Latin America

LG INVERTER
SINGLE PACKAGE (HEAT PUMP)

LG Electronics Distributed by
http://www.lge.com
http://partner.lge.com
http://lghvacstory.com

Copyright © 2019 LG Electronics. All rights reserved.

WHY
LG INVERTER
SINGLE PACKAGE ?

WORLD’S FIRST 25RT HEAT PUMP EASY ACCESS

LG launches the world’s first 25RT Inverter Heat pump Single package Hinged doors made it easy to service components
3rd party compatible 2 inch filter

CONVENIENCE
Direct drive fan motor
Easy set-up method (by ESP function)

ULTIMATE PERFORMANCE
High efficient ultimate inverter compressor
Applied BLDC motors for all fans
Highest level *IEER 18.3
* The value is based on 25RT model.

2 3
HIGH EFFICIENCY HIGHEST LEVEL IEER
LG inverter single package achieved a high efficiency of IEER 18.3 with all inverter technology.

EER IEER
18.3
Highest Level
Highest Level IEER

Efficiency (Btu / Wh)

Efficiency (Btu / Wh)

12 18
High Partial Load Efficiency 10.6 17.9
11 17
Energy Savings with Linear Control 10 10.6 10.6 10.5 16 16.8
10.2
High Efficiency Heat Pump 9 15 15.5
15.0
Annual Energy Savings Estimation
Payback
Dual Sensing Control
0 0
A Co. B Co. C Co. D Co. LG A Co. B Co. C Co. D Co. LG

※ Control method of cooling operation ※ The values are based on registered models of AHRI ('19.02)
- A Company : 4 stage control - D Company : 2 stage control - AHRI Type : SP-A, HSP-A
- B Company : 4 stage control - LG : Inverter control - Capacity : 25RT
- C Company : 2 stage control

HIGH PARTIAL LOAD EFFICIENCY

Inverter compressor maximizes energy efficiency, by adjusting energy supply as required.

Energy saving concept comparison

Constant Speed Compressor

Supply of Energy
WASTE OF
ENERGY
Required Energy

100% Operation 100% Operation 100% Operation

09:00 12:00 14:00 16:00 18:00 Time

Inverter Compressor

Supply of Energy
Required Energy

Maximized
Energy
40% Operation 100% Operation 40% Operation Efficiency

09:00 12:00 14:00 16:00 18:00 Time

4 5
 HIGH EFFICIENCY

ENERGY SAVING WITH LINEAR CONTROL ANNUAL ENERGY SAVINGS ESTIMATION (Panama City)
New inverter single package be operated linearly with wide operating range(30~120Hz). It provides optimized cooling Electricity consumption are expected to decline by 21% compared to on/off model.
and energy saving at the same time.
Electricity Consumption Electricity Cost
OA Temperature Coverage of Energy Saving LG Linear Control (30~120Hz) On/off Control (4 stage)
(℃) 82,868 15,480
kWh/year USD/year
40
Cooling Load1) 65,560 12,247
100% 35 kWh/year USD/year
21% 21%
Decrease Decrease

75% 27.5

On/off Inverter On/off Inverter

Supply ▶ Electric charges : 0.1868 USD/kWh
of
50% 20 Energy (It may vary by region)
[Condition]
Required
Energy - Capacity : 25RT Single Package
25% 18.3 - Operating time : 08:00~20:00
- Cooling partial load and power consumption calculated based on yearly weather data (target indoor temperature : 24℃)
※ This result can be different depending on actual environment

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Time

1) Cooling load is standard of AHRI 340/360 (IEER) :

100% Load = 35℃ (95℉), 75% Load = 27.5℃ (81.5℉), 50% Load = 20℃ (68℉), 25% Load = 18.3℃ (65℉) PAYBACK (Panama City)
If you purchase the LG smart inverter, You can get back your investment cost after 1 Year 5 months.

