Guidance On Key Considerations For The Identifi Cation and Selection of Safer Chemical Alternatives
Guidance On Key Considerations For The Identifi Cation and Selection of Safer Chemical Alternatives
Guidance On Key Considerations For The Identifi Cation and Selection of Safer Chemical Alternatives
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
PUBE
Please cite this publication as:
OECD (2021), Guidance on Key Considerations for the Identification and Selection of Safer
Chemical Alternative, OECD Series on Risk Management, No. 60, Environment, Health and Safety,
Environment Directorate, OECD.
© OECD 2021
Applications for permission to reproduce or translate all or part of this material should be
made to: Head of Publications Service, [email protected], OECD, 2 rue André-Pascal,
75775 Paris Cedex 16, France
About the OECD
The Environment, Health and Safety Division publishes free-of-charge documents in twelve different
series: Testing and Assessment; Good Laboratory Practice and Compliance Monitoring; Pesticides;
Biocides; Risk Management; Harmonisation of Regulatory Oversight in Biotechnology; Safety of
Novel Foods and Feeds; Chemical Accidents; Pollutant Release and Transfer Registers; Emission
Scenario Documents; Safety of Manufactured Nanomaterials; and Adverse Outcome Pathways.
More information about the Environment, Health and Safety Programme and EHS publications is available
on the OECD’s World Wide Web site (www.oecd.org/chemicalsafety/).
This publication was developed in the IOMC context. The contents do not necessarily reflect
the views or stated policies of individual IOMC Participating Organizations.
The Inter-Organisation Programme for the Sound Management of Chemicals (IOMC) was
established in 1995 following recommendations made by the 1992 UN Conference on
Environment and Development to strengthen co-operation and increase international co-
ordination in the field of chemical safety. The Participating Organisations are FAO, ILO,
UNDP, UNEP, UNIDO, UNITAR, WHO, World Bank and OECD. The purpose of the IOMC
is to promote co-ordination of the policies and activities pursued by the Participating
Organisations, jointly or separately, to achieve the sound management of chemicals in relation
to human health and the environment.
FOREWORD 3
Foreword
This guidance was developed with the aim to advance broader agreement on a general
approach and criteria for the selection of safer alternatives, with a focus on chemical
substitution. It is intended to advance a consistent understanding of the minimum
requirements needed to determine whether a chemical alternative is safer than the priority
chemical, product, or technology for substitution, independent of the entity performing the
assessment or the alternatives assessment framework being used.
The guidance was developed within the framework of the OECD Ad Hoc Group on the
Substitution of Harmful Chemicals. An initial draft was developed by Abt Associates to
which Ad Hoc Group members contributed text and provided review comments. It is
published under the responsibility of the OECD Chemicals and Biotechnology Committee.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
TABLE OF CONTENTS 5
Table of Contents
Foreword ................................................................................................................................................ 3
1. Background..................................................................................................................................... 7
2. Purpose and Key Principles and Definitions ............................................................................. 11
2.1. Purpose and Scope of this Guidance ........................................................................................... 11
2.2. Key Definitions and Principles ................................................................................................... 12
3. Minimum Criteria and Assessment Practices for Safer Alternatives to Support
Substitution Processes ......................................................................................................................... 15
3.1. Determining the Assessment Scope ............................................................................................ 18
3.2. Comparative Hazard Assessment ............................................................................................... 19
3.3. Comparative Exposure Assessment ............................................................................................ 27
3.4. Integrating Comparative Hazard and Exposure Assessment Results and Assessing Trade-offs
to Select a Safer Alternative .............................................................................................................. 32
3.5. CASE EXAMPLE: Solvent for High-Performing Cleaning Products ........................................ 36
4. Self-Assessment Checklist............................................................................................................ 43
5. Beyond Safer to More Sustainable Substitution ........................................................................ 45
References ............................................................................................................................................ 51
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
1. BACKGROUND 7
1. Background
As the demand for safer chemicals and technologies grows, the field of alternatives
assessment is becoming increasingly important in guiding the transition towards safer, less
toxic alternatives. Throughout Organisation for Economic Co-operation and Development
(OECD) delegations, alternatives assessments are being used to respond to government
regulations, including the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in the European Union (EU) and state-level regulations in the United
States (U.S.), as well as industry, retailer, and consumer demands for products that do not
contain harmful chemicals. The U.S. National Research Council (NRC) defines alternatives
assessment as a “process for identifying and comparing potential chemical and non-
chemical alternatives that could replace chemicals of concern on the basis of their hazards,
comparative exposure, performance, and economic viability” (National Research Council
2014). Alternatives assessment generally takes place after a decision to substitute occurs
and helps guide that process.
The use and practice of alternatives assessment approaches have advanced considerably in
the last decade. Alternatives assessment frameworks, guidance documents, tools, and data
sources have been developed by governments and other organizations to assist practitioners
in selecting safer alternatives. Businesses have successfully replaced chemicals with known
hazards for human health and the environment with lower concern alternatives. Leaders in
industry, academia, and the research community continue to drive innovation towards
chemicals, products, and processes that are “safer by design.” In addition, new research
and professional networks are advancing dialogue on best practices in the field. Initiatives
are underway to document and disseminate these tools and real-world examples of
informed substitution, including the case study repository in the OECD Substitution and
Alternatives Assessment Toolbox (SAAToolbox),1 SUBSPORTplus,2 the European
Chemical Agency’s (ECHA) Repository of Analyses of Alternatives (performed both in
the context of REACH applications for authorization3 and restriction proposals),4 ECHA’s
Substitution to Safer Chemicals website,5 U.S. OSHA’s Transitioning to Safer Chemicals
Toolkit,6 and Ontario’s Toxics Reduction Program - Reference Tool for Assessing Safer
Chemical Alternatives.7 Resources including the Interstate Chemicals Clearinghouse’s
(IC2) Chemical Hazard Assessment Database8 and GreenScreen® Library9 provide access
to completed chemical hazard assessments. Additionally, U.S. Environmental Protection
Agency (EPA)’s Safer Chemical Ingredients List (SCIL)10 provides a list of chemical
ingredients, arranged by functional-use class, that the EPA’s Safer Choice Program has
evaluated and determined to be safer than traditional chemical ingredients.
Despite this progress, important gaps in alternatives assessment approaches remain. These
include limitations and differences in hazard and comparative exposure evaluation
approaches, missing data on chemicals, lack of training and expertise in conducting
alternatives assessments, and inadequate time and/or resources to perform careful,
transparent analyses. An important limitation that can hinder efforts to evaluate and adopt
alternatives for priority chemicals is the lack of consistent criteria for defining “safer.”
Practitioners face challenges on what constitutes “safer” when evaluating alternatives from
both a hazard and exposure perspective – especially in instances of incomplete, uncertain
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
8 1. BACKGROUND
data on human health and environmental endpoints. The workshop of the OECD Ad Hoc
Group on the Substitution of Harmful Chemicals in May 2018 highlighted this complexity,
with members citing the need for guidance for defining safer chemicals and technologies.
A recent report commissioned by the EU, called the “Chemicals Innovation Action
Agenda: Transition to Safer Chemicals and Technologies,” echoed this need for criteria for
safer alternatives, citing it as one of four key priority actions needed to “scale investment
and innovation in safer chemicals and technologies to accelerate their adoption” (Wood
Environment & Infrastructure Solutions 2019). Similarly, the European Green Deal
(European Commission 2019), which includes “eliminating pollution” as one of the key
policy areas for making the EU’s economy sustainable by 2050, calls for improving “rules
on assessment of substances launched on the market,” developing “more sustainable
chemical alternatives,” and protecting “citizens against dangerous chemicals with a new
chemicals strategy for sustainability for a toxic-free environment.”11
This guidance responds to these calls by identifying and outlining key considerations for
the identification and selection of safer alternatives. The remainder of this report is
organized as follows:
Section 2 (Purpose and Key Principles): This section describes the purpose and
scope of this guidance, as well as the key principles on which this guidance is based.
