SKF ball bearing units – UC range

200 and 300 series

Japanese Industrial Standards compliant ball bearing units
Solid design, solid benefits

In order to meet the industry’s demands of improved protection Easy to order, easy to replace
against contaminant ingress, better shaft balance and locking
strength, we have now developed a new range of ball bearing You want a solution that makes your life easy – a solution with inter-
units – the UC range. changeable boundary dimensions, housing configurations and part
numbers. The UC range ball bearing units achieve this and more. It’s
These bearing units offer optimized protection against contaminants compatible with JIS* housings available today on the market. No mod-
as well as better resistance against washdowns. In addition, the units ification of your machine is needed. The dimensions meet most of the
of the 200 series are designed with a 120° grub screw angle locking current UC designated bearing unit fitting requirements. And whatever
system to operate reliably in applications where good shaft balance is product you need, with SKF you know it will be easy to obtain,
needed and where systemic vibration is a characteristic application straightforward to install and manufactured to SKF quality levels.
condition.

* JIS: Japanese Industrial Standards

Main applications
include
• Material handling
conveyors
• Agriculture machinery
• Food & beverage
machinery
• Packaging equipment
• Fitness equipment
• Air handling

Other industries
• Textile machinery
• Construction machinery
• Escalators
• Metal industry
 Fig. 1 Sealing system
UC bearing unit, 200 series
SKF has cascaded its extensive field proven
sealing experience to this new product
range. The sealing system consists of an
integral single-lip inner seal and an external
flinger fitted on the inner ring (fig 1). This
additional barrier acting as a deflector,
together with the seal, improves bearing
protection against the ingress of contami-
nants. Comparative tests of contaminant and
washdown resistance show that SKF units
perform better than comparable competitor
products (diagrams 1 and 2).

Solid design for increased

cleanliness
The solid base design provides a smooth
surface to avoid the harboring of contami-
nants, especially in contaminated conveyor
operating environments. The solid design
also limits the risk of dirt collecting under-
neath the housing support and improves
resistance to vibration.
To help comply with health and safety reg-
ulations, UC bearing units of the 200 series
with flanged and take-up housings are avail-
able with hydrophobic polypropylene end
covers. We offer these end covers as a high
availability option.

Diagram 1 Diagram 2 Diagram 3

Contaminant resistance, mud test (hours) Washdown resistance (score) Axial holding power – grub screws (kN/Nm)

100 5 1.8
1.6
80 4 1.4
1.2
60 3
1.0
0.8
40 2
0.6

20 1 0.4
0.2
0 0 0
SKF ball UC competitor SKF ball UC competitor SKF ball UC competitor
bearing units products bearing units products bearing units products
UC range UC range UC range

3
 Fig. 2

120°

Please note that end covers are not included with

the SKF ball bearing units and must be ordered
separately.

Better balance with a 120° 1) A test of the axial holding power of the SKF high-quality grease
grub screw showed that the SKF locking
locking screw angle
system performed better than our competi- Poor lubrication accounts for over 36% of
One of the most frequent causes for ball bear- tors’ equivalent offers (diagram 3, page 3). premature bearing failures. In fact, most low
ing unit failures in high speed applications is speed applications fail due to lubrication
shaft imbalance and vibration loosening the related issues, not necessarily due to bearing
locking system. Designing the UC range of fatigue. Provided that recommended main-
the 200 series with a grub screw angle of tenance intervals are followed, SKF
120° not only improves balance at high 1) Valid up to bore diameter 65 mm, for larger high-quality grease helps bearings achieve
speed, it also reduces deformation of the diameter shaft applications and for the 300 expected service life as the SKF lubricants
bearing when locking. For distribution of the series characterized by higher peak loads and are designed to perform under real condi-
lower rotational speeds, the ball bearing unit
forces acting on the shaft (fig 2). features a grub screw angle of 62° tions (table 1).

Table 1
Your benefits at a glance
Lubricating greases

Technical specification Grease fills in SKF understands machine and plant productivity and the need
standard ball bearings to deliver high rotating equipment performance. The UC range
standard ball bearing units has been designed to provide reliable performance as well as
reduce machine downtime. It includes specific features that
Thickener Lithium-calcium soap can make the difference in your equipment:
Base oil Mineral oil
• Interchangeable with JIS housing
Colour Yellowish brown • Full range assortment
Temperature range [°C] –30 to +1201) • Shorter lead times with available local stock
(continuous operation) • 120° grub screw angle for the 200 series – better balance at
high speed and less deformation when locking
Kinematic viscosity [mm2/s] 190/15
• 62° grub screw angle for the 300 series – better holding
Consistency 2 power for high peak load and low speed
(to NLGI scale) • Robust design reducing contaminant ingress and vibration
Other Long life grease • Enhanced washdown resistance

1) The temperature range for reliable operation in accordance with the SKF traffic light concept is
between 10 and 120 °C.

4
Designations Designation system
The complete designation for the SKF ball
Examples: UCFL 204/H UC FL 2 04 /H
bearing units – UC range consists of: UCP 316 UC P 3 16

• Prefixes, identifying ball bearing housing

type Bearing series
• Figures, identifying the size
• Suffixes, identifying design and variants UC Insert bearing with grub screws
UK1) Insert bearing with a tapered bore and adapter sleeve

More details about the basic designations Housing type

and the supplementary designations can be
P Pillow block unit
obtained from the table Designation F Flanged unit, square 4-bolt flange
system. FL Flanged unit, oval 2-bolt flange
FC Flanged unit, round 4-bolt flange
T Take-up unit for linear motion
FB Flanged unit, 3-bolt bracket flange
SKF’s global distribution PA Short base pillow block unit

network – always close to

Dimension series
you
2 Normal series
Finding replacement parts can sometimes 3 Heavy duty series
be a challenge. SKF is well positioned to
bring you the right support and the right
Bore diameter
parts, no matter where your application is
based. We have 17,000 distribution locations For metric shaft
04 20 mm
in over 130 countries around the globe, to to
which, together with our distribution part- 18 90 mm
ners, help us achieve industry leading prod-
uct availability. Suffixes

/H Higher contamination resistance compared to standard and also

specifically for UC, higher stability and better load balance than
standard with 120° grub screw angle instead of 62°.

