
-038 1.78 66.40 -038 18017 1.80 17.00 20015 2.00 15.00
-039 1.78 69.57 -039 190024 1.90 2.40 200155 2.00 15.50
-040 1.78 72.75 -040 190026 1.90 2.60 20016 2.00 16.00
-041 1.78 75.92 -041 190028 1.90 2.80 P3 200165 2.00 16.50
-042 1.78 82.27 -042 190034 1.90 3.40 20017 2.00 17.00
-043 1.78 88.62 -043 190037 1.90 3.70 200175 2.00 17.50
-044 1.78 94.97 -044 190038 1.90 3.80 P4 20018 2.00 18.00
-045 1.78 101.32 -045 190042 1.90 4.20 200185 2.00 18.50
-046 1.78 107.67 -046 190048 1.90 4.80 P5 20019 2.00 19.00
-047 1.78 114.02 -047 190049 1.90 4.90 200195 2.00 19.50
-048 1.78 120.37 -048 190057 1.90 5.70 20020 2.00 20.00
-049 1.78 126.72 -049 190058 1.90 5.80 P6 200205 2.00 20.50
-050 1.78 133.07 -050 190064 1.90 6.40 20021 2.00 21.00
180018 1.80 1.80 190068 1.90 6.80 P7 200215 2.00 21.50
18002 1.80 2.00 190072 1.90 7.20 200219 2.00 21.90 S 22.4
1800224 1.80 2.24 190078 1.90 7.80 P8 20022 2.00 22.00
180025 1.80 2.50 19008 1.90 8.00 200225 2.00 22.50
180028 1.80 2.80 190088 1.90 8.80 P9 20023 2.00 23.00
1800315 1.80 3.15 190089 1.90 8.90 200235 2.00 23.50 S 24
1800355 1.80 3.55 190098 1.90 9.80 P 10 20024 2.00 24.00
1800375 1.80 3.75 20002 2.00 2.00 200245 2.00 24.50 S 25
18004 1.80 4.00 200025 2.00 2.50 20025 2.00 25.00
180045 1.80 4.50 200026 2.00 2.60 200255 2.00 25.50 S 26
1800487 1.80 4.87 20003 2.00 3.00 20026 2.00 26.00
174 HITECHSEALS.COM
200265 2.00 26.50 200545 2.00 54.50 S 55 20091 2.00 91.00
20027 2.00 27.00 20055 2.00 55.00 20092 2.00 92.00
200275 2.00 27.50 S 28 200555 2.00 55.50 S 56 20093 2.00 93.00
20028 2.00 28.00 20056 2.00 56.00 20094 2.00 94.00
O-Rings
200285 2.00 28.50 S 29 20057 2.00 57.00 200945 2.00 94.50 S 95
O-Rings
20029 2.00 29.00 20058 2.00 58.00 20095 2.00 95.00
200295 2.00 29.50 S 30 20059 2.00 59.00 20096 2.00 96.00
20030 2.00 30.00 200595 2.00 59.50 S 60 20097 2.00 97.00
200305 2.00 30.50 20060 2.00 60.00 20098 2.00 98.00
20031 2.00 31.00 S 31.5 20061 2.00 61.00 20099 2.00 99.00
200315 2.00 31.50 S 32 20062 2.00 62.00 200995 2.00 99.50 S 100
20032 2.00 32.00 200625 2.00 62.50 S 63 20100 2.00 100.00
200325 2.00 32.50 20063 2.00 63.00 20102 2.00 102.00
20033 2.00 33.00 20064 2.00 64.00 201045 2.00 104.50 S 105
200335 2.00 33.50 S 34 200645 2.00 64.50 S 65 20105 2.00 105.00
20034 2.00 34.00 20065 2.00 65.00 20109 2.00 109.00
200345 2.00 34.50 S 35 20066 2.00 66.00 201095 2.00 109.50 S 110
20035 2.00 35.00 S 35.5 200665 2.00 66.50 S 67 20110 2.00 110.00
200355 2.00 35.50 S 36 20067 2.00 67.00 201115 2.00 111.50 S 112
20036 2.00 36.00 20068 2.00 68.00 201145 2.00 114.50 S 115
200365 2.00 36.50 20069 2.00 69.00 20115 2.00 115.00
20037 2.00 37.00 200695 2.00 69.50 S 70 201195 2.00 119.50 S 120
200375 2.00 37.50 S 38 20070 2.00 70.00 20120 2.00 120.00
20038 2.00 38.00 200705 2.00 70.50 S 71 201245 2.00 124.50 S 125
20039 2.00 39.00 20071 2.00 71.00 201256 2.00 125.60
200395 2.00 39.50 S 40 20072 2.00 72.00 201295 2.00 129.50 S 130
20040 2.00 40.00 20073 2.00 73.00 20130 2.00 130.00
20041 2.00 41.00 20074 2.00 74.00 201315 2.00 131.50 S 132
200415 2.00 41.50 S 42 200745 2.00 74.50 S 75 201345 2.00 134.50 S 135
20042 2.00 42.00 20075 2.00 75.00 201395 2.00 139.50 S 140
20043 2.00 43.00 20076 2.00 76.00 20140 2.00 140.00
200435 2.00 43.50 S 44 20077 2.00 77.00 201445 2.00 144.50 S 145
20044 2.00 44.00 20078 2.00 78.00 201495 2.00 149.50 S 150
200445 2.00 44.50 S 45 20079 2.00 79.00 20165 2.00 165.00
20045 2.00 45.00 200795 2.00 79.50 S 80 20180 2.00 180.00
200455 2.00 45.50 S 46 20080 2.00 80.00 20194 2.00 194.00
20046 2.00 46.00 20081 2.00 81.00 240033 2.40 3.30
20047 2.00 47.00 20082 2.00 82.00 240036 2.40 3.60
200475 2.00 47.50 S 48 20083 2.00 83.00 240043 2.40 4.30
20048 2.00 48.00 20084 2.00 84.00 240046 2.40 4.60
20049 2.00 49.00 200845 2.00 84.50 S 85 240053 2.40 5.30
200495 2.00 49.50 S 50 20085 2.00 85.00 240055 2.40 5.50
20050 2.00 50.00 20086 2.00 86.00 240056 2.40 5.60
20051 2.00 51.00 20087 2.00 87.00 240063 2.40 6.30
20052 2.00 52.00 20088 2.00 88.00 240066 2.40 6.60
200525 2.00 52.50 S 53 20089 2.00 89.00 240073 2.40 7.30
20053 2.00 53.00 200895 2.00 89.50 S 90 240075 2.40 7.50
20054 2.00 54.00 20090 2.00 90.00 240076 2.40 7.60
HITECHSEALS.COM 175

24008 2.40 8.00 240223 2.40 22.30 25011 2.50 11.00
240083 2.40 8.30 240226 2.40 22.60 250115 2.50 11.50
240086 2.40 8.60 240233 2.40 23.30 25012 2.50 12.00
240093 2.40 9.30 240235 2.40 23.50 250125 2.50 12.50
O-Rings
240096 2.40 9.60 240236 2.40 23.60 25013 2.50 13.00

O-Rings
240098 2.40 9.80 P 10A 240243 2.40 24.30 250135 2.50 13.50
240103 2.40 10.30 240245 2.40 24.50 25014 2.50 14.00
240105 2.40 10.50 240246 2.40 24.60 250145 2.50 14.50
240106 2.40 10.60 24025 2.40 25.00 25015 2.50 15.00
240108 2.40 10.80 P 11 240253 2.40 25.30 250155 2.50 15.50
24011 2.40 11.00 P 11.2 240256 2.40 25.60 25016 2.50 16.00
240113 2.40 11.30 240273 2.40 27.30 250165 2.50 16.50
240115 2.40 11.50 240275 2.40 27.50 25017 2.50 17.00
240116 2.40 11.60 240276 2.40 27.60 250175 2.50 17.50
240118 2.40 11.80 P 12 240296 2.40 29.60 25018 2.50 18.00
240123 2.40 12.30 P 12.5 240303 2.40 30.30 250185 2.50 18.50
240126 2.40 12.60 240316 2.40 31.60 25019 2.50 19.00
240133 2.40 13.30 240333 2.40 33.30 250195 2.50 19.50
240135 2.40 13.50 240346 2.40 34.60 25020 2.50 20.00
240136 2.40 13.60 240365 2.40 36.50 250205 2.50 20.50
240138 2.40 13.80 P 14 240376 2.40 37.60 25021 2.50 21.00
240143 2.40 14.30 240396 2.40 39.60 250215 2.50 21.50
240145 2.40 14.50 240416 2.40 41.60 25022 2.50 22.00
240146 2.40 14.60 240446 2.40 44.60 250225 2.50 22.50
240148 2.40 14.80 P 15 240476 2.40 47.60 25023 2.50 23.00
240153 2.40 15.30 240496 2.40 49.60 250235 2.50 23.50
240155 2.40 15.50 240516 2.40 51.60 25024 2.50 24.00
240156 2.40 15.60 240546 2.40 54.60 250245 2.50 24.50
240158 2.40 15.80 P 16 240576 2.40 57.60 25025 2.50 25.00
240159 2.40 15.90 240596 2.40 59.60 250255 2.50 25.50
240163 2.40 16.30 240616 2.40 61.60 25026 2.50 26.00
240166 2.40 16.60 240646 2.40 64.60 250265 2.50 26.50
240173 2.40 17.30 240676 2.40 67.60 25027 2.50 27.00
240175 2.40 17.50 240696 2.40 69.60 250275 2.50 27.50
240176 2.40 17.60 25004 2.50 4.00 25028 2.50 28.00
240178 2.40 17.80 P 18 250046 2.50 4.60 250285 2.50 28.50
240183 2.40 18.30 25005 2.50 5.00 25029 2.50 29.00
240186 2.40 18.60 250055 2.50 5.50 250295 2.50 29.50
240193 2.40 19.30 25006 2.50 6.00 25030 2.50 30.00
240196 2.40 19.60 250065 2.50 6.50 250305 2.50 30.50
240198 2.40 19.80 P 20 25007 2.50 7.00 25031 2.50 31.00
240203 2.40 20.30 250075 2.50 7.50 250315 2.50 31.50
240205 2.40 20.50 25008 2.50 8.00 25032 2.50 32.00
240208 2.40 20.80 P 21 250085 2.50 8.50 250325 2.50 32.50
240213 2.40 21.30 25009 2.50 9.00 25033 2.50 33.00
240215 2.40 21.50 250095 2.50 9.50 250335 2.50 33.50
240216 2.40 21.60 25010 2.50 10.00 25034 2.50 34.00
240218 2.40 21.80 P 22 250105 2.50 10.50 250345 2.50 34.50
176 HITECHSEALS.COM
25035 2.50 35.00 25078 2.50 78.00 25126 2.50 126.00
250355 2.50 35.50 25079 2.50 79.00 25127 2.50 127.00
25036 2.50 36.00 25080 2.50 80.00 25128 2.50 128.00
250365 2.50 36.50 25081 2.50 81.00 25129 2.50 129.00
O-Rings
25037 2.50 37.00 25082 2.50 82.00 25130 2.50 130.00
O-Rings
250375 2.50 37.50 25083 2.50 83.00 25131 2.50 131.00
25038 2.50 38.00 25084 2.50 84.00 25132 2.50 132.00
250385 2.50 38.50 25085 2.50 85.00 25133 2.50 133.00
25039 2.50 39.00 25086 2.50 86.00 25134 2.50 134.00
250395 2.50 39.50 25087 2.50 87.00 25135 2.50 135.00
25040 2.50 40.00 25088 2.50 88.00 25136 2.50 136.00
25041 2.50 41.00 25089 2.50 89.00 25137 2.50 137.00
25042 2.50 42.00 25090 2.50 90.00 25138 2.50 138.00
25043 2.50 43.00 25091 2.50 91.00 25139 2.50 139.00
25044 2.50 44.00 25092 2.50 92.00 25140 2.50 140.00
25045 2.50 45.00 25093 2.50 93.00 25141 2.50 141.00
25046 2.50 46.00 25094 2.50 94.00 25142 2.50 142.00
25047 2.50 47.00 25095 2.50 95.00 25143 2.50 143.00
25048 2.50 48.00 25096 2.50 96.00 25144 2.50 144.00
25049 2.50 49.00 25097 2.50 97.00 25145 2.50 145.00
25050 2.50 50.00 25098 2.50 98.00 25146 2.50 146.00
25051 2.50 51.00 25099 2.50 99.00 25147 2.50 147.00
25052 2.50 52.00 25100 2.50 100.00 25148 2.50 148.00
25053 2.50 53.00 25101 2.50 101.00 25149 2.50 149.00
25054 2.50 54.00 25102 2.50 102.00 25150 2.50 150.00
25055 2.50 55.00 25103 2.50 103.00 -102 2.62 1.24 -102
25056 2.50 56.00 25104 2.50 104.00 -103 2.62 2.06 -103
25057 2.50 57.00 25105 2.50 105.00 -104 2.62 2.84 -104
25058 2.50 58.00 25106 2.50 106.00 -105 2.62 3.63 -105
25059 2.50 59.00 25107 2.50 107.00 -106 2.62 4.42 -106
25060 2.50 60.00 25108 2.50 108.00 -107 2.62 5.23 -107
25061 2.50 61.00 25109 2.50 109.00 -108 2.62 6.02 -108
25062 2.50 62.00 25110 2.50 110.00 -109 2.62 7.59 -109
25063 2.50 63.00 25111 2.50 111.00 -110 2.62 9.19 -110
25064 2.50 64.00 25112 2.50 112.00 -111 2.62 10.77 -111
25065 2.50 65.00 25113 2.50 113.00 -112 2.62 12.37 -112
25066 2.50 66.00 25114 2.50 114.00 -113 2.62 13.94 -113
25067 2.50 67.00 25115 2.50 115.00 -114 2.62 15.54 -114
25068 2.50 68.00 25116 2.50 116.00 -115 2.62 17.12 -115
25069 2.50 69.00 25117 2.50 117.00 -116 2.62 18.72 -116
25070 2.50 70.00 25118 2.50 118.00 -117 2.62 20.30 -117
25071 2.50 71.00 25119 2.50 119.00 -118 2.62 21.89 -118
25072 2.50 72.00 25120 2.50 120.00 -119 2.62 23.47 -119
25073 2.50 73.00 25121 2.50 121.00 -120 2.62 25.07 -120
25074 2.50 74.00 25122 2.50 122.00 -121 2.62 26.64 -121
25075 2.50 75.00 25123 2.50 123.00 -122 2.62 28.24 -122
25076 2.50 76.00 25124 2.50 124.00 -123 2.62 29.82 -123
25077 2.50 77.00 25125 2.50 125.00 -124 2.62 31.42 -124
HITECHSEALS.COM 177

-125 2.62 32.99 -125 -174 2.62 221.92 -174 300135 3.00 13.50
-126 2.62 34.59 -126 -175 2.62 228.27 -175 30014 3.00 14.00
-127 2.62 36.17 -127 -176 2.62 234.62 -176 300145 3.00 14.50
-128 2.62 37.77 -128 -177 2.62 240.97 -177 30015 3.00 15.00
O-Rings
-129 2.62 39.34 -129 -178 2.62 247.32 -178 300155 3.00 15.50
O-Rings
-130 2.62 40.94 -130 265014 2.65 14.00 30016 3.00 16.00
-131 2.62 42.52 -131 265015 2.65 15.00 300165 3.00 16.50
-132 2.62 44.12 -132 265016 2.65 16.00 30017 3.00 17.00
-133 2.62 45.69 -133 265017 2.65 17.00 300175 3.00 17.50
-134 2.62 47.29 -134 265018 2.65 18.00 30018 3.00 18.00
-135 2.62 48.90 -135 265019 2.65 19.00 300182 3.00 18.20
-136 2.62 50.47 -136 265020 2.65 20.00 300185 3.00 18.50
-137 2.62 52.07 -137 2650212 2.65 21.20 30019 3.00 19.00
-138 2.62 53.64 -138 2650224 2.65 22.40 300192 3.00 19.20
-139 2.62 55.25 -139 2650236 2.65 23.60 300195 3.00 19.50
-140 2.62 56.82 -140 265025 2.65 25.00 30020 3.00 20.00
-141 2.62 58.42 -141 2650258 2.65 25.80 300205 3.00 20.50
-142 2.62 59.99 -142 2650265 2.65 26.50 30021 3.00 21.00
-143 2.62 61.60 -143 265028 2.65 28.00 300215 3.00 21.50
-144 2.62 63.17 -144 265030 2.65 30.00 30022 3.00 22.00
-145 2.62 64.77 -145 2650315 2.65 31.50 300222 3.00 22.20
-146 2.62 66.34 -146 265032 2.65 32.00 300225 3.00 22.50
-147 2.62 67.95 -147 2650325 2.65 32.50 30023 3.00 23.00
-148 2.62 69.52 -148 2650335 2.65 33.50 300235 3.00 23.50
-149 2.62 71.12 -149 2650345 2.65 34.50 30024 3.00 24.00
-150 2.62 72.69 -150 2650355 2.65 35.50 300242 3.00 24.20
-151 2.62 75.87 -151 2650365 2.65 36.50 300245 3.00 24.50
-152 2.62 82.22 -152 2650375 2.65 37.50 300246 3.00 24.60
-153 2.62 88.57 -153 2650387 2.65 38.70 30025 3.00 25.00
-154 2.62 94.92 -154 300035 3.00 3.50 300252 3.00 25.20
-155 2.62 101.27 -155 30004 3.00 4.00 300255 3.00 25.50
-156 2.62 107.62 -156 300045 3.00 4.50 30026 3.00 26.00
-157 2.62 113.97 -157 30005 3.00 5.00 300262 3.00 26.20
-158 2.62 120.32 -158 300055 3.00 5.50 300265 3.00 26.50
-159 2.62 126.67 -159 30006 3.00 6.00 30027 3.00 27.00
-160 2.62 133.02 -160 300065 3.00 6.50 300275 3.00 27.50
-161 2.62 139.37 -161 30007 3.00 7.00 30028 3.00 28.00
-162 2.62 145.72 -162 300075 3.00 7.50 300285 3.00 28.50
-163 2.62 152.07 -163 30008 3.00 8.00 30029 3.00 29.00
-164 2.62 158.42 -164 300085 3.00 8.50 300292 3.00 29.20
-165 2.62 164.77 -165 30009 3.00 9.00 300295 3.00 29.50
-166 2.62 171.12 -166 300095 3.00 9.50 30030 3.00 30.00
-167 2.62 177.47 -167 30010 3.00 10.00 300302 3.00 30.20
-168 2.62 183.82 -168 300105 3.00 10.50 300305 3.00 30.50
-169 2.62 190.17 -169 30011 3.00 11.00 30031 3.00 31.00
-170 2.62 196.52 -170 300115 3.00 11.50 300315 3.00 31.50
-171 2.62 202.87 -171 30012 3.00 12.00 30032 3.00 32.00
-172 2.62 209.22 -172 300125 3.00 12.50 300322 3.00 32.20
-173 2.62 215.57 -173 30013 3.00 13.00 300325 3.00 32.50
178 HITECHSEALS.COM
30033 3.00 33.00 300595 3.00 59.50 30102 3.00 102.00
300335 3.00 33.50 30060 3.00 60.00 30103 3.00 103.00
30034 3.00 34.00 30061 3.00 61.00 30104 3.00 104.00
300342 3.00 34.20 30062 3.00 62.00 301045 3.00 104.50
O-Rings
300345 3.00 34.50 300622 3.00 62.20 30105 3.00 105.00
O-Rings
30035 3.00 35.00 30063 3.00 63.00 30106 3.00 106.00
300355 3.00 35.50 30064 3.00 64.00 30107 3.00 107.00
30036 3.00 36.00 300645 3.00 64.50 30108 3.00 108.00
300362 3.00 36.20 30065 3.00 65.00 30109 3.00 109.00
300365 3.00 36.50 30066 3.00 66.00 301095 3.00 109.50
30037 3.00 37.00 30067 3.00 67.00 30110 3.00 110.00
300372 3.00 37.20 30068 3.00 68.00 30111 3.00 111.00
300375 3.00 37.50 30069 3.00 69.00 30112 3.00 112.00
30038 3.00 38.00 30070 3.00 70.00 30113 3.00 113.00
300385 3.00 38.50 30071 3.00 71.00 30114 3.00 114.00
30039 3.00 39.00 30072 3.00 72.00 301145 3.00 114.50
300392 3.00 39.20 30073 3.00 73.00 30115 3.00 115.00
300395 3.00 39.50 30074 3.00 74.00 30116 3.00 116.00
30040 3.00 40.00 30075 3.00 75.00 30117 3.00 117.00
300402 3.00 40.20 30076 3.00 76.00 30118 3.00 118.00
30041 3.00 41.00 30077 3.00 77.00 30119 3.00 119.00
300415 3.00 41.50 30078 3.00 78.00 301195 3.00 119.50
30042 3.00 42.00 30079 3.00 79.00 30120 3.00 120.00
300422 3.00 42.20 30080 3.00 80.00 30121 3.00 121.00
300425 3.00 42.50 30081 3.00 81.00 30122 3.00 122.00
30043 3.00 43.00 30082 3.00 82.00 30123 3.00 123.00
30044 3.00 44.00 30083 3.00 83.00 30124 3.00 124.00
300442 3.00 44.20 30084 3.00 84.00 301245 3.00 124.50
300445 3.00 44.50 300845 3.00 84.50 30125 3.00 125.00
30045 3.00 45.00 30085 3.00 85.00 30126 3.00 126.00
30046 3.00 46.00 30086 3.00 86.00 301265 3.00 126.50
30047 3.00 47.00 30087 3.00 87.00 30127 3.00 127.00
30048 3.00 48.00 30088 3.00 88.00 30128 3.00 128.00
30049 3.00 49.00 30089 3.00 89.00 30129 3.00 129.00
300495 3.00 49.50 300895 3.00 89.50 301295 3.00 129.50
30050 3.00 50.00 30090 3.00 90.00 30130 3.00 130.00
300505 3.00 50.50 30091 3.00 91.00 30131 3.00 131.00
30051 3.00 51.00 30092 3.00 92.00 30132 3.00 132.00
30052 3.00 52.00 30093 3.00 93.00 30133 3.00 133.00
30053 3.00 53.00 30094 3.00 94.00 30134 3.00 134.00
30054 3.00 54.00 300945 3.00 94.50 301345 3.00 134.50
300542 3.00 54.20 30095 3.00 95.00 30135 3.00 135.00
300545 3.00 54.50 30096 3.00 96.00 30136 3.00 136.00
30055 3.00 55.00 30097 3.00 97.00 30137 3.00 137.00
30056 3.00 56.00 30098 3.00 98.00 30138 3.00 138.00
300562 3.00 56.20 30099 3.00 99.00 30139 3.00 139.00
30057 3.00 57.00 300995 3.00 99.50 301395 3.00 139.50
30058 3.00 58.00 30100 3.00 100.00 30140 3.00 140.00
30059 3.00 59.00 30101 3.00 101.00 30141 3.00 141.00
HITECHSEALS.COM 179

30142 3.00 142.00 30181 3.00 181.00 311344 3.10 134.40 G 135
30143 3.00 143.00 30182 3.00 182.00 311394 3.10 139.40 G 140
30144 3.00 144.00 30183 3.00 183.00 311444 3.10 144.40 G 145
301445 3.00 144.50 301835 3.00 183.50 35005 3.50 5.00
O-Rings
O-Rings
30145 3.00 145.00 30184 3.00 184.00 35008 3.50 8.00

30146 3.00 146.00 301845 3.00 184.50 35009 3.50 9.00
30147 3.00 147.00 30185 3.00 185.00 350092 3.50 9.20
30148 3.00 148.00 30186 3.00 186.00 35010 3.50 10.00
30149 3.00 149.00 30187 3.00 187.00 35011 3.50 11.00
301495 3.00 149.50 30188 3.00 188.00 35012 3.50 12.00
30150 3.00 150.00 30189 3.00 189.00 35013 3.50 13.00
30151 3.00 151.00 301895 3.00 189.50 35014 3.50 14.00
30152 3.00 152.00 30190 3.00 190.00 35015 3.50 15.00
30153 3.00 153.00 30191 3.00 191.00 35016 3.50 16.00
30154 3.00 154.00 30192 3.00 192.00 35017 3.50 17.00
301545 3.00 154.50 30193 3.00 193.00 350175 3.50 17.50
30155 3.00 155.00 30194 3.00 194.00 35018 3.50 18.00
30156 3.00 156.00 301945 3.00 194.50 35019 3.50 19.00
30157 3.00 157.00 30195 3.00 195.00 35020 3.50 20.00
30158 3.00 158.00 30196 3.00 196.00 35021 3.50 21.00
30159 3.00 159.00 30197 3.00 197.00 350217 3.50 21.70 P 22A
301595 3.00 159.50 30198 3.00 198.00 35022 3.50 22.00
30160 3.00 160.00 30199 3.00 199.00 350221 3.50 22.10 P 22.4
30161 3.00 161.00 301995 3.00 199.50 35023 3.50 23.00
30162 3.00 162.00 30200 3.00 200.00 350237 3.50 23.70 P 24
30163 3.00 163.00 310244 3.10 24.40 G 25 35024 3.50 24.00
30164 3.00 164.00 310294 3.10 29.40 G 30 350247 3.50 24.70 P 25
301645 3.00 164.50 310344 3.10 34.40 G 35 35025 3.50 25.00
30165 3.00 165.00 310394 3.10 39.40 G 40 350252 3.50 25.20 P 25.5
30166 3.00 166.00 310444 3.10 44.40 G 45 350257 3.50 25.70 P 26
30167 3.00 167.00 310494 3.10 49.40 G 50 35026 3.50 26.00
30168 3.00 168.00 310544 3.10 54.40 G 55 35027 3.50 27.00
30169 3.00 169.00 310594 3.10 59.40 G 60 350277 3.50 27.70 P 28
301695 3.00 169.50 310644 3.10 64.40 G 65 35028 3.50 28.00
30170 3.00 170.00 310694 3.10 69.40 G 70 350287 3.50 28.70 P 29
30171 3.00 171.00 310744 3.10 74.40 G 75 35029 3.50 29.00
30172 3.00 172.00 310794 3.10 79.40 G 80 350292 3.50 29.20 P 29.5
30173 3.00 173.00 310844 3.10 84.40 G 85 350297 3.50 29.70 P 30
30174 3.00 174.00 310894 3.10 89.40 G 90 35030 3.50 30.00
301745 3.00 174.50 310944 3.10 94.40 G 95 350305 3.50 30.50
30175 3.00 175.00 310994 3.10 99.40 G 100 350307 3.50 30.70 P 31
30176 3.00 176.00 311044 3.10 104.40 G 105 35031 3.50 31.00
30177 3.00 177.00 311094 3.10 109.40 G 110 350312 3.50 31.20 P 31.5
30178 3.00 178.00 311144 3.10 114.40 G 115 350317 3.50 31.70 P 32
30179 3.00 179.00 311194 3.10 119.40 G 120 35032 3.50 32.00
301795 3.00 179.50 311244 3.10 124.40 G 125 35033 3.50 33.00
30180 3.00 180.00 311294 3.10 129.40 G 130 350337 3.50 33.70 P 34
180 HITECHSEALS.COM
35034 3.50 34.00 35067 3.50 67.00 35114 3.50 114.00
350347 3.50 34.70 P 35 35068 3.50 68.00 35115 3.50 115.00
35035 3.50 35.00 35069 3.50 69.00 35116 3.50 116.00
350352 3.50 35.20 P 35.5 35070 3.50 70.00 35117 3.50 117.00
O-Rings
O-Rings
350357 3.50 35.70 P 36 35071 3.50 71.00 35118 3.50 118.00
35036 3.50 36.00 35072 3.50 72.00 35119 3.50 119.00
35037 3.50 37.00 35073 3.50 73.00 35120 3.50 120.00
350377 3.50 37.70 P 38 35074 3.50 74.00 35121 3.50 121.00
35038 3.50 38.00 35075 3.50 75.00 35122 3.50 122.00
350387 3.50 38.70 P 39 35076 3.50 76.00 35123 3.50 123.00
35039 3.50 39.00 35077 3.50 77.00 35124 3.50 124.00
350397 3.50 39.70 P 40 35078 3.50 78.00 35125 3.50 125.00
35040 3.50 40.00 35079 3.50 79.00 35126 3.50 126.00
350407 3.50 40.70 P 41 35080 3.50 80.00 35127 3.50 127.00
35041 3.50 41.00 35081 3.50 81.00 35128 3.50 128.00
350417 3.50 41.70 P 42 35082 3.50 82.00 35129 3.50 129.00
35042 3.50 42.00 35083 3.50 83.00 35130 3.50 130.00
35043 3.50 43.00 35084 3.50 84.00 35131 3.50 131.00
350437 3.50 43.70 P 44 35085 3.50 85.00 35132 3.50 132.00
35044 3.50 44.00 35086 3.50 86.00 35133 3.50 133.00
350447 3.50 44.70 P 45 35087 3.50 87.00 35134 3.50 134.00
35045 3.50 45.00 35088 3.50 88.00 35135 3.50 135.00
350457 3.50 45.70 P 46 35089 3.50 89.00 35136 3.50 136.00
35046 3.50 46.00 35090 3.50 90.00 35137 3.50 137.00
35047 3.50 47.00 35091 3.50 91.00 35138 3.50 138.00
350477 3.50 47.70 P 48 35092 3.50 92.00 35139 3.50 139.00
35048 3.50 48.00 35093 3.50 93.00 35140 3.50 140.00
350487 3.50 48.70 P 49 35094 3.50 94.00 35141 3.50 141.00
35049 3.50 49.00 35095 3.50 95.00 35142 3.50 142.00
350497 3.50 49.70 P 50 35096 3.50 96.00 35143 3.50 143.00
35050 3.50 50.00 35097 3.50 97.00 35144 3.50 144.00
35051 3.50 51.00 35098 3.50 98.00 35145 3.50 145.00
35052 3.50 52.00 35099 3.50 99.00 35146 3.50 146.00
35053 3.50 53.00 35100 3.50 100.00 35147 3.50 147.00
35054 3.50 54.00 35101 3.50 101.00 35148 3.50 148.00
35055 3.50 55.00 35102 3.50 102.00 35149 3.50 149.00
35056 3.50 56.00 35103 3.50 103.00 35150 3.50 150.00
35057 3.50 57.00 35104 3.50 104.00 35151 3.50 151.00
35058 3.50 58.00 35105 3.50 105.00 35152 3.50 152.00
35059 3.50 59.00 35106 3.50 106.00 35153 3.50 153.00
35060 3.50 60.00 35107 3.50 107.00 35154 3.50 154.00
35061 3.50 61.00 35108 3.50 108.00 35155 3.50 155.00
35062 3.50 62.00 35109 3.50 109.00 35156 3.50 156.00
35063 3.50 63.00 35110 3.50 110.00 35157 3.50 157.00
35064 3.50 64.00 35111 3.50 111.00 35158 3.50 158.00
35065 3.50 65.00 35112 3.50 112.00 35159 3.50 159.00
35066 3.50 66.00 35113 3.50 113.00 35160 3.50 160.00
HITECHSEALS.COM 181

35161 3.50 161.00 -207 3.53 13.87 -207 -253 3.53 136.12 -253
35162 3.50 162.00 -208 3.53 15.47 -208 -254 3.53 139.29 -254
35163 3.50 163.00 -209 3.53 17.04 -209 -255 3.53 142.47 -255
35164 3.50 164.00 -210 3.53 18.64 -210 -256 3.53 145.64 -256
O-Rings
O-Rings
35165 3.50 165.00 -211 3.53 20.22 -211 -257 3.53 148.82 -257
35166 3.50 166.00 -212 3.53 21.82 -212 -258 3.53 151.99 -258
35167 3.50 167.00 -213 3.53 23.39 -213 -259 3.53 158.34 -259
35168 3.50 168.00 -214 3.53 24.99 -214 -260 3.53 164.69 -260
35169 3.50 169.00 -215 3.53 26.57 -215 -261 3.53 171.04 -261
35170 3.50 170.00 -216 3.53 28.17 -216 -262 3.53 177.39 -262
35171 3.50 171.00 -217 3.53 29.74 -217 -263 3.53 183.74 -263
35172 3.50 172.00 -218 3.53 31.34 -218 -264 3.53 190.09 -264
35173 3.50 173.00 -219 3.53 32.92 -219 -265 3.53 196.44 -265
35174 3.50 174.00 -220 3.53 34.52 -220 -266 3.53 202.79 -266
35175 3.50 175.00 -221 3.53 36.09 -221 -267 3.53 209.14 -267
35176 3.50 176.00 -222 3.53 37.69 -222 -268 3.53 215.49 -268
35177 3.50 177.00 -223 3.53 40.87 -223 -269 3.53 221.84 -269
35178 3.50 178.00 -224 3.53 44.04 -224 -270 3.53 228.19 -270
35179 3.50 179.00 -225 3.53 47.22 -225 -271 3.53 234.54 -271
35180 3.50 180.00 -226 3.53 50.39 -226 -272 3.53 240.89 -272
35181 3.50 181.00 -227 3.53 53.57 -227 -273 3.53 247.24 -273
35182 3.50 182.00 -228 3.53 56.74 -228 -274 3.53 253.59 -274
35183 3.50 183.00 -229 3.53 59.92 -229 -275 3.53 266.29 -275
35184 3.50 184.00 -230 3.53 63.09 -230 -276 3.53 278.99 -276
35185 3.50 185.00 -231 3.53 66.27 -231 -277 3.53 291.69 -277
35186 3.50 186.00 -232 3.53 69.44 -232 -278 3.53 304.39 -278
35187 3.50 187.00 -233 3.53 72.62 -233 -279 3.53 329.79 -279
35188 3.50 188.00 -234 3.53 75.79 -234 -280 3.53 355.19 -280
35189 3.50 189.00 -235 3.53 78.97 -235 -281 3.53 380.59 -281
35190 3.50 190.00 -236 3.53 82.14 -236 -282 3.53 405.26 -282
35191 3.50 191.00 -237 3.53 85.32 -237 -283 3.53 430.68 -283
35192 3.50 192.00 -238 3.53 88.49 -238 -284 3.53 456.06 -284
35193 3.50 193.00 -239 3.53 91.67 -239 360183 3.60 18.30
35194 3.50 194.00 -240 3.53 94.84 -240 360198 3.60 19.80
35195 3.50 195.00 -241 3.53 98.02 -241 360213 3.60 21.30
35196 3.50 196.00 -242 3.53 101.19 -242 36023 3.60 23.00
35197 3.50 197.00 -243 3.53 104.37 -243 360246 3.60 24.60
35198 3.50 198.00 -244 3.53 107.54 -244 360262 3.60 26.20
35199 3.50 199.00 -245 3.53 110.72 -245 360278 3.60 27.80
35200 3.50 200.00 -246 3.53 113.89 -246 360293 3.60 29.30
-201 3.53 4.34 -201 -247 3.53 117.07 -247 360308 3.60 30.80
-202 3.53 5.94 -202 -248 3.53 120.24 -248 360325 3.60 32.50
-203 3.53 7.52 -203 -249 3.53 123.42 -249 360341 3.60 34.10
-204 3.53 9.12 -204 -250 3.53 126.59 -250 360356 3.60 35.60
-205 3.53 10.69 -205 -251 3.53 129.77 -251 360373 3.60 37.30
-206 3.53 12.29 -206 -252 3.53 132.94 -252 360434 3.60 43.40
182 HITECHSEALS.COM
40004 4.00 4.00 40046 4.00 46.00 40092 4.00 92.00
40005 4.00 5.00 40047 4.00 47.00 40093 4.00 93.00
40006 4.00 6.00 40048 4.00 48.00 40094 4.00 94.00
40007 4.00 7.00 40049 4.00 49.00 40109 4.00 109.00
O-Rings
40008 4.00 8.00 40050 4.00 50.00 40110 4.00 110.00
O-Rings
40009 4.00 9.00 40051 4.00 51.00 40111 4.00 111.00
40010 4.00 10.00 40052 4.00 52.00 40112 4.00 112.00
40011 4.00 11.00 40053 4.00 53.00 40113 4.00 113.00
40012 4.00 12.00 40054 4.00 54.00 40114 4.00 114.00
40013 4.00 13.00 400545 4.00 54.50 V 55 40115 4.00 115.00
40014 4.00 14.00 40055 4.00 55.00 40116 4.00 116.00
400145 4.00 14.50 V 15 40056 4.00 56.00 40117 4.00 117.00
40015 4.00 15.00 40057 4.00 57.00 40118 4.00 118.00
40016 4.00 16.00 40058 4.00 58.00 40119 4.00 119.00 V 120
40017 4.00 17.00 40059 4.00 59.00 40120 4.00 120.00
40018 4.00 18.00 40060 4.00 60.00 40121 4.00 121.00
40019 4.00 19.00 40061 4.00 61.00 40122 4.00 122.00
40020 4.00 20.00 40062 4.00 62.00 40123 4.00 123.00
40021 4.00 21.00 40063 4.00 63.00 40124 4.00 124.00
40022 4.00 22.00 40064 4.00 64.00 40125 4.00 125.00
40023 4.00 23.00 40065 4.00 65.00 40126 4.00 126.00
400235 4.00 23.50 V 24 40066 4.00 66.00 40127 4.00 127.00
40024 4.00 24.00 40067 4.00 67.00 40128 4.00 128.00
40025 4.00 25.00 40068 4.00 68.00 40129 4.00 129.00
40026 4.00 26.00 40069 4.00 69.00 V 70 40130 4.00 130.00
40027 4.00 27.00 40070 4.00 70.00 40131 4.00 131.00
40028 4.00 28.00 40071 4.00 71.00 40132 4.00 132.00
40029 4.00 29.00 40072 4.00 72.00 40133 4.00 133.00
40030 4.00 30.00 40073 4.00 73.00 40134 4.00 134.00
40031 4.00 31.00 40074 4.00 74.00 40135 4.00 135.00
40032 4.00 32.00 40075 4.00 75.00 40136 4.00 136.00
40033 4.00 33.00 40076 4.00 76.00 40137 4.00 137.00
400335 4.00 33.50 V 34 40077 4.00 77.00 40138 4.00 138.00
40034 4.00 34.00 40078 4.00 78.00 40139 4.00 139.00
40035 4.00 35.00 40079 4.00 79.00 40140 4.00 140.00
400355 4.00 35.50 V 36 40080 4.00 80.00 40141 4.00 141.00
40036 4.00 36.00 40081 4.00 81.00 40142 4.00 142.00
40037 4.00 37.00 40082 4.00 82.00 40143 4.00 143.00
40038 4.00 38.00 40083 4.00 83.00 40144 4.00 144.00
40039 4.00 39.00 40084 4.00 84.00 V 85 40145 4.00 145.00
400395 4.00 39.50 V 40 40085 4.00 85.00 40146 4.00 146.00
40040 4.00 40.00 40086 4.00 86.00 40147 4.00 147.00
40041 4.00 41.00 40087 4.00 87.00 40148 4.00 148.00
40042 4.00 42.00 40088 4.00 88.00 401485 4.00 148.50 V 150
40043 4.00 43.00 40089 4.00 89.00 40149 4.00 149.00
40044 4.00 44.00 40090 4.00 90.00 40150 4.00 150.00
40045 4.00 45.00 40091 4.00 91.00 40151 4.00 151.00
HITECHSEALS.COM 183

40152 4.00 152.00 40198 4.00 198.00 45042 4.50 42.00
40153 4.00 153.00 40199 4.00 199.00 45043 4.50 43.00
40154 4.00 154.00 40200 4.00 200.00 45044 4.50 44.00
40155 4.00 155.00 40201 4.00 201.00 45045 4.50 45.00
O-Rings
40156 4.00 156.00 40202 4.00 202.00 45046 4.50 46.00

O-Rings
40157 4.00 157.00 40203 4.00 203.00 45047 4.50 47.00

40158 4.00 158.00 40204 4.00 204.00 45048 4.50 48.00
40159 4.00 159.00 40205 4.00 205.00 45049 4.50 49.00
40160 4.00 160.00 40206 4.00 206.00 45050 4.50 50.00
40161 4.00 161.00 40207 4.00 207.00 45051 4.50 51.00
40162 4.00 162.00 40208 4.00 208.00 45053 4.50 53.00
40163 4.00 163.00 40209 4.00 209.00 45056 4.50 56.00
40164 4.00 164.00 40210 4.00 210.00 45057 4.50 57.00
40165 4.00 165.00 45006 4.50 6.00 45060 4.50 60.00
40166 4.00 166.00 45008 4.50 8.00 45061 4.50 61.00
40167 4.00 167.00 45009 4.50 9.00 45062 4.50 62.00
40168 4.00 168.00 45010 4.50 10.00 45063 4.50 63.00
40169 4.00 169.00 45011 4.50 11.00 45064 4.50 64.00
40170 4.00 170.00 45012 4.50 12.00 45065 4.50 65.00
40171 4.00 171.00 45013 4.50 13.00 45066 4.50 66.00
40172 4.00 172.00 45015 4.50 15.00 45068 4.50 68.00
40173 4.00 173.00 V175 45016 4.50 16.00 45069 4.50 69.00
40174 4.00 174.00 45017 4.50 17.00 45070 4.50 70.00
40175 4.00 175.00 45018 4.50 18.00 45071 4.50 71.00
40176 4.00 176.00 45019 4.50 19.00 45073 4.50 73.00
40177 4.00 177.00 45020 4.50 20.00 45074 4.50 74.00
40178 4.00 178.00 45021 4.50 21.00 45075 4.50 75.00
40179 4.00 179.00 45022 4.50 22.00 45076 4.50 76.00
40180 4.00 180.00 45023 4.50 23.00 45080 4.50 80.00
40181 4.00 181.00 45024 4.50 24.00 45081 4.50 81.00
40182 4.00 182.00 45025 4.50 25.00 45083 4.50 83.00
40183 4.00 183.00 45026 4.50 26.00 45085 4.50 85.00
40184 4.00 184.00 45028 4.50 28.00 45086 4.50 86.00
40185 4.00 185.00 45029 4.50 29.00 45089 4.50 89.00
40186 4.00 186.00 45030 4.50 30.00 45090 4.50 90.00
40187 4.00 187.00 45031 4.50 31.00 45092 4.50 92.00
40188 4.00 188.00 45032 4.50 32.00 45095 4.50 95.00
40189 4.00 189.00 45033 4.50 33.00 45098 4.50 98.00
40190 4.00 190.00 45034 4.50 34.00 45100 4.50 100.00
40191 4.00 191.00 45035 4.50 35.00 45101 4.50 101.00
40192 4.00 192.00 45036 4.50 36.00 45105 4.50 105.00
40193 4.00 193.00 45037 4.50 37.00 45106 4.50 106.00
40194 4.00 194.00 45038 4.50 38.00 45110 4.50 110.00
40195 4.00 195.00 45039 4.50 39.00 45115 4.50 115.00
40196 4.00 196.00 45040 4.50 40.00 45118 4.50 118.00
40197 4.00 197.00 45041 4.50 41.00 45120 4.50 120.00
184 HITECHSEALS.COM
45122 4.50 122.00 50037 5.00 37.00 50083 5.00 83.00
45124 4.50 124.00 50038 5.00 38.00 50084 5.00 84.00
45126 4.50 126.00 50039 5.00 39.00 50085 5.00 85.00
45128 4.50 128.00 50040 5.00 40.00 50086 5.00 86.00
O-Rings
45130 4.50 130.00 50041 5.00 41.00 50087 5.00 87.00
O-Rings
45137 4.50 137.00 50042 5.00 42.00 50088 5.00 88.00
45140 4.50 140.00 50043 5.00 43.00 50089 5.00 89.00
45150 4.50 150.00 50044 5.00 44.00 50090 5.00 90.00
45153 4.50 153.00 50045 5.00 45.00 50091 5.00 91.00
45155 4.50 155.00 50046 5.00 46.00 50092 5.00 92.00
45157 4.50 157.00 50047 5.00 47.00 50093 5.00 93.00
45160 4.50 160.00 50048 5.00 48.00 50094 5.00 94.00
45165 4.50 165.00 50049 5.00 49.00 50095 5.00 95.00
50004 5.00 4.00 50050 5.00 50.00 50096 5.00 96.00
50005 5.00 5.00 50051 5.00 51.00 50097 5.00 97.00
50006 5.00 6.00 50052 5.00 52.00 50098 5.00 98.00
50007 5.00 7.00 50053 5.00 53.00 50099 5.00 99.00
50008 5.00 8.00 50054 5.00 54.00 50100 5.00 100.00
50009 5.00 9.00 50055 5.00 55.00 50101 5.00 101.00
50010 5.00 10.00 50056 5.00 56.00 50102 5.00 102.00
50011 5.00 11.00 50057 5.00 57.00 50103 5.00 103.00
50012 5.00 12.00 50058 5.00 58.00 50104 5.00 104.00
50013 5.00 13.00 50059 5.00 59.00 50105 5.00 105.00
50014 5.00 14.00 50060 5.00 60.00 50106 5.00 106.00
50015 5.00 15.00 50061 5.00 61.00 50107 5.00 107.00
50016 5.00 16.00 50062 5.00 62.00 50108 5.00 108.00
50017 5.00 17.00 50063 5.00 63.00 50109 5.00 109.00
50018 5.00 18.00 50064 5.00 64.00 50110 5.00 110.00
50019 5.00 19.00 50065 5.00 65.00 50111 5.00 111.00
50020 5.00 20.00 50066 5.00 66.00 50112 5.00 112.00
50021 5.00 21.00 50067 5.00 67.00 50113 5.00 113.00
50022 5.00 22.00 50068 5.00 68.00 50114 5.00 114.00
50023 5.00 23.00 50069 5.00 69.00 50115 5.00 115.00
50024 5.00 24.00 50070 5.00 70.00 50116 5.00 116.00
50025 5.00 25.00 50071 5.00 71.00 50117 5.00 117.00
50026 5.00 26.00 50072 5.00 72.00 50118 5.00 118.00
50027 5.00 27.00 50073 5.00 73.00 50119 5.00 119.00
50028 5.00 28.00 50074 5.00 74.00 50120 5.00 120.00
50029 5.00 29.00 50075 5.00 75.00 50121 5.00 121.00
50030 5.00 30.00 50076 5.00 76.00 50122 5.00 122.00
50031 5.00 31.00 50077 5.00 77.00 50123 5.00 123.00
50032 5.00 32.00 50078 5.00 78.00 50124 5.00 124.00
50033 5.00 33.00 50079 5.00 79.00 50125 5.00 125.00
50034 5.00 34.00 50080 5.00 80.00 50126 5.00 126.00
50035 5.00 35.00 50081 5.00 81.00 50127 5.00 127.00
50036 5.00 36.00 50082 5.00 82.00 50128 5.00 128.00
HITECHSEALS.COM 185

