Previewpdf

Nano and Energy Series
FUNDAMENTALS AND SOURCE

CHARACTERISTICS OF
RENEWABLE ENERGY SYSTEMS
Radian Belu
Fundamentals and Source
Characteristics of Renewable
Energy Systems
Nano and Energy Series
SERIES EDITOR
Sohail Anwar, Pennsylvania State University, Altoona College, USA
Nanotechnology: Business Applications and Commercialization

Sherron Sparks
Nanotechnology: Ethical and Social Implications

Ahmed S. Khan
A History of the Workplace: Environment and Health at Stake

Lars Bluma, Judith Rainhorn
Alternative Energy Technologies: An Introduction with Computer Simulations

Gavin Buxton
Computational Nanotechnology: Modeling and Applications with MATLAB®

Sarhan M. Musa
Advanced Nanoelectronics
Razali Ismail, Mohammad Taghi Ahmadi, Sohail Anwar
For more information about this series, please visit:

https://www.crcpress.com/Nano-and-Energy/book-series/NANANDENE
Fundamentals and Source
Characteristics of Renewable
Energy Systems
Radian Belu
CRC Press
Taylor & Francis Group
6000 Broken Sound Parkway NW, Suite 300
Boca Raton, FL 33487-2742
© 2020 by Taylor & Francis Group, LLC

CRC Press is an imprint of Taylor & Francis Group, an Informa business
No claim to original U.S. Government works
Printed on acid-free paper
International Standard Book Number-13: 978-0-367-26139-9 (Hardback)
This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made
to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all
materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all
material reproduced in this publication and apologize to copyright holders if permission to publish in this form has not been
obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any future
reprint.
Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in
any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, micro-
filming, and recording, or in any information storage or retrieval system, without written permission from the publishers.
For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://www.copyright.
com/) or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a
not-for-profit organization that provides licenses and registration for a variety of users. For organizations that have been granted a
photocopy license by the CCC, a separate system of payment has been arranged.
Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for
identification and explanation without intent to infringe.
Library of Congress Cataloging-in-Publication Data
Names: Belu, Radian, author.

Title: Fundamentals and source characteristics of renewable energy systems
/ Radian Belu.
Description: Boca Raton : Taylor & Francis, a CRC title, part of the Taylor
& Francis imprint, a member of the Taylor & Francis Group, the academic
division of T&F Informa, plc, 2020. | Series: Nano and energy series |
Includes bibliographical references and index.
Identifiers: LCCN 2019021396 | ISBN 9780367261399 (hardback : acid-free
paper) | ISBN 9780429297281 (ebook)
Subjects: LCSH: Electric power systems. | Renewable energy sources.
Classification: LCC TK1001 .B428 2020 | DDC 333.79/4--dc23
LC record available at https://lccn.loc.gov/2019021396
Visit the Taylor & Francis Web site at

http://www.taylorandfrancis.com
and the CRC Press Web site at

http://www.crcpress.com
eResource material is available for this title at

https://www.crcpress.com/9780367261399
Contents
Preface ..............................................................................................................................................ix
Acknowledgments ...................................................................................................................... xiii
Author .............................................................................................................................................xv
1. Energy, Environment, and Renewable Energy .................................................................1

1.1 Introduction, Basic Energy Concepts, Fossil Fuels Sources ...................................... 1
1.2 Renewable Energy Sources ............................................................................................5
1.3 Physics and Energy Fundamentals ..............................................................................7
1.4 Heat Transfer and Essential of Fluid Mechanics ...................................................... 17
1.4.1 Basics of Fluid Mechanics ................................................................................ 19
1.5 Future Energy Demand and Environment ............................................................... 20
1.6 Units and Dimensional Analysis ................................................................................22
1.7 Summary ........................................................................................................................ 25
Questions and Problems ....................................................................................................... 25
References and Further Readings ........................................................................................ 28
2. Solar Energy Resources ....................................................................................................... 29

2.1 Introduction, Astronomical Background .................................................................. 29
2.2 Sun–Earth Geometry, Extraterrestrial Solar Radiation, Solar Constant ............... 32
2.3 Solar Irradiance on the Earth’s Surface ......................................................................44
2.4 Solar Radiation on Horizontal and Tilted Surfaces ................................................. 51
2.4.1 Clear Sky Radiation Models ............................................................................54
2.4.2 Solar Radiation on Tilted Surfaces ................................................................. 55
2.5 Daily and Monthly Solar Radiation Estimation Models ......................................... 58
2.6 Solar Radiation Measurements ................................................................................... 59
2.6.1 Solar Design Tools............................................................................................. 59
2.6.2 Radiation Measurement Techniques .............................................................. 60
2.7 Summary ........................................................................................................................ 62
Questions and Problems ....................................................................................................... 62
References and Further Readings ........................................................................................64
3. Solar Collectors and Solar Thermal Energy Systems ................................................... 67

3.1 Introduction to Solar Thermal Energy....................................................................... 67
3.2 Passive and Active Solar Thermal Energy Systems ................................................. 70
3.2.1 Direct Use of Passive Solar Energy Systems ................................................. 71
3.2.2 Active Solar Heating and Cooling .................................................................. 75
3.3 Collecting Solar Energy, Tracking Sunlight .............................................................. 76
3.3.1 Thermal Solar Collector Capture, Heat Transfer, and Loss
Mechanisms .................................................................................................. 83
3.3.2 Radiative Properties and Characteristics of Materials ................................83
3.3.3 Heat Transfer and Loss Mechanisms in Solar Collectors ........................... 86
v
vi Contents
3.4 Solar Collectors, Types, and Characteristics ............................................................. 92

3.4.1 Flat-Plate Solar Collectors ................................................................................ 95
3.4.2 Tubular Solar Energy and Evacuated-Tube Collectors .............................. 103
3.4.3 Solar Collector Components .......................................................................... 106
3.5 Concentrating Solar Energy ...................................................................................... 110
3.5.1 Shadowing and Shadow Types ..................................................................... 117
3.5.2 Optimum Solar Collector, Panel Orientation, and Solar Collection
Estimates .......................................................................................................... 122
3.6 Solar Thermal Systems for Electricity Generation ................................................. 124
3.6.1 Systems with Parabolic Troughs or Linear Fresnel Collectors ................. 127
3.6.2 Salt Solar Pond, Solar Chimney Systems, and Solar Furnaces ................. 131
3.7 Solar Thermal Energy Storage .................................................................................. 135
3.8 Summary ...................................................................................................................... 138
3.9 Questions and Problems ............................................................................................ 140
References and Further Readings ...................................................................................... 143
4. Photovoltaic Systems and Applications ......................................................................... 145

4.1 Introduction ................................................................................................................. 145
4.2 Photovoltaic Basics, Operation, and PV Cell Materials ......................................... 146
4.2.1 Double-Diode and Simplified Single-Diode PV Cell Models ................... 154
4.2.2 Non-Ideal PV Cell Characteristics and Behavior ....................................... 157
4.2.3 PV Cell Construction, Technology, and Materials ..................................... 163
4.3 Photovoltaic Modules, Arrays, and Systems ........................................................... 168
4.3.1 PV Module Efficiency and Characteristics .................................................. 173
4.3.2 PV Module Technology and Types............................................................... 174
4.3.3 PV System Operation ...................................................................................... 175
4.4 PV Systems and Components.................................................................................... 179
4.4.1 PV Array Orientation ..................................................................................... 184
4.4.2 Factors Affecting PV Output ......................................................................... 184
4.5 PV System Design ....................................................................................................... 188
4.5.1 Site Selection and Load Estimates ................................................................ 189
4.6 Summary ...................................................................................................................... 191
4.7 Questions and Problems ............................................................................................ 192
5. Wind Energy Resources .................................................................................................... 197

5.1 Introduction, Historical Notes .................................................................................. 197
5.2 Wind Energy Resources ............................................................................................. 200
5.3 Factors Affecting Wind Energy Estimates and Computations ............................ 204
5.3.1 Air Density, Temperature, Turbulence, and Atmospheric Stability
Effects................................................................................................................ 204
5.3.2 Wind Shear, Wind Profile, Wind Gust, and Other Meteorological
Effects................................................................................................................ 207
5.4 Instrumentation and Measurement Techniques, Data Validation....................... 211
5.4.1 Ecological Indicators for Wind Energy ........................................................ 212
5.4.2 Wind Measurement Techniques ................................................................... 213
5.4.3 Data Validation and Editing .......................................................................... 218
Contents vii
5.5 Wind Resource Statistics ............................................................................................ 219

5.5.1 Wind Statistics and Probability Distribution Functions ........................... 221
5.5.2 Weibull Probability Distribution .................................................................. 224
5.5.3 Other Probability Distribution Function Used in Wind Energy ............. 232
5.5.3.1 Gamma Probability Distribution ................................................... 235
5.5.3.2 Lognormal Probability Distribution ............................................. 235
5.5.3.3 Truncated Normal Probability Distribution ................................ 236
5.5.4 Wind Direction Analysis and Statistics ....................................................... 237
5.6 Wind Energy Potential Assessment ......................................................................... 241
5.6.1 Long-Term Assessment and MCP (Measure-Correlate-Predict)
Methods ............................................................................................................ 245
5.6.2 Wind Atlas in Context of Wind Energy ....................................................... 246
5.7 Summary ...................................................................................................................... 247
Questions and Problems ..................................................................................................... 248
6. Wind Energy Conversion Systems .................................................................................. 253

6.1 Introduction, Wind Turbine Configurations ........................................................... 253
6.1.1 Wind Turbine Configurations and Classifications ..................................... 255
6.1.2 Wind Turbine Terminology ........................................................................... 259
6.2 Wind Turbine Aerodynamics .................................................................................... 262
6.2.1 Power of the Wind .......................................................................................... 262
6.2.2 Actuator Disk Theory ..................................................................................... 266
6.2.3 Vertical Axis Wind Turbines ......................................................................... 271
6.2.4 Blade Element Model ...................................................................................... 274
6.2.5 Factors Affecting Power Curve ..................................................................... 276
6.2.6 Operating Regions, Energy Production, and Capacity Factor ................. 278
6.3 Wind Turbine Components ....................................................................................... 281
6.4 Operation and Control of Wind Energy Conversion Systems ............................. 285
6.4.1 Control Methods ............................................................................................. 285
6.4.2 Electrical Aspects of Wind Energy Conversion Systems .......................... 289
6.5 Setting and Design of Wind Power Plants .............................................................. 293
6.5.1 Wind Farms ..................................................................................................... 294
6.6 Economic and Environmental Aspects of Wind Energy Projects ....................... 296
6.7 Summary ...................................................................................................................... 298
7. Geothermal Energy ............................................................................................................ 303

7.1 Introduction, Earth Internal Structure .................................................................... 303
7.1.1 Geothermal Energy Origins .......................................................................... 307
7.2 Geothermal Energy Resources Characterization and Assessment ..................... 311
7.2.1 Definition of a Geothermal Resource (Heat, Permeability, Water) .......... 311
7.2.2 Reservoir Characteristics ............................................................................... 314
7.2.3 Improving a Geothermal Resource through Human Intervention ......... 318
7.2.4 Resource Assessment and Analysis ............................................................. 319
viii Contents
7.3 Direct Use of Geothermal Energy ............................................................................ 322

7.3.1 Assessing Feasibility of Direct Use Applications ....................................... 328
7.3.2 District Heating ............................................................................................... 329
7.3.3 Geothermal Heat Pumps ............................................................................... 331
7.4 Electricity from Geothermal Energy Sources ......................................................... 335
7.5 Summary ...................................................................................................................... 339
Questions and Problems .....................................................................................................340
References and Further Readings ......................................................................................342
8. Hydropower and Marine Energy ....................................................................................345

8.1 Introduction, Water Energy, Basics...........................................................................345
8.1.1 Hydropower Basics ......................................................................................... 347
8.1.2 Ocean Energy Assessment and Forecasting ...............................................354
8.2 Small and Mini Hydropower .................................................................................... 355
8.2.1 Small Hydroelectric Power Technology ...................................................... 362
8.2.1.1 Impulse Turbines ............................................................................. 363
8.2.1.2 Reaction Turbines ............................................................................. 365
8.2.1.3 Pump as Hydroelectric Turbine ..................................................... 366
8.2.2 Generators and Control .................................................................................. 366
8.3 Tidal and Wave Energy .............................................................................................. 369
8.3.1 Tidal Energy..................................................................................................... 369
8.3.2 Tidal Barrage Methods ................................................................................... 371
8.3.3 Marine Current Power Systems .................................................................... 374
8.3.4 Wave Energy .................................................................................................... 377
8.4 Ocean Thermal Energy Conversion ......................................................................... 380
8.5 Summary ...................................................................................................................... 385
Appendix A ................................................................................................................................. 389

