Istqb: Question & Answers

ISTQB
ATA
Advanced Test Analyst
QUESTION & ANSWERS
https://www.dumps4expert.com/ATA-exam-dumps
Question: 1
Which of the following descriptions is an example of the use of defect taxonomies? Number of
correct answers: 1 [K2] 1 credit
A. Grouping defects found in execution by functional areas

B. Following a defect management process through testing
C. Running tests with the aim of finding as many defects as possible
D. Using a list of known defect types to penetrate the security of computer systems
Answer: D
Question: 2
You are testing an ATM based on the following use case;

ATM start screen is showing
The user inserts card
The user types in PIN
The user selects ‘cash with receipt’
The user selects € 50
The user selects ‘no further service’
Expected results
The ATM provides €50 to the user
The ATM return the card and balance slip
The ATM clears the screen
The ATM returns to start menu In your test log which of the following could be noted as part of
additional attention points? [K3] 2 credits
A. Issues regarding time-behavior

B. Issues regarding interoperability
C. More test cases needed to achieve full coverage
D. Expected results not clearly defined
Answer: A
Question: 3
Tax system
A tax system needs to be updated due to new legislation. For a person with a salary of less than €
20.000 and who is married, the tax needs to be re-calculated. If the person also has more than two
and less than five children, an additional 10% reduction is applicable.
Applying equivalence partitioning to the “Tax System” specification, which of the following set of
equivalence classes is most effective in testing the processing the number of children?
[K3] 2 credits
A. 2, 4 and 6 children
B. 2, 4 and 5 children
C. 1, 3 and 6 children
D. 3, 4 and 6 children
Answer: B
Question: 4
Ken, an entrepreneur in Leeds finds the quality of the tea locally available so low, that he decides to
research superior teas around the world. He decides to market, sell and distribute these superior
teas via the web. His market strategy is to offer superior products on a well-designed website with
graphics that are fast to load, has high availability, superior usability and fast response times.
The website will offer the following:
-An innovative interactive catalogue of teas, which not only enables customers to buy the product,
but also enables them to provide feedback by rating the teas (which will influence his stock
purchasing levels)
Provide the customer with the ability to use secure credit card transactions
Provide the customer to give general feedback
Ken selects an iterative model for the development of the prototypes. The team consists of three
developers that are experienced in web development. Ken, although he doesn't have technical
skillset, is concerned with quality. He doesn't believe a lot of documentation is necessary and he
wants the website to be completed quickly.
The test basis contains the following:
-Story boards that show the information flow and page links through the site
-HTML pages developed to date.
-A statement of non-functional requirements.
With the strategy taking shape, Ken asks your advice on the specific testing techniques that should
be used to complete the required testing, bearing in mind the nature of the application and the
nature of Ken’s overall objectives.
Which TWO of the following items may more frequently need to be explained in greater detail for
non-functional defect reports than for a functional defect report?
[K2] 1 credit
A. Expected results
B. Steps to reproduce the defect
C. Test data used to identify the fault
D. Level of load on the system at the time of failure
E. Actual results
Answer: A,D
Question: 5
A temperature unit holds the temperature between 10 degrees Celcius and –10 degrees Celcius. If
the temperature drops below –10 or rises above 10 then an alarm rings. Boundary Value Analysis
tests are drawn up using the approach of two test cases per boundary. The temperatures to be tested
are:
[K3] 2 credits
A. 11, 10, -11, -10

B. 11, 10, 9, -11, -10, -9
C. 11, 9, -9, -11
D. 10, 9, -9, -10
Answer: A
Question: 6
Using the “Tax System” specification scenario as described above, using boundary value analysis,
which would be the most interesting test set to explicitly test one single boundary value as defined in
the “Tax System” specification?
[K3] 3 credits
A. (i)
B. (ii)
C. (iii)
D. (iv)
Answer: D

Istqb: Question & Answers

Uploaded by

Copyright:

Available Formats

Istqb: Question & Answers

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Istqb: Question & Answers

Uploaded by

Copyright:

Available Formats

ISTQB

A. Grouping defects found in execution by functional areas

You are testing an ATM based on the following use case;

A. Issues regarding time-behavior

A. 11, 10, -11, -10

You might also like