Scribd Logo
Upload

Welcome to Scribd!

  • 171 views

    Aisi 4620 Alloy Steel (Uns g46200)

    Uploaded by

    Salvador Aviles
    AISI 4620 alloy steel is a nickel-manganese-molybdenum alloy with good strength and toughness that can be heat treated to obtain high strength. It contains 1.65-2% nickel, 0.45-0.65% manganese, 0.2-0.3% molybdenum, and 0.17-0.22% carbon. AISI 4620 steel exhibits a tensile strength of 510 MPa and yield strength of 370 MPa when annealed. It can be readily machined, formed, welded, forged, and worked both hot and cold within specific temperature ranges and has applications that benefit from its heat treatability and mechanical properties

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aisi 4620 Alloy Steel (Uns g46200)

    Uploaded by

    Salvador Aviles
    171 views4 pages
    AISI 4620 alloy steel is a nickel-manganese-molybdenum alloy with good strength and toughness that can be heat treated to obtain high strength. It contains 1.65-2% nickel, 0.45-0.65% manganese, 0.2-0.3% molybdenum, and 0.17-0.22% carbon. AISI 4620 steel exhibits a tensile strength of 510 MPa and yield strength of 370 MPa when annealed. It can be readily machined, formed, welded, forged, and worked both hot and cold within specific temperature ranges and has applications that benefit from its heat treatability and mechanical properties

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    AISI 4620 alloy steel is a nickel-manganese-molybdenum alloy with good strength and toughness that can be heat treated to obtain high strength. It contains 1.65-2% nickel, 0.45-0.65% manganese, 0.2-0.3% molybdenum, and 0.17-0.22% carbon. AISI 4620 steel exhibits a tensile strength of 510 MPa and yield strength of 370 MPa when annealed. It can be readily machined, formed, welded, forged, and worked both hot and cold within specific temperature ranges and has applications that benefit from its heat treatability and mechanical properties

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    171 views4 pages

    Aisi 4620 Alloy Steel (Uns g46200)

    Uploaded by

    Salvador Aviles
    AISI 4620 alloy steel is a nickel-manganese-molybdenum alloy with good strength and toughness that can be heat treated to obtain high strength. It contains 1.65-2% nickel, 0.45-0.65% manganese, 0.2-0.3% molybdenum, and 0.17-0.22% carbon. AISI 4620 steel exhibits a tensile strength of 510 MPa and yield strength of 370 MPa when annealed. It can be readily machined, formed, welded, forged, and worked both hot and cold within specific temperature ranges and has applications that benefit from its heat treatability and mechanical properties

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    AISI 4620 Alloy Steel (UNS G46200)

    AII 4620 Allo teel (UN G46200)


    Written by AZoM Sep 26 2012

    Topics Covered
    Introduction
    Chemical Composition
    Physical Properties
    Mechanical Properties
    Other Designations
    Fabrication and Heat Treatment
    Machinability
    Forming
    Welding
    Heat Treatment
    Forging
    Hot Working
    Cold Working
    Tempering
    Hardening

    Introduction
    Alloy steels are designated by AISI four­digit numbers and are more susceptible to heat
    and mechanical treatments than carbon steels. They comprise different kinds of steels
    having compositions which exceed the limitations of Va, Cr, Si, Ni, Mo, C and B in the
    carbon steels.

    The following datasheet provides an overview of AISI 4620 alloy steel, which has good
    strength and toughness. AISI 4620 alloy steel can be heat treated to obtain high strength.

    Chemical Composition
    The chemical composition of AISI 4620 alloy steel is listed in the following table.

    Element Content (%)
    Iron, Fe 96.405 ­ 97.38

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6764
    1
    /4
    AISI 4620 Alloy Steel (UNS G46200)

    Nickel, Ni 1.65 ­ 2
    Manganese, Mn 0.450 ­ 0.650
    Molybdenum, Mo 0.2 ­ 0.3
    Carbon, C 0.170 ­ 0.220
    Silicon, Si 0.150 ­ 0.350
    Sulfur, S 0.04
    Phosphorous, P 0.0350

    Physical Properties
    The following table shows the physical properties of AISI 4620 alloy steel.

    Properties Metric Imperial


    Density 7.85 g/cm3 0.284 lb/in3
    Melting point 1421°C 2590°F

    Mechanical Properties
    The mechanical properties of annealed AISI 4620 alloy steel are outlined in the following
    table.

    Properties Metric Imperial


    Tensile strength, ultimate 510 MPa 74000 psi
    Tensile strength, yield 370 MPa 53700 psi
    190­210 27557­
    Modulus of elasticity
    GPa 30458 ksi
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel)) 80 GPa 11600 ksi
    Poissons ratio 0.27­0.30 0.27­0.30
    Elongation at break (in 50 mm) 31.30% 31.30%
    Reduction of area 60.30% 60.30%
    Hardness, Brinell 149 149
    Hardness, Knoop (converted from Brinell hardness) 169 169
    Hardness, Rockwell B 80 80
    Hardness, Vickers (converted from Brinell hardness) 155 155
    Machinability (hot rolled and cold drawn. Based on 100
    65 65
    machinability for AISI 1212 steel)

    Other Designations
    Other designations that are equivalent to AISI 4620 alloy steel include the following:

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6764
    2
    /4
    AISI 4620 Alloy Steel (UNS G46200)

    AMS 6294
    AMS 6294C
    ASTM A29 (4620)
    ASTM A322 (4620)
    ASTM A331 (4620)
    ASTM A505
    ASTM A519 (4620)
    ASTM A535 (4620)
    ASTM A646 (4620­3)
    ASTM A752 (4620)
    ASTM A829
    SAE J1397 (4620)
    SAE J404 (4620)
    SAE J412 (4620)
    MIL SPEC MIL­S­7493 (A4620)

    Fabrication and Heat Treatment

    Machinability
    AISI 4620 steel can be easily machined in annealed or normalized conditions.

    Forming
    Forming of AISI 4620 steel can be performed in annealed or normalized conditions.

    Welding
    AISI 4620 steel can be welded using conventional methods.

    Heat Treatment
    AISI 4620 steel can be heat treated at 843ºC (1550ºF) and oil quenched. This steel can
    be normalized at 927ºC (1700ºF) and then air cooled prior to heat treatment.

    Forging
    AISI 4620 steel can be forged at temperature ranging from 982 to 1232ºC (1800 to
    2250ºF).

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6764
    3
    /4
    AISI 4620 Alloy Steel (UNS G46200)

    Hot Working
    Hot working of AISI 4620 steel can be performed at 816 to 1038ºC (1500 to 1900ºF).

    Cold Working
    AISI 4815 steel can be cold worked in the annealed conditions using conventional
    methods.

    Tempering
    Tempering of AISI 4620 steel can be done at 204 to 704ºC (400 to 1300ºF) based on the
    desired strength levels.

    Hardening
    AISI 4620 steel can be hardened by heat treatment or cold working.

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6764
    4
    /4

    You might also like