HIGH EFFICIENCY HEAT PUMP 27,781 $ (21%)

Currency (USD) Cost saving after 10 years
New inverter single package provides both heating and cooling while saving energy.
180,000

CONVENTIONAL NEW INVERTER On/off Inverter 163,248 $

160,000
- High initial investment cost by installing electric heater for heating - No initial investment due to no need for heater installation
- High electricity charges by auxiliary device for heating 140,000
135,466 $
- Annual energy savings with high efficiency heat pump system
120,000

3.24
100,000
1 Year 5 Months
80,000
Additional Cost
(About 5% of product price)
60,000

40,000

1.0
Max 20,000

Unit (Cooling only) + Electric Heater2) Energy Efficiency1) Unit (Heat pump) Energy Efficiency1) 0 1 2 3 4 5 6 7 8 9 10
(W / W) (W / W) Years
[Conditions]
1) Energy efficiency is based on the following conditions : - Capacity : 25RT Single Package
- Indoor Temp. 21.1°C(70°F) DB / 15.6°C(60°F) WB - Operating time : 08:00~20:00
- Outdoor Temp. 8.3°C(47°F) DB / 6.1°C(43°F) WB ※ This result can be different depending on actual environment - Cooling partial load and power consumption calculated based on yearly weather data (target indoor temperature : 24℃)
2) Specification : 25kW / 460V / 3Φ / 60Hz (In regions with low load condition, the efficiency of H/P product is higher.) ※ This result can be different depending on actual environment

6 7
 HIGH EFFICIENCY

ANNUAL ENERGY SAVINGS ESTIMATION (Mexico, Monterrey) ANNUAL ENERGY SAVINGS ESTIMATION (Mexico, Cancun)
Electricity consumption are expected to decline by 31% compared to on/off model. Electricity consumption are expected to decline by 29% compared to on/off model.

Electricity Consumption Electricity Cost Electricity Consumption Electricity Cost

50,745 142,189 68,898 193,052

kWh/year MXN/year kWh/year MXN/year
34,778 97,449 48,994 137,281
kWh/year MXN/year kWh/year MXN/year
31% 31% 29% 29%
Decrease Decrease Decrease Decrease

On/off Inverter On/off Inverter On/off Inverter On/off Inverter

▶ Electric charges : 2.802 MXN/kWh ▶ Electric charges : 2.802 MXN/kWh

[Conditions] (It may vary by region) [Conditions] (It may vary by region)
- Capacity : 25RT Single Package - Capacity : 25RT Single Package
- Operating time : 08:00~20:00 - Operating time : 08:00~20:00
- Cooling partial load and power consumption calculated based on yearly weather data (target indoor temperature : 24℃) - Cooling partial load and power consumption calculated based on yearly weather data (target indoor temperature : 24℃)
※ This result can be different depending on actual environment ※ This result can be different depending on actual environment

PAYBACK (Mexico, Monterrey) PAYBACK (Mexico, Cancun)

If you purchase the LG smart inverter, You can get back your investment cost after 2 years. If you purchase the LG smart inverter, You can get back your investment cost after 1 year 8 months

358,200 $ (29%) 468,517 $ (29%)

Currency (MXN) Cost saving after 10 years Currency (MXN) Cost saving after 10 years
1,800,000 2,500,000
On/off Inverter On/off Inverter
1,600,000
1,587,542 $ 2,096,175 $
2,000,000
1,400,000

1,229,342 $ 1,627,658 $
1,200,000
2 Years 1,500,000
1,000,000
1 Year 8 Months
800,000
1,000,000

600,000

400,000 500,000

200,000

0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10

[Conditions]
Years [Conditions]
Years
- Capacity : 25RT Single Package - Capacity : 25RT Single Package
- Operating time : 08:00~20:00 - Operating time : 08:00~20:00
- Cooling partial load and power consumption calculated based on yearly weather data (target indoor temperature : 24℃) - Cooling partial load and power consumption calculated based on yearly weather data (target indoor temperature : 24℃)
※ This result can be different depending on actual environment ※ This result can be different depending on actual environment