Section 3 (Minimum Criteria and Recommended Assessment Practices for Safer
to Support Substitution Processes): This section outlines minimum requirements
(criteria) and recommended assessment practices for determining whether
alternatives are safer within the context of substitution decisions, as well as
suggested approaches for moving beyond the minimum requirements.
Section 4 (Self-Assessment Checklist): This section provides a self-assessment
checklist of the recommended assessment practices and criteria discussed in
Section 3.
Section 5 (Beyond Safer to More Sustainable Substitution): This section discusses
broader sustainability considerations (beyond chemical safety) that can be used to
select more sustainable chemical alternatives.
Notes
1
http://www.oecdsaatoolbox.org/
2
https://www.subsportplus.eu/
3
https://echa.europa.eu/regulations/reach/authorisation/applications-for-authorisation
4
https://echa.europa.eu/registry-of-restriction-intentions
5
https://echa.europa.eu/substitution-to-safer-chemicals
6
https://www.osha.gov/dsg/safer_chemicals/
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
1. BACKGROUND 9
7
https://www.ontario.ca/document/ontario-toxics-reduction-program-reference-tool-assessing-
safer-chemical-alternatives-0
8
http://theic2.org/hazard-assessment
9
https://store.greenscreenchemicals.org/gs-assessments
10
https://www.epa.gov/saferchoice/safer-ingredients
11
https://ec.europa.eu/commission/presscorner/detail/en/fs_19_6729
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
2. PURPOSE AND KEY PRINCIPLES AND DEFINITIONS 11
This guidance was developed by the OECD Ad Hoc Group on Substitution of Harmful
Chemicals to advance broader agreement on a general approach and criteria for the
selection of safer alternatives, with a focus on chemical substitution. It is intended to
advance a consistent understanding of the minimum requirements needed to determine
whether a chemical alternative is safer than the priority chemical, product, or technology
for substitution, independent of the entity performing the assessment or the alternatives
assessment framework being used. The guidance focuses on minimum assessment criteria
and recommended assessment practices for four core areas of alternatives assessments:
(1) determining the assessment’s scope, (2) comparative hazard assessment, (3)
comparative exposure assessment, and (4) the integration of hazard and exposure results to
select a safer alternative. The guidance also includes recommendations for moving beyond
the minimum criteria and assessment practices. Future activities on substitution at the
OECD could be focused on refining these minimum criteria based on evolving knowledge
and practice, establishing additional criteria that go beyond these minimum requirements,
and examining how these criteria can more effectively influence the design of new
chemicals.
Factors such as performance, cost, and commercial availability are critical assessment
components in determining if an alternative is viable, but they are not the focus of this
guidance. For example, an alternative that does not perform as well, reduces the lifespan of
a product (requiring more material), or requires additional inputs to achieve an acceptable
level of performance may not be considered an acceptable alternative. This guidance also
does not define or establish criteria for the broader suite of sustainability considerations
discussed in Section 5, yet it is meant to complement ongoing efforts within the EU and
other OECD delegations focused on sustainable chemistry.
Additionally, this guidance is focused primarily on single chemical substitutions and not
“functional substitution” where the alternative could include technology, product, or
service changes (Tickner et al., 2015). A functional substitution approach is recommended
in any alternatives assessment not only to broaden the scope of possible alternatives, but
also to identify safer alternatives when drop-in chemical substitutes are not significantly
safer or more sustainable than the original substances of concern. In the case of functional
substitution, use of other tools and criteria to evaluate trade-offs at a mixture, product, or
technology level may be needed. However, in principle, the processes and criteria
contained in this guidance can be useful in evaluating mixture, product, or technology level
assessments.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
12 2. PURPOSE AND KEY PRINCIPLES AND DEFINITIONS
U.S. National Research Council (National Research Council 2014, p. 13) – A safer
alternative represents an option that is less hazardous to humans and the environment than
the existing chemical or chemical process.
California Safer Consumer Products regulation (California Code of Regulations 2013, p.
13) – “Safer alternative” means an alternative that, in comparison with another product
or product manufacturing process, has reduced potential adverse impacts and/or potential
exposures associated with one or more Candidate Chemicals, Chemicals of Concern,
and/or replacement chemicals, whichever is/are applicable.
U.S. Occupational Safety and Health Administration – A safer alternative is an option that
is less hazardous for workers than the existing means of meeting that need.
European Council, Chemical Agents Directive (Council of the European Union 1998) –
The employer must ensure that the risk is eliminated or reduced to a minimum, preferably
by substitution (replacing a hazardous chemical agent with a chemical agent or process
which is not hazardous or less hazardous).
Additional guiding principles for this guidance are the concepts of green and sustainable
chemistry1 and continuous improvement. As noted by the U.S. NRC, in many cases – for
specific chemical functions and applications, safer alternatives may not exist for priority
chemicals and need to be developed through green and sustainable chemistry methods. Less
hazardous substances can be adopted now, where they are available, while efforts to speed
the pace of new, green and sustainable chemistry innovations will provide future
opportunities to move to safer chemistry. The transition to safer chemicals and technologies
is a continuous improvement process. Even though the present guidance focuses on
identifying safer substances in the context of an alternatives assessment, the general
principles remain applicable in the context of developing new, green or sustainable
chemistry solutions.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
2. PURPOSE AND KEY PRINCIPLES AND DEFINITIONS 13
Notes
1
As defined by OECD, sustainable chemistry “encompasses the design, manufacture and use of
efficient, effective, safe and more environmentally benign chemical products and processes.”
http://www.oecd.org/chemicalsafety/risk-management/sustainablechemistry.htm
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT
SUBSTITUTION PROCESSES 15
The minimum criteria, recommended assessment practices, and the practices that go
beyond the minimum criteria proposed in this section are informed by a review of the
literature, including alternatives assessment frameworks, safer product/material
certification processes, and published alternatives assessments. Based on this review, the
process of determining whether a chemical, product, or technology is “safer,” for the
purpose of this guidance, consists of three key steps: comparative hazard assessment,
comparative exposure assessment, and integration of hazard and exposure information (as
shown in Exhibit 2 below). The initial step of scoping and problem formulation is also
covered by this guidance given its importance in identifying and documenting the goals
and principles that will guide the assessment. Because this guidance is designed to
complement any alternatives assessment framework or decision-making context (not serve
as a standalone approach), it does not prescribe a step-wise process a practitioner should
take when performing an alternatives assessment.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
16 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT
SUBSTITUTION PROCESSES
Exhibit 2. Generic Alternatives Assessment Framework Showing What’s Covered
by this Guidance
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT
SUBSTITUTION PROCESSES 17
Minimum requirements should be seen as the baseline level in a spectrum or hierarchy of
an increasingly comprehensive set of criteria and assessment practices that may ultimately
be needed to support broad stakeholder confidence that a given alternative is safer. This
minimum set of criteria and practices should not preclude assessors from including more
comprehensive approaches in their alternatives assessments. Assessments that go beyond
these minimum requirements will reduce the likelihood of a substitution decision leading
to unintended consequences to the environment, workers, and the public more broadly.
Specific assessment contexts, availability of resources, and expertise will dictate the ability
to address additional assessment criteria. In addition, data gaps remain a significant
challenge in the ability to conduct assessments that are more comprehensive. As science
advances, certain criteria, endpoints, or practices may become more generally used and the
minimum requirements may change. An extension in the minimum criteria should balance
the need to make timely decisions in the face of imperfect information with the benefit of
that extra knowledge in improving decisions. To support more comprehensive approaches,
criteria and recommended practices for going beyond the minimum have been suggested
as a supplement to minimum requirements.