K Without adapter sleeve

1) Order adapter sleeve separately.

Technical specifications
Dimensions and tolerances Ball bearings UC type according to ISO 9628:2006
Ball bearings UK type according to JIS B 1558:1995, with tapered bore 1:12
Adapter sleeve for UK type H23 series according to ISO 2982-1:1995
Housings according to JIS B 1559:1995

Bearing radial internal clearance Ball bearings UC type with cylindrical bore according to Group N (CN) ISO 9628:2006
Ball bearings UK type with tapered bore according to Group 3 (C3) ISO 9628:2006

Recommended fits and shaft tolerances Ball bearings UC type with cylindrical bore: • for P > 0,05 C and/or high speeds → h6
• for 0,035 C < P ≤ 0,05 C → h7
• for 0,02 C < P ≤ 0,035 C and/or low speeds → h8
• simple bearing arrangements or P ≤ 0,02 C → h9 – h11

Ball bearings UK type with tapered bore: • for all loads and speeds → h9/IT5

Rotation limiting speed Please refer to the technical tables enclosed

Permissible misalignment Up to 5° when lubrication is not required

Up to 2° when lubrication is required

Lubrication and maintenance Standard grease characteristics, please refer to Table 1

Bearing relubrication is not required if: • loads and speeds are moderate
• vibration does not occur
• operating temperatures are between 40 and 55 °C

5
Insert bearings with set screws, metric shafts
d 30 – 100 mm

C C

r1 r1
r2 r2
B B
D d d1 D d d1
s1 s1

Pressed steel cage

Dimensions Basic load ratings Fatigue load Limiting speed Mass Designation
dynamic static limit with shaft
tolerance
d D B C d1 s1 r1,2 C C0 Pu h6
min.

mm kN kN r/min kg –

30 72 43 21 44,8 26 2 26,5 15,0 0,6 5 300 0,54 UC 306

35 80 48 23 50,4 29 2,5 33,2 19,3 0,8 4 700 0,71 UC 307

40 90 52 25 56,5 33 2,5 41,0 24,0 1,0 4 200 0,96 UC 308

45 100 57 29 63 35 2,5 52,7 32,0 1,3 3 750 1,3 UC 309

50 110 61 30 69,1 39 3 61,8 38,0 1,6 3 400 1,7 UC 310

55 120 66 32 76,1 41 3 71,5 45,0 1,9 3 100 2,1 UC 311

60 130 71 35 81,7 45 3,5 81,9 52,0 2,2 2 900 2,6 UC 312

75 160 82 43 101,3 50 3,5 114 76,5 3,0 2 300 4,7 UC 315

80 170 86 44 107,9 52 3,5 124 86,5 3,3 2 150 5,5 UC 316

100 215 108 54 135,5 66 4,5 174 140,0 4,8 1 700 10,9 UC 320

6
Insert bearings with set screws, inch shafts
d 3 – 4 in.
76,2 – 101,6 mm

C C

r1 r1
r2 r2
B B
D d d1 D d d1
s1 s1

Pressed steel cage

Dimensions Basic load ratings Fatigue load Limiting speed Mass Designation
dynamic static limit with shaft
tolerance
d D B C d1 s1 r1,2 C C0 Pu h6
min.

in/mm kN kN r/min kg –

3 160 82 43 101,3 50 3,5 114 76,5 3 2 300 4,55 UC 315-48

76,2

4 215 108 54 135,5 66 4,5 174 140 4,75 1 700 10,7 UC 320-64
101,6

7
Pillow block ball bearing units, grub screw locking, metric shafts
d 20 – 100 mm

J
A1

N1

s1
d H
B N

H1
H2

A G
J
L

UCP 204/H to UCP 213/H UCP 214 to UCP 218

UCP 306 to UCP 320

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft
tolerance h6
d H1 J C C0 Pu