Appendix B.................................................................................................................................. 393
Index ............................................................................................................................................. 397
Preface
In the last three decades our society and every country are facing energy challenges, such
as energy conservation, use of increased energy efficient equipment, devices or systems,
security of the energy supply, energy portfolio diversification, sustainability, or pollu-
tion reduction and control. Public electricity supply was originally developed in the form
of local generation feeding local loads, the individual systems being built and operated
by independent companies. This led to large centrally located generation stations sup-
plying the loads via transmission and distribution systems. This trend may well have
continued but for the need to minimize the energy generation and use environmental
impacts, particularly pollutant emissions and concerns over the energy supply security of
often imported fossil fuels. Consequently, governments, researchers, and energy planners
are now actively developing alternative and cleaner forms of energy production, these
being dominated by renewables (e.g., wind, solar, water bioenergy), distributed genera-
tion, local combined heat and power generation, and the use of waste products for energy
production. Renewable energy sources with few exceptions, e.g., geothermal, tide energy
originate from the Sun, are the oldest and the most modern energy forms and technologies
used by humans. Conventional energy supplies are predicted to be exhausted sometimes
in some future, and as energy demands keep increasing, it is expected that balancing the
supply and demand becomes increasingly challenging. Renewable energy sources, present
in large quantities in most of the part of the world, in contrast to the highly localized fossil
fuels or mineral resources, are part of the today national energy policies with significant
goals for increases into the generation energy portfolio. Consequently, it is expected that
non-conventional energy sources and renewable energy resources will play a greater role
in addressing the imbalance between energy supplies and demands. However, harness-
ing the renewable energy as important alternative energy sources is sometimes expensive
and difficult to apply fully in particular sectors of society because of the location, variabil-
ity intensity, and nature of the applications; therefore, specific matching of the renewable
energy source to the application is a very important aspect of maximizing the utilization
of renewable energy. In this regards, good resource characterization, assessment, analysis,
the technology selections are critical factors in the renewable energy projects and devel-
opments. Many universities are now offering courses on renewable energy, distributed
generation, and how sustainable, low pollutant emission technologies can be integrated
effectively into the energy mix and power distribution systems. There is a great demand
from employers for graduates who have studied such courses but, in almost all countries,
a critical shortage of students with a strong education in energy and power engineer-
ing. The major aims of this book are to put the readers in contact with modern industry
experiences, technologies, current and future trends of the use, exploitation, operation,
and maintenance of renewable energy systems. Today there are constant increases of the
production plants of renewable energy, guided by important social, economic, environ-
mental, and technical considerations and aspects. The substitution of conventional energy
production methods is a challenge in the current global and socio-economic context. New
strategies of exploitation, energy uses of energy or maintenance procedures are emerging
naturally as actions for solving the integration of these new aspects in the current systems
of energy production.
ix
x Preface
This book’s goals and objectives are to provide the students, instructors, as well as engi-
neers, researchers, technicians, and others with technical interests in renewable energy
systems with comprehensive knowledge of the renewable energy technologies. The book’s
first volume gives the essential knowledge of the major renewable energy sources and
technologies, fundamental principles, source characteristics, assessment and analysis,
and how they work, and are evaluated in order to properly select the optimum system
or equipment for specific applications. Hydropower is well-established technology, while
marine energy is still in the development phase, with almost no extended commercial
applications. Overall Book Two covers major renewable energy sources, conversion sys-
tems, energy storage systems and technologies, grid integration, economic aspects, and
environmental implications of the renewable energy systems, from basic and fundamental
knowledge to resource assessment and design aspects. The first volume contains compre-
hensive descriptions of the major renewable energy sources, conversion systems, operation
and control, while the second volume focuses on the major energy storage technologies,
bioenergy, hydrogen economy, an introduction of the microgrids, distributed generation,
environmental impacts of renewable energy sources, economics, and energy management.
The first volume also gives comprehensive descriptions, theory, and assessment and anal-
ysis methods of solar and wind energy resources, photovoltaic systems, wind turbines,
solar thermal systems, geothermal energy, and hydropower systems. Generation electric-
ity from the Sun or wind can be achieved through photovoltaic systems, solar thermal
energy systems and wind turbines, respectively. However, regardless the solar or wind
conversion technology, good knowledge and an accurate assessment of the solar or wind
energy resources are critical for any project or development. Chapter 1 of this volume
introduces the basic energy concepts, physics background, energy concepts, a brief discus-
sion of the energy trends and environmental impacts, fundamental and energy units and
the system of units. Chapter 2 discusses the solar radiation concepts, solar equations, rela-
tionships, solar energy assessment, modeling and measurement methods, while Chapter 3
gives a good presentation of the solar thermal energy, operation, characteristics and main
types of solar collectors, direct solar energy applications and solar thermal electricity gen-
eration. Chapter 4 is reserved to the photovoltaic systems, physics of the photovoltaic cells,
basic cell models, theory and performances, cell efficiencies, types, materials, photovol-
taic system control, operation, and applications. Chapters 5 and 6 focus on wind energy,
wind velocity statistics, wind energy measurement techniques and assessment methods,
wind turbine types, characteristics, turbine aerodynamics, as well as wind turbine com-
ponents, control and operation, electric aspects of wind energy conversion systems, wind
energy project and wind farm setting, design and development. Chapter 7 introduces the
geothermal energy sources, Earth internal structure source origin, characterization and
types, direct geothermal energy uses, and brief presentation of the geothermal electric-
ity generation. The last volume chapter, Chapter 8 focuses on the hydropower systems,
characterization and theory, with a larger presentation of the small hydro-electric sys-
tems, types of the turbine used in such systems, control, and generators. Two sections of
Chapter 8 discuss the wave and tide energy system, theory, characteristics, and issues,
followed by a brief presentation of the ocean thermal energy systems. This book origi-
nates from courses that the author taught in the areas of energy and power engineering,
renewable energy systems, distributed generation, industrial energy systems, and energy
management, as well as from the research projects that the author was involved in the last
20 years. Students or readers using this book must have only fundamental knowledge of
mathematics, physics, and chemistry as usually expected for students enrolled in pro-
grams of engineering or sciences. Likewise, this book assumes no specific knowledge of
Preface xi
power and energy engineering; it guides the reader through basic understanding from
topic to topic and inside of each topic. Over 300 questions and problems are included in
this volume. Each chapter also contains several solved examples to help the readers and
instructors to understand and/or to teach the materials. A rich, comprehensive, and up-
to-date literature is also included at the end of each chapter for professionals, engineers,
students, and interested readers in the renewable energy topics and problems. The book is
intended both as a textbook and as reference book for students, instructors, engineers, and
professionals interested in renewable energy systems, technologies, operation, use, and
design. The author is fully indebted to the students, colleagues, and co-professionals for
their feedback and suggestions over the years, and last but not least to the editorial techni-
cal staff for support and help.
Acknowledgments
To my wife Paulina Belu, my best friend and partner in life, for her patience, understanding,
and support. The book is also dedicated to my children, Alexandru, Ruxandra, Mirela and
my grandchildren Stefan-Ovdiu and Ana-Victoria for their support and life enjoinment.
xiii
Author
Radian Belu, PhD, is an associate professor in the Electrical Engineering Department at

Southern University and A&M College, Baton Rouge, Louisiana. He has a PhD in power
engineering and a PhD in physics. Before joining Southern University, Dr. Belu held
faculty and research positions at universities and research institutes in Romania, Canada,
and United States. He also worked for several years in industry as project manager, senior
engineer, and consultant. His research focuses on energy conversion, renewable energy,
microgrids, power electronics, climate, and extreme event impacts on power systems.
He taught and developed courses in power engineering, renewable energy, smart grids,
control, electric machines and environmental physics. His research interests include power
systems, renewable energy systems, smart microgrids, power electronics and electric
machines, energy management and engineering education. Dr. Belu has published 1 book,
15 book chapters, and over 200 papers in referred journals and in conference proceedings.
He has been PI or Co-PI for various research projects in the United States and abroad.
xv
1
Energy, Environment, and Renewable Energy
1.1 Introduction, Basic Energy Concepts, Fossil Fuels Sources

Energy conversion, such as that which is concerned mainly with converting direct or
indirect forms of solar radiant energy to electrical, mechanical, or chemical energy, is the
main topic of this chapter, as well as the book. Energy cannot be created or destroyed,
but is only transformed from one form to another. The sole exception is nuclear, which
is derived from a reduction in mass of the fuel but this, however, is mostly handled
by physicists. Thus, strictly speaking, energy engineering is simply the engineering
of transformation of energy between its different forms. One can distinguish between
primary forms of energy that are found naturally, and secondary forms into which they
can be transformed to enable easier transportation, usage, and storage. It is possible to
necessitate more than one transformation to get it into a final useful form. There also
energy forms that need less processing since they are closer to the form in which they
will be finally used, which is the final state in which it can be used for some purpose. An
example of a primary form is petroleum, which is found in nature, and a secondary form
is electricity, which is not found in nature but which can be obtained from it. The useful
form may be work that is needed to perform a certain mechanical task. Energy is an
essential component of our daily lives and a vital source of economic development
and national welfare. Humans discovered and learned how to make fire to cook meat,
to deter predators, and to make tools and deadly weapons from metals, shifting the
energy balance nature into irreversible one. During Industrial Revolution methods
were discovered to convert heat into electricity, the most versatile and convenient
form of energy. Electricity enabled astonishing scientific and technological advances,
transforming our civilization and way of life. However, it comes with an unprecedented
fossil fuel use and adverse environmental impacts, making us also dependent on a
complex energy infrastructure for transportation, communication, heating, lighting,
industrial processes and distribution of goods. Energy conversion is a multidisciplinary
and disparate subject of applied sciences, requiring an understanding of physical and
engineering principles. Energy issues also tend to be open and controversial issues, need
to be address with an open an independent mind, being a rewarding and intellectually
stimulating exercise. Throughout our history, the energy harnessing in its various forms
presented great challenges and stimulated scientific and technological discoveries, while
our energy usage has increased at an accelerate pace.
1
2 Fundamentals and Source Characteristics of Renewable Energy Systems
Modern energy technologies are the results of centuries of advances in science, technol-
ogy, and gradual design improvements. To meet the global needs of economic growth
there is a dramatic increase in the energy demand. Unlike the developed countries the
developing countries are struggling to meet the increasing energy demands and chal-
lenges. Increased energy needs put considerable stresses on the Earth’s resources and have
had increasingly adverse environmental impacts. We are at acrossroads; our energy use
must be critically analyzed to determine more sustainable, environmentally friendly, and
efficient approaches for generation, distribution, and use of this vital component of our
lives. The twenty-first-century economies face a two-fold energy challenge: meeting
the needs of billions of people who still lack access to energy services while participat-
ing in a global transition to clean and low-carbon energy systems. Both demand urgent
attention. The access to reliable, affordable, and socially acceptable energy services is
a pre-requisite for alleviating extreme poverty and meeting societal development goals.
The second one because of emissions from developing countries are growing rapidly and
are contributing to environmental problems, putting the health and prosperity of people
at risk. Historically, the energy use is marked by four trends: (1) rising consumption and
transition from traditional energy sources to commercial energy forms (e.g., electricity
or fossil fuels), (2) steady improvement in the power and efficiency of energy technolo-
gies, (3) a fuel diversification and de-carbonization trend for electricity production; and
(4) improved pollution control and lower emissions. These trends have largely been posi-
tive. However, the technology improvement rate has not been sufficient to keep pace with
the rapid demand growth negative consequences. The challenge is not so much to change
course as it is to accelerate progress, toward increased energy efficiency and lower-carbon
energy sources. This would have many concurrent benefits for developing countries in
terms improving public health, making feasible a broader access to basic energy services
and future economic growth. Moreover, to the extent that sustainable energy policies pro-
mote the development of indigenous renewable-energy industries, having additional ben-
efits of creating new economic opportunities, reducing exposure to volatility of energy
markets, and conserving resources for internal investments, by reducing overall energy
costs. In this context, renewable energy is becoming more relevant part of the energy solu-
tions, included in national policies, with goals to be a significant part of generated energy
in the near future.
As a comprehensive overview of renewable energy systems, we are exploring the use
of the Sun, wind, biomass, geothermal resources, and water to generate more sustain-
able energy. Taking a multidisciplinary approach, this book explains the renewable energy
fundamentals. Starting with solar power, wind, small hydro power, other renewable
energy sources, energy storage devices, grid integration issues, environmental and eco-
nomic issues are also discussed. We have to keep in mind that there is a strong correlation
between standard of living, as measured by the gross domestic product (GDP) per capita
and the energy consumption per capita (see Table 1.1). It is natural that less developed coun-
tries will seek to increase GDP and thereby increase their energy consumption per capita.
While in the developed countries the population size is almost constant, in the developing
counterpart there are net increases in the population size. The net effect is a significant
increase in global energy demand. The forecasts are that are no significant changes in the
fossil fuel-based energy generation, over the next five years, either it is expected increase
in the renewable energy sources. Oil will still be used mainly for transportation. Oil, coal,
and natural gas are representing about 86% of all primary energy production.
Most of the fossil fuels (coal, oil, and natural gas) were formed from the ancient life
stock remains over the course of millions of years. Some energy sources are either stores
Energy, Environment, and Renewable Energy 3
TABLE 1.1
Correlation between Human Welfare Indicator and Energy Consumption
Commercial Share of Total Energy
Indicator of Human Welfare 0%–20% 21%–40% 41%–100%
Life expectations (Years) 59.8 69.0 69.5
Probability not surviving to 40 21.7 9.4 9.1
School enrollment (%) 52.4 65.4 76.9
Children underweight (%) 40.9 15.1 11.9
No access to clean Water (%) 22.8 20.9 12.8
(repositories) of energy, usually chemical and nuclear that can be liberated for use. Other
energy sources are in the form of energy flows through the natural environment, pre-
sented in varying degrees at a particular place and/or time. Examples of the first type
are coal, oil, uranium, or natural gas, while wind and solar energy are of the second
type. Electricity created in an energy conversion system requires energy input greater
than the electricity itself, since some energy always is lost to the environment. Notice
that electricity is not an energy source, but a product of whatever energy source was
used. Fossil fuels are highly concentrated stores of energy (higher energy density), com-
pared with most of the renewable energy sources, being easily and cheaply to collect,
store, ship, and use where and when is desired or needed. The term energy carrier, thus a
carrier of the above defined energy is a substitute that could be used to produce useful
energy, either directly or by conversion processes. According to the degree of conversion,
energy carriers are classified as primary or secondary energy carriers and as final energy
carriers. The respective energy content of these energy carriers consists of primary energy,
secondary energy, and final energy defined as follows:
Primary energy carriers are substances which have not yet undergone any technical
conversion, whereby term primary refers to the energy content of the energy car-
riers and the primary energy flows. From primary energy (e.g., wind energy, solar
radiation) or primary energy carriers (e.g., coal, crude oil, or biomass), secondary
energy or secondary energy carriers can be either produced directly or by conver-
sion energy steps.
Secondary energy carriers are energy carriers, produced from primary or other
energy carriers directly or by one or several technical conversion processes
(e.g., gasoline, heating oil, electrical energy), whereby the term secondary
energy refers to the energy content of the carrier and the corresponding energy
flow. This processing of primary energy is subject to conversion and distribu-
tion losses. Secondary energy carriers and secondary energies are available to
be converted into other secondary or final energy carriers or energies by the
consumers.
Final energy carriers and final energy respectively are energy streams directly consumed
by the final user (e.g., light, fuel oil, wood chips or district heating at the building
substation). They result from secondary and possibly from primary energy car-
riers, or energies, minus conversion and distribution losses, self-consumption of
the conversion system, and non-energetic consumption. They are available for the
conversion in useful energy.
Useful energy refers to the energy available to the consumer after the last conversion
step to satisfy the respective requirements or energy demands (e.g., space heating,
food preparation, information processing and distribution, transportation). It is
produced from final energy carriers or final energies, reduced by losses of this last
conversion (e.g., losses due to dissipation by a light bulb to generate light, losses of
wood chip fired stove to provide heat). The entire energy quantity available to humans,
to be used is referred to as energy basis. It is composed by the energy of the predomi-
nantly exhaustible resources and the largely renewable energy sources. In terms
of energy resources, generally fossil and recent are distinguished, as: Fossil energy
resources are energy stocks that have formed during ancient geologic ages by bio-
logic and/or geologic processes, subdivided into fossil biogenous energy resources
(i.e., stocks of energy carrier of biological origin) and fossil mineral (i.e., stocks of
energy carrier of mineral or non-biological origin). The former includes hard coal,
natural gas, and crude oil deposits, whereas the latter comprises, for instance, the
energy contents of uranium deposits and resources to be used for nuclear fusion
processes. Recent resources are energy resources that are currently generated, for
instance, by biological, geophysical, and atmospheric processes, including, among
others, the biomass energy content and the potential energy of a natural reservoir.
Energy sources, by contrast, provide energy systems over a long period of time; they are
thus regarded as almost inexhaustible in terms of human times. But these energy flows
are released by natural and technically uncontrollable processes from exhaustible fossil
energy resources (like fusion processes within the Sun). The available energies or energy
carriers can be further subdivided into fossil biogenous, fossil mineral and renewable
energies or fossil biogenous, fossil mineral and renewable energy carriers.
• Fossil biogenous energy carriers primarily include the energy carriers, such as
coal (lignite and hard coal) as well as liquid or gaseous hydrocarbons (such as
crude oil and natural gas). A further differentiation can be made between fossil
biogenous primary energy carriers (e.g., lignite) and fossil biogenous secondary
energy carriers (e.g., gasoline, diesel fuel).
• Fossil minerals energy carriers comprise all substances that provide energy derived
from atomic fission or nuclear fusion (such as uranium, thorium, or hydrogen).
• The term renewable energy refers to primary energies that are regarded as inex-
haustible in terms of human (time) dimensions. They are continuously generated
by the energy sources, such as solar energy, tidal energy, or geothermal energy.
The energy produced within the Sun is responsible for a multitude of other renew-
able energies (such as wind and hydropower) as well as renewable energy carriers
(such as solid or liquid bio-fuels).
• The energy content of the waste can only be referred to as renewable if it is of
non-fossil origin (e.g., organic domestic waste, waste from the food processing
industry). Properly speaking, only naturally available primary energies or pri-
mary energy carriers are renewable but not the resulting secondary or final ener-
gies or the related energies carriers. For instance, the electric energy generated
from renewable energy sources by means of technical conversion processes itself
is not renewable, since it is only available as long as the respective technical con-
version systems are operated.
1.2 Renewable Energy Sources