8 9
 HIGH EFFICIENCY

PAYBACK
Cooling load according to temperature change Cooling load according to humidity change
You can easily simulate on mobile via payback app. (Install “LG SCAC / RAC Inverter Payback”)
Latent heat load Latent heat load
Sensible heat load Sensible heat load Dual
Single sensing
Dual
sensing operation
sensing
operation
operation

Cooling Load
Dual
Sensing
Control

27 oC 35 oC 46 oC Temperature 35 oC (30 %) 35 oC (50 %) 35 oC (70 %)

Temperature
(Humidity)

Dry condition
Dual sensing control is a function that changes evaporation temperature according to temperature & humidity.

CONVETNTIONAL NEW INVERTER

-Excessive latent heat elimination regardless of humidity - Comfortable environment by making the room less dry
-Waste Energy to eliminate latent heat - Increased Seasonal Efficiency

Dry Dry
35℃ 40%2) 35℃ 40%2)
DUAL SENSING CONTROL Summer Summer

Comfort Comfort
New model can be operated by dual sensors for comfort and efficient operation. (Temperature & Humidity) 30% 70% 30% 70%
Te 1) Te 1) + α
Refrigerants Refrigerants

Low High Low High

Why do we need dual sensing?
To operate energy saving and comfort cooling, humidity sensing is required. 1) Te : Evaporation Temperature 2) Temperature & humidity of outdoor

Wet condition
In wet summer season, the system senses the high humidity level and increases operating ratio to decrease humidity level rapidly for making
Humidity Sensor room condition in comfort zone.

CONVETNTIONAL NEW INVERTER

- High humidity condition is not considered by only sensing the - Comfortable environment
room temperature - With quick latent heat elimination by sensing humidity
- General latent heat elimination regardless of humidity - At higher humidity, the compressor runs more powerfully

Wet Wet
35℃ 85%2) 35℃ 85%2)
Summer Summer

Temp.(C°)

Temp.(C°)
Te 1) Te 1) - α
Refrigerants Refrigerants
Target Target

Time Time

1) Te : Evaporation Temperature 2) Temperature & humidity of outdoor

10 11
CONVENIENCE DIRECT DRIVE FAN MOTOR
Easy maintenance
Beltless direct drive system is easy to maintain and cost effective.

CONVENTIONAL NEW INVERTER

Direct Drive Fan Motor
- Adjust pulley and belt periodically - No need to adjust pulley and belt periodically
Convertible Duct Connection - Grease periodically - No need to grease periodically
Enhanced Structure - High cost of replacement and repair with large number of parts - Low cost of replacement and repair with fewer parts

Sliding Type Filter

Pulley V belt Pulley

Additional parts No additional parts

(Reduced parts and labor costs)

Easy installation
By applying a high static pressure motor, It has wide E.S.P coverage and easy to set the air volume.

CONVENTIONAL NEW INVERTER

- It is necessary to change the pulley and motor to change airflow - Set RPM by simple touch on remote control to change airflow

Simple setup

High 140

※ ESP Setting guide (Wired Remote Controller) :

Pulley change Turn adjust Motor change - Standard III (PREMTB100/10) : Menu → Setting → Installer → ESP setting
(Variable pulley) - Standard II (PREMTB001/01) : Button click → 03 : XX → ESP setting

※ Motor operation range (Based on 9,400 CFM) ※ Motor operation range (Based on 9,200 CFM)

Standard Medium High High

0.1 0.4 0.5 1.0 1.1 1.4 0 in.Aq Largest 10HP BLDC Motor 2.0 in.Aq
in.Aq in.Aq in.Aq in.Aq in.Aq in.Aq

12 13
 CONVENIENCE

CONVERTIBLE DUCT CONNECTION ENHANCED STRUCTURE

*One model allows duct installation in various directions and can be installed on various sites. Additionally, By applying the hinged door, Installation & maintenance working time has been shortened. In addition,
LG 3D PLUG FAN minimizes the flow resistance and enables to take out the air in all directions, so there is no air loss. 3 way fork lift holes easy to carry the product in various places and pop nut structure increases screw wear reliability.