50129 5.00 129.00 50175 5.00 175.00 50221 5.00 221.00
50130 5.00 130.00 50176 5.00 176.00 50222 5.00 222.00
50131 5.00 131.00 50177 5.00 177.00 50223 5.00 223.00
50132 5.00 132.00 50178 5.00 178.00 50224 5.00 224.00
O-Rings
50133 5.00 133.00 50179 5.00 179.00 50225 5.00 225.00

O-Rings
50134 5.00 134.00 50180 5.00 180.00 50226 5.00 226.00

50135 5.00 135.00 50181 5.00 181.00 50227 5.00 227.00
50136 5.00 136.00 50182 5.00 182.00 50228 5.00 228.00
50137 5.00 137.00 50183 5.00 183.00 50229 5.00 229.00
50138 5.00 138.00 50184 5.00 184.00 50230 5.00 230.00
50139 5.00 139.00 50185 5.00 185.00 50231 5.00 231.00
50140 5.00 140.00 50186 5.00 186.00 50232 5.00 232.00
50141 5.00 141.00 50187 5.00 187.00 50233 5.00 233.00
50142 5.00 142.00 50188 5.00 188.00 50234 5.00 234.00
50143 5.00 143.00 50189 5.00 189.00 50235 5.00 235.00
50144 5.00 144.00 50190 5.00 190.00 50236 5.00 236.00
50145 5.00 145.00 50191 5.00 191.00 50237 5.00 237.00
50146 5.00 146.00 50192 5.00 192.00 50238 5.00 238.00
50147 5.00 147.00 50193 5.00 193.00 50239 5.00 239.00
50148 5.00 148.00 50194 5.00 194.00 50240 5.00 240.00
50149 5.00 149.00 50195 5.00 195.00 50241 5.00 241.00
50150 5.00 150.00 50196 5.00 196.00 50242 5.00 242.00
50151 5.00 151.00 50197 5.00 197.00 50243 5.00 243.00
50152 5.00 152.00 50198 5.00 198.00 50244 5.00 244.00
50153 5.00 153.00 50199 5.00 199.00 50245 5.00 245.00
50154 5.00 154.00 50200 5.00 200.00 50246 5.00 246.00
50155 5.00 155.00 50201 5.00 201.00 50247 5.00 247.00
50156 5.00 156.00 50202 5.00 202.00 50248 5.00 248.00
50157 5.00 157.00 50203 5.00 203.00 50249 5.00 249.00
50158 5.00 158.00 50204 5.00 204.00 50250 5.00 250.00
50159 5.00 159.00 50205 5.00 205.00 53040 5.30 40.00
50160 5.00 160.00 50206 5.00 206.00 530412 5.30 41.20
50161 5.00 161.00 50207 5.00 207.00 530414 5.30 41.40
50162 5.00 162.00 50208 5.00 208.00 530425 5.30 42.50
50163 5.00 163.00 50209 5.00 209.00 530437 5.30 43.70
50164 5.00 164.00 50210 5.00 210.00 53045 5.30 45.00
50165 5.00 165.00 50211 5.00 211.00 530462 5.30 46.20
50166 5.00 166.00 50212 5.00 212.00 530475 5.30 47.50
50167 5.00 167.00 50213 5.00 213.00 530487 5.30 48.70
50168 5.00 168.00 50214 5.00 214.00 53050 5.30 50.00
50169 5.00 169.00 50215 5.00 215.00 530515 5.30 51.50
50170 5.00 170.00 50216 5.00 216.00 53053 5.30 53.00
50171 5.00 171.00 50217 5.00 217.00 530544 5.30 54.40
50172 5.00 172.00 50218 5.00 218.00 530545 5.30 54.50
50173 5.00 173.00 50219 5.00 219.00 53056 5.30 56.00
50174 5.00 174.00 50220 5.00 220.00 53058 5.30 58.00
186 HITECHSEALS.COM
53060 5.30 60.00 -312 5.33 15.24 -312 -358 5.33 142.24 -358
530615 5.30 61.50 -313 5.33 16.81 -313 -359 5.33 145.42 -359
53063 5.30 63.00 -314 5.33 18.42 -314 -360 5.33 148.59 -360
53065 5.30 65.00 -315 5.33 19.99 -315 -361 5.33 151.77 -361
O-Rings
53067 5.30 67.00 -316 5.33 21.59 -316 -362 5.33 158.12 -362
O-Rings
53069 5.30 69.00 -317 5.33 23.16 -317 -363 5.33 164.47 -363
53071 5.30 71.00 -318 5.33 24.77 -318 -364 5.33 170.82 -364
53073 5.30 73.00 -319 5.33 26.34 -319 -365 5.33 177.17 -365
53075 5.30 75.00 -320 5.33 27.94 -320 -366 5.33 183.52 -366
530775 5.30 77.50 -321 5.33 29.51 -321 -367 5.33 189.87 -367
53080 5.30 80.00 -322 5.33 31.12 -322 -368 5.33 196.22 -368
530825 5.30 82.50 -323 5.33 32.69 -323 -369 5.33 202.57 -369
53085 5.30 85.00 -324 5.33 34.29 -324 -370 5.33 208.92 -370
530875 5.30 87.50 -325 5.33 37.47 -325 -371 5.33 215.27 -371
53090 5.30 90.00 -326 5.33 40.64 -326 -372 5.33 221.62 -372
530925 5.30 92.50 -327 5.33 43.82 -327 -373 5.33 227.97 -373
53095 5.30 95.00 -328 5.33 46.99 -328 -374 5.33 234.32 -374
530975 5.30 97.50 -329 5.33 50.17 -329 -375 5.33 240.67 -375
53100 5.30 100.00 -330 5.33 53.34 -330 -376 5.33 2 47.02 -376
53103 5.30 103.00 -331 5.33 56.52 -331 -377 5.33 253.37 -377
53106 5.30 106.00 -332 5.33 59.69 -332 -378 5.33 266.07 -378
53109 5.30 109.00 -333 5.33 62.87 -333 -379 5.33 278.77 -379
53112 5.30 112.00 -334 5.33 66.04 -334 -380 5.33 291.47 -380
53115 5.30 115.00 -335 5.33 69.22 -335 -381 5.33 304.17 -381
53118 5.30 118.00 -336 5.33 72.39 -336 -382 5.33 329.57 -382
53122 5.30 122.00 -337 5.33 75.57 -337 -383 5.33 354.97 -383
53125 5.30 125.00 -338 5.33 78.74 -338 -384 5.33 380.37 -384
53128 5.30 128.00 -339 5.33 81.92 -339 -385 5.33 405.26 -385
53132 5.30 132.00 -340 5.33 85.09 -340 -386 5.33 430.66 -386
53136 5.30 136.00 -341 5.33 88.27 -341 -387 5.33 456.06 -387
53140 5.30 140.00 -342 5.33 91.44 -342 -388 5.33 481.38 -388
53145 5.30 145.00 -343 5.33 94.62 -343 -389 5.33 506.78 -389
53150 5.30 150.00 -344 5.33 97.79 -344 -390 5.33 532.18 -390
53155 5.30 155.00 -345 5.33 100.97 -345 -391 5.33 557.58 -391
53160 5.30 160.00 -346 5.33 104.14 -346 -392 5.33 582.68 -392
53165 5.30 165.00 -347 5.33 107.32 -347 -393 5.33 608.08 -393
53170 5.30 170.00 -348 5.33 110.49 -348 -394 5.33 633.48 -394
53175 5.30 175.00 -349 5.33 113.67 -349 -395 5.33 658.88 -395
53180 5.30 180.00 -350 5.33 116.84 -350 570242 5.70 24.20
53185 5.30 185.00 -351 5.33 120.02 -351 570352 5.70 35.20
53190 5.30 190.00 -352 5.33 123.19 -352 570362 5.70 36.20
53195 5.30 195.00 -353 5.33 126.37 -353 570372 5.70 37.20
53200 5.30 200.00 -354 5.33 129.54 -354 570392 5.70 39.20
-309 5.33 10.46 -309 -355 5.33 132.72 -355 570412 5.70 41.20
-310 5.33 12.07 -310 -356 5.33 135.89 -356 570442 5.70 44.20
-311 5.33 13.64 -311 -357 5.33 139.07 -357 570443 5.70 44.30
HITECHSEALS.COM 187

570452 5.70 45.20 57074 5.70 74.00 571493 5.70 149.30 G 150
570453 5.70 45.30 570742 5.70 74.20 571496 5.70 149.60 P 150
570472 5.70 47.20 570743 5.70 74.30 571543 5.70 154.30 G 155
570476 5.70 47.60 P 48A 570746 5.70 74.60 P 75 571593 5.70 159.30 G 160
O-Rings
570492 5.70 49.20 570772 5.70 77.20 571642 5.70 164.20

O-Rings
570493 5.70 49.30 57079 5.70 79.00 571643 5.70 164.30 G 165
570496 5.70 49.60 P 50A 570792 5.70 79.20 571693 5.70 169.30 G 170
570512 5.70 51.20 570793 5.70 79.30 571742 5.70 174.20
570516 5.70 51.60 P 52 570796 5.70 79.60 P 80 571743 5.70 174.30 G 175
570522 5.70 52.20 570812 5.70 81.20 571793 5.70 179.30 G 180
570523 5.70 52.30 570822 5.70 82.20 571843 5.70 184.30 G 185
570525 5.70 52.50 570842 5.70 84.20 571892 5.70 189.20
570526 5.70 52.60 P 53 570846 5.70 84.60 P 85 571893 5.70 189.30 G 190
570530 5.70 53.00 570872 5.70 87.20 571942 5.70 194.20
570542 5.70 54.20 570891 5.70 89.10 571943 5.70 194.30 G 195
570543 5.70 54.30 570892 5.70 89.20 571992 5.70 199.20
570546 5.70 54.60 P 55 570893 5.70 89.30 571993 5.70 199.30 G 200
570552 5.70 55.20 570896 5.70 89.60 P 90 572042 5.70 204.20
570553 5.70 55.30 570922 5.70 92.20 572092 5.70 209.20
570556 5.70 55.60 P 56 570942 5.70 94.20 572093 5.70 209.30 G 210
570572 5.70 57.20 570946 5.70 94.60 P 95 572193 5.70 219.30 G 220
570576 5.70 57.60 P 58 570966 5.70 96.60 572293 5.70 229.30 G 230
570592 5.70 59.20 570992 5.70 99.20 572343 5.70 234.30
570593 5.70 59.30 570996 5.70 99.60 P 100 572393 5.70 239.30 G 240
570596 5.70 59.60 P 60 571016 5.70 101.60 P 102 572493 5.70 249.30 G 250
570597 5.70 59.70 571046 5.70 104.60 P 105 572593 5.70 259.30 G 260
570612 5.70 61.20 571092 5.70 109.20 572693 5.70 269.30 G 270
570616 5.70 61.60 P 62 571093 5.70 109.30 572793 5.70 279.30 G 280
57062 5.70 62.00 571096 5.70 109.60 P 110 572893 5.70 289.30 G 290
570622 5.70 62.20 571116 5.70 111.60 P 112 572993 5.70 299.30 G 300
570623 5.70 62.30 571142 5.70 114.20 573193 5.70 319.30 6320
570626 5.70 62.60 P 63 571143 5.70 114.30 573393 5.70 339.30 6340
57064 5.70 64.00 571146 5.70 114.60 P 115 573493 5.70 349.30 6350
570642 5.70 64.20 571192 5.70 119.20 573593 5.70 359.30 6360
570643 5.70 64.30 571196 5.70 119.60 P 120 573793 5.70 379.30 6380
570646 5.70 64.60 P 65 571246 5.70 124.60 P 125 573993 5.70 399.30 6400
570666 5.70 66.60 P 67 571292 5.70 129.20 60012 6.00 12.00
570672 5.70 67.20 571296 5.70 129.60 P 130 60018 6.00 18.00
57069 5.70 69.00 571316 5.70 131.60 P 132 60020 6.00 20.00
570692 5.70 69.20 571342 5.70 134.20 60023 6.00 23.00
570693 5.70 69.30 571346 5.70 134.60 P 135 60024 6.00 24.00
570696 5.70 69.60 P 70 571392 5.70 139.20 60025 6.00 25.00
570702 5.70 70.20 571393 5.70 139.30 60026 6.00 26.00
570706 5.70 70.60 P 71 571396 5.70 139.60 P 140 60032 6.00 32.00
570712 5.70 71.20 571442 5.70 144.20 60034 6.00 34.00
570722 5.70 72.20 571446 5.70 144.60 P 145 60035 6.00 35.00
570723 5.70 72.30 571492 5.70 149.20 60036 6.00 36.00
188 HITECHSEALS.COM
60037 6.00 37.00 60130 6.00 130.00 60392 6.00 392.00
60038 6.00 38.00 60134 6.00 134.00 60394 6.00 394.00
60040 6.00 40.00 60135 6.00 135.00 604255 6.00 425.50 V 430
60041 6.00 41.00 60138 6.00 138.00 60429 6.00 429.00
O-Rings
60042 6.00 42.00 60140 6.00 140.00 60445 6.00 445.00
O-Rings
60044 6.00 44.00 60142 6.00 142.00 60478 6.00 478.00
60045 6.00 45.00 60145 6.00 145.00 60480 6.00 480.00
60046 6.00 46.00 60146 6.00 146.00 60500 6.00 500.00
60048 6.00 48.00 60148 6.00 148.00 60504 6.00 504.00
60050 6.00 50.00 60150 6.00 150.00 60525 6.00 525.00
60052 6.00 52.00 60160 6.00 160.00 60575 6.00 575.00
60056 6.00 56.00 60165 6.00 165.00 -425 6.99 113.67 -425
60058 6.00 58.00 60166 6.00 166.00 -426 6.99 116.84 -426
60059 6.00 59.00 60169 6.00 169.00 -427 6.99 120.02 -427
60060 6.00 60.00 60170 6.00 170.00 -428 6.99 123.19 -428
60062 6.00 62.00 60172 6.00 172.00 -429 6.99 126.37 -429
60064 6.00 64.00 60175 6.00 175.00 -430 6.99 129.54 -430
60065 6.00 65.00 60180 6.00 180.00 -431 6.99 132.72 -431
60067 6.00 67.00 60185 6.00 185.00 -432 6.99 135.89 -432
60069 6.00 69.00 60190 6.00 190.00 -433 6.99 139.07 -433
60070 6.00 70.00 60195 6.00 195.00 -434 6.99 142.24 -434
60072 6.00 72.00 60200 6.00 200.00 -435 6.99 145.42 -435
60073 6.00 73.00 60208 6.00 208.00 -436 6.99 148.59 -436
60074 6.00 74.00 60210 6.00 210.00 -437 6.99 151.77 -437
60075 6.00 75.00 60215 6.00 215.00 -438 6.99 158.12 -438
60076 6.00 76.00 60220 6.00 220.00 -439 6.99 164.47 -439
60079 6.00 79.00 602225 6.00 222.50 V 225 -440 6.99 170.82 -440
60080 6.00 80.00 60230 6.00 230.00 -441 6.99 177.17 -441
60085 6.00 85.00 60242 6.00 242.00 -442 6.99 183.52 -442
60086 6.00 86.00 60250 6.00 250.00 -443 6.99 189.87 -443
60088 6.00 88.00 60262 6.00 262.00 -444 6.99 196.22 -444
60090 6.00 90.00 60266 6.00 266.00 -445 6.99 202.57 -445
60092 6.00 92.00 60270 6.00 270.00 -446 6.99 215.27 -446
60095 6.00 95.00 60272 6.00 272.00 V 275 -447 6.99 227.97 -447
60098 6.00 98.00 60290 6.00 290.00 -448 6.99 240.67 -448
60100 6.00 100.00 60295 6.00 295.00 -449 6.99 253.37 -449
60103 6.00 103.00 60300 6.00 300.00 -450 6.99 266.07 -450
60105 6.00 105.00 60320 6.00 320.00 -451 6.99 278.77 -451
60110 6.00 110.00 603215 6.00 321.50 V 325 -452 6.99 291.47 -452
60112 6.00 112.00 60330 6.00 330.00 -453 6.99 304.17 -453
60114 6.00 114.00 60355 6.00 355.00 -454 6.99 316.87 -454
60115 6.00 115.00 60365 6.00 365.00 -455 6.99 329.57 -455
60118 6.00 118.00 60370 6.00 370.00 -456 6.99 342.27 -456
60120 6.00 120.00 60376 6.00 376.00 -457 6.99 354.97 -457
60122 6.00 122.00 603765 6.00 376.50 V 380 -458 6.99 367.67 -458
60125 6.00 125.00 60380 6.00 380.00 -459 6.99 380.37 -459
60128 6.00 128.00 60385 6.00 385.00 -460 6.99 393.07 -460
HITECHSEALS.COM 189

-461 6.99 405.26 -461 70212 7.00 212.00 80110 8.00 110.00
-462 6.99 417.96 -462 70215 7.00 215.00 80112 8.00 112.00
-463 6.99 430.66 -463 70217 7.00 217.00 80125 8.00 125.00
-464 6.99 443.36 -464 70220 7.00 220.00 80140 8.00 140.00
O-Rings
-465 6.99 456.06 -465 70230 7.00 230.00 80144 8.00 144.00
-466 6.99 468.76 -466 70234 7.00 234.00 80145 8.00 145.00
-467 6.99 481.46 -467 702343 7.00 234.30 80160 8.00 160.00
-468 6.99 494.16 -468 70235 7.00 235.00 80175 8.00 175.00
-469 6.99 506.86 -469 70236 7.00 236.00 80184 8.00 184.00
-470 6.99 532.26 -470 70240 7.00 240.00 80185 8.00 185.00
-471 6.99 557.66 -471 70247 7.00 247.00 80188 8.00 188.00
-472 6.99 582.68 -472 70250 7.00 250.00 80200 8.00 200.00
-473 6.99 608.08 -473 702597 7.00 259.70 80205 8.00 205.00
-474 6.99 633.48 -474 70266 7.00 266.00 80210 8.00 210.00
-475 6.99 658.88 -475 702851 7.00 285.10 80230 8.00 230.00
70011 7.00 11.00 702978 7.00 297.80 80235 8.00 235.00
70015 7.00 15.00 70300 7.00 300.00 80245 8.00 245.00
70023 7.00 23.00 70310 7.00 310.00 80278 8.00 278.00
70034 7.00 34.00 70325 7.00 325.00 80290 8.00 290.00
70035 7.00 35.00 70329 7.00 329.00 80300 8.00 300.00
70040 7.00 40.00 70338 7.00 338.00 80308 8.00 308.00
70058 7.00 58.00 70348 7.00 348.00 80320 8.00 320.00
70059 7.00 59.00 70388 7.00 388.00 80326 8.00 326.00
70060 7.00 60.00 70400 7.00 400.00 80330 8.00 330.00
70068 7.00 68.00 70416 7.00 416.00 80425 8.00 425.00
70079 7.00 79.00 70430 7.00 430.00 80440 8.00 440.00
70083 7.00 83.00 70431 7.00 431.00 80470 8.00 470.00
70094 7.00 94.00 70437 7.00 437.00 80475 8.00 475.00
70096 7.00 96.00 70448 7.00 448.00 80480 8.00 480.00
70106 7.00 106.00 70515 7.00 515.00 80490 8.00 490.00
70107 7.00 107.00 70540 7.00 540.00 80500 8.00 500.00
70110 7.00 110.00 70558 7.00 558.00 80565 8.00 565.00
70111 7.00 111.00 70625 7.00 625.00 841441 8.40 144.10
701147 7.00 114.70 80016 8.00 16.00 841495 8.40 149.50 P 150A
70115 7.00 115.00 80025 8.00 25.00 841541 8.40 154.10
70120 7.00 120.00 80033 8.00 33.00 841545 8.40 154.50 P 155
70128 7.00 128.00 80050 8.00 50.00 841591 8.40 159.10
70150 7.00 150.00 80054 8.00 54.00 841595 8.40 159.50 P 160
701595 7.00 159.50 80055 8.00 55.00 841641 8.40 164.10
70160 7.00 160.00 80060 8.00 60.00 841645 8.40 164.50 P 165
701667 7.00 166.70 80065 8.00 65.00 841695 8.40 169.50 P 170
701746 7.00 174.60 80067 8.00 67.00 841741 8.40 174.10
70181 7.00 181.00 80070 8.00 70.00 841745 8.40 174.50 P 175
701873 7.00 187.30 80075 8.00 75.00 841795 8.40 179.50 P 180
70200 7.00 200.00 80090 8.00 90.00 841845 8.40 184.50 P 185
702089 7.00 208.90 80092 8.00 92.00 841895 8.40 189.50 P 190
190 HITECHSEALS.COM
Part Cross Part Cross
Number C/S I.D. Ref. # Number C/S I.D. Ref. #
841941 8.40 194.10 842495 8.40 249.50 P 250
841945 8.40 194.50 P 195 842545 8.40 254.50 P 255
841991 8.40 199.10 842595 8.40 259.50 P 260
841995 8.40 199.50 P 200 842645 8.40 264.50 P 265
O-Rings
O-Rings
842041 8.40 204.10 842695 8.40 269.50 P 270
842045 8.40 204.50 P 205 842745 8.40 274.50 P 275
842085 8.40 208.50 P 209 84319 8.40 319.00
842091 8.40 209.10 843345 8.40 334.50
842095 8.40 209.50 P 210 844191 8.40 419.10
842145 8.40 214.50 P 215 10X475 10.00 475.00 V 480
842191 8.40 219.10 10X5245 10.00 524.50 V 530
842195 8.40 219.50 P 220 10X579 10.00 579.00 V 585
842245 8.40 224.50 P 225 10X6335 10.00 633.50 V 640
842295 8.40 229.50 P 230 10X683 10.00 683.00 V 690
842345 8.40 234.50 P 235 10X7325 10.00 732.50 V 740
842391 8.40 239.10 10X782 10.00 782.00 V 790
842395 8.40 239.50 P 240 10X8365 10.00 836.50 V 845
842445 8.40 244.50 P 245 10X1044 10.00 1044.00 V 1055
HITECHSEALS.COM 191
O-Ring Cord Metric Seals

O-Ring Cord

Cross- Sections (mm)

1.00 3.50 7.00
1.50 4.00 8.00
1.60 4.50 8.40
2.00 5.00 9.00
2.40 5.50 10.00
O-Ring Square Cut Ring 2.50 5.70 10.50
3.00 6.00 >10.50
Product Description
O-ring cord is excellent for large diameter static applications. We sell O-ring cord by the foot. Custom O-ring sizes can
be manufactured through our in-house splice and vulcanizing service.
Part Numbers:
CO ___ - ___ ___ ___ ___ ___ ___ ___
C/S NEO - Neoprene

HNBR - Hydrogenated Nitrile
M - Nitrile/Neoprene SPONGE - Sponge Material
V - Viton™ S - Square Cut
S - Silicone
E - EPDM
Example: COM 3S - Square Cut Nitrile Cord, 3.00 mm C/S
192 HITECHSEALS.COM
Metric Seals O-Ring Kits
O-Ring Kits
Product Description
We offer O-ring kits in popular materials such as nitrile, and Viton™/fluorocarbon. O-ring kits are an excellent tool for shops,
maintenance workers, or crews out in the field.
Part Numbers:
KIT - ___ ___ ___ ___ ___ ___ ___
Description
Example: KIT METRICCVITON - Viton™ 75 Durometer Metric O-Ring Kit
HITECHSEALS.COM 193
O-Ring Kits Metric Seals
O-Ring Kits
KIT METRICC - Nitrile 70 Durometer KIT METRICD - Nitrile 70 Durometer
Contents Description (C/S x I.D.) Quantity Contents Description (C/S x I.D.) Quantity
MN7 15003 1.50 x 3.00 20 MN7 20018 2.00 x 18.00 15
MN7 15005 1.50 x 5.00 20 MN7 20020 2.00 x 20.00 15
MN7 15007 1.50 x 7.00 20 MN7 30022 3.00 x 22.00 15
MN7 15009 1.50 x 9.00 20 MN7 30025 3.00 x 25.00 15
MN7 15011 1.50 x 11.00 20 MN7 300282 3.00 x 28.20 15
MN7 20006 2.00 x 6.00 20 MN7 300302 3.00 x 30.20 15
MN7 20008 2.00 x 8.00 20 MN7 300322 3.00 x 32.20 10
MN7 20010 2.00 x 10.00 20 MN7 300362 3.00 x 36.20 10.
MN7 20012 2.00 x 12.00 20 MN7 40025 4.00 x 25.00 15
MN7 20014 2.00 x 14.00 20 MN7 40030 4.00 x 30.00 15
MN7 240063 2.40 x 6.30 15 MN7 40032 4.00 x 32.00 15
MN7 240083 2.40 x 8.30 15 MN7 40034 4.00 x 34.00 15
MN7 240113 2.40 x 11.30 15 MN7 40036 4.00 x 36.00 15
MN7 240133 2.40 x 13.30 15 MN7 40038 4.00 x 38.00 10
MN7 240173 2.40 x 17.30 15 MN7 40040 4.00 x 40.00 10
MN7 25005 2.50 x 5.00 15 MN7 40044 4.00 x 44.00 10
MN7 25007 2.50 x 7.00 15 MN7 40048 4.00 x 48.00 10
MN7 25010 2.50 x 10.00 15 MN7 40050 4.00 x 50.00 10
MN7 25012 2.50 x 12.00 15 MN7 50025 5.00 x 25.00 10
MN7 25015 2.50 x 15.00 15 MN7 50030 5.00 x 30.00 10
MN7 30010 3.00 x 10.00 10 MN7 50035 5.00 x 35.00 10
MN7 30012 3.00 x 12.00 10 MN7 50040 5.00 x 40.00 10
MN7 30014 3.00 x 14.00 10 MN7 50045 5.00 x 45.00 5
MN7 30016 3.00 x 16.00 10 MN7 50050 5.00 x 50.00 5
MN7 30018 3.00 x 18.00 10
MN7 300202 3.00 x 20.20 5 Also available:
MN7 300222 3.00 x 22.20 5 KIT METRICD90 - Nitrile 90 Durometer
MN7 300242 3.00 x 24.20 5
MN7 300262 3.00 x 26.20 5
MN7 300302 3.00 x 30.20 5
Also available:
KIT METRICCN90 - Nitrile 90 Durometer
KIT METRICCVITON - Viton™ 75 Durometer
194 HITECHSEALS.COM
Metric Seals O-Ring Kits
O-Ring Kits
KIT METRICN70 - Nitrile 70 Durometer KIT METRICN90 - Nitrile 90 Durometer
Contents Description (C/S x I.D.) Quantity Contents Description (C/S x I.D.) Quantity
MN7 20003 2.00 x 3.00 16 MN9 20004 2.00 x 4.00 16
MN7 20004 2.00 x 4.00 16 MN9 20005 2.00 x 5.00 16
MN7 20005 2.00 x 5.00 16 MN9 20006 2.00 x 6.00 16
MN7 20006 2.00 x 6.00 16 MN9 20007 2.00 x 7.00 16
MN7 20007 2.00 x 7.00 16 MN9 20008 2.00 x 8.00 16
MN7 20008 2.00 x 8.00 16 MN9 20010 2.00 x 10.00 16
MN7 20010 2.00 x 10.00 16 MN9 25010 2.50 x 10.00 13
MN7 25010 2.50 x 10.00 13 MN9 25011 2.50 x 11.00 13
MN7 25011 2.50 x 11.00 13 MN9 25012 2.50 x 12.00 13
MN7 25012 2.50 x 12.00 13 MN9 25014 2.50 x 14.00 13
MN7 25014 2.50 x 14.00 13 MN9 25016 2.50 x 16.00 13
MN7 25016 2.50 x 16.00 13 MN9 25017 2.50 x 17.00 13
MN7 25017 2.50 x 17.00 13 MN9 25019 2.50 x 19.00 13
MN7 25019 2.50 x 19.00 13 MN9 30019 3.00 x 19.00 12
MN7 30019 3.00 x 19.00 12 MN9 30020 3.00 x 20.00 12
MN7 30020 3.00 x 20.00 12 MN9 30022 3.00 x 22.00 12
MN7 30022 3.00 x 22.00 12 MN9 30023 3.00 x 23.00 12
MN7 30024 3.00 x 24.00 12 MN9 30025 3.00 x 25.00 12
MN7 30025 3.00 x 25.00 12 MN9 30027 3.00 x 27.00 12
MN7 30027 3.00 x 27.00 12 MN9 30028 3.00 x 28.00 12
MN7 30028 3.00 x 28.00 12 MN9 30030 3.00 x 30.00 12
MN7 30030 3.00 x 30.00 12 MN9 30034 3.00 x 34.00 12
MN7 30032 3.00 x 32.00 12 MN9 30035 3.00 x 35.00 12
MN7 30033 3.00 x 33.00 12 MN9 30036 3.00 x 36.00 12
MN7 30035 3.00 x 35.00 12 MN9 30038 3.00 x 38.00 12
MN7 30036 3.00 x 36.00 12 MN9 40038 4.00 x 38.00 9
MN7 30038 3.00 x 38.00 12 MN9 40040 4.00 x 40.00 9
MN7 40038 4.00 x 38.00 9 MN9 40044 4.00 x 44.00 9
MN7 40041 4.00 x 41.00 9
MN7 40044 4.00 x 44.00 9
HITECHSEALS.COM 195
O-Ring Kits Metric Seals
O-Ring Kits
KIT JIS - Nitrile 70 Durometer

JIS - Japanese Industrial Standard KIT SPLICINGIMPMET - Nitrile 70 Durometer Cord
Contents Description (C/S x I.D.) Quantity Contents Description (C/S) Quantity

MN7 190028 1.90 x 2.80 (P-3) 25 CON 070 0.070” (1.78 mm) Nitrile Cord 7 ft..
MN7 190078 1.90 x 7.80 (P-8) 15 COM 16 1.60 mm Nitrile Cord 5 ft..
MN7 240098 2.40 x 9.80 (P-10A) 15 COM 3 3.00 mm Nitrile Cord 5 ft..
MN7 24011 2.40 x 11.00 (P-11.2) 15 KIT GLUE Glue 1
MN7 240118 2.40 x 11.80 (P-12) 12 Cutting Tool 1
MN7 240123 2.40 x 12.30 (P-12.5) 12
MN7 240138 2.40 x 13.80 (P-14) 12
MN7 240148 2.40 x 14.80 (P-15) 12
MN7 240158 2.40 x 15.80 (P-16) 12
MN7 240178 2.40 x 17.80 (P-18) 8
MN7 240198 2.40 x 19.80 (P-20) 8
MN7 240208 2.40 x 20.80 (P-21) 8
MN7 240218 2.40 x 21.80 (P-22) 8
MN7 310244 3.10 x 24.40 (G-25) 6
MN7 310294 3.10 x 29.40 (G-30) 7
MN7 350217 3.50 x 21.70 (P-22A) 5
MN7 350221 3.50 x 22.10 (P-22.4) 5
MN7 350237 3.50 x 23.70 (P-24) 7
MN7 350247 3.50 x 24.70 (P-25) 7
MN7 350252 3.50 x 25.20 (P-25.5) 7
MN7 350257 3.50 x 25.70 (P-26) 7
MN7 350277 3.50 x 27.70 (P-28) 7
MN7 350287 3.50 x 28.70 (P-29) 6
MN7 350292 3.50 x 29.20 (P-29.5) 6
MN7 350297 3.50 x 29.70 (P-30) 6
MN7 350307 3.50 x 30.70 (P-31) 6
MN7 350312 3.50 x 31.20 (P-31.5) 6
MN7 400145 4.00 x 14.50 (V-15) 4
MN7 400235 4.00 x 23.50 (V-24) 6
196 HITECHSEALS.COM
Metric Seals Back-Up Rings
Back-Up Rings
Solid Flat Scarf Cut Spiral Cut Solid Contoured Butt Cut
Product Description
Back-up rings are plastic or rubber rings used to prevent the O-ring from entering the clearance gap. When high pressures
are exerted on the O-ring, its soft rubber material can be forced into the clearance gap causing the O-ring to extrude (see our
O-ring brochure for examples of O-ring failure). The hard back-up rings' material will keep the O-ring material from flowing
into the gap which will prevent premature failure.
Part Numbers:
B ___ M - ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height

N - Nylon
T - PTFE
U - Urethane
Example: BNM 1251453 - Back-Up Ring, Nylon, 125.00 mm I.D. 145.000 mm O.D. 3.00 mm Height
HITECHSEALS.COM 197
Capped T- Seals Metric Seals
Seal (Cap) Materials Temp. Range

Seals
T-Seals
Energizer Materials

Capped T-

Capped
Back-up Ring Materials

Product Description
Capped T-seals are a double-acting, high pressure, high performance piston seal. They are designed to accommodate
large extrusion gaps. The major benefits of this design are its excellent extrusion resistance, low friction, and low wear, all
pre¬sented in a compact and stable design. Standard capped T-seals consist of four pieces, including, a nitrile energizer, a
filled PTFE cap, and two nylon anti-extrusion rings.
Capped T-Seals are available in an inter-locking design, upon request. This design eases the installation process and reduce
the change of installing the back-up rings incorrectly.
Part Numbers:
M4P - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
O.D. I.D. Width

Material - if other than standard
Example: M4P 10085125 - Capped T-Seal, 85.00 mm I.D., 100.00 mm O.D., 12.50 mm Width
198 HITECHSEALS.COM
Metric Seals Capped T- Seals
C
Capped
Capped T-
B A
T-Seals
Seals
Groove Dimensions Piston Clearance
A B C w/o w/
Bore Groove Groove Nominal Wear Wear
Part Number Diameter Tolerance Diameter Tolerance Width Tolerance C/S Ring Ring
M4P 50369 50.00 0.05/-0.00 36.00 0.00/-0.05 9.00 0.25/-0.00 7.00 0.15 0.76
M4P 50408 50.00 0.05/-0.00 40.00 0.00/-0.05 8.00 0.25/-0.00 5.00 0.15 0.76
M4P 55419 55.00 0.05/-0.00 41.00 0.00/-0.05 9.00 0.25/-0.00 7.00 0.15 0.76
M4P 60469 60.00 0.05/-0.00 46.00 0.00/-0.05 9.00 0.25/-0.00 7.00 0.15 0.76
M4P 60508 60.00 0.05/-0.00 50.00 0.00/-0.05 8.00 0.25/-0.00 5.00 0.15 0.76
M4P 63538 63.00 0.05/-0.00 53.00 0.00/-0.05 8.00 0.25/-0.00 5.00 0.15 0.76
M4P 655011 65.00 0.08/-0.00 50.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 65519 65.00 0.05/-0.00 51.00 0.00/-0.05 9.00 0.25/-0.00 7.00 0.15 0.76
M4P 705511 70.00 0.08/-0.00 55.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 7055125 70.00 0.08/-0.00 55.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 70608 70.00 0.05/-0.00 60.00 0.00/-0.05 8.00 0.25/-0.00 5.00 0.15 0.76
M4P 756011 75.00 0.08/-0.00 60.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 75639 75.00 0.05/-0.00 63.00 0.00/-0.05 9.00 0.25/-0.00 6.00 0.15 0.76
M4P 806511 80.00 0.08/-0.00 65.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 806512 80.00 0.08/-0.00 65.00 0.00/-0.08 12.00 0.25/-0.00 7.50 0.20 0.94
M4P 8065125 80.00 0.08/-0.00 65.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 857011 85.00 0.08/-0.00 70.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 857012 85.00 0.08/-0.00 70.00 0.00/-0.08 12.00 0.25/-0.00 7.50 0.20 0.94
M4P 907511 90.00 0.08/-0.00 75.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 9075125 90.00 0.08/-0.00 75.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 958011 95.00 0.08/-0.00 80.00 0.00/-0.08 11.00 0.25/-0.00 7.50 0.20 0.94
M4P 10085125 100.00 0.08/-0.00 85.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 10590125 105.00 0.08/-0.00 90.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 11095125 110.00 0.08/-0.00 95.00 0.00/0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 115100125 115.00 0.08/-0.00 100.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 12010016 120.00 0.10/-0.00 100.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 120105125 120.00 0.08/-0.00 105.00 0.00/-0.08 12.50 0.25/-0.00 7.50 0.20 0.94
M4P 12510216 125.00 0.10/-0.00 102.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 12510516 125.00 0.10/-0.00 105.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 13010716 130.00 0.10/-0.00 107.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
HITECHSEALS.COM 199
Capped T- Seals Metric Seals
Seals
T-Seals
Capped T-
Groove Dimensions Piston Clearance

Capped
A B C w/o w/
Bore Groove Groove Nominal Wear Wear
Part Number Diameter Tolerance Diameter Tolerance Width Tolerance C/S Ring Ring
M4P 13011016 130.00 0.10/-0.00 110.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 13511216 135.00 0.10/-0.00 112.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 14011716 140.00 0.10/-0.00 117.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 14012016 140.00 0.10/-0.00 120.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 14012019 140.00 0.08/-0.00 120.00 0.00/-0.08 19.00 0.25/-0.00 10.00 0.25 1.12
M4P 14512216 145.00 0.10/-0.00 122.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 15012716 150.00 0.10/-0.00 127.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 15013019 150.00 0.08/-0.00 130.00 0.00/-0.08 19.00 0.25/-0.00 10.00 0.25 1.12
M4P 15513216 155.00 0.10/-0.00 132.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 16013716 160.00 0.10/-0.00 137.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 16014016 160.00 0.10/-0.00 140.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 16014019 160.00 0.08/-0.00 140.00 0.00/-0.08 19.00 0.25/-0.00 10.00 0.25 1.12
M4P 16514216 165.00 0.10/-0.00 142.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 17014716 170.00 0.10/-0.00 147.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 17015016 170.00 0.10/-0.00 150.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 18015716 180.00 0.10/-0.00 157.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 18016016 180.00 0.10/-0.00 160.00 0.00/-0.10 16.00 0.25/-0.00 10.00 0.25 1.12
M4P 18516216 185.00 0.10/-0.00 162.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 19016716 190.00 0.10/-0.00 167.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 20017716 200.00 0.10/-0.00 177.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 21018716 210.00 0.10/-0.00 187.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 22019716 220.00 0.10/-0.00 197.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 22520216 225.00 0.10/-0.00 202.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 23020716 230.00 0.10/-0.00 207.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 24021716 240.00 0.10/-0.00 217.00 0.00/-0.10 16.00 0.25/-0.00 11.50 0.25 1.12
M4P 250222175 250.00 0.13/-0.00 222.00 0.00/-0.13 17.50 0.25/-0.00 14.00 0.25 1.12
M4P 260232175 260.00 0.13/-0.00 232.00 0.00/-0.13 17.50 0.25/-0.00 14.00 0.25 1.12
M4P 270242175 270.00 0.13/-0.00 242.00 0.00/-0.13 17.50 0.25/-0.00 14.00 0.25 1.12
M4P 280252175 280.00 0.13/-0.00 252.00 0.00/-0.13 17.50 0.25/-0.00 14.00 0.25 1.12
M4P 300272175 300.00 0.13/-0.00 272.00 0.00/-0.13 17.50 0.25/-0.00 14.00 0.25 1.12
M4P 320292175 320.00 0.13/-0.00 292.00 0.00/-0.13 17.50 0.25/-0.00 14.00 0.25 1.12
200 HITECHSEALS.COM
Metric Seals Wipers
Wipers
Wipers
D-Style (WDM) Stepped D-Style H-Style (WHM) Stepped H-Style