Renewable energy is generally defined as energy coming from naturally replenished
energy resources on a human timescale, such as sunlight, wind, rain, tides, waves, and
geothermal heat. Renewable energy can replace conventional fossil fuels in three areas:
electricity generation (including off-grid energy service), heating and cooling, and engine
fuels. In all forms, renewable energies derive directly from the Sun, or from heat generated
deep within the Earth. Included in this definition is electricity and heat generated from
solar, wind, ocean, hydropower, biomass, geothermal resources, biofuels and hydrogen
derived from renewable resources. Vast majority of renewable energy sources derive from
solar radiation. Direct solar energy refers to solar thermal energy conversion and photo-
voltaics, while indirect solar energy includes wind and wave powers, hydropower, and
biofuels. Other types of renewable energy are the tides (mainly due to moon attraction)
and geothermal power. The magnitude of renewable energy sources is huge and may eas-
ily supply all our present and future energy needs. Non-solar renewable energies are those
that do not depend direct on solar radiation. One type of renewable energy, not derived
from natural resources, is the conversion the wastes into energy, often by producing meth-
ane that can be used to generate electricity or to fuel engines. It is very important to high-
light the difference between primary energy sources and energy storage medium. Major
advantages of the renewable energy include: sustainable, virtually inexhaustible and non-
polluting fuel is free, ideal for off-grid and distributed generation, while the main draw-
backs are: variability and intermittence, lower energy density, generation sites often located
far from populated areas, large initial investment, high maintenancecosts and sometimes
adverse environmental impacts. It is out of question that in the future, large proportions
of energy are from renewable energy sources. Renewable energy can be regarded as one
of the fundamental premises for building a sustainable global society. A truly sustainable
energy source is not only renewable, but also sustainable, meaning that energy production
and use is endured by the biosphere, the biodiversity, and the social stability of the human
culture.
Renewable energy resources exist over wide geographical areas, in contrast to conven-
tional energy resources, concentrated often in a very limited number of countries. Rapid
deployment of renewable energy and energy efficiency are resulting in significant energy
security, climate change mitigation and economic benefits. There is also strong public
support for promoting renewable energy. At the national level, many nations around the
world already have renewable energy contributing significantly to their energy supply
mixture. Renewable energy markets are projected to continue to grow strongly in the
coming decades and beyond. For example, solar energy, the most important renewable
energy source, is plentiful, having the highest availability compared to other energy
sources. The amount of solar energy supplied to the Earth in one day is sufficient to
supply the world total energy needs for an entire year. Solar energy is clean and almost
free of emissions, it does not produce pollutants or harmful by-products. Solar energy
conversion into electrical energy has many application fields. Residential, vehicular,
space, aircraft and naval applications are the main solar energy applications. Sunlight
has been used as an energy source by ancient civilizations to ignite fires and burn enemy
warships using “burning mirrors.” Until the eighteenth century, solar power was used
for heating and lighting purposes. During the 1800s, Europeans started to build solar-
heated greenhouses and conservatories.
The main renewable energy sources give rise to a multitude of very different energy
flows and carriers due to various energy conversion processes occurring in nature. In this
respect, wind energy, hydropower, ocean current energy, bio-fuels all represent con-
version of the solar energy. The energy flows available on Earth resulting from renew-
able energy sources vary tremendously, in terms of energy density or with regard to
spatio-temporal variations. Major renewable energy sources include solar radiation,
wind energy, hydropower (in all forms), photo-synthetically fixed energy and geother-
mal energy. Appropriate techniques permit the exploitation and conversion of different
renewable energy carriers into secondary or final energy, energy carriers or useful energy,
respectively. Currently, there are tremendous variations in terms of utilization methods,
technology, and given perspectives. However, not all options are possible for every site or
location. The most promising renewable energy options include:
• Solar heat provision by active systems (i.e., solar thermal collector systems),
• Solar thermal electric provision (i.e., solar tower plans),
• Photovoltaic energy conversion systems,
• Power generation by wind energy conversion systems,
• Power generation by hydropower to provide electric energy,
• Utilization of ambient air and shallow geothermal energy for heat provision,
• Utilization of deep geothermal energy resources for heat and/or power provision,
• Wave and tidal energy for electrical energy provision, and
• Utilization of photo-synthetically fixed energy for heat, power, and transportation
fuels.
Solar radiation represents the electromagnetic energy emitted by the Sun, while the
terrestrial solar energy is the portion of the total solar radiation reaching the Earth’s
surface. The terms insolation and irradiance are used interchangeably to define solar radi-
ation incident on the Earth per unit of area per unit of time as measured in W/m 2 or
Wh/m 2/day. The solar radiation amount, reaching the Earth’s surface at any given loca-
tion and time depends on many factors, including time of day, season, latitude, surface
albedo, the atmosphere translucence and the weather conditions. The primary causes
of winds (horizontal atmospheric motions) are the solar radiation uneven Earth and
atmosphere heating and Earth’s rotation. The atmosphere reflects about 43% off the inci-
dent solar radiation back into space, absorbs about 17% of it in the lower troposphere
and transmits the remaining 40% to the surface of the Earth, where much of it is then
reradiated into the atmosphere. The Sun short wavelength radiation (0.15–4 mm) passes
readily through the atmosphere, while the longer wavelengths (5–20 mm) are absorbed
by the atmospheric water vapors. Thus, Earth radiation is primarily responsible for the
warmth of the atmosphere near the Earth’s surface. Heat is also transferred from the
Earth’s surface to the atmosphere by conduction and convection. On average, the total
amount of energy radiated to space from the Earth and its atmosphere must be equiva-
lent to the total solar radiation amount absorbed, or the temperature of the Earth and
its atmosphere would steadily increase or decrease. The more nearly perpendicular the
Sun’s rays strike the Earth, the more solar radiation is transferred through the atmo-
sphere. During the year, tropical regions receive significantly more solar energy than
the polar areas. Winds and ocean currents level out this thermal imbalance, preventing
the tropical regions from getting progressively hotter and the polar regions from getting
progressively colder. In addition, Earth’s surface inhomogeneity—land, water, desert,

forest, rocks, sands and so on—leads to differences in solar radiation absorption and
reflection back to the atmosphere, creating large differences in atmospheric tempera-
tures, densities and pressures, which in turn are shaping the local wind regimes. It may
be worth noting that the power densities per-area by kinetic wind energy and solar radi-
ation are the same order of magnitude, when considering exploitable values in a given
area. At 20 m/s the wind exerts on a vertical plane 1.04 kW/m2, while the solar radiant
flux density on a horizontal surface on June 21st at noon, 50 N latitude is 1.05 kW/m 2.
However, the efficiency conversion is about 40% for wind energy conversion systems and
about 15% for photovoltaic generators.
1.3 Physics and Energy Fundamentals

The term energy is often used without a great deal of thought and is applied in different
context and situations. Scientific energy concept is serving to reveal the common features
in processes such as burning fuels, charging batteries, propelling machines and equip-
ment, etc., so it is worthy to have physical meaning of the energy applied in the technical
context, describing the utilization of the energy resources. Since often many people have
the tendency to mix energy, work and power, this chapter subsection will define these
quantities and point out the differences among them. Energy is broad concept, defined
as the capacity or potential of systems to perform useful work. However, the ability to
perform work from chemical, nuclear, and solar energy is given only if these forms of
energy are transformed into mechanical and/or thermal energy. According to the law of
conservation of energy, the total energy of a system remains constant, though energy may
transform into another form. Input and output work change the energy content of a system
or body. Energy exists in many forms such as mechanical energy, thermal energy, electri-
cal energy, electromagnetic energy, chemical energy, atomic energy, and nuclear energy.
Energy, E, is defined in physics as the capacity of a system to do work, W. Work is the
consequence of expenditure of energy and is defined as the scalar product of force, F, and
the distance, d, its point of application moves during a period of time, being expressed as:

W = F⋅d (1.1)
The SI (International System) unit of energy is the joule (J) or newton-meter (N ⋅ m). When
the force is variable, the work is computed by an integral describing the motion of force,
between two points, a and b. Work and its time derivatives, the instantaneous power is
expressed as:
b

∫
W = F ⋅ dx
a
and

dW dx
= F⋅ = F ⋅v (1.2)
dt dt
For rectilinear motion, work is done by the application of a force. Multiplying Newton’s

Second Law for linear motion by the force F gives:
d 1 2
W = F ⋅v =  mv  (1.3)
dt  2 
Power is the scalar product of force and velocity. Power is the rate at which energy is pro-
duced or consumed, and is expressed as:
dW
P=
dt
or W = Pdt
∫ (1.4)
The joule is also the SI unit of work. In terms of fundamental metric units, the joule (J)
is equal to kg ⋅ m 2 ⋅ s −2. Assuming that power is constant in time, t then the total energy
utilized is:
W = P ⋅t (1.5)
Example 1.1: What is the work done if a force of 100 N moves an object through a
distance of 25 m? What is the average speed of the object if this displacement is carried
out in 10 s? What is the power input?
Solution: Mechanical work, average speed, and input power are calculated as:
W = F ⋅ d = 100 ⋅ 25 = 25, 000 J or 25 kJ
d 100
v= = = 10 m/s
t 10
P = F ⋅ v = 100 ⋅ 10 = 1000 W or 1 kW
The kinematics and dynamics of rotating objects and the work and power in the case of
ratio are very important in energy conversion; most of the energy convertors, such as elec-
tric generators or wind turbines, are rotating devices. The frequency, f, angular velocity, ω,
and angular acceleration, and α is expressed as:
dθ
ω= (rad/s)
dt
(1.6)
dω d 2θ
α= =
dt dt 2
( rad/s )
2
Here θ is an angular displacement (measured in a suitable reference). This can be inte-

grated as:
∫
ω = ω0 + α ⋅ dt
where ω0 is the initial angular velocity. For α constant, above relationship is:
ω = ω0 + α ⋅ t (1.7)
Rotational dynamics is governed by Newton’s Second Law for rotation, expressed by:
dω
τ = I ⋅α = I (N ⋅ m) (1.8)
dt
where τ is an applied torque (shown in Figure 1.1), and I is the mass moment of inertia.
The unit for momentum of inertia is kg ⋅ m 2 , and the unit of angular velocity is rad/s.
The term mass moment of inertia is not to be confused with the area moment of inertia,
which for thin plates of uniform density the mass moment of inertia is the area density,
i.e., mass per unit area, times the area moment of inertia. If, as a special case, α = 0 and/or
I = 0, then τ = 0. The angular momentum of a rotating body is I∙ω, and it can be changed
only by the application of a torque. The mass moment of inertia of a concentrated mass at
a distance R from the axis of rotation is mR2. For any other geometrical shape, the moment
of inertia can be calculated.
In a way similar to the linear motion, for the angular rotation, the mechanical energy
equation is given by:
d 1 2
W = τ ⋅ω =  I ⋅ω  (1.9)
dt  2 
Similar to Equation (1.2), and by using Equation (1.4), in the case of rotation, if a torque τ

