SPECIFICATIONS

Model name LU-2828V-7

1-needle, Unison-feed, Lockstitch Sewing System
LU-2860V-7 LU-2800V-7 Series
Type
(Shorter - thread remaining type)
2-needle, Unison-feed, Lockstitch Sewing System Semi-dry Direct-drive, Unison-feed, Lockstitch Sewing System
Max. sewing speed 3,500sti/min* with automatic thread trimmer
Max. stitch length 9.0mm 12.0mm
Presser foot 20mm
Alternating vertical movement (DL) 9.0mm
Needle thread tension 0∼200
Presser foot pressure 0∼200
Hook Vertical axis 2.7 fold-capacity hook Vertical axis 2.0 fold-capacity hook
Needle 134×35 Nm140（#22）, Nm125∼180（#20∼#24） 134×35 Nm160（#23）, Nm125∼200（#20∼#25）
Thread
Machine head weight
60/ 3 ∼ 20 / 3（#30∼#5）
66Kg
60 / 3 ∼ 10 / 3（#30∼#0）
68Kg
Inspire the Knowledge in Sewing Adjustment
Epoch-making Sewing Systems in history
*sti/min is the abbreviation for “stitches per minute”

WHEN YOU PLACE ORDERS

Please note when placing orders, that the model name should be written as follows:

Machine head
[1-needle type] Head type Code Gauge type Code Nipper / one-touch type DL function Code
Code
2.7 fold-capacity hook / Gauge for europe A reverse feed Attached S
28
9mm pitch (Shorter - thread remaining type) Provided NB

LU2828 VA7NBBS
Digital type Code Automatic foot lifter Code Option type Code
Digital V Provided (pedal-driven) B Not provided Z
Skip stitch detector / Bobbin thread
remaining detector / Cover sensor unit F

[2-needle type] Head type Code Needle Gauge Code Nipper / one-touch type
Code
Automatic foot lifter Code
2.0 fold-capacity hook / 6mm B reverse feed Provided (pedal-driven) B
60
12mm pitch 8mm C
Not provided / Provided 0B
10mm D

LU2860 VAL 70BBS LU-2828V-7

Digital type Code Gauge type Code DL function Code Option type Code
Digital V Gauge for europe AL Attached S Not provided Z
Skip stitch detector / Bobbin thread
remaining detector / Cover sensor unit F

Control box SC952A

Power supply Code
Single-phase 100~120V S
3-phase 200~240V D
Single-phase 200~240V (for general export) K
Single-phase 200~240V (for ce) N
Single-phase 200~240V (for china) U

JUKI ECO PRODUCTS The LU-2800V-7 is an eco-friendly product which complies with JUKI ECO PRODUCTS standards for protecting the environment.

The sewing machine complies with the “Juki Group Green Procurement Guidelines” on the use of hazardous substances,
which is stricter than other restrictions, such as those of the RoHS Directive. LU-2860V-7
For details of JUKI ECO PRODUCTS, refer to: https://www.juki.co.jp/en/company/eco
The RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.
The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.
Head Office
Registered Organization :
The Scope of the Registration : The activities of research,
development, design, sales, distribution, and maintenance
services of industrial sewing machines, household sewing
machines and industrial robots, etc., including sales and
maintenance services of data entry systems.

2-11-1, TSURUMAKI, TAMA-SHI,

TOKYO 206-8551, JAPAN
PHONE: ( 81) 42-357-2383 Semi-dry Direct-drive, Unison-feed, Lockstitch Sewing System
FAX: ( 81) 42-357-2274 with automatic thread trimmer

LU-2800V-7 Series
SEWING MACHINERY & SYSTEMS BUSINESS UNIT https://www.juki.co.jp/en
Specifications and appearance are subject to change without prior notice for improvement.
Read the instruction manual before putting the machine into service to ensure safety.
This catalogue prints with environment-friendly soyink on recycle paper.
Paper from responsible sources FSC™ C001712 NOVEMBER, 2019 Printed in Japan(TN)
 Digital sewing system proposes the production process added
LU-2828V-7
Semi-dry Direct-drive, 1-needle, Unison-feed, Lockstitch Sewing System
with automatic thread trimmer
with a computerized new value to all the people ( Vertical axis 2.7 fold-capacity hook / Shorter - thread remaining type )

who engage in production.