Horizontal Airflow

m/s
20.0
19.0
18.0
17.0
16.0
Equivalent Airflow 15.0 Convenient Hinged Door (Default) 3 Way Fork Lift Holes Pop Nut with Improved Wear
regardless duct connection 14.0
13.0
12.0
11.0
10.0 Fan
Supply Air 9.0
(100%) 8.0
7.0
6.0 Electric Cycle
5.0
4.0
3.0
2.0
※ The result of CFD simulation
1.0

Convertible Panel

SLIDING TYPE FILTER

Easy maintenance and extended product life with sliding type filter. The pre-filter is easy to clean with water and
replaceable 2 inch filter can also be installed.
Vertical Airflow
Easy Sliding Sliding
m/s
20.0 Filter Rack
19.0
Convertible Panel
18.0
17.0
16.0
Equivalent Airflow 15.0 Filter Rack
regardless duct connection 14.0
13.0
12.0
11.0
10.0 Easy Cleaning
9.0
8.0 with Water
7.0
6.0
5.0
4.0
3.0
2.0
Supply Air
1.0
(100%)
Replaceable
※ The result of CFD simulation 2 inch Filter1)

1) Specification : 25 x 20 (in.) x 6 (EA)

* With one model, It can be installed either horizontally or vertically. However, competitors have separate models depending on the type of connection. ※ When 2inch filter is applied, Static pressure drops by 0.142 in.Aq.

14 15
RELIABILITY ULTIMATE INVERTER COMPRESSOR
By applying world class technology of Multi V, High efficient and reliable operation has been achieved. 18 years of
inverter technology applied to LG new single package.

CONVENTIONAL NEW COMPRESSOR

Ultimate Inverter Compressor
Protection for Voltage Fluctuation - Inner bearing type - Increased durability and reliability with outer bearing type
- Low speed operation with unstable structure - High speed operation with reduction of bearing load and vibration
Black Fin
1

1
3 3
3 3
2
2

6.8 HP 9.6 HP

1 1 Material : PTFE 1) 1 1 Material : PEEK 2)

2 Structure : Inner Bearing 2 Structure : Outer Bearing
EXTREME 2
1
3 Supporter
2
1
3 Supporter
DURABILITY
1) PTFE : Polytetra fluoro ethylene
2) PEEK : Polyether ether ketone
※ Conventional : JBA068MAC (6.8 HP) x 2EA in product
New inverter : JBA096MAC (9.6 HP) x 2EA in product

PROTECTION FOR VOLTAGE FLUCTUATION

Below low voltage limit, inverter compressor reduces frequency(Hz) and boost DC voltage, over high voltage limit,
cuts off the relay to prevent damage of DC capacitor. And inverter is able to operate at a wider voltage range than
constant speed model.

Constant LG Inverter No loss of capacity

Low & High Automatic detection
No protection logic
Voltage detection and blocking
Operable Range
CT(Current transformer) Inverter control
On/off operation
current limit without stopping
Automatic detection
DC peak detection No need
and blocking
Continuous
N phase reverse wiring Operation Range
(3 phase only)
No detection Automatic detection

Missing phase detection

(3 phase only)
No detection Automatic detection

391 414 460 506 529

(-15%) (-10%) (Rated) (+10%) (+15%)

Product Voltage

Protection ※ The allowable operation range is ±10% of rated voltage (460V).

※ This result can be different depending on actual environment.

16 17
 RELIABILITY

BLACK FIN
The black coating with enhanced epoxy resin is applied for strong protection from various corrosive external conditions Black Fin‘s performance of corrosion resistance is improved based on Gold fin.
such as salt contamination and air pollution including fumes from factories. This improvement in durability prolongs the
product’s lifespan and lowers both the operational and maintenance costs.