rotates an object by an angle Δθ, then the mechanical work done by the torque is:
W = τ ⋅ ∆θ (1.10)
The mechanical power in this case is expressed as:
W ∆θ
P= =τ = τ ⋅ω (1.11)
∆t ∆t
where Δt is the time interval.
FIGURE 1.1
An object rated by an applied torque.
Example 1.2: A cylinder with mass moment of inertia of 100 kg∙m2 is rotating freely at
50 rad/s about its axis of symmetry. What is the constant retarding torque that must be
applied to reduce the velocity to zero in 1 min.? What is the initial power of the cylinder?
Solution: Applying Newton Law for rotation, Equation (1.8), the constant retarding
torque is:
∆ω 50 − 0
τ =I = 100 = 83.333 N ⋅ m
∆t 60
From Equation (1.11) the initial mechanical power of this cylinder is:
P = τ ⋅ ω = 83.333 ⋅ 50 = 4166.7 W
The total energy of a system can be subdivided and/or classified in various ways, being
convenient to distinguish gravitational energy, mechanical energy, thermal energy, sev-
eral types of nuclear energy (which utilize potentials from the nuclear force and the weak
force), electric energy (from the electric field) and magnetic energy (from the magnetic
field), among others. Many of these classifications overlap; for instance, thermal energy
usually consists partly of kinetic and partly of potential energy. Some types of energy
are a varying mix of both potential and kinetic energy. An example is mechanical energy
which is the sum of (usually macroscopic) kinetic and potential energy in a system. Elastic
energy in materials is also dependent upon electrical potential energy (among atoms and
molecules), as is chemical energy, which is stored and released from a reservoir of electri-
cal potential energy between electrons, and the molecules or atomic nuclei that attract
them. Chemical energy is the energy associated with chemical bonds, the interaction
energy between atomic electrons in a material. Energy can be absorbed or released during
a chemical reaction as a result of changes in bonds between atoms. If during this process
the energy is released (exothermic process) is of interest for energy generation. Electrical
energy is associated with the electrons in conductors and is expressed in terms of voltages
and currents. If a current, I, flows through a circuit with a resistance, R, with a voltage, V,
across the resistance, then the power dissipated through the resistance is given by:
V2
P = VI = I 2R = (1.12)
R
Current is measured in amperes (A), voltage in volts (V), and resistance in ohms (Ω). When
the V and I are expressed in volts and amperes, P is expressed in watts. From Equation (1.4),
electrical energy in joule is power in watts multiplied by time in seconds. More often elec-
trical energy is expressed in kilowatt-hours (kWh) by dividing energy in joules by a con-
version factor 3.6 × 106 J/kWh. Energy can be transferred between systems in a variety
of ways, such as the transmission of electromagnetic energy via photons, physical colli-
sions which transfer kinetic energy, and the conductive transfer of thermal energy. Energy
is strictly conserved and is also locally conserved wherever it can be defined. Classical
mechanics distinguishes between kinetic energy, which is determined by an object’s
movement through space, and potential energy, which is a function of the position of an
object within a field. Kinetic energy associated with moving objects defined for an object
of mass, m, moving at velocity v, as:
1
E= mv 2 (1.13)
2
Kinetic energy is also associated with the rotational motion of an object, being given by:
1 2
E= Iω (1.14)
2
where again I is the object momentum of inertia, and ω is the angular velocity. Potential
energy is usually related to the gravitational potential terms, either the concept also applies
to other situations, such energy contained by a compressed spring, the elastic potential
energy. In the case of gravitational potential energy, an object of mass m at a height h has
a potential energy given by:
E = mgh (1.15)
Here g is the acceleration due to the gravitation with an average value g = 9.806 m/s2.
The mechanical energy of a body, E, which is a scalar, can be kinetic, due to its motion,
or potential, due to its mechanical state, for example due to its height above a reference
or the compression of a spring. The total mechanical energy is the sum of the kinetic and
potential energies. Keep in mind that, for total energy balance, one must consider not only
the work input but also the heat input. Mechanical energy is conserved only if there is no
transformation from mechanical to thermal energy. Heat is transferred by a temperature
difference. Thus, the conservation of mechanical energy is expressed as:
Emech = Ekin + Epot (1.16)
We already discussed the kinetic energy for linear motion and rotation. To understand the
potential energy concept, we consider a force being applied so that the body moves very slowly.
The initial and final velocities are assumed to be zero, as are the kinetic energies. The work done
by the force goes into potential energy, as we have assumed that there is no thermal energy
and mechanical energy is conserved. Two examples of potential are discussed here: lifting a
weight and compression of a string. For lifting of a weight, a force is needed to do work against
gravity (this special force is called weight). The potential energy stored in this way is given by:
Epot = mg( z2 − z1 ) = mgh (1.17)
where the weight mg is assumed to be constant, and z1 and z2 are the initial and final heights.
This potential energy only makes sense as a difference. In compression of a spring, also a
force is needed to compress a spring, and the mechanical energy needed is then stored as
energy of compression. In general the force and compression distance are related, such that
F = f ( x)
In a linear spring, the relationship is of the form
F = k⋅x (1.18)
where k is the spring constant. This is the simplest relationship for elastic potential energy,
so the potential energy stored in a spring is then expressed as:
x2
1
∫ kx ⋅ dx = 2 k ( x − x )
2
Epot = 2 1
x1
There are also useful relations for shafts, disks, and other rigid bodies that are rotating.
The mass moment of inertia of a rotating solid cylinder of radius, R, and mass, m, is:
1
I= mR2
2
and its kinetic energy is given by Equation (1.14). In practice, instead of using ω in rad/s,
the rotational speed is usually expressed in revolutions per minute (rpm) n where
2π n
ω= (1.19)
60
Strictly speaking, mass and energy cannot be lost. However, the term is used if the mass
or energy goes in a direction that is not desirable. The term is also very often used with-
out further clarification in energy system in many different ways. (a) In one sense it is a
leakage of mass. If, for example, a certain mass flow rate goes into a machine, and not all
of it comes out where it should, there is a leakage. This could be due to an undesirable
gap within the machine. (b) Another is a loss of energy such as heat transfer to the sur-
roundings. (c) A third is a pressure loss, as what happens when there is a flow along a
pipe. However, these are beyond our textbook and included topics, interested readers are
directed to the references or elsewhere in the literature.
Chemical energy is the one associated with chemical bonds, the energy interaction
between atomic electrons in a material. It can be absorbed or released during chemical reac-
tions, due to the changes in the bonds between the atoms. Processes requiring energy input
for the reaction are known as endothermic, while the ones releasing energy during the reac-
tion are known as exothermic. The last ones are of interests in energy generation. Among the
exothermic processes of great interest are the ones involving the oxidation of carbon, such
as pure carbon oxidation, producing of carbon dioxide and releasing the (thermal) energy.
C + O 2 → CO 2 + 32.8 MJ/kg (1.20)
Pure carbon oxidation is a suitable approximation of burning coal, while other fossil fuels,
such as woods, ethanol, and organic materials, involve the hydrocarbon oxidation. Some
of the simple such reactions are methane (major component of natural gas) and ethanol (a
common biofuel) burning. These reactions are producing steam as by-product. The ener-
gies in these reactions are referred as higher heating values (HHV) and include the latent
heat of vaporization and are recovered the condensation of the produced steam. These two
reactions are given below:
CH 4 + 2O 2 → CO 2 + 2H 2O + 55.5 MJ/kg
(1.21)
CH6 O + 3O 2 → 2CO 2 + 3H 2O + 29.8 MJ/kg
Thermal energy of a gas results from the kinetic energy of the microscopic movement of
molecules. Temperature is a characteristic of a body thermal energy, due to the internal
motion of molecules. Two systems in thermal contact are in thermal equilibrium if they
have the same temperature. In general, if the phase change (e.g., from solid to liquid) is
not involved, the temperature of any material increases as it absorbs heat. The heat required
to rise the system temperature, with specific heat, c, by an amount ∆T is expressed as:
∆Q = mc∆T (1.22)
Example 1.3: The specific heat of water is 4180 J/(kg∙°C). Calculate the energy required
to increase the temperature of 1 kg of water with 25°C.
Solution: By using Equation (1.11) to solve for the heat gives:
Q = (1 kg) ×  4180 J/(kg o C) × 25o C = 1.045 × 10 5 J
However, heat and temperature are different. Heat is the energy, and temperature is the
potential for heat transfer from a hot to a cold place. Materials with large specific heat
require a large amount of heat per unit of mass to rise their temperature by a given amount.
These materials can store large amounts of thermal energy per unit of mass for a small
increase in temperature, having applications in energy storage or solar thermal energy.
In the heat transfer, work can also be done. Understanding of the energy concept arises
from the laws of thermodynamics:
1. Energy is conserved, cannot be created or destroyed, only transformed from one form to
another.
2. Thermal energy, heat, cannot be transformed totally into mechanical work. Systems tend
toward disorder, and in energy transformations, disorder increases. Entropy is a measure
of disorder. This means that some forms of energy are more useful than other
forms. In other words: the heat naturally flows from hot place to a cold place.
Mathematically, the process of energy transfer is described by the first law of thermodynamics:
∆E = W + Q (1.23)
where E is the internal energy, W represents the work done by the system, and Q repre-
sents the heat flow. By convention, Q and W are positive if heat flows into the system and
work is done by the system. When the thermal efficiency of the system is high, the heat
term in Equation (1.19) is ignored:
∆E = W (1.24)
This simplified equation is the one used to define the joule (J), for example. Errors often occur
when working with energy, power, heat, or work. Units and quantities are mixed up fre-
quently quite often. Wrong usage of these quantities and/or units can dramatically change
the statements and cause misunderstandings. To have a simple understanding of this law, we
can consider the behavior of system formed from one piece of hot metal and the other of cold
metal that are brought into thermal contact. The system will attain thermal equilibrium by
transferring heat from hot metal to cold one until the two pieces are at the same temperature.
Other expression of this law is: the entropy of the universe always increases. Entropy is a measure
of disorder. Thus, attaining thermal equilibrium increases the overall universe entropy.
Thermal energy can be used to do work only if heat flows from the hot side to the cold
side of a system. An analogy is the conversion of potential energy into kinetic energy in
mechanical systems. For example, if the water in a reservoir above a hydro-electric station
remains in the reservoir, no electricity is generated. When the water is running down the
hill and through station generators, electricity is generated. In this process, the gravita-
tional potential energy of the stored water is converted into kinetic energy, and subse-
quently into electrical energy. Similarly, the thermal energy contained into hot material
can be converted into other energy forms, which is the principle of heat engine operation.
Besides the two laws of thermodynamics discussed above, there is a third one. It states
that temperature of absolute zero cannot be attained. The third law details and its origin
are not relevant to the textbook topics and are not discussed further. If the heat is moved
from a hot reservoir to a cold reservoir, some of the thermal energy can be converted into
mechanical work, and a device doing this is called: heat engine. Examples of heat engine
include steam turbines, car internal combustion engines, jet engines, etc. Engine operation
consists of removing heat from hot reservoir at temperature, TH, while some of the heat is
deposited into cold reservoir, at temperature TC and some is used to develop mechanical
work. If the removed heat from the hot reservoir is QH, and the deposited heat into cold
reservoir is QC, then the relationship including the developed work is:
QH = QC + W (1.25)
The terms “energy efficiency” and “energy conservation” have often been used interchange-
ably in policy discussions, but they do have very different meanings. Energy conservation
is reduced energy consumption through lower quality of energy services, e.g., lower heat-
ing levels, through turning down thermostat levels, speed limits for cars, and capacity/
consumption limits on appliances, often set by standards. Often it means doing without
saving money or energy. It is strongly influenced by regulations, consumer behavior, and
lifestyle changes. Energy efficiency is simply the ratio of energy services out to the energy
input. It means getting the most out of every unit of energy. It is mainly a technical process
caused by stock turnover where old equipment is replaced by newer more efficient ones.
It is generally a by-product of other social goals: productivity, comfort, monetary savings or
fuel competition. Measuring energy efficiency, particularly on a macro scale, is very diffi-
cult; there are methodological problems and it is very hard to measure between countries or
sectors. Efficiency means different things to the two professions most engaged in achieving
it. To engineers, efficiency means a physical output/input ratio. To economists, efficiency
means a monetary output/input ratio, and also, confusingly, efficiency may refer to the eco-
nomic optimality of a market transaction or process. Physical energy efficiency is defined as:
POUT PIN − Losses

η= = (1.26)
PIN PIN
Example 1.4: An electric motor consumes 100 W of electricity to obtain 87 W of

mechanical power. Determine its efficiency.
Solution: Because power is the rate of energy utilization, efficiency can also be expressed
as a power ratio. The time units cancel out, and we have:
Power Output 87 W
η= = = 0.87 or 87 %
Power Input 100 W
Technical systems perform the energy conversions with various efficiencies. The ratio of QC
and QH can as the ratio the reservoir temperatures. For a heat engine, it can be written as:
QC T
η = 1− = 1− C (1.27)
QH TH
The efficiency form involving cold and hot reservoir temperatures is more convenient
because the temperature is much more easily measured quantity than heat. The efficiency
as stated by Equation (1.27) is known as ideal Carnot efficiency, after the name of French
engineer Sadi Carnot and is the maximum efficiency attainable by a heat engine. Real heat
engines typically operate at efficiencies that can be much less than the Carnot efficiency.
The ideal Carnot efficiency is valid for ideal processes, taking place in either direction
equally, existing in the real world only for limited cases. Time reversible ideal processes
require that net entropy of the S remains constant. An alternative definition of the second
law of thermodynamics is that in any real process dS > 0. Working on the same principles,
as a heat engine is the heat pump, which uses mechanical work to transfer heat from a cold
reservoir to a hot one. Similarly, conservation of energy requires that:
W + QC = QH (1.28)
Example 1.5: What is the thermal efficiency of the most efficient heat engine that can
run between a cold reservoir at 20°C and a hot reservoir at 200°C?
Solution: Carnot engine has the ideal or maximum efficiency, so:
TC 273.15 + 20
η = 1− = 1− = 0.38 or 38%
TH 273.15 + 200
Heat pumps have practical applications for the heat transfer from cold areas/reservoir
to hot ones. They have applications in combined heat and power generation, in recov-
ering the wasted heat, or moving heat from the outside to the inside in a cold day.
However heat pumps may be economically attractive for heating purposes, careful con-
siderations of cost, local climate, and other factors are necessary to assess their viability.
Heat pump performance is expressed through the coefficient of performance (COP), the
ratio of heat deposited in the hot reservoir to the work done, expressed as:
QH
COP = (1.29)
W
COP is a quantity greater than 1 (or, in percent, greater than 100%). Using the relationship
between heat and temperature, COP can be expressed as:
QH TH
COP = = (1.30)
QH − QC TH − TC
In the case of refrigerator, the COP expression is:
QC TC
COP = = (1.31)
QH − QC TH − TC
There are six key quantities, useful in the description of a thermal system, such as thermal
power plant: temperature T, pressure p, specific volume (the inverse of the density, i.e.,
the volume per unit of mass), specific internal energy u, specific enthalpy h and specific
entropy s. However, only two thermodynamic quantities are strictly needed to completely
specify the thermal state of a system. We already introduced the concept of internal energy
(first law of thermodynamics). Here the specific quantities are referred to the unit of mass.
Specific enthalpy is defined as:
h = u + pv (1.32)
Enthalpy is very useful in describing the heat transfer at constant pressure (e.g., in boilers,
or condensers), where the change in the enthalpy is equal to the heat input, or in adiabatic
(Q = 0) compression or expansion (e.g., compressors and turbines), where the network on
the shaft is equal to the change in the enthalpy. The concept of entropy arises from the second
and is a measure of the degree of disorder of a system. From a thermodynamic point of view
there are two types of processes: reversible and irreversible processes. In the first one, the
system and the surroundings can recover their initial states by changing the system slowly
enough that it remains in a quasi-static thermal equilibrium throughout the process. In irre-
versible process the system and the surroundings are changed in such away that they are
not able to return to their original states. Mathematically the entropy change is expressed as:
∆Qrev
∆s = (1.33)
T
Here, ΔQrev is the heat supplied to the system reversible at absolute temperature, T. Notice
that there is no change in entropy in a reversible adiabatic process, where ΔQrev ≈ 0, while
in an irreversible process there is a net increase in entropy.
In some way, nuclear energy is similar with chemical energy, discussed above, being the
energy associated bonds between particles inside the atoms. The most relevant nuclear
energy is the one between the neutrons and protons within the nucleus rather the one to
the bonds between atoms, involving the atomic electrons. Nuclear bonds represent much
larger energy amounts than in chemical bonds. Energy that can be released in nuclear reac-
tions is many order-of-magnitude higher than the one in chemical reactions. The release
of the nuclear energy can be made through the fission (breaking up) of heavy nuclei like
uranium and plutonium or through the fusion (bonding) of light nuclei like isotopes of
hydrogen. It can be estimated through the Einstein’s relationship, involving mass and the
speed of light (300,000 km/s):
E = mc 2 (1.34)
However, the energy released in an exothermic nuclear reaction is given in terms of chang-
ing nuclear mass, expressed as:
Eexo = ∆mc 2 (1.35)
Electromagnetic radiation is associated with the electromagnetic field under the form of
waves, such as light. The electromagnetic radiation covers a very wide range of frequencies
or wavelengths, X-rays, ultraviolet radiation, visible light, infrared radiation, radio waves,
etc. Electromagnetic radiation for the Sun is our most important source of energy, being
responsible for most other energy sources, such as fossil fuels, wind, solar energy, biomass,
etc. Expressed in terms of photons or energy quanta electromagnetic energy is related to
electromagnetic radiation frequency, f and Planck’s constant (h = 6.626 × 10−26 J∙s), through:
E = hf (1.36)
Electromagnetic radiation in the infrared through ultraviolet and X-ray regions, is pro-
duced by electron transitions between atomic energy levels, and can be either artificial
or natural origin. Long wavelength radio waves may be generated by radio transmitters,
radars, etc. High energy, short wavelength radiation commonly comes from excited state
transitions in nuclei.
1.4 Heat Transfer and Essential of Fluid Mechanics

