Macro Basebands

BASEBAND 6620
The BB 6620 is a self-maintained 19-inch unit baseband. Each unit can be installed
in any 19-inch rack or cabinet or in an RBS. It is generally configured with Remote
Radio Units (RRUs), which are designed to be located near the antenna. An optical
cable connects each RRU to the main unit. Optical cables are available in standard
lengths, ranging from a few meters to several hundred meters.
CARRIER CONFIGURATI
CAPABILITI ON
ES EXAMPLES
GSM, Up to 12
WCDMA, sectors with 20
LTE, G+W MHz 4T4R TDD
cells
DETAILS Up to 6 sectors
 Optimi with 40 MHz
zed for main- 4T4R TDD cells
remote
configuration PORTS
s  Power:  2
 19 (-48V)
inches wide,  EC:  RJ45
1U high,  LMT:
<352mm RJ45
deep  TN:  2 x
 15 10G (SFP/SFP+)
& 2 x 1G (RJ45)
SFP/SFP+
for CPRI  IDLe:  2 x
inter-connect XCede
to Radio  CPRI:  15
Units SFP/SFP+
reducing the  Sync:
need for RJ45
Baseband  Ext.
R503 Alarms:  8 (2 x
RJ45)
 2
Optical  SAU:  1
1/10Gbps
SFP/SFP+
ports and 2
electrical
1Gbps RJ45
ports
  8
External
Alarm ports
 Dual
48V DC
power
feeding
 Self-
contained
environment
al control &
field
replaceable
fan unit
 Hardw
are prepared
for NR (5G)
and eCPRI
 Typica
l power
consumption
estimated to
123W (at
25C and
typical load)

BASEBAND 6303
DETAILS
 For macro radio system
 LTE (FDD & TDD
supported
 4000 connected
users
 600 Mbps Downlink
& 250 Mbps Uplink
 1000/500 VoiP
users (FDD/TDD)
 Up to 12 cells & 480
MHz antenna BW
 WCDMA
 576 CE Downlink &
2048 EUL CE Uplink
  Up to 12 cell carriers
 180 HS Codes
 GSM
 Up to 24 TRX
 Mixed Mode: G+W
 PoE out for e.g. microwave
backhaul
 Backhaul cascading
 Size incl. support and PSU
4.9 liters and weight 5.1kg
 3x CPRI interfaces
 AC or DC
 IP65, -40 to +55 C

BASEBAND 6630

 Highest capacity in smallest form factor

CONFIGURATION
EXAMPLES
Up to 18 sectors with 20
MHz 4T4R TDD cells
Up to 9 sectors with 40 MHz
4T4R TDD cells

PORTS
 Power:  2 (-48V)
 EC:  RJ45
 LMT:  RJ45
 TN:  2 x 10G (SFP/SFP+)
& 2 x 1G (RJ45)
 IDLe:  2 x XCede
 CPRI:  15 SFP/SFP+
CARRIER CAPABILITIES  Sync:  RJ45
GSM, WCDMA, LTE, G+W, G+L, W+L, G+W+L  Ext. Alarms:  8 (2 x RJ45)
 SAU:  1
DETAILS
 Optimized for main-remote
configurations
 19 inch wide, 1U high, <352mm deep
 15 SFP/SFP+ for CPRI inter-connect to
Radio Units reducing the need for Baseband
R503
 2 optical 1/10Gbps SFP/SFP+ ports and
2 electrical 1Gbps RJ45 ports

 8 external alarm ports

BASEBAND 6318

 5G NR Ready
 Max NR throughput DL
5Gbps and UL 1Gbps
 NB IoT Support
 Midband support 3
sectors 100MHz, 16/8 layers
 High band support 1
sector 800MHz, 2 layers
 LTE (FDD & TDD)  GPS Receiver
 8000 connected users,  6x CPRI/eCPRI interfaces
2000 Mbps Downlink & 1000Mbps (SFP/SFP+)
Uplink  8 External Alarms
 2000/1000 VoiP users  Weight: <15 kg
(FDD/TDD)
 Volume: 18 liters
 24 LTE cells & up to
 Rail, wall or pole mount
1920 MHz antenna BW
 -48VDC 2-wire, Max 200W
 WCDMA
 Normal operating temp: -40 to
 1152 CE Downlink &
+55 C
4096 EUL CE Uplink
 Passive Cooling (no fans)
 24 cell carriers, 360 HS
Codes
 GSM - 48 TRX  Outdoor IP65
 Mixed Mode: L+W, L+G, W+G,
L+W+G
 Elastic RAN
 Backhaul Cascading

Micro Baseband
BASEBAND 6502
Massive MIMO
cell sites
project radio in
narrow beams
directed to the
users – similar
to a spot light. 
Multiple beams
can be created
which will
dynamically
adjust to user
locations &
usage.  The
end result is an
increase in
signal and a
reduction in
interference
from other
users in the
sector –
improved
throughput to
each user in the
sector
 LTE
(FDD & TDD
supported)
 1000
connected
users*
 600
 Mbps Downlink
& 250 Mbps
Uplink*
 288 CE
Downlink &
1024 EUL CE
Uplink**
 Full
Macro SW
feature parity
 Integrate
d
GPS/GLONASS
receiver with
antenna
 PoE out
for e.g.
microwave
backhaul
 Backhaul
cascading
 Size incl.
support and
PSU ~ 4,9 liters
and weight ~
5,1 kg
 3x CPRI
interfaces
 AC or DC
 IP65, -40
to + 55 ̊C