Longer Lifespan, Lower Maintenance Costs SST (Salt Spray Test)

Test Process Test Result (5% Area of defects compared to initial)
1,950 hr

1,000 hr
95%

Fog 1)
(35℃, 24hr)
Hydrophilic Film (Water Flow)
The Hydrophilic coating minimizes moisture buildup on the fin.
Process
Acryl + Epoxy + Melamine Resin (Corrosion Resistant)
repeated
The Black coating provides strong protection from corrosion.
Wide Louver Fin Gold Fin Black Fin
Test process is conducted according to ISO 9227.
1) Salty water concentration : NaCl aqueous solution (5%)

100% copper material to prevent

corrosion & refrigerant leakage

CCT (Cyclic Corrosion Test)

Test Process Test Result (5% Area of defects compared to initial)

1,300 hr

500 hr 160%

Fog 1) Dry Wet 2)

(35℃, 2hr) (70℃, 2hr) (50℃, 2hr)

Process
Repeated
Gold Fin Black Fin
Test process is conducted according to ISO 14933.
1) Salty water concentration : NaCl aqueous solution (5%)
※ Verification of corrosion resistance performance. ※ Dry condition changed : 60℃, 4hr → 70℃, 2hr
2) Deionized water

100% copper material to prevent

corrosion & refrigerant leakage

18 19
CUSTOMIZED CONTROL

NEW DESIGN REMOTE CONTROLLER 3rd PARTY BMS SYSTEM COMPATIBILITY

LG Individual controller provides intuitive GUI with color LCD and touch type interface button. LG Inverter Single Package can be connected with gateway products for different protocols such as Modbus, BACnet
and LonWorks. And gateway product offers self diagnosis interface thanks to smart GUI included.

LG HAVC System LG BMS Gateway BMS System

4.3” Color Display & Touch Button Yearly Schedule

LG BMS
Protocol ACP BACnet1) Protocol
ACP Lonworks

Multi V

5” Touch Push
Touch screen Button Button

Premium Standard III Standard II

(PREMTA000) (PREMTB100) (PREMTB001) AC Smart BACnet
Single / Multi
※ Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.

GROUP CONTROL
Group Control is to control multiple units at once. This is the appropriate solution for zoning the big area as a one
ERV
control zone.
Max. 16 unit Good Looking Interior
Connections available

Single Package

Conventional New
Self Diagnosis

Controller & Installation Cost Saving

Save

1) ACP BACnet (Modbus) Interface : PQNFB17C0

ACP LonWorks (Modbus) Interface : PLNWKB000

20 21
 CUSTOMIZED CONTROL

LOW NOISE OPERATION EASY SCHEDULING

The Low-Noise Operation is possible regardless of the time where noise sensitive areas. Instead of installer setting, Schedule function allows customers to arrange the operation setting of equipment according to their desired schedule.
the low noise operation is set by a building manager easily. Customers easily schedule daily, weekly, monthly, yearly plan with a calendar, also an exception date enables patterned
schedule.
ACP / AC Smart ACP EZ Touch
Conventional
Outdoor Unit setting only

Load Only outdoor unit dip switch

setting is possible.
Premium R/C Standard III R/C

Sound level Off (Basic time) Low-noise operation time

On
09:00 13:00 18:00 21:00 00:00 09:00
Highest Start End
outdoor temp.

New Inverter
Standard III wired remote controller setting possible 2 SET POINT CONTROL
Auto Changeover can manage room temperature with changing Heating/cooling mode and Compressor-off
automatically. With setting heating and cooling set temperature just one time, comfortable condition will continue at all
times. It is also possible to reduce the energy use by broadening the set temperature gap of cooling and heating.
Indoor temperature (℃)

Load Cooling Set

Cooling Mode (Comp. Off) (18 ~ 30℃)
+0.5℃
Scheduled setting available
Sound level Remote controller -0.5℃

Low-noise operation setting is possible.