(WDM) (WHM)
Metal Encased (WCM) Metal Encased (WCM) Metal Encased (WCM) Metal Encased H-Style
Interchangeable Pin Eye (PE) (WCM)
Product Description
Wipers are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act as a
secondary rod seal. If contaminants were to enter a cylinder, it could lead to damage of the rod and/or other sealing com-
ponents. A properly selected wiper could help reduce the need for unscheduled maintenance and even increase the time
between maintenance cycles.
It is important to select the correct style and material for an application. When selecting the material for a wiper, remember
to consider the required abrasion resistance, elasticity, resilience, and fluid compatibility.
HITECHSEALS.COM 201
Wipers Metric Seals
D-Style 0.635 R Max. C
Primary Design
Wipers
Wipers
B A
Interchangable Design
WDM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. C H
Our standard material for a D-Style wiper is urethane.
A B C H A B C H
Shaft Groove Groove Seal Shaft Groove Groove Seal
Part Number Dia. Dia. Width Height Part Number Dia. Dia. Width Height
WDM 1622355 16.00 22.00 3.50 5.00 WDM 526057 52.00 60.00 5.00 7.00
WDM 162457 16.00 24.00 5.00 7.00 WDM 556357 55.00 63.00 5.00 7.00
WDM 202857 20.00 28.00 5.00 7.00 WDM 556557 55.00 65.00 5.00 7.00
WDM 223057 22.00 30.00 5.00 7.00 WDM 566657 56.00 66.00 5.00 7.00
WDM 253357 25.00 33.00 5.00 7.00 WDM 606857 60.00 68.00 5.00 7.00
WDM 263457 26.00 34.00 5.00 7.00 WDM 607057 60.00 70.00 5.00 7.00
WDM 283657 28.00 36.00 5.00 7.00 WDM 616957 61.00 69.00 5.00 7.00
WDM 303857 30.00 38.00 5.00 7.00 WDM 627057 62.00 70.00 5.00 7.00
WDM 324057 32.00 40.00 5.00 7.00 WDM 637157 63.00 71.00 5.00 7.00
WDM 354357 35.00 43.00 5.00 7.00 WDM 637357 63.00 73.00 5.00 7.00
WDM 364457 36.00 44.00 5.00 7.00 WDM 637357 63.00 73.00 5.00 7.00
WDM 384657 38.00 46.00 5.00 7.00 WDM 657357 65.00 73.00 5.00 7.00
WDM 404857 40.00 48.00 5.00 7.00 WDM 657557 65.00 75.00 5.00 7.00
WDM 425057 42.00 50.00 5.00 7.00 WDM 707857 70.00 78.00 5.00 7.00
WDM 455357 45.00 53.00 5.00 7.00 WDM 708057 70.00 80.00 5.00 7.00
WDM 455557 45.00 55.00 5.00 7.00 WDM 7082712 70.00 82.00 7.00 12.00
WDM 475557 47.00 55.00 5.00 7.00 WDM 758357 75.00 83.00 5.00 7.00
WDM 485657 48.00 56.00 5.00 7.00 WDM 7587712 75.00 87.00 7.00 12.00
WDM 505857 50.00 58.00 5.00 7.00 WDM 768457 76.00 84.00 5.00 7.00
WDM 506057 50.00 60.00 5.00 7.00 WDM 808857 80.00 88.00 5.00 7.00
202 HITECHSEALS.COM
Metric Seals Wipers
D-Style
Wipers
Wipers
A B C H A B C H
WDM 8092712 80.00 92.00 7.00 12.00 WDM 125137712 125.00 137.00 7.00 12.00
WDM 829057 82.00 90.00 5.00 7.00 WDM 1251401016 125.00 140.00 10.00 16.00
WDM 859357 85.00 93.00 5.00 7.00 WDM 12814057 128.00 140.00 5.00 7.00
WDM 859557 85.00 95.00 5.00 7.00 WDM 130142712 130.00 142.00 7.00 12.00
WDM 8597712 85.00 97.00 7.00 12.00 WDM 13514357 135.00 143.00 5.00 7.00
WDM 889657 88.00 96.00 5.00 7.00 WDM 135147712 135.00 147.00 7.00 12.00
WDM 909857 90.00 98.00 5.00 7.00 WDM 14014857 140.00 148.00 5.00 7.00
WDM 9010057 90.00 100.00 5.00 7.00 WDM 1401551016 140.00 155.00 10.00 16.00
WDM 90102712 90.00 102.00 7.00 12.00 WDM 15015857 150.00 158.00 5.00 7.00
WDM 95107712 95.00 107.00 7.00 12.00 WDM 150162712 150.00 162.00 7.00 12.00
WDM 10010857 100.00 108.00 5.00 7.00 WDM 150165712 150.00 165.00 7.00 12.00
WDM 100112712 100.00 112.00 7.00 12.00 WDM 1501651016 150.00 165.00 10.00 16.00
WDM 10511357 105.00 113.00 5.00 7.00 WDM 155167712 155.00 167.00 7.00 12.00
WDM 105117712 105.00 117.00 7.00 12.00 WDM 1601751016 160.00 175.00 10.00 16.00
WDM 11011857 110.00 118.00 5.00 7.00 WDM 1701851016 170.00 185.00 10.00 16.00
WDM 110122712 110.00 122.00 7.00 12.00 WDM 1751901016 175.00 190.00 10.00 16.00
WDM 115127712 115.00 127.00 7.00 12.00 WDM 1801951016 180.00 195.00 10.00 16.00
WDM 12012857 120.00 128.00 5.00 7.00 WDM 1802001018 180.00 200.00 10.00 18.00
WDM 12013057 120.00 130.00 5.00 7.00 WDM 1902101016 190.00 210.00 10.00 16.00
WDM 120132712 120.00 132.00 7.00 12.00 WDM 2002201018 200.00 220.00 10.00 18.00
HITECHSEALS.COM 203
Wipers Metric Seals
Stepped D-Style C2
0.635 R Max.
C1
H
Wipers
Wipers
B A
WDM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. C1 C2 H
Our standard material for a Stepped D-Style wiper is urethane.
A B C1 C2 H A B C1 C2 H
Part Number Dia. Dia. Widths Height Part Number Dia. Dia. Widths Height
WDM 816457 8.00 16.00 4.00 5.00 7.00 WDM 6068457 60.00 68.00 4.00 5.00 7.00
WDM 1018457 10.00 18.00 4.00 5.00 7.00 WDM 6270457 62.00 70.00 4.00 5.00 7.00
WDM 1220457 12.00 20.00 4.00 5.00 7.00 WDM 6371457 63.00 71.00 4.00 5.00 7.00
WDM 1624457 16.00 24.00 4.00 5.00 7.00 WDM 6573457 65.00 73.00 4.00 5.00 7.00
WDM 1826457 18.00 26.00 4.00 5.00 7.00 WDM 7078457 70.00 78.00 4.00 5.00 7.00
WDM 2028457 20.00 28.00 4.00 5.00 7.00 WDM 7583457 75.00 83.00 4.00 5.00 7.00
WDM 2230457 22.00 30.00 4.00 5.00 7.00 WDM 8088457 80.00 88.00 4.00 5.00 7.00
WDM 2533457 25.00 33.00 4.00 5.00 7.00 WDM 8593457 85.00 93.00 4.00 5.00 7.00
WDM 2836457 28.00 36.00 4.00 5.00 7.00 WDM 9098457 90.00 98.00 4.00 5.00 7.00
WDM 3038457 30.00 38.00 4.00 5.00 7.00 WDM 100108457 100.00 108.00 4.00 5.00 7.00
WDM 3240457 32.00 40.00 4.00 5.00 7.00 WDM 110122457 110.00 122.00 4.00 5.00 7.00
WDM 3543457 35.00 43.00 4.00 5.00 7.00 WDM 11012255710 110.00 122.00 5.50 7.00 10.00
WDM 3644457 36.00 44.00 4.00 5.00 7.00 WDM 11512755710 115.00 127.00 5.50 7.00 10.00
WDM 4048457 40.00 48.00 4.00 5.00 7.00 WDM 125137457 125.00 137.00 4.00 5.00 7.00
WDM 4250457 42.00 50.00 4.00 5.00 7.00 WDM 12513755710 125.00 137.00 5.50 7.00 10.00
WDM 4452457 44.00 52.00 4.00 5.00 7.00 WDM 14015255710 140.00 152.00 5.50 7.00 10.00
WDM 4553457 45.00 53.00 4.00 5.00 7.00 WDM 160172457 160.00 172.00 4.00 5.00 7.00
WDM 4856457 48.00 56.00 4.00 5.00 7.00 WDM 16017255710 160.00 172.00 5.50 7.00 10.00
WDM 5058457 50.00 58.00 4.00 5.00 7.00 WDM 16517755710 165.00 177.00 5.50 7.00 10.00
WDM 5563457 55.00 63.00 4.00 5.00 7.00 WDM 18019255710 180.00 192.00 5.50 7.00 10.00
WDM 5664457 56.00 64.00 4.00 5.00 7.00 WDM 5664457 56.00 64.00 4.00 5.00 7.00
Additional sizes and styles are available upon request.
204 HITECHSEALS.COM
Metric Seals Wipers
C
H-Style
Wipers
Wipers
A B
WHM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. C H
Our standard material for a H-Style wiper is urethane.
A B C H A B C H
WHM 12206688 12.00 20.00 6.60 8.80 WHM 505857 50.00 58.00 5.00 7.00
WHM 182657 18.00 26.00 5.00 7.00 WHM 556357 55.00 63.00 5.00 7.00
WHM 1929565 19.00 29.00 5.00 6.50 WHM 56665585 56.00 66.00 5.50 8.50
WHM 2026364 20.00 26.00 3.60 4.00 WHM 606857 60.00 68.00 5.00 7.00
WHM 202645 20.00 26.00 4.00 5.00 WHM 637157 63.00 71.00 5.00 7.00
WHM 2028456 20.00 28.00 4.50 6.00 WHM 657357 65.00 73.00 5.00 7.00
WHM 2230456 22.00 30.00 4.50 6.00 WHM 708068 70.00 80.00 6.00 8.00
WHM 223057 22.00 30.00 5.00 7.00 WHM 758568 75.00 85.00 6.00 8.00
WHM 2533456 25.00 33.00 4.50 6.00 WHM 859568 85.00 95.00 6.00 8.00
WHM 3038565 30.00 38.00 5.00 6.50 WHM 9510568 95.00 105.00 6.00 8.00
WHM 3240565 32.00 40.00 5.00 6.50 WHM 10011068 100.00 110.00 6.00 8.00
WHM 3543565 35.00 43.00 5.00 6.50 WHM 132145795 132.00 145.00 7.00 9.50
WHM 3644565 36.00 44.00 5.00 6.50 WHM 2002201018 200.00 220.00 10.00 18.00
WHM 384657 38.00 46.00 5.00 7.00 WHM 2202401018 220.00 240.00 10.00 18.00
WHM 404857 40.00 48.00 5.00 7.00 WHM 3003201013 300.00 320.00 10.00 13.00
WHM 4050565 40.00 50.00 5.00 6.50 WHM 333601827 330.00 360.00 18.00 27.00
WHM 455357 45.00 53.00 5.00 7.00
HITECHSEALS.COM 205
Wipers Metric Seals
Stepped H-Style C2
0.635 R Max.
C1
H
Wipers
Wipers
B A
WHM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. C1 C2 H
Our standard material for a Stepped H-Style wipers is urethane.
A B C1 C2 H A B C1 C2 H
Part Number Dia. Dia. Widths Height Part Number Dia. Dia. Widths Height
WHM 1018468 10.00 18.00 4.00 6.00 8.00 WHM 6371468 63.00 71.00 4.00 6.00 8.00
WHM 1220468 12.00 20.00 4.00 6.00 8.00 WHM 6573468 65.00 73.00 4.00 6.00 8.00
WHM 1220468 12.00 20.00 4.00 6.00 8.00 WHM 7078468 70.00 78.00 4.00 6.00 8.00
WHM 1422468 14.00 22.00 4.00 6.00 8.00 WHM 7583468 75.00 83.00 4.00 6.00 8.00
WHM 1523468 15.00 23.00 4.00 6.00 8.00 WHM 8088468 80.00 88.00 4.00 6.00 8.00
WHM 1624468 16.00 24.00 4.00 6.00 8.00 WHM 8593468 85.00 93.00 4.00 6.00 8.00
WHM 1826468 18.00 26.00 4.00 6.00 8.00 WHM 9098468 90.00 98.00 4.00 6.00 8.00
WHM 2028468 20.00 28.00 4.00 6.00 8.00 WHM 100108468 100.00 108.00 4.00 6.00 8.00
WHM 2230468 22.00 30.00 4.00 6.00 8.00 WHM 105117558211 105.00 117.00 5.50 8.20 11.00
WHM 2533468 25.00 33.00 4.00 6.00 8.00 WHM 110122558211 110.00 122.00 5.50 8.20 11.00
WHM 2836468 28.00 36.00 4.00 6.00 8.00 WHM 115127558211 115.00 127.00 5.50 8.20 11.00
WHM 3038468 30.00 38.00 4.00 6.00 8.00 WHM 120132558211 120.00 132.00 5.50 8.20 11.00
WHM 3240468 32.00 40.00 4.00 6.00 8.00 WHM 125137558211 125.00 137.00 5.50 8.20 11.00
WHM 3543468 35.00 43.00 4.00 6.00 8.00 WHM 130142558211 130.00 142.00 5.50 8.20 11.00
WHM 3644468 36.00 44.00 4.00 6.00 8.00 WHM 135147558211 135.00 147.00 5.50 8.20 11.00
WHM 4048468 40.00 48.00 4.00 6.00 8.00 WHM 140152558211 140.00 152.00 5.50 8.20 11.00
WHM 4250468 42.00 50.00 4.00 6.00 8.00 WHM 150162558211 150.00 162.00 5.50 8.20 11.00
WHM 4553468 45.00 53.00 4.00 6.00 8.00 WHM 160172558211 160.00 172.00 5.50 8.20 11.00
WHM 5058468 50.00 58.00 4.00 6.00 8.00 WHM 170182558211 170.00 182.00 5.50 8.20 11.00
WHM 5563468 55.00 63.00 4.00 6.00 8.00 WHM 180192558211 180.00 192.00 5.50 8.20 11.00
WHM 5664468 56.00 64.00 4.00 6.00 8.00 WHM 200212558211 200.00 212.00 5.50 8.20 11.00
WHM 6068468 60.00 68.00 4.00 6.00 8.00
206 HITECHSEALS.COM
Metric Seals Wipers
C
0.635 R Max. Metal Encased
H2
H1
Primary Design
A B
Wipers
Wipers
20-30°
Interchangable Design
WCM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. C H
Our standard materials of a metal clad wiper are a nitrile sealing
element with a steel case.
A B C H1 H2 A B C H1 H2
Number Dia. Dia. Width Seal Heights Number Dia. Dia. Width Seal Heights
WCM 1016345 10.00 16.00 3.50 3.00 4.50 WCM 2840710 28.00 40.00 7.50 7.00 10.00
WCM 102058 10.00 20.00 5.50 5.00 8.00 WCM 3040710 30.00 40.00 7.50 7.00 10.00
WCM 122046 12.00 20.00 4.50 4.00 6.00 WCM 324047 32.00 40.00 4.50 4.00 7.00
WCM 1420355 14.00 20.00 4.00 3.50 5.00 WCM 324257 32.00 42.00 5.50 5.00 7.00
WCM 142234 14.00 22.00 3.50 3.00 4.00 WCM 3242710 32.00 42.00 7.50 7.00 10.00
WCM 152558 15.00 25.00 5.050 5.00 8.00 WCM 3245710 32.00 45.00 7.50 7.00 10.00
WCM 162234 16.00 22.00 3.50 3.00 4.00 WCM 3545710 35.00 45.00 7.50 7.00 10.00
WCM162658 16.00 26.00 5.50 5.00 8.00 WCM 3547710 35.00 47.00 750 7.00 10.00
WCM 1826710 18.00 26.00 7.50 7.00 10.00 WCM 3646710 36.00 46.00 7.50 7.00 10.00
WCM 182857 18.00 28.00 5.50 5.00 7.00 WCM 3848710 38.00 48.00 7.50 7.00 10.00
WCM 1828710 18.00 28.00 7.50 7.00 10.00 WCM 4050710 40.00 50.00 7.50 7.00 10.00
WCM 203046 20.00 30.00 4.50 4.00 6.00 WCM 4252710 42.00 52.00 7.50 7.00 10.00
WCM 203058 20.00 30.00 5.50 5.00 8.00 WCM 4555710 45.00 55.00 7.50 7.00 10.00
WCM 2030710 20.00 30.00 7.50 7.00 10.00 WCM 4560710 45.00 60.00 750 7.00 10.00
WCM 222859 22.00 28.00 5.50 5.00 9.00 WCM 4860710 48.00 60.00 7.50 7.00 10.00
WCM 223257 22.00 32.00 5.50 5.00 7.00 WCM 5060710 50.00 60.00 7.50 7.00 10.00
WCM 2232710 22.00 32.00 7.50 7.00 10.00 WCM 5262710 52.00 62.00 7.50 7.00 10.00
WCM 233358 23.00 33.00 5.50 5.00 8.00 WCM 5565710 55.00 65.00 7.50 7.00 10.00
WCM 243257 24.00 32.00 5.50 5.00 7.00 WCM 5666710 56.00 66.00 750 7.00 10.00
WCM 2535710 25.00 35.00 7.50 7.00 10.00 WCM 6070710 60.00 70.00 7.50 7.00 10.00
WCM 2838710 28.00 38.00 7.50 7.00 10.00 WCM 6375710 63.00 75.00 7.50 7.00 10.00
HITECHSEALS.COM 207
Wipers Metric Seals
Metal Encased
Wipers
Wipers
A B C H1 H2 A B C H1 H2
Number Dia. Dia. Width Seal Heights Number Dia. Dia. Width Seal Heights
WCM 6575710 65.00 75.00 7.50 7.00 10.00 WCM 135150912 135.00 150.00 9.50 9.00 12.00
WCM 6783710 67.00 83.00 7.50 7.00 10.00 WCM 140155912 140.00 155.00 9.50 9.00 12.00
WCM 7080710 70.00 80.00 7.50 7.00 10.00 WCM 150165912 150.00 165.00 9.50 9.00 12.00
WCM 7282710 72.00 82.00 7.50 7.00 10.00 WCM 160175912 160.00 175.00 9.50 9.00 12.00
WCM 7585710 75.00 85.00 7.50 7.00 10.00 WCM 170185912 170.00 185.00 9.50 9.00 12.00
WCM 7888710 78.00 88.00 7.50 7.00 10.00 WCM 1801951014 180.00 195.00 10.50 10.00 14.00
WCM 8088710 80.00 88.00 7.50 7.00 10.00 WCM 1852001014 185.00 200.00 10.50 10.00 14.00
WCM 8090710 80.00 90.00 7.50 7.00 10.00 WCM 2002201216 200.00 220.00 12.50 12.00 16.00
WCM 8292710 82.00 92.00 7.50 7.00 10.00 WCM 2102301216 210.00 230.00 12.50 12.00 16.00
WCM 8595710 85.00 95.00 7.50 7.00 10.00 WCM 2202401216 220.00 240.00 12.50 12.00 16.00
WCM 90100710 90.00 100.00 7.50 7.00 10.00 WCM 2402601216 240.00 260.00 12.50 12.00 16.00
WCM 95105710 95.00 105.00 7.50 7.00 10.00 WCM 2502701216 250.00 270.00 12.50 12.00 16.00
WCM 100110710 100.00 110.00 7.50 7.00 10.00 WCM 2702951216 270.00 295.00 12.50 12.00 16.00
WCM105115710 105.00 115.00 7.50 7.00 10.00 WCM 2803001216 280.00 300.00 12.50 12.00 16.00
WCM 110120710 110.00 120.00 7.50 7.00 10.00 WCM 3103401622 310.00 340.00 16.50 16.00 22.00
WCM 115125710 115.00 125.00 7.50 7.00 10.00 WCM 3203401216 320.00 340.00 12.50 12.00 16.00
WCM 120130710 120.00 130.00 7.50 7.00 10.00 WCM 3603801216 360.00 380.00 12.50 12.00 16.00
WCM 125140912 125.00 140.00 9.50 9.00 12.00 WCM 3904201622 390.00 420.00 16.50 16.00 22.00
WCM 130145912 130.00 145.00 9.50 9.00 12.00 WCM 4004201216 400.00 420.00 12.50 12.00 16.00
208 HITECHSEALS.COM
Metric Seals Wipers
C
0.635 R Max. Metal Encased Pin Eye
A B
Wipers
Wipers
20-30°
WCM - ___ ___ ___ ___ ___ ___ ___ ___ PE
I.D. O.D. Height Our standard materials for a metal clad pin eye wiper are a urethane
sealing element with a steel case.
A B C A B C
Part Number Dia. Dia. Width Part Number Dia. Dia. Width
WCM 15215PE 15.00 21.00 5.00 WCM 85957PE 85.00 95.00 7.00
WCM 16235PE 16.00 23.00 5.00 WCM 901007PE 90.00 100.00 7.00
WCM 20285PE 20.00 28.00 5.00 WCM 901056PE 90.00 105.00 6.00
WCM 25327PE 25.00 32.00 7.00 WCM 901058PE 90.00 105.00 8.00
WCM 36467PE 36.00 46.00 7.00 WCM 901107PE 90.00 110.00 7.00
WCM 45554PE 45.00 55.00 4.00 WCM 901108PE 90.00 110.00 8.00
WCM 50607PE 50.00 60.00 7.00 WCM 951108PE 95.00 110.00 8.00
WCM 65757PE 65.00 75.00 7.00 WCM 1001107PE 100.00 110.00 7.00
WCM 65806PE 65.00 80.00 6.00 WCM1001154PE 100.00 115.00 4.00
WCM 65808PE 65.00 80.00 8.00 WCM1001157PE 100.00 115.00 7.00
WCM 70807PE 70.00 80.00 7.00 WCM1001159PE 100.00 115.00 9.00
WCM 70855PE 70.00 85.00 5.00 WCM1001208PE 100.00 120.00 8.00
WCM 70857PE 70.00 85.00 7.00 WCM1101207PE 110.00 120.00 7.00
WCM 70858PE 70.00 85.00 8.00 WCM1101254PE 110.00 125.00 4.00
WCM 71865PE 71.00 86.00 5.00 WCM1101258PE 110.00 125.00 8.00
WCM 75898PE 75.00 89.00 8.00 WCM11016010PE 110.00 160.00 10.00
WCM 80907PE 80.00 90.00 7.00 WCM 1201307PE 120.00 130.00 7.00
WCM 80954PE 80.00 95.00 4.00 WCM 1201357PE 120.00 135.00 7.00
WCM 80955PE 80.00 95.00 5.00 WCM 1201358PE 120.00 135.00 8.00
WCM 80957PE 80.00 95.00 7.00 WCM 1201408PE 120.00 140.00 8.00
WCM 85955PE 85.00 95.00 5.00 WCM 14016010PE 140.00 160.00 10.00
www.hitechseals.comHITECHSEALS.COM 209 209

Homogenous U-Cups Metric Seals

Homogenous U-Cups
U-Cups

Homogenous
Product Description
Homogenous U-cups (HU) also known as block Vees, are non-loaded, U-cups. HU Seals are popular in low pressure appli-
cations where a low friction seal would be beneficial. They are most commonly used in pneumatic applications as a rod or
piston seal. The design is suited for situations where space is limited. HU seals are typically made from an 80 durometer
nitrile, but is also available fluorocarbon, chloroprene, and other homogenous materials.
As pressure is applied to the HU, the seal experiences an increase in sealing force until it reaches the maximum pressure the
seal can handle. HU seals can withstand up to 500 PSI.
Part Numbers:
M ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height

HU - Nitrile
UV - Viton™/Fluorocarbon
Example: MHU 22305 - Homogenous U-Cup, Nitrile, 22.00 mm I.D. 30.00 mm O.D. 5.00 mm Height
210 HITECHSEALS.COM
Metric Seals Homogenous U-Cups
C
Homogenous
C
Homogenous U-Cups
B A
A B
U-Cups
Additional sizes and materials are available upon request.
A B C A B C
Shaft/Piston Bore/Shaft Groove Shaft/Piston Bore/Shaft Groove
Part Number Groove Dia. Groove Dia. Width Part Number Groove Dia. Groove Dia. Width
MHU 4104 4.00 10.00 4.00 MHU 20284 20.00 28.00 4.00
MHU 4124 4.00 12.00 4.00 MHU 20308 20.00 30.00 8.00
MHU 5125 5.00 12.00 5.00 MHU 203510 20.00 35.00 10.00
MHU 6124 6.00 12.00 4.00 MHU 22305 22.00 30.00 5.00
MHU 6126 6.00 12.00 6.00 MHU 22306 22.00 30.00 6.00
MHU 6155 6.00 15.00 5.00 MHU 233255 23.00 32.00 5.50
MHU 7134 7.00 13.00 4.00 MHU 243255 24.00 32.00 5.50
MHU 8166 8.00 16.00 6.00 MHU 253351 25.00 33.00 5.10
MHU 1013623 10.00 13.60 2.30 MHU 25338 25.00 33.00 8.00
MHU 10164 10.00 16.00 4.00 MHU 25358 25.00 35.00 8.00
MHU 10188 10.00 18.00 8.00 MHU 25388 25.00 38.00 8.00
MHU 10205 10.00 20.00 5.00 MHU 25406 25.00 40.00 6.00
MHU 10208 10.00 20.00 8.00 MHU 254010 25.00 40.00 10.00
MHU 12184 12.00 18.00 4.00 MHU 284310 28.00 43.00 10.00
MHU 12185 12.00 18.00 5.00 MHU 30386 30.00 38.00 6.00
MHU 14205 14.00 20.00 5.00 MHU 30407 30.00 40.00 7.00
MHU 14226 14.00 22.00 6.00 MHU 305512 30.00 55.00 12.00
MHU 15224 15.00 22.00 4.00 MHU 355010 35.00 50.00 10.00
MHU 153010 15.00 30.00 10.00 MHU 36486 36.00 48.00 6.00
MHU 16245 16.00 24.00 5.00 MHU 40505 40.00 50.00 5.00
MHU 162455 16.00 24.00 5.50 MHU 40507 40.00 50.00 7.00
MHU 162465 16.00 24.00 6.50 MHU 40509 40.00 50.00 9.00
MHU 16268 16.00 26.00 8.00 MHU 40528 40.00 52.00 8.00
MHU 18244 18.00 24.00 4.00 MHU 405510 40.00 55.00 10.00
MHU 18306 18.00 30.00 6.00 MHU 406012 40.00 60.00 12.00
HITECHSEALS.COM 211
Homogenous U-Cups Metric Seals
Homogenous U-Cups
Homogenous U-Cups
A B C A B C
Shaft/Piston Bore/Rod Groove Shaft/Piston Bore/Rod Groove
MHU 42506 42.00 50.00 6.00 MHU 851009 85.00 100.00 9.00
MHU 456010 45.00 60.00 10.00 MHU 8511012 85.00 110.00 12.00
MHU 507010 50.00 70.00 10.00 MHU 9011512 90.00 115.00 12.00
MHU 507012 50.00 70.00 12.00 MHU 951109 95.00 110.00 9.00
MHU 53636 53.00 63.00 6.00 MHU 971058 97.00 105.00 8.00
MHU 557075 55.00 70.00 7.50 MHU 10012012 100.00 120.00 12.00
MHU 60738 60.00 73.00 8.00 MHU 11013518 110.00 135.00 18.00
MHU 607575 60.00 75.00 7.50 MHU 12015018 120.00 150.00 18.00
MHU 65756 65.00 75.00 6.00 MHU 155170115 155.00 170.00 11.50
MHU 70806 70.00 80.00 6.00 MHU 17520515 175.00 205.00 15.00
MHU 759510 75.00 95.00 10.00 MHU 18021022 180.00 210.00 22.00
MHU 759512 75.00 95.00 12.00 MHU 18520011 185.00 200.00 11.00
MHU 7510515 75.00 105.00 15.00 MHU 20022015 200.00 220.00 15.00
MHU 80905 80.00 90.00 5.00 MHU 20023022 200.00 230.00 22.00
MHU 8010012 80.00 100.00 12.00 MHU 24028020 240.00 280.00 20.00
MHU 8010015 80.00 100.00 15.00 MHU 30033022 300.00 330.00 22.00
MHU 8010515 80.00 105.00 15.00 MHU 58062020 580.00 620.00 20.00
MHU 821009 82.00 100.00 9.00
Fluorocarbon
A B C A B C
Shaft/Piston Bore/Rod Groove Shaft/Piston Bore/Rod Groove
MUV 141845 14.00 18.00 4.50 MUV 607610 60.00 76.00 10.00
MUV 15258 15.00 25.00 8.00 MUV 709012 70.00 90.00 12.00
MUV 253357 25.00 33.00 5.70 MUV 85979 85.00 97.00 9.00
MUV 404857 40.00 48.00 5.70 MUV 9011012 90.00 110.00 12.00
MUV 40486 40.00 48.00 6.00 MUV 11012510 110.00 125.00 10.00
MUV 40507 40.00 50.00 7.00 MUV 11012512 110.00 125.00 12.00
MUV 425034 42.00 50.00 3.40 MUV 13516015 135.00 160.00 15.00
MUV 455510 45.00 55.00 10.00 MUV 16018015 160.00 180.00 15.00
MUV 506010 50.00 60.00 10.00 MUV 250280173 250.00 280.00 17.30
MUV 56666 56.00 66.00 6.00
212 HITECHSEALS.COM
Metric Seals DPP Seal
DPP
DPP Seal
Seal
Product Description
Double acting pneumatic piston seals (DPP) are suited for low pressure value applications. The DPP seal is designed for
surface speeds less than or equal to 1.0 meters per second and less than 12 bars of pressure.
Part Numbers:
DPP - __ __ __ K54 __
O.D. Blank - Nitrile

V - Viton™/Fluorocarbon
Example: DPP 020 K 54 V - DPP Seal, Fluorocarbon, 13.0 mm I.D., 20.0 mm O.D., 2.1 mm Height
HITECHSEALS.COM 213
DPP Seal Metric Seals
C
H
Seal
DPP Seal
DPP
O.D. I.D. D
Seal Dimensions C D
Part Number I.D. O.D. H Groove Width Piston Diameter
DPP 012K54 7.00 12.00 2.00 2.50 11.60
DPP 016K54 9.00 16.00 2.10 2.50 15.60
DPP 020K54 13.00 20.00 2.10 2.50 19.60
DPP 025K54 18.00 25.00 2.10 2.50 24.60
DPP 028K54 19.00 28.00 2.50 3.00 27.60
DPP 030K54 21.00 30.00 2.50 3.00 29.60
DPP 032K54 23.00 32.00 2.50 3.00 31.60
DPP 035K54 26.00 35.00 2.50 3.00 34.50
DPP 040K54 31.00 40.00 2.50 3.00 39.50
DPP 045K54 36.00 45.00 2.50 3.00 44.50
DPP 050K54 41.00 50.00 2.50 3.00 49.50
DPP 063K54 51.00 63.00 3.40 4.00 62.50
DPP 080K54 68.00 80.00 3.40 4.00 79.50
DPP 100K54 88.00 100.00 3.40 4.00 99.40
DPP 125K54 110.00 125.00 4.40 5.00 124.40
214 HITECHSEALS.COM
Metric Seals Urethane U-Cups
Seal Material Temp. Range
Urethane U-Cups
Loader Materials
Symmetrical Symmetrical Loaded Rod (MRO) Rod Double Lip

(MSY) (MSY - P) (MRO - BH)
Piston (MPI) Piston w/ Anti-

Extrusion (MPI - UE)
Product Description
Urethane U-cups are designed to provide an excellent heavy duty seal for both piston and rod applications. They work well in
both static and dynamic applications. Symmetrical, rod, and piston styles are available in a range of sizes. Non-symmetrical
urethane U-cups provide customers with additional benefits including reduced seal movement, added stability in static
applications, and protection of the dynamic lip during installation. Rod styles provide improved sealability on the I.D., while
the piston style provides improved sealability on the O.D.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height Style Suffix:

MSY - Symmetrical Blank - Standard, Unloaded U-Cup
MRO - Rod P - Loaded U-Cup
MPI - Piston BH - Bump heel (Double Lip)
UE - Piston Seal w/Anti-Extrusion ring
Example: MSY 10 16 4 - Symmetrical U-Cup., 10.00 mm I.D., 16.00 mm O.D., 4.00 mm Height
HITECHSEALS.COM 215
215
Urethane U-Cups Metric Seals
Symmetrical Style
C C
Urethane U-Cups
B A B A
A B C A B C
Groove Groove Groove Groove Groove Groove
Part Number Diameter Diameter Width Part Number Diameter Diameter Width
MSY 4104 4.00 10.00 4.00 MSY152810 15.00 28.00 10.00
MSY 41045 4.00 10.00 4.50 MSY16225 16.00 22.00 5.00
MSY 51255 5.00 12.00 5.50 MSY 16245P 16.00 24.00 5.00
MSY 6124 6.00 12.00 4.00 MSY 162465 16.00 24.00 6.50
MSY 6126 6.00 12.00 6.00 MSY 16249 16.00 24.00 9.00
MSY 6158 6.00 15.00 8.00 MSY 16267 16.00 26.00 7.00
MSY 71435 7.00 14.00 3.50 MSY 16268 16.00 26.00 8.00
MSY 8158 8.00 15.00 8.00 MSY 172510 17.00 25.00 10.00
MSY 8168 8.00 16.00 8.00 MSY 182445 18.00 24.00 4.50
MSY 8188 8.00 18.00 8.00 MSY 18245 18.00 24.00 5.00
MSY10164 10.00 16.00 4.00 MSY 182546P 18.00 25.00 4.60
MSY 101645 10.00 16.00 4.50 MSY 18255 18.00 25.00 5.00
MSY 101653 10.00 16.00 5.30 MSY 18265P 18.00 26.00 5.00
MSY 10166 10.00 16.00 6.00 MSY 18266 18.00 26.00 6.00
MSY 101855 10.00 18.00 5.50 MSY 18268 18.00 26.00 8.00
MSY 10186 10.00 18.00 6.00 MSY 18288 18.00 28.00 8.00
MSY 10208 10.00 20.00 8.00 MSY 18306 18.00 30.00 6.00
MSY 12186 12.00 18.00 6.00 MSY 18308 18.00 30.00 8.00
MSY 122057 12.00 20.00 5.70 MSY 18348 18.00 34.00 8.00
MSY 12208 12.00 20.00 8.00 MSY 19253 19.00 25.00 3.00
MSY 12228 12.00 22.00 8.00 MSY 20265 20.00 26.00 5.00
MSY 122510 12.00 25.00 10.00 MSY 20284 20.00 28.00 4.00
MSY 1252055 12.50 20.50 5.00 MSY 20285P 20.00 28.00 5.00
MSY 13184 13.00 18.00 4.00 MSY 202857P 20.00 28.00 5.70
MSY 142048 14.00 20.00 4.80 MSY 20288 20.00 28.00 8.00
MSY 14224 14.00 22.00 4.00 MSY 20307 20.00 30.00 7.00
MSY 14226 14.00 22.00 6.00 MSY 20308 20.00 30.00 8.00
MSY 14248P 14.00 24.00 8.00 MSY 20308P 20.00 30.00 8.00
MSY 142810 14.00 28.00 10.00 MSY 203010 20.00 30.00 10.00
MSY 15257 15.00 25.00 7.00 MSY 203275 20.00 32.00 7.50
MSY15258 15.00 25.00 8.00 MSY 20328 20.00 32.00 8.00
216 HITECHSEALS.COM
Symmetrical Style
Urethane
A B C A B C
Urethane U-Cups
MSY 203512 20.00 35.00 12.00 MSY 304010P 30.00 40.00 10.00
MSY 204010 20.00 40.00 10.00 MSY 30429 30.00 42.00 9.00
MSY 22288 22.00 28.00 8.00 MSY 304210 30.00 42.00 10.00
U-Cups
MSY 22305 22.00 30.00 5.00 MSY 304210P 30.00 42.00 10.00
MSY 223057P 22.00 30.00 5.70 MSY 30458P 30.00 45.00 8.00
MSY 22306 22.00 30.00 6.00 MSY 304510 30.00 45.00 10.00
MSY 22307 22.00 30.00 7.00 MSY 304510P 30.00 45.00 10.00
MSY 22327 22.00 32.00 7.00 MSY 304610 30.00 46.00 10.00
MSY 22328 22.00 32.00 8.00 MSY 305010 30.00 50.00 10.00
MSY 223210 22.00 32.00 10.00 MSY 305012 30.00 50.00 12.00
MSY 22346 22.00 34.00 6.00 MSY 324057P 32.00 40.00 5.70
MSY 224010 22.00 40.00 10.00 MSY 32406 32.00 40.00 6.00
MSY 224012 22.00 40.00 12.00 MSY 324075P 32.00 40.00 7.50
MSY 224305 22.00 43.00 5.00 MSY 32408 32.00 40.00 8.00
MSY 223510 22.40 30.00 10.00 MSY 324210P 32.00 42.00 10.00
MSY 243257 24.00 32.00 5.70 MSY 324510 32.00 45.00 10.00
MSY 24408 24.00 40.00 8.00 MSY 324810P 32.00 48.00 10.00
MSY 25335 25.00 33.00 5.00 MSY 325010 32.00 50.00 10.00
MSY 253357P 25.00 33.00 5.70 MSY 334310 33.00 43.00 10.00
MSY 25338 25.00 33.00 8.00 MSY 354357 35.00 43.00 5.70
MSY 25338P 25.00 33.00 8.00 MSY 354363 35.00 43.00 6.30
MSY 253565 25.00 35.00 6.50 MSY 35438 35.00 43.00 8.00
MSY 25358 25.00 35.00 8.00 MSY 35456 35.00 45.00 6.00
MSY 25358P 25.00 35.00 8.00 MSY 354510 35.00 45.00 10.00
MSY 253510P 25.00 35.00 10.00 MSY 354510P 35.00 45.00 10.00
MSY 253810 25.00 38.00 10.00 MSY 354810 35.00 48.00 10.00
MSY 254010 25.00 40.00 10.00 MSY 355010 35.00 50.00 10.00
MSY 254010P 25.00 40.00 10.00 MSY 355010P 35.00 50.00 10.00
MSY 264712 26.00 47.00 12.00 MSY 36448P 36.00 44.00 8.00
MSY 283555P 28.00 35.50 5.00 MSY 36467 36.00 46.00 7.00
MSY 28364 28.00 36.00 4.00 MSY 365110 36.00 51.00 10.00
MSY 283655 28.00 36.00 5.50 MSY 38455 38.00 45.00 5.00
MSY 28368P 28.00 36.00 8.00 MSY 38509 38.00 50.00 9.00
MSY 283873P 28.00 38.00 7.30 MSY 385010 38.00 50.00 10.00
MSY 28388 28.00 38.00 8.00 MSY 385510 38.00 55.00 10.00
MSY 28409 28.00 40.00 9.00 MSY 40486P 40.00 48.00 6.00
MSY 284010 28.00 40.00 10.00 MSY 404811 40.00 48.00 11.00
MSY 303857 30.00 38.00 5.70 MSY 40505 40.00 50.00 5.00
MSY 303863P 30.00 38.00 6.30 MSY 40506 40.00 50.00 6.00
MSY 30388 30.00 38.00 8.00 MSY 40506P 40.00 50.00 6.00
MSY 30405 30.00 40.00 5.00 MSY 40507 40.00 50.00 7.00
MSY 30406P 30.00 40.00 6.00 MSY 405075 40.00 50.00 7.50
MSY 304010 30.00 40.00 10.00 MSY 40508 40.00 50.00 8.00
HITECHSEALS.COM 217
Symmetrical Style
A B C A B C
Urethane U-Cups
U-Cups
MSY 40508P 40.00 50.00 8.00 MSY 507012 50.00 70.00 12.00
MSY 405010 40.00 50.00 10.00 MSY 507012P 50.00 70.00 12.00
MSY 405010P 40.00 50.00 10.00 MSY 53636 53.00 63.00 6.00
MSY 405510 40.00 55.00 10.00 MSY 55638 55.00 63.00 8.00
Urethane
MSY 405510P 40.00 55.00 10.00 MSY 55656P 55.00 65.00 6.00
MSY 40608 40.00 60.00 8.00 MSY 556510P 55.00 65.00 10.00
MSY 406010P 40.00 60.00 10.00 MSY 556512 55.00 65.00 12.00
MSY 406012 40.00 60.00 12.00 MSY 557012 55.00 70.00 12.00
MSY 406012P 40.00 60.00 12.00 MSY 557012P 55.00 70.00 12.00
MSY 406018 40.00 60.00 18.00 MSY 557512 55.00 75.00 12.00
MSY 425065P 42.00 50.00 6.50 MSY 5671114 56.00 71.00 11.40
MSY 42557 42.00 55.00 7.00 MSY 60688P 60.00 68.00 8.00
MSY 42557P 42.00 55.00 7.00 MSY 60706P 60.00 70.00 6.00
MSY 426212 42.00 62.00 12.00 MSY 60708P 60.00 70.00 8.00
MSY 45538 45.00 53.00 8.00 MSY 607010 60.00 70.00 10.00
MSY 45556P 45.00 55.00 6.00 MSY 607012 60.00 70.00 12.00
MSY 455565 45.00 55.00 6.50 MSY 607012P 60.00 70.00 12.00
MSY 455573 45.00 55.00 7.30 MSY 60725 60.00 72.00 5.00
MSY 455510 45.00 55.00 10.00 MSY 60729 60.00 72.00 9.00
MSY 455510P 45.00 55.00 10.00 MSY 607511P 60.00 75.00 11.00
MSY 45585 45.00 58.00 5.00 MSY 607512 60.00 75.00 12.00
MSY 456010 45.00 60.00 10.00 MSY 608012 60.00 80.00 12.00
MSY 456010P 45.00 60.00 10.00 MSY 608012P 60.00 80.00 12.00
MSY 456510 45.00 65.00 10.00 MSY 6080145P 60.00 80.00 14.50
MSY 456512 45.00 65.00 12.00 MSY 608018 60.00 80.00 18.00
MSY 456512P 45.00 65.00 12.00 MSY 61716 61.00 71.00 6.00
MSY 485810 48.00 58.00 10.00 MSY 637312P 63.00 73.00 12.00
MSY 48609 48.00 60.00 9.00 MSY 637510 63.00 75.00 10.00
MSY 486310 48.00 63.00 10.00 MSY 637810 63.00 78.00 10.00
MSY 486312 48.00 63.00 12.00 MSY 6378106 63.00 78.00 10.60
MSY 50588 50.00 58.00 8.00 MSY 638315 63.00 83.00 15.00
MSY 50606 50.00 60.00 6.00 MSY 638315P 63.00 83.00 15.00
MSY 50606P 50.00 60.00 6.00 MSY 65738 65.00 73.00 8.00
MSY 506073P 50.00 60.00 7.30 MSY 65756 65.00 75.00 6.00
MSY 506010 50.00 60.00 10.00 MSY 657512 65.00 75.00 12.00
MSY 506010P 50.00 60.00 10.00 MSY 65809 65.00 80.00 9.00
MSY 506012 50.00 60.00 12.00 MSY 658010 65.00 80.00 10.00
MSY 506012P 50.00 60.00 12.00 MSY 658012 65.00 80.00 12.00
MSY 50636 50.00 63.00 6.00 MSY 658012P 65.00 80.00 12.00
MSY506510 50.00 65.00 10.00 MSY 658512 65.00 85.00 12.00
MSY 506510P 50.00 65.00 10.00 MSY 658512P 65.00 85.00 12.00
MSY 5065114 50.00 65.00 11.40 MSY 659015P 65.00 90.00 15.00
MSY 507010 50.00 70.00 10.00 MSY 67776 67.00 77.00 6.00
MSY 507010P 50.00 70.00 10.00 MSY 70806P 70.00 80.00 6.00
218 HITECHSEALS.COM
Symmetrical Style
A B C A B C
Urethane
Urethane U-Cups
MSY 708012 70.00 80.00 12.00 MSY 9510512 95.00 105.00 12.00
MSY 708012P 70.00 80.00 12.00 MSY 951109P 95.00 110.00 9.00
MSY 708210 70.00 82.00 10.00 MSY 9511012 95.00 110.00 12.00
MSY 7083114P 70.00 83.00 11.40 MSY 9511512 95.00 115.00 12.00
MSY 7085114P 70.00 85.00 11.40 MSY 10010812P 100.00 108.00 12.00
U-Cups
MSY 708512 70.00 85.00 12.00 MSY 1001108 100.00 110.00 8.00
MSY 709010P 70.00 90.00 10.00 MSY 10011510P 100.00 115.00 10.00
MSY 709012 70.00 90.00 12.00 MSY 10011512 100.00 115.00 12.00
MSY 709012P 70.00 90.00 12.00 MSY 100120114 100.00 120.00 11.40
MSY 709018 70.00 90.00 18.00 MSY 10012012 100.00 120.00 12.00
MSY 71806 71.00 80.00 6.00 MSY 10012012P 100.00 120.00 12.00
MSY 75856 75.00 85.00 6.00 MSY 10012512 100.00 125.00 12.00
MSY 75858 75.00 85.00 8.00 MSY 100125124P 100.00 125.00 12.40
MSY 758512 75.00 85.00 12.00 MSY 10012515 100.00 125.00 15.00
MSY 758512P 75.00 85.00 12.00 MSY 10013015 100.00 130.00 15.00
MSY 759011P 75.00 90.00 11.00 MSY 1051209P 105.00 120.00 9.00
MSY 759012 75.00 90.00 12.00 MSY 10512515 105.00 125.00 15.00
MSY 759512 75.00 95.00 12.00 MSY 10512515P 105.00 125.00 15.00
MSY 759512P 75.00 95.00 12.00 MSY 10513012 105.00 130.00 12.00
MSY 80888 80.00 88.00 8.00 MSY 1101259 110.00 125.00 9.00
MSY 80906P 80.00 90.00 6.00 MSY 11012512 110.00 125.00 12.00
MSY 80908P 80.00 90.00 8.00 MSY 11012515 110.00 125.00 15.00
MSY 809010 80.00 90.00 10.00 MSY 11013012P 110.00 130.00 12.00
MSY 809010P 80.00 90.00 10.00 MSY 110130145P 110.00 130.00 14.50
MSY 809012 80.00 90.00 12.00 MSY 11013015 110.00 130.00 15.00
MSY 809012P 80.00 90.00 12.00 MSY 1121259P 112.00 125.00 9.00
MSY 8095114P 80.00 95.00 11.40 MSY 11512514 115.00 125.00 14.00
MSY 809512 80.00 95.00 12.00 MSY 11512515 115.00 125.00 15.00
MSY 8010010P 80.00 100.00 10.00 MSY 1151309 115.00 130.00 9.00
MSY 8010012 80.00 100.00 12.00 MSY 11513515 115.00 135.00 15.00
MSY 8010012P 80.00 100.00 12.00 MSY 11514018 115.00 140.00 18.00
MSY 851009P 85.00 100.00 9.00 MSY 1201359 120.00 135.00 9.00
MSY 8510010 85.00 100.00 10.00 MSY 12014012P 120.00 140.00 12.00
MSY 8510010P 85.00 100.00 10.00 MSY 12014015 120.00 140.00 15.00
MSY 8510012 85.00 100.00 12.00 MSY 12014015P 120.00 140.00 15.00
MSY 8510012P 85.00 100.00 12.00 MSY 1221306P 122.00 130.00 6.00
MSY 8510512P 85.00 105.00 12.00 MSY 12514015 125.00 140.00 15.00
MSY 9010010 90.00 100.00 10.00 MSY 12514515 125.00 145.00 15.00
MSY9010012 90.00 100.00 12.00 MSY 12815015 128.00 150.00 15.00
MSY9010510P 90.00 105.00 10.00 MSY 13015015 130.00 150.00 15.00
MSY 9010512 90.00 105.00 12.00 MSY 13015715 130.00 157.00 15.00
MSY 9011012 90.00 110.00 12.00 MSY 1351509 135.00 150.00 9.00
MSY 9011012P 90.00 110.00 12.00 MSY 13515011 135.00 150.00 11.00
MSY 9011015 90.00 110.00 15.00 MSY 13515016 135.00 150.00 16.00
HITECHSEALS.COM 219
Symmetrical Style
A B C A B C
Urethane U-Cups
U-Cups

