Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    MODBUS Server (Modbus RTU Slave) : HMI Setting

    Uploaded by

    bryan stivn
    This document provides guidelines for connecting an HMI to a PLC using MODBUS RTU or TCP/IP protocols. Key settings include selecting the PLC type as MODBUS Server, setting the communication interface and port number, and configuring the device addresses that map PLC registers to function codes for reading and writing data. Wiring diagrams are also included for RS232, RS485, and Ethernet connections between the HMI and PLC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MODBUS Server (Modbus RTU Slave) : HMI Setting

    Uploaded by

    bryan stivn
    34 views6 pages
    This document provides guidelines for connecting an HMI to a PLC using MODBUS RTU or TCP/IP protocols. Key settings include selecting the PLC type as MODBUS Server, setting the communication interface and port number, and configuring the device addresses that map PLC registers to function codes for reading and writing data. Wiring diagrams are also included for RS232, RS485, and Ethernet connections between the HMI and PLC.

    Original Title

    Modbus_Server

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides guidelines for connecting an HMI to a PLC using MODBUS RTU or TCP/IP protocols. Key settings include selecting the PLC type as MODBUS Server, setting the communication interface and port number, and configuring the device addresses that map PLC registers to function codes for reading and writing data. Wiring diagrams are also included for RS232, RS485, and Ethernet connections between the HMI and PLC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views6 pages

    MODBUS Server (Modbus RTU Slave) : HMI Setting

    Uploaded by

    bryan stivn
    This document provides guidelines for connecting an HMI to a PLC using MODBUS RTU or TCP/IP protocols. Key settings include selecting the PLC type as MODBUS Server, setting the communication interface and port number, and configuring the device addresses that map PLC registers to function codes for reading and writing data. Wiring diagrams are also included for RS232, RS485, and Ethernet connections between the HMI and PLC.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    PLC Connection Guide

    MODBUS Server (Modbus RTU Slave)

    HMI Setting:
    Parameters Recommend Option Notes
    PLC type MODBUS Server
    PLC I/F RS232 RS232, RS485
    9600~115200 Ethernet supports UDP or TCP/IP
    Baud rate 9600
    Ethernet protocol
    Even, Odd,
    Parity Even
    None
    Data bits 8 8
    Stop bits 1 1
    PLC st. no. 1 1-31 HMI Modbus Station No.
    Port no. 502

    Online simulator YES Extend address mode NO


    Broadcast command NO

    PLC Setting:
    Communication mode Modbus RTU protocol

    Modbus Server UDP Protocol Setting:


    MODBUS Server (Ethernet) supports UDP communication protocol. To use UDP mode,
    go to [System Parameter Settings] in editing software, in [Device list] click [New], for [PLC
    type] select “Modbus Server”, [PLC I/F] set to [Ethernet], and select [Use UDP (User
    Datagram Protocol)] to finish setting.

    2
    PLC Connection Guide

    Modbus Server Port No. can be changed by clicking [Settings].

    Modbus Server Port No. can not be set identically to HMI Port No. When doing so, the
    warning message below will be shown requesting users to change setting.

    „ A maximum of 64 Clients can be connected simultaneously.


    „ Modbus Server Port No. can’t be identical to HMI Port No.

    3
    PLC Connection Guide

    Modbus Server TCP/IP Protocol Setting:


    MODBUS Server (Ethernet) supports TCP/IP communication protocol. Go to [System
    Parameter Settings] in editing software, in [Device list] click [New], for [PLC type] select
    “Modbus Server”, [PLC I/F] set to [Ethernet] to finish setting.

    For Modbus Server TCP/IP, HMI Port No. is the same as Modbus Server Port No. To
    change Prot No. go to [System Parameter Settings] / [Model], the default Port No. is
    “8000”, and it is allowed to change Modbus Server Port No. here.

    4
    PLC Connection Guide

    Device Address:
    Bit/Word Device type Format Range Memo
    B LB dddd 0~9998 Mapping to 0x/1x 1~9999
    W LW dddd 0~9998 Mapping to 3x/4x 1~9999
    W RW ddddd 0~55536 Mapping to 3x/4x 10000~65536

    LB0 = 0x0001, LB1 = 0x0002, LW0 = 3x0001, LW1 = 3x0002


    Modbus RTU Server doesn’t support function code 06(preset single register), please use
    function code 16(0x10, preset multiple registers).

    Modbus Server Function Code:


    0x 0x01 Read coil 0x05 write single coil
    0x_multi_coils 0x01 Read coil 0x0f write multiple coils
    1x 0x02 Read discrete input N/A for write operation
    3x 0x04 Read input register N/A for write operation
    4x 0x03 Read holding register 0x10 write multiple registers

    Wiring Diagram:
    9P D-Sub to 9P D-Sub:
    HMI COM1 HMI COM2 HMI COM3 Modbus RTU Controller RS232
    RS232 9P RS232 9P RS232 9P 9P D-Sub
    D-Sub Male D-Sub Male D-Sub Female
    2 RX 6 RX 8 RX TXD
    3 TX 4 TX 7 TX RXD
    5 GND 5 GND 5 GND GND
    RTS
    circuit
    CTS

    5
    PLC Connection Guide
    9P D-Sub to 9P D-Sub:
    HMI COM1 Modbus RTU Controller RS422
    RS485 4W 9P 9P D-Sub
    D-Sub Female
    1 RX- TX-
    2 RX+ TX+
    3 TX- RX-
    4 TX+ RX+
    5 GND GND

    9P D-Sub to 9P D-Sub:
    HMI COM1 HMI COM3 Modbus RTU Controller RS485
    RS485 2W 9P RS485 2W 9P 9P D-Sub
    D-Sub Female D-Sub Female
    1 RX- 6 Data- D-
    2 RX+ 9 Data+ D+
    5 GND 5 GND GND

    Direct connect (crossover cable):


    HMI RJ45 Female Wire Color PLC RJ45 Female
    1 TX+ White/Orange 3 RX+
    2 TX- Orange 6 RX-
    3 RX+ White/Green 1 TX+
    4 BD4+ Blue 4 BD4+
    5 BD4- White/Blue 5 BD4-
    6 RX- Green 2 TX-
    7 BD3+ White/Brown 7 BD3+
    8 BD3- Brown 8 BD3-

    6
    PLC Connection Guide
    Through a hub:
    HMI RJ45 Female Wire Color PLC RJ45 Female
    1 TX+ White/Orange 1 TX+
    2 TX- Orange 2 TX-
    3 RX+ White/Green 3 RX+
    4 BD4+ Blue 4 BD4+
    5 BD4- White/Blue 5 BD4-
    6 RX- Green 6 RX-
    7 BD3+ White/Brown 7 BD3+
    8 BD3- Brown 8 BD3-

    Note: Setting more than one Modbus Server in HMI Device List is of no effect.

    Driver Version:
    Version Date Description
    V1.00 Dec/30/2008 Driver released

    You might also like