mm kN r/min kg –

20 33,3 95 12,7 6,55 0,28 6 500 0,6 UCP 204/H

25 36,5 105 14 7,8 0,335 5 850 0,76 UCP 205/H

30 42,9 121 19,5 11,2 0,475 5 000 1,2 UCP 206/H

50 140 26,5 15 0,64 5 300 2,15 UCP 306

35 47,6 127 25,5 15,3 0,655 4 300 1,5 UCP 207/H

56 160,5 33,2 19,3 0,815 4 700 3 UCP 307

40 49,2 137 30,7 19 0,8 3 750 2 UCP 208/H

60 170,5 41 24 1,02 4 200 3,6 UCP 308

45 54 146 33,2 21,6 0,915 3 400 2,2 UCP 209/H

67 190 52,7 32 1,34 3 750 5,05 UCP 309

50 57,2 159 35,1 23,2 0,98 3 300 2,7 UCP 210/H

75 212,5 61,8 38 1,6 3 400 6,5 UCP 310

55 63,5 171 43,6 29 1,25 3 000 3,55 UCP 211/H

80 236,5 71,5 45 1,9 3 100 7,8 UCP 311

60 69,8 184 52,7 36 1,53 2 700 4,55 UCP 212/H

85 250,5 81,9 52 2,2 2 900 9,75 UCP 312

65 76,2 203 57,2 40 1,7 2 350 6,25 UCP 213/H

70 79,4 210 62,4 45 1,86 2 250 6,8 UCP 214

75 82,6 217 66,3 49 2,04 2 100 7,3 UCP 215

100 290,5 114 76,5 3 2 300 15,5 UCP 315

80 88,9 232 71,5 54 2,2 1 900 9,45 UCP 216

106 300,5 124 86,5 3,25 2 150 18,2 UCP 316

85 95,2 247 83,2 64,0 2,5 1 800 12,9 UCP 217

90 101,6 262 95,6 72 2,7 1 600 14,1 UCP 218

100 140 380,5 174 140 4,75 1 700 36,7 UCP 320

8
Dimensions

d A A1 B H H2 L N N1 G s1

mm

20 34 21 31 64,5 13,5 127 18 13 10 18,3

25 38 22 34,1 70,5 16 139,5 18 13 10 19,8

30 45 24 38,1 83,5 16,5 165 21 17 14 22,2

47 32 43 100 21 182 19 17 14 26

35 46 27 42,9 93,5 18,5 166,5 21 17 14 25,4

54 36 48 111,5 23 209 24,5 17 14 29

40 49 29 49,2 101 20,5 184 21 17 14 30,2

57 38 52 119,5 25 221 26,5 17 14 33

45 51 29 49,2 108 19 189,5 21 17 14 30,2

63 42 57 136 25 247 29 20 16 35

50 56 31 51,6 116 19 206,5 22 20 16 32,6

65 43 61 152 25 275 34,5 20 16 39

55 59 35 55,6 126 22 219 22 20 16 33,4

68 45 66 162 25 302 37,5 20 16 41

60 62 36 65,1 141,5 22 239,5 25 20 16 39,7

72 48 71 171 35 321 36,5 24 20 45

65 72 35 68,3 153,5 25,5 265 30 25 20 42,9

70 72 41 69,9 159,5 28 266 30 25 20 39,7

75 73 42 77,8 164 25,5 271,5 30 25 20 44,5

86 58 82 202 40 368 39,5 27 22 50

80 78 45 82,6 176 32,5 292 35 25 20 49,3

93 62 86 215 40 378 39,5 27 22 52

85 83,2 47,6 85,7 188,91 36 310,36 35 25 M20 51,6

90 88 51 96 202,5 36,5 327 40 27 22 56,3

100 107 71 108 283 55 482 49,5 36 30 66

9
Pillow block ball bearing units, grub screw locking, inch shafts
d 3/4 – 4 in.
19,05 – 101,6 mm

J
A1

N1

s1
d H
B N

H1
H2

A G
J
L

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft
tolerance h6
d H1 J C C0 Pu

in./mm mm kN r/min kg –

3/4 33,3 95 12,7 6,7 0,285 6 500 0,6 UCP 204-12

19,05
7/8 36,5 105 14 7,8 0,335 5 850 0,79 UCP 205-14
22,225
15/16 36,5 105 14 7,8 0,335 5 850 0,77 UCP 205-15
23,812

1 36,5 105 14 7,8 0,335 5 850 0,76 UCP 205-16

25,4

1 1 /8 42,9 121 19,5 11,4 0,48 5 000 1,2 UCP 206-18

28,575

1 3/16 42,9 121 19,5 11,4 0,48 5 000 1,2 UCP 206-19
30,162

1 1 /4 47,6 127 25,5 15,3 0,655 4 300 1,55 UCP 207-20

31,75

1 3/8 47,6 127 25,5 15,3 0,655 4 300 1,5 UCP 207-22
34,925

1 7/16 47,6 127 25,5 15,3 0,655 4 300 1,5 UCP 207-23
36,512

1 1 /2 49,2 137 32,5 20 0,85 3 750 2,05 UCP 208-24

38,1

1 3/4 54 146 32,5 20,4 0,865 3 400 2,25 UCP 209-28

44,45

2 63,5 171 43,6 29 1,25 3 000 3,75 UCP 211-32

50,8

2 1/4 69,8 184 52,7 36 1,53 2 700 4,8 UCP 212-36

57,15

2 1/2 76,2 203 57,2 40 1,7 2 350 6,35 UCP 213-40

63,5

3 100 290 114 76,5 3 2 300 15,4 UCP 315-48

76,2

4 140 380 174 140 4,75 1 700 36,4 UCP 320-64

101,6

10
Dimensions

d A A1 B H H2 L N N1 G s1

in./mm mm

3/4 34 21 31 64,5 13,5 127 18 13 10 18,3

19,05
7/8 38 22 34 70,5 16 139,5 18 13 10 19,7
22,225
15/16 38 22 34 70,5 16 139,5 18 13 10 19,7
23,812

1 38 22 34 70,5 16 139,5 18 13 10 14,3

25,4

1 1/8 45 24 38,1 83,5 16,5 165 21 17 14 22,2

28,575

1 3/16 45 24 38,1 83,5 16,5 165 21 17 14 22,2

30,162

1 1/4 46 27 42,9 93,5 18,5 166,5 21 17 14 25,4

31,75

1 3/8 46 27 42,9 93,5 18,5 166,5 21 17 14 25,4

34,925

1 7/16 46 27 42,9 93,5 18,5 166,5 21 17 14 25,4

36,512

1 1/2 49 29 49,2 101 20,5 184 21 17 14 30,2

38,1

1 3/4 51 29 49,2 108 19 189,5 21 17 14 30,2

44,45

2 59 35 55,6 126 22 219 22 20 16 33,4

50,8

2 1 /4 62 36 65,1 141,5 22 239,5 25 20 16 39,7

57,15

2 1 /2 72 35 65,1 153,5 25,5 265 30 25 20 39,7

63,5

3 86 57,6 82 202,7 40 368 39,5 27 22 50

76,2

4 107 71,4 108 283,7 55 482 49,5 36 30 66

101,6

11
Square flanged ball bearing units, grub screw locking, metric shafts
d 20 – 100 mm

A
A1 N
A5

s1
d
B

G
J
L
T

UCF 204/H to UCF 213/H UCF 214 to UCF 218

UCF 306 to UCF 320

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Associated
tolerance h6 end cover
d J C C0 Pu

