S5800

SERIES
Varied Service
Characteristics Versatile
IPv6 Solution Complete
Carrier-Level High
Security Mechanism
Reliability
Data-center TOR
Advanced Hardware Switches
Architecture and Industry- Full Layer-3 Functions
leading Port Density
Supports Maximum 48 10GE
Ports and 4 100GE QSFP28
Uplink Ports

Carrier-Level Aggregation Layer-3 Ethernet Switch Innovative

BVSS (VIDA Virtual Switch System):
virtualize multiple physical devices into one. The
Product Overview performance, reliability and management capabilities of the
virtual system combine to outperform that of individual
VIDA S5800 Series is a new generation of full- 10GE TOR physical devices;
switches, oriented for high-performance computing, data
center and high-end campuses. The S5800 Series adopts Improved Performance: BVSS makes full use of each link in
our most advanced hardware architecture designs. the physical device cluster, which avoids STP blocking on links
S5800 Series (1U height) supports up to 2.56Tbps and protects the original link to the maximum;
switching capacity and 48 10GE ports + 2 40GE ports + 4
100G ports or 72 10GE ports. High Reliability: Based on the advanced distribution
S5800 Series supports BVSS, TRILL, SDN and FCoE/ FC. By mechanism and efficient cross-physical link
cooperating with S9500 Series, S5800 Series can converge data aggregation function, the logic control plane, service control
of 15000+10GE servers. plane and service data plane are separated. Thus, the device
Developed on the basis of BDROS 6 - a software platform can support continuous layer3 routing forwarding, avoiding
VIDA with its own independent intellectual property service interruption as a result of a single point of failure;
rights, S5800 Series provides high-performance L2/L3/L4
wire speed switching capacity by integrating services such as Eas y Management : BV S S r ealiz es single IP
IPv6, MPLS VPN, network security, flow analysis, management , greatly improving the networking efficiency
virtualization, with high reliable techniques including and lowering operating costs.
continuous forwarding, graceful restarting and loop
network protection, all which works efficiency withing the
S5800 Series fabric for guaranteed maximum runtime.
S5800 Series suppor ts the “GreenTouch”
architecture and “Smart@CHIP”. Its power
consumption is lower than 200W.
S5800 Series has 4 models: S5828, S5832, S5864 and
S5864H.
Product Characteristics