Shorter - thread remaining type
The shorter-thread remaining type LU-2828V-7 is a
high-performance sewing machine.
Semi - Dry head, Digital Zigzag Stitch Sewing System It leaves a shorter thread on the material at the
beginning of sewing by means of the needle thread

LU-2800V-7 clamp device, as well as at the end of sewing by

means of the thread trimmer which is provided with

Series a shorter-thread remaining function. This means

that manual thread nipping both at the beginning
and at the end of sewing is no longer required,
thereby helping reduce operator fatigue.
Thanks to the adoption of a 2.7- fold hook, the
frequency of bobbin thread changing is reduced The material at The material at
and workability is improved. the beginning of sewing the end of sewing
Surface side

Beautiful finished seams

The needle thread does not remain on the surface side of the material.
Needle thread clamping device (The needle thread clamp is turned ON.)

This device pulls the needle thread

Back side
into the wrong side of the material
at the beginning of sewing, thereby
ensuring more beautifully-finished Remaining-thread length: 5 mm
Management of sewing performance and sewing machine seams. ＊LU-2828V-7 can produce the effect of shorter-thread remaining by making condensed stitch.

with JUKI’s next-generation sewing system.

Machine is mounted with inbuilt NFC ( Near Field Communication ) The shorter-thread trimming mechanism
( needle thread roll-in and shorter-thread remaining type )
and communication devices capable of a 2-way data transmission.
The thread trimming mechanism has been completely renewed. The industry's shortest
remaining thread length achieved by trimming the thread close to the fixed knife at the

New
last stitch (condensed stitch). (The length of remaining needle thread is 5 mm)
Management of sewing performance and sewing machine
by the utilization of IoT ( Internet of Things)

LU-2860V-7
Management, browsing and editing of data can be carried out on the application software Semi-dry Direct-drive, 2-needle, Unison-feed, Lockstitch Sewing System
Data on sewing machine adjustments made according to the product with automatic thread trimmer
( Vertical axis 2.0 fold-capacity hook / 12 mm - pitch type )
to be sewn can be transferred to a commercially-available Android
tablet in contactless mode. This enables quick check for uniform
High and long arm has been adopted. The machine
settings as well as confirmation of conditions of sewing machines
is suited to sew car seats, sofas and bags. It is a
in a sewing line, thereby facilitating setup changes. The operation
sewing machine provided with dramatically improved
panel is also provided as standard with a USB port. Data manage-
workability and functions which are required for
ment and software update can be carried out with ease using a
sewing large products and extra heavy-weight
USB thumb drive. materials.
Data items of sewing can be numerically managed to ensure *Android OS Version 6.0 is recommended to use JUKI Smart APP.
( Operation is confirmed with respect to Versions 5.0 and later. )
“stable quality ” and reduction in time required for setup changes. Contact JUKI distributor in your area for how to use the application software.
Quantified sewing data can be externally taken from the sewing The sewing machine can be paired with equipment which supports
NFC (Near Field Communication) only by holding the equipment over
machine using an Android tablet or USB thumb drive. the sewing machine. Car seat Bag Sofa

Adjustment of sewing condition is displayed on one screen The maximum stitch length is 12 mm
Sewing conditions can be set easy since sewing conditions such as thread tension, stitch length, The maximum stitch length is 12 mm
presser foot pressure, alternate vertical movement amount, etc. are displayed on one screen. This model is the most-desired sewing machine for
sewing furniture such as sofas. It is best-suited to
Energy-saving effect Automatic OFF function of the operation-panel backlight topstitching with a stitch length of maximum 12 mm -
The operation-panel light can be turned OFF after a lapse of the preset time. pitch. During the topstitching process, the longer General stitch length is 6 mm
distance from the machine arm to the bed, in partic-
Sleep mode ( Automatic power-OFF function ) ular, effectively demonstrates the machine's improved
If no operation is carried out for a predetermined period of time, workability.
the power supplies to the motor, etc. can be automatically turned OFF.
*These options can be set up on the operation panel.
 Standard equipment Multi-functional 6-string switch

