Product Information BAT54-Rail
Product Information BAT54-Rail
Product Information BAT54-Rail
BAT54-Rail
Name BAT54-Rail
Dualband Industrial Wireless LAN Access Point/Client with two independent radio modules with IEEE 802.11a/b/g/h/i replaced by order number: 943 926-021
Delivery informations
Availability not available
Product description
Description Dualband Industrial Wireless LAN Access Point/Client with two independent radio modules with IEEE 802.11a/b/g/h/i
replaced by order number: 943 926-021
Port type and quantity 2 x WLAN interfaces, up to 8 SSIDs per WLAN interface, two LAN ports 10/100BASE-TX, autosensing, Power over Ethernet according to IEEE 802.3af
Type BAT54-Rail
Order No. 943 926-001
Radio technology
Antenna connector 4 x RP-SMA jack antenna connectors
Range Up to 20 km with external antenna (depending on type of antenna, frequency range and data rate)
Frequency band 2 x independent radio modules, each 2.4 GHz and 5 GHz:
2400-2483,5 MHz (ISM) and 5150-5850 MHz
Modulation 22M0F7D(DSSS/OFDM) @ 2.4 GHz
20M0G7D (OFDM) @ 5 GHz
Radio topology WLAN access point, bridge, router, point-to-point, client, client-bridge mode, fixed mesh with RSTP
Power requirements
Operating voltage 2 x DC 24 V; DC 12 V external power supply (230 V)
2 x Power over Ethernet according to IEEE802.3af; all power supllies redundant to each other
Current consumption at 24 V DC 417 mA
Current consumption DC 12 V: 625 mA; DC 24 V: 417 mA; PoE (48 V DC): 167 mA
Ambient conditions
Operation temperature -30 ºC to +50 ºC
Storage/transport temperature -40 ºC to +70 ºC
Relative humidity (non-condensing) max. 95%
MTBF 43.3 years
Mechanical construction
Dimensions (W x H x D) 80 mm x 100 mm x 135 mm
Mounting for wall and Din Rail mounting
Protection class IP 40
Approvals
Safety of information technology equipment EN 60950
Radio EN 300328, EN 301893, notified in all countries of EU.
For other notifications or certifications please refer to [email protected]
Environmental EN 61131, EN 61131 for operation in automation environment EMC test documentation for E1 certification (cars and vehicles) available
Scope of delivery and accessories
Scope of delivery device, CD, serial cable, Ethernet cable (3 m), 2 x 3-dBi-dipol - dualband antennas, 2 x 50 Ohm terminators, rail mount material
Accessories to order separately external antennas for 802.11b/g and 802.11a/h operation; adapter cable and surge arrestor
21-10-2015
Hirschmann Automation and Control GmbH www.beldensolutions.com Page 1 of 2
For more information please contact:
Hirschmann Automation and Control GmbH
Stuttgarter Strasse 45-51
72654 Neckartenzlingen
Germany
Phone: +49 7127/14-1809
E-Mail: [email protected]
The information published in the websites has been compiled as carefully as possible. It is subject to alteration without notice in technical as well as in price-related/commercial respect.
The complete information and data were available on user documentation. Mandatory information can only be obtained by a concrete query.
21-10-2015
Hirschmann Automation and Control GmbH www.beldensolutions.com
Page 2 of 2