Rich Data Center Services S5800 series supports storm/multicast/unicast limits, ensuring
normal running conditions of the equipment when deployed in
harsh network conditions.
BVSS (VIDA Virtual Switch System)
S5800 Series supports BVSS, which can virtualize multiple S5800 series supports perfect ring detection
physical devices into a single logical element. The mechanisms, ensuring long- term n e t wo r k
virtualized system is superior to the independent performance stability.
physical device in performance, reliability, flexibility and
management. S5800 series supports port isolation within the same VLAN,
Doubled Performance: The virtualized system makes the best DHCP-Snooping, and IP + MAC + Port binding.
use of each link in the device and avoids blocking of STP to
the links.
High-reliability: Based on the advanced distributed processing Versatile IPv6 Solution
technique and the efficient function of cross-physical device
link aggregation, , the S5800 Series provides non-stop layer-3 S5800 Series supports the IPv6 protocol suite, IPv6 neighbor
routing forwarding and avoids single points of failure. discovery, ICMPv6, path MTU discovery, DHCPv6, etc.;
Flexibility: The virtual cluster function of the S5800 S5800 Series supports Ping, Traceroute, Telnet, SSH, ACL
allows the distance of a cluster system to expand over up based on IPv6;
to 80KM, breaking the geographic restrictions of traditional S5800 Series supports MLD, MLD Snooping, IPv6 static
cluster techniques. routing, RIPng, OSPFv3 and BGP4+, etc.; Supports IPv6
Easy Management : The whole virtual system realizes tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4
single IP unified management and simplifies the management tunnel, ISATAP;
of network device and network topology. S5800 Series supports IPv4 transiting to IPv6: IPv6 manual
*Large Layer-2 Network Technique: S5800 Series adopts tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.
large layer-2 network technique which supports
TRILL/SPB protocol. With this technique, the network
structure has become simplified and compact, which
better enables access for data center, large-scale servers. Data Center Level High-reliability
*Unified Architecture: S5800 Series supports FCoE (FC over
Ethernet) technique, which solves the problem of
S5800 Series adopts HPS (Hitless Protection System).
discrepancy between LAN network and FC storage network
The key components of he S5800 Series such as the
and integrates computing, data and storage networking.
power system and the fan system supports redundancy
*SDN: S5800 Series supports SDN (Software Defined Network),
in design. All system modules support hot-swap and
which can realize network virtualization and centralized
seamless switching without need of manual intervention.
management.
S5800 Series supports redundancy protection
mechanisms such as STP/RSTP/MSTP protocol, VRRP
protocol, ring network protection, dual uplink
active/standby link protection and LACP link
aggregation.
S5800 Series supports ISSU (In-Service Software Upgrade),
Security+ guaranteeing non-stop forwarding of service data while
the system is upgrading.
S5800 Series supports BFD and realizes fault detection
Equipment-level security: The advanced hardware
and service recovery in seconds through linking with layer-2
infrastructure design realizes the level-based packet
or layer-3 protocol.
schedule and packet protection, prevents DoS-/TCP-
S5800 Series has perfect Ethernet OAM, 802.3ah, 802.1ag
related SYN Flood, UDP Flood, Broadcast Storm
and ITU-Y.1731 which can monitor the network
or large traffic attacks, and supports level-based
operating state in real time and rapidly detect and locate
command line protection, endowing different levels of
the malfunction.
users with different management permissions.
High Reliability (99.999%): The MTTR of the S5800 Series is
50ms, satisfying the requirement for reliable delivery of
carrier-level service.
Perfect security authentication mechanisms: IEEE 802.1x,
Radius and BDTacacs+.

VIDA S5800 Series

Product Specifications

Item S5832 S5864 S5828 S5864H

Interface 4 GE TXports, 4810GE/GESFP+ports, 2410GE/GESFP+ports, 48 10GE/GESFP+ ports,
2410GE/GESFP+ports, 2 4 100GE/40GE QSFP28ports 240GE QSFP+ ports,
40GEQSFP+ports 4 40GEQSFP+ports 4 100GE/40GEQSFP28ports
Console 1RJ45console,1MGMT 1 RJ45 console, 1 1 RJ45 console, 1 MGMT 1 RJ45 console, 1 MGMT
MGMT
Backplane 648Gbps 1280Gbps 800Gbps 1920Gbps
Forwarding r ate 486Mpps 960Mpps 600 Mpps 1440 Mpps
Dimensions 442x404x44 442x404x44 440x350x44 442x404x44

Weight 8.5
8.6 7.1 8.8

Package Dimensions 596x468x114 616x488x140 576x448x94 616x488x140

Weight(KG) 9.7 9.8 8.3 10

Power no-load 81.5W 94W 45W 102W
consumption full-load 92W 131.5W 70W 147W
Power AC: 100V-240V, 2 2 2 2
supply (hot-
swap) 50Hz±10%
Power status monitoring Support Support Support Support
Total output 313.99 448.81 238.91 501.71
BTU
(1000BTU/H=
Fan number 5 5 4 4
293W) 55 57 57
Noise@25°C（dBA) 55
MTBF(H) >100,000 >100,000 >100,000 >100,000
Forwarding mode Store-forward Store-forward Store-forward Store-forward
Flash (MB) 32 32 32 64
DRAM (MB) 2048 2048 1024 512