Exhibit 3. Spectrum of Safer Criteria for the Selection of Alternatives to Priority Substances
In cases where a safer alternative cannot be identified for a particular chemical function or
application, these minimum criteria as well as criteria for going beyond the minimum can
be useful in helping to direct the development of green chemistry solutions. Traditionally,
many health and safety impacts are not considered in the design-stage of new chemistry
development/innovation. Use of these minimum requirements for evaluating and
comparing hazard and exposure potential can help to advance aligned efforts focused on
safer or green chemistry.
It should be noted that cases could arise where all alternatives present intrinsic hazard
concerns, and while awaiting green chemistry solutions, assessors could choose to use
exposure information (e.g., whether the alternatives are hazardous via dermal, inhalation,
and/or oral routes, and the likelihood of exposure via each route) to identify the relatively
safer option. However, for the purposes of this guidance, these alternatives should only be
considered “safer” from a relative perspective and green chemistry solutions should be
pursued for a more ideal solution.
Minimum criteria for establishing the scope of the assessment, comparative hazard
assessment, comparative exposure assessment, and the integration of both assessments to
make a safer alternative determination are outlined below in Sections 3.1-3.4, and are key
considerations for helping assessors move beyond the minimum criteria. At the end of
Section 3 a case example of a hypothetical solvent manufacturer seeking to replace a
solvent with potential concerns for several human health endpoints with a safer alternative
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
18 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT
SUBSTITUTION PROCESSES
for use in high-performing cleaning products is included to demonstrate how these
minimum requirements and considerations for moving beyond the minimum can be applied
in practice. This solvent example is also referenced throughout Section 3 to illustrate how
the criteria apply to the components of an alternatives assessment that are within the scope
of this Guidance. It does not illustrate how to perform other elements that make up an
alternatives assessment, such as performance, technical feasibility, or economic viability
Scoping is an important initial step of an alternatives assessment and sets the stage for
subsequent steps. This step is important because it not only defines and documents the
goals and principles that will guide the assessment, it can also help to screen out alternatives
that are clearly infeasible or unacceptable from a functional, legal, economic, market, or
corporate policy standpoint, thus saving time and resources in the assessment by focusing
on a smaller range of viable options. The performance needs for alternatives are often
defined during scoping. The following recommended assessment practices should be
included in the scoping step to support a safer alternative determination:
A. Include appropriate stakeholder input in determining the scope of the assessment;
and
B. Clearly document the goals, principles, and decision rules used.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT
SUBSTITUTION PROCESSES 19
be included from the scoping step through the review of the entire assessment in order to
provide input into which alternatives are safer and feasible.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
20 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT
SUBSTITUTION PROCESSES
B. Select endpoints and apply criteria/thresholds using the Globally Harmonized
System (GHS) of Classification and Labelling of Chemicals;
C. Establish transparent decision rules to organize and prioritize information; and
D. Consider data gaps and uncertainty.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES 21
Montreal Protocol List of Controlled Ozone-depleting Substances Authorities European Union Priority List of Suspected Endocrine Disruptors
Stockholm Convention List of Persistent Organic Pollutants (POPs) ECHA Information on chemicals” Webpages: Hazardous properties and regulatory status of substances
in several pieces of EU legislation, including REACH, CLP, BPR, etc.
List of Restrictions under REACH
List of Harmonized Classifications in Annex VI of CLP
C&L Inventory: Contains basic classification and labelling information on notified and registered
substances received from manufacturers and importers
Public Activities Coordination Tool (PACT): Substances considered for further assessment –
RMOA and informal hazard assessment (PBT/vPvB and endocrine disruptors)
REACH: Annex III Inventory
World Health Organization’s International List of Classified Carcinogens OECD eChemPortal: Information on the properties of chemicals
Agency for Research on Cancer
Canada Toxic Substances List and the Virtual Elimination List NGOs European RISCTOX: A database on toxic and hazardous substances
Environmental
Bureau
European Chemicals Agency (ECHA) Candidate List of Substances of Very High Concern for European Trade Trade Union Priority List for REACH Authorisation
Authorization Unon Institute
Substances classified as substances with carcinogenic,
mutagenic or reproductive toxicity properties (CMR) 1a or 1b under
Annex VI of CLP
U.S. Environmental Protection Agency Toxics Release Inventory’s Persistent, Bioaccumulative and AOEC List of Respiratory Sensitization Substances
Toxic (PBT) Chemicals List and PBT Chemicals under the Toxic
Substances Control Act (TSCA) Section 6(h)
U.S. National Toxicology Program Report on Carcinogens SINLIST The “Substitute it Now” list from environmental organisations
State of California Proposition 65 List TEDX* List of potential endocrine disruptors
Industry Textiles ZDHC Manufacturing Restricted Substance List
Sectors American Apparel and Footware Association’s Restricted Substance List
Automotive Global Automotive Stakeholders Group’s (GASG’s) Global Automotive Declarable Substance List
(GADSL)
Furniture Business and Institutional Furniture Manufacturers’ (BIFMA’s) ANSI/BIFMA e3-2012 Furniture
Sustainability Standard Annex B – Chemicals of Concern List
Grandjean and *List of 201 chemicals known to be neurotoxic in humans
Landrigan
*From 2003 to 2019, TEDX produced and shared scientific evidence of endocrine disruption. The TEDX list was last updated in
September 2018; the website will remain available until September 2022.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
22 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES 23
MINIMUM CRITERIA: Evaluate endpoints shown below, using GHS criteria to ascribe MOVING BEYOND THE MINIMUM: Consider additional GHS and other priority endpoints
level of concern/classification for a given hazard.1 based on stakeholder engagement, expertise, and data availability.
Human Health Hazards Environmental Hazards Physical Hazards Human Health Hazards Environmental Hazards Physical Hazards
Carcinogenicity Acute aquatic toxicity Flammability Neurotoxicity Mobility Corrosivity
Germ cell mutagenicity Chronic aquatic toxicity Specific target organ Wildlife toxicity* Explosivity
Reproductive toxicity2 Bioaccumulation toxicity – single exposure Eutrophication* Oxidizing properties
Acute toxicity potential Skin corrosion/irritation Greenhouse gas Pyrophoric properties
Specific target organ Biodegradability4 Serious eye damage/eye emissions, ozone Self-reactivity
toxicity – repeated irritation depletion potential,
Self-heating properties
exposure3 Respiratory or skin waste generation, and
other sustainability Emission of flammable
Notes: sensitization
endpoints** gases in contact with
1An assessor may need to go beyond traditional sources and types of data, such as in- Aspiration hazard water
vitro and in-vivo testing compiled in government databases or scientific journals to using Endocrine disruption* Other physical
read across, structure activity, and high-throughput data to inform a weight-of-evidence- hazards: aerosols,
based decision. gases under pressure,
2Considers the potential for developmental toxicity
organic peroxides,
3Referred to as Repeated Dose Toxicity in this paper
ergonomics, vibration,
4Referred to as Persistence in this paper
noise
Please see UNECE, 2019 for GHS classification criteria for the above endpoints. *Not included in GHS criteria
**Please see Section 5 for more discussion on sustainability considerations.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
24 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES 25
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
26 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
Exhibit 8. Data Source Hierarchy for Chemical Hazard Information
Estimated data from a model (assuming the chemical is within the model’s
applicability domain)
A study that does not follow a test guideline, but provides sufficient documentation of
methods and results
A study evaluating a route of exposure other than oral, dermal or inhalation
(e.g., intraperitoneal injections)
Exhibit 9 outlines a range of strategies and their pros/cons for addressing uncertainty during a
comparative hazard assessment, as outlined in the U.S. NRC framework (National Research
Council 2014). None of the presented strategies are considered a best practice. This guidance
recommends that as a minimum assessment practice, practitioners select and follow a specific
strategy that best meets the scope and goals of the assessment, and then transparently document
the data gaps, the strategy and decision-making approach used to resolve them. Data for
alternatives for which hazards are not fully characterized should be regularly reviewed to
identify any emerging information. To better characterize a given hazard, an assessor can use
information beyond traditional sources and types of data, such as in-vitro and in-vivo testing
compiled in government databases or scientific journals. Such information can be drawn from
read across, structure activity and high-throughput data, and can inform a weight-of-evidence-
based decision for a given endpoint or an alternative. In the case of the hypothetical solvent,
data gaps and endpoint classifications based on lower confidence data could be clearly ascribed
as shown in the case study example below. Data gaps and hazard levels classified based on low
confidence are important considerations during the navigation of trade-offs, thus transparency
is key for such issues to be considered in final decisions about which alternative is safer.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES 27
Exhibit 9. Strategies for Considering Uncertainties in the Hazard Data
RECOMMENDED ASSESSMENT PRACTICES: At a minimum, use one or more of the practices listed below to address
data gaps and provide explicit documentation on the practice/method used.
