Bsee-3c Pee6-M Assignment 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

MAYLAS, LORMAN A. ENGR.

ROVENSON SEVILLA
BSEE-3C 10 PROBLEMS ASSIGNMENT

1.)

2.)
MAYLAS, LORMAN A. ENGR. ROVENSON SEVILLA
BSEE-3C 10 PROBLEMS ASSIGNMENT

3.) A 3 phase 150kVA, 4160V, 0.8 logging PF load is to be supplied by three single-phase transformers
having on turns ratio of 2. Calculate the current that flows in the primary windings if the transformers are
connected delta-delta.

4.) A balanced 3 Phase transformer bank has delta-connected primary and wye-connected secondary
windings. The Primary to secondary winding voltage ratio is 2400/277. Solve, for the primary line current
if the lo-side (secondary) load draws a line Current of 1000 A.
MAYLAS, LORMAN A. ENGR. ROVENSON SEVILLA
BSEE-3C 10 PROBLEMS ASSIGNMENT

5.) a bank of 50:1 single-phase transformers connected Wye-Delta is used to step-down the HV
transmission line rated 138kV. Determine the magnitude of the step-down voltage.

6.) What should be the turns ratio of a three phase transformer to transform 10000kVA from 230 kV to
4160kV if the transformer is to be connected delta-wye?

7.) A power transformer rated 50000kVA, 34.5/13.8kV is connected wye-grounded primary and delta on
the secondary. Determine the full load phase current on the secondary side.
MAYLAS, LORMAN A. ENGR. ROVENSON SEVILLA
BSEE-3C 10 PROBLEMS ASSIGNMENT

8.) The potential transformer of a line has a ratio 132000/66. Those are connected in wye-delta. The
voltmeter reads 64 volts. What is the voltage of the line?

9.) The PTS of 220kV transmission line ratio of 132.76/66375 and are connected wye-wye. A voltmeter
connected line to ground reads 66 volts.

10.) A 69/138kV, 10 MVA three-phase transformer is connected wye to delta. What is the bV rating of the
secondary winding?

You might also like