MSY 13515515 135.00 155.00 15.00 MSY18020012 180.00 200.00 12.00
MSY 13515515P 135.00 155.00 15.00 MSY18020015 180.00 200.00 15.00
MSY 13615085 136.00 150.00 8.50 MSY20022015 200.00 220.00 15.00
Urethane
MSY 14016012P 140.00 160.00 12.00 MSY20022015P 200.00 220.00 15.00

MSY 14016015 140.00 160.00 15.00 MSY20022515 200.00 225.00 15.00
MSY 14016015P 140.00 160.00 15.00 MSY22025018 220.00 250.00 18.00
MSY 1451609 145.00 160.00 9.00 MSY22025020P 220.00 250.00 20.00
MSY 150160135 150.00 160.00 13.50
MSY22525012 225.00 250.00 12.00
MSY 150170145P 150.00 170.00 14.50
MSY23025012 230.00 250.00 12.00
MSY 15017015 150.00 170.00 15.00
MSY24525514P 245.00 255.00 14.00
MSY 1601759 160.00 175.00 9.00
MSY25028022 250.00 280.00 22.00
MSY 16018015 160.00 180.00 15.00
MSY250280285 250.00 280.00 28.50
MSY 16018015P 160.00 180.00 15.00
MSY26528520 265.00 285.00 20.00
MSY 16019018 160.00 190.00 18.00
MSY 17018520 170.00 185.00 20.00 MSY285300115 285.00 300.00 11.50
MSY 17019015 170.00 190.00 15.00 MSY29532018 295.00 320.00 18.00
MSY 17020018 170.00 200.00 18.00 MSY32035020 320.00 350.00 20.00
MSY 17518579P 175.00 185.00 7.90 MSY33036020 330.00 360.00 20.00
MSY17520515 175.00 205.00 15.00 MSY41644012 416.00 440.00 12.00
220 HITECHSEALS.COM
Rod Style
C
Urethane
Urethane U-Cups
A B
U-Cups
A B C A B C
MRO 81682 8.00 16.00 8.20 MRO 25358BH 25.00 35.00 8.00
MRO 12184BH 12.00 18.00 4.00 MRO 253582 25.00 35.00 8.20
MRO 121945BH 12.00 19.00 4.50 MRO 283653BH 28.00 36.00 5.30
MRO 122057 12.00 20.00 5.70 MRO 283657 28.00 36.00 5.70
MRO 122282 12.00 22.00 8.20 MRO 28368 28.00 36.00 8.00
MRO 152257 15.00 22.00 5.70 MRO 28388BH 28.00 38.00 8.00
MRO 15258 15.00 25.00 8.00 MRO 28536565BH 28.50 36.50 6.50
MRO 162457 16.00 24.00 5.70 MRO 303857 30.00 38.00 5.70
MRO 16265 16.00 26.00 5.00 MRO 30386 30.00 38.00 6.00
MRO 162673 16.00 26.00 7.30 MRO 30388 30.00 38.00 8.00
MRO17256 17.00 25.00 6.00 MRO 30407BH 30.00 40.00 7.00
MRO 182445 18.00 24.00 4.50 MRO 304072 30.00 40.00 7.20
MRO 182657 18.00 26.00 5.70 MRO 304010 30.00 40.00 10.00
MRO 18267BH 18.00 26.00 7.00 MRO 304010BH 30.00 40.00 10.00
MRO 18268 18.00 26.00 8.00 MRO 304310 30.00 43.00 10.00
MRO 182682 18.00 26.00 8.20 MRO 324057 32.00 40.00 5.70
MRO 20265 20.00 26.00 5.00 MRO 32407BH 32.00 40.00 7.00
MRO 202857 20.00 28.00 5.70 MRO 324273 32.00 42.00 7.30
MRO 202857BH 20.00 28.00 5.70 MRO 324210BH 32.00 42.00 10.00
MRO 22305 22.00 30.00 5.00 MRO 324710 32.00 47.00 10.00
MRO 223057 22.00 30.00 5.70 MRO 3247225 32.00 47.00 22.50
MRO 223082 22.00 30.00 8.20 MRO 334310 33.00 43.00 10.00
MRO 223273BH 22.00 32.00 7.30 MRO 334310BH 33.00 43.00 10.00
MRO 223282 22.00 32.00 8.20 MRO 354357 35.00 43.00 5.70
MRO 253357 25.00 33.00 5.70 MRO 354357BH 35.00 43.00 5.70
MRO 253357BH 25.00 33.00 5.70 MRO 35456 35.00 45.00 6.00
MRO 25336 25.00 33.00 6.00 MRO 35457BH 35.00 45.00 7.00
MRO 253310 25.00 33.00 10.00 MRO 354572 35.00 45.00 7.20
MRO 253573 25.00 35.00 7.30 MRO 354510 35.00 45.00 10.00
HITECHSEALS.COM 221
Rod Style
A B C A B C
U-Cups
Urethane U-Cups
MRO 364457 36.00 44.00 5.70 MRO 506510 50.00 65.00 10.00
MRO 364482 36.00 44.00 8.20 MRO 506510BH 50.00 65.00 10.00
MRO 364673 36.00 46.00 7.30 MRO 5065114 50.00 65.00 11.40
MRO 364610 36.00 46.00 10.00 MRO 5065114BH 50.00 65.00 11.40
Urethane
MRO 364610BH 36.00 46.00 10.00 MRO 526210BH 52.00 62.00 10.00
MRO 365110BH 36.00 51.00 10.00 MRO 537011 53.00 70.00 11.00
MRO 404857 40.00 48.00 5.70 MRO 556573 55.00 65.00 7.30
MRO 404857BH 40.00 48.00 5.70 MRO 556510 55.00 65.00 10.00
MRO 404882 40.00 48.00 8.20 MRO 5565118 55.00 65.00 11.80
MRO 40507 40.00 50.00 7.00 MRO 556810 55.00 68.00 10.00
MRO 405073 40.00 50.00 7.30 MRO 557010 55.00 70.00 10.00
MRO 405082 40.00 50.00 8.20 MRO 566665 56.00 66.00 6.50
MRO 405010 40.00 50.00 10.00 MRO 566673 56.00 66.00 7.30
MRO 405010BH 40.00 50.00 10.00 MRO 566682 56.00 66.00 8.20
MRO 405595 40.00 55.00 9.50 MRO 566610BH 56.00 66.00 10.00
MRO 405510 40.00 55.00 10.00 MRO 56719 56.00 71.00 9.00
MRO 405510BH 40.00 55.00 10.00 MRO 5671114 56.00 71.00 11.40
MRO 425057 42.00 50.00 5.70 MRO 5671114BH 56.00 71.00 11.40
MRO 425211 42.00 52.00 11.00 MRO 587095 58.00 70.00 9.50
MRO 436011 43.00 60.00 11.00 MRO 607073 60.00 70.00 7.30
MRO 455382 45.00 53.00 8.20 MRO 607010 60.00 70.00 10.00
MRO 4553113BH 45.00 53.00 11.30 MRO 6070118 60.00 70.00 11.80
MRO 45556BH 45.00 55.00 6.00 MRO 607210 60.00 72.00 10.00
MRO 455573BH 45.00 55.00 7.30 MRO 607310 60.00 73.00 10.00
MRO 455575 45.00 55.00 7.50 MRO 607510 60.00 75.00 10.00
MRO 45558 45.00 55.00 8.00 MRO 607510BH 60.00 75.00 10.00
MRO 455510 45.00 55.00 10.00 MRO 6075165BH 60.00 75.00 16.50
MRO 4555115BH 45.00 55.00 11.50 MRO 63736 63.00 73.00 6.00
MRO 45567 45.00 56.00 7.00 MRO 6373118 63.00 73.00 11.80
MRO 4557795BH 45.00 57.70 9.50 MRO 637587 63.00 75.00 8.70
MRO 456010BH 45.00 60.00 10.00 MRO 6378114 63.00 78.00 11.40
MRO505710BH 50.00 57.00 10.00 MRO 6378114BH 63.00 78.00 11.40
MRO 5058109 50.00 58.00 10.90 MRO 6383114BH 63.00 83.00 11.40
MRO 50606BH 50.00 60.00 6.00 MRO 657787 65.00 77.00 8.70
MRO 506073 50.00 60.00 7.30 MRO 6577795BH 65.00 77.70 9.50
MRO 50608 50.00 60.00 8.00 MRO 657810 65.00 78.00 10.00
MRO 506010 50.00 60.00 10.00 MRO 687664 68.00 76.00 6.40
MRO 506010BH 50.00 60.00 10.00 MRO 7078109 70.00 78.00 10.90
MRO 506012 50.00 60.00 12.00 MRO 7080118 70.00 80.00 11.80
MRO 506295 50.00 62.00 9.50 MRO 708287 70.00 82.00 8.70
MRO 506210 50.00 62.00 10.00 MRO 708287BH 70.00 82.00 8.70
MRO 506310 50.00 63.00 10.00 MRO 7085114 70.00 85.00 11.40
222 HITECHSEALS.COM
Rod Style
A B C A B C
Urethane U-Cups
MRO 7090146 70.00 90.00 14.60 MRO 11512514BH 115.00 125.00 14.00
MRO 7585118 75.00 85.00 11.80 MRO 11513011 115.00 130.00 11.00
MRO 758787 75.00 87.00 8.70 MRO 115135146 115.00 135.00 14.60
MRO 75879 75.00 87.00 9.00 MRO 12013516 120.00 135.00 16.00
MRO 758810 75.00 88.00 10.00 MRO 12014013 120.00 140.00 13.00
MRO 7588132 75.00 88.00 13.20 MRO 120140146 120.00 140.00 14.60
MRO 75909 75.00 90.00 9.00 MRO 12014517 120.00 145.00 17.00
MRO 759010 75.00 90.00 10.00 MRO 125140109 125.00 140.00 10.90
MRO 759512 75.00 95.00 12.00 MRO 12514512 125.00 145.00 12.00
MRO 788683 78.00 86.00 8.30 MRO 125145146 125.00 145.00 14.60
MRO 80888 80.00 88.00 8.00 MRO 12514516BH 125.00 145.00 16.00
MRO 8090118 80.00 90.00 11.80 MRO 12515019 125.00 150.00 19.00
MRO 809287 80.00 92.00 8.70 MRO 130140145 130.00 140.00 14.50
MRO 809510 80.00 95.00 10.00 MRO 1301459 130.00 145.00 9.00
MRO 8095114BH 80.00 95.00 11.40 MRO 130150146 130.00 150.00 14.60
MRO 80100114 80.00 100.00 11.40 MRO 135145135 135.00 145.00 13.50
MRO 80100146BH 80.00 100.00 14.60 MRO 14016012 140.00 160.00 12.00
MRO 8010515 80.00 105.00 15.00 MRO 14016012BH 140.00 160.00 12.00
MRO 859787 85.00 97.00 8.70 MRO 140160146BH 140.00 160.00 14.60
MRO 85100114 85.00 100.00 11.40 MRO 150170146 150.00 170.00 14.60
MRO 8510012 85.00 100.00 12.00 MRO 150180173 150.00 180.00 17.30
MRO 9010073BH 90.00 100.00 7.30 MRO 160185146 160.00 185.00 14.60
MRO 9010287BH 90.00 102.00 8.70 MRO 180200146 180.00 200.00 14.60
MRO 90105114 90.00 105.00 11.40 MRO 19021015 190.00 210.00 15.00
MRO 90110114 90.00 110.00 11.40 MRO 20021215 200.00 212.00 15.00
MRO 90110114BH 90.00 110.00 11.40 MRO 20022016 200.00 220.00 16.00
MRO 95103115BH 95.00 103.00 11.50 MRO 200225146 200.00 225.00 14.60
MRO 951109 95.00 110.00 9.00 MRO 200230227 200.00 230.00 22.70
MRO 9511010 95.00 110.00 10.00 MRO 210230146 210.00 230.00 14.60
MRO 9511512 95.00 115.00 12.00 MRO 23025014 230.00 250.00 14.00
MRO 10011013BH 100.00 110.00 13.00 MRO 24026016 240.00 260.00 16.00
MRO 100115116 100.00 115.00 11.60 MRO 24027019 240.00 270.00 19.00
MRO 100120114 100.00 120.00 11.40 MRO 270300173 270.00 300.00 17.30
MRO 100120114BH 100.00 120.00 11.40 MRO 285315173 285.00 315.00 17.30
MRO 10012015 100.00 120.00 15.00 MRO 32535520 325.00 355.00 20.00
MRO 10511512 105.00 115.00 12.00 MRO 340370173 340.00 370.00 17.30
MRO 105120114 105.00 120.00 11.40 MRO 34037020BH 340.00 370.00 20.00
MRO 105125146 105.00 125.00 14.60 MRO 360380146 360.00 380.00 14.60
MRO 110125109 110.00 125.00 10.90 MRO 36039020 360.00 390.00 20.00
MRO 110130146 110.00 130.00 14.60 MRO 370390146 370.00 390.00 14.60
MRO 11013016 110.00 130.00 16.00 MRO 39042019 390.00 420.00 19.00
MRO 110135145BH 110.00 135.00 14.50 MRO 50054034 500.00 540.00 34.00
HITECHSEALS.COM 223
Piston Style
C
Urethane U-Cups
U-Cups
A B
Urethane
A B C A B C
Bore Groove Groove Bore Groove Groove
MPI 2230425 30.00 22.00 4.25 MPI 78100145 100.00 78.00 14.50
MPI 2230625 30.00 22.00 6.25 MPI 8510515 105.00 85.00 15.00
MPI 254095 40.00 25.00 9.50 MPI 9010042 100.00 90.00 4.20
MPI 33408 40.00 33.00 8.00 MPI 9011010 110.00 90.00 10.00
MPI 334012 40.00 33.00 12.00 MPI 11013012 130.00 110.00 12.00
MPI 486310 63.00 48.00 10.00 MPI 1121259 125.00 112.00 9.00
MPI 50607 60.00 50.00 7.00 MPI 11213212 132.00 112.00 12.00
MPI 536373 63.00 53.00 7.30 MPI 13515010 150.00 135.00 10.00
MPI 536312 63.00 53.00 12.00 MPI 1451609 160.00 145.00 9.00
MPI 6068115 68.00 60.00 11.50 MPI 25028022 280.00 250.00 22.00
MPI 61716 71.00 61.00 6.00 MPI 28030015 300.00 280.00 15.00
MPI 7080425 80.00 70.00 4.25 MPI 33536018 360.00 335.00 18.00
MPI 728012 80.00 72.00 12.00 MPI 42046030 460.00 420.00 30.00
MPI 759010 90.00 75.00 10.00
Piston Style w/ an Anti-Extrusion Ring
A B C A B C
MPI 30459UE 45.00 30.00 9.00 MPI 120140125UE 140.00 120.00 12.50
MPI 304595UE 45.00 30.00 9.50 MPI 12015019UE 150.00 120.00 19.00
MPI 355095UE 50.00 35.00 9.50 MPI 115140152UE 140.00 125.00 15.20
MPI 355010UE 50.00 35.00 10.00 MPI 130160186UE 160.00 130.00 18.60
MPI 456095UE 60.00 45.00 9.50 MPI 150180186UE 180.00 150.00 18.60
MPI 486393UE 63.00 48.00 9.30 MPI 170200186UE 200.00 170.00 18.90
MPI 5070125UE 70.00 50.00 12.50 MPI 220250186UE 250.00 220.00 18.60
MPI 6080122UE 80.00 60.00 12.20 MPI 22525017UE 250.00 225.00 17.00
MPI 80100122UE 100.00 80.00 12.20 MPI 250280186UE 280.00 250.00 18.60
MPI 8510095UE 100.00 85.00 9.50 MPI 27030019UE 300.00 270.00 19.00
MPI 100125155UE 125.00 100.00 15.50
224 HITECHSEALS.COM
Metric Seals Buffer Seals
Loader Materials
Buffer
Buffer Seals
Seals
MR MR w/ Pressure S
Relief Port (PR)
Product Description
Buffer seals are commonly used in combination with another rod seal, typically a U-cup style seal. In rod applications, buffer
seals absorb pressure fluctuations when working under high-load conditions; this increases the lifespan of the rod seal.
Part Numbers:
MRB - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Width Style Material - if other than standard
Example: MRB 20 307 42 MR - Metric MR Style Buffer Seal, Bronze Filled PTFE, Nitrile Loader, 20.00 mm I.D., 30.70 mm O.D.,
4.20 mm Width
HITECHSEALS.COM 225
Buffer Seals Metric Seals
MR Style
Typical Rod
D C
Seal placement
Buffer Seals
Seals
B A
Buffer
The standard materials for MR style buffer seals is a R

bronze filled PTFE ring with a nitrile loader.
A B C D R
Shaft Groove Groove Seal Gland
Part Number Diameter Diameter Width Height Profile Radius
MRB 1014922 MR 10.00 14.90 2.20 2.00 2.45 0.30
MRB 1017332 MR 10.00 17.30 3.20 3.00 3.65 0.50
MRB 1216922 MR 12.00 16.90 2.20 2.00 2.45 0.30
MRB 1219332 MR 12.00 19.30 3.20 3.00 3.65 0.50
MRB 1418922 MR 14.00 18.90 2.20 2.00 2.45 0.30
MRB 1421332 MR 14.00 21.30 3.20 3.00 3.65 0.50
MRB 1519922 MR 15.00 19.90 2.20 2.00 2.45 0.30
MRB 1522332 MR 15.00 22.30 3.20 3.00 3.65 0.50
MRB 1620922 MR 16.00 20.90 2.20 2.00 2.45 0.30
MRB 1623332 MR 16.00 23.30 3.20 3.00 3.65 0.50
MRB 1822922 MR 18.00 22.90 2.20 2.00 2.45 0.30
MRB 1825332 MR 18.00 25.30 3.20 3.00 3.65 0.50
MRB 2027332 MR 20.00 27.30 3.20 3.00 3.65 0.50
MRB 2030742 MR 20.00 30.70 4.20 4.00 5.35 0.80
MRB 2229332 MR 22.00 29.30 3.20 3.00 3.65 0.50
MRB 2232742 MR 22.00 32.70 4.20 4.00 5.35 0.80
MRB 2532332 MR 25.00 32.30 3.20 3.00 3.65 0.50
MRB 2535742 MR 25.00 35.70 4.20 4.00 5.35 0.80
MRB 2835332 MR 28.00 35.30 3.20 3.00 3.65 0.50
MRB 2838742 MR 28.00 38.70 4.20 4.00 5.35 0.80
MRB 3037332 MR 30.00 37.30 3.20 3.00 3.65 0.50
MRB 3040742 MR 30.00 40.70 4.20 4.00 5.35 0.80
MRB 3239332 MR 32.00 39.30 3.20 3.00 3.65 0.50
MRB 3242742 MR 32.00 42.70 4.20 4.00 5.35 0.80
MRB 3542332 MR 35.00 42.30 3.20 3.00 3.65 0.50
MRB 3545742 MR 35.00 45.70 4.20 4.00 5.35 0.80
MRB 3643332 MR 36.00 43.30 3.20 3.00 3.65 0.50
MRB 3646742 MR 36.00 46.70 4.20 4.00 5.35 0.80
MRB 4050742 MR 40.00 50.70 4.20 4.00 5.35 0.80
MRB 4055163 MR 40.00 55.10 6.30 5.90 7.55 1.20
226 HITECHSEALS.COM
MR Style
Buffer
Buffer Seals
A B C D R
Seals
Shaft Groove Groove Seal Gland
MRB 4252742 MR 42.00 52.70 4.20 4.00 5.35 0.80
MRB 4257163 MR 42.00 57.10 6.30 5.90 7.55 1.20
MRB 4555742 MR 45.00 55.70 4.20 4.00 5.35 0.80
MRB 4560163 MR 45.00 60.10 6.30 5.90 7.55 1.20
MRB 5060742 MR 50.00 60.70 4.20 4.00 5.35 0.80
MRB 5065163 MR 50.00 65.10 6.30 5.90 7.55 1.20
MRB 5565742 MR 55.00 65.70 4.20 4.00 5.35 0.80
MRB 5666742 MR 56.00 66.70 4.20 4.00 5.35 0.80
MRB 5671163 MR 56.00 71.10 6.30 5.90 7.55 1.20
MRB 6070742 MR 60.00 70.70 4.20 4.00 5.35 0.80
MRB 6075163 MR 60.00 75.10 6.30 5.90 7.55 1.20
MRB 6378163 MR 63.00 78.10 6.30 5.90 7.55 1.20
MRB 6580163 MR 65.00 80.10 6.30 5.90 7.55 1.20
MRB 7085163 MR 70.00 85.10 6.30 5.90 7.55 1.20
MRB 7590163 MR 75.00 90.10 6.30 5.90 7.55 1.20
MRB 8095163 MR 80.00 95.10 6.30 5.90 7.55 1.20
MRB 85100163 MR 85.00 100.10 6.30 5.90 7.55 1.20
MRB 90105163 MR 90.00 105.10 6.30 5.90 7.55 1.20
MRB 95110163 MR 95.00 110.10 6.30 5.90 7.55 1.20
MRB 100115163 MR 100.00 115.10 6.30 5.90 7.55 1.20
MRB 105120163 MR 105.00 120.10 6.30 5.90 7.55 1.20
MRB 110125163 MR 110.00 125.10 6.30 5.90 7.55 1.20
MRB 115130163 MR 115.00 130.10 6.30 5.90 7.55 1.20
MRB 120135163 MR 120.00 135.10 6.30 5.90 7.55 1.20
MRB 125140163 MR 125.00 140.10 6.30 5.90 7.55 1.20
MRB 130145163 MR 130.00 145.10 6.30 5.90 7.55 1.20
MRB 140155163 MR 140.00 155.10 6.30 5.90 7.55 1.20
MRB 150165163 MR 150.00 165.10 6.30 5.90 7.55 1.20
MRB 160175163 MR 160.00 175.10 6.30 5.90 7.55 1.20
MRB 170185163 MR 170.00 185.10 6.30 5.90 7.55 1.20
MRB 180195163 MR 180.00 195.10 6.30 5.90 7.55 1.20
MRB 190205163 MR 190.00 205.10 6.30 5.90 7.55 1.20
MRB 200220581 MR 200.00 220.50 8.10 7.60 10.25 2.00
MRB 210230581 MR 210.00 230.50 8.10 7.60 10.25 2.00
MRB 220240581 MR 220.00 240.50 8.10 7.60 10.25 2.00
MRB 230250581 MR 230.00 250.50 8.10 7.60 10.25 2.00
MRB 240260581 MR 240.00 260.50 8.10 7.60 10.25 2.00
MRB 250270581 MR 250.00 270.50 8.10 7.60 10.25 2.00
HITECHSEALS.COM 227
Buffer Seals Metric Seals
MR Style
Buffer Seals
Seals
A B C D R
Buffer
Shaft Groove Groove Gland

MRB 26028481 MR 260.00 284.00 8.10 7.60 12.00 2.00
MRB 27029481 MR 270.00 294.00 8.10 7.60 12.00 2.00
MRB 29031481 MR 290.00 314.00 8.10 7.60 12.00 2.00
MRB 30032481 MR 300.00 324.00 8.10 7.60 12.00 2.00
MRB 32034481 MR 320.00 344.00 8.10 7.60 12.00 2.00
MRB 33035481 MR 330.00 354.00 8.10 7.60 12.00 2.00
MRB 36038481 MR 360.00 384.00 8.10 7.60 12.00 2.00
MRB 40042481 MR 400.00 424.00 8.10 7.60 12.00 2.00
MRB 41043481 MR 410.00 434.00 8.10 7.60 12.00 2.00
MRB 42044481 MR 420.00 444.00 8.10 7.60 12.00 2.00
MRB 43045481 MR 430.00 454.00 8.10 7.60 12.00 2.00
MRB 44046481 MR 440.00 464.00 8.10 7.60 12.00 2.00
MRB 46048481 MR 460.00 484.00 8.10 7.60 12.00 2.00
MRB 48050481 MR 480.00 504.00 8.10 7.60 12.00 2.00
MRB 50052481 MR 500.00 524.00 8.10 7.60 12.00 2.00
MRB 55057481 MR 550.00 574.00 8.10 7.60 12.00 2.00
MRB 56058481 MR 560.00 584.00 8.10 7.60 12.00 2.00
MRB 58060481 MR 580.00 604.00 8.10 7.60 12.00 2.00
MRB 60062481 MR 600.00 624.00 8.10 7.60 12.00 2.00
MRB 63065481 MR 630.00 654.00 8.10 7.60 12.00 2.00
MRB 64066481 MR 640.00 664.00 8.10 7.60 12.00 2.00
MRB 650677395 MR 650.00 677.30 9.50 8.70 13.65 2.00
MRB 670697395 MR 670.00 697.30 9.50 8.70 13.65 2.00
MRB 730757395 MR 730.00 757.30 9.50 8.70 13.65 2.00
MRB 750777395 MR 750.00 777.30 9.50 8.70 13.65 2.00
MRB 800827395 MR 800.00 827.30 9.50 8.70 13.65 2.00
MRB 850877395 MR 850.00 877.30 9.50 8.70 13.65 2.00
MRB 860887395 MR 860.00 887.30 9.50 8.70 13.65 2.00
MRB 890917395 MR 890.00 917.30 9.50 8.70 13.65 2.00
228 HITECHSEALS.COM
Typical Rod
S Style
C D
Seal placement
Buffer
Buffer Seals
A B
Seals
R The standard materials for S style buffer seals includes a moly
glass filled PTFE ring with a nitrile loader.
A B C D R
Shaft Groove Groove Gland
MRB 035455 S 35.00 45.00 5.00 4.70 5.00 0.40
MRB 0405575 S 40.00 55.00 7.50 7.00 7.50 0.40
MRB 0506575 S 50.00 65.00 7.50 7.00 7.50 0.30
MRB 0607575 S 60.00 75.00 7.50 7.00 7.50 0.30
MRB 0708510 S 70.00 85.00 10.00 7.50 7.50 0.30
MRB 08010010 S 80.00 100.00 10.00 9.40 10.00 0.40
MRB 10012010 S 100.00 120.00 10.00 9.40 10.00 0.40
MRB 14016010 S 140.00 160.00 10.00 9.40 10.00 0.40
MRB 15017010 S 150.00 170.00 10.00 9.40 10.00 0.40
MRB 16018010 S 160.00 180.00 10.00 9.40 10.00 0.40
MRB 17519510 S 175.00 195.00 10.00 9.40 10.00 0.40
MRB 18020010 S 180.00 200.00 10.00 9.40 10.00 0.40
MRB 20022010 S 200.00 220.00 10.00 9.40 10.00 0.40
MRB 220245125 S 220.00 245.00 12.50 11.70 12.50 0.40
MRB 240265125 S 240.00 265.00 12.50 11.70 12.50 0.40
MRB 280305125 S 280.00 305.00 12.50 11.70 12.50 0.40
MRB 300325125 S 300.00 325.00 12.50 11.70 12.50 0.40
MRB 32035015 S 320.00 350.00 15.00 14.00 15.00 0.80
MRB 33036015 S 330.00 360.00 15.00 14.00 15.00 0.80
MRB 36039015 S 360.00 390.00 15.00 14.00 15.00 0.80
MRB 38041015 S 380.00 410.00 15.00 14.00 15.00 0.80
MRB 40043015 S 400.00 430.00 15.00 14.00 15.00 0.80
MRB 44047015 S 440.00 470.00 15.00 14.00 15.00 0.80
MRB 46049015 S 460.00 490.00 15.00 14.00 15.00 0.80
MRB 540575175 S 540.00 575.00 17.50 16.40 17.50 0.80
MRB 650685175 S 650.00 685.00 17.50 16.40 17.50 1.20
MRB 80084020 S 800.00 840.00 20.00 18.70 20.00 1.20
MRB 82086020 S 820.00 860.00 20.00 18.70 20.00 1.20
MRB 85089020 S 850.00 890.00 20.00 18.70 20.00 1.20
HITECHSEALS.COM 229
Modular Bearings Metric Seals

Modular Bearings

Product Description
Modular bearings are used in both rod and piston applications. They act as a wear and load bearing surface to help
extend the life of a U-cup. The standard material of modular bearings is a durable nylon. Modular bearings are available
in custom sizes.
Part Numbers:
MBM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O/D. Height Material - if other than Nylon
Example: MBM 40537 - Modular Bearing, Nylon, 40.00 mm I.D., 50.00 mm O.D., 7.00 mm C/S
230 HITECHSEALS.COM
Metric Seals Wear Rings
Glass filled Nylon -240°C to 121°C
Wear
Carbon Graphite filled PTFE -268°C to 288°C
Wear Rings
Rings
Product Description
The function of a wear ring is designed to help keep the piston centered, which allows for even wear and pressure distribution
on the seals. Our standard wear ring materials are nylon and phenolic; additional material options are available upon request.
Wear rings are used in both piston and rod applications. We carry wear rings in three different cut styles including butt cutt,
angle cut and step cut.
Style Advantages Installation Performance

Easiest cut style to install in
many applications.
Easy More Good Best
Complex
Butt Cut
Improves bearing stress at
the gap.
Easy More Good Best
Angle Cut Complex
Improves bearing stress at

gap. Better resistance to
contaminants & spike loads.
Easy More Good Best
Step Cut Complex
Part Numbers:
WRM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Width Material - if other than standard:

BRZ - Bronze filled PTFE
TCG - Carbon Graphite filled PTFE
PH - Phenolic
PEEK - PEEK
HITECHSEALS.COM 231
Wear Rings Metric Seals
Wear Rings
Wear Rings
Additional sizes are available upon request.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
WRM 202563 20.00 25.00 6.30 WRM 455015 45.00 50.00 15.00
WRM 253056 25.00 30.00 5.60 WRM 4551225 45.00 51.00 22.50
WRM 253097 25.00 30.00 9.70 WRM 465115 46.00 51.00 15.00
WRM 253196 25.00 31.00 9.60 WRM 475210 47.00 52.00 10.00
WRM 273056 27.00 30.00 5.60 WRM 495596 49.00 55.00 9.60
WRM 273256 27.00 30.00 5.60 WRM 505556 50.00 55.00 5.60
WRM 273263 27.00 32.00 6.30 WRM 505595 50.00 55.00 9.50
WRM 28328 28.00 32.00 8.00 WRM 505597 50.00 55.00 9.70
WRM 283295 28.00 32.00 9.50 WRM 5056127 50.00 56.00 12.70
WRM 283496 28.00 34.00 9.60 WRM 505515 50.00 55.00 15.00
WRM 303356 30.00 33.00 5.60 WRM 505620 50.00 56.00 20.00
WRM 303497 30.00 34.00 9.70 WRM 505630 50.00 56.00 30.00
WRM 303420 30.00 34.00 20.00 WRM 505812 50.00 58.00 12.00
WRM 303597 30.00 35.00 9.70 WRM 515656 51.00 56.00 5.60
WRM 323551 32.00 35.00 5.10 WRM 515697 51.00 56.00 9.70
WRM 324012 32.00 40.00 12.00 WRM 526010 52.00 60.00 10.00
WRM 344096 34.00 40.00 9.60 WRM 5290127 52.00 90.00 12.70
WRM 35386 35.00 38.00 6.00 WRM 546096 54.00 60.00 9.60
WRM 353996 35.00 39.00 9.60 WRM 5460125 54.00 60.00 12.50
WRM 363956 36.00 39.00 5.60 WRM 5460246 54.00 60.00 24.60
WRM 364156 36.00 41.00 5.60 WRM 505695 55.00 56.00 9.50
WRM 364197 36.00 41.00 9.70 WRM 556096 55.00 60.00 9.60
WRM 404356 40.00 43.00 5.60 WRM 56608 56.00 60.00 8.00
WRM 404492 40.00 44.00 9.20 WRM 566010 56.00 60.00 10.00
WRM 404556 40.00 45.00 5.60 WRM 566197 56.00 61.00 9.70
WRM 404597 40.00 45.00 9.70 WRM 566115 56.00 61.00 15.00
WRM 404696 40.00 46.00 9.60 WRM 566225 56.00 62.00 25.00
WRM 414596 41.00 45.00 9.60 WRM 5763125 57.00 63.00 12.50
WRM 445096 44.00 50.00 9.60 WRM 586397 58.00 63.00 9.70
WRM 455056 45.00 50.00 5.60 WRM 606595 60.00 65.00 9.50
WRM 455097 45.00 50.00 9.70 WRM 606597 60.00 65.00 9.70
WRM 455010 45.00 50.00 10.00 WRM 6065193 60.00 65.00 19.30
232 HITECHSEALS.COM
Wear
Wear Rings
WRM 636825 63.00 68.00 25.00
Rings
WRM 849025 84.00 90.00 25.00
WRM 6369315 63.00 69.00 31.50 WRM 85905 85.00 90.00 5.00
WRM 637030 63.00 70.00 30.00 WRM 859095 85.00 90.00 9.50
WRM 6470127 64.00 70.00 12.70 WRM 8591125 85.00 91.00 12.50
WRM 65708 65.00 70.00 8.00 WRM 86946 86.00 94.00 6.00
WRM 657095 65.00 70.00 9.50 WRM 90956 90.00 95.00 6.00
WRM 657096 65.00 70.00 9.60 WRM 909595 90.00 95.00 9.50
WRM 657015 65.00 70.00 15.00 WRM 909597 90.00 95.00 9.70
WRM 657020 65.00 70.00 20.00 WRM 909515 90.00 95.00 15.00
WRM 707556 70.00 75.00 5.60 WRM 909525 90.00 95.00 25.00
WRM 70756 70.00 75.00 6.00 WRM 91100143 91.00 100.00 14.30
WRM 707596 70.00 75.00 9.60 WRM 93710015 93.70 100.00 15.00
WRM 707515 70.00 75.00 15.00 WRM 94100127 94.00 100.00 12.70
WRM 707525 70.00 75.00 25.00 WRM 9510096 95.00 100.00 9.60
WRM 7076195 70.00 76.00 19.50 WRM 9510015 95.00 100.00 15.00
WRM 717515 71.00 75.00 15.00 WRM 9710510 97.00 105.00 10.00
WRM 728012 72.00 80.00 12.00 WRM 99105245 99.00 105.00 24.50
WRM 748020 74.00 80.00 20.00 WRM 10010595 100.00 105.00 9.50
WRM 757977 75.00 79.00 7.70 WRM 10010515 100.00 105.00 15.00
WRM 758054 75.00 80.00 5.40 WRM 1021106 102.00 110.00 6.00
WRM 758079 75.00 80.00 7.90 WRM 10211095 102.00 110.00 9.50
WRM 758095 75.00 80.00 9.50 WRM 104110125 104.00 110.00 12.50
WRM 758097 75.00 80.00 9.70 WRM 10411025 104.00 110.00 25.00
WRM 7580148 75.00 80.00 14.80 WRM 10511079 105.00 110.00 7.90
WRM 758015 75.00 80.00 15.00 WRM 10511097 105.00 110.00 9.70
WRM 758020 75.00 80.00 20.00 WRM 10511015 105.00 110.00 15.00
WRM 768010 76.00 80.00 10.00 WRM 105111125 105.00 111.00 12.50
WRM 808597 80.00 85.00 9.70 WRM 10611420 106.00 114.00 20.00
WRM 808525 80.00 85.00 25.00 WRM 10811279 108.00 112.00 7.90
WRM 8086125 80.00 86.00 12.50 WRM 11011597 110.00 115.00 9.70
WRM 808635 80.00 86.00 35.00 WRM 11011515 110.00 115.00 15.00
WRM 82906 82.00 90.00 6.00 WRM 11011525 110.00 115.00 25.00
WRM 849015 84.00 90.00 15.00 WRM 11412020 114.00 120.00 20.00
WRM 8490245 84.00 90.00 24.50 WRM 11412030 114.00 120.00 30.00
HITECHSEALS.COM 233
Wear Rings Metric Seals
Wear Rings
Rings
WRM 11512056 115.00 120.00 5.60 WRM 133140148 133.00 140.00 14.80
WRM 11512079 115.00 120.00 7.90 WRM 13314035 133.00 140.00 35.00
Wear
WRM 11512095 115.00 120.00 9.50 WRM 134140125 134.00 140.00 12.50
WRM 11512097 115.00 120.00 9.70 WRM 13514025 134.00 140.00 25.00
WRM 115120148 115.00 120.00 14.80 WRM 13514079 135.00 140.00 7.90
WRM 11512025 115.00 120.00 25.00 WRM 13514095 135.00 140.00 9.50
WRM 116125143 116.00 125.00 14.30 WRM 135140148 135.00 140.00 14.80
WRM 11712579 117.00 125.00 7.90 WRM 13714595 137.00 145.00 9.50
WRM 1181238 118.00 123.00 8.00 WRM 1381439 138.00 143.00 9.00
WRM 11912520 119.00 125.00 20.00 WRM 138145148 138.00 145.00 14.80
WRM 12012579 120.00 125.00 7.90 WRM 139145125 139.00 145.00 12.50
WRM 12012595 120.00 125.00 9.50 WRM 14014579 140.00 145.00 7.90
WRM 120125148 120.00 125.00 14.80 WRM 14014595 140.00 145.00 9.50
WRM 12012515 120.00 125.00 15.00 WRM 14014515 140.00 145.00 15.00
WRM 12012525 120.00 125.00 25.00 WRM 14014840 140.00 148.00 40.00
WRM 12012540 120.00 125.00 40.00 WRM 14515095 145.00 150.00 9.50
WRM 121125198 121.00 125.00 19.80 WRM 15015515 150.00 155.00 15.00
WRM 12112525 121.00 125.00 25.00 WRM 153160148 153.00 160.00 14.80
WRM 12313030 123.00 130.00 30.00 WRM 15316030 153.00 160.00 30.00
WRM 1241306 124.00 130.00 6.00 WRM 15316040 153.00 160.00 40.00
WRM 12513079 125.00 130.00 7.90 WRM 154160195 154.00 160.00 19.50
WRM 12513095 125.00 130.00 9.50 WRM 15516097 155.00 160.00 9.70
WRM 12513015 125.00 130.00 15.00 WRM 15516015 155.00 160.00 15.00
WRM 12513130 125.00 131.00 30.00 WRM 15616079 156.00 160.00 7.90
WRM 12813525 128.00 135.00 25.00 WRM 15816310 158.00 163.00 10.00
WRM 13013579 130.00 135.00 7.90 WRM 16016597 160.00 165.00 9.70
WRM 13013595 130.00 135.00 9.50 WRM 16016515 160.00 165.00 15.00
WRM 130135148 130.00 135.00 14.80 WRM 16517095 165.00 170.00 9.50
WRM 13013515 130.00 135.00 15.00 WRM 16517015 165.00 170.00 15.00
WRM 13113579 131.00 135.00 7.90 WRM 17017515 170.00 175.00 15.00
WRM 1321406 132.00 140.00 6.00 WRM 174180192 174.00 180.00 19.20
WRM 13214097 132.00 140.00 9.70 WRM 17518097 175.00 180.00 9.70
WRM 13214020 132.00 140.00 20.00 WRM 17518015 175.00 180.00 15.00
WRM 13314097 133.00 140.00 9.70 WRM 18018515 180.00 185.00 15.00
234 HITECHSEALS.COM
Wear
Wear Rings
WRM 18018825 180.00 188.00 25.00 WRM 29230040 292.00 300.00 40.00
Rings
WRM 185190148 185.00 190.00 14.80 WRM 29430040 294.00 300.00 40.00
WRM 18519015 185.00 190.00 15.00 WRM 295300245 295.00 300.00 24.50
WRM 19019515 190.00 195.00 15.00 WRM 30030515 300.00 305.00 15.00
WRM 192200225 192.00 200.00 22.50 WRM 30030825 300.00 308.00 25.00
WRM 19420012 194.00 200.00 12.00 WRM 30831325 308.00 313.00 25.00
WRM 194200192 194.00 200.00 19.20 WRM 31432015 314.00 320.00 15.00
WRM 19420020 194.00 200.00 20.00 WRM 315320245 315.00 320.00 24.50
WRM 19420035 194.00 200.00 35.00 WRM 32032525 320.00 325.00 25.00
WRM 19420050 194.00 200.00 50.00 WRM 34034515 340.00 345.00 15.00
WRM 19520095 195.00 200.00 9.50 WRM 36036525 360.00 365.00 25.00
WRM 19520096 195.00 200.00 9.60 WRM 37238025 372.00 380.00 25.00
WRM 19520097 195.00 200.00 9.70 WRM 37538015 375.00 380.00 15.00
WRM 19520015 195.00 200.00 15.00 WRM 38539015 385.00 390.00 15.00
WRM 19520020 195.00 200.00 20.00 WRM 39540015 395.00 400.00 15.00
WRM 19520025 195.00 200.00 25.00 WRM 39540025 395.00 400.00 25.00
WRM 20020512 200.00 205.00 12.00 WRM 40040525 400.00 405.00 25.00
WRM 20020515 200.00 205.00 15.00 WRM 41542025 415.00 420.00 25.00
WRM 20220710 202.00 207.00 10.00 WRM 42243025 422.00 430.00 25.00
WRM 20420910 204.00 209.00 10.00 WRM 42543025 425.00 430.00 25.00
WRM 20521015 205.00 210.00 15.00 WRM 44044525 440.00 445.00 25.00
WRM 21021597 210.00 215.00 9.70 WRM 46046525 460.00 465.00 25.00
WRM 21021512 210.00 215.00 12.00 WRM 49550025 495.00 500.00 25.00
WRM 21021515 210.00 215.00 15.00 WRM 53053825 530.00 538.00 25.00
WRM 22523015 225.00 230.00 15.00 WRM 60060525 600.00 605.00 25.00
WRM 24024515 240.00 245.00 15.00 WRM 60060825 600.00 608.00 25.00
WRM 24225025 242.00 250.00 25.00 WRM 62563025 625.00 630.00 25.00
WRM 24525015 245.00 250.00 15.00 WRM 70571015 705.00 710.00 15.00
WRM 27027515 270.00 275.00 15.00 WRM 78880030 788.00 800.00 30.00
WRM 27227715 272.00 277.00 15.00 WRM 79079825 790.00 798.00 25.00
WRM 27628115 276.00 281.00 15.00 WRM 80080525 800.00 805.00 25.00
WRM 28028515 280.00 285.00 15.00 WRM 95796525 957.00 965.00 25.00
WRM 29229615 292.00 296.00 15.00
WRM 29229715 292.00 297.00 15.00
HITECHSEALS.COM 235
Wear Strip Metric Seals