Fan Mode (Comp. Off) * Dead Band
On
Off
+0.5℃
09:00 13:00 18:00 09:00
Start End -0.5℃
Heating Set
※ Low-Noise Operation requires Standard III wired Remote controller.
Heating Mode (Comp. On) (18 ~ 30℃)

Summer Autumn Winter Spring

※ 2 Set point control requires Standard III or Premium wired remote controller.
- Model : PREMTB100(Standard III), PREMTA000 / PREMTA000A / PREMTA000B (Premium)
* Minimum temperature gap : Setting value (0~5℃)

22 23
SPECIFICATIONS

460 V 380 V
Nominal Capacity RT 20 25 Nominal Capacity RT 20 25
Model Name - AK-W240DC00 AK-W300DC00 Model Name - AK-W240LC00 AK-W300LC00
kW 70.3 80.9 kW 70.3 80.9
Cooling Capacity Net Capacity kcal/h 60,480 69,552 Cooling Capacity Net Capacity kcal/h 60,480 69,552
Btu/h 240,000 276,000 Btu/h 240,000 276,000
kW 70.3 80.9 kW 70.3 80.9
Heating Capacity Net Capacity kcal/h 60,480 69,552 Heating Capacity Net Capacity kcal/h 60,480 69,552
Btu/h 240,000 276,000 Btu/h 240,000 276,000
EER Btu / Wh 11.3 10.6 EER Btu / Wh 11.3 10.6
IEER Btu / Wh 19.0 18.3 IEER Btu / Wh 19.0 18.3
COP W/W 3.38 3.24 COP W/W 3.38 3.24
Cooling kW 21.3 26.0 Cooling kW 21.3 26.0
Power Input Power Input
Heating kW 20.8 25.0 Heating kW 20.8 25.0
Power Supply V, Ø, Hz 460, 3, 60 460, 3, 60 Power Supply V, Ø, Hz 380, 3, 50/60 380, 3, 50/60
Fin Type - LG Louver LG Louver Fin Type - LG Louver LG Louver
Tube Size Outer Dia. mm (inch) 9.52 (3/8) 9.52 (3/8) Tube Size Outer Dia. mm (inch) 9.52 (3/8) 9.52 (3/8)
Indoor Coil Indoor Coil
(Row × Column × Fins per inch) × No. - (4 × 44 × 16) × 2 (4 × 44 × 16) × 2 (Row × Column × Fins per inch) × No. - (4 × 44 × 16) × 2 (4 × 44 × 16) × 2
Face Area m (ft )
2 2
2.01 (21.6) 2.01 (21.6) Face Area m2 (ft2) 2.01 (21.6) 2.01 (21.6)
Type - Plug Fan Plug Fan Type - Plug Fan Plug Fan
Diameter mm (inch) 630 (25) 630 (25) Diameter mm (inch) 630 (25) 630 (25)
Motor Output W × No. 10.0 10.0 Motor Output W × No. 10.0 10.0
Indoor Fan Indoor Fan
Nominal m3/min 227 261 Nominal m3/min 227 261
Air Flow Rate Air Flow Rate
Nominal ft3/min 8,000 9,200 Nominal ft3/min 8,000 9,200
Drive Type - Direct Direct Drive Type - Direct Direct
Type - HCC DC SCROLL HCC DC SCROLL Type - HCC DC SCROLL HCC DC SCROLL
Compressor Motor Output W × No. 5,500 × 1 5,500 × 1 Compressor Motor Output W × No. 5,500 × 1 5,500 × 1
(#1, A Cycle) Oil Type - FVC68D FVC68D (#1, A Cycle) Oil Type - FVC68D FVC68D
Oil Charge cc × No. 1,500 × 1 1,500 × 1 Oil Charge cc × No. 1,500 × 1 1,500 × 1
Type - HCC DC SCROLL HCC DC SCROLL Type - HCC DC SCROLL HCC DC SCROLL