mm kN r/min kg –

20 64 12,7 6,55 0,28 6 500 0,53 UCF 204/H ECY 204

25 70 14 7,8 0,335 5 850 0,72 UCF 205/H ECY 205

30 83 19,5 11,2 0,475 5 000 1,05 UCF 206/H ECY 206

95 26,5 15 0,64 5 300 1,75 UCF 306 –

35 92 25,5 15,3 0,655 4 300 1,35 UCF 207/H ECY 207

100 33,2 19,3 0,815 4 700 2,1 UCF 307 –

40 102 30,7 19 0,8 3 750 1,8 UCF 208/H ECY 208

112 41 24 1,02 4 200 2,65 UCF 308 –

45 105 33,2 21,6 0,915 3 400 2,1 UCF 209/H ECY 209
125 52,7 32 1,34 3 750 3,8 UCF 309 –

50 111 35,1 23,2 0,98 3 300 2,4 UCF 210/H ECY 210
132 61,8 38 1,6 3 400 4,95 UCF 310 –

55 130 43,6 29 1,25 3 000 3,4 UCF 211/H ECY 211

140 71,5 45 1,9 3 100 5,5 UCF 311 –

60 143 52,7 36 1,53 2 700 4,05 UCF 212/H ECY 212

150 81,9 52 2,2 2 900 7 UCF 312 –

65 149 57,2 40 1,7 2 350 5,35 UCF 213/H ECY 213

70 152 62 44 1,86 2 250 5,95 UCF 214 ECY 214

75 159 66 49 2,04 2 100 6,2 UCF 215 ECY 215

184 114 76,5 3 2 300 11,6 UCF 315 –

80 165 72 54 2,2 1 900 7,35 UCF 216 ECY 216

196 124 86,5 3,25 2 150 15,4 UCF 316 –

85 175 83,2 64,0 2,5 1 800 8,91 UCF 217 ECY 217

90 187 96 72 2,7 1 600 11,5 UCF 218 ECY 218

100 242 174 140 4,75 1 700 29,8 UCF 320 –

12
Dimensions

d A A1 A5 B L N G s1 T

mm

20 25,5 11 20,5 31 86 12 10 18,3 33,3

25 27 13 20,5 34,1 95 12 10 19,8 35,8

30 30 14 22,5 38,1 108 12 10 22,2 40,2

34 16 – 43 127 16 14 26 44

35 32 15 24,5 42,9 118 14 12 25,4 44,4

38 17 – 48 137 19 16 29 49

40 35,5 15 26 49,2 130 16 14 30,2 51,2

42 18 – 52 149 19 16 33 56

45 38 16 26,5 49,2 137 16 14 30,2 52,2

46 19 – 57 162 19 16 35 60

50 39,5 16 33 51,6 143 16 14 32,6 54,6

49,5 20 – 61 175 23 20 39 67

55 43 18 37,5 55,6 162 19 16 33,4 58,4

53 21 – 66 175 23 20 41 71

60 47,5 18 39 65,1 175 19 16 39,7 68,7

57,5 23 – 71 193 23 20 45 78

65 50 22 39 68,3 187 19 16 42,9 72,9

70 54 22 41,5 74,6 193 19 16 44,4 75,4

75 56,5 22 41,5 77,8 200 19 16 44,5 78,3

68 26 – 82 229 25 22 50 89

80 58 22 41,5 82,6 208 23 20 49,3 83,3

68,5 28 – 86 252 31 28 52 90

85 62,7 23,8 43,2 85,7 219,9 23 20 51,6 87,6

90 68,5 25 45,5 96 235 23 20 56,3 96

100 94,5 33 – 108 312 38 33 66 125

13
Square flanged ball bearing units, grub screw locking, inch shafts
d 3/4 – 4 in.
19,05 – 101,6 mm
A
A1 N
A5

s1
d
B

G
J
L
T

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Associated
tolerance h6 end cover
d J C C0 Pu

in./mm mm kN r/min kg –

3/4 64 12,7 6,7 0,285 6 500 0,53 UCF 204-12 ECY 204
19,05
7/8 70 14 7,8 0,335 5 850 0,74 UCF 205-14 ECY 205
22,225
15/16 70 14 7,8 0,335 5 850 0,73 UCF 205-15 ECY 205
23,812

1 70 14 7,8 0,335 5 850 0,71 UCF 205-16 ECY 205

25,4

1 1/8 83 19,5 11,4 0,48 5 000 1,05 UCF 206-18 ECY 206
28,575

1 3/16 83 19,5 11,4 0,48 5 000 1,05 UCF 206-19 ECY 206
30,162

1 1/4 92 25,5 15,3 0,655 4 300 1,4 UCF 207-20 ECY 207
31,75

1 3/8 92 25,5 15,3 0,655 4 300 1,35 UCF 207-22 ECY 207
34,925

1 7/16 92 25,5 15,3 0,655 4 300 1,3 UCF 207-23 ECY 207
36,512

1 1/2 102 32,5 20 0,85 3 750 1,85 UCF 208-24 ECY 208
38,1

1 3/4 105 32,5 20,4 0,865 3 400 2,1 UCF 209-28 ECY 209
44,45

2 130 43,6 29 1,25 3 000 3,6 UCF 211-32 ECY 211

50,8

2 1/4 143 52,7 36 1,53 2 700 4,25 UCF 212-36 ECY 212
57,15

2 1/2 149 57,2 40 1,7 2 350 5,4 UCF 213-40 ECY 213
63,5

3 184 114 76,5 3 2 300 11,6 UCF 315-48 -

76,2

4 242 174 140 4,75 1 700 29,5 UCF 320-64 -

101,6

14
Dimensions

d A A1 A5 B L N G s1 T

in./mm mm

3/4 25,5 11 20,5 31 86 12 10 18,3 33,3

19,05
7/8 27 13 20,5 34 95 12 10 19,7 35,7
22,225
15/16 27 13 20,5 34 95 12 10 19,7 35,7
23,812

1 27 13 20,5 34 95 12 10 14,3 35,7

25,4

1 1/8 30 14 22,5 38,1 108 12 10 22,2 40,2

28,575

1 3/16 30 14 22,5 38,1 108 12 10 22,2 40,2

30,162

1 1/4 32 15 24,5 42,9 118 14 12 25,4 44,4

31,75

1 3/8 32 15 24,5 42,9 118 14 12 25,4 44,4

34,925

1 7/16 32 15 24,5 42,9 118 14 12 25,4 44,4

36,512

1 1/2 35,5 15 26 49,2 130 16 14 30,2 51,2

38,1

1 3/4 38 16 26,5 49,2 137 16 14 30,2 52,2

44,45

2 43 18 37,5 55,6 162 19 16 33,4 58,4

50,8

2 1 /4 47,5 18 39 65,1 175 19 16 39,7 68,7

57,15

2 1 /2 50 22 39 65,1 187 19 16 39,7 69,7

63,5

3 68 26 – 82 229 25 22 50 89
76,2

4 94,5 33 – 108 312 38 33 66 125

101,6

15
Oval flanged ball bearing units, grub screw locking
d 20 – 90 mm
A
A1 N

A5

s1
d J H
B

T L

UCFL 204/H to UCFL 213/H UCFL 214 to UCFL 218

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Associated
tolerance h6 end cover
d J C C0 Pu

