Girbau, SA

SLI-23 / SLI-34
Parts Manual

Girbau, SA
Carretera Manlleu, KM1
Vic, Barcelona, España 54380
Teléfono: 3493 886 1100 / Facsímil: 34 93 886 0785

e-mail: [email protected]

Part No. 450287

 Retain This Manual In A Safe Place For Future Reference

This product embodies advanced concepts in engineering, design, and safety. If this
product is properly maintained, it will provide many years of safe, efficient, and trouble
free operation.

ONLY properly licensed technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified

in the installation manual included with the dryer.

FOR YOUR SAFETY POUR VOTRE SÉCURITÉ

Do not store or use gasoline or Ne pas entreposer ni utiliser d’essence
other flammable vapors and ni d’autres vapeurs ou liquides
liquids in the vicinity of this or inflammables à proximité de cet
any other appliance. appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it
useful. Manufacturer reserves the right to make changes from time to time, without notice
or obligation, in prices, specifications, colors, and material, and to change or discontinue
models.

Important
For your convenience, log the following information:

DATE OF PURCHASE ________________________

SLI-23 & SLI-34
MODEL NO. _______________________________________

DEALER’S NAME ________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________
 Girbau, SA
Carretera Manlleu, KM1
Vic, Barcelona, España 54380
Teléfono: 3493 886 1100 / Facsímil: 34 93 886 0785

e-mail: [email protected]

The illustrations on the following pages may not depict your particular dryer exactly. The
illustrations are a composite of the various dryer models. Be sure to check the descrip-
tions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

NOTES ________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________

_______________________________________________________________________________________________
 Parts Diagram

31

4 Girbau, SA 450287-2
Parts List
Detail # 1

Illus. Illus.
No. P/N Qty. Description No. P/N Qty. Description

1 851399 1 SLI-23 & 34 Back guard Assy 19 851522 1 Phase 8 Coin Control Panel
for Gas & Electric (assy complete)
2 851253 1 SLI-23 Left Side Panel Assy 851518 1 Phase 8 OPL Control Panel
851345 1 SLI-34 Left Side Panel Assy (assy complete)
3 851255 1 SLI-23 Right Side Panel Assy 818213 1 Coin Acceptor Assy w/ Optic Switch
851343 1 SLI-34 Right Side Panel Assy 125805 1 Coin Acceptor Only
4 851268 1 SLI-23 Top Panel Assy (25¢ Coin)
851367 1 SLI-34 Top Panel Assy 819264 1 Coin Acceptor Only
5 150445 2 1/4-20 x ¾ Socket Cap Screws (Programmable Euro/UK acceptor)
6 153072 2 ¼ High Collar Lock Washer 887041 1 Optic Switch Only
7 318891 1 Dual Screw Backup Washer 160066 1 Offset Cam for Lock
8 153048 2 Inner Friction Pad 154004 1 Twin Speed Nut
354217 1 ¾ Plate Spacer 160069 1 Lock (ZB7)
(not illustrated) 160169 2 Key (ZB7)
350245 1 Extended Tumbler Shaft 20 185121 1 Lower Panel
(not illustrated) 21 851521 1 Phase 8 Coin Control Panel
9 851372 2 Rear Wheel Tumbler Support (panel only)
Assy Complete 851517 1 Phase 8 OPL Control Panel
180051 1 Replacement Wheel Only (panel only)
10 819295 1 Large Lint Drawer Assy 22 112586 1 Phase 8 OPL Keypad
11 851347 1 SLI-23 Stainless Steel Tumbler 112587 1 Phase 8 Coin Keypad
851370 1 SLI-34 Stainless Steel Tumbler 23 117516 1 Logo Tape
12 102410 1 SLI-23 & SLI-34 Drive Belt 24 819508 1 Control Mount Assy
13 851525 1 Front Tumbler Support Panel 25 137279 1 Phase 8 Microprocessor
(assy complete) 26 350250 1 Computer Board Cover
851371 2 Front Wheel Tumbler Support 27 350203 2 Strain Relief Door Guide Strips
(assy complete) 28 350204 2 Strain Relief Cabinet Guide Strips
180051 1 Replacement Wheel Only 29 154220 4 Button Head Pop Rivet
14 851274 1 Main Door Assy Complete w/ Handle 30 150313 2 10-16 x 5 Torx Screws
31 819196 1 Main Door Switch Assy
103067 3 Door Hinge
813411 1 Door Switch Extension Harness
(not illustrated) (not illustrated)
15 170233 1 Main Door Handle
16 818370 1 Rotation Sensor
Options
17 851384 1 Coin Vault
851409 1 SLI-23 11" Dryer Pedestal
122002 1 Coin Vault Switch (not illustrated)
(not illustrated) 851411 1 SLI-34 11" Dryer Pedestal
18 125916 1 Coin Box with 2/Keys (not illustrated)
(note: each lock keyed different)