Needle thread tension active tension Digital control

Sewing conditions can be changed to the best-suited ones only
with the one-touch changeover switch.
Color touch panel Bobbin thread spool device The sewing data (stitch length, needle thread tension, amount of alternate
vertical movement, presser foot pressure and sewing speed) can be changed
Direct-drive motor
easily with the one-touch changeover switch to obtain the ones that have
been elaborated according to sewing conditions.
Needle thread The sewing data (stitch length, needle thread tension, amount of alternate
clamping device ① ② ③ ④ ⑤ ⑥
vertical movement, presser foot pressure and sewing speed) can be
changed easily with the one-touch changeover switch to obtain the ones
① to ③: One-touch changeover function
6-string switch that have been elaborated according to sewing conditions. ④: Automatic reverse feed stitching changeover switch
Presser foot pressure
Four different one-touch functions can be assigned to six-gang hand ⑤: Needle-entry alignment switch
Digital control Jog dial ⑥: Thread clamp switch
switches ① to ⑥, touch-back switch and jog dial, at the maximum.
(* For the initial settings, the one-touch functions are assigned to 6-gang
switches ① to ③.)

Presser foot height

Standby switch Improvement of operability by means of the jog dial
Digital control Multi-layered part detection Digital control
The operator is able to turn the main shaft (for moving the needle bar up
Stitch length Digital control Alternating vertical movement Digital control and down) only with the jog dial without stretching his/her arm to the hand-
wheel.
When the jog dial is pushed, it can be used as 1/ 2 needle-stitch correction Push
switch (one touch function).
Adoption of the needle-thread active tension

Needle tension is digitally controlled Needle thread tension Other continuous sewing conditions
Needle thread tension which matches sewing condi- active tension
tions given can be set on the operation panel and stored For settings corresponding to continuous sewing conditions (polygonal shape stitching function),
in memory. The needle thread tension adjustment more beautifully finished seams are produced by using various functions
needs experience. However, for this sewing machine, (custom-pitch setting function, reverse-feed stitching function).
Needle thread
thread tension data stored in memory is reproducible, clamping device
Material 1

thereby reducing the setup time when the product to Example) Sewing conditions in the case of using Step1
be sewn is changed. the polygonal-shape stitching function ( LU-2828V-7 )
Step3
Example: Needle-thread active tension demonstrates In the case of sewing materials 1 and 2 that differ in Step2
its effectiveness in the topstitching process. thickness to the base material (material thickness),
LU-2828V-7
the sewing conditions can be easily changed over to Step4