mm kN r/min kg –

20 90 12,7 6,55 0,28 6 500 0,44 UCFL 204/H ECY 204

25 99 14 7,8 0,335 5 850 0,61 UCFL 205/H ECY 205

30 117 19,5 11,2 0,475 5 000 0,9 UCFL 206/H ECY 206

35 130 25,5 15,3 0,655 4 300 1,15 UCFL 207/H ECY 207

40 144 30,7 19 0,8 3 750 1,5 UCFL 208/H ECY 208

45 148 33,2 21,6 0,915 3 400 1,8 UCFL 209/H ECY 209

50 157 35,1 23,2 0,98 3 300 2,2 UCFL 210/H ECY 210

55 184 43,6 29 1,25 3 000 3,05 UCFL 211/H ECY 211

60 202 52,7 36 1,53 2 700 3,85 UCFL 212/H ECY 212

65 210 57,2 40 1,7 2 350 4,85 UCFL 213/H ECY 213

70 216 62,4 44 1,86 2 250 5,45 UCFL 214 ECY 214

75 225 66,3 49 2,04 2 100 5,95 UCFL 215 ECY 215

80 233 71,5 54 2,2 1 900 7,5 UCFL 216 ECY 216

85 248 83,2 64,0 2,5 1 800 8,83 UCFL 217 ECY 217

90 265 95,6 72 2,7 1 600 11,3 UCFL 218 ECY 218

16
Dimensions

d A A1 A5 B H L N G s1 T

mm

20 25,5 11 20,5 31 113 60 12 10 18,3 33,3

25 27 13 20,5 34,1 130 68 16 14 19,8 35,8

30 30 13 22,5 38,1 147,5 80 16 14 22,2 40,2

35 32 14 24,5 42,9 161 90 16 14 25,4 44,4

40 34 14 26 49,2 174,5 100 16 14 30,2 51,2

45 35 15 26,5 49,2 188 108 19 16 30,2 51,2

50 39 15 33 51,6 197 115 19 16 32,6 53,6

55 41,5 18 37,5 55,6 224 130 19 16 33,4 58,4

60 45 18 39 65,1 250 140 23 20 39,7 68,7

65 47 20 39 68,3 258 155 23 20 42,9 72,9

70 50 20 41,5 74,6 265 160 23 20 44,4 75,4

75 54 20 41,5 77,8 275 164 23 20 44,5 78,5

80 56 20 41,5 82,6 290 180 25 22 49,3 83,3

85 60 22 43,2 85,7 305 190 25 22 51,6 87,6

90 68 23 45,5 96 320 205 25 22 56,3 96,3

17
Round flanged ball bearing units, grub screw locking
d 20 – 90 mm

T N
A5

s1
d Da J L
B

A1 J1
A3

UCFC 204/H to UCFC 213/H UCFC 214 to UCFC 218

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Associated
tolerance h6 end cover
d Da J J1 C C0 Pu

h8

mm kN r/min kg –

20 62 78 55,2 12,7 6,55 0,28 6 500 0,71 UCFC 204/H ECY 204

25 70 90 63,6 14 7,8 0,335 5 850 1 UCFC 205/H ECY 205

30 80 100 70,7 19,5 11,2 0,475 5 000 1,3 UCFC 206/H ECY 206

35 90 110 77,8 25,5 15,3 0,655 4 300 1,6 UCFC 207/H ECY 207

40 100 120 84,9 30,7 19 0,8 3 750 2 UCFC 208/H ECY 208

45 105 132 93,3 33,2 21,6 0,915 3 400 2,7 UCFC 209/H ECY 209

50 110 138 97,6 35,1 23,2 0,98 3 300 2,9 UCFC 210/H ECY 210

55 125 150 106,1 43,6 29 1,25 3 000 4,1 UCFC 211/H ECY 211

60 135 160 113,1 52,7 36 1,53 2 700 4,95 UCFC 212/H ECY 212

65 145 170 120,2 57,2 40 1,7 2 350 5,65 UCFC 213/H ECY 213

70 150 177 125,2 62,4 44 1,86 2 250 6,85 UCFC 214 ECY 214

75 160 184 130,1 66,3 49 2,04 2 100 7,35 UCFC 215 ECY 215

80 170 200 141,4 71,5 54 2,2 1 900 9,1 UCFC 216 ECY 216

85 180 208 147,1 83,2 64,0 2,5 1 800 10,3 UCFC 217 ECY 217

90 190 220 155,6 95,6 72 2,7 1 600 12,8 UCFC 218 ECY 218

18
Dimensions

d A A1 A3 A5 B L N G s1 T

mm

20 26 7 5 20,5 31 100 12 10 18,3 28,3

25 27,5 7 6 20,5 34,1 115 12 10 19,8 29,8

30 30 8 8 22,5 38,1 125 12 10 22,2 32,2

35 32 9 8 24,5 42,9 135 14 12 25,4 36,4

40 35,5 9 10 26 49,2 145 14 12 30,2 41,2

45 37,5 14 12 26,5 49,2 160 16 14 30,2 40,2

50 39 14 12 33 51,6 165 16 14 32,6 42,6

55 43 15 12 37,5 55,6 185 19 16 33,4 46,4

60 47,5 15 12 39 65,1 195 19 16 39,7 56,7

65 50 15 14 39 68,3 205 19 16 42,9 58,9

70 54 10 14 41,5 74,6 215 19 16 44,4 61,4

75 56 10 16 41,5 77,8 220 19 16 44,5 62,5

80 58 10 16 41,5 82,6 240 23 20 49,3 67,3

85 62,7 18 18 43,2 85,7 250 23 20 51,6 69,6

90 68,5 20 18 45,5 96 265 23 20 56,3 78,3

19
Take-up ball bearing units, grub screw locking
d 20 – 85 mm

A2 L3 N1 A5
L2

s1
d B H H1 N N2 H2

A1 L1
A L

UCT 204/H to UCT 213/H UCT 214 to UCT 217

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing Associated
tolerance h6 unit end cover
d H1 A1 N C C0 Pu

