Scribd Logo
Upload

Welcome to Scribd!

  • 172 views

    CORSON (C7025) : Cu-Ni-Si ALLOY

    Uploaded by

    strip1
    C7025 is a copper-nickel-silicon alloy with high strength, moderate electrical conductivity, good bending properties, and heat resistance. It has the following typical composition: copper base, 2.2-4.2% nickel, 0.25-1.2% silicon, and 0.05-0.3% magnesium. C7025 has good stress corrosion resistance and is mainly used in electrical contacts, automotive terminals, lead frames, and IC terminals due to its balanced mechanical and electrical properties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CORSON (C7025) : Cu-Ni-Si ALLOY

    Uploaded by

    strip1
    172 views2 pages
    C7025 is a copper-nickel-silicon alloy with high strength, moderate electrical conductivity, good bending properties, and heat resistance. It has the following typical composition: copper base, 2.2-4.2% nickel, 0.25-1.2% silicon, and 0.05-0.3% magnesium. C7025 has good stress corrosion resistance and is mainly used in electrical contacts, automotive terminals, lead frames, and IC terminals due to its balanced mechanical and electrical properties.

    Original Description:

    Copper Nickel Silicon alloy datasheet

    Original Title

    C7025

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    C7025 is a copper-nickel-silicon alloy with high strength, moderate electrical conductivity, good bending properties, and heat resistance. It has the following typical composition: copper base, 2.2-4.2% nickel, 0.25-1.2% silicon, and 0.05-0.3% magnesium. C7025 has good stress corrosion resistance and is mainly used in electrical contacts, automotive terminals, lead frames, and IC terminals due to its balanced mechanical and electrical properties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    172 views2 pages

    CORSON (C7025) : Cu-Ni-Si ALLOY

    Uploaded by

    strip1
    C7025 is a copper-nickel-silicon alloy with high strength, moderate electrical conductivity, good bending properties, and heat resistance. It has the following typical composition: copper base, 2.2-4.2% nickel, 0.25-1.2% silicon, and 0.05-0.3% magnesium. C7025 has good stress corrosion resistance and is mainly used in electrical contacts, automotive terminals, lead frames, and IC terminals due to its balanced mechanical and electrical properties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CORSON(C7025)

    Cu- N i- Si AL LO Y

    1、Characteristic：
    ■ Cu-Ni-Si Special Alloy
    ■ High strength、middle electrical conductivity
    ■ Good bending characteristics and heat resistance
    ■ Good stress corrosion resistance
    ■ Mainly applicable to electrical contacts、automobile terminals、lead frame、IC terminals

    2、Chemical Composition：
    Chemical Composition %
    Alloy
    Cu Ni Si Mg
    C7025 Bal. 2.2~4.2 0.25~1.2 0.05~0.3

    3、Physical Properties：
    Characteristic C7025

    Melting point ℃ (Liquid) 1095

    Melting point ℃ (Solid) 1075

    Density (gm/cm3) (20℃) 8.82

    Coefficient of Thermal Expansion


    17.3
    (10-6/℃ 20℃～100℃)
    Thermal Conductivity 0.40
    (cal/cm2/cm/sec/℃ 20℃) (167 W/mk)
    Electrical Conductivity (Annealing)
    40
    (IACS%)
    Modulus of Elasticity
    13500
    (kgf/mm2)

    4、Mechanical Properties：
    Mechanical Porperties
    Alloy Temper
    TS (N/mm2) Ys (N/mm2) EL(%) Hv(500g)
    O 620~755 ≧500 ≧10 180~210
    1/2 H 655~825 585~760 ≧7 200~230
    C7025
    3/4H 685~860 655~830 ≧5 220~250
    H 795~900 ≧700 ≧1 240~270
    5、Characteristic location：
    100

    80 C19210
    C1441
    Conductivity (IACS% )
    C194
    60

    C7025
    40 C5050
    C50715
    C2600/ C50710
    20 C2680 C4450

    C5111
    C5240
    0 C5191 C7701
    300 400 500 600 700 800
    Tensile Strength(N/mm2)

    6、Bending Properties：

    (1)90o bending test：(t≦0.3 )


    Test method：JIS Z 2248
    Thickness R/t R/t
    Temper
    mm Direction (min)
    0 0.5 1.0 1.5 2.0 2.5 3.0
    Good way ▲ ○ ◎ ◎ ◎ ◎ ◎ 0.5
    O ≦0.3
    Bad way ▲ △ ◎ ◎ ◎ ◎ ◎ 0.5
    Good way ▲ ▲ ○ ◎ ◎ ◎ ◎ 1.0
    1/2H ≦0.3
    Bad way ▲ ▲ △ ○ ◎ ◎ ◎ 1.0
    Good way ▲ ▲ ▲ ○ ◎ ◎ ◎ 1.5
    3/4H ≦0.3
    Bad way ▲ ▲ ▲ △ ○ ◎ ◎ 1.5

    Determination：▲：Crack(Failed)、△：Big wrinkles(Qualified) 、○：Small wrinkles(Qualified)、◎：Good (Qualified)

    (2)180o bending test：(t≦0.3 )


    Test method：JIS Z 2248
    Thickness R/t R/t
    Temper mm Direction (min)
    0 0.5 1.0 1.5 2.0 2.5 3.0
    Good way ▲ ▲ △ ◎ ◎ ◎ ◎ 1.0
    O ≦0.3
    Bad way ▲ ▲ △ ○ ◎ ◎ ◎ 1.0
    Good way ▲ ▲ ▲ ▲ ◎ ◎ ◎ 2.0
    1/2H ≦0.3
    Bad way ▲ ▲ ▲ ▲ △ ○ ◎ 2.0
    Good way ▲ ▲ ▲ ▲ ▲ ▲ ○ 3.0
    3/4H ≦0.3
    Bad way ▲ ▲ ▲ ▲ ▲ ▲ △ 3.0

    Determination：▲：Crack(Failed)、△：Big wrinkles(Qualified) 、○：Small wrinkles(Qualified)、◎：Good (Qualified)

    You might also like