450287-2 [email protected] 5
 Parts Diagram
Detail # 2

6 Girbau, SA 450287-2
Parts List
Detail # 2

Illus. Illus.
No. P/N Qty. Description No. P/N Qty. Description

Drive Motors 20 350226 1 Rear Gas Pipe Support

21 851387 1 Burner Funnel Transition Assy
1 851442 1 SLI-23 & SLI-34 60hz Motor 22 154200 14 5/32 Pop Rivets
Assy with Mount 23 130500 2 Radiant Heat Sensor
181127 1 SLI-23 & SLI-34 60hz Motor only 24 350217 1 Burner Funnel Top Lip Bracket
851443 1 SLI-23 & SLI-34 50hz Motor 25 128910 2 Hot Surface Ignitor 80v
Assy with Mount 26 350218 1 Burner Funnel Support Bracket
181126 1 SLI-23 & SLI-34 50hz Motor only 27 152014 4 ¼-20 Free Spin Nut
2 851285 1 Motor Mount Clinch Nut Assy 28 350221 1 Dual Round Gas Burner Support Bracket
3 851284 1 Motor Mount Base Assy 29 150331 19 8-18 x ½ Pan Head Torx Screw
4 154266 2 5/16-18 Shoulder Bolt 30 350253 1 Front Gas Pipe Bracket
5 884300 1 SLI-23 60hz Motor Sheave only 31 881367 1 Gas Shut-off Assembly
884303 1 SLI-34 60hz Motor Sheave only 32 142820 1 ½ x ½ x ½ Black Iron Tee
884301 1 SLI-23 50hz Motor Sheave 33 142703 1 ½ x 4" Black Iron Pipe
884302 1 SLI-34 50hz Motor Sheave 34 142500 1 ½ - 90 Degree Elbow
170733 1 Loctite (not illustrated) 35 142953 2 3/8 x ½ Steel Bushing
6 100281 1 Idler Wheel 36 128944 2 25M Gas Valve 120vac 60Hz
7 150634 1 3/8 x 2 ¾ Hex Cap Screw 128907 1 25M Gas Valve 120vac 50Hz
8 851510 1 Idler Arm 37 350220 1 Dual Gas Valve Bracket
9 150501 7 5/16-18 x ¾ Hex Head Bolt 38 183144 2 In-shot Tube
10 153002 9 Split Lock Washer 39 185063 2 Igniter Bracket
11 153001 7 Flat Washer 40 183145 2 Hot Surface Ignitor Mounting Screw
12 152014 5 Free Spin Wash nut 41 350219 2 SLI-23 Round Gas Burner Funnel
13 153018 2 ¼ Flat Washer 350223 2 SLI-34 Round Gas Burner Funnel
14 153002 9 5/16 Split Lock Washer
15 152004 2 5/16-18 Hex Nut Electric Ovens