Wear Strip
Product Description
Wear strips are designed to perform the same function as a wear ring. Wear strips help to keep the piston centered, which
allows for even wear and pressure distribution on the seals. This is an excellent product for individuals who need custom
size of wear rings. Wear strips can help to cut down on inventory and machining costs. Our standard wear strip material is
bronze filled PTFE.
Wear strip is sold by the inch. To calculate the length of wear strip required for a specific size, we recommend using the
following calculation:
Based on I.D.:
[(Desired I.D (mm) + C/S) * π / 25.4 = Length / Unit
Based on O.D.:
[(Desired O.D (mm) - C/S) * π / 25.4 = Length / Unit

π = 3.14159
Part Numbers:
WSM - ___ ___ ___ ___ ___ ___ ___ ___
C/S Height Blank - Bronze filled PTFE

P - Phenolic
Example: WSM 3013 - 5.000” of Bronze Filled PTFE - 3.00 mm C/S, 13.00 mm Height
236 HITECHSEALS.COM
Metric Seals Wear Strip
C/S
Height
Wear Strip
Wear strip is sold by the inch. Additional sizes and materials are available upon request.
Seal Dimensions Seal Dimensions Seal Dimensions

Part Number C/S Height Part Number C/S Height Part Number C/S Height
WSM 15039 1.50 3.90 WSM 2025 2.00 25.00 WSM 3020 3.00 20.00
WSM 15056 1.50 5.60 WSM 2030 2.00 30.00 WSM 3025 3.00 25.00
WSM 1506 1.50 6.00 WSM 25056 2.50 5.60 WSM 35056 3.50 5.60
WSM 15079 1.50 7.90 WSM 25061 2.50 6.10 WSM 3506 3.50 6.00
WSM 1508 1.50 8.00 WSM 25079 2.50 7.90 WSM 35079 3.50 7.90
WSM 15095 1.50 9.50 WSM 25081 2.50 8.10 WSM 35095 3.50 9.50
WSM 15097 1.50 9.70 WSM 25095 2.50 9.50 WSM 35097 3.50 9.70
WSM 1510 1.50 10.00 WSM 25097 2.50 9.70 WSM 35118 3.50 11.80
WSM 15118 1.50 11.80 WSM 25118 2.50 11.80 WSM 3513 3.50 13.00
WSM 1513 1.50 13.00 WSM 2513 2.50 13.00 WSM 3514 3.50 14.00
WSM 1514 1.50 14.00 WSM 2512 2.50 12.00 WSM 3515 3.50 15.00
WSM 1515 1.50 15.00 WSM 25148 2.50 14.80 WSM 3520 3.50 20.00
WSM 1520 1.50 20.00 WSM 2514 2.50 14.00 WSM 3525 3.50 25.00
WSM 1525 1.50 25.00 WSM 2515 2.50 15.00 WSM 4005 4.00 5.00
WSM 20056 2.00 5.60 WSM 2520 2.50 20.00 WSM 40056 4.00 5.60
WSM 2006 2.00 6.00 WSM 2525 2.50 25.00 WSM 4006 4.00 6.00
WSM 20079 2.00 7.90 WSM 30056 3.00 5.60 WSM 40079 4.00 7.90
WSM 2008 2.00 8.00 WSM 3006 3.00 6.00 WSM 40095 4.00 9.50
WSM 20095 2.00 9.50 WSM 30079 3.00 7.90 WSM 40097 4.00 9.70
WSM 20097 2.00 9.70 WSM 30095 3.00 9.50 WSM 40118 4.00 11.80
WSM 2010 2.00 10.00 WSM 30097 3.00 9.70 WSM 4012 4.00 12.00
WSM 2012 2.00 12.00 WSM 30118 3.00 11.80 WSM 4013 4.00 13.00
WSM 2013 2.00 13.00 WSM 30127 3.00 12.70 WSM 4014 4.00 14.00
WSM 2014 2.00 14.00 WSM 3013 3.00 13.00 WSM 4015 4.00 15.00
WSM 2015 2.00 15.00 WSM 3014 3.00 14.00 WSM 4020 4.00 20.00
WSM 20198 2.00 19.80 WSM 30148 3.00 14.80 WSM 4025 4.00 25.00
WSM 2020 2.00 20.00 WSM 3015 3.00 15.00 WSM 4035 4.00 35.00
HITECHSEALS.COM 237
Dry Slide Bearings Metric Seals
Dry Slide Bearings
Product Description
Dry slide bearings are composed of a unique combination of materials, consisting of a carbon steel backing, an intermedi-
ate layer of sintered bronze, and self-lubricating polytetrafluoroethylene (PTFE) sliding lining. This combination offers a
resilient centralization device, preventing metal on metal contact in dynamic, high load applications. Dry slide bearings also
have good wear resistance, excellent heat conductivity, low thermal expansion, and a low friction over a wide range of loads,
speeds, and temperatures. They are suitable for reciprocating, oscillating, rotating, and sliding movements.
Depending on your unique applications, we offer a range of dry slide bearing materials and design options to meet the per-
formance requirements. The most common utilized designs are made from carbon steel, sintered bronze, and either a filled
PTFE or loaded PTFE. Dry Slide bearings are used in a wide variety of industries, including:
• Oil Exploration • Automotive • Lawn & Outdoor Equipment

• Agriculture • Material Handling • Medical & Dental
• Hydraulics & Valves • All Terrain Vehicles (ATVs)
Part Numbers:
DSB - ___ ___ ___ ___ ___ ___ HT
I.D. Height
Example: DSB 32 40 HT - Dry Slide Bearing, 8mm Nominal I.D., 40mm Height.
238 HITECHSEALS.COM
Metric Seals Dry Slide Bearings
H
C/S B
Dry Slide Bearings

I.D O.D 20º ± 8º
0.3 min
A
C/S A B C/S A B
0.75 0.5 ±0.3 -0.1 to -0.4 2 1.2 ±0.4 -0.1 to -0.7
Dimensions and tolerances according to ISO 3547 and GSP 1 0.6 ±0.4 -0.1 to -0.5 2.5 1.6 ±0.8 -0.2 to -1.0
Specifications 1.5 0.6 ±0.04 -0.1 to -0.7
Nominal Groove Dimensions Actual ID
Part DImensions C/S Height Shaft Housing

Number ID OD Min. Max. Min. Max. Min. Max. Min. Max. Min. Max
0203HT 2.75 3.25
2 3.5 0.725 0.745 1.994 2.000 3.500 3.508 2.010 2.058
0205HT 4.75 5.25
0303HT 2.75 3.25
0305HT 3 4.5 4.75 5.25 2.994 3.000 4.500 4.508 3.000 3.048
0306HT 5.75 6.25
0403HT 0.730 0.750 2.75 3.25
0404HT 3.75 4.25
4 5.5 3.992 4.000 5.500 5.508 4.000 4.048
0406HT 5.75 6.25
0410HT 9.75 10.25
0505HT 4.75 5.25
0508HT 5 7 7.75 8.25 4.978 4.990 7.000 7.015 4.990 5.055
0510HT 9.75 10.25
0604HT 3.75 4.25
0606HT 5.75 6.25
6 8 5.978 5.990 8.000 8.015 5.990 6.055
0608HT 7.75 8.25
0.980 1.005
0610HT 9.75 10.25
0710HT 7 9 9.75 10.25 6.972 6.987 9.000 9.015 6.990 7.055
0806HT 5.75 6.25
0808HT 7.75 8.25
8 10 7.972 7.987 10.000 10.015 7.990 8.055
0810HT 9.75 10.25
0812HT 11.75 12.25
1008HT 7.75 8.25
1010HT 9.75 10.25
1012HT 10 12 0.980 1.005 11.75 12.25 9.972 9.987 12.000 12.018 9.990 10.058
1015HT 14.75 15.25
1020HT 19.75 20.25
HITECHSEALS.COM 239

Dry Slide Bearings
1208HT 7.75 8.25

1210HT 9.75 10.25
1212HT 11.75 12.25
12 14 11.966 11.984 14.000 14.018 11.990 12.058
1215HT 14.75 15.25
1220HT 19.75 20.25
1225HT 24.75 25.25
1310HT 9.75 10.25
13 15 12.966 12.984 15.000 15.018 12.990 13.058
1320HT 19.75 20.25
1405HT 4.75 5.25
1410HT 9.75 10.25
1412HT 11.75 12.25
14 16 13.966 13.984 16.000 16.018 13.990 14.058
1415HT 14.75 15.25
1420HT 0.980 1.005 19.75 20.25
1425HT 24.75 25.25
1510HT 9.75 10.25
1512HT 11.75 12.25
1515HT 15 17 14.75 15.25 14.966 14.984 17.000 17.018 14.990 15.058
1520HT 19.75 20.25
1525HT 24.75 25.25
1610HT 9.75 10.25
1612HT 11.75 12.25
1615HT 16 18 14.75 15.25 15.966 15.984 18.000 18.018 15.990 16.058
1620HT 19.75 20.25
1625HT 24.75 25.25
1720HT 17 19 19.75 20.25 16.966 16.984 19.000 19.021 16.990 17.061
1810HT 9.75 10.25
1815HT 14.75 15.25
18 20 0.980 1.005 17.966 17.984 20.000 20.021 17.990 18.061
1820HT 19.75 20.25
1825HT 24.75 25.25
2010HT 9.75 10.25
2015HT 14.75 15.25
2020HT 20 23 19.75 20.25 19.959 19.980 23.000 23.021 19.990 20.071
2025HT 24.75 25.25
2030HT 1.475 1.505 29.75 30.25
2215HT 14.75 15.25
2220HT 19.75 20.25
22 25 21.959 21.980 25.000 25.021 21.990 22.071
2225HT 24.75 25.25
2230HT 29.75 30.25
240 HITECHSEALS.COM

Dry Slide Bearings

2415HT 14.75 15.25
2420HT 19.75 20.25
24 27 23.959 23.980 27.000 27.021 23.990 24.071
2425HT 24.75 25.25
2430HT 29.75 30.25
2515HT 1.475 1.505 14.75 15.25
2520HT 19.75 20.25
2525HT 25 28 24.75 25.25 24.959 24.980 28.000 28.021 24.990 25.071
2530HT 29.75 30.25
2550HT 49.75 50.25
2815HT 14.75 15.25
2820HT 19.75 20.25
28 32 27.959 27.980 32.000 32.025 27.990 28.085
2825HT 24.75 25.25
2830HT 29.75 30.25
3010HT 9.75 10.25
3015HT 14.75 15.25
3020HT 19.75 20.25
30 34 29.959 29.980 34.000 34.025 29.990 30.085
3025HT 24.75 25.25
3030HT 29.75 30.25
3040HT 39.75 40.25
3220HT 19.75 20.25
3230HT 32 36 1.970 2.005 29.75 30.25 31.950 31.975 36.000 36.025 31.990 32.085
3240HT 39.75 40.25
3520HT 19.75 20.25
3530HT 29.75 30.25
3535HT 35 39 34.75 35.25 34.950 34.975 39.000 39.025 34.990 35.085
3540HT 39.75 40.25
3550HT 49.75 50.25
3720HT 37 41 19.75 20.25 36.950 36.975 41.000 41.025 36.990 37.085
4020HT 19.75 20.25
4030HT 29.75 30.25
40 44 39.950 39.975 44.000 44.025 39.990 40.085
4040HT 39.75 40.25
4050HT 49.75 50.25
4520HT 19.75 20.25
4530HT 29.75 30.25
4540HT 45 50 39.75 40.25 44.950 44.975 50.000 50.025 44.990 45.105
2.460 2.505
4545HT 44.75 45.25
4550HT 49.75 50.25
5020HT 50 55 19.75 20.25 49.950 49.975 55.000 55.030 49.990 50.110
HITECHSEALS.COM 241

Dry Slide Bearings
5030HT 29.75 30.25

5040HT 39.75 40.25
50 55 49.950 49.975 55.000 55.030 49.990 50.110
5050HT 49.75 50.25
5060HT 59.75 60.25
5520HT 19.75 20.25
5525HT 2.460 2.505 24.75 25.25
5530HT 29.75 30.25
5540HT 55 60 39.75 40.25 54.940 54.970 60.000 60.030 54.990 55.110
5550HT 49.75 50.25
5555HT 54.75 55.25
5560HT 59.75 60.25
6020HT 19.75 20.25
6030HT 29.75 30.25
6040HT 39.75 40.25
60 65 2.460 2.505 59.940 59.970 65.000 65.030 59.990 60.110
6050HT 49.75 50.25
6060HT 59.75 60.25
6070HT 69.75 70.25
6530HT 29.75 30.25
6550HT 65 70 49.75 50.25 64.940 64.970 70.000 70.030 64.990 65.110
6570HT 69.75 70.25
7040HT 39.75 40.25
2.460 2.505
7050HT 70 75 49.75 50.25 69.940 69.970 75.000 75.030 69.990 70.110
7070HT 69.75 70.25
7560HT 59.75 60.25
75 80 74.940 74.970 80.000 80.030 74.990 75.110
7580HT 79.75 80.25
8060HT 59.50 60.50
80 85 79.954 80.000 85.000 85.035 80.020 80.155
80100HT 99.50 100.50
8530HT 29.50 30.50
8560HT 85 90 59.50 60.50 84.946 85.000 90.000 90.035 85.020 85.155
85100HT 99.50 100.50
9060HT 59.50 60.50
90 95 89.946 90.000 95.000 95.035 90.020 90.155
90100HT 2.440 2.490 99.50 100.50
9560HT 59.50 60.50
95 100 94.946 95.000 100.000 100.035 95.020 95.155
95100HT 99.50 100.50
10050HT 49.50 50.50
10060HT 100 105 59.50 60.50 99.946 100.000 105.000 105.035 100.020 100.155
100115HT 114.50 115.50
10560HT 105 110 59.50 60.50 104.946 105.000 110.000 110.035 105.020 105.155
242 HITECHSEALS.COM

Dry Slide Bearings

105115HT 105 110 114.50 115.50 104.946 105.000 110.000 110.035 105.020 105.155
11060HT 59.50 60.50
110 115 109.946 110.000 115.000 115.035 110.020 110.155
110115HT 2.440 2.490 114.50 115.50
11550HT 49.50 50.50
115 120 114.946 115.000 120.000 120.035 115.020 115.155
11570HT 69.50 70.50
12050HT 49.50 50.50
12060HT 120 125 59.50 60.50 119.946 120.000 125.000 125.040 120.070 120.210
120100HT
2.415 2.465 99.50 100.50
125100HT 125 130 124.937 125.000 130.000 130.040 125.070 125.210
13060HT 59.50 60.50
130 135 129.937 130.000 135.000 135.040 130.070 130.210
130100HT 99.50 100.50
13560HT 59.50 60.50
135 140 134.937 135.000 140.000 140.040 135.070 135.210
13580HT 79.50 80.50
14060HT 59.50 60.50
140 145 139.937 140.000 145.000 145.040 140.070 140.210
140100HT 99.50 100.50
15060HT 59.50 60.50
15080HT 150 155 79.50 80.50 149.937 150.000 155.000 155.040 150.070 150.210
150100HT 99.50 100.50
16080HT 2.415 2.465 79.50 80.50
160 165 159.937 160.000 165.000 165.040 160.070 160.210
160100HT
180100HT 180 185 179.937 180.000 185.000 185.046 180.070 180.216
200100HT 200 205 199.928 200.000 205.000 205.046 200.070 200.216
210100HT 210 215 99.50 100.50 209.928 210.000 215.000 215.046 210.070 210.216
220100HT 220 225 219.928 220.000 225.000 225.046 220.070 220.216
250100HT 250 255 249.928 250.000 255.000 255.052 250.070 250.222
300100HT 300 305 299.919 300.000 305.000 305.052 300.070 300.222
HITECHSEALS.COM 243
Piston Rings Metric Seals

Ring Materials
Piston Rings
Rings
40% Bronze PTFE -268°C to 288°C

Piston
MR E
Product Description
Piston rings are excellent for sealing in hydraulic and pneumatic cylinder applications. They provide excellent low friction
with strong chemical resistance. By changing the material components or ring, the temperature range, frictional characteris-
tics, extrusion resistance, and wearability of the piston seal can be altered.
We stock MR and E styles in a bronze filled PTFE ring and a nitrile loader. Additional material combinations are available
upon request.
Part Numbers:
M2P - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
O.D. I.D. Width

Material - if other than standard
Style:
MR
E
Example: M2P0635242MRMGV - Piston Ring, MR Style, Moly Glasss, Viton™ Loader, 63.00 mm O.D., 52.00 mm I.D.,
4.20 mm Width
244 HITECHSEALS.COM
Metric Seals Piston Rings
MR Style
C
Piston
Piston Rings
B A
Rings
Our standard MR piston rings are composed of a bronze filled
PTFE ring and a nitrile loader.
A B C A B C
M2P 105122MR 10.00 5.10 2.20 M2P 705842MR 70.00 58.00 4.20
M2P 127122MR 12.00 7.10 2.20 M2P 705942MR 70.00 59.00 4.20
M2P 149222MR 14.00 9.20 2.20 M2P 7558873MR 75.00 58.80 7.30
M2P 157532MR 15.00 7.50 3.20 M2P 7559563MR 75.00 59.50 6.30
M2P 168532MR 16.00 8.50 3.20 M2P 756442MR 75.00 64.00 4.20
M2P 1810532MR 18.00 10.50 3.20 M2P 805981MR 80.00 59.00 8.10
M2P 2012532MR 20.00 12.50 3.20 M2P 8064563MR 80.00 64.50 6.30
M2P 2214532MR 22.00 14.50 3.20 M2P 856481MR 85.00 64.00 8.10
M2P 2516934MR 25.00 16.90 3.40 M2P 8569563MR 85.00 69.50 6.30
M2P 2517532MR 25.00 17.50 3.20 M2P 906981MR 90.00 69.00 8.10
M2P 2820532MR 28.00 20.50 3.20 M2P 9074563MR 90.00 74.50 6.30
M2P 3022532MR 30.00 22.50 3.20 M2P 957481MR 95.00 74.00 8.10
M2P 3224532MR 32.00 24.50 3.20 M2P 9579563MR 95.00 79.50 6.30
M2P 3527532MR 35.00 27.50 3.20 M2P 1007981MR 100.00 79.00 8.10
M2P 362542MR 36.00 25.00 4.20 M2P 10084563MR 100.00 84.50 6.30
M2P 3628532MR 36.00 28.50 3.20 M2P 10086272MR 100.00 86.20 7.20
M2P 3652932MR 36.50 29.00 3.20 M2P 1028655MR 102.00 86.00 5.50
M2P 3830532MR 38.00 30.50 3.20 M2P 10589563MR 105.00 89.50 6.30
M2P 402942MR 40.00 29.00 4.20 M2P 1108981MR 110.00 89.00 8.10
M2P 423142MR 42.00 31.00 4.20 M2P 11094563MR 110.00 94.50 6.30
M2P 42325MR 42.00 32.00 5.00 M2P 1159481MR 115.00 94.00 8.10
M2P 4532546MR 45.00 32.50 4.60 M2P 11599563MR 115.00 99.50 6.30
M2P 453442MR 45.00 34.00 4.20 M2P 1209981MR 120.00 99.00 8.10
M2P 5034663MR 50.00 34.60 6.30 M2P 120104563MR 120.00 104.50 6.30
M2P 503942MR 50.00 39.00 4.20 M2P 12510481MR 125.00 104.00 8.10
M2P 554442MR 55.00 44.00 4.20 M2P 125109563MR 125.00 109.50 6.30
M2P 564542MR 56.00 45.00 4.20 M2P 13010881MR 130.00 108.00 8.10
M2P 6044563MR 60.00 44.50 6.30 M2P 13010981MR 130.00 109.00 8.10
M2P 604942MR 60.00 49.00 4.20 M2P 130114563MR 130.00 114.50 6.30
M2P 635242MR 63.00 52.00 4.20 M2P 13511481MR 135.00 114.00 8.10
M2P 655442MR 65.00 54.00 4.20 M2P 14011981MR 140.00 119.00 8.10
M2P 7054563MR 70.00 54.50 6.30 M2P 15012981MR 150.00 129.00 8.10
M2P 70557MR 70.00 55.00 7.00 M2P 16013981MR 160.00 139.00 8.10
HITECHSEALS.COM 245
Piston Rings Metric Seals
MR Style
Piston Rings
Piston Rings
A B C A B C
M2P 17014981MR 170.00 149.00 8.10 M2P 370345581MR 370.00 345.50 8.10
M2P 175159563MR 175.00 159.50 6.30 M2P 380355581MR 380.00 355.50 8.10
M2P 18015981MR 180.00 159.00 8.10 M2P 390365581MR 390.00 365.50 8.10
M2P 18516481MR 185.00 164.00 8.10 M2P 40037581MR 400.00 375.00 8.10
M2P 19016981MR 190.00 169.00 8.10 M2P 400375581MR 400.00 375.50 8.10
M2P 20017981MR 200.00 179.00 8.10 M2P 410385581MR 410.00 385.50 8.10
M2P 20018279MR 200.00 182.00 7.90 M2P 420395581MR 420.00 395.50 8.10
M2P 21018981MR 210.00 189.00 8.10 M2P 430405581MR 430.00 405.50 8.10
M2P 21519481MR 215.00 194.00 8.10 M2P 440415581MR 440.00 415.50 8.10
M2P 22019981MR 220.00 199.00 8.10 M2P 450425581MR 450.00 425.50 8.10
M2P 22520481MR 225.00 204.00 8.10 M2P 460435581MR 460.00 435.50 8.10
M2P 23020981MR 230.00 209.00 8.10 M2P 480455581MR 480.00 455.50 8.10
M2P 24021981MR 240.00 219.00 8.10 M2P 500475581MR 500.00 475.50 8.10
M2P 25022981MR 250.00 229.00 8.10 M2P 520495581MR 520.00 495.50 8.10
M2P 26023981MR 260.00 239.00 8.10 M2P 530505581MR 530.00 505.50 8.10
M2P 27024981MR 270.00 249.00 8.10 M2P 540515581MR 540.00 515.50 8.10
M2P 28025981MR 280.00 259.00 8.10 M2P 55052581MR 550.00 525.00 8.10
M2P 29026981MR 290.00 269.00 8.10 M2P 560535581MR 560.00 535.50 8.10
M2P 30027581MR 300.00 275.00 8.10 M2P 580555581MR 580.00 555.50 8.10
M2P 30027981MR 300.00 279.00 8.10 M2P 600575581MR 600.00 575.50 8.10
M2P 31028981MR 310.00 289.00 8.10 M2P 630605581MR 630.00 605.50 8.10
M2P 32029981MR 320.00 299.00 8.10 M2P 650625581MR 650.00 625.50 8.10
M2P 33030581MR 330.00 305.00 8.10 M2P 70067295MR 700.00 672.00 9.50
M2P 330305581MR 330.00 305.50 8.10 M2P 71068295MR 710.00 682.00 9.50
M2P 340315581MR 340.00 315.50 8.10 M2P 72069295MR 720.00 692.00 9.50
M2P 350325581MR 350.00 325.50 8.10 M2P 80077295MR 800.00 772.00 9.50
M2P 360335581MR 360.00 335.50 8.10 M2P 96593795MR 965.00 937.00 9.50
246 HITECHSEALS.COM
Metric Seals Piston Rings
E Style
C
Piston
Piston Rings
B A
Rings
Our standard E piston rings are composed of a bronze filled
PTFE ring and a nitrile loader.
A B C A B C
M2P 105122E 10.00 5.10 2.20 M2P 11599963E 115.00 99.90 6.30
M2P 127122E 12.00 7.10 2.20 M2P 120104963E 120.00 104.90 6.30
M2P 127222E 12.00 7.20 2.20 M2P 125109963E 125.00 109.90 6.30
M2P 149122E 14.00 9.10 2.20 M2P 140119581E 140.00 119.50 8.10
M2P 1510122E 15.00 10.10 2.20 M2P 140124963E 140.00 124.90 6.30
M2P 2012732E 20.00 12.70 3.20 M2P 150134963E 150.00 134.90 6.30
M2P 2517732E 25.00 17.70 3.20 M2P 160144963E 160.00 144.90 6.30
M2P 2817342E 28.00 17.30 4.20 M2P 17014981E 170.00 149.00 8.10
M2P 3019342E 30.00 19.30 4.20 M2P 170154963E 170.00 154.90 6.30
M2P 3524342E 35.00 24.30 4.20 M2P 180164963E 180.00 164.90 6.30
M2P 4029342E 40.00 29.30 4.20 M2P 200179581E 200.00 179.50 8.10
M2P 4534342E 45.00 34.30 4.20 M2P 210189581E 210.00 189.50 8.10
M2P 4837342E 48.00 37.30 4.20 M2P 22019981E 220.00 199.00 8.10
M2P 503942E 50.00 39.00 4.20 M2P 230209581E 230.00 209.50 8.10
M2P 5039342E 50.00 39.30 4.20 M2P 250229581E 250.00 229.50 8.10
M2P 5544342E 55.00 44.30 4.20 M2P 28025681E 280.00 256.00 8.10
M2P 5544342E 55.00 44.30 4.20 M2P 30027681E 300.00 276.00 8.10
M2P 6044963E 60.00 44.90 6.30 M2P 31028681E 310.00 286.00 8.10
M2P 6347963E 63.00 47.90 6.30 M2P 32029681E 320.00 296.00 8.10
M2P 6549963E 65.00 49.90 6.30 M2P 33030681E 330.00 306.00 8.10
M2P 7054963E 70.00 54.90 6.30 M2P 34031681E 340.00 316.00 8.10
M2P 7559963E 75.00 59.90 6.30 M2P 36033681E 360.00 336.00 8.10
M2P 8064963E 80.00 64.90 6.30 M2P 40037681E 400.00 376.00 8.10
M2P 10084563E 100.00 84.50 6.30 M2P 42039681E 420.00 396.00 8.10
M2P 10084963E 100.00 84.90 6.30 M2P 45042681E 450.00 426.00 8.10
M2P 10589963E 105.00 89.90 6.30 M2P 50047681E 500.00 476.00 8.10
M2P 11094963E 110.00 94.90 6.30
HITECHSEALS.COM 247
Fluid Seals Metric Seals

Fluid Seals
Seals
Anti-Extrusion Material
Acetal -40°C to 100°C
Fluid
Single Acting Single Acting Double Acting (DAM)

Fabric Rod (F) Fabric Rod w/
Anti- Extrusion (FE)
Product Description
Single acting fluid seals (SAM) can work both as a piston or rod seal. Our standard material is a nitrile sealing element with
a fabric reinforced base. Corresponding wear rings are sold separately. Contact us for dimension information of single acting
fluid seals with a anti-extrusion rings.
Our double acting fluid seals (DAM) are designed for use on split pistons. DAMs are composed of a nitrile sealing element,
fabric reinforced base, and two acetal wear rings.
Part Numbers:
SAM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height F - Fabric Base

FE - Fabric Base w/ Anti-Extrusion
DAM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L1 L2
Example: SAM 70 90 14 FE - Single Acting Fluid Seal, Anti-Extrusion Ring, 70.00 mm I.D., 90.00 mm O.D., 14.00 mm
Height
248 HITECHSEALS.COM
Metric Seals Fluid Seals
Single Acting
C
F FE
Fluid
Fluid Seals
B A
Seals
A B C A B C
SAM 5126 F 5.00 12.00 6.00 SAM 40488 F 40.00 48.00 8.00
SAM 6136 F 6.00 13.00 6.00 SAM 40507 FE 40.00 50.00 7.00
SAM 8156 F 8.00 15.00 6.00 SAM 405075 F 40.00 50.00 7.50
SAM 9166 F 9.00 16.00 6.00 SAM 405010 FE 40.00 50.00 10.00
SAM 10176 F 10.00 17.00 6.00 SAM 40529 FE 40.00 52.00 9.00
SAM 4052105 FE 40.00 52.00 10.50
SAM 12196 F 12.00 19.00 6.00
SAM 405222 FE 40.00 52.00 22.00
SAM 14226 F 14.00 22.00 6.00
SAM 40557 FE 40.00 55.00 7.00
SAM 152363 F 15.00 23.00 6.30
SAM 406010 F 40.00 60.00 10.00
SAM 152563 F 15.00 25.00 6.30
SAM 42506 F 42.00 50.00 6.00
SAM 16246 F 16.00 24.00 6.00
SAM 45557 FE 45.00 55.00 7.00
SAM 18266 F 18.00 26.00 6.00 SAM 455575 F 45.00 55.00 7.50
SAM 20286 FE 20.00 28.00 6.00 SAM 45558 F 45.00 55.00 8.00
SAM 22306 22.00 30.00 6.00 SAM 455510 FE 45.00 55.00 10.00
SAM 223295 22.00 32.00 9.50 SAM 456021 FE 45.00 60.00 21.00
SAM 2232175 FE 22.00 32.00 17.50 SAM 50588 F 50.00 58.00 8.00
SAM 24326 24.00 32.00 6.00 SAM 506058 FE 50.00 60.00 5.80
SAM 25336 FE 25.00 33.00 6.00 SAM 50607 FE 50.00 60.00 7.00
SAM 28366 28.00 36.00 6.00 SAM 506075 F 50.00 60.00 7.50
SAM 283875 FE 28.00 38.00 7.50 SAM 506095 FE 50.00 60.00 9.50
SAM 30386 30.00 38.00 6.00 SAM 50629 F 50.00 62.00 9.00
SAM 506556 F 50.00 65.50 6.00
SAM 30458 30.00 45.00 8.00
SAM 506510 FE 50.00 65.00 10.00
SAM 32406 32.00 40.00 6.00
SAM 506522 FE 50.00 65.00 22.00
SAM 35436 35.00 43.00 6.00
SAM 556575 F 55.00 65.00 7.50
SAM 35456 FE 35.00 45.00 6.00
SAM 556510 FE 55.00 65.00 10.00
SAM 354510 FE 35.00 45.00 10.00
SAM 556512 F 55.00 65.00 12.00
SAM 355010 FE 35.00 50.00 10.00
SAM 5565175 FE 55.00 65.00 17.50
SAM 36467 FE 36.00 46.00 7.00 SAM 557514 FE 55.00 75.00 14.00
SAM 36468 FE 36.00 46.00 8.00 SAM 566675 F 56.00 66.00 7.50
SAM 364685 36.00 46.00 8.50 SAM 5671105 FE 56.00 71.00 10.50
SAM 40486 40.00 48.00 6.00 SAM 60707 FE 60.00 70.00 7.00
HITECHSEALS.COM 249
Single Acting
A B C A B C
SAM 607075 F 60.00 70.00 7.50 SAM 14016016 F 140.00 160.00 16.00
Fluid Seals
Seals
SAM 607295 F 60.00 72.00 9.50 SAM 14016028 F 140.00 160.00 28.00
SAM 63759 F 63.00 75.00 9.00 SAM 15017015 F 150.00 170.00 15.00
SAM 638313 FE 63.00 83.00 13.00 SAM 16018015 F 160.00 180.00 15.00
SAM 170182710 F 170.00 182.70 10.00
Fluid
SAM 65779 F 65.00 77.00 9.00

SAM 708012 FE 70.00 80.00 12.00 SAM 18020015 F 180.00 200.00 15.00
SAM 70829 F 70.00 82.00 9.00 SAM 20022015 F 200.00 220.00 15.00
SAM 708295 F 70.00 82.00 9.50 SAM 20022016 F 200.00 220.00 16.00
SAM 708210 FE 70.00 82.00 10.00 SAM 20022535 F 200.00 225.00 35.00
SAM 708412 FE 70.00 84.00 12.00 SAM 21023016 F 210.00 230.00 16.00
SAM 7085115 F 70.00 85.00 11.50
SAM 708512 FE 70.00 85.00 12.00
SAM 709013 FE 70.00 90.00 13.00
SAM 709014 FE 70.00 90.00 14.00
SAM 78868 F 78.00 86.00 8.00
SAM 80929 F 80.00 92.00 9.00
SAM 809295 F 80.00 92.00 9.50
SAM 809296 F 80.00 92.00 9.60
SAM 809512 FE 80.00 95.00 12.00
SAM 8010013 FE 80.00 100.00 13.00
SAM 8010015 FE 80.00 100.00 15.00
SAM 85979 F 85.00 97.00 9.00
SAM 85100125 F 85.00 100.00 12.50
SAM 8510510 F 85.00 105.00 10.00
SAM 901029 F 90.00 102.00 9.00
SAM 9010595 F 90.00 105.00 9.50
SAM 9010512 FE 90.00 105.00 12.00
SAM 90110114 FE 90.00 110.00 11.40
SAM 9011015 FE 90.00 110.00 15.00
SAM 95110113 F 95.00 110.00 11.30
SAM 9511513 FE 95.00 115.00 13.00
SAM 100115113 F 100.00 115.00 11.30
SAM 10512015 FE 105.00 120.00 15.00
SAM 110125113 F 110.00 125.00 11.30
SAM 115130113 F 115.00 130.00 11.30
SAM 12014012 FE 120.00 140.00 12.00
SAM 125140113 F 125.00 140.00 11.30
SAM 13014515 F 130.00 145.00 15.00
SAM 13515011 F 135.00 150.00 11.00
SAM 14016014 F 140.00 160.00 14.00
250 HITECHSEALS.COM
Metric Seals Fluid Seals
Double Acting
C2
C1
Fluid
Fluid Seals
B A
Seals
A B C1 C2 A B C1 C2
DAM 15251220 25.00 15.00 12.00 20.00 DAM 48632030 63.00 48.00 20.00 30.00
DAM 2130135175 30.00 21.00 13.50 17.50 DAM 49652026 65.00 49.00 20.00 26.00
DAM 2232155207 32.00 22.00 15.50 20.70 DAM 50651831 65.00 50.00 18.00 31.00
DAM 22321628 32.00 22.00 16.00 28.00 DAM 50702234 70.00 50.00 22.00 34.00
DAM 24401830 40.00 24.00 18.00 30.00 DAM 51632028 63.00 51.00 20.00 28.00
DAM 2535155207 35.00 25.00 15.50 20.70 DAM 536312520 63.00 53.00 12.50 20.00
DAM 2535163291 35.00 25.00 16.30 29.10 DAM 54702026 70.00 54.00 20.00 26.00
DAM 26401520 40.00 26.00 15.00 20.00 DAM 55702030 70.00 55.00 20.00 30.00
DAM 29451831 45.00 29.00 18.00 31.00 DAM 55752234 75.00 55.00 22.00 34.00
DAM 30401220 40.00 30.00 12.00 20.00 DAM 55753044 75.00 55.00 30.00 44.00
DAM 304016428 40.00 30.00 16.40 28.00 DAM 58702029 70.00 58.00 20.00 29.00
DAM 31451521 45.00 31.00 15.00 21.00 DAM 59752026 75.00 59.00 20.00 26.00
DAM 32401521 40.00 32.00 15.00 21.00 DAM 60802234 80.00 60.00 22.00 34.00
DAM 34501831 50.00 34.00 18.00 31.00 DAM 6080224352 80.00 60.00 22.40 35.20
DAM 34502026 50.00 34.00 20.00 26.00 DAM 60803145 80.00 60.00 31.00 45.00
DAM 38502028 50.00 38.00 20.00 28.00 DAM 62802229 80.00 62.00 22.00 29.00
DAM 39551830 55.00 39.00 18.00 30.00 DAM 637520528 75.00 63.00 20.50 28.00
DAM 39552126 55.00 39.00 21.00 26.00 DAM 65802028 80.00 65.00 20.00 28.00
DAM 40501119 50.00 40.00 11.00 19.00 DAM 65852234 85.00 65.00 22.00 34.00
DAM 4050125205 50.00 40.00 12.50 20.50 DAM 66802233 80.00 66.00 22.00 33.00
DAM 435520529 55.00 43.00 20.50 29.00 DAM 70902234 90.00 70.00 22.00 34.00
DAM 44601831 60.00 44.00 18.00 31.00 DAM 72902229 90.00 72.00 22.00 29.00
DAM 44602026 60.00 44.00 20.00 26.00 DAM 75902030 90.00 75.00 20.00 30.00
DAM 4555125205 55.00 45.00 12.50 20.50 DAM 75952236 95.00 75.00 22.00 36.00
DAM 47631830 63.00 47.00 18.00 30.00 DAM 751002234 100.00 75.00 22.00 34.00
DAM 47631932 63.00 47.00 19.00 32.00 DAM 76902232 90.00 76.00 22.00 32.00
DAM 47632026 63.00 47.00 20.00 26.00 DAM 801002240 100.00 80.00 22.00 40.00
DAM 48602028 60.00 48.00 20.00 28.00 DAM 801003554 100.00 80.00 35.00 54.00
HITECHSEALS.COM 251
Double Acting
A B C1 C2 A B C1 C2
Fluid Seals
Seals

DAM 801052235 105.00 80.00 22.00 35.00 DAM 1281502536 150.00 128.00 26.50 37.00
DAM 821002230 100.00 82.00 22.00 30.00 DAM 1301602444 160.00 130.00 24.00 44.00
Fluid
DAM 851002030 100.00 85.00 20.00 30.00 DAM 1301602538 160.00 130.00 25.00 38.00
DAM 851102235 110.00 85.00 22.00 35.00 DAM 1351602544 160.00 135.00 25.00 44.00
DAM 861002232 100.00 86.00 22.00 32.00 DAM 13516045704 160.00 135.00 45.00 70.40
DAM 901102537 110.00 90.00 25.00 37.00 DAM 1381602636 160.00 138.00 26.00 36.00
DAM 1401652544 165.00 140.00 25.00 44.00
DAM 901103554 110.00 90.00 35.00 54.00
DAM 1401702538 170.00 140.00 25.00 38.00
DAM 901152235 115.00 90.00 22.00 35.00
DAM 1431602040 160.00 143.00 20.00 40.00
DAM 921102230 110.00 92.00 22.00 30.00
DAM 143165265365 165.00 143.00 26.50 36.50
DAM 951102030 110.00 95.00 20.00 30.00
DAM 1451702550 170.00 145.00 25.00 50.00
DAM 951202235 120.00 95.00 22.00 35.00
DAM 1481702637 170.00 148.00 26.00 37.00
DAM 961102232 110.00 96.00 22.00 32.00
DAM 1501752550 175.00 150.00 25.00 50.00
DAM 971152229 115.00 97.00 22.00 29.00 DAM 1501803446 180.00 150.00 34.00 46.00
DAM 1001202538 120.00 100.00 25.00 38.00 DAM 158180265367 180.00 158.00 26.50 36.70
DAM 1001252538 125.00 100.00 25.00 38.00 DAM 1631802640 180.00 163.00 26.00 40.00
DAM 1001253857 125.00 100.00 38.00 57.00 DAM 1651902550 190.00 165.00 25.00 50.00
DAM 1031252636 125.00 103.00 26.00 36.00 DAM 1702003547 200.00 170.00 35.00 47.00
DAM 10512525376 125.00 105.00 25.00 37.60 DAM 1752002550 200.00 175.00 25.00 50.00
DAM 1051302537 130.00 105.00 25.00 37.00 DAM 1752003144 200.00 175.00 31.00 44.00
DAM 1051302543 130.00 105.00 25.00 43.00 DAM 1902203447 220.00 190.00 34.00 47.00
DAM 1081252640 125.00 108.00 26.00 40.00 DAM 1952202550 220.00 195.00 25.00 50.00
DAM 1101352544 135.00 110.00 25.00 44.00 DAM 1952204570 220.00 195.00 45.00 70.00
DAM 1151402537 140.00 115.00 25.00 37.00 DAM 200220315 220.00 200.00 31.50 49.90
DAM 1151402544 140.00 115.00 25.00 44.00 DAM 2002253144 225.00 200.00 31.00 44.00
DAM 1181402536 140.00 118.00 25.00 36.00 DAM 2152402550 240.00 215.00 25.00 50.00
DAM 1201452538 145.00 120.00 25.00 38.00 DAM 2152404267 240.00 215.00 42.00 67.00
DAM 1251502544 150.00 125.00 25.00 44.00 DAM 2302503048 250.00 230.00 30.00 48.00
252 HITECHSEALS.COM
Metric Seals Vee-Packing