Tier 1 Practices: Lower Level of Expertise and Resources
Required
Provide descriptions of the confidence level in the data Pros: Assists with transparency and is useful when
associated with a specific hazard classification: Considers the considering trade-offs across the full assessment
sources and quality of the data used for characterizing the Cons: Requires professional judgement. Not all assessors will
hazard level for a given endpoint and assigns a corresponding describe confidence levels in the same set of data the same
confidence level (e.g., high, moderate, or low confidence). way.
Use external expert knowledge: An expert review panel can Pros: Deliberation among experts can reveal useful insights
enhance understanding whether uncertainty is problematic and about specific data uncertainties.
can advise on the best course of action given the potential Cons: May be time consuming to convene and there may no
consequences of data being wrong. clear answer or course of action.
Exclude alternatives with missing data: Only alternatives with Pros: Evidence of safety is necessary to be considered a
data for priority endpoints are considered, and alternatives with safer alternative.
unknown toxicity for critical hazard endpoints are excluded. Cons: May discriminate against newer safer chemicals that
have less available data.
Penalize data gaps: Uncertainty for a given hazard endpoint or Pros: Evidence of safety is necessary to be considered a
is penalized/weighted less favorably in the overall evaluation. safer alternative.
Cons: May discriminate against newer safer chemicals that
have less available data.
Remain neutral about uncertainty and missing data: In this Pros: Avoids prematurely removing potentially safer
strategy, the presence of uncertainty and missing data are alternatives from the evaluation process – important if other
simply noted, but no alternative is excluded or penalized as a attributes such as economic and technical feasibility also need
result. to be considered.
Cons: May result in regrettable substitution since alternatives
with missing data may appear preferable even if they are not.
Requires near-term testing and monitoring to protect against a
regrettable substitution.
Tier 2 Practices: Higher Level of Expertise and Resources
Required
Use additional tools: Use tools such as structure-activity Pros: Structurally similar chemicals for which data are
relationships models and read-across approaches to fill data available are used as surrogates to fill data gaps.
gaps. Cons: Requires additional expertise than many assessors
may not have.
Use quantitative uncertainty analysis: Uncertainty in toxicity Pros: Easier to see that one alternative is preferable to
values, for example; could be expressed quantitatively or another if shown in a clear illustration.
illustrated graphically – expressed as a probability distribution, Cons: Requires additional expertise than many assessors
among other options. may not have.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
28 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
properties will impact a determination about which alternative is safer. A qualitative exposure
assessment can help determine whether properties of the substance or its use characteristics can
increase or decrease specific hazards. Chemicals and their alternatives can then be compared
across hazards using the potential for exposure.
Exposure assessments that are conducted as part of an alternatives assessment are comparative
and consider the potential for exposure based on inherent or intrinsic chemical and physical
properties as well as expected use scenarios and do not, necessarily, attempt to quantify those
exposures, except where necessary to understand potential exposure trade-offs. A quantitative
assessment is typically used in conducting risk assessments. The U.S. National Research
Council’s (NRC) alternatives assessment framework established the use of the term intrinsic
potential for exposure because it focuses on the use of physical-chemical properties and
qualitative exposure considerations such as use conditions and plausible routes of exposure
(National Research Council 2014). This guidance lays out the steps by which a qualitative
exposure assessment should be carried out by identifying exposure pathways and comparing
exposure potential.
The main components for a qualitative exposure assessment are:
A. Identifying exposure pathways and reasonably foreseeable exposure scenarios
throughout the lifecycle; and
B. Comparing exposure potential
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES 29
Exhibit 10. Exposure Pathways and Reasonable Use Scenarios
Step 1: Based on the scope of the assessment, identify the life cycle stage(s) where concerns for exposure trade-offs may
occur. Examples include:
Chemical manufacturing
Product manufacturing
Product use
End of life
Reuse in a recycled form
Step 2: Within each life cycle stage, identify potential routes of exposure and receptors given conditions of use and conditions
of potential misuse of the substance. This could be accomplished by:
Engagement with stakeholders (relevant worker, consumer or environmental stakeholders)
Review of the literature
Use of conceptual exposure maps (See Greggs et al. 2019 for examples)
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
30 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
Evaluating physical-chemical properties of each chemical under consideration is a primary
method in alternatives assessment to help assessors compare exposure potential, including
environmental fate. The results of this comparison may pave a clear path to identifying a safer
alternative and eliminating the need to continue further with the qualitative exposure
assessment. Some alternatives may have a significantly lower log Kow or higher water solubility
compared to the priority chemical, creating differences in bioavailability and increased
exposure potential to ecological receptors. Critical physical-chemical properties used to
estimate and compare exposure potential for both human and ecological receptors are detailed
in Greggs et al. 2019 as well as the 2014 US National Research Council’s framework
(Chapter 5). Because of the general availability of physical-chemical properties, this
information can also be used to identify routes of exposure to potential alternatives as well as
reasonably foreseeable exposure pathways given conditions for how the chemical will be used
and potentially misused.
In cases where physical-chemical properties are unavailable, assessors can use tools such as
EPI Suite, a U.S. EPA program that estimates physical-chemical properties. The exposure
scenario and route of exposure will most often indicate which of these properties will be
relevant to evaluating whether an alternative is likely to lead to substantially more, substantially
less, or equivalent exposures by each route and scenario.
If there is a mix of higher and lower exposure potential predictions from evaluation of physical-
chemical properties, various other tools could be used in conjunction with the hazard
conclusions to identify a safer alternative, such as: direct and indirect exposure measurements;
experimental values for transfer rates, dermal uptake, and bioavailability; questionnaires; and
observational data. When necessary, modelling programs can take much of this information as
inputs to help estimate exposures. Some models can be used to compare relative exposures
based on physical-chemical properties alone while others require additional input parameters.
Exposure modelling is beyond the scope of this OECD guidance document. Assessors who
wish to conduct exposure modelling could consult established exposure modelling resources
such as ECTOC TRA, EUSE or ConsExpo. It is important that an assessor consider exposure
potential after considering the hazard conclusions, and not in isolation. Comparing exposure
potential can also include consideration and comparison of functional equivalent
concentrations. Considering the mass, volume, or concentration of an alternative chemical
needed to achieve the same functional performance in a specific application as the substance
of concern can impact exposure and is another factor to consider when determining if an
alternative is safer, to avoid potential negative trade-offs, and is particularly important for
chemicals with different hazard concerns. For example, a specific solvent in a cleaning
formulation may be of concern for carcinogenicity but a potential alternative that must be used
in higher quantities to achieve the same level of performance may be ecotoxic. Understanding
this trade-off may lead to deprioritizing an alternative or to consideration of how to optimize
its performance to reduce the amount required.