1 851395 1 SLI-23 Electric Oven Assy, 200-415v

Oven Assemblies 851396 1 SLI-34 Electric Oven Assy, 200-415v
2 119996 1 SLI-23 16Kw Element
Gas 119997 1 SLI-34 22Kw Element
Ovens 851386 1 SLI-23 60hz Natural Gas 3 350230 1 Electric Oven Housing
Dual Burner Assy 4 152014 2 Free Spin Washnut
851389 1 SLI-23 50hz Natural Gas 5 131322 1 208/240v 30A Contactor 50/60 Hz
Dual Burner Assy 121223 1 120v 40A Contactor 50/60 Hz
851390 1 SLI-34 60hz Natural Gas 131324 1 208/240v 30A Contactor 50/60 Hz
Dual Burner Assy 131325 1 120v 50A Contactor 50/60Hz
851391 1 SLI-34 60hz Natural Gas 131329 1 120v 75A Contactor 50/60Hz
Dual Burner Assy 131330 1 208/240v 75A Contactor 50/60Hz
16* 140877 2 SLI-23 #29 Orifice 6 132029 1 Auto Transformer
* 140880 2 SLI-34 #22 Orifice
LP* 884248 1 SLI-23 LP Conversion Kit
LP* 884249 1 SLI-34 LP Conversion Kit Steam Coil

17 183137 2 3/8 Close Nipple Black Iron 1 165067 1 Copper Steam Coil
18 154355 1 U-Bolt with Bolts for ½ Black Pipe 2 813416 1 Steam Solenoid Phase 8 Assy, 220-240v
19 143344 1 SLI-23 ½ x 26" Black Pipe - Only 813451 1 Steam Solenoid Phase 8 Assy, 120v
142636 1 SLI-34 ½ x 36" Black Pipe - Only

* Note: Consult factory for elevation over 2,000ft for

correct burner orifice size

450287-2 [email protected] 7
 Parts Diagram
Detail 3

Detail 4

8 Girbau, SA 450287-2
Parts List

Detail # 3 Detail # 4

Illus. Illus.
No. P/N Qty. Description No. P/N Qty. Description

Lint & Blower Assembly Rear Tumbler Support Panel Assembly

1 819299 1Large Lint Box Assy 1 851263 1

Rear Tumbler Support Assy
(includes illus. 3 through 5 only) 851401 1
Steam Rear Tumbler Support Assy
2 819295 1 Large CRS Lint Draw Assy with steam coil
3 818369 1 Exhaust Temperature Probe Assy 2 851372 2 3 ½ inch Rear Wheel Assy
4 130119 1 190 degree Exhaust Hi-Limit Sensor 180051 1 3 ½ inch Wheel Only
5 122002 1 Lint Door Switch 3 121010 2 Terminal Lug
6 851242 1 115v Impellor & Capacitor Assy 4 851258 1 Axial Probe Assy
100645 1 115v Impellor only 5 818692 1 Switch Assy Complete
813406 Ref Phase 8 Blower Motor Harness 122200 2 Sail Switch Only
115v only 6 183112 1 205 Degree Hi-Limit Sensor
(request when ordering impellor) 7 851262 1 Heat Duct
6 851243 1 230v Impellor & Capacitor Assy 8 152014 13 ¼ - 20 Free Spin Nut
100646 1 230v Impellor only 9 350237 1 Rear Electric Box
813406 Ref Phase 8 Blower Motor Harness 230v only 350238 1 Rear Electric Box Cover
(request when ordering impellor) 10 350228 1 Thrust Bearing Box
150687 4 Impellor mounting screws 11 318691 1 Cover Plate for “No Safe Coin Dryers”
(not illustrated) 12 851514 1 Safe Deltrol Valve Assy “OPL Dryers Only”
153007 4 Lock washers, for impellor mounting screws
(not illustrated)
7 100618 1 Capacitor for 115v blower impellor
100670 1 Capacitor for 230v blower impellor
8 851292 1 SLI-23 Blower Housing Final Assy
851365 1 SLI-34 Blower Housing Final Assy

450287-2 [email protected] 9
Girbau P/N 450287 2 -04/06/06-0