Vee-Packings
Vee Packing
Plastic Materials
Top Center Bottom
Product Description
Vee packing is commonly used in adjustable gland applications such as telescoping truck hoists, pumps, and valves. Vee
packing sets are composed of a top and bottom component with a varying numbers of centre Vee’s. In situations involving
strict chemical, temperature, or pressure requirements. Vee packing set material composition can be altered to meet the
application’s requirements.
Our standard Vee packing set is composed of fabric reinforced nitrile. Additional material compositions are available.
Part Numbers:
VPM - ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height
Example: VPM 190220505 - Vee Packing Set, 190.00 mm I.D., 220.00 mm O.D., 50.50 mm Height
HITECHSEALS.COM 253
Vee-Packing Metric Seals
Sets
C
Vee-Packing
Vee Packing
B A
A B C A B C
VPM 2028145 20.00 28.00 14.50 VPM 324725 32.00 47.00 25.00
VPM 203016 20.00 30.00 16.00 VPM 3547225 35.00 47.00 22.50
VPM 2030185 20.00 30.00 18.50 VPM 3550225 35.00 50.00 22.50
VPM 2030215 20.00 30.00 21.50 VPM 355128 35.00 51.00 28.00
VPM 2032225 20.00 32.00 22.50 VPM 364616 36.00 46.00 16.00
VPM 2040175 20.00 40.00 17.50 VPM 3648225 36.00 48.00 22.50
VPM 2230145 22.00 30.00 14.50 VPM 3651225 36.00 51.00 22.50
VPM 223216 22.00 32.00 16.00 VPM 365125 36.00 51.00 25.00
VPM 2232185 22.00 32.00 18.50 VPM 3652225 36.00 52.00 22.50
VPM 223220 22.00 32.00 20.00 VPM 385840 38.00 58.00 40.00
VPM 2240225 22.00 40.00 22.50 VPM 405016 40.00 50.00 16.00
VPM 2533145 25.00 33.00 14.50 VPM 4052225 40.00 52.00 22.50
VPM 253516 25.00 35.00 16.00 VPM 4055225 40.00 55.00 22.50
VPM 2535225 25.00 35.00 22.50 VPM 405525 40.00 55.00 25.00
VPM 2537225 25.00 37.00 22.50 VPM 406030 40.00 60.00 30.00
VPM 2540175 25.00 40.00 17.50 VPM 4254225 42.00 54.00 22.50
VPM 2540225 25.00 40.00 22.50 VPM 4257225 42.00 57.00 22.50
VPM 283816 28.00 38.00 16.00 VPM 455516 45.00 55.00 16.00
VPM 2840225 28.00 40.00 22.50 VPM 4555175 45.00 55.00 17.50
VPM 284325 28.00 43.00 25.00 VPM 4560225 45.00 60.00 22.50
VPM 2844235 28.00 44.00 23.50 VPM 456025 45.00 60.00 25.00
VPM 3042225 30.00 42.00 22.50 VPM 456129 45.00 61.00 29.00
VPM 3045222 30.00 45.00 22.20 VPM 4565275 45.00 65.00 27.50
VPM 3050275 30.00 50.00 27.50 VPM 456528 45.00 65.00 28.00
VPM 324216 32.00 42.00 16.00 VPM 486025 48.00 60.00 25.00
VPM 3244225 32.00 44.00 22.50 VPM 506016 50.00 60.00 16.00
VPM 3247225 32.00 47.00 22.50 VPM 5065225 50.00 65.00 22.50
254 HITECHSEALS.COM
Sets
A B C A B C
Vee-Packings
Vee Packing
VPM 506525 50.00 65.00 25.00 VPM 708528 70.00 85.00 28.00
VPM 507026 50.00 70.00 26.00 VPM 709022 70.00 90.00 22.00
VPM 507029 50.00 70.00 29.00 VPM 709030 70.00 90.00 30.00
VPM 507030 50.00 70.00 30.00 VPM 709032 70.00 90.00 32.00
VPM 527226 52.00 72.00 26.00 VPM 7590225 75.00 90.00 22.50
VPM 527230 52.00 72.00 30.00 VPM 759530 75.00 95.00 30.00
VPM 556725 55.00 67.00 25.00 VPM 759540 75.00 95.00 40.00
VPM 5570225 55.00 70.00 22.50 VPM 75100375 75.00 100.00 37.50
VPM 5570265 55.00 70.00 26.50 VPM 789330 78.00 93.00 30.00
VPM 557530 55.00 75.00 30.00 VPM 8095175 80.00 95.00 17.50
VPM 557535 55.00 75.00 35.00 VPM 8095225 80.00 95.00 22.50
VPM 557538 55.00 75.00 38.00 VPM 809525 80.00 95.00 25.00
VPM566820 56.00 68.00 20.00 VPM 8010030 80.00 100.00 30.00
VPM 5671185 56.00 71.00 18.50 VPM 8010032 80.00 100.00 32.00
VPM 5671225 56.00 71.00 22.50 VPM 8010040 80.00 100.00 40.00
VPM 567125 56.00 71.00 25.00 VPM 85100225 85.00 100.00 22.50
VPM 567620 56.00 76.00 20.00 VPM 8510540 85.00 105.00 40.00
VPM 5676225 56.00 76.00 22.50 VPM 90105225 90.00 105.00 22.50
VPM 567632 56.00 76.00 32.00 VPM 9010525 90.00 105.00 25.00
VPM 567639 56.00 76.00 39.00 VPM 9010527 90.00 105.00 27.00
VPM 6075225 60.00 75.00 22.50 VPM 9010533 90.00 105.00 33.00
VPM 607629 60.00 76.00 29.00 VPM 9011032 90.00 110.00 32.00
VPM 607727 60.00 77.00 27.00 VPM 9011040 90.00 110.00 40.00
VPM 608030 60.00 80.00 30.00 VPM 9011045 90.00 110.00 45.00
VPM 608037 60.00 80.00 37.00 VPM 95110225 95.00 110.00 22.50
VPM 6378225 63.00 78.00 22.50 VPM 10011530 100.00 115.00 30.00
VPM 637825 63.00 78.00 25.00 VPM 10011532 100.00 115.00 32.00
VPM 638329 63.00 83.00 29.00 VPM 10012030 100.00 120.00 30.00
VPM 638332 63.00 83.00 32.00 VPM 10012032 100.00 120.00 32.00
VPM 638337 63.00 83.00 37.00 VPM 10012040 100.00 120.00 40.00
VPM 638532 63.00 85.00 32.00 VPM 10012535 100.00 125.00 35.00
VPM 657721 65.00 77.00 21.00 VPM 10012537 100.00 125.00 37.00
VPM 6580225 65.00 80.00 22.50 VPM 10012540 100.00 125.00 40.00
VPM 658029 65.00 80.00 29.00 VPM 10013032 100.00 130.00 32.00
VPM 658529 65.00 85.00 29.00 VPM 10413037 104.00 130.00 37.00
VPM 658532 65.00 85.00 32.00 VPM 10512025 105.00 120.00 25.00
VPM 658535 65.00 85.00 35.00 VPM 10512030 105.00 120.00 30.00
VPM 658540 65.00 85.00 40.00 VPM 10513040 105.00 130.00 40.00
VPM 7085225 70.00 85.00 22.50 VPM 11012521 110.00 125.00 21.00
VPM 708525 70.00 85.00 25.00 VPM 11012530 110.00 125.00 30.00
HITECHSEALS.COM 255
Vee-Packing Metric Seals
Sets
A B C A B C
Vee-Packing
Vee Packing
VPM 11013030 110.00 130.00 30.00 VPM 16019033 160.00 190.00 33.00
VPM 11013040 110.00 130.00 40.00 VPM 16019047 160.00 190.00 47.00
VPM 11013540 110.00 135.00 40.00 VPM 16019050 160.00 190.00 50.00
VPM 11513030 115.00 130.00 30.00 VPM 16019060 160.00 190.00 60.00
VPM 11514038 115.00 140.00 38.00 VPM 16019552 160.00 195.00 52.00
VPM 11514046 115.00 140.00 46.00 VPM 165195505 165.00 195.00 50.50
VPM 12013532 120.00 135.00 32.00 VPM 170195375 170.00 195.00 37.50
VPM 12014025 120.00 140.00 25.00 VPM 17020045 170.00 200.00 45.00
VPM 12014030 120.00 140.00 30.00 VPM 17020060 170.00 200.00 60.00
VPM 12014040 120.00 140.00 40.00 VPM 17520042 175.00 200.00 42.00
VPM 12014546 120.00 145.00 46.00 VPM 18020040 180.00 200.00 40.00
VPM 12015044 120.00 150.00 44.00 VPM 18020540 180.00 205.00 40.00
VPM 12514030 125.00 140.00 30.00 VPM 18021033 180.00 210.00 33.00
VPM 12514034 125.00 140.00 34.00 VPM 18021050 180.00 210.00 50.00
VPM 12514532 125.00 145.00 32.00 VPM 18021060 180.00 210.00 60.00
VPM 12515034 125.00 150.00 34.00 VPM 18521024 185.00 210.00 24.00
VPM 12515040 125.00 150.00 40.00 VPM 19022045 190.00 220.00 45.00
VPM 12515046 125.00 150.00 46.00 VPM 190220505 190.00 220.00 50.50
VPM 13015040 130.00 150.00 40.00 VPM 19022060 190.00 220.00 60.00
VPM 13015546 130.00 155.00 46.00 VPM 19522547 195.00 225.00 47.00
VPM 130160415 130.00 160.00 41.50 VPM 20022040 200.00 220.00 40.00
VPM 14015534 140.00 155.00 34.00 VPM 20022540 200.00 225.00 40.00
VPM 140160285 140.00 160.00 28.50 VPM 20023033 200.00 230.00 33.00
VPM 14016032 140.00 160.00 32.00 VPM 200230375 200.00 230.00 37.50
VPM 14016533 140.00 165.00 33.00 VPM 20023045 200.00 230.00 45.00
VPM 14016540 140.00 165.00 40.00 VPM 20023048 200.00 230.00 48.00
VPM 14016546 140.00 165.00 46.00 VPM 20023050 200.00 230.00 50.00
VPM 14017039 140.00 170.00 39.00 VPM 20023060 200.00 230.00 60.00
VPM 14017046 140.00 170.00 46.00 VPM 205225195 205.00 225.00 19.50
VPM14517849 145.00 178.00 49.00 VPM 21024060 210.00 240.00 60.00
VPM 15016526 150.00 165.00 26.00 VPM 220250325 220.00 250.00 32.50
VPM 15017025 150.00 170.00 25.00 VPM 220250475 220.00 250.00 47.50
VPM 15017040 150.00 170.00 40.00 VPM 22025050 220.00 250.00 50.00
VPM 150180305 150.00 180.00 30.50 VPM 22025060 220.00 250.00 60.00
VPM 15018040 150.00 180.00 40.00 VPM 22025066 220.00 250.00 66.00
VPM 15018046 150.00 180.00 46.00 VPM 22425433 224.00 254.00 33.00
VPM 15018060 150.00 180.00 60.00 VPM 22525533 225.00 255.00 33.00
VPM 16018032 160.00 180.00 32.00 VPM 22525545 225.00 255.00 45.00
VPM 16018040 160.00 180.00 40.00 VPM 22525560 225.00 255.00 60.00
VPM 16018540 160.00 185.00 40.00 VPM 22526537 225.00 265.00 37.00
256 HITECHSEALS.COM
Sets
A B C A B C
Vee-Packings
Vee Packing
VPM 230260525 230.00 260.00 52.50 VPM 31034060 310.00 340.00 60.00
VPM 23026060 230.00 260.00 60.00 VPM 31035080 310.00 350.00 80.00
VPM 23026065 230.00 260.00 65.00 VPM 32035060 320.00 350.00 60.00
VPM 24027045 240.00 270.00 45.00 VPM 32036060 320.00 360.00 60.00
VPM 240270485 240.00 270.00 48.50 VPM 32036063 320.00 360.00 63.00
VPM 24027060 240.00 270.00 60.00 VPM 32036080 320.00 360.00 80.00
VPM 24027064 240.00 270.00 64.00 VPM 32036555 320.00 365.00 55.00
VPM 25028032 250.00 280.00 32.00 VPM 33036060 330.00 360.00 60.00
VPM 25028033 250.00 280.00 33.00 VPM 33037080 330.00 370.00 80.00
VPM 25028045 250.00 280.00 45.00 VPM 34037060 340.00 370.00 60.00
VPM 25028050 250.00 280.00 50.00 VPM 34038054 340.00 380.00 54.00
VPM 25028060 250.00 280.00 60.00 VPM 34038060 340.00 380.00 60.00
VPM26029049 260.00 290.00 49.00 VPM 34038080 340.00 380.00 80.00
VPM 26029060 260.00 290.00 60.00 VPM 35038060 350.00 380.00 60.00
VPM 27030030 270.00 300.00 30.00 VPM 35039060 350.00 390.00 60.00
VPM 270300325 270.00 300.00 32.50 VPM 35039080 350.00 390.00 80.00
VPM 270300375 270.00 300.00 37.50 VPM 36039047 360.00 390.00 47.00
VPM 27030060 270.00 300.00 60.00 VPM 36039060 360.00 390.00 60.00
VPM 27030070 270.00 300.00 70.00 VPM 36040060 360.00 400.00 60.00
VPM 28031050 280.00 310.00 50.00 VPM 36040063 360.00 400.00 63.00
VPM 28031060 280.00 310.00 60.00 VPM 36040080 360.00 400.00 80.00
VPM 280315385 280.00 315.00 38.50 VPM 36940045 369.00 400.00 45.00
VPM 28031545 280.00 315.00 45.00 VPM 400430525 400.00 430.00 52.50
VPM 28032080 280.00 320.00 80.00 VPM 40045065 400.00 450.00 65.00
VPM 29032060 290.00 320.00 60.00 VPM 45051070 450.00 510.00 70.00
VPM 29033080 290.00 330.00 80.00 VPM 46050060 460.00 500.00 60.00
VPM 30033060 300.00 330.00 60.00 VPM 46350055 463.00 500.00 55.00
VPM 30034080 300.00 340.00 80.00 VPM 50053580 500.00 535.00 80.00
VPM 31033030 310.00 330.00 30.00 VPM 57061080 570.00 610.00 80.00
VPM 31033040 310.00 330.00 40.00
HITECHSEALS.COM 257
Oil Seals Metric Seals

Oil Seals
Oil Seals
Single Lip (SL) Double Lip (DL) SA2 VC
L1M L2M BABSL
Product Description
Oil seals are used to seal fluids on rotating shafts at various speeds. Common oil seal applications include gear boxes, electric
motors, and pumps. Oil seals for use on external rotation applications are available upon request.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. Height Blank - Single Lip

DL - Double Lip
OS - Nitrile
XXX - Specific Style
OSV - Viton™/Fluorocarbon
OSS - Silicone
BAB - BAB
Example: OSV 30457DL - Double Lip Fluorocarbon Oil Seal, 30.00 mm I.D., 45.00 mm O.D., 7.00 mm Height
258 HITECHSEALS.COM
Metric Seals Oil Seals
C
0.635 R Max.
Nitrile
A B
Oil
Oil Seals
Seals
15-30°
* Available in both single and double lip (DL) styles.
A B C A B C
OS 5187DL 5.00 18.00 7.00 OS 10307 10.00 30.00 7.00
OS 5195DL 5.00 19.00 5.00 OS 103010 10.00 30.00 10.00
OS 6167 6.00 16.00 7.00 OS 11227 11.00 22.00 7.00
OS 6197 6.00 19.00 7.00 OS 11307 11.00 30.00 7.00
OS 6227DL 6.00 22.00 7.00 OS 12195 12.00 19.00 5.00
OS 7167 7.00 16.00 7.00 OS 12205DL 12.00 20.00 5.00
OS 7227 7.00 22.00 7.00 OS 12207DL 12.00 20.00 7.00
OS 8144 8.00 14.00 4.00 OS 12225* 12.00 22.00 5.00
OS 8155 8.00 15.00 5.00 OS 12227DL 12.00 22.00 7.00
OS 8167 8.00 16.00 7.00 OS 12247DL 12.00 24.00 7.00
OS 8167DL 8.00 16.00 7.00 OS 12257DL 12.00 25.00 7.00
OS 8185 8.00 18.00 5.00 OS 12258 12.00 25.00 8.00
OS 8186 8.00 18.00 6.00 OS 12266 12.00 26.00 6.00
OS 8205DL 8.00 20.00 5.00 OS 12287* 12.00 28.00 7.00
OS 8216DL 8.00 21.00 6.00 OS 12307DL 12.00 30.00 7.00
OS 8227* 8.00 22.00 7.00 OS 123010 12.00 30.00 10.00
OS 8247 8.00 24.00 7.00 OS 12327* 12.00 32.00 7.00
OS 8258DL 8.00 25.00 8.00 OS 13225 13.00 22.00 5.00
OS 8307 8.00 30.00 7.00 OS 13257DL 13.00 25.00 7.00
OS 9187 9.00 18.00 7.00 OS 13265 13.00 26.00 5.00
OS 9227 9.00 22.00 7.00 OS 13267DL 13.00 26.00 7.00
OS 9247 9.00 24.00 7.00 OS 13307 13.00 30.00 7.00
OS 9267 9.00 26.00 7.00 OS 14224 14.00 22.00 4.00
OS 10164 10.00 16.00 4.00 OS 14247* 14.00 24.00 7.00
OS 10185 10.00 18.00 5.00 OS 14255* 14.00 25.00 5.00
OS 10186 10.00 18.00 6.00 OS 14267 14.00 26.00 7.00
OS 10197* 10.00 19.00 7.00 OS 14287* 14.00 28.00 7.00
OS 10205DL 10.00 20.00 5.00 OS 14308DL 14.00 30.00 8.00
OS 10207DL 10.00 20.00 7.00 OS 14357 14.00 35.00 7.00
OS 10226DL 10.00 22.00 6.00 OS 15227 15.00 22.00 7.00
OS 10227 10.00 22.00 7.00 OS 15247* 15.00 24.00 7.00
OS 10227DL 10.00 22.00 7.00 OS 15256* 15.00 25.00 6.00
OS 10247 10.00 24.00 7.00 OS 15257DL 15.00 25.00 7.00
OS 10257DL 10.00 25.00 7.00 OS 15266DL 15.00 26.00 6.00
HITECHSEALS.COM 259
Nitrile
A B C A B C
OS 15277 15.00 27.00 7.00 OS 19328DL 19.00 32.00 8.00
OS 15287* 15.00 28.00 7.00 OS 193210 19.00 32.00 10.00
Oil Seals
Seals
OS 15307* 15.00 30.00 7.00 OS 19358DL 19.00 35.00 8.00

OS 153010 15.00 30.00 10.00 OS 19368 19.00 36.00 8.00
OS 15327* 15.00 32.00 7.00 OS 194010 19.00 40.00 10.00
OS 15355 15.00 35.00 5.00 OS 20286 20.00 28.00 6.00
Oil
OS 15357* 15.00 35.00 7.00 OS 20287* 20.00 28.00 7.00

OS 153510 15.00 35.00 10.00 OS 20305 20.00 30.00 5.00
OS 154010 15.00 40.00 10.00 OS 20307* 20.00 30.00 7.00
OS 16243 16.00 24.00 3.00 OS 20327* 20.00 32.00 7.00
OS 16244 16.00 24.00 4.00 OS 20347 20.00 34.00 7.00
OS 16245* 16.00 24.00 5.00 OS 20355 20.00 35.00 5.00
OS 16247 16.00 24.00 7.00 OS 20356 20.00 35.00 6.00
OS 16267DL 16.00 26.00 7.00 OS 20357* 20.00 35.00 7.00
OS 16287DL 16.00 28.00 7.00 OS 203510DL 20.00 35.00 10.00
OS 16307DL 16.00 30.00 7.00 OS 20367DL 20.00 36.00 7.00
OS 163010 16.00 30.00 10.00 OS 20377DL 20.00 37.00 7.00
OS 16327* 16.00 32.00 7.00 OS 20387* 20.00 38.00 7.00
OS 16357 16.00 35.00 7.00 OS 20388DL 20.00 38.00 8.00
OS 164010 16.00 40.00 10.00 OS 20407* 20.00 40.00 7.00
OS 17254* 17.00 25.00 4.00 OS 20408 20.00 40.00 8.00
OS 17266 17.00 26.00 6.00 OS 204010* 20.00 40.00 10.00
OS 17276 17.00 27.00 6.00 OS 20427* 20.00 42.00 7.00
OS 17277 17.00 27.00 7.00 OS 20458DL 20.00 45.00 8.00
OS 17287* 17.00 28.00 7.00 OS 204510 20.00 45.00 10.00
OS 17307* 17.00 30.00 7.00 OS 20477* 20.00 47.00 7.00
OS 17327* 17.00 32.00 7.00 OS 204710 20.00 47.00 10.00
OS 17338 17.00 33.00 8.00 OS 20527* 20.00 52.00 7.00
OS 17344DL 17.00 34.00 4.00 OS 205210 20.00 52.00 10.00
OS 17357* 17.00 35.00 7.00 OS 22315 22.00 31.00 5.00
OS 17358 17.00 35.00 8.00 OS 22325 22.00 32.00 5.00
OS 173510 17.00 35.00 10.00 OS 22327* 22.00 32.00 7.00
OS 17377 17.00 37.00 7.00 OS 22355* 22.00 35.00 5.00
OS 17387 17.00 38.00 7.00 OS 22357* 22.00 35.00 7.00
OS 17407* 17.00 40.00 7.00 OS 22358DL 22.00 35.00 8.00
OS 174010 17.00 40.00 10.00 OS 22377* 22.00 37.00 7.00
OS 17477 17.00 47.00 7.00 OS 22387 22.00 38.00 7.00
OS 174710 17.00 47.00 10.00 OS 22388* 22.00 38.00 8.00
OS 18266 18.00 26.00 6.00 OS 22407* 22.00 40.00 7.00
OS 18287* 18.00 28.00 7.00 OS 22427* 22.00 42.00 7.00
OS 18307DL 18.00 30.00 7.00 OS 224210 22.00 42.00 10.00
OS 18327* 18.00 32.00 7.00 OS 22477 22.00 47.00 7.00
OS 18358DL 18.00 35.00 8.00 OS 224710 22.00 47.00 10.00
OS 183510 18.00 35.00 10.00 OS 224810 22.00 48.00 10.00
OS 18407 18.00 40.00 7.00 OS 225010 22.00 50.00 10.00
OS 184010 18.00 40.00 10.00 OS 225210DL 22.00 52.00 10.00
OS 18428 18.00 42.00 8.00 OS 23357DL 23.00 35.00 7.00
OS 19276 19.00 27.00 6.00 OS 23406DL 23.00 40.00 6.00
260 HITECHSEALS.COM
Nitrile
A B C A B C
OS 234810DL 23.00 48.00 10.00 OS 25527* 25.00 52.00 7.00
OS 24324 24.00 32.00 4.00 OS 255210* 25.00 52.00 10.00
Oil
Oil Seals
OS 24357 24.00 35.00 7.00 OS 25559DL 25.00 55.00 9.00
OS 24358DL 24.00 35.00 8.00 OS 25628DL 25.00 62.00 8.00
Seals
OS 24366 24.00 36.00 6.00 OS 256210 25.00 62.00 10.00
OS 24367DL 24.00 36.00 7.00 OS 26357 26.00 35.00 7.00
OS 24369 24.00 36.00 9.00 OS 26367DL 26.00 36.00 7.00
OS 24377 24.00 37.00 7.00 OS 26377* 26.00 37.00 7.00
OS 24407 24.00 40.00 7.00 OS 26387DL 26.00 38.00 7.00
OS 24407DL 24.00 40.00 7.00 OS 26405DL 26.00 40.00 5.00
OS 24408DL 24.00 40.00 8.00 OS 26407DL 26.00 40.00 7.00
OS 24428DL 24.00 42.00 8.00 OS 26428DL 26.00 42.00 8.00
OS 244210 24.00 42.00 10.00 OS 264210DL 26.00 42.00 10.00
OS 24477 24.00 47.00 7.00 OS 26477* 26.00 47.00 7.00
OS 24477DL 24.00 47.00 7.00 OS 27408DL 27.00 40.00 8.00
OS 244710 24.00 47.00 10.00 OS 274210* 27.00 42.00 10.00
OS 244710DL 24.00 47.00 10.00 OS 27439DL 27.00 43.00 9.00
OS 24527DL 24.00 52.00 7.00 OS 274710 27.00 47.00 10.00
OS 25326 25.00 32.00 6.00 OS 28354 28.00 35.00 4.00
OS 25326DL 25.00 32.00 6.00 OS 28387DL 28.00 38.00 7.00
OS 25327 25.00 32.00 7.00 OS 28407DL 28.00 40.00 7.00
OS 25336 25.00 33.00 6.00 OS 28408DL 28.00 40.00 8.00
OS 25355DL 25.00 35.00 5.00 OS 28425 28.00 42.00 5.00
OS 25356DL 25.00 35.00 6.00 OS 28427DL 28.00 42.00 7.00
OS 25357 25.00 35.00 7.00 OS 28428 28.00 42.00 8.00
OS 25357DL 25.00 35.00 7.00 OS 28447DL 28.00 44.00 7.00
OS 253510 25.00 35.00 10.00 OS 28458* 28.00 45.00 8.00
OS 25367 25.00 36.00 7.00 OS 284510DL 28.00 45.00 10.00
OS 25367DL 25.00 36.00 7.00 OS 28477* 28.00 47.00 7.00
OS 25376DL 25.00 37.00 6.00 OS 28479 28.00 47.00 9.00
OS 25377 25.00 37.00 7.00 OS 284710* 28.00 47.00 10.00
OS 25377DL 25.00 37.00 7.00 OS 28485 28.00 48.00 5.00
OS 25387 25.00 38.00 7.00 OS 28488DL 28.00 48.00 8.00
OS 25387DL 25.00 38.00 7.00 OS 284811DL 28.00 48.00 11.00
OS 25399 25.00 39.00 9.00 OS 28508 28.00 50.00 8.00
OS 25407* 25.00 40.00 7.00 OS 285010 28.00 50.00 10.00
OS 25408DL 25.00 40.00 8.00 OS 28527* 28.00 52.00 7.00
OS 254010 25.00 40.00 10.00 OS 285210* 28.00 52.00 10.00
OS 25425DL 25.00 42.00 5.00 OS 28559 28.00 55.00 9.00
OS 25427* 25.00 42.00 7.00 OS 286210 28.00 62.00 10.00
OS 25428* 25.00 42.00 8.00 OS 29428 29.00 42.00 8.00
OS 254210DL 25.00 42.00 10.00 OS 30385DL 30.00 38.00 5.00
OS 25457 25.00 45.00 7.00 OS 30405 30.00 40.00 5.00
OS 25458DL 25.00 45.00 8.00 OS 30407* 30.00 40.00 7.00
OS 254510DL 25.00 45.00 10.00 OS 304010 30.00 40.00 10.00
OS 25467* 25.00 46.00 7.00 OS 30425 30.00 42.00 5.00
OS 25477* 25.00 47.00 7.00 OS 30427* 30.00 42.00 7.00
OS 254710DL 25.00 47.00 10.00 OS 304210DL 30.00 42.00 10.00
HITECHSEALS.COM 261
Nitrile
A B C A B C
OS 30449DL 30.00 44.00 9.00 OS 347210 34.00 72.00 10.00
OS 304410 30.00 44.00 10.00 OS 35456 35.00 45.00 6.00
Oil Seals
Seals
OS 30456 30.00 45.00 6.00 OS 35457DL 35.00 45.00 7.00

OS 30457 30.00 45.00 7.00 OS 35477 * 35.00 47.00 7.00
OS 30458DL 30.00 45.00 8.00 OS 354710 * 35.00 47.00 10.00
OS 304510* 30.00 45.00 10.00 OS 35488 * 35.00 48.00 8.00
Oil
OS 30467DL 30.00 46.00 7.00 OS 35496DL 35.00 49.00 6.00

OS 30468 30.00 46.00 8.00 OS 35507 * 35.00 50.00 7.00
OS 30477* 30.00 47.00 7.00 OS 35508DL 35.00 50.00 8.00
OS 304710* 30.00 47.00 10.00 OS 355010 * 35.00 50.00 10.00
OS 30488DL 30.00 48.00 8.00 OS 35526DL 35.00 52.00 6.00
OS 30507DL 30.00 50.00 7.00 OS 35527 * 35.00 52.00 7.00
OS 305010* 30.00 50.00 10.00 OS 35528DL 35.00 52.00 8.00
OS 30527* 30.00 52.00 7.00 OS 355210 * 35.00 52.00 10.00
OS 305210* 30.00 52.00 10.00 OS 35548DL 35.00 54.00 8.00
OS 30557* 30.00 55.00 7.00 OS 35558 * 35.00 55.00 8.00
OS 305510* 30.00 55.00 10.00 OS 355510 * 35.00 55.00 10.00
OS 305610 30.00 56.00 10.00 OS 355511DL 35.00 55.00 11.00
OS 305612 30.00 56.00 12.00 OS 355512 35.00 55.00 12.00
OS 306010 30.00 60.00 10.00 OS 355610DL 35.00 56.00 10.00
OS 30627* 30.00 62.00 7.00 OS 355612DL 35.00 56.00 12.00
OS 306210 30.00 62.00 10.00 OS 35588DL 35.00 58.00 8.00
OS 30728DL 30.00 72.00 8.00 OS 355810 35.00 58.00 10.00
OS 307210DL 30.00 72.00 10.00 OS 356010 35.00 60.00 10.00
OS 31477DL 31.00 47.00 7.00 OS 35627DL 35.00 62.00 7.00
OS 32407 32.00 40.00 7.00 OS 35628DL 35.00 62.00 8.00
OS 32427* 32.00 42.00 7.00 OS 356210DL 35.00 62.00 10.00
OS 32428DL 32.00 42.00 8.00 OS 356212DL 35.00 62.00 12.00
OS 32448DL 32.00 44.00 8.00 OS 356510* 35.00 65.00 10.00
OS 32457* 32.00 45.00 7.00 OS 35677 35.00 67.00 7.00
OS 324510DL 32.00 45.00 10.00 OS 356810 35.00 68.00 10.00
OS 32477* 32.00 47.00 7.00 OS 35727* 35.00 72.00 7.00
OS 32488DL 32.00 48.00 8.00 OS 357210DL 35.00 72.00 10.00
OS 32508 32.00 50.00 8.00 OS 357212* 35.00 72.00 12.00
OS 32527 * 32.00 52.00 7.00 OS 358010 35.00 80.00 10.00
OS 325210 32.00 52.00 10.00 OS 36477 36.00 47.00 7.00
OS 325510 32.00 55.00 10.00 OS 36507* 36.00 50.00 7.00
OS 325610DL 32.00 56.00 10.00 OS 36527* 36.00 52.00 7.00
OS 326210DL 32.00 62.00 10.00 OS 365610 36.00 56.00 10.00
OS 33457 33.00 45.00 7.00 OS 365810DL 36.00 58.00 10.00
OS 33508 33.00 50.00 8.00 OS 36627DL 36.00 62.00 7.00
OS 335010 33.00 50.00 10.00 OS 366210 36.00 62.00 10.00
OS 335210 33.00 52.00 10.00 OS 27377 37.00 37.00 7.00
OS 34457 34.00 45.00 7.00 OS 38507* 38.00 50.00 7.00
OS 344610 34.00 46.00 10.00 OS 38508DL 38.00 50.00 8.00
OS 34488 * 34.00 48.00 8.00 OS 385010DL 38.00 50.00 10.00
OS 345010 34.00 50.00 10.00 OS 38527* 38.00 52.00 7.00
OS 34528 34.00 52.00 8.00 OS 38528 38.00 52.00 8.00
OS 346210 34.00 62.00 10.00 OS 385210 38.00 52.00 10.00
262 HITECHSEALS.COM
Nitrile
A B C A B C
OS 385410 38.00 54.00 10.00 OS 42567 * 42.00 56.00 7.00
OS 38557 38.00 55.00 7.00 OS 42587DL 42.00 58.00 7.00
Oil
Oil Seals
OS 38558DL 38.00 55.00 8.00 OS 425810 42.00 58.00 10.00
OS 385510DL 38.00 55.00 10.00 OS 42607DL 42.00 60.00 7.00
Seals
OS 385612 38.00 56.00 12.00 OS 426010 * 42.00 60.00 10.00
OS 38587DL 38.00 58.00 7.00 OS 426012 42.00 60.00 12.00
OS 385810DL 38.00 58.00 10.00 OS 42627DL 42.00 62.00 7.00
OS 385811DL 38.00 58.00 11.00 OS 42628 * 42.00 62.00 8.00
OS 38608DL 38.00 60.00 8.00 OS 426210DL 42.00 62.00 10.00
OS 386010 38.00 60.00 10.00 OS 426512DL 42.00 65.00 12.00
OS 38627 38.00 62.00 7.00 OS 427010 42.00 70.00 10.00
OS 386210 38.00 62.00 10.00 OS 427210DL 42.00 72.00 10.00
OS 386412 38.00 64.00 12.00 OS 428010 42.00 80.00 10.00
OS 386510 38.00 65.00 10.00 OS 43549DL 43.00 54.00 9.00
OS 387210 38.00 72.00 10.00 OS 436210 43.00 62.00 10.00
OS 40507DL 40.00 50.00 7.00 OS 436610 43.00 66.00 10.00
OS 40526 40.00 52.00 6.00 OS 437510 43.00 75.00 10.00
OS 40527* 40.00 52.00 7.00 OS 44607DL 44.00 60.00 7.00
OS 405210DL 40.00 52.00 10.00 OS 446010 44.00 60.00 10.00
OS 40557 * 40.00 55.00 7.00 OS 44628DL 44.00 62.00 8.00
OS 40558DL 40.00 55.00 8.00 OS 446210 44.00 62.00 10.00
OS 405510 * 40.00 55.00 10.00 OS 446510 * 44.00 65.00 10.00
OS 40567DL 40.00 56.00 7.00 OS 447210 44.00 72.00 10.00
OS 405610 40.00 56.00 10.00 OS 45557 45.00 55.00 7.00
OS 40587 40.00 58.00 7.00 OS 45577 45.00 57.00 7.00
OS 40588DL 40.00 58.00 8.00 OS 45587 * 45.00 58.00 7.00
OS 405810DL 40.00 58.00 10.00 OS 45607 * 45.00 60.00 7.00
OS 406010 * 40.00 60.00 10.00 OS 45608 45.00 60.00 8.00
OS 40627 * 40.00 62.00 7.00 OS 456010DL 45.00 60.00 10.00
OS 40628DL 40.00 62.00 8.00 OS 456110DL 45.00 61.00 10.00
OS 406210 * 40.00 62.00 10.00 OS 45627DL 45.00 62.00 7.00
OS 406212DL 40.00 62.00 12.00 OS 45628 * 45.00 62.00 8.00
OS 406412DL 40.00 64.00 12.00 OS 456210 * 45.00 62.00 10.00
OS 406510 * 40.00 65.00 10.00 OS 456212 45.00 62.00 12.00
OS 406512DL 40.00 65.00 12.00 OS 45658 * 45.00 65.00 8.00
OS 40687 * 40.00 68.00 7.00 OS 456510DL 45.00 65.00 10.00
OS 406812 40.00 68.00 12.00 OS 45688DL 45.00 68.00 8.00
OS 407010 40.00 70.00 10.00 OS 45689DL 45.00 68.00 9.00
OS 40727 * 40.00 72.00 7.00 OS 456810DL 45.00 68.00 10.00
OS 407210 * 40.00 72.00 10.00 OS 456812DL 45.00 68.00 12.00
OS 40808DL 40.00 80.00 8.00 OS 457010 * 45.00 70.00 10.00
OS 408010 * 40.00 80.00 10.00 OS 45728 * 45.00 72.00 8.00
OS 408510 40.00 85.00 10.00 OS 457210 * 45.00 72.00 10.00
OS 409010DL 40.00 90.00 10.00 OS 457212DL 45.00 72.00 12.00
OS 409012DL 40.00 90.00 12.00 OS 45758DL 45.00 75.00 8.00
OS 42528DL 42.00 52.00 8.00 OS 457510 * 45.00 75.00 10.00
OS 42557DL 42.00 55.00 7.00 OS 458010DL 45.00 80.00 10.00
OS 42558 * 42.00 55.00 8.00 OS 458510DL 45.00 85.00 10.00
OS 425510DL 42.00 55.00 10.00 OS 459010 * 45.00 90.00 10.00
HITECHSEALS.COM 263
Nitrile
A B C A B C
OS 46628DL 46.00 62.00 8.00 OS 52628DL 52.00 62.00 8.00
OS 46688DL 46.00 68.00 8.00 OS 52688* 52.00 68.00 8.00
Oil Seals
Seals
OS 46708DL 46.00 70.00 8.00 OS 52728DL 52.00 72.00 8.00

OS 468010 46.00 80.00 10.00 OS 527210* 52.00 72.00 10.00
OS 47627DL 47.00 62.00 7.00 OS 527212DL 52.00 72.00 12.00
OS 47658 47.00 65.00 8.00 OS 527512 52.00 75.00 12.00
Oil
OS 48628* 48.00 62.00 8.00 OS 528510DL 52.00 85.00 10.00

OS 486210DL 48.00 62.00 10.00 OS 53655DL 53.00 65.00 5.00
OS 48659DL 48.00 65.00 9.00 OS 536810 53.00 68.00 10.00
OS 486510* 48.00 65.00 10.00 OS 547010 54.00 70.00 10.00
OS 48688DL 48.00 68.00 8.00 OS 547210DL 54.00 72.00 10.00
OS 486810DL 48.00 68.00 10.00 OS 549013 54.00 90.00 13.00
OS 486812 48.00 68.00 12.00 OS 55688* 55.00 68.00 8.00
OS 48709DL 48.00 70.00 9.00 OS 55708* 55.00 70.00 8.00
OS 487010 48.00 70.00 10.00 OS 557010DL 55.00 70.00 10.00
OS 487012* 48.00 70.00 12.00 OS 55728* 55.00 72.00 8.00
OS 48727* 48.00 72.00 7.00 OS 557210* 55.00 72.00 10.00
OS 48728 48.00 72.00 8.00 OS 55758DL 55.00 75.00 8.00
OS 487210* 48.00 72.00 10.00 OS 557510 55.00 75.00 10.00
OS 487212* 48.00 72.00 12.00 OS 557512DL 55.00 75.00 12.00
OS 488010 48.00 80.00 10.00 OS 557612DL 55.00 76.00 12.00
OS 489010* 48.00 90.00 10.00 OS 55788 55.00 78.00 8.00
OS 489013DL 48.00 90.00 13.00 OS 557810 55.00 78.00 10.00
OS 50584 50.00 58.00 4.00 OS 557812* 55.00 78.00 12.00
OS 506010 50.00 60.00 10.00 OS 55808* 55.00 80.00 8.00
OS 50627* 50.00 62.00 7.00 OS 558010* 55.00 80.00 10.00
OS 506210 50.00 62.00 10.00 OS 558013 55.00 80.00 13.00
OS 506410DL 50.00 64.00 10.00 OS 558210DL 55.00 82.00 10.00
OS 50657 50.00 65.00 7.00 OS 55858* 55.00 85.00 8.00
OS 50658* 50.00 65.00 8.00 OS 558510DL 55.00 85.00 10.00
OS 50688* 50.00 68.00 8.00 OS 558512DL 55.00 85.00 12.00
OS 50689DL 50.00 68.00 9.00 OS 559010DL 55.00 90.00 10.00
OS 506810 50.00 68.00 10.00 OS 56708 56.00 70.00 8.00
OS 506810DL 50.00 68.00 10.00 OS 56728 56.00 72.00 8.00
OS 50708DL 50.00 70.00 8.00 OS 56808 56.00 80.00 8.00
OS 507010* 50.00 70.00 10.00 OS 56858 56.00 85.00 8.00
OS 50728* 50.00 72.00 8.00 OS 58728 58.00 72.00 8.00
OS 50729DL 50.00 72.00 9.00 OS 58759 58.00 75.00 9.00
OS 507210DL 50.00 72.00 10.00 OS 587813 58.00 78.00 13.00
OS 507212* 50.00 72.00 12.00 OS 58808DL 58.00 80.00 8.00
OS 507510DL 50.00 75.00 10.00 OS 588010 58.00 80.00 10.00
OS 507512 50.00 75.00 12.00 OS 588012DL 58.00 80.00 12.00
OS 50808* 50.00 80.00 8.00 OS 588013DL 58.00 80.00 13.00
OS 508010* 50.00 80.00 10.00 OS 588510* 58.00 85.00 10.00
OS 508013DL 50.00 80.00 13.00 OS 589010 58.00 90.00 10.00
OS50858 50.00 85.00 8.00 OS 606810 60.00 68.00 10.00
OS 50908DL 50.00 90.00 8.00 OS 60707 60.00 70.00 7.00
OS 509010* 50.00 90.00 10.00 OS 60728 60.00 72.00 8.00
OS 5011010DL 50.00 110.00 10.00 OS 607410 60.00 74.00 10.00
264 HITECHSEALS.COM
Nitrile
A B C A B C
OS 60758* 60.00 75.00 8.00 OS 708812DL 70.00 88.00 12.00
OS 60789 60.00 78.00 9.00 OS 709010* 70.00 90.00 10.00
Oil
Oil Seals
OS 607810 60.00 78.00 10.00 OS 709012* 70.00 90.00 12.00
OS 607813 60.00 78.00 13.00 OS 709013* 70.00 90.00 13.00
Seals
OS 60807DL 60.00 80.00 7.00 OS 709510 70.00 95.00 10.00
OS 60808* 60.00 80.00 8.00 OS 709513* 70.00 95.00 13.00
OS 60809DL 60.00 80.00 9.00 OS 701006 70.00 100.00 6.00
OS 608010* 60.00 80.00 10.00 OS 7010010* 70.00 100.00 10.00
OS 608212* 60.00 82.00 12.00 OS 7010012 70.00 100.00 12.00
OS 60858DL 60.00 85.00 8.00 OS 7010513 70.00 105.00 13.00
OS 608510DL 60.00 85.00 10.00 OS 701108* 70.00 110.00 8.00
OS 60908* 60.00 90.00 8.00 OS 7011010DL 70.00 110.00 10.00
OS 609010* 60.00 90.00 10.00 OS 7011012 70.00 110.00 12.00
OS 609013 60.00 90.00 13.00 OS 7011013DL 70.00 110.00 13.00
OS 609510 60.00 95.00 10.00 OS 7012512DL 70.00 125.00 12.00
OS 6010010 60.00 100.00 10.00 OS 72867DL 72.00 86.00 7.00
OS 6010013 60.00 100.00 13.00 OS 729010DL 72.00 90.00 10.00
OS 6011010DL 60.00 110.00 10.00 OS 729510 72.00 95.00 10.00
OS 628010 62.00 80.00 10.00 OS 7210010DL 72.00 100.00 10.00
OS 62858DL 62.00 85.00 8.00 OS 75908DL 75.00 90.00 8.00
OS 628510* 62.00 85.00 10.00 OS 759010* 75.00 90.00 10.00
OS 628512 62.00 85.00 12.00 OS 75958DL 75.00 95.00 8.00
OS 629010 62.00 90.00 10.00 OS 759510* 75.00 95.00 10.00
OS 6210010 62.00 100.00 10.00 OS 759512 75.00 95.00 12.00
OS 63809DL 63.00 80.00 9.00 OS 759512DL 75.00 95.00 12.00
OS 638510* 63.00 85.00 10.00 OS 7510010* 75.00 100.00 10.00
OS 639010 63.00 90.00 10.00 OS 7510012* 75.00 100.00 12.00
OS 64808 64.00 80.00 8.00 OS 7510013* 75.00 100.00 13.00
OS 65758DL 65.00 75.00 8.00 OS 7510513DL 75.00 105.00 13.00
OS 65808* 65.00 80.00 8.00 OS 7511012 75.00 110.00 12.00
OS 658010* 65.00 80.00 10.00 OS 7511013DL 75.00 110.00 13.00
OS 65858 65.00 85.00 8.00 OS 7511510 75.00 115.00 10.00
OS 658510* 65.00 85.00 10.00 OS 7511512 75.00 115.00 12.00
OS 658512* 65.00 85.00 12.00 OS 7512012 75.00 120.00 12.00
OS 658513DL 65.00 85.00 13.00 OS 769510 76.00 95.00 10.00
OS 658812DL 65.00 88.00 12.00 OS 7810010 78.00 100.00 10.00
OS 659010* 65.00 90.00 10.00 OS 7810513 78.00 105.00 13.00
OS 659012DL 65.00 90.00 12.00 OS 80958 80.00 95.00 8.00
OS 659013* 65.00 90.00 13.00 OS 801007DL 80.00 100.00 7.00
OS 659510* 65.00 95.00 10.00 OS 8010010* 80.00 100.00 10.00
OS 6510010* 65.00 100.00 10.00 OS 8010012DL 80.00 100.00 12.00
OS 6510012 65.00 100.00 12.00 OS 8010013* 80.00 100.00 13.00
OS 6512012 65.00 120.00 12.00 OS 8010510 80.00 105.00 10.00
OS 689010* 68.00 90.00 10.00 OS 8010513DL 80.00 105.00 13.00
OS 689012 68.00 90.00 12.00 OS 8011010* 80.00 110.00 10.00
OS 689510 68.00 95.00 10.00 OS 8011012 80.00 110.00 12.00
OS 6810010 68.00 100.00 10.00 OS 8011510 80.00 115.00 10.00
OS 70858* 70.00 85.00 8.00 OS 8012013DL 80.00 120.00 13.00
OS 708510DL 70.00 85.00 10.00 OS 8410013 84.00 100.00 13.00
HITECHSEALS.COM 265
Nitrile
A B C A B C
OS 851009 85.00 100.00 9.00 OS 10014012 100.00 140.00 12.00
OS 8510012* 85.00 100.00 12.00 OS 10015012 100.00 150.00 12.00
Oil Seals
Seals
OS 8510510* 85.00 105.00 10.00 OS 10015013 100.00 150.00 13.00

OS 8510512 85.00 105.00 12.00 OS 10213513 102.00 135.00 13.00
OS 8510513 85.00 105.00 13.00 OS 10512510 105.00 125.00 10.00
OS 8511010 85.00 110.00 10.00 OS 10512513DL 105.00 125.00 13.00
Oil
OS 8511012* 85.00 110.00 12.00 OS 10513012* 105.00 130.00 12.00

