Scribd Logo
Upload

Welcome to Scribd!

  • 513 views

    AVR 1710 Upgrade Instructions ENGLISH 2014 - V002.23

    Uploaded by

    irineu
    This document provides instructions for upgrading the software on a Harman Kardon AVR 1710 receiver to version V002.23. The upgrade improves Android functionality. It notes the system requirements of using a USB stick with at least 256MB of storage to complete the upgrade. The instructions explain how to check the current software version and step-by-step directions for performing the upgrade, which will take approximately 10 minutes and erase all saved settings. After upgrading, the user must re-enter any saved configuration or preset settings.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    AVR 1710 Upgrade Instructions ENGLISH 2014 - V002.23

    Uploaded by

    irineu
    513 views2 pages
    This document provides instructions for upgrading the software on a Harman Kardon AVR 1710 receiver to version V002.23. The upgrade improves Android functionality. It notes the system requirements of using a USB stick with at least 256MB of storage to complete the upgrade. The instructions explain how to check the current software version and step-by-step directions for performing the upgrade, which will take approximately 10 minutes and erase all saved settings. After upgrading, the user must re-enter any saved configuration or preset settings.

    Original Title

    AVR 1710 Upgrade instructions ENGLISH 2014_V002.23

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for upgrading the software on a Harman Kardon AVR 1710 receiver to version V002.23. The upgrade improves Android functionality. It notes the system requirements of using a USB stick with at least 256MB of storage to complete the upgrade. The instructions explain how to check the current software version and step-by-step directions for performing the upgrade, which will take approximately 10 minutes and erase all saved settings. After upgrading, the user must re-enter any saved configuration or preset settings.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    513 views2 pages

    AVR 1710 Upgrade Instructions ENGLISH 2014 - V002.23

    Uploaded by

    irineu
    This document provides instructions for upgrading the software on a Harman Kardon AVR 1710 receiver to version V002.23. The upgrade improves Android functionality. It notes the system requirements of using a USB stick with at least 256MB of storage to complete the upgrade. The instructions explain how to check the current software version and step-by-step directions for performing the upgrade, which will take approximately 10 minutes and erase all saved settings. After upgrading, the user must re-enter any saved configuration or preset settings.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    harman/kardon

    AVR 1710 SOFTWARE UPGRADE INSTRUCTIONS February 2015

    Harman Kardon is pleased to offer this product upgrade, which improves the performance
    of your AVR.

    This software upgrade, version V002.23, improves the following:

     Android functionality with AVR 1710

    Important Note
    This software is specially designed for use with Harman Kardon AVR 1710 receiver.
    Use with any other models or brands may cause damage to the product.
    DO NOT USE THIS SOFTWARE WITH ANY OTHER PRODUCTS.

    How Can I Tell if My Receiver Needs this Upgrade?


     This software upgrade is the following version: V002.23

    Depending on when your AVR was manufactured, it may have already had the latest
    software installed at the factory. To see if its software requires an upgrade, please follow
    these steps:

    1. With the AVR switched ON, and your TV screen connected and ON to show the On-
    Screen Menus, press the AVR Remote’s “OSD/MENU” Button. This opens the Master
    Menu.
    2. Scroll down to “System Setup”, confirm with the “OK” Button.
    3. In the “System Setup” menu, scroll down to “Software Update”. Confirm with the
    “OK” Button.
    4. If the software version shown is “V002.23”, your receiver has the latest software
    version, and no further action is needed. Go to “Back to cancel” and confirm with
    “OK”.
    5. If the display shows any other readout, please proceed and carry out the upgrade
    according to the instructions on page 2.

    System requirements:

    To install the software upgrade, you will need to UNZIP the software ZIP file ontothe main
    root directory of a USB memory stick with at least 256Mb of available storage capacity. We
    recommend that there be no other files in the main “root” directory of the memory device.
    If the root directory does contain any existing files, we recommend that you either remove
    them or save them to a separate folder on the memory stick.
    harman/kardon
    AVR 1710 SOFTWARE UPGRADE INSTRUCTIONS February 2015

    INSTALLATION INSTRUCTIONS

    PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE PROCEEDING.


    Upgrading your receiver is easy, but for the upgrade to work properly, it is important to
    carefully follow the instructions below. The upgrade will take approximately 10 minutes,
    and once it begins you must complete the entire process in one session. Please allow
    sufficient time to complete all the steps.

    CAUTION
    Installing the new software will erase all information in your AVR system memory, which
    means that any configuration settings or tuner presets that you have entered will be lost. To
    make it easier to reestablish the settings after completing the update, we suggest writing
    down your current system configurations (e.g. speaker distance and volume etc.) or radio
    presets on a sheet of paper.

    Attention: Do not cut off the power while updating!

    1. Insert the USB stick with the software file into the USB input on the front panel.
    2. Follow the procedure on page 1, points 1-5, and select “OK to continue” instead
    of “Back to cancel”.
    3. The AVR confirms that software is found on the USB stick and begins the update
    process.
    4. SOFTWARE UPDATE begins.
    5. During the SOFTWARE UPDATE, the AVR will auto power off.
    6. The AVR will auto power on and display “UPGRADE SUCCESS”.
    7. The AVR switches to FM, but since all memories and presets have been erased,
    no station is tuned.
    8. Power off the unit and remove the USB stick.
    9. Now you can Power ON again for full use of the AVR.

    Congratulations, your receiver is now upgraded to the latest software version.

    Before using your receiver, you should re-enter the input and speaker configuration settings
    and tuner presets that you wrote down.

    You might also like