mm kN r/min kg –

20 76 12 19 12,7 6,55 0,28 6 500 0,7 UCT 204/H ECY 204

25 76 12 19 14 7,8 0,335 5 850 0,79 UCT 205/H ECY 205

30 89 12 22 19,5 11,2 0,475 5 000 1,25 UCT 206/H ECY 206

35 89 12 22 25,5 15,3 0,655 4 300 1,6 UCT 207/H ECY 207

40 102 16 29 30,7 19 0,8 3 750 2,35 UCT 208/H ECY 208

45 102 16 29 33,2 21,6 0,915 3 400 2,35 UCT 209/H ECY 209

50 102 16 29 35,1 23,2 0,98 3 300 2,5 UCT 210/H ECY 210

55 130 22 35 43,6 29 1,25 3 000 3,85 UCT 211/H ECY 211

60 130 22 35 52,7 36 1,53 2 700 4,7 UCT 212/H ECY 212

65 151 26 41 57,2 40 1,7 2 350 6,7 UCT 213/H ECY 213

70 151 26 41 62,4 44 1,86 2 250 6,9 UCT 214 ECY 214

75 151 26 41 66,3 49 2,04 2 100 7,2 UCT 215 ECY 215

80 165 26 41 71,5 54 2,2 1 900 8,3 UCT 216 ECY 216

85 173 30 48 83,2 64 2,5 1 800 10,8 UCT 217 ECY 217

20
Dimensions

d A A2 A5 B H H2 L L1 L2 L3 N1 N2 s1

mm

20 32 21 20,5 31 89 51 94 61 10 51 16 32 18,3

25 32 24 20,5 34,1 89 51 97 62 10 51 16 32 19,8

30 37 28 22,5 38,1 102 56 113 70 10 57 16 37,5 22,2

35 37 30 24,5 42,9 102 64 129 78 13 64 16 37,5 25,4

40 49 33 26 49,2 114 83 145 88 16 83 19 49 30,2

45 49 35 26,5 49,2 117 83 145 87 16 83 21 51 30,2

50 49 37 33 51,6 117 83 148 90 16 86 19 49 32,6

55 64 38 37,5 55,6 146 102 172 106 19 95 25 64,5 33,4

60 64 42 39 65,1 146 102 45 119 19 102 32 64,5 39,7

65 70 44 39 68,3 167 111 225 137 21 121 32 70 42,9

70 70 46 41,5 74,6 167 111 225 137 21 121 32 70 44,4

75 70 48 41,5 77,8 167 111 232 140 21 121 32 70 44,5

80 70 51 41,5 82,6 184 111 235 140 21 121 32 70 49,3

85 73 54 43 85,7 198 124 260 162 29 157 38 73 51,6

21
3-bolt bracket flanged ball bearing units, grub screw locking
d 20 – 45 mm

A L A5

s1
d
B

H1
H

J1

G N

A1 J
T L1

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Associated
tolerance h6 end cover
d H1 J J1 C C0 Pu

mm kN r/min kg –

20 42 32 27 12,7 6,7 0,285 6 700 0,59 UCFB 204/H ECY 204

25 45 34 27 14 7,8 0,335 7 000 0,72 UCFB 205/H ECY 205

30 50 40 29 19,5 11,2 0,475 5 000 1,05 UCFB 206/H ECY 206

35 55 46 32 25,5 15,3 0,655 4 300 1,4 UCFB 207/H ECY 207

40 60 50 41 30,7 19 0,8 3 750 1,8 UCFB 208/H ECY 208

45 65 54 43 33,2 21,6 0,915 3 400 2,15 UCFB 209/H ECY 209

22
Dimensions

d A A1 A5 B H L L1 N G s1 T

mm

20 25,5 8 20,5 31 112 64 64 9,5 8 18,3 31,8

25 27 10 20,5 34,1 118 70 66 9,5 8 19,8 34,7

30 30 10 22,5 38,1 137 83 70 9,5 8 22,2 40,9

35 33,5 13 24,5 42,9 144 90 83 9,5 8 25,4 44,4

40 35,5 16 26 49,2 164 100 78 11 10 30,2 51,2

45 37 18 26,5 49,2 176 106 80 11 10 30,2 50,2

23
Short base pillow block ball bearing units, grub screw locking
d 20 – 50 mm

A1

s1
d H
B

H1
G1

A G
J
L

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft
tolerance h6
d H1 J C C0 Pu

mm kN r/min kg –

20 30,2 52 12,7 6,55 0,28 8 500 0,54 UCPA 204/H

25 36,5 56 14 7,8 0,335 7 000 0,76 UCPA 205/H

30 42,8 66 19,5 11,2 0,475 6 300 0,99 UCPA 206/H

35 47,6 80 25,5 15,3 0,655 4 300 1,45 UCPA 207/H

40 49,2 84 30,7 19 0,8 3 750 1,65 UCPA 208/H

45 54,2 90 33,2 21,6 0,915 3 400 1,85 UCPA 209/H

50 57,2 94 35,1 23,2 0,98 3 300 2,25 UCPA 210/H

24
Dimensions

d A A1 B H L G G1 s1

mm – mm

20 34 18 31 62 76 M10 13 18,3

25 40 21 34,1 73 84 M10 13 19,8

30 39 19 38,1 84 93,5 M12 18 22,2

35 42 22 42,9 93 110,5 M14 20 25,4

40 45 27 49,2 98 116 M14 20 30,2

45 45 26 49,2 106 120 M14 25 30,2

50 51 27 51,6 113 130 M16 25 32,6

25
Pillow block ball bearing units, adapter locking
d 20 – 60 mm

J
A1

N1

s1
d H N
B1

H1
H2

A G
J
L

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Adapter
tolerance h6 sleeve1)
d H1 J C C0 Pu

mm kN r/min kg –

20 36,5 105 14 7,8 0,335 5 850 0,82 UKP 205 K/H H 2305

25 42,9 121 19,5 11,2 0,475 5 000 1,25 UKP 206 K/H H 2306

30 47,6 127 25,5 15,3 0,655 4 300 1,6 UKP 207 K/H H 2307

35 49,2 137 30,7 19 0,8 3 750 2,1 UKP 208 K/H H 2308

40 54 146 33,2 21,6 0,915 3 400 2,4 UKP 209 K/H H 2309

45 57,2 159 35,1 23,2 0,98 3 300 2,9 UKP 210 K/H H 2310

50 63,5 171 43,6 29 1,25 3 000 3,75 UKP 211 K/H H 2311

55 69,8 184 52,7 36 1,53 2 700 4,7 UKP 212 K/H H 2312

60 76,2 203 57,2 40 1,7 2 350 6,4 UKP 213 K/H H 2313

1) Order adapter sleeve separately.

