21.TDS MIXO Blockaid G

®
MIXO
Cicofloor Blockaid
®
FS-50 G Technical Data Sheet
Admixture for Block & Light Precast Industry
Solvent Free Epoxy Floor Coating Issue 01/May 15
Description Packaging
MIXO® Blockaid G is a specific formulation for dry 210 liter drums or 1000 liter flow bins.
concrete in immediate demoulding. It is particularly
adapted for the realization of blocks and flooring Properties
blocks. Appearance Dark brown liquid
MIXO® Blockaid G was designed and developed Density Kg/Lit @ 25°C 1.16 ± 0.02
for the production of concrete blocks and pH @ 25°C 7±1
associated products. This innovative solution Chloride content Nil
improves the quality and the optimization of
industrial process. Performance Guidelines
The water reduction gained by using MIXO® The table below shows the development of
Blockaid G enables obtaining extra strength, which compressive strength in different ages for one
enables cement save up to 10 %. concrete mix using 0.7 % dosage of MIXO®
MIXO® Blockaid G is suitable for use in tropical and Blockaid G which allowed 10 % of cement saving
hot climates. and 7 % reduction of W/C ratio than control mix.
Uses 1 day 3 days 7 days 28 days

 Cement blocks, pavers and curb industry. 15% 18% 25% 30%
 Prefabrication of all elements in immediate
demoulding. Application Instructions
 Precast concrete industry. Dispensing
 Piping and culverts concrete industry. MIXO® Blockaid G is ready to use. For the best
 All semi dry mixes used in manufactured results it should be added during the mixing cycle at
concrete products. the same time as the water.
The addition of MIXO® Blockaid G disperses the
Advantages fine particles in the mix, improves cement
 Strength enhancement allowing mix cost dispersion and compaction to maximize the
optimization. strength.
 Ideal solution to improve consistency of the Automatic dispensing equipment is recommended
manufacturing process of blocks and for economical usage and to achieve required
associated products, also helping to reduce performance.
cycle times. These advantages save time
without reduction of quality in the production of Dosage
these elements. Lab trials should be made in prior to determine the
 Improved surface finish giving visual right dosage of each concrete mix.
improvement to quality. The safe dosing range of MIXO® Blockaid G is 0.3
 Improves cement mix impermeability. – 1.1 liters per 100 kg of cement, including any
 Compatible with all types of Portland cement replacement material.
cement, class C and F fly ash, slag, micro MIXO® Blockaid G is normally used for a cement
silica, calcium chloride and fibers. reduction of app. 10% in block mixes.
 Chloride free, safe to be used in contact
with the reinforcement. Overdosing
 Helps save cement in block industry. In general, any overdose will cause slight extra
 Improves green strength, reducing potential of retardation and workability while the ultimate
deformation of the units before the curing strength of block mix will slightly increase as the
process is complete. Water/Cement ratio is getting less.
Using SRC in the mix with such type of admixtures
Standards Compliance won’t be affecting the retardation of setting time like
MIXO® Blockaid G complies with ASTM C494 Type retarders, i.e., it is safer.
A and BS EN 934 Part 2. Please ask for CIC technical advice if any overdose
is demanded.
MIXO® Blockaid G
Cicofloor®FS-50
Curing Technical Support

Freshly hardened block should be cured by water CIC provides on-site assistance, as well as
immediately after final setting time, especially at consulting services on projects when requested.
high temperatures. Technical data sheets on other MIXO products and
guidance on their use are available on request.
Cleaning and Disposal
Spillages of MIXO® Blockaid G should be washed Precautions
out with water or absorbed onto fine sand and Health and Safety
disposed out in accordance with local authorities’ MIXO® Blockaid G is non-hazardous. It should not
regulations. be swallowed or allowed to come into contact with
skin or eyes. Suitable protective goggles and gloves
Shelf Life & Storage should be worn. In the case of contact with eyes,
12 months shelf life when stored in its original rinse immediately with plenty of water and seek
containers under shaded area in a temperature medical advice. When contact with the skin, wash
within the range of 2°C to 50°C. off immediately with soap and water. If swallowed,
seek medical attention immediately, do not induce
vomiting.
Warranty
MIXO products are guaranteed against defective materials and manufacture and sold subject to CIC's standard terms and conditions of sale. Whilst CIC endeavors
to ensure that any advice, information or recommendation given is correct, the company cannot accept any liability either directly or indirectly arising from the use
of its products, since the company has no control over the application of its products. Information contained in this document is given on the best current knowledge.
CIC's policy is one of continuous improvement and the company reserves the right to change the company products without prior notice.
Head Office: Jeddah Towers Building, Sharafeyah – P.O Box 7232, Jeddah 21462
(+96612) 653-2152 – 6514414 – 6531622 Fax (+96612) 651-9230
Factories: Plant 1: AlKhomra - Jeddah Telefax (+96612) 6365190
Plant 2: Jubail (+96613) 3404771 – 3404772 Fax (+96613) 3404770
Aal Taher Group
Branches: Jeddah (+96612) 6055657 Riyadh (+96611) 493 7635 Khobar (+96613) 8651349
Madinah (+96614) 8390424 Makkah (+96612) 5482280 Yanbu (+96614) 3907539 Tabuk (+96614) 4275680
www.cictg.com

21.TDS MIXO Blockaid G

Uploaded by

Copyright:

Available Formats

21.TDS MIXO Blockaid G

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

21.TDS MIXO Blockaid G

Uploaded by

Copyright:

Available Formats

®

Uses 1 day 3 days 7 days 28 days

Curing Technical Support

You might also like