Exhibit 12 summarizes the minimum criteria and assessment practices to qualitatively estimate
exposure potential to assist with making a safer alternative determination.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES 31
Exhibit 12. Using Physical-Chemical Properties and/or Exposure Models to Compare Exposure Data for Alternatives
MINIMUM CRITERIA AND RECOMMENDED ASSESSMENT PRACTICE MOVING BEYOND THE MINIMUM
Step 1: Exclude routes of exposure that are unlikely based on measured If uncertainty or conflicting information prevents the identification of a safer alternative, collect and use exposure information to better
exposure data or physical-chemical properties such as: understand use patterns and exposure pathways to assess trade-offs. Commonly used tools and references include:
• physical state The ConsExpo5 modelling tool enables the estimation and assessment of exposure to substances from consumer products such as
• vapour pressure paint, cleaning agents, and personal care products.
• molecular weight “Descriptions of Existing Models and Tools Used for Exposure Assessment, Results of OECD Survey” includes a table of available
• water solubility exposure models with descriptions and links for each tool.
• log kow ECHA’s Guidance on Information Requirements and Chemical Safety Assessment, Chapter R.15: Occupational exposure assessment6
• boiling point provides a description of occupational exposure models.
• melting point ECHA’s Guidance on Information Requirements and Chemical Safety Assessment, Chapter R.15: Consumer exposure assessment7
• Henry Law’s Coefficient provides a description of consumer exposure models.
• particle size ECHA’s Guidance on Information Requirements and Chemical Safety Assessment, Chapter R.16: Environmental exposure
assessment8 provides a description of several environmental exposure tools.
Step 2: Qualitatively compare the above exposure data or physical-chemical ECHA’s Guidance on Information Requirements and Chemical Safety Assessment, Chapter R.18: Exposure scenario building and
properties for the relevant exposure routes to identify if the alternative is
environmental release estimation for the waste life stage9 provides a description of tools to estimate exposure from disposal.
likely to result in greater, equivocal, or less exposure.
EPA’s ExpoBox is a compendium of assessment tools that contains links to guidance documents, databases, models, reference
materials, and other resources.
The European System for the Evaluation of Chemicals (EUSES)10 is a tool to help carry out rapid and efficient assessments of the
general risks posed by chemical substances.
The European Centre for Ecotoxicology and Toxicology of Chemical’s (ECETOC)11 Targeted Risk Assessment (TRA) tool helps to
calculate the risk of exposure from chemicals to workers, consumers, and the environment.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
32 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
3.4. Integrating Comparative Hazard and Exposure Assessment Results and Assessing
Trade-offs to Select a Safer Alternative
Making a safer alternative determination requires integrating the results from the hazard and
qualitative exposure assessments to evaluate trade-offs and consider any lingering
uncertainties. A broadly agreed-upon approach for integrating this type of information to
support decision-making regarding alternatives does not exist, but there is agreement on the
need to be transparent in the assessment process and to engage stakeholders. Stakeholder
engagement is a key component in several stages of the alternatives assessment process.
Bringing stakeholders together to consider the trade-offs when integrating hazard and
comparative exposure assessment findings is a value-added process for decision-making
regarding a preferred alternative(s) given that successful implementation of an alternative
depends upon acceptance of the outcome of a safer alternative designation.
Two main components are considered in this step:
A. Integrate hazard and exposure assessment results; and
B. Consider trade-offs and make a decision regarding a safer alternative.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES 33
about the shortcomings of specific alternatives to guide innovation needs. In the solvent
example (See Case Example at the end of Section 3), the company used a weighted scoring of
endpoints strategy in their considerations of trade-offs and weighted those endpoints
considered “minimum hazard criteria” (Exhibit 6) more heavily in the trade-off assessment.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
34 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES
Exhibit 13. Integrating Hazard and Exposure Assessment Results Minimum Assessment Practices
RECOMMENDED ASSESSMENT PRACTICES: Transparently document strategies used to integrate hazard and exposure results. Use
one or more of the strategies listed below:
Comparison Matrices: For hazard endpoints that are not classified as “low,” Pros: Useful to have an integrated visual display of all of the hazard and exposure
integrate exposure potential for each alternative being considered as less than (-), assessment findings. These heatmaps/matrices are useful especially when the
equivalent (0) or greater than (+) the chemical being replaced. The resulting heat assessor is not making a decision (e.g., assessment is generated by government
map can be visually used to integrate the hazard and exposure information. agencies or NGOs) and supports decision-making by other entities.
Cons: When exposure potential is not equivalent, it will be difficult to use these
comparison matrices alone to adjust the hazard assessment findings in light of the
exposure assessment results.
Adjusting for Exposure Potential: Focuses on the integration of exposure potential Pros: Supports further weighting of specific endpoints when considering trade-offs
with individual hazard endpoints. This weighting can upgrade or downgrade the (Exhibit 14).
severity of a particular hazard (category) based on the potential for exposure Cons: There may be toxicological knowledge and nuances to consider regarding
information. how exposure potential modifies the hazard assessment results.
Narrative Exposure Summary: Focuses on a narrative summary of potential Pros: Simple narrative phases are easy to develop and understand.
exposure concerns for an alternative to allow the assessor to understand trade-offs. Cons: May not help adequately discern between alternatives.
Descriptive Exposure Phrases: Similar to hazard phrases (such as high, medium, Pros: A simple characterization that can be used by multiple assessors.
and low), such phrases would help with hazard assessment results provide an Cons: May not help adequately discern between alternatives.
indication of how an alternative might increase or decrease exposure compared to
alternatives.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES 35
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
36 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
3.5. CASE EXAMPLE: Solvent for High-Performing Cleaning Products
To illustrate application of the minimum criteria for a safer alternative determination, this
section uses the example of a hypothetical solvent manufacturer who currently uses a solvent
that has no experimental data for carcinogenicity, though carcinogenicity models predict with
good reliability that this solvent has the potential to cause cancer. Experimental data for this
solvent also suggest that specific organ toxicity from repeated inhalation exposures and skin
irritation are likely. The manufacturer offers this solvent to formulators of high-performing
cleaning products who wish to market to retailers with a preference for safer products. The
manufacturer would like to replace the solvent with one that meets its clients’ needs.
Performance requirements for this market are rigorous, so when used in targeted formulations,
the solvent must perform as well as solvents now being used in market-leading products.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES 37
“dangerous for the environment” hazard ranking methods outlined in the Guide on
Sustainable Chemicals, developed by the German Environment Agency. Given that
harmonized GHS classifications were not available for all endpoints for all alternatives,
the company conducted a literature review and used GHS criteria to help structure and
categorize the hazard levels.
Use transparent decision rules and consider data gaps and uncertainties – The firm
adopted the data hierarchy outlined in Exhibit 8 to address data gaps and uncertainty levels
in the summary heat map matrix (shown below) and adopted the minimum decision rule
requirements for considering an alternative as safer. As a consequence, alternatives A and
D were excluded from consideration because of concern for carcinogenicity, reproductive
toxicity, and developmental toxicity.
Exhibit 15. Recommended Assessment Practice to Identify Safer Alternatives for the Chemical Targeted
for Substitution Using the recommended assessment practices described in Exhibit 7, Alternatives A and D
were removed from consideration due to high hazards associated with reproductive and developmental
toxicity, respectively (listed as “R” on authoritative CMR lists), and moderate concern for carcinogenicity for
Alternative A.