OS 8511013* 85.00 110.00 13.00 OS 10513013* 105.00 130.00 13.00
OS 8512012* 85.00 120.00 12.00 OS 10513513 105.00 135.00 13.00
OS 8513012* 85.00 130.00 12.00 OS 10514012* 105.00 140.00 12.00
OS 8514012DL 85.00 140.00 12.00 OS 11012513 110.00 125.00 13.00
OS 8515012 85.00 150.00 12.00 OS 1101308 110.00 130.00 8.00
OS 8811010 88.00 110.00 10.00 OS 11013012* 110.00 130.00 12.00
OS 8811012 88.00 110.00 12.00 OS 11013013* 110.00 130.00 13.00
OS 9010513 90.00 105.00 13.00 OS 11013512 110.00 135.00 12.00
OS 901108 90.00 110.00 8.00 OS 11013513 110.00 135.00 13.00
OS 9011012DL 90.00 110.00 12.00 OS 11014012* 110.00 140.00 12.00
OS 9011013* 90.00 110.00 13.00 OS 11014013* 110.00 140.00 13.00
OS 901159 90.00 115.00 9.00 OS 11014014DL 110.00 140.00 14.00
OS 9011513* 90.00 115.00 13.00 OS 11014515 110.00 145.00 15.00
OS 9012012* 90.00 120.00 12.00 OS 11015013* 110.00 150.00 13.00
OS 9012013DL 90.00 120.00 13.00 OS 11015015 110.00 150.00 15.00
OS 9012512DL 90.00 125.00 12.00 OS 11017012DL 110.00 170.00 12.00
OS 9012513 90.00 125.00 13.00 OS 11214013DL 112.00 140.00 13.00
OS 9013013* 90.00 130.00 13.00 OS 11513012 115.00 130.00 12.00
OS 9511010DL 95.00 110.00 10.00 OS 11513514DL 115.00 135.00 14.00
OS 9511512DL 95.00 115.00 12.00 OS 11514010 115.00 140.00 10.00
OS 9511513DL 95.00 115.00 13.00 OS 11514012 115.00 140.00 12.00
OS 9512012 95.00 120.00 12.00 OS 11514012DL 115.00 140.00 12.00
OS 9512012DL 95.00 120.00 12.00 OS 11514013* 115.00 140.00 13.00
OS 9512013* 95.00 120.00 13.00 OS 11514514* 115.00 145.00 14.00
OS 9512512* 95.00 125.00 12.00 OS 11515012 115.00 150.00 12.00
OS 9512513 95.00 125.00 13.00 OS 11516015 115.00 160.00 15.00
OS 9513012* 95.00 130.00 12.00 OS 11815012DL 118.00 150.00 12.00
OS 9513013* 95.00 130.00 13.00 OS 12014010 120.00 140.00 10.00
OS 9513513 95.00 135.00 13.00 OS 12014013* 120.00 140.00 13.00
OS 9811512DL 98.00 115.00 12.00 OS 12014512 120.00 145.00 12.00
OS 9812513 98.00 125.00 13.00 OS 12015012* 120.00 150.00 12.00
OS 1001159 100.00 115.00 9.00 OS 12015013 120.00 150.00 13.00
OS 10012012* 100.00 120.00 12.00 OS 12015014DL 120.00 150.00 14.00
OS 10012013 100.00 120.00 13.00 OS 12015015* 120.00 150.00 15.00
OS 10012512* 100.00 125.00 12.00 OS 12016012* 120.00 160.00 12.00
OS 10012513DL 100.00 125.00 13.00 OS 12515012* 125.00 150.00 12.00
OS 10012515 100.00 125.00 15.00 OS 12515015 125.00 150.00 15.00
OS 10012713 100.00 127.00 13.00 OS 12516012 125.00 160.00 12.00
OS 10013010 100.00 130.00 10.00 OS 12516015 125.00 160.00 15.00
OS 10013012* 100.00 130.00 12.00 OS 12815013 128.00 150.00 13.00
OS 10014012 100.00 140.00 12.00 OS 13015010DL 130.00 150.00 10.00
OS 10013012* 100.00 130.00 12.00 OS 13015012DL 130.00 150.00 12.00
266 HITECHSEALS.COM
Nitrile
A B C A B C
OS 13016012* 130.00 160.00 12.00 OS 18021515DL 180.00 215.00 15.00
OS 13016013 130.00 160.00 13.00 OS 18021516 180.00 215.00 16.00
Oil
Oil Seals
OS 13016015* 130.00 160.00 15.00 OS 18022015* 180.00 220.00 15.00
OS 13016515 130.00 165.00 15.00 OS 18521013* 185.00 210.00 13.00
Seals
OS 13017012 130.00 170.00 12.00 OS 18521515 185.00 215.00 15.00
OS 13516012 135.00 160.00 12.00 OS 18521516 185.00 215.00 16.00
OS 13516013 135.00 160.00 13.00 OS 19021516DL 190.00 215.00 16.00
OS 13516015 135.00 160.00 15.00 OS 19022012 190.00 220.00 12.00
OS 13517012DL 135.00 170.00 12.00 OS 19022015* 190.00 220.00 15.00
OS 14016013* 140.00 160.00 13.00 OS 19022016 190.00 220.00 16.00
OS 14016015 140.00 160.00 15.00 OS 19022515* 190.00 225.00 15.00
OS 14016515DL 140.00 165.00 15.00 OS 19022516* 190.00 225.00 16.00
OS 14017012* 140.00 170.00 12.00 OS 19023015DL 190.00 230.00 15.00
OS 14017013 140.00 170.00 13.00 OS 20022515 200.00 225.00 15.00
OS 14017014DL 140.00 170.00 14.00 OS 20023013 200.00 230.00 13.00
OS 14017015* 140.00 170.00 15.00 OS 20023015* 200.00 230.00 15.00
OS 14018012 140.00 180.00 12.00 OS 20024015 200.00 240.00 15.00
OS 14416012 144.00 160.00 12.00 OS 20025015 200.00 250.00 15.00
OS 14516713DL 145.00 167.00 13.00 OS 20523015 205.00 230.00 15.00
OS 14517015 145.00 170.00 15.00 OS 21024015* 210.00 240.00 15.00
OS 14517515* 145.00 175.00 15.00 OS 21025015 210.00 250.00 15.00
OS 14518012 145.00 180.00 12.00 OS 21524012 215.00 240.00 12.00
OS 14518015DL 145.00 180.00 15.00 OS 21525016 215.00 250.00 16.00
OS 15017015 150.00 170.00 15.00 OS 22025014 220.00 250.00 14.00
OS 15018012 150.00 180.00 12.00 OS 22025015* 220.00 250.00 15.00
OS 15018013 150.00 180.00 13.00 OS 22025516 220.00 255.00 16.00
OS 15018015* 150.00 180.00 15.00 OS 22026015 220.00 260.00 15.00
OS 15517412 155.00 174.00 12.00 OS 23026015* 230.00 260.00 15.00
OS 15518015* 155.00 180.00 15.00 OS 23026020DL 230.00 260.00 20.00
OS 15519015 155.00 190.00 15.00 OS 23027015 230.00 270.00 15.00
OS 15818015 158.00 180.00 15.00 OS 23028015 230.00 280.00 15.00
OS 16018510 160.00 185.00 10.00 OS 24027015* 240.00 270.00 15.00
OS 16019013* 160.00 190.00 13.00 OS 24028015 240.00 280.00 15.00
OS 16019015* 160.00 190.00 15.00 OS 25028015 250.00 280.00 15.00
OS 16019617 160.00 196.00 17.00 OS 25029016 250.00 290.00 16.00
OS 16020012 160.00 200.00 12.00 OS26030020 260.00 300.00 20.00
OS 16020014 160.00 200.00 14.00 OS 27031015 270.00 310.00 15.00
OS 16020015DL 160.00 200.00 15.00 OS 28032020* 280.00 320.00 20.00
OS 16519013 165.00 190.00 13.00 OS 28532516 285.00 325.00 16.00
OS 16519015DL 165.00 190.00 15.00 OS 29033018* 290.00 330.00 18.00
OS 16520015 165.00 200.00 15.00 OS 30034016 300.00 340.00 16.00
OS 17019013 170.00 190.00 13.00 OS 30034020DL 300.00 340.00 20.00
OS 17020012 170.00 200.00 12.00 OS 32036018DL 320.00 360.00 18.00
OS 17020015* 170.00 200.00 15.00 OS 40044020 400.00 440.00 20.00
OS 17021015DL 170.00 210.00 15.00 OS 42046020 420.00 460.00 20.00
OS 17520015 175.00 200.00 15.00
OS 18020015* 180.00 200.00 15.00
OS 18020016DL 180.00 200.00 16.00
OS 18021015* 180.00 210.00 15.00
HITECHSEALS.COM 267
Fluorocarbon C
0.635 R Max.
Oil Seals
Seals
B A
Oil
15-30°

A B C A B C
OSV 6166DL 6.00 16.00 6.00 OSV 17357 17.00 35.00 7.00
OSV 6167 6.00 16.00 7.00 OSV 17407DL 17.00 40.00 7.00
OSV 6227DL 6.00 22.00 7.00 OSV 18287* 18.00 28.00 7.00
OSV 7227DL 7.00 22.00 7.00 OSV 18307* 18.00 30.00 7.00
OSV 8167 8.00 16.00 7.00 OSV 18327 18.00 32.00 7.00
OSV 8227* 8.00 22.00 7.00 OSV 18357DL 18.00 35.00 7.00
OSV 10165 10.00 16.00 5.00 OSV 18407 18.00 40.00 7.00
OSV 10197* 10.00 19.00 7.00 OSV 20307* 20.00 30.00 7.00
OSV 10227DL 10.00 22.00 7.00 OSV 20327 20.00 32.00 7.00
OSV 11227DL 11.00 22.00 7.00 OSV 20357* 20.00 35.00 7.00
OSV 12195 12.00 19.00 5.00 OSV 20407* 20.00 40.00 7.00
OSV 12227* 12.00 22.00 7.00 OSV 204010 20.00 40.00 10.00
OSV 12287* 12.00 28.00 7.00 OSV 20427DL 20.00 42.00 7.00
OSV 12307DL 12.00 30.00 7.00 OSV 20477* 20.00 47.00 7.00
OSV 14247DL 14.00 24.00 7.00 OSV 205210DL 20.00 52.00 10.00
OSV 15247* 15.00 24.00 7.00 OSV 21338DL 21.00 33.00 8.00
OSV 15257 15.00 25.00 7.00 OSV 22327DL 22.00 32.00 7.00
OSV 15267* 15.00 26.00 7.00 OSV 22357* 22.00 35.00 7.00
OSV 15307* 15.00 30.00 7.00 OSV 22407* 22.00 40.00 7.00
OSV 153010 15.00 30.00 10.00 OSV 22477DL 22.00 47.00 7.00
OSV 15327* 15.00 32.00 7.00 OSV 24407* 24.00 40.00 7.00
OSV 16287DL 16.00 28.00 7.00 OSV 25324 25.00 32.00 4.00
OSV 16307 16.00 30.00 7.00 OSV 25326DL 25.00 32.00 6.00
OSV 17287* 17.00 28.00 7.00 OSV 25357* 25.00 35.00 7.00
OSV 17288 17.00 28.00 8.00 OSV 25387DL 25.00 38.00 7.00
OSV 17307* 17.00 30.00 7.00 OSV 25407* 25.00 40.00 7.00
OSV 17327* 17.00 32.00 7.00 OSV 25408DL 25.00 40.00 8.00
268 HITECHSEALS.COM
Fluorocarbon
A B C A B C
OSV 25427DL 25.00 42.00 7.00 OSV 35557DL 35.00 55.00 7.00
OSV 25457DL 25.00 45.00 7.00 OSV 355510DL 35.00 55.00 10.00
Oil
Oil Seals
OSV 254510 25.00 45.00 10.00 OSV 355610 35.00 56.00 10.00
OSV 25477* 25.00 47.00 7.00 OSV 35627DL 35.00 62.00 7.00
Seals
OSV 25507DL 25.00 50.00 7.00 OSV 35727DL 35.00 72.00 7.00
OSV 25527* 25.00 52.00 7.00 OSV 357210 35.00 72.00 10.00
OSV 26427DL 26.00 42.00 7.00 OSV 36507DL 36.00 50.00 7.00
OSV 26477DL 26.00 47.00 7.00 OSV 36527DL 36.00 52.00 7.00
OSV 28387* 28.00 38.00 7.00 OSV 38507* 38.00 50.00 7.00
OSV 28407 28.00 40.00 7.00 OSV 38527* 38.00 52.00 7.00
OSV 28458 28.00 45.00 8.00 OSV 38557DL 38.00 55.00 7.00
OSV 28477* 28.00 47.00 7.00 OSV 38607DL 38.00 60.00 7.00
OSV 28527DL 28.00 52.00 7.00 OSV 38627DL 38.00 62.00 7.00
OSV 30407* 30.00 40.00 7.00 OSV 40527* 40.00 52.00 7.00
OSV 30427* 30.00 42.00 7.00 OSV 40557* 40.00 55.00 7.00
OSV 30457DL 30.00 45.00 7.00 OSV 406010* 40.00 60.00 10.00
OSV 30458 30.00 45.00 8.00 OSV 40627* 40.00 62.00 7.00
OSV 30477* 30.00 47.00 7.00 OSV 406210* 40.00 62.00 10.00
OSV 30507DL 30.00 50.00 7.00 OSV 40727DL 40.00 72.00 7.00
OSV 30508 30.00 50.00 8.00 OSV 408010 40.00 80.00 10.00
OSV 305010 30.00 50.00 10.00 OSV 42557DL 42.00 55.00 7.00
OSV 30527* 30.00 52.00 7.00 OSV 42567 42.00 56.00 7.00
OSV 305510 30.00 55.00 10.00 OSV 42628* 42.00 62.00 8.00
OSV 30627* 30.00 62.00 7.00 OSV 42658 42.00 65.00 8.00
OSV 32427DL 32.00 42.00 7.00 OSV 42728DL 42.00 72.00 8.00
OSV 32457 32.00 45.00 7.00 OSV 44658DL 44.00 65.00 8.00
OSV 32477* 32.00 47.00 7.00 OSV 45524 45.00 52.00 4.00
OSV 32507DL 32.00 50.00 7.00 OSV 45608DL 45.00 60.00 8.00
OSV 32527* 32.00 52.00 7.00 OSV 45628* 45.00 62.00 8.00
OSV 326210 32.00 62.00 10.00 OSV 456212 45.00 62.00 12.00
OSV 35457* 35.00 45.00 7.00 OSV 45658* 45.00 65.00 8.00
OSV 35477* 35.00 47.00 7.00 OSV 456510DL 45.00 65.00 10.00
OSV 35487DL 35.00 48.00 7.00 OSV 45728* 45.00 72.00 8.00
OSV 35507* 35.00 50.00 7.00 OSV 458010 45.00 80.00 10.00
OSV 35508DL 35.00 50.00 8.00 OSV 459010DL 45.00 90.00 10.00
OSV 355010 35.00 50.00 10.00 OSV 48628* 48.00 62.00 8.00
OSV 35526DL 35.00 52.00 6.00 OSV 48658DL 48.00 65.00 8.00
OSV 35527* 35.00 52.00 7.00 OSV 48688DL 48.00 68.00 8.00
OSV 35528DL 35.00 52.00 8.00 OSV 486910 48.00 69.00 10.00
OSV 355210DL 35.00 52.00 10.00 OSV 48728DL 48.00 72.00 8.00
OSV 355410 35.00 54.00 10.00 OSV 48758 48.00 75.00 8.00
HITECHSEALS.COM 269
Fluorocarbon
A B C A B C
OSV 50658DL 50.00 65.00 8.00 OSV 709013 70.00 90.00 13.00
Oil Seals
OSV 50688* 50.00 68.00 8.00 OSV 709510 70.00 95.00 10.00
Seals
OSV 507010 50.00 70.00 10.00 OSV 7010010DL 70.00 100.00 10.00
OSV 50727DL 50.00 72.00 7.00 OSV 7011013 70.00 110.00 13.00
OSV 50728* 50.00 72.00 8.00 OSV 7210010DL 72.00 100.00 10.00
Oil
OSV 507510* 50.00 75.00 10.00 OSV 759010DL 75.00 90.00 10.00
OSV 50808DL 50.00 80.00 8.00 OSV 759510* 75.00 95.00 10.00
OSV 52688* 52.00 68.00 8.00 OSV 759512 75.00 95.00 12.00
OSV 52728* 52.00 72.00 8.00 OSV 7510010* 75.00 100.00 10.00
OSV 55708 55.00 70.00 8.00 OSV 7512512DL 75.00 125.00 12.00
OSV 557010DL 55.00 70.00 10.00 OSV 7810010* 78.00 100.00 10.00
OSV 55728* 55.00 72.00 8.00 OSV 8010010* 80.00 100.00 10.00
OSV 557210DL 55.00 72.00 10.00 OSV 8010012 80.00 100.00 12.00
OSV 55758* 55.00 75.00 8.00 OSV 8010013* 80.00 100.00 13.00
OSV 557810 55.00 78.00 10.00 OSV 8011010DL 80.00 110.00 10.00
OSV 55808DL 55.00 80.00 8.00 OSV 8510512DL 85.00 105.00 12.00
OSV 558010DL 55.00 80.00 10.00 OSV 8511012DL 85.00 110.00 12.00
OSV 558510DL 55.00 85.00 10.00 OSV 8511013 85.00 110.00 13.00
OSV 559010 55.00 90.00 10.00 OSV 8512012DL 85.00 120.00 12.00
OSV 56708 56.00 70.00 8.00 OSV 9010013DL 90.00 100.00 13.00
OSV 56808DL 56.00 80.00 8.00 OSV 9011012DL 90.00 110.00 12.00
OSV 58728 58.00 72.00 8.00 OSV 9011512* 90.00 115.00 12.00
OSV 60758* 60.00 75.00 8.00 OSV 9011513 90.00 115.00 13.00
OSV 60808* 60.00 80.00 8.00 OSV 9012012 90.00 120.00 12.00
OSV 608010* 60.00 80.00 10.00 OSV 9212013 92.00 120.00 13.00
OSV 60858DL 60.00 85.00 8.00 OSV 9511010 95.00 110.00 10.00
OSV 608510DL 60.00 85.00 10.00 OSV 9511513DL 95.00 115.00 13.00
OSV 60908 60.00 90.00 8.00 OSV 9512012DL 95.00 120.00 12.00
OSV 628510* 62.00 85.00 10.00 OSV 9512013DL 95.00 120.00 13.00
OSV 629010 62.00 90.00 10.00 OSV 9512512DL 95.00 125.00 12.00
OSV 638510* 63.00 85.00 10.00 OSV 10012012* 100.00 120.00 12.00
OSV 639010DL 63.00 90.00 10.00 OSV 10012512* 100.00 125.00 12.00
OSV 658510* 65.00 85.00 10.00 OSV 10013012* 100.00 130.00 12.00
OSV 658512 65.00 85.00 12.00 OSV 10014013 100.00 140.00 13.00
OSV 658513DL 65.00 85.00 13.00 OSV 10512513DL 105.00 125.00 13.00
OSV 659010* 65.00 90.00 10.00 OSV 10513012* 105.00 130.00 12.00
OSV 6510010DL 65.00 100.00 10.00 OSV 10514012 105.00 140.00 12.00
OSV 689010* 68.00 90.00 10.00 OSV 1101308 110.00 130.00 8.00
OSV 70858 70.00 85.00 8.00 OSV 11013012* 110.00 130.00 12.00
OSV 708810DL 70.00 88.00 10.00 OSV 11014012DL 110.00 140.00 12.00
OSV 709010* 70.00 90.00 10.00 OSV 11514012* 115.00 140.00 12.00
270 HITECHSEALS.COM
Fluorocarbon
A B C A B C
OSV 13517015 135.00 170.00 15.00 OSV 22025015 220.00 250.00 15.00
Oil
OSV 14016512 140.00 165.00 12.00 OSV 22025518* 220.00 255.00 18.00
Oil Seals
OSV 14017012 140.00 170.00 12.00 OSV 24027015DL 240.00 270.00 15.00
Seals
OSV 14017013 140.00 170.00 13.00 OSV 25028015 250.00 280.00 15.00
OSV 14017015DL 140.00 170.00 15.00 OSV 36040018 360.00 400.00 18.00
OSV 14018015 140.00 180.00 15.00 OSV 42047020DL 420.00 470.00 20.00
OSV 14517515DL 145.00 175.00 15.00 OSV 11815012DL 118.00 150.00 12.00
OSV 15018012 150.00 180.00 12.00 OSV 12014013DL 120.00 140.00 13.00
OSV 15018015DL 150.00 180.00 15.00 OSV 12015012* 120.00 150.00 12.00
OSV 16018010DL 160.00 180.00 10.00 OSV 12015013* 120.00 150.00 13.00
OSV 16018510 160.00 185.00 10.00 OSV 12016012DL 120.00 160.00 12.00
OSV 16019015DL 160.00 190.00 15.00 OSV 12514513 125.00 145.00 13.00
OSV 17020015DL 170.00 200.00 15.00 OSV 12515012* 125.00 150.00 12.00
OSV 17520515 175.00 205.00 15.00 OSV 12516012DL 125.00 160.00 12.00
OSV 18021015DL 180.00 210.00 15.00 OSV 13016012DL 130.00 160.00 12.00
OSV 18520510DL 185.00 205.00 10.00 OSV 13016015DL 130.00 160.00 15.00
OSV 18521013DL 185.00 210.00 13.00 OSV 13017012* 130.00 170.00 12.00
OSV 19022015 190.00 220.00 15.00 OSV 13516015DL 135.00 160.00 15.00
OSV 19023016DL 190.00 230.00 16.00 OSV 13516512 135.00 165.00 12.00
OSV 20023015DL 200.00 230.00 15.00 OSV 13517012 135.00 170.00 12.00
OSV 21024015 210.00 240.00 15.00
Additional sizes available upon request.
HITECHSEALS.COM 271
SA2 Style 0.635 R Max.

C
B A
Oil Seals
Oil Seals
15-30°
A B C A B C
OS 173210SA2 17.00 32.00 10.00 OS 10014013SA2 100.00 140.00 13.00
OS 203510SA2 20.00 35.00 10.00 OS 10512513SA2 105.00 125.00 13.00
OS 234210SA2 23.00 42.00 10.00 OS 10513015SA2 105.00 130.00 15.00
OS 25409SA2 25.00 40.00 9.00 OS 11013012SA2 110.00 130.00 12.00
OS 264210SA2 26.00 42.00 10.00 OS 11013015SA2 110.00 130.00 15.00
OS 304610SA2 30.00 46.00 10.00 OS 12014013SA2 120.00 140.00 13.00
OS 355212SA2 35.00 52.00 12.00 OS 12015013SA2 120.00 150.00 13.00
OS 355610SA2 35.00 56.00 10.00 OS 12415015SA2 124.00 150.00 15.00
OS 407212SA2 40.00 72.00 12.00 OS 12515015SA2 125.00 150.00 15.00
OS 409012SA2 40.00 90.00 12.00 OS 13015010SA2 130.00 150.00 10.00
OS 506510SA2 50.00 65.00 10.00 OS 13015510SA2 130.00 155.00 10.00
OS 507010SA2 50.00 70.00 10.00 OS 13016015SA2 130.00 160.00 15.00
OS 508513SA2 50.00 85.00 13.00 OS 14016512SA2 140.00 165.00 12.00
OS 526812SA2 52.00 68.00 12.00 OS 14517515SA2 145.00 175.00 15.00
OS 548010SA2 54.00 80.00 10.00 OS 14817015SA2 148.00 170.00 15.00
OS 558010SA2 55.00 80.00 10.00 OS 15019015SA2 150.00 190.00 15.00
OS 558012SA2 55.00 80.00 12.00 OS 15518015SA2 155.00 180.00 15.00
OS 5510013SA2 55.00 100.00 13.00 OS 16020015SA2 160.00 200.00 15.00
OS 568010SA2 56.00 80.00 10.00 OS 16519015SA2 165.00 190.00 15.00
OS 587512SA2 58.00 75.00 12.00 OS 16820015SA2 168.00 200.00 15.00
OS 608013SA2 60.00 80.00 13.00 OS 17019015SA2 170.00 190.00 15.00
OS 6510013SA2 65.00 100.00 13.00 OS 18022016SA2 180.00 220.00 16.00
OS 709012SA2 70.00 90.00 12.00 OS 18521515SA2 185.00 215.00 15.00
OS 7010513SA2 70.00 105.00 13.00 OS 19023016SA2 190.00 230.00 16.00
OS 7510013SA2 75.00 100.00 13.00 OS 20023016SA2 200.00 230.00 16.00
OS 8010010SA2 80.00 100.00 10.00 OS 26028016SA2 260.00 280.00 16.00
OS 8011010SA2 80.00 110.00 10.00 OS 29033018SA2 290.00 330.00 18.00
OS 8510513SA2 85.00 105.00 13.00 OS 34038020SA2 340.00 380.00 20.00
OS 8512513SA2 85.00 125.00 13.00 OS 35039018SA2 350.00 390.00 18.00
OS 901159SA2 90.00 115.00 9.00 OS 44048020SA2 440.00 480.00 20.00
OS 9012013SA2 90.00 120.00 13.00 OS 50054020SA2 500.00 540.00 20.00
OS 10012513SA2 100.00 125.00 13.00 OS 71076020SA2 710.00 760.00 20.00
272 HITECHSEALS.COM
C
0.635 R Max. VC Style
A B
Oil
Oil Seals
Seals
15-30°
A B C A B C
OS 8163VC 8.00 16.00 3.00 OS 25354VC 25.00 35.00 4.00
OS 12183VC 12.00 18.00 3.00 OS 28374VC 28.00 37.00 4.00
OS 13193VC 13.00 19.00 3.00 OS 30374VC 30.00 37.00 4.00
OS 14203VC 14.00 20.00 3.00 OS 30404VC 30.00 40.00 4.00
OS 14213VC 14.00 21.00 3.00 OS 32424VC 32.00 42.00 4.00
OS 16223VC 16.00 22.00 3.00 OS 33403VC 33.00 40.00 3.00
OS 18243VC 18.00 24.00 3.00 OS 35424VC 35.00 42.00 4.00
OS 18244VC 18.00 24.00 4.00 OS 37474VC 37.00 47.00 4.00
OS 18253VC 18.00 25.00 3.00 OS 38484VC 38.00 48.00 4.00
OS 19274VC 19.00 27.00 4.00 OS 40474VC 40.00 47.00 4.00
OS 20264VC 20.00 26.00 4.00 OS 40504VC 40.00 50.00 4.00
OS 202845VC 20.00 28.00 4.50 OS 40525VC 40.00 52.00 5.00
OS 21294VC 21.00 29.00 4.00 OS 45524VC 45.00 52.00 4.00
OS 24324VC 24.00 32.00 4.00 OS 50584VC 50.00 58.00 4.00
OS 243865VC 24.00 38.00 6.50 OS 55635VC 55.00 63.00 5.00
OS 25334VC 25.00 33.00 4.00
HITECHSEALS.COM 273
High Pressure Seal (BABSL) C

0.635 R Max.
Oil Seals
Seals
B A
Oil
15-30°
High pressure double lip oil seal, rated at 145 PSI (10 Bar). The BAB
oil seal is used in applications where pressure is above 5 PSI but
not more than 145 PSI.
A B C A B C
BAB 12226 12.00 22.00 6.00 BAB 47627 47.00 62.00 7.00
BAB 17306 17.00 30.00 6.00 BAB 487012 48.00 70.00 12.00
BAB 17358 17.00 35.00 8.00 BAB 50687 50.00 68.00 7.00
BAB 18306 18.00 30.00 6.00 BAB 507010 50.00 70.00 10.00
BAB 18307 18.00 30.00 7.00 BAB 50727 50.00 72.00 7.00
BAB 20307 20.00 30.00 7.00 BAB 50727V 50.00 72.00 7.00
BAB 20356 20.00 35.00 6.00 BAB 55687 55.00 68.00 7.00
BAB 22356 22.00 35.00 6.00 BAB 55708 55.00 70.00 8.00
BAB 22356V 22.00 35.00 6.00 BAB 55727 55.00 72.00 7.00
BAB 24356 24.00 35.00 6.00 BAB 55727V 55.00 72.00 7.00
BAB 25356 25.00 35.00 6.00 BAB 60807 60.00 80.00 7.00
BAB 25426 25.00 42.00 6.00 BAB 60807V 60.00 80.00 7.00
BAB 26377 26.00 37.00 7.00 BAB 608212 60.00 82.00 12.00
BAB 26405 26.00 40.00 5.00 BAB 62857 62.00 85.00 7.00
BAB 30407 30.00 40.00 7.00 BAB 65807 65.00 80.00 7.00
BAB 30426 30.00 42.00 6.00 BAB 70907 70.00 90.00 7.00
BAB 305011 30.00 50.00 11.00 BAB 70907V 70.00 90.00 7.00
BAB 35526 35.00 52.00 6.00 BAB 801007 80.00 100.00 7.00
BAB 40527 40.00 52.00 7.00 BAB 8510575 85.00 105.00 7.50
BAB 40556 40.00 55.00 6.00 BAB 901107 90.00 110.00 7.00
BAB 40626V 40.00 62.00 6.00 BAB 9011012 90.00 110.00 12.00
BAB 42627 42.00 62.00 7.00 BAB 10012075 100.00 120.00 7.50
BAB 42627V 42.00 62.00 7.00 BAB 10012075V 100.00 120.00 7.50
BAB 45627 45.00 62.00 7.00 BAB 10513075 105.00 130.00 7.50
BAB 45627V 45.00 62.00 7.00 BAB 13016012 130.00 160.00 12.00
BAB 45656 45.00 65.00 6.00 BAB 14016010 140.00 160.00 10.00
BAB 45657 45.00 65.00 7.00 BAB 16018585 160.00 185.00 8.50
BAB 45657V 45.00 65.00 7.00 BAB 20023013 200.00 230.00 13.00
BAB 456812 45.00 68.00 12.00 BAB 24027085 240.00 270.00 8.50
274 HITECHSEALS.COM
C
0.635 R Max.
L1M Style
Oil
Oil Seals
A B
Seals
15-30°
The standard materials for an L1M is a steel outer case, a steel

filler ring, a stainless steel finger spring, and a nitrile/PTFE sealing
element. The sealing element is also available in hydrogenated
nitrile/PTFE and fluorocarbon/PTFE.
Metric Imperial Equivalent

A B C A B C
Part Number Dia. Dia. Width Dia. Dia. Width Garlock Ref. #
OS 14017015L1M 140.00 170.00 15.00 5.512 6.693 0.591 53X-2990
OS 15017015L1M 150.00 170.00 15.00 5.906 6.693 0.591 53X-3121
OS 15018013L1M 150.00 180.00 13.00 5.906 7.087 0.512 53X-3124
OS 18022016L1M 180.00 220.00 16.00 7.087 8.661 0.630 53X-3075
OS 20024020L1M 200.00 240.00 20.00 7.874 9.449 0.787 53X-3013
OS 22026016L1M 220.00 260.00 16.00 8.661 10.236 0.630 53X-3074
OS 24028020L1M 240.00 280.00 20.00 9.449 11.024 0.787 53X-3015
OS 26030420L1M 260.00 304.00 20.00 10.236 11.969 0.787 53X-3076
OS 27531918L1M 275.00 319.00 18.00 10.827 12.559 0.709 53X-3078
OS 275319519L1M 275.00 319.50 19.00 10.827 12.579 0.748 53X-3096
OS 31035015L1M 310.00 350.00 18.00 12.205 13.780 0.709 53X-3115
OS 32036418L1M 320.00 364.00 18.00 12.598 14.331 0.709 53X-3079
OS 32036420L1M 320.00 364.00 20.00 12.598 14.331 0.787 53X-3080
OS 33037018L1M 330.00 370.00 18.00 12.992 14.567 0.709 53X-3007
OS 34038018L1M 340.00 380.00 18.00 13.386 14.961 0.709 53X-3036
OS 34038020L1M 340.00 380.00 20.00 13.386 14.961 0.787 53X-3116
OS 37039012L1M 370.00 390.00 12.00 14.567 15.354 0.472 53X-4105
OS 39043016L1M 390.00 430.00 16.00 15.354 16.929 0.630 53X-4616
OS 40044020L1M 400.00 440.00 20.00 15.748 17.323 0.787 53X-3038
OS 42046020L1M 420.00 460.00 20.00 16.535 18.110 0.787 53X-3010
OS 44048020L1M 440.00 480.00 20.00 17.323 18.898 0.787 53X-4192
OS 47052022L1M 470.00 520.00 22.00 18.504 20.472 0.866 53X-3029
OS 47053020L1M 470.00 530.00 20.00 18.504 20.866 0.787 53X-3062
OS 48553519L1M 485.00 535.00 19.00 19.094 21.063 0.748 53X-4220
OS 50055019L1M 500.00 550.00 19.00 19.685 21.654 0.748 53X-4232
OS 52057022L1M 520.00 570.00 22.00 20.472 22.441 0.866 53X-3027
OS 56061020L1M 560.00 610.00 20.00 22.047 24.016 0.787 53X-7266
HITECHSEALS.COM 275
L1M Style
Seals
OilSeals
Oil

A B C A B C
Part Number Dia. Dia. Width Dia. Dia. Width Garlock Ref. #
OS 56560120L1M 565.00 601.00 20.00 22.244 23.661 0.787 53X-9995
OS 57063020L1M 570.00 630.00 20.00 22.441 24.803 0.787 53X-3061
OS 58062020L1M 580.00 620.00 20.00 22.835 24.409 0.787 53X-3053
OS 60064020L1M 600.00 640.00 20.00 23.622 25.197 0.787 53X-8624
OS 63067020L1M 630.00 670.00 20.00 24.803 26.378 0.787 53X-3020
OS 63069020L1M 630.00 690.00 20.00 24.803 27.165 0.787 53X-3059
OS 64068020L1M 640.00 680.00 20.00 25.197 26.772 0.787 53X-3019
OS 65071425L1M 650.00 714.00 25.00 25.591 28.110 0.984 53X-3016
OS 67072022L1M 670.00 720.00 22.00 26.378 28.346 0.866 53X-3081
OS 69073020L1M 690.00 730.00 20.00 27.165 28.740 0.787 53X-3054
OS 70076425L1M 700.00 764.00 25.00 27.559 30.079 0.984 53X-3089
OS 74077815L1M 740.00 778.00 15.00 29.134 30.630 0.591 53X-3072
OS 75081425L1M 750.00 814.00 25.00 29.528 32.047 0.984 53X-4629
OS 78084425L1M 780.00 844.00 25.00 30.709 33.228 0.984 53X-3032
OS 79085425L1M 790.00 854.00 25.00 31.102 33.622 0.984 53X-6666
OS 84090425L1M 840.00 904.00 25.00 33.071 35.591 0.984 53X-3034
OS 86092025L1M 860.00 920.00 25.00 33.858 36.220 0.984 53X-3055
OS 89095422L1M 890.00 954.00 22.00 35.039 37.559 0.866 53X-3077
OS 90595522L1M 905.00 955.00 22.00 35.630 37.598 0.866 53X-3065
OS 990104025L1M 990.00 1040.00 25.00 38.976 40.945 0.984 53X-9998
OS 1000106425L1M 1000.00 1064.00 25.00 39.370 41.890 0.984 53X-3093
OS 1030107025L1M 1030.00 1070.00 25.00 40.551 42.126 0.984 53X-3070
OS 1055110025L1M 1055.00 1100.00 25.00 41.535 43.307 0.984 53X-3012
OS 1105116022L1M 1105.00 1160.00 22.00 43.504 45.669 0.866 53X-4640
OS 1105116025L1M 1105.00 1160.00 25.00 43.504 45.669 0.984 53X-3018
OS 1350141525L1M 1350.00 1415.00 25.00 53.150 55.709 0.984 53X-3028
Additional sizes available in our imperial line. See page 138 for more information.
276 HITECHSEALS.COM
C
0.635 R Max. L2M
A B
Oil
Oil Seals
Seals
15-30° Our standard materials for an L2M is a steel case, a stainless steel spring,
Slight lead and a nitrile lip. The L2M seal is also available in Viton™ and silicone.
Chamfer required

A B C A B C
Part Number Shaft Dia. Groove Dia. Groove Width Shaft Dia. Groove Dia. Groove Width Garlock Ref. #
OS 18022016L2M 180.00 220.00 16.00 7.087 8.661 0.630 21238-64X-3075
OS 20024020L2M 200.00 240.00 20.00 7.874 9.449 0.787 21238-64X-3013
OS 22026016L2M 220.00 260.00 16.00 8.661 10.236 0.630 21238-64X-3074
OS 26030020L2M 260.00 300.00 20.00 10.236 11.811 0.787 21238-64X-5429
OS 26030420L2M 260.00 304.00 20.00 10.236 11.969 0.787 21238-64X-3076
OS 27531918L2M 275.00 319.00 18.00 10.827 12.559 0.709 21238-64X-3078
OS 27531919L2M 275.00 319.00 19.00 10.827 12.559 0.748 21238-64X-3096
OS 29033018L2M 290.00 330.00 18.00 11.417 12.992 0.709 21238-64X-3886
OS 32036418L2M 320.00 364.00 18.00 12.598 14.331 0.709 21238-64X-3079
OS 32036420L2M 320.00 364.00 20.00 12.598 14.331 0.787 21238-64X-3080
OS 33037018L2M 330.00 370.00 18.00 12.992 14.567 0.709 21238-64X-3007
OS 39043016L2M 390.00 430.00 16.00 15.354 16.929 0.630 21238-64X-4616
OS 40044020L2M 400.00 440.00 20.00 15.748 17.323 0.787 21238-64X-3038
OS 42046020L2M 420.00 460.00 20.00 16.535 18.110 0.787 21238-64X-3010
OS 44048020L2M 440.00 480.00 20.00 17.322 18.898 0.787 21238-64X-4192
OS 47052022L2M 470.00 520.00 22.00 18.504 20.472 0.866 21238-64X-3029
OS 52057022L2M 520.00 570.00 22.00 20.472 22.441 0.866 21238-64X-3027
OS 56061020L2M 560.00 610.00 20.00 22.047 24.016 0.787 21238-64X-7266
OS 56560120L2M 565.00 601.00 20.00 22.244 23.661 0.787 21238-64X-9995
OS 60064020L2M 600.00 640.00 20.00 23.622 25.197 0.787 21238-64X-8624
OS 63067020L2M 630.00 670.00 20.00 24.803 26.378 0.787 21238-64X-3020
OS 63069020L2M 630.00 690.00 20.00 24.803 27.165 0.787 21238-64X-3059
OS 64068020L2M 640.00 680.00 20.00 25.196 26.771 0.787 21238-64X-3019
OS 65071425L2M 650.00 714.00 25.00 25.590 28.110 0.984 21238-64X-3016
OS 67072022L2M 670.00 720.00 22.00 26.377 28.346 0.866 21238-64X-3081
OS 75081425L2M 750.00 814.00 25.00 29.528 32.047 0.984 21238-64X-4629
OS 76280015L2M 762.00 800.00 15.00 30.000 31.496 0.591 21238-64X-3048
OS 78084425L2M 780.00 844.00 25.00 30.709 33.228 0.984 21238-64X-3032
OS 79085425L2M 790.00 854.00 25.00 31.102 33.622 0.984 21238-64X-6666
OS 90595522L2M 905.00 955.00 22.00 35.630 37.598 0.866 21238-64X-3065
OS 99010425L2M 990.00 1040.00 25.00 38.976 40.945 0.984 21238-64X-9998
OS 1000106425L2M 1000.00 1064.00 25.00 39.370 41.890 0.984 21238-64X-3093
OS 1350141525L2M 1350.00 1415.00 25.00 53.150 55.709 0.984 21238-64X-3028
HITECHSEALS.COM 277
VK End Caps Metric Seals

VK End Caps
Product Description
VK end caps are a rubber-to-metal bonded cap, commonly used as a plug or cap on gear boxes. End caps are designed to fit
directly on housing bores for rotary shaft lip seals. VK end caps are primarily stocked in nitrile, however, fluorocarbon VK
end caps are available upon request.
Part Numbers:
VK - ___ ___ ___ X ___ ___
O.D. Height
Example: VK 47X7 - Nitrile VK End Cap, 47mm O.D., 7mm Height
278 HITECHSEALS.COM
Metric Seals VK End Caps
O.D.
VK End Caps
Height
Part Number O.D. Height Part Number O.D. Height

VK 19X6 19.00 6.00 VK 62X12 62.00 12.00
VK 19X7 19.00 7.00 VK 68X8 68.00 8.00
VK 22X7 22.00 7.00 VK 69X10 69.00 10.00
VK 25X7 25.00 7.00 VK 70X9 70.00 9.00
VK 26x65 26.00 6.50 VK 72X9 72.00 9.00
VK 28X4 28.00 4.00 VK 72X10 72.00 10.00
VK 28X7 28.00 7.00 VK 75X7 75.00 7.00
VK 30X7 30.00 7.00 VK 80X7 80.00 7.00
VK 30X8 30.00 8.00 VK 80X10 80.00 10.00
VK 32X7 32.00 7.00 VK 80X12 80.00 12.00
VK 35X7 35.00 7.00 VK 85X10 85.00 10.00
VK 35X8 35.00 8.00 VK 85X12 85.00 12.00
VK 35X10 35.00 10.00 VK 90X8 90.00 8.00
VK 37X5 37.00 5.00 VK 90X10 90.00 10.00
VK 37X7 37.00 7.00 VK 90X12 90.00 12.00
VK 37X10 37.00 10.00 VK 95X10 95.00 10.00
VK 40X7 40.00 7.00 VK 100X10 100.00 10.00
VK 42X7 42.00 7.00 VK 100X12 100.00 12.00
VK 42x95 42.00 9.50 VK 110X10 110.00 10.00
VK 45X5 45.00 5.00 VK 110X12 110.00 12.00
VK 47X4 47.00 4.00 VK 120X12 120.00 12.00
VK 47X65 47.00 6.50 VK 125X12 125.00 12.00
VK 47X7 47.00 7.00 VK 130X12 130.00 12.00
VK 47X10 47.00 10.00 VK 140X15 140.00 15.00
VK 50X5 50.00 5.00 VK 145X12 145.00 12.00
VK 50X10 50.00 10.00 VK 150X13 150.00 13.00
VK 52X7 52.00 7.00 VK 150X15 150.00 15.00
VK 52X10 52.00 10.00 VK 150X18 150.00 18.00
VK 55X10 55.00 10.00 VK 150X25 150.00 25.00
VK 60X7 60.00 7.00 VK 160X15 160.00 15.00
VK 60X8 60.00 8.00 VK 170X15 170.00 15.00
VK 62X7 62.00 7.00 VK 180X12 180.00 12.00
VK 62X8 62.00 8.00 VK 200X13 200.00 13.00
VK 62X10 62.00 10.00
HITECHSEALS.COM 279
V-Seals Metric Seals

V-Seals
V-Seals
VA VS VL VE
Product Description
V-seals are an excellent alternative used on rotating shafts to exclude dirt, liquids, oil, sand, and other foreign
materials from entering bearing housings, while also preventing grease from escaping. Additionally, they main-
tain excellent sealing action when the shaft is eccentric or there is some misalignment.
These seals are designed to be stretched over the shaft so that their body rotates with the shaft and holds itself
in position by its elastic fit. A seal is created by the contact between the lip and the housing or bearing. As speed
increases, friction decreases due to centrifugal action.
Part Numbers:
V ___ ___ - ___ ___ ___
Dash Number
Blank - Nitrile
V - Viton™
Style:
A
S
L
E
Example: VAV 100 - VA Style V-seal, Viton™, 90 mm I.D., 102 mm O.D., 11 mm Height
280 HITECHSEALS.COM
Metric Seals V-Seals
VA Style
C
D
E A B
F G
V-Seals
V-Seals
Due to their intermediate cross-section and wide range of diameters, the
VA style is the most popular of the V-seal designs.
Housing Dimensions Seal Dimensions