the best-suited ones on a step-by-step basis. Base material Step5

Active presser foot pressure mechanism Step3
(The number of stitches, one-touch changeover and
multi-layered part detection are used as the step-by-
The presser foot pressure is digitally controlled Material 2
step changeover triggers.)
Digital control system controls the presser foot pressure.
Under the automatic mode, the multi-layered section
detection function detects changes in material thickness
to increase/decrease the presser foot pressure accord-
ingly. Under the manual mode, the presser foot pressure Bobbin thread spool device Bobbin thread spool device is no necessity of rolling thread manually.
control function is assigned to the hand switch to enable
operation with the hand switch. Maintenance work carried out safely ( Standby switch )
LU-2828V-7
When the standby switch is pressed, the sewing machine does not start unexpectedly even if the pedal is depressed.
When the standby switch is pressed, operations through the operation panel, and with the machine 6-string switch and
Best-suited stitches are produced at multi-layered parts of material.
jog dial are also disabled, thereby allowing sewing-machine maintenance work such as threading, needle replacement,
Multi-layered part detection function gauge replacement to be carried out safely. (In this case, the pulley can be turned by hand.)
Multi-layered parts of material which occur in the case two or more plies of material are sewn or different kinds of
material are sewn can be detected by the multi-layered part detection function to change over the stitch length, thread
High-torque direct-drive motor is installed
tension, presser foot presser and amount of alternate vertical movement to those that have been predetermined for The direct-drive motor system has been adopted by all of the sewing system with
sewing those parts of material. a thread trimmer. As a result, the sewing machine starts up swiftly and promises
increased stop accuracy, thereby demonstrating improved responsiveness.
Setting of thresholds for the multi-layered part detection
Under the teaching mode for the multi-layered part changeover ON sensor value, the material thickness at the normal LED Light
part and that at the multi-layered part of material can be measured with ease. The LED light can adjust the light intensity to 5 levels, and Off setting is also possible.
The automatically-measured thresholds can be set as those for the multi-layered part detection. The operator can set the brightness which is easy to work, improving work efficiency.
 List of Gauges (1-needle type )
Smart Devices Options (to be mounted by manufacturers)
List of gauges for the LU-2828V-7
Throat plate Feed dog Walking foot Presser foot Slide plate of left Slide plate of right Front bed slide
Cover Sensor Unit The cover sensor unit detecting A, B and C (shown below) are closed tightly during sewing, thereby
preventing the sewing machine from starting up unexpectedly. ( A, B and C can be used discretely.) Model

Display error code C

LU-2828V-7 40147944
40190399 40135816 10711653 10712552 40127056 40147918
LU-2828V-7/SD 40162128
※SD: Smart Devices

Optional walking foot for the LU-2828V-7

Piping Piping
Walking foot Presser foot Walking foot Presser foot
A Size (mm)

B 3mm 10745354 10747350 10746352 10747350

4mm 10745453 10747459 10746451 10747459
LU-2860V-7 5mm 10745552 10747558 10746550 10747558
6mm 10745651 10747657 10746659 10747657
A: Eye guard with an open / B: Bed slide with an open / C: Handwheel cover ✽ For general piping ✽ The needle position with respect to the pipe is adjustable.

close sensor close sensor with an open / close sensor Right single-sided presser Left single-sided presser Wider type with For heavy-weight sponges
for sewing material edges for sewing material edges increases efficiency of feed Suitable for highly resilient materials
Walking foot Presser foot Walking foot Presser foot Walking foot Presser foot Walking foot Presser foot

10711851 10712859 10711950 10712958 10712057 10713055 10711752 10712750

The eye guard prevents a broken needle The sewing machine will not start if the throat In a situation where the power is on, the For multi-layered sections For multi-layered sections with a
Narrow width type for improved Side plate with a window
Dual-purpose type for both multi-layered smoother feed of both multi-layered
from flying off. If the eye guard is open, the plate is open. handwheel cover with the open / close sensor sections and flat sections of material and flat sections of material
handling of matter for the LU-2828V-7
sewing machine cannot be started. This prevents the material from being caught prevents the sewing machine from starting
Walking foot Presser foot Walking foot Presser foot Walking foot Presser foot Side plate with window
As a result, the sewing machine will not start in the hook during sewing. suddenly. In addition, the cover prevents
up unexpectedly even if the operator forgets thread and material from being caught in the
to turn the power off. handwheel during sewing. Ø 2.3

5.2
4.5 9.6

10711653 10711653 40160493 LU-2828V-7

10758456 10712651 40160495
Skip Stitch Detector Stitch skipping is detected during sewing. This helps lighten the operator's inspection work load (Standard) (Standard) + SM6040552TP 40155087
and also prevents defective products from being shipped. In the case where a skipped stitch is detected, the buzzer sounds up ※Can not be mounted on smart devices.