Physical
Human Health Hazards Environmental Hazards
Hazards
Toxicity, Repeated
Skin Sensitization#
Bioaccumulation
Carcinogenicity*
Biodegradation*
Chronic Aquatic
Developmental
Acute Toxicity*
Specific Organ
Acute Aquatic
Skin Irritation#
Mutagenicity*
Flammability*
Reproductive
Exposure*
Germ Cell
Potential*
Toxicity *
Toxicity*
Toxicity*
Toxicity*
Rapid
Chemical targeted
M L L L L H L H L L L M M
for substitution
Alternative A M L H L L DG L L M H LL L L
Alternative B L L M M L DG L L M M L L L
Alternative C L L L L L L L L M M L VL L
Alternative D L L M H L M L L M M L L L
*Minimum criteria for a safer alternative determination; #Beyond the minimum criteria; L=low hazard level; M=moderate hazard level;
H= High hazard level; DG=data gap; Italicized hazard rankings reflect lower levels of confidence in the data.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
38 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
whether the exposure potential of a given alternative was greater than (+), equivalent to (0)
or less than (-) that of the chemical targeted for substitution. The vapour pressure for
Alternative B was greater than the chemical targeted for substitution, suggesting higher
potential for inhalation exposure to workers during manufacturing. Alternative C had a
slightly lower water solubility than the chemical targeted for substitution, and experimental
data indicated the chemical readily biodegraded within 10 days, indicating lower exposure
potential in the aquatic environment.
Exhibit 16. Comparison of Exposure Potential for the Relevant Human Health and Ecological Exposure Routes
Using the identified exposure potential for the chemical targeted for substitution as a baseline, the company relied on
physical-chemical properties and available data to determine Alternative B has greater potential for inhalation exposure
to workers during manufacturing and consumers during product use. Alternative C has lower potential for exposure to
aquatic organisms and leaching through soil.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES 39
For comparison and to check their results, the company also used a weighted scoring of
endpoints approach using the same information, as depicted in Exhibit 18 below. To consider
trade-offs under this approach, the manufacturer assigned human health and environmental
hazard endpoints a numerical score of 1 for low hazard, 2 for moderate hazard, 3 for h igh
hazard, and assigned a score of 4 for endpoints with data gaps. Hazard endpoints considered
minimum criteria contributed more to the overall score of each alternative; the hazard score for
these endpoints were multiplied by two. For each chemical evaluated, the hazard and exposure
scores were added together to make a hazard and exposure total score. The total scores were
then compared to one another to make a selection. Using this approach, Alternative C has the
lowest score and was recommended as the safer alternative.
Given the results of both the narrative exposure summary (described above based on the
information in Exhibit 17) and the weighted scoring of endpoints (Exhibit 18, the solvent
manufacturer made a safer alternative determination for Alternative C based on the reduced
likelihood for exposure to aquatic systems despite there being moderate concern for aquatic
toxicity.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
40 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES
Exhibit 17. Comparison Matrix to Integrate Hazard and Exposure Assessment Results For endpoints with moderate hazard (yellow), high hazard
(red), or a data gap (grey), the company considered and compared the exposure potential for the alternative with the chemical targeted for substitution.
Physical
Human Health Hazards Environmental Hazards
Hazards
Skin Sensitization#
Toxicity, Repeated
Bioaccumulation
Carcinogenicity*
Biodegradation*
Chronic Aquatic
Acute Toxicity*
Developmental
Specific Organ
Chemical
Skin Irritation#
Acute Aquatic
Flammability*
Mutagenicity*
Reproductive
Exposure*
Germ Cell
Potential*
Toxicity *
Toxicity*
Toxicity*
Toxicity*
Rapid
Chemical targeted for
M L L L L H L H L L L M M
substitution
Alternative B hazard
L L M M L DG L L M M L L L
considerations
Alternative B ≈oral ≈oral ≈oral
exposure ≈dermal ≈dermal ≈dermal ≈water ≈water
considerations >inhalation >inhalation >inhalation
Alternative C hazard
L L L L L L L L M M L VL L
considerations
Alternative C
exposure <water <water
considerations
*Minimum criteria for a safer alternative determination; #Beyond the minimum criteria; L=low hazard level; M=moderate hazard level; H= High hazard level; DG=data gap;
≈ =equivalent exposure potential to the chemical targeted for substitution; > =greater exposure potential than the chemical targeted for substitution; < =lower exposure
potential to the chemical targeted for substitution; Italicized hazard rankings reflect lower levels of confidence in the data.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
3. MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION PROCESSES 41
Exhibit 18. Weighted Scoring of Endpoints Approach to Select a Safer Alternative The minimum criteria for hazard endpoints were weighed twice
as much (multiplied by 2) towards the overall numerical score. Each endpoint’s score for hazard and exposure is included in the table. This approach
suggests Alternative C is the safer alternative based on it having the lowest score.
Physical
Human Health Hazards Environmental Hazards
Hazards
Skin Sensitization#
Toxicity, Repeated
Hazard &
Bioaccumulation
Carcinogenicity*
Biodegradation*
Chronic Aquatic
Acute Toxicity*
Developmental
Specific Organ
Sum Exposure
Skin Irritation#
Acute Aquatic
Flammability*
Mutagenicity*
Reproductive
Total
Exposure*
Germ Cell
Potential*
Toxicity*
Toxicity*
Toxicity*
Toxicity*
Rapid
Chemical targeted for
substitution M (2) L (1) L (1) L (1) L (1) H (3) L (1) H (3) L (1) L (1) L (1) M (2) M (2) 36
Hazard considerations
36
Chemical targeted for
substitution 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Exposure considerations
Alternative B
L (1) L (1) M (2) M (2) L (1) DG (4) L (1) L (1) M (2) M (2) L (1) L (1) L (1) 38
Hazard considerations
40
Alternative B
0 0 +1 +1 0 0 0 0 0 0 0 0 0 +2
Exposure considerations
Alternative C
L (1) L (1) L (1) L (1) L (1) L (1) L (1) L (1) M (2) M (2) L (1) VL (1) L (1) 28
Hazard considerations
26
Alternative C
0 0 0 0 0 0 0 0 -1 -1 0 0 0 -2
Exposure considerations
*Minimum criteria for a safer alternative determination; #Beyond the minimum criteria; L=low hazard level received 1 point per endpoint; M=moderate hazard level received 2
points per endpoint; H= High hazard level received 3 points per endpoint; DG=data gap received 4 points per endpoint; If exposure for an alternative was less than the chemical
targeted for substitution, the alternative chemical received a -1 score for the relevant endpoints. If exposure for an alternative was greater than the chemical targeted for
substitution, the alternative chemical received a +1 score for the relevant endpoints. If exposure for an alternative was equivalent to the chemical targeted for substitution, the
alternative chemical received a 0 score for the relevant endpoints.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES © OECD 2021
42 3 MINIMUM CRITERIA AND ASSESSMENT PRACTICES FOR SAFER ALTERNATIVES TO SUPPORT SUBSTITUTION
PROCESSES
Notes
1
See for example: Natural Resources Defense Council (2017), Protection of the most Vulnerable: A
Discussion Draft, https:/www.nrdc.org/sites/default/files/toxic-chemicals-vulnerable-populations-report.pdf
2
The Commons Principles are a set of principles to guide alternatives assessment practice, developed by
a group of academic, NGO, business, and government professionals.
