Cikojoint WS: One Component Swellable Sealant and Adhesive

Technical Data
Sheet
CIKOjoint WS
One component Swellable Sealant and adhesive
Description Physical properties

CIKOjoint WS is a one component swellable Colour Grey
sealant and adhesive based on MS hybrid Processing
polymers. Fixing glue ensures fast and strong Temperature with 50% +5 up to +40OC
fixation of water swellable sealing bars to RH
concrete. The fast skin formation and curing Volume change (DIN
allows concrete casting after a few hours. Approximately 6%
52451)
Moreover, CIKOjoint WS fixing glue has Consistency Very Thixotropic
excellent adhesion strength even on wet
concrete surfaces. Density (23oC) 1.4 ± 0.05g/cm3
Properties Skin Formation time at Approximately
 Easy to apply, to gun and tool 23 oC / 50% RH 5minutes
 Swell in contact with water Curing Rate (24hrs at
Approximately 3.5mm
 Water tight sealant 23 oC / 50% RH)
 Accommodates cyclic movement due Temperature stability -40 oC up to +90 oC
to thermal expansion and contraction. after curing 200 oC for short time
Hardness shore A
 Good chemical resistance
DIN53505 after 3 weeks 50±2
 Provides excellent bond strength on a storage @ 23 oC/50% RH
wide range of substrates Elongation modulus at Approximately
 Low maintenance cost. 100% (DIN53504 S2) 1.6N/mm2
 Completely weather resistant. Tensile Strength Approximately
 No mixing, less labour (DIN53504 S2) 3N/mm2
 Excellent workability characteristics Elongation at break
Approximately 300%
(DIN53504)
Application area
CIKOjoint WS is a high quality joint sealant and Chemical Resistance
adhesive for exterior and interior applications. It  Good: against water, aliphatic solvents, oils, fat,
is most suitable for, watered inorganic acids and alkalis
 Moderate: against esters, ketone and aromatics.
 As adhesive for swellable bars
 Not resistant: against concentrated acids and
 Sealing the gaps around pipes chlorinated hydrocarbons.
 Parking areas  Completely weather resistant
 Port and docks.
 Flashing termination and floor joints Coverage
 Water structures: CIKOjoint WS cartridge provides coverage as follows.
o Dam Joint size 10mm X 10mm 3m per litre
o swimming pool Joint size 20mm X 10mm 1.5m per litre
o reservoir
o Tanks. Note: Coverage rate may vary depending on joint size.
1
Application instructions Technical Support
Surface preparation For any technical support, do not hesitate to contact CIKO
Clean the joint substrate to make it free from all team at any time as CIKO offers on and off site services
loose particles, dust, oil grease and any other
form of contamination. In case of oil spillage, to end users, specifier and contractors.
proper treatment should be carried out on the
surface. The joint must be free from dampness More from CIKO Middle East
and standing water. A wide range of construction chemical products are
manufactured by CIKO Middle East which includes:
Application as adhesive  Concrete admixtures and additives
 No primer is required when applying  Waterproofing and damp proof coatings
CIKOjoint WS on a clean concrete  Surface treatments
surface.
 Flooring and toppings
 After gluing, the water swellable sealing
bar needs to be pressed down, to  Grouts and anchors
ensure full contact with the glue  Tile adhesives and grout
underneath and achieve optimal  Concrete repair materials
adhesion.  Adhesives and bonding agent
 Protective coating
Packaging  Joint Sealants and Moulding compounds
CIKOjoint WS is available in 290ml cartridges.  Ancillaries
Shelf life
CIKOjoint WS has a shelf life of 15 months in
unopened pails and if stored in accordance with
CIKO instructions.
Storage
CIKOjoint WS should be stored under enclosed
shaded area at temperatures between 5 – 250C.
Health & safety

CIKOjoint WS should not come in contact with
eyes or be swallowed. Ensure adequate
ventilation and avoid inhalation of vapours.
Applicator should wear appropriate clothes,
gloves and goggles. Use of barrier cream is
recommended to provide additional skin
protection. If comes in contact with eyes, flush
with plenty of fresh water and seek medical
advice.
Refer Material Safety Data Sheet for further
details.
TDS/JS18 Rev.:0 Issue:C

Note: The information presented herein based on the best of our knowledge and expertise for which every effort is made to ensure its
reliability. Although all the products are subjected to rigid quality tests and are guaranteed against defective materials and manufacture,
no speciﬁc guarantee can be extended because results depend not only on quality but also on other factors beyond our control

Cikojoint WS: One Component Swellable Sealant and Adhesive

Uploaded by

Copyright:

Available Formats

Cikojoint WS: One Component Swellable Sealant and Adhesive

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cikojoint WS: One Component Swellable Sealant and Adhesive

Uploaded by

Copyright:

Available Formats

Technical Data

Description Physical properties

Health & safety

TDS/JS18 Rev.:0 Issue:C

You might also like