A E B C F G D
Part Number Shaft Diameter I.D. Groove Dia. Width I.D. O.D. Height
VA 003 2.70 - 3.50 A + 1.00 A + 4.00 2.50 ± 0.30 2.50 5.50 3.00
VA 004 3.50 - 4.50 A + 1.00 A + 6.00 3.00 ± 0.40 3.20 7.20 3.70
VA 005 4.50 - 5.50 A + 1.00 A + 6.00 3.00 ± 0.40 4.00 8.00 3.70
VA 006 5.50 - 6.50 A + 1.00 A + 6.00 3.00 ± 0.40 5.00 9.00 3.70
VA 007 6.50 - 8.00 A + 1.00 A + 6.00 3.00 ± 0.40 6.00 10.00 3.70
VA 008 8.00 - 9.50 A + 1.00 A + 6.00 3.00 ± 0.40 7.00 11.00 3.70
VA 010 9.50 - 11.50 A + 2.00 A + 9.00 4.50 ± 0.60 9.00 15.00 5.50
VA 012 11.50 - 12.50 A + 2.00 A + 9.00 4.50 ± 0.60 10.50 16.50 5.50
VA 013 12.50 - 13.50 A + 2.00 A + 9.00 4.50 ± 0.60 11.70 17.50 5.50
VA 014 13.50 - 15.50 A + 2.00 A + 9.00 4.50 ± 0.60 12.50 18.50 5.50
VA 016 15.50 - 17.50 A + 2.00 A + 9.00 4.50 ± 0.60 14.00 20.00 5.50
VA 018 17.50 - 19.00 A + 2.00 A + 9.00 4.50 ± 0.60 16.00 22.00 5.50
VA 020 19.00 - 21.00 A + 2.00 A + 12.00 6.00 ± 0.80 18.00 26.00 7.50
VA 022 21.00 - 24.00 A + 2.00 A + 12.00 6.00 ± 0.80 20.00 28.00 7.50
VA 025 24.00 - 27.00 A + 2.00 A + 12.00 6.00 ± 0.80 22.00 30.00 7.50
VA 028 27.00 - 29.00 A + 3.00 A + 12.00 6.00 ± 0.80 25.00 33.00 7.50
VA 030 29.00 - 31.00 A + 3.00 A + 12.00 6.00 ± 0.80 27.00 35.00 7.50
VA 032 31.00 - 33.00 A + 3.00 A + 12.00 6.00 ± 0.80 29.00 37.00 7.50
VA 035 33.00 - 36.00 A + 3.00 A + 12.00 6.00 ± 0.80 31.00 39.00 7.50
VA 038 36.00 - 38.00 A + 3.00 A + 12.00 6.00 ± 0.80 34.00 42.00 7.50
VA 040 38.00 - 43.00 A + 3.00 A + 15.00 7.00 ± 1.00 36.00 46.00 9.00
VA 045 43.00 - 48.00 A + 3.00 A + 15.00 7.00 ± 1.00 40.00 50.00 9.00
VA 050 48.00 - 53.00 A + 3.00 A + 15.00 7.00 ± 1.00 45.00 55.00 9.00
VA 055 53.00 - 58.00 A + 3.00 A + 15.00 7.00 ± 1.00 49.00 59.00 9.00
VA 060 58.00 - 63.00 A + 3.00 A + 15.00 7.00 ± 1.00 54.00 64.00 9.00
VA 065 63.00 - 68.00 A + 3.00 A + 15.00 7.00 ± 1.00 58.00 68.00 9.00
VA 070 68.00 - 73.00 A + 4.00 A + 18.00 9.00 ± 1.20 63.00 75.00 11.00
VA 075 73.00 - 78.00 A + 4.00 A + 18.00 9.00 ± 1.20 67.00 79.00 11.00
VA 080 78.00 - 83.00 A + 4.00 A + 18.00 9.00 ± 1.20 72.00 84.00 11.00
HITECHSEALS.COM 281 281

VA Style
V-Seals
V-Seals

A E B C F G D
VA 085 83.00 - 88.00 A + 4.00 A + 18.00 9.00 ± 1.20 76.00 88.00 11.00
VA 090 88.00 - 93.00 A + 4.00 A + 18.00 9.00 ± 1.20 81.00 93.00 11.00
VA 095 93.00 - 98.00 A + 4.00 A + 18.00 9.00 ± 1.20 85.00 97.00 11.00
VA 100 98.00 - 105.00 A + 4.00 A + 18.00 9.00 ± 1.20 90.00 102.00 11.00
VA 110 105.00 - 115.00 A + 4.00 A + 21.00 10.50 ± 1.50 99.00 113.00 12.80
VA 120 115.00 - 125.00 A + 4.00 A + 21.00 10.50 ± 1.50 108.00 122.00 12.80
VA 130 125.00 - 135.00 A + 4.00 A + 21.00 10.50 ± 1.50 117.00 131.00 12.80
VA 140 135.00 - 145.00 A + 4.00 A + 21.00 10.50 ± 1.50 126.00 140.00 12.80
VA 150 145.00 - 155.00 A + 4.00 A + 21.00 10.50 ± 1.50 135.00 149.00 12.80
VA 160 155.00 - 165.00 A + 5.00 A + 24.00 12.00 ± 1.80 144.00 160.00 14.50
VA 170 165.00 - 175.00 A + 5.00 A + 24.00 12.00 ± 1.80 153.00 169.00 14.50
VA 180 175.00 - 185.00 A + 5.00 A + 24.00 12.00 ± 1.80 162.00 178.00 14.50
VA 190 185.00 - 195.00 A + 5.00 A + 24.00 12.00 ± 1.80 171.00 187.00 14.50
VA 199 195.00 - 210.00 A + 5.00 A + 24.00 12.00 ± 1.80 180.00 196.00 14.50
VA 200 190.00 - 210.00 A + 10.00 A + 45.00 20.00 ± 4.00 180.00 210.00 25.00
VA 220 210.00 - 235.00 A + 10.00 A + 45.00 20.00 ± 4.00 198.00 228.00 25.00
VA 250 235.00 - 265.00 A + 10.00 A + 45.00 20.00 ± 4.00 225.00 255.00 25.00
VA 275 265.00 - 290.00 A + 10.00 A + 45.00 20.00 ± 4.00 247.00 277.00 25.00
VA 300 290.00 - 310.00 A + 10.00 A + 45.00 20.00 ± 4.00 270.00 300.00 25.00
VA 325 310.00 - 335.00 A + 10.00 A + 45.00 20.00 ± 4.00 292.00 322.00 25.00
VA 350 335.00 - 365.00 A + 10.00 A + 45.00 20.00 ± 4.00 315.00 345.00 25.00
VA 375 365.00 - 390.00 A + 10.00 A + 45.00 20.00 ± 4.00 337.00 367.00 25.00
VA 400 390.00 - 430.00 A + 10.00 A + 45.00 20.00 ± 4.00 360.00 390.00 25.00
VA 450 430.00 - 480.00 A + 10.00 A + 45.00 20.00 ± 4.00 405.00 435.00 25.00
VA 500 480.00 - 530.00 A + 10.00 A + 45.00 20.00 ± 4.00 450.00 480.00 25.00
VA 550 530.00 - 580.00 A + 10.00 A + 45.00 20.00 ± 4.00 495.00 525.00 25.00
VA 600 580.00 - 630.00 A + 10.00 A + 45.00 20.00 ± 4.00 540.00 570.00 25.00
VA 650 630.00 - 665.00 A + 10.00 A + 45.00 20.00 ± 4.00 600.00 630.00 25.00
VA 700 665.00 - 705.00 A + 10.00 A + 45.00 20.00 ± 4.00 630.00 660.00 25.00
VA 725 705.00 - 745.00 A + 10.00 A + 45.00 20.00 ± 4.00 670.00 700.00 25.00
VA 750 745.00 - 785.00 A + 10.00 A + 45.00 20.00 ± 4.00 705.00 735.00 25.00
VA 800 785.00 - 830.00 A + 10.00 A + 45.00 20.00 ± 4.00 745.00 775.00 25.00
VA 850 830.00 - 875.00 A + 10.00 A + 45.00 20.00 ± 4.00 785.00 815.00 25.00
VA 900 875.00 - 920.00 A + 10.00 A + 45.00 20.00 ± 4.00 825.00 855.00 25.00
VA 950 920.00 - 965.00 A + 10.00 A + 45.00 20.00 ± 4.00 865.00 895.00 25.00
VA 1000 965.00 - 1015.00 A + 10.00 A + 45.00 20.00 ± 4.00 910.00 940.00 25.00
282 HITECHSEALS.COM
VA Style
V-Seals
V-Seals
A E B C F G D
VA 1050 1015.00 - 1065.00 A + 10.00 A + 45.00 20.00 ± 4.00 955.00 985.00 25.00
VA 1100 1065.00 - 1115.00 A + 10.00 A + 45.00 20.00 ± 4.00 1000.00 1030.00 25.00
VA 1150 1115.00 - 1165.00 A + 10.00 A + 45.00 20.00 ± 4.00 1045.00 1075.00 25.00
VA 1200 1165.00 - 1215.00 A + 10.00 A + 45.00 20.00 ± 4.00 1090.00 1120.00 25.00
VA 1250 1215.00 - 1270.00 A + 10.00 A + 45.00 20.00 ± 4.00 1135.00 1165.00 25.00
VA 1300 1270.00 - 1320.00 A + 10.00 A + 45.00 20.00 ± 4.00 1180.00 1210.00 25.00
VA 1350 1320.00 - 1370.00 A + 10.00 A + 45.00 20.00 ± 4.00 1225.00 1255.00 25.00
VA 1400 1370.00 - 1420.00 A + 10.00 A + 45.00 20.00 ± 4.00 1270.00 1300.00 25.00
VA 1450 1420.00 - 1470.00 A + 10.00 A + 45.00 20.00 ± 4.00 1315.00 1345.00 25.00
VA 1500 1470.00 - 1520.00 A + 10.00 A + 45.00 20.00 ± 4.00 1360.00 1390.00 25.00
VA 1550 1520.00 - 1570.00 A + 10.00 A + 45.00 20.00 ± 4.00 1405.00 1435.00 25.00
VA 1600 1570.00 - 1620.00 A + 10.00 A + 45.00 20.00 ± 4.00 1450.00 1480.00 25.00
VA 1650 1620.00 - 1670.00 A + 10.00 A + 45.00 20.00 ± 4.00 1495.00 1525.00 25.00
VA 1700 1670.00 - 1720.00 A + 10.00 A + 45.00 20.00 ± 4.00 1540.00 1570.00 25.00
VA 1750 1720.00 - 1770.00 A + 10.00 A + 45.00 20.00 ± 4.00 1585.00 1615.00 25.00
VA 1800 1770.00 - 1820.00 A + 10.00 A + 45.00 20.00 ± 4.00 1630.00 1660.00 25.00
VA 1850 1820.00 - 1870.00 A + 10.00 A + 45.00 20.00 ± 4.00 1675.00 1705.00 25.00
VA 1900 1870.00 - 1920.00 A + 10.00 A + 45.00 20.00 ± 4.00 1720.00 1750.00 25.00
VA 1950 1920.00 - 1970.00 A + 10.00 A + 45.00 20.00 ± 4.00 1765.00 1795.00 25.00
VA 2000 1970.00 - 2020.00 A + 10.00 A + 45.00 20.00 ± 4.00 1810.00 1840.00 25.00
www.hitechseals.comHITECHSEALS.COM 283
VS Style
C
D
F G E A B
V-Seals
V-Seals
The VS-style features a larger I.D. contact area than the VA style. The added
contact with the shaft surface provides extra torque to the sealing lip.

A E B C F G D
VS 005 4.50 - 5.50 A + 1.00 A + 6.00 4.50 ± 0.40 4.00 8.00 5.20
VS 006 5.50 - 6.50 A + 1.00 A + 6.00 4.50 ± 0.40 5.00 9.00 5.20
VS 007 6.50 - 8.00 A + 1.00 A + 6.00 4.50 ± 0.40 6.00 10.00 5.20
VS 008 8.00 - 9.50 A + 1.00 A + 6.00 4.50 ± 0.40 7.00 11.00 5.20
VS 010 9.50 - 11.50 A + 2.00 A + 9.00 6.70 ± 0.60 9.00 15.00 7.70
VS 012 11.50 - 13.50 A + 2.00 A + 9.00 6.70 ± 0.60 10.50 16.50 7.70
VS 014 13.50 - 15.50 A + 2.00 A + 9.00 6.70 ± 0.60 12.50 18.50 7.70
VS 016 15.50 - 17.50 A + 2.00 A + 9.00 6.70 ± 0.60 14.00 20.00 7.70
VS 018 17.50 - 19.00 A + 2.00 A + 9.00 6.70 ± 0.60 16.00 22.00 7.70
VS 020 19.00 - 21.00 A + 2.00 A + 12.00 9.00 ± 0.80 18.00 26.00 10.50
VS 022 21.00 - 24.00 A + 2.00 A + 12.00 9.00 ± 0.80 20.00 28.00 10.50
VS 025 24.00 - 27.00 A + 2.00 A + 12.00 9.00 ± 0.80 22.00 30.00 10.50
VS 028 27.00 - 29.00 A + 3.00 A + 12.00 9.00 ± 0.80 25.00 33.00 10.50
VS 030 29.00 - 31.00 A + 3.00 A + 12.00 9.00 ± 0.80 27.00 35.00 10.50
VS 032 31.00 - 33.00 A + 3.00 A + 12.00 9.00 ± 0.80 29.00 37.00 10.50
VS 035 33.00 - 36.00 A + 3.00 A + 12.00 9.00 ± 0.80 31.00 39.00 10.50
VS 038 36.00 - 38.00 A + 3.00 A + 12.00 9.00 ± 0.80 34.00 42.00 10.50
VS 040 38.00 - 43.00 A + 3.00 A + 15.00 11.00 ± 1.00 36.00 46.00 13.00
VS 045 43.00 - 48.00 A + 3.00 A + 15.00 11.00 ± 1.00 40.00 50.00 13.00
VS 050 48.00 - 53.00 A + 3.00 A + 15.00 11.00 ± 1.00 45.00 55.00 13.00
VS 055 53.00 - 58.00 A + 3.00 A + 15.00 11.00 ± 1.00 49.00 59.00 13.00
VS 060 58.00 - 63.00 A + 3.00 A + 15.00 11.00 ± 1.00 54.00 64.00 13.00
VS 065 63.00 - 68.00 A + 3.00 A + 15.00 11.00 ± 1.00 58.00 68.00 13.00
VS 070 68.00 - 73.00 A + 4.00 A + 18.00 13.50 ± 1.20 63.00 75.00 15.50
VS 075 73.00 - 78.00 A + 4.00 A + 18.00 13.50 ± 1.20 67.00 79.00 15.50
284 HITECHSEALS.COM
VS Style
V-Seals
V-Seals
A E B C F G D
VS 080 78.00 - 83.00 A + 4.00 A + 18.00 13.50 ± 1.20 72.00 84.00 15.50
VS 085 83.00 - 88.00 A + 4.00 A + 18.00 13.50 ± 1.20 76.00 88.00 15.50
VS 090 88.00 - 93.00 A + 4.00 A + 18.00 13.50 ± 1.20 81.00 93.00 15.50
VS 095 93.00 - 98.00 A + 4.00 A + 18.00 13.50 ± 1.20 85.00 97.00 15.50
VS 100 98.00 - 105.00 A + 4.00 A + 18.00 13.50 ± 1.20 90.00 102.00 15.50
VS 110 105.00 - 115.00 A + 4.00 A + 21.00 15.50 ± 1.50 99.00 113.00 18.00
VS 120 115.00 - 125.00 A + 4.00 A + 21.00 15.50 ± 1.50 108.00 122.00 18.00
VS 130 125.00 - 135.00 A + 4.00 A + 21.00 15.50 ± 1.50 117.00 131.00 18.00
VS 140 135.00 - 145.00 A + 4.00 A + 21.00 15.50 ± 1.50 126.00 140.00 18.00
VS 150 145.00 - 155.00 A + 4.00 A + 21.00 15.50 ± 1.50 135.00 149.00 18.00
VS 160 155.00 - 165.00 A + 5.00 A + 24.00 18.00 ± 1.80 144.00 160.00 20.50
VS 170 165.00 - 175.00 A + 5.00 A + 24.00 18.00 ± 1.80 153.00 169.00 20.50
VS 180 175.00 - 185.00 A + 5.00 A + 24.00 18.00 ± 1.80 162.00 178.00 20.50
VS 190 185.00 - 195.00 A + 5.00 A + 24.00 18.00 ± 1.80 171.00 187.00 20.50
VS 199 195.00 - 210.00 A + 5.00 A + 24.00 18.00 ± 1.80 180.00 196.00 20.50
HITECHSEALS.COM 285
VL Style
C
D
F G E A B
V-Seals
V-Seals
The VL-style incorporates a very thin cross-section and is used

primarily where there are space limitations. VL V-seals larger
than VL 600 are available upon request.

A E B C F G D
VL 130 125.00 - 135.00 A + 5.08 A + 20.07 7.87 ± 1.52 117.00 130.21 10.41
VL 140 135.00 - 145.00 A + 5.08 A + 20.07 7.87 ± 1.52 126.00 139.21 10.41
VL 150 145.00 - 155.00 A + 5.08 A + 20.07 7.87 ± 1.52 135.00 148.21 10.41
VL 160 155.00 - 165.00 A + 5.08 A + 20.07 7.87 ± 1.52 144.00 157.21 10.41
VL 170 165.00 - 175.00 A + 5.08 A + 20.07 7.87 ± 1.52 153.00 166.21 10.41
VL 180 175.00 - 185.00 A + 5.08 A + 20.07 7.87 ± 1.52 162.00 175.21 10.41
VL 190 185.00 - 195.00 A + 5.08 A + 20.07 7.87 ± 1.52 171.00 184.21 10.41
VL 200 195.00 - 210.00 A + 5.08 A + 20.07 7.87 ± 1.52 182.00 195.21 10.41
VL 220 210.00 - 233.00 A + 5.08 A + 20.07 7.87 ± 1.52 198.00 211.21 10.41
VL 250 233.00 - 260.00 A + 5.08 A + 20.07 7.87 ± 1.52 225.00 238.21 10.41
VL 275 260.00 - 285.00 A + 5.08 A + 20.07 7.87 ± 1.52 247.00 260.21 10.41
VL 300 285.00 - 310.00 A + 5.08 A + 20.07 7.87 ± 1.52 270.00 283.21 10.41
VL 320 310.00 - 335.00 A + 5.08 A + 20.07 7.87 ± 1.52 292.00 305.21 10.41
VL 350 335.00 - 365.00 A + 5.08 A + 20.07 7.87 ± 1.52 315.00 328.21 10.41
VL 375 365.00 - 385.00 A + 5.08 A + 20.07 7.87 ± 1.52 337.00 350.21 10.41
VL 400 385.00 - 410.00 A + 5.08 A + 20.07 7.87 ± 1.52 360.00 373.21 10.41
VL 425 410.00 - 440.00 A + 5.08 A + 20.07 7.87 ± 1.52 382.00 395.21 10.41
VL 450 440.00 - 475.00 A + 5.08 A + 20.07 7.87 ± 1.52 405.00 418.21 10.41
VL 500 475.00 - 510.00 A + 5.08 A + 20.07 7.87 ± 1.52 450.00 463.21 10.41
VL 550 540.00 - 575.00 A + 5.08 A + 20.07 7.87 ± 1.52 495.00 508.21 10.41
VL 600 575.00 - 625.00 A + 5.08 A + 20.07 7.87 ± 1.52 540.00 553.21 10.41
286 HITECHSEALS.COM
VE Style
C D Seal Height (D) = 65.02
Seal O.D. (G) = I.D. + 59.94
Housing Height (C) = 50.80 ± 12.70
Housing I.D. (E) = A + 23.87
F G Housing O.D. (B) = A + 115.06
E A B
V-Seals
V-Seals
Due to its extra long sealing lip, the VE-style V-seal is used in applica-
tions where the housing is abnormally far away from the shaft. Ad-
ditional sizes are available upon request.
A F A F A F
Part Shaft Actual Part Shaft Actual Part Shaft Actual
Number Diameter Seal I.D. Number Diameter Seal I.D. Number Diameter Seal I.D.
VE 450 450.00 - 455.00 439.00 VE 660 660.00 - 670.00 640.00 VE 1040 1025.00 - 1045.00 990.00
VE 455 455.00 - 460.00 444.00 VE 670 670.00 - 680.00 650.00 VE 1060 1045.00 - 1065.00 1008.00
VE 460 460.00 - 465.00 448.00 VE 680 680.00 - 690.00 660.00 VE 1080 1065.00 - 1085.00 1027.00
VE 465 465.00 - 470.00 453.00 VE 690 690.00 - 700.00 670.00 VE 1100 1085.00 - 1105.00 1045.00
VE 470 470.00 - 475.00 458.00 VE 700 700.00 - 710.00 680.00 VE 1120 1105.00 - 1125.00 1065.00
VE 475 475.00 - 480.00 463.00 VE 710 710.00 - 720.00 689.00 VE 1140 1125.00 - 1145.00 1084.00
VE 480 480.00 - 485.00 468.00 VE 720 720.00 - 730.00 699.00 VE 1160 1145.00 - 1165.00 1103.00
VE 485 485.00 - 490.00 473.00 VE 730 730.00 - 740.00 709.00 VE 1180 1165.00 - 1185.00 1121.00
VE 490 490.00 - 495.00 478.00 VE 740 740.00 - 750.00 718.00 VE 1200 1185.00 - 1205.00 1139.00
VE 495 495.00 - 500.00 483.00 VE 750 750.00 - 758.00 728.00 VE 1220 1205.00 - 1225.00 1157.00
VE 500 500.00 - 505.00 488.00 VE 760 758.00 - 766.00 735.00 VE 1240 1225.00 - 1245.00 1176.00
VE 505 505.00 - 510.00 493.00 VE 770 766.00 - 774.00 743.00 VE 1260 1245.00 - 1270.00 1195.00
VE 510 510.00 - 515.00 497.00 VE 780 774.00 - 783.00 751.00 VE 1280 1270.00 - 1295.00 1218.00
VE 515 515.00 - 520.00 502.00 VE 790 783.00 - 792.00 759.00 VE 1300 1296.00 - 1315.00 1240.00
VE 520 520.00 - 525.00 507.00 VE 800 792.00 - 801.00 768.00 VE 1325 1315.00 - 1340.00 1259.00
VE 525 525.00 - 530.00 512.00 VE 810 801.00 - 810.00 777.00 VE 1350 1340.00 - 1365.00 1281.00
VE 530 530.00 - 535.00 517.00 VE 820 810.00 - 821.00 786.00 VE 1375 1365.00 - 1390.00 1305.00
VE 535 535.00 - 540.00 521.00 VE 830 821.00 - 831.00 796.00 VE 1400 1390.00 - 1415.00 1328.00
VE 540 540.00 - 545.00 526.00 VE 840 831.00 - 841.00 805.00 VE 1425 1415.00 - 1440.00 1350.00
VE 545 545.00 - 550.00 531.00 VE 850 841.00 - 851.00 814.00 VE 1450 1440.00 - 1465.00 1374.00
VE 550 550.00 - 555.00 536.00 VE 860 851.00 - 861.00 824.00 VE 1475 1465.00 - 1490.00 1397.00
VE 555 555.00 - 560.00 541.00 VE 870 861.00 - 871.00 833.00 VE 1500 1490.00 - 1515.00 1419.00
VE 560 560.00 - 565.00 546.00 VE 880 871.00 - 882.00 843.00 VE 1525 1515.00 - 1540.00 1443.00
VE 565 565.00 - 570.00 550.00 VE 890 882.00 - 892.00 853.00 VE 1550 1540.00 - 1570.00 1467.00
VE 570 570.00 - 575.00 555.00 VE 900 892.00 - 912.00 871.00 VE 1575 1570.00 - 1600.00 1495.00
VE 575 575.00 - 580.00 560.00 VE 920 912.00 - 922.00 880.00 VE 1600 1600.00 - 1640.00 1524.00
VE 580 580.00 - 585.00 565.00 VE 930 922.00 - 933.00 890.00 VE 1650 1640.00 - 1680.00 1559.00
VE 585 585.00 - 590.00 570.00 VE 940 933.00 - 944.00 900.00 VE 1700 1680.00 - 1720.00 1596.00
VE 590 590.00 - 600.00 575.00 VE 950 944.00 - 955.00 911.00 VE 1750 1720.00 - 1765.00 1632.00
VE 600 600.00 - 610.00 582.00 VE 960 955.00 - 966.00 921.00 VE 1800 1765.00 - 1810.00 1671.00
VE 610 610.00 - 620.00 592.00 VE 970 966.00 - 977.00 932.00 VE 1850 1810.00 - 1855.00 1714.00
VE 620 620.00 - 630.00 602.00 VE 980 977.00 - 988.00 942.00 VE 1900 1855.00 - 1905.00 1753.00
VE 630 630.00 - 640.00 612.00 VE 990 988.00 - 999.00 953.00 VE 1950 1905.00 - 1955.00 1794.00
VE 640 640.00 - 650.00 621.00 VE 1000 999.00 - 1010.00 963.00 VE 2000 1955.00 - 2010.00 1844.00
VE 650 650.00 - 660.00 631.00 VE 1020 1010.00 - 1025.00 973.00
HITECHSEALS.COM 287
Retaining Rings Metric Seals

Stainless Steel 15-7 MO (AMS 5520) -73°C to 482°C
Retaining Rings
External Internal
471 Series 472 Series
Product Description
Retaining rings, also referred to as snap rings, are typically installed in a groove on the shaft or bore. The retaining ring acts
as a shoulder which holds components in place. The retaining ring holds in place by interference on either the I.D. or O.D.
Part Numbers:
__ __ __ - __ __ __ __ M __ __
Application Material:
Diameter Blank - Carbon Steel
SS - Stainless Steel
EXT - External B - Beryllium Copper
INT - Internal
Example: EXT 280 M SS - External Spiral Retaining Ring, 280 mm Application Diameter, 471 Series, Stainless Steel
288 HITECHSEALS.COM
Accessories
Mechanic Gloves
Our mechanics gloves are made with durable goat skin and 100%
cotton. They provide a comfortable and flexible fit.
Accessories
Part Number Description
KIT GLOVEMECHM Medium
KIT GLOVEMECHL Large
KIT GLOVEMECHXL Extra Large
O-Ring Lubricant
O-ring lubricant increases the ease of installation, which can
lead to an increase in sealing integrity. The lubricant can also be
used to reduce heat and friction on the O-ring while the applica-
tion is in use.
Part Number: LUB SUPER2OZ
O-Ring Pick Set

Our O-ring pick set is an ideal way to carefully remove O-rings without damag-
ing the seal or the associated components. The pick's brass tips prevents scoring
and scratching of critical metal surfaces.
Part Number: KIT PICK
HITECHSEALS.COM 289
Accessories
U-Cup Installation Tool
U-cup installation tools bend the seal, allowing it to safely
Part Number Seal Size C/S Maximum
move past threads and other glands. Installation tools can
IT 100 LOGO 0.700” I.D. to 1.187” I.D. 0.187”
save time as well as help avoid damaging seals during the
Accessories
IT 150 LOGO 1.187” I.D. to 2.000” I.D. 0.234”

assembly process.
IT 200 LOGO 2.000” I.D. to 2.751” I.D. 0.375”
Braided Packing Extractor

Braided packing extractors use a cork screw hook to grip the com-
pressed packing. Once gripped, simply pull on the handle to remove
the packing. The extractor is sold in a three piece set.
Part Number: KIT PULLER
290 HITECHSEALS.COM
Accessories
Accessories
O-Ring Cone and Pi Tape
O-ring cones are ideal for measuring standard AS-568 O-rings. The
cone measures 184 widely used O-ring sizes with inside diameters
ranging from 1/4” thru 5-5/8”, in five standard cross-sections. The
O-ring cone stands 17.5” tall. With the purchase of an O-ring cone
Hi-Tech Seals also provides a Pi Tape.
Part Number: KIT CONE1SET
Pi Tape
Pi Tape is used to determine the imperial or metric size of an O-ring. The
cross section or series can be determined by using the cross section graph at
the top of the tape. Then unwind the Pi Tape on the inside diameter of the
O-ring to determine the imperial or metric part number.
Part Number: KIT PITAPE
HITECHSEALS.COM 291
Accessories
PTFE Tape
PTFE tape is an ultra thin material typically used to seal pipe
threads. The material provides a near universal chemical resistance.
PTFE tape is commonly and incorrectly referred to as Teflon™ Tape.
Accessories
It is also referred to as plumbers tape, thread seal tape, pipe tape,

tape dope, and polytetrafluoroethylene film.

KIT TAPE500 1/2” x 480”
KIT TAPE750 3/4” x 480”
KIT TAPE1000 1” x 480”
Polyimide Tape
Polyimide tape is an excellent material for applications with extreme temperature ranges. It can be used in
temperatures as low as -269°C/-452°F, up to 260°C/ 500°F. With its high dielectric properties Polyimide
tape is widely used by the MWD and aerospace industries, and conforms to MIL-P-46112, TYPE I. The
silicone adhesive used on the tape ensures that it does not leave any residue behind when removed.

KAP 0250 1/4” x 1300”
KAP 0500 1/2” x 1300”
KAP 0750 3/4” x 1300”
KAP 1000 1” x 1300”
KAP 2000 2” x 1300”
292 HITECHSEALS.COM
Accessories
Hex Key
A hex key, also known as allen key or wrench, is named for its
hexagonal cross-section.
Accessories
MSC HEXKEY0500 0.050”
MSC HEXKEY0625 1/16”
Cotter Pins
A cotter pin is a zinc fastener used to secure two or more metal pieces together.
The pin functions by inserting it through a hole and bending ends outwards,
securing the pin in place.

MSC 062COTTER 1/16”
HITECHSEALS.COM 293
Accessories
Socket Head Cap Screw
Socket head cap screws are designed for use in high tensile applications.
These screws are available in alloy steel and stainless steel.
Accessories
Socket Head Low Cap Screw

Socket head low cap screws are suitable in socket head cap screw appli-
cations that require fastening of a thin walled surface or a surface with
limited clearance. They are available in an alloy-steel.
Shoulder Screw
The threadless shoulder allows the screw to be used as a pivot, shaft, or
stationary guide. Shoulder screws are available in an alloy-steel.
Countersunk Socket Head Screw

Suitable for thin walled applications requiring a smooth finish.
Countersunk socket head screws are commonly used in plate, moulding,
and strip applications. They are available in alloy-steel and stainless steel.
294 HITECHSEALS.COM
Accessories
Button Head Screw
Button head screws are used in applications with walls too thin for coun-
tersunk screws and when it is a non-critical loading application. They are
available in alloy-steel and stainless steel.
Accessories
Flange Button Head Screw
The socket head design of the flange button head screw spreads the pres-
sure over the flange surface. Additionally, the button head screw can be
used with softer material flanges without harm or damage. They are avail-
able in alloy-steel.
Socket Set Screw

Socket set screws are designed to withstand torsional, axial, and vibra-
tional forces. Available in knurled cup, cone, half dog, and plain cup point
styles. They are available in alloy-steel and stainless steel.
HITECHSEALS.COM 295
Material Summary
Material Summary
ACETAL
CHLOROPRENE
ETHYLENE PROPYLENE
FLUOROCARBON
FLUOROSILICONE
HYDROGENATED NITRILE
NITRILE
PERFLUOROELASTOMER
POLYAMIDE
POLYAMIDE-IMIDE
UHMW-PE
PEEK
PTFE
URETHANE
SILICONE
VITON™ EXTREME™
TFE/P (AFLAS™/FEPM)
HYTREL®
°C -300 -250 -200 -150 -100 -50 0 50 100 150 200 250 300 350
°F -508 -418 -328 -238 -148 -50 32 122 212 320 392 482 572 662
We work with industry leading elastomer, plastic and seal technology developers to connect customers with
the most effective sealing solutions. We can develop sophisticated solutions for challenging applications.
Additional material summaries are available at:
www.hitechseals.com/materials-summary.asp.
We work closely with customers to provide customized and unique product and material solutions for any
sealing concern. Contact us for more information.
296 HITECHSEALS.COM
Material Summary
Materials
Acetal (POM)(Delrin®- DuPont™) Fluorocarbon (FKM, FPM)(Viton™ Type A - Chemours)
Material Summary
-40°C to 100°C -26°C to 204°C
-40°F to 212°F -15°F to 400°F
• Used for valve seats, wear rings, spacer rings, and • Excellent resistance to higher temperatures, petroleum
bearing oils, and gasoline
• A hard thermoplastic material, which exhibits excel- • Wide range of chemical resistance
lent wear resistance, low water absorption, is easy to • Very good ozone, weather and aging resistance
machine, and has a low coefficient of friction • Poor compatibility with H2S over 2%, amines, acetone,
hot water and steam
FEPM (TFE/P)(Aflas® FEPM)(Asahi Glass Co.) • Poor low temperature characteristics
-9°C to 232°C • Low temperature fluorocarbons are available with a
16°F to 450°F minimum temperature of -40°C/-40°F
• Good high temperature capability Fluorosilicone (FVMQ, FMQ)

• Resistant to strong acids and bases, amines, solvents, -56°C to 204°C
and hot water -69°F to 400°F
• Found in numerous applications in the oilfield industry
• Poor low temperature performance and low resilience • Wide temperature range
• Excellent resistance to hydrocarbon fuels, petroleum
Chloroprene (CR)(Neoprene - DowDuPont™) oils, and silicone oils
-40°C to 121°C • Relatively low tear strength, abrasion resistance, and
-40°F to 250°F tensile strength
• Generally not suited for dynamic applications
• Has exceptional ozone, weather, and good chemical
resistance Hydrogenated Nitrile (HNBR)
• Good mechanical properties that are retained over a -40°C to 160°C
wide temperature range -40°F to 320°F
• Exhibits good resistance to refrigerants (R12)
• Commonly used with ammonia • A nitrile based compound with improved chemical
• Poor resistance to aeromatic hydrocarbons, polar sol- resistance
vents, and toulene • Wider temperature range than standard nitrile
• High strength material that resists extrusion, abrasion,
Ethylene Propylene (EPDM, EPM) and wear
-54°C to 150°C • Water and steam resistance to +149°C/+300°F
-65°F to 302°F • H2S resistance up to 10%
• Commonly used with petroleum oils and CO2
• Excellent resistance to ozone, hot water, steam, and • Not to be used with chlorinated hydrocarbons, polar
aging solvents, or strong acids
• Commonly used with brake fluids and refrigerants
• Poor resistance to petroleum fluids and mineral oils
HITECHSEALS.COM 297
Material Summary
Hytrel® (TPC- ET)(DuPont™) Perfluoroelastomer (FFKM)(Kalrez® E.I. DuPont™)
-54°C to 149°C -15°C to 310°C
-65°F to 300°F +5°F to 590°F
Material Summary
• A thermoplastic elastomer able to handle high tem- • Broadest chemical resistance of any elastomeric material
peratures and hostile fluids • Combines the sealing integrity of elastomers with chemical
• Has excellent strength and toughness properties resistance approaching that of PTFE
• Demonstrates high resilience and flexibility which • Not suitable with liquid and gaseous sodium and potassium,
permits easier installation than PTFE materials fluorinated solvents, and refrigerants
• Not suitable with water and phosphate fluids above • High temperature compounds available up to 325°C/617°F
+80°C/+176°F • Kalrez® 4079- A low compression set 75 durometer
compound with excellent chemical resistance, good
Nitrile (NBR) mechanical properties and outstanding hot air aging
-40°C to 120°C properties
-40°F to 248°F • Kalrez® Spectrum™ 6380- An 80 durometer compound
specifically developed for chemical processes involving
• Presently the most widely used elastomer in the seal hot, aggressive amines. It has excellent overall chemical
industry resistance
• Provides an exceptional balance of good mechanical • Kalrez® Spectrum™ 7090- A 90 durometer compound,
properties, wear properties, and chemical resistance specifically targeted for use in applications requiring high
• Resistant to most mineral oils and greases hardness/higher modulus properties. This compound has
• Do not use with glycol based brake fluids and strong excellent mechanical properties including compression set
acids resistance and explosive decompression resistance
• Low temperature nitrile compound available with a
minimum temperature of -54°C/65°F
Polyamide (PA)(Nylon - DuPont™)
PEEK (Polyetheretherketone)(Ketron® - -30°C to 93°C
Mitsubishi Chemical Advanced Materials) -22°F to 199°F
-70°C to 260°C
-94°F to 500°F • Commonly used in wear rings, bushings, and anti-extrusion
rings
• High strength • A limitation is its high water absorption that leads to
• Able to retain mechanical properties at high temperatures swelling of the material
• Commonly used for anti-extrusion purposes • Nylon is available in many different grade options; FDA
• Not to be used with hydrochloric, nitric, or sulphuric acids compliant, internally lubricated, heat stabilized
298 HITECHSEALS.COM
Material Summary
Polyamide-imide (PAI)(Duratron®- Mitsubishi Polytetrafluoroethylene (PTFE)(Teflon™ - Chemours)
Chemical Advanced Materials) -268°C to 232°C
-200°C to 260°C -450°F to 450°F
Material Summary
-328°F to 500°F
• Virtually universal chemical resistance
• Provides the overall highest performance capability of • Very low coefficient of friction
any melt processable thermoplastic • Fillers such as bronze, moly, glass, and carbon are
• Good resistance to elevated temperatures as well as commonly added to alter mechanical properties
broad chemical resistance
• Capable of performing under severe stress conditions Silicone (VMQ)
at continuous temperatures up to 260°C/500°F -65°C to 232°C
• Low coefficient of thermal expansion & high creep re- -85°F to 450°F
sistance which contributes to dimensional stability
• Excellent resistance to oxidation and ozone degradation
Polyphenylene Sulphide (PPS)(Techtron®- • Wide temperature range
Mitsubishi Chemical Advanced Materials) • Most commonly used in static applications due to its
Up to 220°C poor tensile strength and wear resistance
Up to 428°F • Popular for food and medical applications
• Used for back-up rings, V-ring material in oilfield ap-

Viton™Extreme™ (FEPM, FKM)(Viton™ - Chemours)
plications, plastic pistons, valve bodies, and the hous-
-20°C to 204°C
ing of integral seals and gaskets
-4°F to 400°F
• High temperature and high strength plastic
• Good chemical resistance
• Viton™Extreme™ is a fluorocarbon compound that
• Although temperature and fluid resistance is not as
exhibits significantly improved performance over
comprehensive as that of PTFE, it has a higher strength
regular Viton™
and is a useful economic alternative
• Provides the excellent thermal resistance along with
• Used as a high temperature structural plastic for auto-
significantly advanced chemical resistance
motive components
• Fluid resistance can be limited by the filler, therefore it
Polyethylene (UHMW-PE)(Tivar® - Mitsubishi
is important to assess individual grades for compatibility
Chemical Advanced Materials)
Polyurethane (AU, EU) -250°C to 80°C
-54°C to 105°C -418°F to 176°F
-65°F to 220°F
• Commonly used as wear rings, valve seats, and in high
• Thermoplastic elastomer with higher tensile strength, speed sealing applications
toughness, and wear resistance • Good impact resistance
• Good combination of hardness and elasticity • Excellent abrasion resistance
• Good low temperature flexibility • Low coefficient of friction
• Used in high pressure hydraulic systems where parts • Non-sticking and self-lubricating material with excel-
are subject to wear lent mechanical properties
• Found to give superior performance compared to
Material and temperature information provided here is based PTFE when used in water applications
on multiple reference sources that are accepted by industry
and is intended to serve as a general guideline only. It is always
recommended to test material for suitability in your specific
application environment.
HITECHSEALS.COM 299
Literature
Literature
General Product Listing Manufacturing

Rapid Seal • Rapid Gasket • Cast Urethane
O-Ring Design Guide
Mechanical Seals Selection Guide

Agriculture • Automotive • Forestry • Industrial • Marine • Mining
Oilfield • Petrochemical • Pulp & Paper • Water & Sewage
Gasket Catalogue | Volume 2
Additional literature is available at www.hitechseals.com or through a Hi-Tech Seals sales representative.
300 HITECHSEALS.COM
www.hitechseals.com
For more information

visit us online at:
www.hitechseals.com
HITECHSEALS.COM 301
Hi-Tech Seals Branches:
Head Office | 9211 - 41 Ave NW | Edmonton, AB | T6E 6R5 | Ph: 780.438.6055 | Fax: 780.434.5866
Manufacturing Centre | 9504 - 41 Ave NW | Edmonton, AB | T6E 6G9 | Ph: 780.439.4894 | Fax: 780.436.9502
Calgary | Bay #3, 5940 - 30 St. SE | Calgary, AB | T2C 1X8 | Ph: 403.720.2856 | Fax: 403.279.2662
Winnipeg | 445 Egesz St. | Winnipeg, MB | R2R 2V5 | Ph: 204.775.7881 | Fax: 204.775.7954
Toronto | 1180 Kerrisdale Blvd; Unit #8 | Newmarket, ON | L3Y 8Z9 | Ph: 905.953.9666 | Fax: 905.953.8739
Montreal | 2101 Rue Léonard-De Vinci | Ste-Julie, QC | J3E 1Z2 | Ph: 450.655.7325 | Fax: 450.655.7359
Conroe | 12064 FM 3083 | Conroe, TX | United States | 77301 | Ph: 936.206.3124 | Fax: 936.756.0538
Broussard | 226 Jared Drive | Broussard, LA | United States | 70518 | Ph: 337.347.8870 | Fax: 337.347.8871
Can-Tech Elastomers Inc. :
Carrakeel Drive | Maydown Industrial State | Londonderry | Northern Ireland | BT47 6UQ | UK | Ph: +44.2871.861685
10/19
ISO 9001
REGISTERED QMS HITECHSEALS.COM

Seal Catalogue - Vol 4

Uploaded by

Copyright:

Available Formats

Seal Catalogue - Vol 4

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Seal Catalogue - Vol 4

Uploaded by

Copyright:

Available Formats

What is Hi-Tech Seals' vision and mission?

What is Hi-Tech Seals' vision and mission?

What products and services does Hi-Tech Seals offer?

What products and services does Hi-Tech Seals offer?

Seal Catalogue | Volume 4

Provide superior value

Supply quality products

Cast Urethane xvi

Crown Seals 108

Piston Rings 112

Fluid Seals 121

Piston Cups 125

Vee Packing 127

Oil Seals 132

Braided Packing 142

Retaining Rings 156

Rock Bit Balls 158

Vibration Mounts 165

O-Ring Cord 192

O-Ring Kits 193

Back-Up Rings 197

Capped T-Seals 198

DPP Seal 213

Buffer Seals 225

Wear Rings 231

Wear Strip 236

Piston Rings 244

Fluid Seals 248

Vee Packing 253

VK End Caps 278

Retaining Rings 288

ISO 9001:2015 Registered QMS

Custom Seal Kits

Detailed Inspection Report

Positive Material Identification

For sample size requirements or other PMI information, please contact us at

Additional Testing and Analysis

• Tensile Strength • Elongation

Rubber & Plastic Machining

Rapid Seal Profiles

Contact us for more information and a complete listing of available materials.

Rod Piston Lip Wipers Guide Back-Up Gaskets

Logo & Part Numbers

Our Gasket Division employs a Virtek LaserQC® 1200

captures over 500 data points per second, while maintaining

ment makes adjustments to the scanned data to optimize the

flashcutters for rapid gasket production.

Thickness: 1/64", 1/32", 1/16", 1/8"

Can-Tech’s key product lines include:

• Specialty Vee Packing • Custom Sealing Designs

Can-Tech’s material expertise extends to:

Research and Development

Low Temp. Nitrile -54°C to 116°C

Hydrogenated Nitrile -40°C to 160°C

Viton™/Fluorocarbon -26°C to 204°C

Aflas® FEPM -9°C to 232°C

Neoprene -40°C to 121°C

Perfluoroelastomer -15°C to 310°C

Silicone -65°C to 232°C