https://www.bizngo.org/resources/entry/commons-principles-for-alternatives-assessment
3
http://www.oecdsaatoolbox.org/Home/Tools
4
https://p2oasys.turi.org/
5
https://www.rivm.nl/en/consexpo
6
ECHA’s Guidance on Information Requirements and Chemical Safety Assessment ChapterR.14: Occupational
exposure assessment
7
ECHA’s Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer
exposure assessment
8
ECHA’s Guidance on information requirements and Chemical Safety Assessment Chapter R.16:
Environmental exposure assessment
9
ECHA’s Guidance on information requirements and chemical safety assessment Chapter R.18:
Exposure scenario building and environmental release estimation for the waste life stage
10
https://ec.europa.eu/jrc/en/scientific-tool/european-union-system-evaluation-substances
11
http://www.ecetoc.org/tools/targeted-risk-assessment-tra/
12
Given the potential for inhalation and dermal exposure, a practitioner is encouraged to consider additional
endpoints beyond those identified in this case study, such as specific target organ toxicity- single exposure,
neurotoxicity, eye irritation, respiratory sensitization, aspiration hazard, and endocrine disruption, as
applicable to the scope of the assessment.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
4. SELF-ASSESSMENT CHECKLIST 43
4. Self-Assessment Checklist
Exhibit 19, a self-assessment checklist, summarizes the minimum criteria and recommended
assessment practices discussed in Section 3. This check list does not include recommendations
that go beyond the minimum criteria as outlined in Section 3. However, the assessor is strongly
encouraged to consider these additional recommendations on hazard and exposure, as well as
the broader sustainability endpoints in Section 5, to avoid a regrettable substitution
Select endpoints and apply Evaluate the “Minimum Criteria” endpoints shown in Exhibit 6, using GHS criteria to
criteria/thresholds ascribe level of concern/classification for a given hazard.
Establish transparent decision Exclude alternatives that are classified as “High” concern based on GHS criteria for:
rules to organize and prioritize Carcinogenicity
information Germ Cell Mutagenicity
Reproductive/Developmental Toxicity
PBT
vPvB
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
44 4. SELF-ASSESSMENT CHECKLIST
Consider trade-offs and make a Engage stakeholders and document the rationale for a decision including the strategies
decision regarding a safer and tools used to address trade-offs and to assist the decision-making process. At a
alternative minimum, use of one or more of the strategies listed below, and described in Exhibit
14, to address trade-offs in the integration of hazard and exposure data to make a
safer alternative determination. In some cases, this step may determine that a safer
alternative is not currently available, and research and de novo design are needed to
create one.
Comparative evaluation matrices
Eliminate the “high” rating
Strict ordering of endpoints
Equal weighting of endpoints
Rule-based ranking
Weighted scoring of endpoints
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
5. BEYOND SAFER TO MORE SUSTAINABLE SUBSTITUTION 45
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
46 5. BEYOND SAFER TO MORE SUSTAINABLE SUBSTITUTION
Source: UNEP/SETAC. Life Cycle Management: A Business Guide to Sustainability. Paris, 2007
For example, an alternative may be identified as safer based on the steps identified in Section
3 of this report, but may significantly increase energy use across a process or product lifecycle
or decrease recyclability. These attributes may make the alternative a non-preferable option. It
is important to identify potential sustainability trade-offs associated with alternatives during
the scoping phase of the assessment and then evaluate and seek to resolve them. Identifying
process improvements to reduce embedded energy of an alternative, exploring design
modifications to enhance circularity, or making a decision to develop new alternatives while
ensuring adequate management of the existing option are possible solutions. To build upon the
case example presented in Section 3, evaluating potential impacts of concern along the life
cycle and end-of life (recycling) (identified in the scoping phase of the assessment and noted
in Exhibit 20) for each alternative could lead to improved decision-making that minimizes
potential trade-offs between toxicity and other sustainability attributes. For example,
Alternative B is bio-based, but its feedstock chemical is sourced from a non-sustainably-grown
source and uses an energy intensive process to convert to the final solvent. Alternative C is
petrochemical-based and requires high processing energy to remove problematic residuals.
Since both alternatives require energy intensive processes, but Alternative B’s source material
is determined to be less sustainable, the assessor decides Alternative C remains the preferred
alternative from both a hazard and sustainability perspective. The assessor may prioritize green
chemistry solutions to improve separation and refinement processes to reduce the processing
energy for Alternative C. In another example, Chemical D is hazardous and could be replaced
by chemical E in mixture formulations eliminating hazard and risk. Both chemicals are critical
raw materials and Chemical E cannot be recycled and when mined or manufactured induces
the production of chemicals with the same properties and as chemical D, which then need to
be disposed. In such a case, a more in-depth assessment of the trade-offs related to hazard, risk,
possible risk management measures that can be put in place and broader sustainability aspects
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
5. BEYOND SAFER TO MORE SUSTAINABLE SUBSTITUTION 47
would need to be performed for the assessor to make an informed choice on the preferred
alternative. In parallel, efforts should be pursued to find or develop alternatives which are
inherently safer and more sustainable along their life-cycle and end-of-life.
Considering the implication of a chemical substitution throughout the lifecycle can involve
approaches ranging from quantitative life-cycle assessments (LCAs), such as those that follow
well-defined ISO 14040 methodology, to less resource-intensive “life-cycle thinking,” which
can qualitatively evaluate impacts across life-cycle stages. While chemical alternatives
assessments are not instruments for conducting full LCAs, many frameworks incorporate life-
cycle thinking. For example, Jacobs et al. (2016) found that 18 of 20 reviewed frameworks
included life-cycle thinking. The authors found that while most frameworks consider life-cycle
attributes in the context of hazard, exposure, economic, or technical feasibility assessments,
some frameworks (e.g., the German Guide on Sustainable Chemicals and the U.S. NRC
framework) include it as a discrete process component to provide information for identifying
potential unintended consequences or discerning between alternatives (Jacobs et al. 2016).
Additionally, some regulatory alternatives assessment requirements, such as alternative
analyses conducted under California’s Safer Consumer Products regulation, require the
inclusion of relevant life cycle segments and impacts. Moreover, life-cycle practices continue
to evolve; for example, Fantke et al. (2020) describe new research on how to combine LCAs
and chemical safety considerations.
The sustainability of a potential substitute is also dependent on the economic viability of
alternatives. Jacobs’ et al. (2016) review of 20 alternatives assessment frameworks found that
all included some form of economic assessment. Across the reviewed frameworks, economic
measures ranged from commercial availability, direct costs (such as manufacturing and
transition costs), and internal costs (such as insurance and regulatory compliance costs), to
external costs and benefits (such as environmental impact costs and worker morale) and long-
term costs (such as economies of scale). While the breadth and depth of economic
considerations may vary according to what is possible or desirable for a given alternatives
assessment, making an informed substitution relies on understanding the substitution’s
economic impacts across the chemical’s lifecycle.
Exhibit 21 below includes additional resources that may be useful in identifying, considering,
and evaluating broader sustainability impacts in chemical substitution decision-making. While
these impacts are not the focus of this guidance, they are important to consider in minimizing
potential trade-offs of substitution decisions and should be considered in the context of
transitioning to safer alternatives.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
48 5. BEYOND SAFER TO MORE SUSTAINABLE SUBSTITUTION
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
5. BEYOND SAFER TO MORE SUSTAINABLE SUBSTITUTION 49
Exhibit 22. Life-Cycle Analysis (LCA) Aspects of Alternatives Assessments – An Overview from
the German Environment Agency
To foster and mainstream sustainable development, holistic assessments of hazardous chemicals and their alternatives from
chemical-intensive sectors are becoming increasingly important. Whereas alternative assessment addresses aspects like
chemical hazards and exposure, physical/chemical properties, and information on human toxicology and ecotoxicology, life-
cycle assessment (LCA) instruments take into account additional aspects that allow a more holistic sustainability assessment.
For LCA in production and services with chemicals, the following considerations are particularly important:
physical/chemical properties
hazardous properties for human health and for the environment
mobility (long-range transport potential) of a substance
greenhouse gas emissions
resource consumption
recycling potential of a substance
Mobility of a substance should be understood in conjunction with human and environmental hazard. High mobility can
exacerbate concern for hazard, and low mobility may reduce it. Mobility also affects resource efficiency because it could lead
to substance loss. Mobility can be assessed through partitioning and distribution in air and water. For health aspects, the
potential to penetrate the skin should be explored as a mode of mobility.
