Scribd Logo
Upload

Welcome to Scribd!

  • 259 views

    Anchor Flange

    Uploaded by

    Hector Mejia
    Anchor flanges are pressure retaining fittings that are welded directly into pipelines to provide restraint against axial and lateral forces. They immobilize sections of pipe at predetermined locations and transmit stresses to external structures like concrete foundations. Anchor flanges are designed and manufactured by Namdaran Petrogas Industries to customer specifications based on factors like design code, pipe properties, operating pressure and temperature, and concrete strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Anchor Flange

    Uploaded by

    Hector Mejia
    259 views4 pages
    Anchor flanges are pressure retaining fittings that are welded directly into pipelines to provide restraint against axial and lateral forces. They immobilize sections of pipe at predetermined locations and transmit stresses to external structures like concrete foundations. Anchor flanges are designed and manufactured by Namdaran Petrogas Industries to customer specifications based on factors like design code, pipe properties, operating pressure and temperature, and concrete strength.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Anchor flanges are pressure retaining fittings that are welded directly into pipelines to provide restraint against axial and lateral forces. They immobilize sections of pipe at predetermined locations and transmit stresses to external structures like concrete foundations. Anchor flanges are designed and manufactured by Namdaran Petrogas Industries to customer specifications based on factors like design code, pipe properties, operating pressure and temperature, and concrete strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    259 views4 pages

    Anchor Flange

    Uploaded by

    Hector Mejia
    Anchor flanges are pressure retaining fittings that are welded directly into pipelines to provide restraint against axial and lateral forces. They immobilize sections of pipe at predetermined locations and transmit stresses to external structures like concrete foundations. Anchor flanges are designed and manufactured by Namdaran Petrogas Industries to customer specifications based on factors like design code, pipe properties, operating pressure and temperature, and concrete strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Size: 6" to 56"

    Operating Pressure: Up to 2500 psig


    Namdaran Petrogas
    Industries is a
    leading company
    in the design and
    manufacture
    of process
    and pipeline
    equipments to the
    Oil, Gas and other
    process industries.

    Anchor flange is an important element in many thrust-control


    systems, especially those protecting pipeline pumping or gas stations.
    Welded into the line and encased in concrete, they immobilize the pipe
    at predetermined locations and transfer built-up stresses to external structures.
     Restraining the movement of pipeline sections is a design factor that must be
    considered particularly at points of directional change, connections to equipment at meter run
    locations, at river crossings and for pipe runs at locations of discontinuity of restraint from the
    earth surrounding the line.
     Forged steel anchor flanges are pressure retaining members that butt weld directly into the
    pipeline and provide an integral "flange" which can transmit restraint from an anchor to the pipeline.
     The forces resulting from the restraining anchor are gradually
    absorbed by the fitting without imposing a concentration of stresses on
    the pipeline itself.
     Anchoring devices can be installed in many different ways to accomplish
    partial or complete restraint to axial, vertical lateral or twisting forces. Most
    commonly, they are embedded in a reinforced concrete pit or block.
     Anchor flanges are usually forged of carbon steel which can be heat
    treated to equivalent mechanical properties as that of the mating pipe, or
    can have the hub thickness (wall) at the welding ends made proportionally
    thicker than that of the mating higher yield-strength pipe to compensate
    for the slightly lower mechanical properties of the flange. This increase
    in wall thickness does not result in any objectionable transition across
    the weld and has proven itself in countless applications.
     Anchor flanges are used installations with a variety of operating
    service conditions. For maximum economy, anchor flanges should be
    designed specifically for each application, Accordingly, Namdaran Petrogas
    Ind. Has established a design method which applies to specific service
    conditions. These service conditions involve the thrust through which
    the anchor and pipe will cycle and the allowable bearing stress that can
    be maintained by the concrete adjacent to the anchor.
     Anchor flanges are manufactured to your specifications or we can
    provide design service for your specific criteria.
     The materials supplied from overseas will bear the manufacturer test
    report; materials that supplied from local market will bear the chemical
    analysis and mechanical test report from reputable laboratory.
    ORDERING INFORMATION
    The design conditions determine the overall size and shape of the
    finished flange. So in order to manufacture a flange that meets your
    design criteria, the following information is required:
    1) Design code
    2) Matching pipe nominal size, grade and wall thickness
    3) Design factor
    4) Concrete strength
    5) Maximum, minimum and installation temperature
    6) Design pressure

    CODE & STANDARDS


     Design : ASME Sec. VIII Dev. 1 & 2,
    ANSI B31.8, B31.3 and B31.4
     Fabrication : ASME Sec. VIII
     Welding : ASME Sec. IX
     NDT : ASME Sec. V

    CENTRAL OFFICE
    3rd Floor, No. 12, Naghdi St., North Mofateh St., Tehran-Iran
    Tel: +98 (21) 88522258-60 Fax: +98 (21) 88753763

    SALE OFFICE
    Unit 11, 5th Floor, No. 5, 8th St., Khaled Eslamboli St.,
    Tehran-Iran Tel: +98 (21) 88710234-5 Fax: +98 (21) 88717457

    FACTORY
    No. 61, Keyhan Alley, Shams Abad, Km 35 Qom Highway, Tehran-Iran
    Tel: +98 (21) 56225112-4 Fax: +98 (21) 56225115

    www.namdaran.ir
    [email protected]

    You might also like