Basically, there three types of heat transfer: conduction, convection and radiation.
Conduction is the thermal transfer process due to the molecule random motions.
The average molecule energies are proportional to the temperature. The heat flow rate,
in the steady-state along the length of bar, d of cross-sectional area, A with one end at
higher temperature, T1 and the other at lower temperature, T2 is given by the Fourier
law of heat conduction:
T1 − T2
Q = kA (1.37)
d
where k (W∙m−1∙K−1) is the thermal conduction of the bar material.
Example 1.6: A steel bar of 2 m and a cross-sectional area of 10 cm2, has at one end a
temperature of 1200°C and 200°C at the other end. Calculate the heat thermal flow along
the bar in the steady-state, ignoring the heat losses from the bar surface, if the steel
thermal conductivity is 50 W∙m−1∙K−1.
Solution: From Equation (1.32) the heat flow along the bar is calculated as:
1200 − 200
Q = 50 × 10 × 10 −4 = 25 W
2
Convection represents the heat transfer through the fluid bulk motion, the actual move-
ment or circulation of a substance. It takes place in fluids, such as water or air, where the
materials are able to flow. Much of the heat transport that occurs in the atmosphere and
ocean is carried by convection. However, the atmospheric circulation consists of vertical
as well as horizontal components, so both vertical and horizontal heat transfer occurs.
Considering a fluid of density ρ, temperature T, and moving with velocity v, then heat flow
rate per unit of area is the product of the mass flow per unit area per second, ρv and the
thermal energy per unit mass, cT:
Q
= ρ vcT (1.38)
A
When a cold fluid is forced to flow over a hot surface, the heat transfer rate in this forced
convection from the surface to the fluid is higher than in the case of a stationary fluid.
The temperature gradient at the surface is very large, and the fluid layer above the surface
is rapidly heated by thermal convection, and the heat transfer rate per unit the area is often
expressed as:
Q k ( TS − T∞ )
= Nu (1.39)
A L
Here, TS and T∞ are the surface and the fluid temperatures, L is the characteristic length,
and Nu is the dimensionless Nusselt parameter. The choice of L depends on the fluid-
surface geometry, while the Nusselt parameter is function of two other non-dimensional
parameters, the Prandtl and Reynolds numbers, depending on the fluid mechanical and
thermal properties, obtained from empirical correlations.
Radiative heat transfer represents the energy transfer through the electromagnetic radia-
tion, which includes the heat transfer into the vacuum. The power per unit area trans-
ferred from a surface at temperature T is given by the Stefan-Boltzmann law:
Prad = εσ T 4 (1.40)
Here, ε is the surface emissivity (a dimensionless number ranging from 0 to 1, depending

on the surface nature), σ ≈ 5.67 × 10−8 W∙m−2∙K−4 is the Stefan-Boltzmann constant. Opaque
surfaces absorb electromagnetic radiation from the environment. The surface absorptiv-
ity and emissivity are the same. The absorption rate per unit of area, for the environment
temperature T0 is:
Pa = εσ T04
The net emission rate per unit of area per unit of time is then given by:
(
Prad = Pe − Pa = εσ T 4 − Ta4 ) (1.41)
A blackbody is a surface that is absorbing all incident electromagnetic radiation. The outer

Sun surface determines the electromagnetic radiation flux incident to the upper Earth
atmosphere. Another important relationship is the one describing mathematically the
relationship between the temperature (T) of the radiating body and its wavelength of
maximum emission (λmax), the Wien’s displacement law:
C
λmax = (1.42)
T
Here, C, the Wien’s constant is equal to 2898 μm∙K.
Example 1.7: By using Wien’s law estimate the maximum wavelengths of the Sun and
the Earth, assuming that the Sun temperature is 6000 K, the one of the Earth is 3000 K.
Solution: Applying Wien’s law for the Sun and the Earth temperatures, we found:
2898
λmax (Sun) = = 0.483 µm
6000
and
2898
λmax (Earth) = = 9.660 µm
300
Radiation is often identified by the effects it produces when it interacts with an object.
We are dividing radiant energy into categories based on our ability to perceive them;
however, all wavelengths of radiation behave in a similar manner. An important differ-
ence among the various wavelengths is that the shorter wavelengths are more energetic.
For example, the Sun emits all forms of radiation, in varying quantities with over 95% of
solar radiation emitted in wavelengths between 0.1 and 2.5 μm, with much of energy con-
centrated in the visible and near-visible parts of the electromagnetic spectrum. The visible
light spectrum band, wavelengths between 0.4 and 0.7 μm, represents over 43% of the
total energy emitted, while the rest lies in the infrared (IR), about 49%, and ultraviolent
(UV), about 7%. In order to have a better understanding how the Sun’s radiant energy
interacts with Earth’s atmosphere and land-sea surface, it is helpful to have a general
understanding of the basic radiation laws. However, this is beyond the scope of this book,
and interested readers are direct to elsewhere in the literature. The radiation is the domi-
nant mode energy transfer mode in the power plant furnaces. The atmosphere effects on
the electromagnetic radiation transmission are very important in determining the Earth
surface temperature.
1.4.1 Basics of Fluid Mechanics

In this section, a very brief summary of the physical properties of fluids is given, neces-
sary to describe and understand the energy conversion in processes, such as wind energy,
hydro power, or wave and tidal power. The bulk physical properties of a fluid are stated
in terms of: fluid density (ρ), mass per unit volume; pressure (p), force per unit of area;
and viscosity, force per unit area due to internal friction arising from the relative motion
between adjacent fluid layers, acting in tangential directions. A useful concept to visual-
ize the fluid velocity field is the notion of the streamline, the lines parallel to the direction
of motion in all points of the fluid. Any fluid mass element flows along a stream-tube
bounded by neighboring streamlines. In applications involving fluids, the forces within
the fluid are often discussed more effectively in terms of fluid pressure, defined by:
Force
Fluid Pressure = p ≡
Area
The pressure on a surface submerged at depth, h in a fluid having density ρ (kg/m3), is
given by:
p = ρ gh (1.43)
And, the force is expressed as:
∫
F = p( h) ⋅ dh
A
One of the fundamental laws of fluid mechanics is the conservation of mass (mass continu-
ity). If the speed of a fluid and the stream-tube cross-sectional area are, u and A, for the
fluid confined in the stream-tube, the mass flow per second is constant, expressed as:
ρ uA = Const. (1.44)
In Equation (1.39), the left side represents the flow rate (in kg/s).
Example 1.8: What is the mass flow rate of water at a given section of a pipe of diameter
10 cm where the fluid velocity is 30 cm/s?
Solution: Assuming the water density to be 1000 kg/m3, the mass flow rate is:
π 
Q = ρ ⋅ u ⋅ A = 1000 ⋅ 0.3 ⋅  0.12  = 2.355 kg/s
4 
In many practical applications, viscous forces are negligible than forces due to the gravity
and pressure gradients over large areas of fluid flows. With this assumption the equation of
energy conservation in a fluid, the Bernoulli equation (theorem), for steady flow is of the form:
p 1
+ gz + u2 = Const. (1.45)
ρ 2
For a stationary case, when u = 0 everywhere in the fluid, Equation (1.45) reduces to:
p
+ gz = Const. (1.46)
ρ
Equation (1.46) is the equation of hydrostatic pressure, stating that the fluid at a given
depth, z is all at the same pressure p, as expressed by the Equation (1.43). The significance
of the Bernoulli Equation is that it states that the pressure in a moving fluid decreases as
the fluid speed increases.
Example 1.9: The atmospheric pressure on the surface of a lake is 105 N/m2. Calculate

the pressure at depth of 10 m, assuming that the water density is 103 kg/m3, and the
water is stationary.
Solution: From Equation (1.46) and the acceleration due to the gravity g = 9.806 m/s2,
z1 = 0, and z2 = 10 m, then:
( )
p2 = patm − ρ g ( z2 − z1 ) = 10 5 − 10 3 (9.806)(0 − 10) = 198, 060 N/m 2
1.5 Future Energy Demand and Environment

Coal and crude oil were not relevant to the energy production until the end of nineteenth
century. Firewood, wind and hydropower techniques were used to provide most of the
energy that was used. Windmills and watermills were the common features of the landscape
for most of the medieval age. Coal become the single most important energy source, after
the discovery by James Watt in 1769 of steam engine, followed of the explosive spread of its
usage in industry and transportation. The steam engine, and later the internal combustion
engine, replaced mechanical wind and water installations at the end of the nineteenth and
beginning of the twentieth centuries. During the first part of the last century, in large part
due to the discovery of huge oil reserves, the oil became a major and cheap energy source,
leading also to an increased motorized transportation. During these periods firewood lost
its importance as an energy source, and large hydro-electric power systems replaced the
watermills. Around and after Second World War the energy demand increased dramati-
cally. For example, the energy consumption in United States increased from 32 quads in
1950s over 100 quads in 2010s. One quad is equal to 1015 Btu. Similar trends are in all devel-
oped countries and in many developing nations.
Much of the energy used today is in the form of electricity. Figure 1.2 shows the share of
energy sources used to generate electricity in the United States. The majority of electricity
comes from fossil fuels, hydropower, atomic and nuclear energy, while a tiny fraction (~1%)
FIGURE 1.2
US energy mix for electricity generation.
comes from other sources. Global energy consumption in the last half of the century has
increased very rapidly and is expected to continue to grow over the next 50 years, with
significant differences between the last 50 years and the next. The past increase was stimu-
lated by relatively “cheap” fossil fuels and increased rates of industrialization in developed
countries yet while energy consumption in these countries continues to increase, addi-
tional factors are making the picture for the next 50 years more complex. These include the
very rapid increase in energy use in China and India (countries representing about a third
of the world’s population), the expected depletion of oil resources sometime in the future
and the effect of human activities on climate change. On the positive side, the renewable
energy technologies of wind, biofuels, fuel cells, wave energy, solar thermal and photovol-
taics are finally showing maturity and the ultimate promise of cost competitiveness.
Our current living standard could not be sustained without energy. The provision of
energy or the related energy services (e.g., heated living spaces, information, and trans-
portation) involves a huge variety of environmental impacts which are increasingly less
tolerated by the society of the twenty-first century, making “the energy problem” a major
topic in engineering education, research and policy of almost all countries. This attitude is
not expected to change within the near future. On the contrary, in view of the increasing
knowledge and recognition of the effects associated with energy utilization in the broadest
sense of term, increased complexity has to be expected. In 2010, the worldwide consump-
tion of fossil primary energy carriers and hydropower account to approximately 450 EJ.
Roughly 28% of this overall energy consumption accounts for Europe and Eurasia, about
27% for North America, 5% for Central and South America, roughly 5% for the Middle East,
3% for Africa and 32% for Asia and the Pacific region. North America, Europe and Eurasia
as well as Asia and the Pacific region consume about 90% of the currently used primary
energy derived from the fossil energy carriers and hydropower. This energy consumption
has increased over 2.5 times in the last four decades.
All energy sources have some environmental impacts, however the impacts vary consid-
erably across the energy spectrum. The energy sources, such as coal or oil, in general fossil
fuels, have harmful effects on the environment compared to the renewable ones, consid-
ered much more benign, even though they have some harmful impacts. Furthermore, fossil
fuel and nuclear energy environmental impacts have gotten worse, due to the population
growth and the increase energy use per capita, as a result of the rise in the worldwide
loving standards. Living standards and the energy use per capita are strongly correlated,
either way are not saying that higher per capita wealth invariably requires higher per
capita energy use. Besides the consumption of fossil fuel energy and pollutant emissions,
pollutants are released into environment during the operation of oil-fired or natural-gas-
fired heating. These pollutants show very different environmental effects. In addition, the
exploitation of fossil fuels is also associated with effects which may damage the envi-
ronment, during the well drilling, oil and natural gas extraction and transportation, oil
processing in refineries or transportation from refinery to the consumers. Some of envi-
ronmental impacts may be ongoing and less dramatic, as for example nuclear plant or coal
mine disasters, oil spills, etc., but may cost many more lives over long time periods.
Without the protection of the atmosphere, the global average temperature would be
about 18°C. Some minor atmospheric constituents, such as CO2, water vapor and methane,
capture significant parts of the incoming solar radiation, acting similarly to a greenhouse.
These atmospheric constituents have natural and artificial origins. Existing natural green-
house effects make the life possible on Earth. Without greenhouse effects, Earth radiation
would be emitted into space. Combined effects of incident solar radiation and the reten-
tion of this heating energy increases the mean global ambient temperature to about +15°C.
Over millennia, a delicate balance was created in the concentration of atmospheric gases
and constituents. However, several natural temperature variations have occurred, during
Earth history, as evidenced by different ice ages. Additional greenhouse gases are emitted
to the atmosphere as a result of energy generation and other human activities. Their effects
on the climate are not fully understood and accepted by the scientific community. The rea-
sons for climate change are controversial. As a fact, part of global temperature increase of
0.6°C during the last century is linked to natural fluctuations, while the rest is believed to
be of anthropogenic origin. Detailed prediction of the anthropogenic greenhouse effect
consequences is not possible. Climatic models are only giving an estimate of what would
happen if the current emissions remain the same or there will be future increases.
1.6 Units and Dimensional Analysis

The dimension of a variable is the kind of quantity that it is, having important significance
in sciences and engineering fields. Fundamental dimensions are mass, length, time, tem-
perature, and electric charge. It is important to distinguish between the quantity, for exam-
ple the mass of an object m, and its dimension M, thus we can write [m] = M, to be read as:
“the dimension of m is M.” Two variables can have the same dimension, like for example
the two sides, a and b, of a rectangle are both lengths, i.e., [a] = L, [b] = L, and so they can
be added or subtracted; both a + b and a − b may have physical meanings. Variables that
are of different dimensions cannot. It is meaningless for the length to be added to the area,
or for a 10 km length to be added to a speed of 5 km/hr. On the other hand, two quantities
of the same or different dimensions can be multiplied, and their product is that of the indi-
vidual dimensions. Variables can also be non-dimensional—for examples, the efficiency
and coefficient of performance. All equations must be dimensionally homogeneous, i.e., all
terms in the equation must have the same dimensions. One important reason for checking
the equation homogeneity of dimensions is that inhomogeneity would indicate an error.
However, a homogeneous equation can still be erroneous though not because of dimen-
sionality. There is an important exception, quite common in engineering. Sometimes it
may seem that an empirically obtained equation is dimensionally inhomogeneous, but
that may be because the dimensions are unknown or are suppressed. It is not enough to
know the dimension of a physical quantity, in order to quantify, it also needs to know
how large it is; thus every physical quantity is associated with a pure number, and cor-
responding units (except for dimensionless quantities). Though in principle we can use
our own units, these units are only useful if they are understood by other people, though
not necessarily by all. Fundamental units are those from which all other units, so-called
derived, are obtained. The quantification of the units is arbitrary, as well as the choice of
which units are fundamental and derived. For example, length can be a fundamental unit
and area the derived, or vice versa. Dimensions and units should not be confused with
each other; a variable can be described by different units that all have the same dimen-
sion. The fundamental units in the International System of Units (Système International
d’Unités or SI) are mass (kilogram, kg), length (meter, m), time (second, s), temperature
difference (kelvin, K), electrical current (ampere, A), luminous intensity (candela, cd) and
moles (mol), see Table 1.2. Other units can be derived from these using definitions or physi-
cal laws. There are also units outside SI that are accepted for use with SI, units such as
minute (min), hour (h), day (d), degree of angle (°), minute of angle (′), second of angle (″),
liter (L), and metric ton (t). To make comparisons of various quantities and to quantify the
magnitude of physical quantities we need a good understanding of units, their definitions
and techniques of dimensional analysis. International System (SI) of units is used through-
out of this book, but a comprehensive list of energy related units, including the ones used
in United States, with conversions is also included. In engineering and science, dimen-
sional analysis is the analysis of the relationships between different physical quantities by
identifying their fundamental dimensions (such as length, mass, time, and electric charge)
and units of measure (such as miles vs. kilometers, or pounds vs. kilograms vs. grams) and
tracking these dimensions as calculations or comparisons are performed. Converting from
one dimensional unit to another is often somewhat complex.
Dimensional analysis, also known as the unit-factor method, is a widely used for per-
forming conversions using the rules of algebra. Any physically meaningful equation (and
any inequality and in-equation) must have the same dimensions on the left and right sides.
Checking this is a common application of performing dimensional analysis. Dimensional
analysis is also routinely used as a check on the plausibility of derived equations and com-
putations. It is generally used to categorize types of physical quantities and units based
on their relationship to or dependence on other units. SI is founded on seven SI base units
for seven base quantities assumed to be mutually independent, as given in Table 1.3. Other
quantities, called derived quantities, are defined in terms of the seven base quantities
via a system of quantity equations. The SI derived units for these derived quantities are
obtained from the physics principles and equations and the seven SI base units. The fact
that energy exists in many forms was one of the reasons that we have several units for
TABLE 1.2
SI Base Units
Base Quantity Name Symbol
Length Meter m
Mass Kilogram kg
Time Second s
Electric current Ampere A
Temperature Kelvin K
Amount of substance Mole Mol
Luminous intensity Candela cd
TABLE 1.3
Most Common Energy Units
Unit Name Definition
Joule (J) Work done by ace of 1 N acting through 1 m (also W-s)
Erg Work done by 1 dyne force acting through 1 cm
Calorie (Cal) Heat needed to raise the temperature of 1 g of water by 1°C
BTU Heat needed to raise the temperature of 1 lb of water by 1°F
kWh Energy of 1 kW of power flowing for 1 hour
Quad 1015 BTU
Electron-Volt Energy gained by an electron through 1 V potential difference
Foot-pound Work done by 1 lb force acting through 1 ft
Megaton Energy released when a million tons of TNT explodes
this physical quantity. For example, for heat we have calories, British thermal units (BTUs),
joules, ergs; foot-pound for mechanical energy; kilowatt hours (kWh) for electrical energy;
and electron-Volts (eV) for nuclear and atomic energy. However, since all describe the same
fundamental quantity, there are conversion relationships or factors relating them. Table 1.3
lists some of the most common energy units.
Example 1.10: Show that physical dimensions of the expression of the hydrostatic
pressure, p = ρgh are consistent with physical dimensions of pressure, fluid density,
acceleration due to gravity, and height.
Solution: Replacing the individual symbols in the equation of the hydrostatic pressure
in terms of their fundamental physical units, we have:
p = ρ gh
( )( ) ( )( )
 p  SI = kg ⋅ m−3 ms−2 ( m ) = kg ⋅ m ⋅ s−2 m−2 = N ⋅ m−2
Hence the hydrostatic pressure, p = ρgh is consistent with physical dimensions of