Compressor Motor Output W × No. 5,500 × 1 5,500 × 1 Compressor Motor Output W × No. 5,500 × 1 5,500 × 1
(#2, B Cycle) Oil Type - FVC68D FVC68D (#2, B Cycle) Oil Type - FVC68D FVC68D
Oil Charge cc × No. 1,500 × 1 1,500 × 1 Oil Charge cc × No. 1,500 × 1 1,500 × 1
Fin Type - Wide Louver Plus (Black) Wide Louver Plus (Black) Fin Type - Wide Louver Plus (Black) Wide Louver Plus (Black)
Tube Size Outer Dia. mm (inch) 7 (9/32) 7 (9/32) Tube Size Outer Dia. mm (inch) 7 (9/32) 7 (9/32)
Outdoor Coil Outdoor Coil
(Row × Column × Fins per inch) × No. - (3 × 52 × 14) × 2 (3 × 52 × 14) × 2 (Row × Column × Fins per inch) × No. - (3 × 52 × 14) × 2 (3 × 52 × 14) × 2
Face Area m2 (ft2) 4.5 (48.3) 4.5 (48.3) Face Area m2 (ft2) 4.5 (48.2) 4.5 (48.2)
Type - Propeller Fan Propeller Fan Type - Propeller Fan Propeller Fan
Diameter mm (inch) 680 (26-25/32) 680 (26-25/32) Diameter mm (inch) 680 (26-25/32) 680 (26-25/32)
Motor Output W × No. 900 × 4 900 × 4 Motor Output W × No. 900 × 4 900 × 4
Outdoor Fan m3/min × No. 105 × 4 105 × 4 Outdoor Fan m3/min × No. 105 × 4 105 × 4
Air Flow Rate Air Flow Rate
ft3/min × No. 3,700 × 4 3,700 × 4 ft3/min × No. 3,700 × 4 3,700 × 4
Drive - BLDC Inverter BLDC Inverter Drive - BLDC Inverter BLDC Inverter
Discharge Direction - Top Top Discharge Direction - Top Top
Dehumidification Rate ℓ/h 24.1 30.1 Dehumidification Rate ℓ/h 24.1 30.1
Drain Connection Size - NPT 1" NPT 1" Drain Connection Size - NPT 1" NPT 1"
Refrigerant Name - R410A R410A Refrigerant Name - R410A R410A
Precharged A-Circuit kg 9.0 9.0 Precharged A-Circuit kg 9.0 9.0
Refrigerant Refrigerant
Amount B-Circuit kg 9.0 9.0 Amount B-Circuit kg 9.0 9.0
Control - EEV EEV Control - EEV EEV
mm 2,230 × 1,242 × 3,520 2,230 × 1,242 × 3,520 mm 2,230 × 1,242 × 3,520 2,230 × 1,242 × 3,520
Dimensions (W × H × D) Dimensions (W × H × D)
inch 87-25/32×48-29/32×138-19/32 87-25/32×48-29/32×138-19/32 inch 87-25/32×48-29/32×138-19/32 87-25/32×48-29/32×138-19/32
Net Weight kg (lbs) 910 (2,006) 910 (2,006) Net Weight kg (lbs) 910 (2,006) 910 (2,006)
Sound Cooling dB(A) 86 86 Sound Cooling dB(A) 86 86
Power Levels Heating dB(A) 86 86 Power Levels Heating dB(A) 86 86
Operation Range Cooling Min. ~ Max. °C DB (°F DB) -5 ~ 48 (23.0~118.4) -5 ~ 48 (23.0~118.4) Operation Range Cooling Min. ~ Max. °C DB (°F DB) -5 ~ 48 (23.0~118.4) -5 ~ 48 (23.0~118.4)
(Outdoor Temperature) Heating Min. ~ Max. °C WB (°F WB) -15 ~ 18 (5.0~64.4) -15 ~ 18 (5.0~64.4) (Outdoor Temperature) Heating Min. ~ Max. °C WB (°F WB) -15 ~ 18 (5.0~64.4) -15 ~ 18 (5.0~64.4)

24 25
MEMO

26 27