Assessment of greenhouse potential and resource consumption should be performed in a comparative manner, using
different substances or products for comparison. The greenhouse potential of a substance can be described as CO₂
equivalents emitted along the lifecycle of a substance (e.g., “20 kg CO₂-equivalents / kg substance”). The assessment of
resource consumption should include the demand of energy, raw materials, and water for the production of a substance,
chemical product, or service.
Evaluation of the recycling potential of a substance has to consider three main aspects: Assessment of the extent to which
a substance and possible other substances and/or associated materials can be recovered without risk to human health and
for the environment; assessment of the purity levels of recycling fractions in order to allow the highest possible level of re-
use; and assessment of the quantity of recyclable substances and materials in a recycling process in order to avoid losses.
Substances and chemical products and services that are not designed for recycling should either fully degrade or mineralize
during disposal.
An LCA can be complemented by use-specific aspects like the quantity of the used substance, the emission potential during
use, and consideration of related user groups (professional or consumer). Additionally, substitutability of a substance by a
more sustainable one should be evaluated before its use and during design of chemical products and services. This also
encompasses the comparative evaluation of substances’ innovation potential, leading to potential benefits for society.
Another aspect that is important for sustainable development relates to responsibility in supply chains. The supplier of a
substance should fulfill high environmental and social standards. Raw materials should be selected according to their
sustainability, the conditions of environmental protection and safety and health at the workplace, and social standards like
fair pay.
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
50 5. BEYOND SAFER TO MORE SUSTAINABLE SUBSTITUTION
Notes
1
https://www.ellenmacarthurfoundation.org/circular-economy/concept
2
https://sustainabledevelopment.un.org/topics/chemicalsandwaste
3
https://eippcb.jrc.ec.europa.eu/reference/
4
https://www.wbcsd.org/Projects/Chemicals/Resources/Framework-for-portfolio-sustainability-
assessments
5
https://wupperinst.org/en/topics/resources/calculating-resources/
6
http://www.oecdsaatoolbox.org/Home/NonHazTools
7
https://www.probas.umweltbundesamt.de/php/index.php
8
http://www.sustainabilitymethod.com/
9
https://www.oecd.org/chemicalsafety/risk-management/technical-tools-and-approaches-in-the-design-
of-sustainable-plastics.pdf
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
REFERENCES 51
References
California Code of Regulations. (2013). Title 22, Division 4.5, §69501–§69599. Chapter 55: Safer Consumer
Products Regulation. Retrieved from https://dtsc.ca.gov/wp-content/uploads/sites/31/2018/07/SCP-Final-
Regs-Text-10-01-2013.pdf
Council of the European Union. (1998). Council Directive 98/24/EC of 7 April 1998 on the protection of the
health and safety of workers from the risks related to chemical agents at work. Retrieved from https://eur-
lex.europa.eu/eli/dir/1998/24/2014-03-25
European Commission. (2019). Communication from the Commission to the European Parliament, the
European Council, the Council, the European Economic and Social Committee and the Committee of the
Regions: The European Green Deal. Brussels. Retrieved from
https://ec.europa.eu/info/sites/info/files/european-green-deal-communication_en.pdf
Fantke, P., Huang, L., Overcash, M., Griffing, E., & Jolliet, O. (2020). Life cycle based alternatives
assessment (LCAA) for chemical substitution. Green Chemistry. Retrieved from
https://doi.org/10.1039/D0GC01544J
Greggs, W., Burns, T., Egeghy, P., Embry, M., Fantke, P., Gaborek, B., Heine, L., Jolliet, O., Lee, C., Muir,
D., Plotzke, K., Rinkevich, J., Sunger, N., Tanir, J., & Whittaker, M. (2019). Qualitative Approach to
Comparative Exposure in Alternatives Assessment. Integrated Environmental Assessment and
Management, 15(6), 880-894. Retrieved from https://doi.org/10.1002/ieam.4070
Griesshammer, R., Buchert, M., Gensch, C-O., Hochfeld, C., Manhart, A., Reisch, L., & Rüdenauer, I.
(2007). PROSA – Product Sustainability Assessment: Guideline. Freiburg: Öko-Institut e.V. Retrieved
from https://research.cbs.dk/en/publications/prosa-product-sustainability-assessment-guideline
Jacobs, M., Malloy, T., Tickner, J., & Edwards, S. (2016). Alternatives Assessment Frameworks: Research
Needs for the Informed Substitution of Hazardous Chemicals. Environmental Health Perspectives,
124(3), 265-280. Retrieved from https://doi.org/10.1289/ehp.1409581
National Research Council. (2014). A Framework to Guide Selection of Chemical Alternatives. Washington,
DC: The National Academies Press. Retrieved from https://doi.org/10.17226/18872
Ökopol and Kooperationsstelle Hamburg. (2003). Report compiled for the Directorate General Environment,
Nuclear Safety and Civil Protection of the Commission of the European Communities: Substitution of
Hazardous Chemicals in Products and Processes. Hamburg. Retrieved from
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.306.5104&rep=rep1&type=pdf
Tickner JA, Schifano JN, Rudisill C, Mulvihill MJ. (2015). Advancing safer alternatives through functional
substitution. Environmental Science & Technology, 49(2), 742–749. Retrieved from
https://doi.org/10.1021/es503328m
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
52 REFERENCES
United Nations Economic Commission for Europe (UNECE). (2019). Globally Harmonized System of
Classification and Labelling of Chemicals (GHS). Retrieved from
https://www.unece.org/fileadmin/DAM/trans/danger/publi/ghs/ghs_rev08/ST-SG-AC10-30-Rev8e.pdf
U.S. Environmental Protection Agency (EPA). (2015). EPA’s Safer Choice Standard. Retrieved from
https://www.epa.gov/sites/production/files/2013-12/documents/standard-for-safer-products.pdf
U.S. Occupational Safety and Health Administration (OSHA). Basics of Informed Substitution &
Alternatives Assessment. Retrieved from https://www.osha.gov/dsg/safer_chemicals/basics.html
Wood Environment & Infrastructure Solutions UK Limited and Lowell Center for Sustainable Production,
under commission to the European Commission. (2019). Chemicals Innovation Action Agenda:
Transition to Safer Chemicals and Technologies: Final Report. Luxembourg: Publications Office of the
European Union. Retrieved from https://op.europa.eu/en/publication-detail/-/publication/2d7fc4d1-96f6-
11e9-9369-01aa75ed71a1
Wood Environment & Infrastructure Solutions UK Limited, prepared for Ministerie van Infrastructuur en
Waterstaat. (2018). Safe Chemicals Innovation Agenda: Towards a Research Agenda for Safe Chemicals,
Materials and Products. Retrieved from
https://www.chemischestoffengoedgeregeld.nl/sites/default/files/39982%20-
%20Safe%20Chemicals%20Innovation%20Agenda%20-%2020180613i6%20final%20copy.pdf
GUIDANCE ON KEY CONSIDERATIONS FOR THE IDENTIFICATION AND SELECTION OF SAFER CHEMICAL ALTERNATIVES ©
OECD 2021
As the demand for safer chemicals and technologies grows, the field of
alternatives assessment is becoming increasingly important in guiding the
transition towards safer, less toxic alternatives.
This guidance aims to identify and outline key considerations for the
identification and selection of safer alternatives. It is intended to advance
a consistent understanding of the minimum requirements needed to
determine whether a chemical alternative is safer than the priority chemical,
product, or technology for substitution, independent of the entity performing
the assessment or the alternatives assessment framework being used.
oe.cd/chemicals-risk-management