pressure, force per unit of area.
It is clear then that physical quantities that have different dimensions cannot be converted
from one to the other. For instance, weight that is a force (normally gravitational) with
which the one body attracts another and cannot be converted to mass though the two
are frequently confused. Unfortunately, in today engineering and applied sciences areas,
many power and energy units sound similar and proper care must be taken when we are
dealing and using them. The terms energy and power are quite often used informally
as they are synonymous (e.g., electrical energy or power, wind energy or wind power).
It is important to have a clear distinction and understanding of these terms. The unit of
power is Watt (W). The British (imperial) unit, still in use in United States, is the British
thermal unit (Btu, 1 Btu = 1055 J). However, the Btu is commonly used in thermal pro-
cesses to designate thermal energy. For a system to produce or consume power there must
be forceful motion of some of its components. In practice is often convenient to express
the energy in terms of power used for a specific period of time. For example, if the power
of an electric motor is 1 KW, and is running for an hour, the energy consumed is one
kilowatt-hour (kWh). All the systems used for the performance of several tasks desired
by the human society generate work and consume energy resources. Energy is also often
measured simply in terms of fuel quantities used, such as tons of coal or oil. According
with the energy definition a kilogram of coal, a liter or a gallon of oil are potential sources
of energy. The motion of a body is a type of work. Heat represents another form of energy.
Wind or running water are able to move the blades of a rotor. Similarly, sunlight can be
converted into heat, being another form of energy. Energy transfer usually refers to move-
ments of energy between systems which are closed to transfers of matter. The portion of the
energy which is transferred by conservative forces over a distance is measured as the work
the source system does on the receiving system. The portion of the energy that does not work
during the transfer is called heat. In other words, heat or thermal energy is a form of energy
that is transferred from materials or systems at higher temperatures to ones at lower tempera-
tures. It is usually produced by combustion of fuels, which are regarded as energy sources.
1.7 Summary
The chapter discusses some of the background topics of the energy, and the information
introduces the purpose and scope of this book. It discusses fundamental issues of energy,
fossil fuels, environmental impacts of electricity generation and energy use, and renew-
able energy alternatives. We are facing an increased energy demand all over the world,
but especially in developing countries. The use of alternative energy and alternative use
of the conventional energy sources must be considered as options of sustainable develop-
ment. The challenges for the implementation of new energy technologies and sources was
reviewed. Viable energy sources and technologies must be sustainable and economically
competitive with conventional sources and technologies. Remaining chapters examine
the major renewable energy sources, their characteristics, performances and applications.
The chapter is providing a brief review of basic principles of energy conversion, conserva-
tion of energy, basic electric circuit laws, energy concepts, and units. In the chapter is also
included with examples a discussion of the ways in which primary energy sources can
be transformed into forms suitable for applications and direct use. These conversion pro-
cesses rely on the appropriate technologies but are also governed by the fundamental laws
of physics. Finally, the chapter briefly discussed the future of energy generation, conver-
sion and use. The book is intended to be used as a required textbook for an undergraduate
renewable energy course. However, it can be used to provide foundation for everyone
interested in alternative energy technologies.
Questions and Problems

1. Is the quality of life better with electricity or without? Explain.
2. Describe how a specific energy-related process can affect the environment.
3. Convert: a) 1 kJ in Btu, and b) 1000 kg crude oil equivalent per year into kW.
4. What is the difference between energy and power? Define the energy and power.
5. What is the efficiency and what is the Carnot efficiency?
6. What is quad?
7. Should 100 kWh be converted into W or J? Do the conversion.

8. Express the total USA energy usage in 2015?
9. How many kWh would generate in 30 days a 1000 MW power plant?
10. Show that the physical dimension of kinetic energy is equivalent with the one of work.
11. Using dimensional analysis verify that the hydrostatic pressure in a fluid is con-
sistent with the dimension of pressure.
12. When the gravity is considered a source of renewable energy?
13. The power input to a machine is 150 W, and the useful output is 80 W. What is the
efficiency of the machine?
14. What is the heat rate generated?
15. Besides hydro power, what are the most important renewable energy sources for
your state or country?
16. In what part of the electromagnetic spectrum does solar radiation have the highest
intensity?
17. A rock of 10 kg falls from 100-m high bridge. If the change in its potential energy
is converted into electricity with an efficiency of 85%, how long this energy illumi-
nate a standard 30-W light bulb?
18. Compare the energy scales associated with 1 kg of coal by computing: a) the poten-
tial energy by dropping it 100 m, b) burning it; and c) converting its mass into energy.
19. What is the power rating of your car? Convert it into kW. What is the fuel effi-
ciency (mpg or km/L).
20. A body of 0.5 kg is moving at 20 m/s. What work is need to stop that body over
10 m distance?
21. What is the kinetic energy of a wheel of mass moment of inertia 100 kg·m2 rotating
at 500 rpm?
22. A snowball of 0.25 kg is thrown at 10 m/s. How much kinetic energy does it
possess? What happens to that kinetic energy after a person is hit with this
snowball?
23. A 10 cm long, 5 cm diameter steel rod (density of steel = 8050 kg/m3) is rotating
around its axis of symmetry. What is the angular acceleration if a torque of 75 Nm
is applied to the rod?
24. How much energy is needed to accelerate a shaft-mounted disk of mass moment
of inertia 10,000 kg m2 from 1000 rpm to 30,000 rpm?
25. Shows the physical dimensions of the kinetic energy are consistent with the physi-
cal dimension of work.
26. If, during rotation, the mass moment of inertia of a rotating object could be halved,
how will its angular velocity change?
27. What is the thermal efficiency of the most efficient heat engine that operates
between a cold reservoir at 20°C and a hot reservoir at 250°C?
28. For your home estimate the power installed for lightning and for major appliances
(computers, TV sets, fridge, electric stove, washing machine, dryer, etc.). The esti-
mate the electrical energy used in one year.
29. Consider a compound slab, consisting of two materials having thicknesses, L1

and L2, and the thermal conductivities, k1 and k 2, respectively. If the outer tem-
peratures are T2 and T1, find the heat transfer rate through the slab in a steady
state. Numerical application: L1 = 20 cm, L2 = 30 cm, k1 = 50 W∙m−1∙K−1, and
k 2 = 60 W∙m−1∙K−1.
30. A heat engine operates between a temperature of 20°C and 150°C. What is the
efficiency of the engine if it works at 75% of the maximum possible Carnot
efficiency?
31. A refrigerator operates between a temperature of 21°C and −8°C. What is the COP
of the refrigerator if it works at 83% of the maximum possible Carnot COP?
32. A 10 HP electric motor is 85% efficient. How much heat does it generate?
33. What is the coefficient of performance of a refrigerator that uses 150 W to remove
1350 W from a cold chamber? What is the coefficient of performance of the same
device if it is used as a heat pump?
34. Determine the temperature of a computer chip package of 1 cm 2 surface area
that is dissipating 1 W of heat to an airstream which is at 20°C. Assume that all
the heat goes into the air and the convective heat transfer coefficient is 100 W/
m 2·K.
35. Describe the relationship between the temperature of a radiating body and the
wavelengths it emits.
36. If the Earth had no atmosphere, its radiation emission would be lost quickly to
the outer space, making its temperature about 33 K cooler. Calculate the rate of
radiation emitted and the wavelength of the wavelength of maximum radiation
emission for the Earth at 255 K.
37. Assuming that the atmospheric pressure at the surface of a fluid is stationary and
equal to 105 N/m2, calculate the change in percent due to a wind of 25 m/s, assum-
ing that air density is 1.225 kg/m3.
38. An incompressible fluid flows at a speed of 5 m/s through a pipe of 0.5 m diameter
in which a constriction of 0.2 m diameters has been inserted. What is the fluid
speed in the constriction?
39. If the flow rate of water that enters and leaves a cooling chamber is 1 kg/s. What
is the heat rate that must be extracted from the water to reduce its temperature by
20°C?
40. Calculate the expression of the speed of jet of water emerging from an orifice in a
dam at a depth h bellow the water surface. Assume the water surface and the jet
are at atmospheric pressure, p.
41. How much does 1 m3 of water at 4°C weigh (not its mass, but its weight)?
42. An incompressible ideal fluid flows through a pipe with diameter of 0.5 m with
a constriction of 0.15 m. If the fluid speed into the pie is 2 m/s, what is the fluid
speed inside the constriction?
43. Briefly describes the importance of the international system of units.
44. List the SI fundamental units.
45. Briefly describes the accepted energy units, and what the reasons of using them.
References and Further Readings

1. F. Bueche, Introduction to Physics for Scientists and Engineers, McGraw-Hill, London, UK, 1975.
2. G. Boyle, Renewable Energy: Power for a Sustainable Future, Oxford University Press, Oxford, UK,
2012.
3. G. Boyle, B. Everett, and J. Ramage, editors, Energy Systems and Sustainability, Oxford University
Press, Oxford, UK, 2003.
4. R. E. Putman, Industrial Energy Systems: Analysis, Optimization and Control, ASME, New York,
2004.
5. T. D. Eastop, and D. R. Croft, Energy Efficiency for Engineers and Technologists, Longman, Harlow,
UK, 1990.
6. J. Casazza, and F. Delea, Understanding Electric Power Systems: An Overview of Technology, the
Marketplace, and Government Regulation (2nd ed.), John Wiley & Sons, Hoboken, NJ, 2010.
7. A. W. Culp, Jr., Principles of Energy Conversion (2nd ed.), McGraw-Hill, New York, 1991.
8. V. Quaschning, Understanding Renewable Energy Systems, Earthscan, London, UK, 2006.
9. R. A. Ristinen and J. J. Kraushaar, Energy and Environment, John Wiley & Sons, Hoboken, NJ,
2006.
10. J. Andrews and N. Jelley, Energy Science, Principles, Technology and Impacts, Oxford University
Press, Oxford, UK, 2007.
11. E. L. McFarland, J. L. Hunt, and J. L. Campbell, Energy, Physics and the Environment (3rd ed.),
Cengage Learning, Mason, OH, 2007.
12. F. Kreith and D. Y. Goswami, editors. Handbook of Energy Efficiency and Renewable Energy, CRC
Press, Boca Raton, FL, 2007.
13. N. Jenkins, J. B. Ekanayake and G. Strbac, Distributed Generation, The IET Press, London, UK,
2010.
14. F. M. Vanek and L. D. Albright, Energy Systems Engineering: Evaluation and Implementation,
McGraw-Hill, New York, 2008.
15. B. K. Hodge, Alternative Energy Systems and Applications, John Wiley & Sons, Chichester, UK,
2010.
16. B. Everett and G. Boyle, Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed),
Oxford University Press, Oxford, UK, 2012.
17. F. R. Spellman, Environmental Impacts of Renewable Energy, CRC Press, Boca Raton, FL, 2014.
18. R. A. Dunlap, Sustainable Energy, Cengage Learning, Stamford, CT, 2015.
19. V. Nelson and K. Starcher, Introduction to Renewable Energy (Energy and the Environment), CRC
20. R. Bansal (Ed.), Handbook of Distributed Generation: Electric Power Technologies Economics and
Environmental Impacts, Springer, Cham, Switzerland, 2017.
21. R. Belu, Industrial Power Systems with Distributed and Embedded Generation, The IET Press,
London, UK, 2018.
Energy, Environment, and Renewable Energy
F. Bueche , Introduction to Physics for Scientists and Engineers, McGraw-Hill, London, UK, 1975.
G. Boyle , Renewable Energy: Power for a Sustainable Future, Oxford University Press, Oxford, UK, 2012.
G. Boyle , B. Everett , and J. Ramage , editors, Energy Systems and Sustainability, Oxford University Press,
Oxford, UK, 2003.
R. E. Putman , Industrial Energy Systems: Analysis, Optimization and Control, ASME, New York, 2004.
T. D. Eastop , and D. R. Croft , Energy Efficiency for Engineers and Technologists, Longman, Harlow, UK,
1990.
J. Casazza , and F. Delea , Understanding Electric Power Systems: An Overview of Technology, the
Marketplace, and Government Regulation (2nd ed.), John Wiley & Sons, Hoboken, NJ, 2010.
A. W. Culp, Jr. , Principles of Energy Conversion (2nd ed.), McGraw-Hill, New York, 1991.
V. Quaschning , Understanding Renewable Energy Systems, Earthscan, London, UK, 2006.
R. A. Ristinen and J. J. Kraushaar , Energy and Environment, John Wiley & Sons, Hoboken, NJ, 2006.
J. Andrews and N. Jelley , Energy Science, Principles, Technology and Impacts, Oxford University Press,
Oxford, UK, 2007.
E. L. McFarland , J. L. Hunt , and J. L. Campbell , Energy, Physics and the Environment (3rd ed.), Cengage
Learning, Mason, OH, 2007.
F. Kreith and D. Y. Goswami , editors. Handbook of Energy Efficiency and Renewable Energy, CRC Press,
Boca Raton, FL, 2007.
N. Jenkins , J. B. Ekanayake and G. Strbac , Distributed Generation, The IET Press, London, UK, 2010.
F. M. Vanek and L. D. Albright , Energy Systems Engineering: Evaluation and Implementation, McGraw-Hill,
New York, 2008.
B. K. Hodge , Alternative Energy Systems and Applications, John Wiley & Sons, Chichester, UK, 2010.
B. Everett and G. Boyle , Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed), Oxford
University Press, Oxford, UK, 2012.
F. R. Spellman , Environmental Impacts of Renewable Energy, CRC Press, Boca Raton, FL, 2014.
R. A. Dunlap , Sustainable Energy, Cengage Learning, Stamford, CT, 2015.
V. Nelson and K. Starcher , Introduction to Renewable Energy (Energy and the Environment), CRC Press,
R. Bansal (Ed.), Handbook of Distributed Generation: Electric Power Technologies Economics and
R. Belu , Industrial Power Systems with Distributed and Embedded Generation, The IET Press, London, UK,
2018.
Solar Energy Resources

