SPECIFICATION

RTS-822A RTS-825A RTS-822R5 RTS-825R5 STANDARD PACKAGE COMPONENTS

Carrying Case X 1 Screw Driver X 1
TELESCOPE
Charger X 1 Wiping Cloth X 1
Length 154mm Battery X 2
Multi-port Cable X 1
Lens Cover X 1
Rain Cover X 1
TOTAL STATION
Objective Lens Diameter Telescope: 45mm Distance Meter: 50mm

RTS-820 series
User Manual X 1 Carrying Belt X 2
Magnification 30X
Plumb X 1 Reflecting Sheet X 1
Image Erect Adjusting Pin X 1 Warranty Card X 1
Field of View 1 30 SD-Card X 1 (for RTS-820R5) Transfer Software CD X 1
Mini-USB Cable X 1 (for RTS-820R5)
Resolving Power 3
Mini. Focus 1.0m
DISTANCE MEASUREMENT OPTIONAL ACCESSORIES
Single Prism 2000m
*1
5000m
*1

*2
Non-Prism N/A 500m
Accuracy -Prism Mode (2mm+2ppm x D)m.s.e. *3
-Non-Prism Mode N/A (3mm+2ppm x D)m.s.e. *3
*4
Measuring Time Fine: 1.2s, Normal: 0.7s Fine: 0.3s, Normal: 0.2s
Meteorologic Correction Manual Input Auto Sensing
Prism Constant Manual Input
ANGLE MEASUREMENT
Method Absolute Encoding
Detecting System H: 2 sides, V: 2 sides
1 /5 Single Prism System Triple Prism System
Min. Reading
TPS11 TPS30
Accuracy 2 5 2 5
Diameter of Circle 79mm
Vertical Angle 0 Zenith 0 /Horizontal: 0
Unit 360 /400gon/6400mil
DISPLAY
Display Unit Graphic LCD 160 x90 Dots with White Backlight
No.of Unit 2 sides
Keyboard Alphanumeric Key
TILT CORRECTION
Tilt Sensor Single Axis Dual Axis
Method Liquid Electric
Range 3 4
Accuracy 1
LEVEL SENSITIVITY Wooden Tripod ATS-2

Plate Level 30 /20mm Aluminum Tripod ATS-1 Prism Pole Prism System TPS107
Circular Level 8 /2mm
OPTICAL PLUMMET (OPTIONAL: INTERNAL LASER PLUMMET)
Image Erect
Magnification 3X
Focusing Range 0.3m ~
Field of View 5
DATA STORAGE & INTERFACE
Internal Memory >10,000 points or > 20,000 coordinates
Data Interface RS 232 RS 232/SD-card/Mini-USB
GENERAL
*5
Laser Class -EDM Class II Class IIIA
-Laser Plummet Class II
Working Temperature -20 ~ 50
Battery Type Rechargeable Ni-H Battery
Battery Voltage DC 6V
Working Time 8h 16h
*1. Good condition: No haze, visibilityabout 40km, overcast, no scintillation.
*2. With Kodak Grey Cardwhite side (90% reflectivity).
*3. D stands for distance.
*4. Typically, under goodcondition, non-prism measuring time may differ according to measuring target, observation situations, and environmental conditions.
*5. According to FDA21 CFRCh.1 .1040.

RUIDE SURVEYING INSTRUMENT CO.,LTD.

Add: 2/F, Surveying Building, No.26 Ke Yun Road, 510665 Guangzhou, China
Dealer Info Tel: +86-20-23380961 Fax: +86-20-23380962
http:// www.ruideinstrument.com
E-mail: [email protected] [email protected]
MAIN FEATURES POWERFUL PROGRAM

[EDM]
An innovative EDM technology
delivers up to 500m non-prism
range and 5km in prism mode.
Incredibly fast measuring speed
enables you record a point in
just 0.3 seconds.

[DISPLAY & KEYBOARD]

[COGO]
Large screen with white backlight COGO is a suite of programs used in civil engineering for solving coordinate geometry problems. It
provides a clear and comfortable employs some basic types of elements such as points, spirals, lines, curve, etc. to calculate the inverse,
azimuth and distance, area, line and offset.
display. With alphanumeric keyboards
on both sides, you can type a word [PROGRAM]
or number fast and easily. RTS-820 series provides various surveying programs which are normally used in the survey job, including
2-point reference line, reference arc, measuring the HD, VD and SD between 2 points, remote elevation
measurement, measuring distance and offset values on vertical plane, measuring distance and offset
values on the slope plane, and road design.

DATA TRANSFER SOFTWARE

[DATA TRANSFER]
Various options for data transfer
are available: SD-card, mini-USB
and RS 232. Internal memory is
capable to store up to 20,000
points.

[T-P SENSOR]
Equipped with an accurate
sensor of temperature and
pressure. You no longer
need to measure the
temperature and pressure
and insert the PPM values.

[RTS TRANSFER]
The transfer software RTS TRANSFER provides a complete and easy-to-use solution for data exchange
between the total station and the computer, as well as transferring to DXF format.

Detailed raw data and coordinates data can be downloaded to the computer, and you can also edit and
upload coordinates data and road data to the total stations.

After you download your coordinates data to the computer, you can post process the data like changing
the element order, and convert it to DXF file which can be used in AutoCAD.