26
Dimensions

d A A1 B1 H H2 L N N1 G s12)

mm

20 38 22 35 70,5 16 139,5 18 13 10 20,5

25 45 24 38 83,5 16,5 165 21 17 14 22,5

30 46 27 43 93,5 18,5 166,5 21 17 14 24,8

35 49 29 46 101 20,5 184 21 17 14 27,5

40 51 29 50 108 19 189,5 21 17 14 29

45 56 31 55 116 19 206,5 22 20 16 31,1

50 59 35 59 126 22 219 22 20 16 32,5

55 62 36 62 141,5 22 239,5 25 20 16 33,8

60 72 35 65 153,5 25,5 265 30 25 20 35,3

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

27
Square flanged ball bearing units, adapter locking
d 20 – 60 mm

A
A1 N
A5

s1
d
B1

G
J
L
T

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing Adapter Associated
tolerance h6 unit sleeve1) end cover
d J C C0 Pu

mm kN r/min kg –

20 70 14 7,8 0,335 5 850 0,77 UKF 205 K/H H 2305 ECY 205

25 83 19,5 11,2 0,475 5 000 1,15 UKF 206 K/H H 2306 ECY 206

30 92 25,5 15,3 0,655 4 300 1,45 UKF 207 K/H H 2307 ECY 207

35 102 30,7 19 0,8 3 750 1,9 UKF 208 K/H H 2308 ECY 208

40 105 33,2 21,6 0,915 3 400 2,25 UKF 209 K/H H 2309 ECY 209

45 111 35,1 23,2 0,98 3 300 2,6 UKF 210 K/H H 2310 ECY 210

50 130 43,6 29 1,25 3 000 3,6 UKF 211 K/H H 2311 ECY 211

55 143 52,7 36 1,53 2 700 4,2 UKF 212 K/H H 2312 ECY 212

60 149 57,2 40 1,7 2 350 5,45 UKF 213 K/H H 2313 ECY 213

1) Order adapter sleeve separately.

28
Dimensions

d A A1 A5 B1 L N G s12) T

mm

20 27 13 20,5 35 95 12 10 20,5 36,5

25 30 14 22,5 38 108 12 10 22,5 40,5

30 32 15 24,5 43 118 14 12 24,8 43,8

35 35,5 15 26 46 130 16 14 27,5 48,5

40 38 16 26,5 50 137 16 14 29 51

45 39,5 16 33 55 143 16 14 31,1 53,1

50 43 18 37,5 59 162 19 16 32,5 57,5

55 47,5 18 39 62 175 19 16 33,8 62,8

60 50 22 39 65 187 19 16 35,3 65,3

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

29
Oval flanged ball bearing units, adapter locking
d 20 – 60 mm

A
A1 N

A5

s1
d J H
B1

T L

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft tolerance h6 Ball bearing Adapter Associated
unit sleeve1) end cover
d J C C0 Pu

mm kN r/min kg –

20 99 14 7,8 0,335 5 850 0,67 UKFL 205 K/H H 2305 ECY 205

25 117 19,5 11,2 0,475 5 000 0,97 UKFL 206 K/H H 2306 ECY 206

30 130 25,5 15,3 0,655 4 300 1,25 UKFL 207 K/H H 2307 ECY 207

35 144 30,7 19 0,8 3 750 1,6 UKFL 208 K/H H 2308 ECY 208

40 148 33,2 21,6 0,915 3 400 2 UKFL 209 K/H H 2309 ECY 209

45 157 35,1 23,2 0,98 3 300 2,4 UKFL 210 K/H H 2310 ECY 210

50 184 43,6 29 1,25 3 000 3,3 UKFL 211 K/H H 2311 ECY 211

55 202 52,7 36 1,53 2 700 4 UKFL 212 K/H H 2312 ECY 212

60 210 57,2 40 1,7 2 350 5 UKFL 213 K/H H 2313 ECY 213

1) Order adapter sleeve separately.

30
Dimensions

d A A1 A5 B1 H L N G s12) T

mm

20 27 13 20,5 35 130 68 16 14 20,5 36,5

25 30 13 22,5 38 147,5 80 16 14 22,5 40,5

30 32 14 24,5 43 161 90 16 14 24,8 43,8

35 34 14 26 46 174,5 100 16 14 27,5 48,5

40 35 15 26,5 50 188 108 19 16 29 51

45 39 15 33 55 197 115 19 16 31,1 53,1

50 41,5 18 37,5 59 224 130 19 16 32,5 57,5

55 45 18 39 62 250 140 23 20 33,8 62,8

60 47 20 39 65 258 155 23 20 35,3 65,3

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

31
Round flanged ball bearing units, adapter locking
d 20 – 60 mm

T N
A5

s1
d Da J L
B

A1 J1
A3

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing Adapter Associated
tolerance h6 unit sleeve1) end cover
d Da J J1 C C0 Pu

h8

mm kN r/min kg –

20 70 90 63,6 14 7,8 0,335 5 850 1,05 UKFC 205 K/H H 2305 ECY 205

25 80 100 70,7 19,5 11,2 0,475 5 000 1,35 UKFC 206 K/H H 2306 ECY 206

30 90 110 77,8 25,5 15,3 0,655 4 300 1,7 UKFC 207 K/H H 2307 ECY 207

35 100 120 84,9 30,7 19 0,8 3 750 2,15 UKFC 208 K/H H 2308 ECY 208

40 105 132 93,3 33,2 21,6 0,915 3 400 2,9 UKFC 209 K/H H 2309 ECY 209

45 110 138 97,6 35,1 23,2 0,98 3 300 3,1 UKFC 210 K/H H 2310 ECY 210

50 125 150 106,1 43,6 29 1,25 3 000 4,3 UKFC 211 K/H H 2311 ECY 211

55 135 160 113,1 52,7 36 1,53 2 700 5,1 UKFC 212 K/H H 2312 ECY 212

60 145 170 120,2 57,2 40 1,7 2 350 5,75 UKFC 213 K/H H 2313 ECY 213

1) Order adapter sleeve separately.