B. Y. Liu and R. C. Jordan , The inter relationship and characteristic distribution of direct, diffuse and total solar
radiation, Solar Energy, Vol. 4(3), pp. 119, 1960.
A. B. Meinel , and M. P. Meinel , Applied Solar EnergyAn Introduction, Addison-Wesley, Reading, MA, 1976.
E. Kreith and J. F. Kreider , Principles of Solar Engineering, Hemisphere Publishing, Washington, DC, 1978.
M. Iqbal , Estimation of the monthly average of the diffuse component of total insolation on a horizontal surface,
Solar Energy, Vol. 20(1), pp. 101105, 1978.
J. Almorox and C. Hontoria , Global solar estimation using sunshine duration in Spain, Energy Conversion and
Management, Vol. 11(3), pp. 170172, 1967.
M. Collaress-Pereira and A. Rabl , The average distribution of solar radiation, Solar Energy, Vol. 22(2), pp.
155164, 1979.
H. P. Garg , Treatise on Solar Energy, Vol. 1: Fundamentals of Solar Energy Research, John Wiley & Sons,
Chichester, UK, 1982.
J. E. Sherry and C. G. Justus , A simple hourly all-sky solar radiation model based on meteorological
parameters, Solar Energy, Vol. 32(2), pp. 195204, 1984.
J. A. Davies and D. C. McKay , Estimating solar irradiance and components, Solar Energy, Vol. 29(1), pp.
5564, 1985.
T. Muneer and C. S. Saluja , A brief review of models for computing solar radiation on inclined surfaces, Energy
Conversion and Management, Vol. 25, pp. 443458, 1985.
J. S. Hsieh , Solar Energy Engineering, Prentice-Hall, Englewood Cliffs, NJ, 1986.
M. Igbal , An Introduction to Solar Radiation, Academic Press, Toronto, ON, 1983.
G. Zerault , Solar radiation instrumentation, in Solar Resources ( R. L. Hulstrom ed.), MIT Press, Cambridge,
MA, 1989.
T. Muneer , Solar Radiation and Daylight Models (2nd ed.), Elsevier, Oxford, UK 2004.
V. Badescu (ed.), Modeling Solar Radiation at the Earths Surface, Recent Advances, Springer, Berlin,
Germany, 2008.
2013 ASHRAE Handbook-Fundamentals, American Society of Heating, Refrigeration and Air Conditioning
Engineers (ASHRAE), Atlanta, GA, 2013.
D. Y. Goswami , F. Kreith , and J. F. Krieder , Principles of Solar Engineering (3rd ed.), Taylor & Francis Group,
T. Muneer , S. Younes , and S. Munawwar , Discourses on solar radiation modeling, Renewable & Sustainable
Energy Review, Vol. 11(4), pp. 551602, 2007.
J. A. Duffie , and W. A. Beckman , Solar Engineering of Thermal Processes (3rd ed.) John Wiley & Sons,
Hoboken, NJ, 2006.
B. K. Hodge , Alternative Energy Systems and Applications, Wiley, Chichester, UK, 2010.
C. J. Chen , Physics of Solar Energy, John Wiley & Sons, Hoboken, NJ, 2011.
M. Boxwell , Solar Energy Handbook, Greenstream Publishing, London, UK, 2011.
M. R. Patel , Wind and Solar Power Systems: Design, Analysis, and Operation (2nd ed.), CRC Press, Boca
Raton, FL, 2015.
A. Vieira da Rosa , Fundamentals of Renewable Energy, Academic Press, London, UK, 2009.
E. E. Michaelidis , Alternative Energy Sources, Springer, Berlin, Germany, 2012.
N. Enteria and A. Akbarzadeh , Solar Energy Sciences and Engineering Applications, CRC Press, Boca Raton,
FL, 2013.
S. A. Kalogirou , Solar Energy Engineering: Processes and Systems, Academic Press, Amsterdam, the
Netherlands, 2013.
D. Y. Goswami , Principles of Solar Engineering, CRC Press, Boca Raton, FL, 2013.
G. N. Tiwari , A. Tiwari , and Shyam , Handbook of Solar Energy Theory, Analysis and Applications, Springer,
Singapore, 2016.
M. Martn (Ed.), Alternative Energy Sources and Technologies, Springer, Singapore, 2016.
2018.
C. Gueymard and D. Thevenard , Revising ASHRAE climatic data for design and standards Part 2: Clear-sky
solar radiation model, ASHRAE Transactions, Vol. 119(2), pp.194209, 2013.
A. B. Meinel and M. P. Meinel , Applied Solar Energy: An Introduction, Addison-Wesley, Reading, MA, 1976.
M. Igbal , An Introduction to Solar Radiation, Academic Press, Toronto, Canada, 1983.
T. Muneer , Solar Radiation and Daylight Models (2nd ed.), Elsevier, Oxford, UK, 2004.
J. K. Page , The estimation of monthly mean values of daily total short-wave radiation on vertical and inclined
surfaces from sunshine records or latitudes 40N40S, Proceedings of UN Conference on New Sources of
Energy, Vol. 4, pp. 378380, 1966.
J. L. Threlkeld and R. C. Jordan , Direct solar radiation available on clear days, Transactions on ASHRAE, Vol.
64, p. 4555, 1958.
E. L. Maxwell , and D.R. Myers , Daily estimates of aerosol optical depth for solar radiation models. In
Proceedings of the 1992 Annual Conference of the American Solar Energy Society, pp. 323327. Pacific
Northwest Research Station, Corvallis, OR, 1992.
Solar Collectors and Solar Thermal Energy Systems

F. Bueche , Introduction to Physics for Scientists and Engineers, McGraw-Hill, New York, 1975.
K. L. Coulson , Solar and Terrestrial Radiation, Academic Press, New York, 1975.
B. Anderson , Solar Energy: Fundamentals in Building Design, McGraw-Hill, New York, 1977.
J. P. Lunde , Solar Thermal Engineering, John Wiley & Sons, New York, 1980.
J. C. Zimmerman , Sun Pointing Programs and Their Accuracy, Sandia National Laboratories Report SAND81-
0761, September 1981.
E. E. Anderson , Fundamentals of Solar Energy Conversion, Addison-Wesley, Reading, MA, 1982.
A. Rabl , Active Solar Collectors and their Applications, Oxford University Press, New York, 1985.
M. Iqbal , An Introduction to Solar Radiation, Academic Press, Toronto, ON, 1983.
J. A. Duffie and G. A. Backman , Solar Engineering of Thermal Processes, John Wiley & Sons, New York,
1991.
B. Norton , Solar Energy Thermal Technology, Springer-Verlag, London, UK, 1992.
J. Gordon (Ed.), Solar Energy: The State of the Art, James and James, London, UK, 2001.
I. Dincer and M. Rosen , Thermal Energy Storage: Systems and Applications, John Wiley & Sons, New York,
2002.
F. P. Incropera and D. P. DeWitt , Introduction to Heat Transfer, John Wiley & Sons, New York, 2002.
R. Siegel and J. R. Howell , Thermal Radiation Heat Transfer (4th ed.), Taylor & Francis Group, New York,
2002.
M. Norm , Methods of Testing to Determine Thermal Performance of Solar Collectors, ANSI/ASHRAE Standard
19932003, Washington, DC, 2003.
F. P. Incropera , D. P. Dewitt , T. L. Bergman , and A. S. Lavine , Introduction to Heat Transfer, (5th ed.) John
Wiley & Sons, New York, 2007.
F. Kreith , and D. Y. Goswami , Handbook of Energy Efficiency and Renewable Energy, CRC Press, Boca
Raton, FL, 2007.
D. Y. Goswami and F. Kreith , Energy Conversion. CRC Press, Boca Raton, FL, 2008.
M. R. Patel , Wind and Solar Power Systems (2nd ed.), CRC Press, Boca Raton, FL, 2006.
G. Boyle , Renewable EnergyPower for a Sustainable Future, Oxford University Press, Oxford, UK, 2012.
R. A. Ristinen and J. J. Kraushaar , Energy and Environment, John Wiley & Sons, Hoboken, NJ, 2006.
Oxford, UK, 2007.
A. Vieira da Rosa , Fundamentals of Renewable Energy Processes (2nd ed.), Academic Press, Waltham, MA,
2009.
B. K. Hodge , Alternative Energy Systems and Applications, John Wiley & Sons, Hoboken, NJ, 2010.
B. Everett and G. Boyle , Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed), Oxford
F. Kreith and J. F. Kreider , Principles of Sustainable Energy, CRC Press, Boca Raton, FL, 2012.
J. A. Duffie and W. A. Beckman , Solar Engineering of Thermal Processes (4th ed.), John Wiley & Sons,
Hoboken, NJ, 2013.
FL, 2013.
S. A. Kalogirou , Solar Energy Engineering: Processes and Systems, Academic Press, Amsterdam, the
Netherlands, 2013.
D. Y. Goswami , Principles of Solar Engineering, CRC Press, Boca Raton, FL, 2013.
G. N. Tiwari , A. Tiwari , and Shyam , Handbook of Solar Energy Theory, Analysis and Applications, Springer,
Singapore, 2016.
M. Martn (ed.), Alternative Energy Sources and Technologies, Springer International Publishing Switzerland,
Switzerland, 2016.
Photovoltaic Systems and Applications

G. Boyle , Renewable EnergyPower for a Sustainable Future, Oxford University Press, Milton Keynes, England,
2012.
R. A. Ristinen and J. J. Kraushaar , Energy and Environment, Wiley, Hoboken, NJ, 2006.
Oxford, UK, 2007.
E. L. McFarland , J. L. Hunt and J. L. Campbell , Energy, Physics and the Environment (3rd ed.), Cengage
L. E. Chaar , L. A. Iamont , and N. E. Zein , Review of photovoltaic technologies, Renewable and Sustainable
Energy Reviews, Vol. 15, pp. 21652175, 2011.
B. Everett and G. Boyle , Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.), Oxford
R. A. Messenger and J. Venter , Photovoltaic Systems Engineering (3rd ed.), CRC Press, Boca Raton, FL,
2010.
M. R. Patel , Wind and Solar Power Systems, CRC Press, Boca Raton, FL, 1999.
B. Parida , S. Iniyan , and R. Goic , A review of solar photovoltaic technologies, Renewable and Sustainable
H. Andrei , V. Dogaru-Ulieru , G. Chicco , C. Cepisca , and F. Spertino , Photovoltaic applications. Journal of
Materials Processing Technology, Vol. 181, pp. 267273, 2007.
E. E. Michaelides , Alternative Energy Sources, Springer, Berlin, Germany, 2012.
I. Bostan , A. Gheorghe , V. Dulgheru , I. Sobor , V. Bostan , and A. Sochirean , Resilient Energy
SystemsRenewables: Wind, Solar, Hydro, Springer, Dordrecht, the Netherlands, 2013.
S. C. W. Krauter , Solar Electric Power GenerationPhotovoltaic Energy Systems, Springer, New York, 2006.
R. Foster , M. Ghassemi , and A. Cota (eds.), Solar EnergyRenewable Energy and the Environment, CRC
R. Belu , Tracking Systems: Maximum Power and Sun, in Encyclopedia of Energy Engineering & Technology
(Online) (eds. Dr. Sohail Anwar , R. Belu et al.), CRC Press/Taylor & Francis, doi:10.1081/E-EEE-
120048434/31 pages.
A. Luque and S. Hegedus , Handbook of Photovoltaic Science and Engineering, John Wiley & Sons, New York,
2011.
H. Haberlin , Photovoltaics System Design and Practice, John Wiley & Sons, Hoboken, NJ, 2012.
D. R. Myers , Solar RadiationPractical Modeling for Renewable Energy Applications, CRC Press, Boca Raton,
FL, 2013.
FL, 2014.
D. Y. Goswami , Principles of Solar Engineering (3rd ed.), CRC Press, Boca Raton, FL, 2015.
M. Martn (Ed.), Alternative Energy Sources and TechnologiesProcess Design and Operation, Springer,
Switzerland, 2016.
G. N. Tiwari , A. Tiwari and Shyam , Handbook of Solar EnergyTheory, Analysis and Applications, Springer,
Singapore, 2016.
S. R. Wenham , M. A. Green , M. E. Watt and R. Corkish , Applied Photovoltaics, Earthscan, London, UK,
2007.
G. M. Masters , Renewable and Efficient Electric Power Systems (2nd ed.), Wiley, Hoboken, NJ, 2014.
NFPA 70 , 2008 National Electrical Code (NEC), NFPA, Quincy, MA, 2008.
Wind Energy Resources

N. Jenkins , J. Walker , Wind Energy Technology, Wiley, Chichester, UK, 1997.
E. L. Petersen , N. G. Mortensen , L. Landberg , et al., Wind power meteorology. Part I: Climate and turbulence,
Wind Energy, Vol. 1(1), pp. 2545, 1998.
E. L. Petersen , N. G. Mortensen , L. Landberg , et al., Wind power meteorology, Part II: Siting and models,
Wind Energy, Vol. 1(2), pp. 5572, 1998.
N. Jenkins , T. Burton , D. Sharpe , E. Bossanyi , Wind Energy Handbook, John Wiley & Sons, Chichester, UK,
2001.
T. Burton , D. Sharpe , N. Jenkins , and E. Bossanyi , Wind Energy Handbook, John Wiley & Sons, Chichester,
UK, 2001.
J. Manwell , J. McGowan , and A. Rogers , Wind Energy Explained: Theory, Design and Application, John
Wiley & Sons, New York, 2002.
B. K. Hodge , Alternative Energy Systems and Applications, Wiley, Chichester, UK, 2010.
L. Landberg , L. Myllerup , O. Rathmann , E. L. Petersen , B. H. Jrgensen , J. Badger , and N. G. Mortensen ,
Review wind resource estimation: An overview, Wind Energy, Vol. 6, pp. 261271, 2003.
M. R. Patel , Wind and Solar Power System, 2nd Edition, 2005, 143181, CRC Press, Boca Raton, FL.
L. Freris , and D. G. Infield , Wind Energy in Power Systems, John Wiley & Sons, Chichester, UK, 2008.
A. Schaffarczyk , (Ed.), Understanding Wind Power, Wiley, Chichester, UK, 2014.
M. Martn , (Ed.), Alternative Energy Sources and Technologies, Springer, Heidelberg, Germany, 2016.
V. Lyatkher , Wind Power, Wiley/Scrivener Publishing, Boston, MA, 2014.
M. C. Brower , (Ed.), Wind Resource Assessment, A Practical Guide, Wiley, Hoboken, NJ, 2014.
R. Belu , Wind energy conversion and analysis, In Encyclopedia of Energy Engineering and Technology (Ed.
Sohail Anwar ), Vol. 3, 27 p, Taylor & Francis Group, Boca Raton, FL, 2014.
J. Andrews , and N. Jelley , Energy Science, Principles, Technology and Impacts, Oxford University Press,
Oxford, 2007.
E. L. McFarland , J. L. Hunt , and J. L. Campbell , Energy, Physics and the Environment (3 ed.), Cengage
Learning, Boston, MA, 2007.
R. Belu , and D. Koracin , Wind energy analysis and assessment, Advances in Energy Research, Vol. 20(1),
pp. 155, 2015.
S. Emeis , Wind Energy Meteorology, Springer, Cham, Switzerland, 2013.
L. Landberg , L. Myllerup , O. Rathmann , E. L. Petersen , B. H. Jrgensen , J. Badger , and N. G. Mortensen ,
Review wind resource estimation: An overview, Wind Energy, Vol. 6, pp. 261271, 2003.
O. Probst , and D. Crdenas , State of the art and trends in wind resource assessment, Energies Vol. 3, pp.
10871141, 2010.
H. Basumatary , E. Sreevalsan , K. K. Sai , Weibull parameter estimates: A comparison of different methods,
Wind Engineering, Vol. 29, pp. 309315, 2005.
T. P. Chang , Estimation of wind energy potential using different probability density functions, Applied Energy,
Vol. 88, pp. 18481856, 2011.
T. P. Chang , Performance comparison of six numerical methods in estimating Weibull parameters for wind
energy application, Applied Energy, Vol. 88, pp. 272282, 2011.
R. A. Dunlap , Sustainable Energy, Cengage Learning, Boston, MA, 2015.
R. Bansal (Ed.), Handbook of Distributed Generation: Electric Power Technologies, Economics and
2018.
R. Belu and D. Koracin , Wind characteristics and wind energy potential in Western Nevada, Renewable
Energy, Vol. 34(10), pp. 22462251, 2009.
Wind Energy Conversion Systems