MAC 128K 128K 32K 64K

Jumbo frame 9K 9K 9K 9K

Routing IPv4 16K 16K 16K 8K

table IPv6 8K 8K 12K 4K

ARP table IPv4 16K 16K 10K 4K

IPv6 8K 8K 10K 4K
Total SVI 1K 1K 1K 1K

VIDA S5800 Series

Features
VLAN MPLS Reliability
· 4K Active VLAN, QinQ & Selective QinQ, · LDP protocol, Multi-VRF, · Static/LACP link aggregation,
GVRP, Private VLAN · MPLS L2 VPN · Interface backup
· BVSS virtual-stacking
Spanning Tree QoS · EAPS and ERPS
· CAR, HQoS, MAC/IP/TCP/UDP/ · URPF, LLDPISSU
· 802.1D (STP)
VLAN/COS/DSCP/TOS based QoS,
· VRRP
· 802.1W (RSTP) and 802.1S (MSTP) · 802.1P/DSCP priority re-labeling, SP, WRR, · 1+1 power backup
· BPDU guard,root guard and loopback guard and “SP+WRR”, Tail-Drop,
· WRED, flow monitoring and traffic Management
shaping
Multicast · Console, Telnet, SSH v1/2, HTTP
· HTTPSSNMP v1/v2/v3, RMON
· PIM-SM, PIM-DM, Security · TFTP, FTP, SFTP
· IGMP v1/v2/v3, · NTP, SPAN, RSPAN
· IGMP Snooping, · Port isolation, Port security,
· IGMP Fast Leave, and “IP+MAC+port” binding, MAC
· MVR, IGMP filter · stickyDHCP Snooping and option 82, DAI Environment
& IP source guard, PPPoE+,
· IEEE 802.1x, Radius and BDTacacs+ · Operating temperature/humidity: 0℃ -
50℃ ,10%-90% non-condensing
IPv4 L2/L3/L4 ACL flow identification and
filtrationAnti-attack from · Storage temperature/humidity:
· Static routing, RIP v1/v2, · DDoS, TCP’s SYN Flood, UDP Flood, -20℃ -70℃ , 5%-95% non-condensing
· OSPF, BGP, PBR, ECMP etc.Broadcast/multicast/unknown
· BFD for OSPF, BGP · unicast storm-control Certification
· MD5, SHA-256, RSA-1024, AES256,
IPv6 etc.
· CE, FCC, ROHS
· ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet
· IPv6 neighbor discovery, Path MTU
discovery
· MLD V1/V2, MLD snooping
· IPv6 Static Routing, RIPng, OSPFv3, BGP4+
· Manual tunnel, ISATAP tunnel, 6 to 4
tunnel

VIDA S5800 Series

Ordering Information

Item Description
S5800 series switches
S5832 Ethernet routing switch with 24 10GE ports, 2 40GE ports and 4 GE ports (1 console port, 1 out-band port,
24 10GE/GE SFP+ ports, 2 40GE QSFP+ ports (each 40GE port can expand to 4 10GE ports); 2 power slots
with 2 hot-swap AC220V power supplies; 5 fan slots, including 5 fans; 1U, 19-inch rack-mounted
installation)
S5864 Ethernet routing switch with 48 10GE ports, 4 40GE ports (1 console port, 1 out-band port, 1 USB2.0, 48
10GE/GE SFP+ ports, 4 40GE QSFP+ ports (each 40GE port can expand to 4 10GE ports); 2 power slots
with 2 hot-swap AC220V power supplies; 5 fan slots, including 5 fans; 1U, 19-inch rack-mounted
installation)
S5828 Ethernet routing switch with 24 10GE ports, 4 100GE ports (1 console port, 1 out-band port, 24
10GE/GE SFP+ ports, 4 100GE/40GE QSFP28 ports (can expand to 4 10GE ports); 2 power slots with 2 hot-
swap AC220V power supplies; 4 fan slots, including 4 fans; 1U, 19- inch rack-mounted installation)