and the sewing machine stops. With this function, the operator is allowed to concentrate on sewing work without worryring about
skipped stitching.
List of Gauges (2-needle type )
Bobbin Thread Remaining Detector The buzzer sounds up when the amount of thread remaining on the bobbin
reaches a predetermined length. It is also possible to stop the sewing machine at this point. With this function, the operator is List of gauges for the LU-2860V-7
allowed to concentrate on sewing work without caring about the amount of thread remaining on the bobbin. Remaining on the Throat plate Feed dog Needle clamp Feed foot Presser foot
Slide plate Front bed slide
Asm. Asm. Asm.
bobbin reaches a predetermined length. It is also possible to stop the sewing machine at this point. With this function, the operator
Gauge set
is allowed to concentrate on sewing work without caring about the amount of thread remaining on the bobbin.
Model

Parts number list for Smart Devices Code Gauge set No. Size Part No. Part No. Part No. Part No. Part No. Part No. Part No.
Cover Sensor LU-2860V-7 40147945
B 40155973 6mm 40147951 40126142 40038778 40135589 10781656
Model Hook LU-2860V-7/SD 40198302
Set parts
① Eye guard ②Slide plate ③ Handwheel ④Cable
（①+②+③+④） cover LU-2860V-7 40147945
C 40155974 8mm 40147952 40126143 40038776 40135590 10781755
LU-2860V-7/SD 40198302
LU-2828V-7 ― 40198452 40171583 40112210
LU-2860V-7 40147945
(right) 40175683 D 40155975 10mm 40147953 40126144 40038774 40038898 10781854
LU-2860V-7 40198458 LU-2860V-7/SD 40198302
― (left) 40198459
40193646 40193648 40193645 LU-2860V-7 40147945
E 40155976 12mm 40147954 40126145 40038772 40095748 10781953
LU-2860V-7 LU-2860V-7/SD 40198302
(right) 40177671
(Skip Stitch Detector, ― 40198460 ✽ The [bed slide] is not included in the gauge set. (For the 6 to 12 mm gauges, the bed slide which is provided as standard at the time of shipment is applicable.)
Bobbin Thread Remaining Detector) (left) 40198461
✽ The finger guard is a component included in the presser foot (asm.).

Skip Stitch Detector, Bobbin Thread Remaining Detector

Model Hook
Optional walking foot Presser foot with center guide Side plate
⑤ Skip Stitch ⑥Bobbin Thread
Set parts
（⑤+⑥+⑦） Detector Remaining Detector
⑦ Filter regulator (asm.) for the LU-2860V-7 for the LU-2860V-7 with a window
Walking foot with groove
Walking foot Presser foot
for the LU-2860V-7
LU-2828V-7 ― 40198455 40198453 40198457 (needle hole: 2.1mm)
Needle Side plate with window
Koban Hook 40205490 40205493 40198456
LU-2860V-7 40205491 (right & left)
gauge
Hirose Hook 40205531 40205533 (mm)
※When purchasing ① eye guard, ②Slide plate or ③ handwheel cover separately, 1 set of ④ cable should also be purchased.
※ When purchasing ⑤ skip stitch detection device and ⑥ bobbin thread detection device separately, 1 piece of ⑦ filter regulator (asm.) should also be purchased. Needle 6 40038854 ✽1
40038810
gauge Part No. 8 40038852 ✽1

(mm) ✽2 40038808 LU-2860V-7

8 40067204
6 10783157 10 40038850 ✽1
40156017
8 10783256 ✽2 40038806
10 40039271
Options 10 10783355 12 40038848 ✽1
40038802
12 10783454 12 40095750 ✽2

✽ The needle hole in the sole of the walking foot has a slit
✽ 1 Diameter of the needle entry hole in the walking foot: 2.1mm
Description Part No. Feature (1 mm in width and 0.5 mm in depth) on the opposite side of the operator. ✽ 2 Diameter of the needle entry hole in the walking foot: 3mm
✽ Please use the “presser foot asm.” of “List of gauges for the LU-2860A”.
DIGITAL EDGE GUIDE 40198152 The position of the edge guide can be digitally controlled on the operation panel, improving productivity and quality.
REVERSE FEED LEVER KIT 40207826 Since the feed amount can be adjusted in a stepless, more accurate alignment is possible, such as even at the corners.