H. K. Hodge , Alternative Energy Systems and Applications, Wiley, Hoboken, NJ, 2010.
L. L. Freris , Wind Energy Conversion Systems, Prentice Hall, Hemel Hempstead, UK, 1990.
K. H. Bergey , 6, Lanchester-Betz Limit, American Institute of Aeronautics and Astronautics, Vol. 3, pp. 382384,
1980.
I. Bostan , A. Gheorghe , V. Dulgheru , I. Sobor , V. Bostan , and A. Sochirean , Resilient Energy
SystemsRenewables: Wind, Solar, Hydro, Springer, Berlin, Germany, 2013.
R. Belu , Wind Turbine Dynamic Modeling and Control, (doi:10.1081/E-EEE-120048431/29 pages), in
Encyclopedia of Energy Engineering & Technology (Online) (Ed: Dr. Sohail Anwar , R. Belu et al.), CRC
Press/Taylor & Francis Group, 2014.
R. Belu , Wind Energy Conversion and Analysis, (doi:10.1081/E-EEE-120048430/27 pages), in Encyclopedia of
Energy Engineering & Technology (Online) (Ed: Dr. Sohail Anwar , R. Belu et al.), CRC Press/Taylor & Francis
Group, 2014.
M. R. Patel , Wind and Solar Power Systems, CRC Press, Boca Raton, FL, 1999.
P. Gipe , Wind Energy Comes of Age, John Wiley & Sons, New York. 1995.
G. L. Johnson , Wind Energy Systems (Electronic Edition), Kansas University Reprints, Manhattan, KS, 2006.
Paraschivoiu, I. , Wind Turbine Design with Emphasis on Darrieus Concept, Polytechnic International Press,
Montreal, QC, 2002.
Burton, T. , D. Sharpe , N. Jenkins , and E. Bossanyi , Wind Energy Handbook, John Wiley & Sons, Berlin,
Germany, 2001.
R. Gasch and J. Twele , Wind Power Plants: Fundamentals, Design, Construction and Operation, James and
James, London, and Solarpraxis, Berlin, Germany, 2002.
J. G. McGowan , J. F. Manwell , and A. L. Rogers , Wind Energy Explained: Theory, Design and Applications.
John Wiley & Sons, Chichester, UK, 2002.
T. Ackermann , (Ed.), Wind Power in Power Systems, Wiley, Hoboken, NJ, 2005.
S. Mathew , Wind Energy Fundamentals, Resource Analysis and Economics, Springer, Berlin, Germany, 2005.
E. Hau , Wind Turbines, Fundamentals, Technologies, Application, Economics (2nd ed.), Springer, Berlin,
Germany, 2005.
M. Sathyajith , Wind Energy: Fundamentals, Resource Analysis and Economics, Springer Verlag, Berlin,
Germany, 2006.
M. O. L. Hansen , Aerodynamics of Wind Turbines (2nd ed.), Earthscan, London, UK, 2008.
M. Stiebler , Wind Energy Systems for Electric Power Generation, Springer, Berlin, Germany, 2008.
V. Nelson , Wind Energy, Renewable Energy and the Environment, CRC Press, Boca Raton, FL, 2009.
A. R. Jha , Wind Turbine Technology, CRC Press, Boca Raton, FL, 2011.
P. Jain , Wind Energy Engineering, McGraw-Hill, New York, 2011.
S. Muyeen , (Editor), Wind Energy Conversion SystemsTechnology and Trends, Springer, Berlin, Germany,
2012.
D. Rekioua , Wind Power Electric SystemsModeling, Simulation and Control, Springer, Berlin, Germany, 2012.
M. H. Ali , Wind Energy Systems: Solutions for Power Quality and Stabilization, CRC Press, Boca Raton, FL,
2012.
H. Wagner and J. Mathur , Introduction to Wind Energy Systems, Springer, Berlin, Germany, 2013.
V. Lyatkher , Wind Power, Wiley/Scrivener Publishing, Boston, MA, 2014.
P. M. Pardalos , S. Rebennack , M. V. F. Pereira , N. A. Iliadis , and V. Pappu , (Editors), Handbook of Wind
Power Systems, Springer, Berlin, Germany, 2014.
A. P. Schaffarczyk , Introduction to Wind Turbine Aerodynamics, Springer, Berlin, Germany, 2014.
V. Lyatkher , Wind PowerTurbine Design, Selection, and Optimization, WileyScrivener Publishing, Hoboken,
NJ, 2014.
A. P. Schaffarczyk , (Ed.), Wind Power TechnologyTheory, Deployment and Optimization, John Wiley & Sons,
Hoboken, NJ, 2014.
R. Bansal (Ed.), Handbook of Distributed GenerationElectric Power Technologies, Economics and
Environmental Impacts, Springer, Berlin, Germany, 2017.
2018.
IEC 61400 Standard Wind Turbines, International Electrotechnical Commission, IEC 2005, Geneva,
Switzerland.
Geothermal Energy
L. J. P. Muffler and R. Cataldi , Methods for regional assessment, Geothermics, Vol. 7, pp. 5389, 1978.
T. J. Ahrens , Rock Physics and Phase Relations (ed.), AGU Press, Washington, DC, 1995.
E. Barbier , Nature and technology of geothermal energy: A review, Renewable and Sustainable Energy
Reviews, Vol. 1 (12), pp. 169, 1997.
E. Barbier , Geothermal energy technology and current status: An overview, Renewable and Sustainable
A. V. da Rosa , Fundamentals of Renewable Energy Processes, Academic Press, Cambridge, MA, 2005.
J. Twidell , T. Weir , and A. D. Weir , Renewable Energy Resources, Taylor & Francis Group, Abingdon, UK,
2005.
R. DiPippo , Geothermal Power Plants: Principles, Applications and Case Studies (2nd ed.), Elsevier Advanced
Technology, Oxford, UK, 2008.
J. Tester , E. Drake , M. Driscoll , M. Golay , and W. Peters , Sustainable Energy: Choosing Among Options,
The MIT Press, Cambridge, MA, 2005.
R. Bertani , World geothermal energy production, GeoHeat Center Bulletin, Vol. 28, pp. 819, 2007.
V. Nelson , and K. Starcher , Introduction to Renewable Energy (2nd ed.), CRC Press, Boca Raton, FL, 2015.
W. E. Glassley , Geothermal Energy: Renewable Energy and the Environment (2nd ed.), CRC Press, Boca
Raton, FL, 2015.
D. R. Boden , Geologic Fundamentals of Geothermal Energy, CRC Press, Boca Raton, FL, 2017.
S. K. Sanyal , and S. J. Butler , Feasibility of Geothermal power generation from petroleum wells, Transactions
Geothermal Resources Council, Vol. 33, pp.673680, 2009.
S. K. Sanyal , and S. J. Butler , Geothermal power from wells in non-convective sedimentary formationsAn
engineering economic analysis, Transactions Geothermal Resources Council, Vol. 33, pp. 865870, 2009.
I. W. Johnston , G. A. Narsilio , and S. Colls , Emerging geothermal energy technologies, KSCE Journal of Civil
Engineering,, Vol. 15, pp. 643653, 2011.
B. Everett , and G. Boyle , Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.),
C. Luo , Huang, L. Gong, Y. , and W. Ma , Thermodynamic comparison of different types of geothermal power
plant systems and case studies in China, Renewable Energy, Vol. 48, pp. 155160, 2012.
R. A. Dunlap , Sustainable Energy, Cengage Learning, Boston, MA, 2015.
Boca Raton, FL, 2015
V. Nelson , and K. Starcher , Introduction to Renewable Energy (Energy and the Environment), CRC Press,
W. E. Glassley , Geothermal Energy: Renewable Energy and the Environment (2nd ed.), CRC Press, Boca
Raton, FL, 2015.
D. R. Boden , Geologic Fundamentals of Geothermal Energy, CRC Press, Boca Raton, FL, 2017.
Hydropower and Marine Energy

F. Bueche , Introduction to Physics for Scientists and Engineers, McGraw-Hill, New York, 1975.
R. A. Ristinen and J. J. Kraushaar , Energy and Environment, Wiley, Hoboken, NJ, 2006.
Oxford, UK, 2007.
E. L. McFarland , J. L. Hunt , and J. L. Campbell , Energy, Physics and the Environment (3rd ed.), Cengage
F. M. Vanek and L. D. Albright , Energy Systems Engineering: Evaluation and Implementation, McGraw-Hill,
New York, 2008.
J. Twidell , and T. Weir , Renewable Energy Sources (2nd ed.), Taylor & Francis Group, London, UK, 2006.
B. Sorensen et al., Renewable Energy Focus Handbook, Academic Press, London, UK, 2009.
M. A. El-Sharkawi , Electric EnergyAn Introduction, CRC Press, Boca Raton, FL, 2009.
A. Vieira da Rosa , Fundamentals of Renewable Energy Processes, Academic Press, London, UK, 2009.
B. K. Hodge , Alternative Energy Systems and Applications, Wiley, Hoboken, NJ, 2010.
H. J. Wagner , and M. Jyotirmay , Introduction to Hydro Energy SystemsBasics, Technology and Operation,
Springer, Berlin, Germany, 2011.
B. Everett , and G. Boyle , Energy Systems and Sustainability: Power for a Sustainable Future (2nd ed.),
R. Belu , Hydroelectric power systems, small, in Encyclopedia of Energy Engineering & Technology (Online)
(eds, A. Anwar et al.), Taylor & Francis Group, Vol. 2, 2014.
V. Nelson , and K. Starcher , Introduction to Renewable Energy (Energy and the Environment), CRC Press,
E. E. Michaelidis , Alternative Energy Sources, Springer, New York, 2012.
H. J. Wagner , and M. Jyotirmay , Introduction to hydro energy systemsBasics, technology, KSCE Journal of
Civil Engineering, Vol. 15(4), pp. 643653, 2010. doi:10.1007/s12205-011-0005-7.
F. R. Spellman , Environmental Impacts of Renewable Energy, CRC Press, Boca Raton, FL, 2014.

Previewpdf

Uploaded by

Copyright:

Available Formats

Previewpdf

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Previewpdf

Uploaded by

Copyright:

Available Formats

What are the different types of renewable energy sources discussed in the document?

What are the different types of renewable energy sources discussed in the document?

What are some of the challenges associated with developing renewable energy technologies?

What are some of the challenges associated with developing renewable energy technologies?

Nano and Energy Series

FUNDAMENTALS AND SOURCE

Sohail Anwar, Pennsylvania State University, Altoona College, USA

Nanotechnology: Business Applications and Commercialization

Nanotechnology: Ethical and Social Implications

A History of the Workplace: Environment and Health at Stake

Alternative Energy Technologies: An Introduction with Computer Simulations

Computational Nanotechnology: Modeling and Applications with MATLAB®

For more information about this series, please visit:

© 2020 by Taylor & Francis Group, LLC

No claim to original U.S. Government works

Printed on acid-free paper

International Standard Book Number-13: 978-0-367-26139-9 (Hardback)

Library of Congress Cataloging-in-Publication Data

Names: Belu, Radian, author.

Visit the Taylor & Francis Web site at

and the CRC Press Web site at

eResource material is available for this title at

1. Energy, Environment, and Renewable Energy .................................................................1

2. Solar Energy Resources ....................................................................................................... 29

3. Solar Collectors and Solar Thermal Energy Systems ................................................... 67

3.4 Solar Collectors, Types, and Characteristics ............................................................. 92

4. Photovoltaic Systems and Applications ......................................................................... 145

5. Wind Energy Resources .................................................................................................... 197

5.5 Wind Resource Statistics ............................................................................................ 219

6. Wind Energy Conversion Systems .................................................................................. 253

7. Geothermal Energy ............................................................................................................ 303

7.3 Direct Use of Geothermal Energy ............................................................................ 322

8. Hydropower and Marine Energy ....................................................................................345

Appendix A ................................................................................................................................. 389

Radian Belu, PhD, is an associate professor in the Electrical Engineering Department at

1.1 Introduction, Basic Energy Concepts, Fossil Fuels Sources

1.2 Renewable Energy Sources

progressively colder. In addition, Earth’s surface inhomogeneity—land, water, desert,

1.3 Physics and Energy Fundamentals

For rectilinear motion, work is done by the application of a force. Multiplying Newton’s

W = F ⋅ d = 100 ⋅ 25 = 25, 000 J or 25 kJ

Here θ is an angular displacement (measured in a suitable reference). This can be inte-

Similar to Equation (1.2), and by using Equation (1.4), in the case of rotation, if a torque τ

The mechanical power in this case is expressed as:

where Δt is the time interval.

From Equation (1.11) the initial mechanical power of this cylinder is:

Emech = Ekin + Epot (1.16)

Epot = mg( z2 − z1 ) = mgh (1.17)

In a linear spring, the relationship is of the form

C + O 2 → CO 2 + 32.8 MJ/kg (1.20)

Q = (1 kg) ×  4180 J/(kg o C) × 25o C = 1.045 × 10 5 J

POUT PIN − Losses

Example 1.4: An electric motor consumes 100 W of electricity to obtain 87 W of

In the case of refrigerator, the COP expression is:

Eexo = ∆mc 2 (1.35)

1.4 Heat Transfer and Essential of Fluid Mechanics

Here, ε is the surface emissivity (a dimensionless number ranging from 0 to 1, depending

A blackbody is a surface that is absorbing all incident electromagnetic radiation. The outer

Here, C, the Wien’s constant is equal to 2898 μm∙K.