Scribd Logo
Upload

Welcome to Scribd!

  • 79 views

    Ge e Cell MK 3 L

    Uploaded by

    Benjamin Miller

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ge e Cell MK 3 L

    Uploaded by

    Benjamin Miller
    79 views1 page

    Original Title

    Ge e Cell Mk 3 l

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    79 views1 page

    Ge e Cell MK 3 L

    Uploaded by

    Benjamin Miller

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Lenntech

    [email protected] Tel. +31-152-610-900

    E-Cell MK-3 Stack


    www.lenntech.com Fax. +31-152-616-289

    Industrial Electrodeionization (EDI) Stacks


    E-Cell MK-3 is designed to: Typical Performance
    • Provide Ultrapure Water for industrial applica-
    Product Quality
    tions including Power, Semiconductor, and
    General Industry. Resistivity > 16 MOhm-cm
    • Produce Mixed Bed quality water on a con-
    tinuous basis. Sodium < 3 ppb
    • Require no caustic or acid for regeneration of Silica (SiO2) Removal Up to 99% or < 5 ppb
    mixed bed resin within the stack.
    • Be leak free, guaranteed. Boron Removal > 95%

    • Eliminate brine injection and concentrate recircu- Operating Parameters


    lation, simplifying system design.
    Recovery Up to 95%
    Description and Use Counter current vs.
    Concentrate Flow Product Flow
    MK-3 E-Cell stacks are electrodeionization (EDI)
    stacks which use electrical current to deionize and Voltage 0 – 300 VDC
    polish reverse osmosis (RO) permeate water. The
    Amperage 0 – 5.2 ADC
    product water for the MK-3 is at an Ultrapure level
    required in today’s most demanding applications. Inlet Pressure 4.8 – 6.9 bar 70 – 100 psi

    Typical Applications Pressure Drop at Nominal Flow 1.4 – 2.4 bar 20 – 35 psi

    • Semiconductor
    • Microelectronics Maximum Feed Water Specifications
    • Power Generation (NOx, Boiler Feed)
    • General Industry Feed Water - Total Exchange- <25 mg/l <25 ppm
    able Anions (TEA as CaCO3)
    Quality Assurance Feed Water – Conductivity, < 43 µS/cm < 43 µS/cm
    NaHCO3 equivalent
    • CE, UL & CSA marked
    • Manufactured in a ISO 9001:2000 facility Temperature 4.4 – 38˚C 40 – 100˚F
    Total Hardness (as CaCO3) < 1.0 mg/l < 1.0 ppm
    MK-3 Stack Specifications Silica (SiO2) < 1.0 mg/l < 1.0 ppm
    Nominal Flow 3.4m3/hr 15.0 gpm Total Organic Carbon (TOC as C) < 0.5 mg/l < 0.5 ppm
    Flow Rate Range 1.7 – 4.5 m3/hr 7.5 – 20.0 gpm
    Total Chlorine < 0.05 mg/l < 0.05 ppm
    Shipping Weight 92 kg 202 lbs
    Dimensions 30 cm x 61 cm x 48 cm 12” x 24” x 19” Actual performance may vary depending on site conditions.
    (width x height x depth)
    Reference E-Calc projection software to verify actual performance.
    Patents pending

    Lenntech
    [email protected] Tel. +31-152-610-900
    www.lenntech.com Fax. +31-152-616-289

    FS1622EN.doc Jun-08

    You might also like