S5864H Ethernet routing switch with 48 10GE ports, 2 40GE ports and 4 100GE ports (1 console port, 1 out-
band port, 48 10GE/GE SFP+ ports, 2 40GE QSFP+ ports, 4 100GE (can expand to 4 10GE ports), 2 power
slots with 2 hot-swap AC220V power supplies; 4 fan slots, including 4 fans; 1U, 19-inch rack-mounted
installation)
Optical Modules 40GE
optical modules
QSFP+LR4-10 40G QSFP+ optical module (100m, 850nm, MPO, DDM, supports 1 to 4)
QSFP+SR4 40G QSFP+ optical module (10Km, 1310nm, LC, DDM)
10GE optical modules
SFP+TX 10GE SFP+-to-RJ45 module
SFP+SX 10GE SFP+ multi-mode (300m, 850nm, LC)
SFP+LX-10 10GE SFP+ single-mode (10Km, 1310nm, LC, DDM)
SFP+LX-20 10GE SFP+ single-mode (20Km, 1310nm, LC, DDM)
SFP+LX-40 10GE SFP+ single-mode (40Km, 1550nm, LC, DDM)
SFP+LX-80 10GE SFP+ single-mode (80Km, 1550nm, LC, DDM)
SFP+LX-SM-1270-10 10GE SFP+ single-mode, single-fiber (10Km, TX1270/RX1330, LC, DDM) 10GE SFP+
SFP+LX-SM-1330-10 single-mode, single-fiber (10Km,TX1330/RX1270, LC, DDM)
SFP+LX-SM-1270-20 10GE SFP+ single-mode, single-fiber (20Km, TX1270/RX1330, LC, DDM) 10GE SFP+
SFP+LX-SM-1330-20 single-mode, single-fiber (20Km,TX1330/RX1270, LC, DDM)
SFP+LX-SM-1270-40 10GE SFP+ single-mode, single-fiber (40Km, TX1270/RX1330, LC, DDM) 10GE SFP+
SFP+LX-SM-1330-40 single-mode, single-fiber (40Km,TX1330/RX1270, LC, DDM)
GE Optical Modules
GSFP-TX-B GE SFP-to- RJ45 module
GSFP-SX-D GE SFP multi-mode (500m, 850nm, LC, DDM)
GSFP-LX-10-D GE SFP single-mode (10Km, 1310nm, LC, DDM)
GSFP-LX-20-D GE SFP single-mode (20Km, 1310nm, LC, DDM)
GSFP-LX-40-D GE SFP single-mode (40Km, 1310nm, LC, DDM)
GSFP-ZX-80-D GE SFP single-mode (80Km, 1550nm, LC, DDM)
GSFP-ZX-120-D GE SFP single-mode (120Km, 1550nm, LC, DDM)
GSFP-LX-SM1310-10-BIDI GE SFP single-mode, single core bidirectional (10Km, TX1310/RX1550, LC, DDM) GE SFP
GSFP-LX-SM1550-10-BIDI single-mode, single core bidirectional (10Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-20-BIDI GE SFP single-mode, single core bidirectional (20Km, TX1310/RX1550, LC, DDM) GE SFP single-
GSFP-LX-SM1550-20-BIDI mode, single core bidirectional (20Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-40-BIDI GE SFP single-mode, single core bidirectional (40Km, TX1310/RX1550, LC, DDM) GE SFP single-
GSFP-LX-SM1550-40-BIDI mode, single core bidirectional (40Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1490-80-BIDI GE SFP single-mode, single core bidirectional (80Km, TX1490/RX1550, LC, DDM) GE SFP single-
GSFP-LX-SM1550-80-BIDI mode, single core bidirectional (80Km, TX1550/RX1490, LC, DDM)
GSFP-LX-SM1490-120 GE SFP single-mode, single core bidirectional (120Km, TX1490/RX1550, LC, DDM) GE SFP single-
GSFP-LX-SM1550-120 mode, single core bidirectional (120Km, TX1550/RX1490, LC, DDM)