32
Dimensions

d A A1 A3 A5 B1 L N G s12) T

mm

20 27,5 7 6 20,5 35 115 12 10 20,5 30,5

25 30 8 8 22,5 38 125 12 10 22,5 32,5

30 32 9 8 24,5 43 135 14 12 24,8 35,8

35 35,5 9 10 26 46 145 14 12 27,5 38,5

40 37,5 14 12 26,5 50 160 16 14 29 39

45 39 14 12 33 55 165 16 14 31,1 41,1

50 43 15 12 37,5 59 185 19 16 32,5 45,5

55 47,5 15 12 39 62 195 19 16 33,8 50,8

60 50 15 14 39 65 205 19 16 35,3 51,3

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

33
Take-up ball bearing units, adapter locking
d 20 – 60 mm

A2 L3 N1 A5
L2

s1
B1
d H H1 N N2 H2

A1 L1
A L

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Adapter Associated
tolerance h6 sleeve1) end cover
d H1 A1 N C C0 Pu

mm kN r/min kg –

20 76 12 19 14 7,8 0,335 5 850 0,84 UKT 205 K/H H 2305 ECY 205

25 89 12 22 19,5 11,2 0,475 5 000 1,3 UKT 206 K/H H 2306 ECY 206

30 89 12 22 25,5 15,3 0,655 4 300 1,7 UKT 207 K/H H 2307 ECY 207

35 102 16 29 30,7 19 0,8 3 750 2,45 UKT 208 K/H H 2308 ECY 208

40 102 16 29 33,2 21,6 0,915 3 400 2,5 UKT 209 K/H H 2309 ECY 209

45 102 16 29 35,1 23,2 0,98 3 300 2,7 UKT 210 K/H H 2310 ECY 210

50 130 22 35 43,6 29 1,25 3 000 4,05 UKT 211 K/H H 2311 ECY 211

55 130 22 35 52,7 36 1,53 2 700 4,8 UKT 212 K/H H 2312 ECY 212

60 151 26 41 57,2 40 1,7 2 350 6,8 UKT 213 K/H H 2313 ECY 213

1) Order adapter sleeve separately.

34
Dimensions

d A A2 A5 B1 H H2 L L1 L2 L3 N1 N2 s12)

mm

20 32 24 20,5 35 89 51 97 62 10 51 16 32 20,5

25 37 28 22,5 38 102 56 113 70 10 57 16 37,5 22,5

30 37 30 24,5 43 102 64 129 78 13 64 16 37,5 24,8

35 49 33 26 46 114 83 145 88 16 83 19 49 27,5

40 49 35 26,5 50 117 83 145 87 16 83 21 51 29

45 49 37 33 55 117 83 148 90 16 86 19 49 31,1

50 64 38 37,5 59 146 102 172 106 19 95 25 64,5 32,5

55 64 42 39 62 146 102 194 119 19 102 32 64,5 33,8

60 70 44 39 65 167 111 225 137 21 121 32 70 35,3

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

35
3-bolt bracket flanged ball bearing units, adapter locking
d 20 – 40 mm

A L A5

s1
d
B1

H1
H

J1

G N

A1 J
T L1

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Adapter Associated
tolerance h6 sleeve1) end cover
d H1 J J1 C C0 Pu

mm kN r/min kg –

20 45 34 27 14 7,8 0,335 5 850 0,69 UKFB 205K/H H 2305 ECY 205

25 50 40 29 19,5 11,2 0,475 5 000 1,1 UKFB 206 K/H H 2306 ECY 206

30 55 46 32 25,5 15,3 0,655 4 300 1,5 UKFB 207 K/H H 2307 ECY 207

35 60 50 41 30,7 19 0,8 3 750 1,95 UKFB 208 K/H H 2308 ECY 208

40 65 54 43 33,2 21,6 0,915 3 400 2,3 UKFB 209 K/H H 2309 ECY 209

1) Order adapter sleeve separately.

36
Dimensions

d A A1 A5 B1 H L L1 N G s12) T

mm

20 27 10 20,5 35 118 70 66 9,5 8 12 34,7

25 30 10 22,5 38 137 83 70 9,5 8 22,5 41,2

30 33,5 13 24,5 43 144 90 83 9,5 8 24,8 43,8

35 35,5 16 26 46 164 100 78 11 10 27,5 48,5

40 37 18 26,5 50 176 106 80 11 10 29 49

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

37
Short base pillow block ball bearing units, adapter locking
d 20 – 45 mm

A1

s1
d H
B1

H1
G1

A G
J
L

Principal dimensions Basic load ratings Fatigue load Limiting speed Mass Designations
dynamic static limit with shaft Ball bearing unit Adapter
tolerance h6 sleeve1)
d H1 J C C0 Pu

mm kN r/min kg –

20 36,5 56 14 7,8 0,335 5 850 0,82 UKPA 205K/H H 2305

25 42,8 66 19,5 11,2 0,475 5 000 1,05 UKPA 206K/H H 2306

30 47,6 80 25,5 15,3 0,655 4 300 1,5 UKPA 207 K/H H 2307

35 49,2 84 30,7 19 0,8 3 750 1,75 UKPA 208 K/H H 2308

40 54,2 90 33,2 21,6 0,915 3 400 2 UKPA 209 K/H H 2309

45 57,2 94 35,1 23,2 0,98 3 300 2,45 UKPA 210 K/H H 2310

1) Order adapter sleeve separately.

38
Dimensions

d A A1 B1 H L G G1 s12)

mm – mm

20 40 21 35 73 84 M10 13 12

25 39 19 38 84 93,5 M12 18 14

30 42 22 43 93 110,5 M14 20 24,8

35 45 27 46 98 116 M14 20 27,5

40 45 26 50 106 120 M14 25 29

45 51 27 55 113 130 M16 25 31,1

2) Values for s1 are valid before the sleeve is driven into the bearing bore (sleeve and inner ring at starting position).

39
skf.com
® SKF is a registered trademark of the SKF Group.

© SKF Group 2019

The contents of this publication are the copyright of the publisher and may not be reproduced (even
extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy
of the information contained in this publication but no liability can be accepted for any loss or damage
whether direct, indirect or consequential arising out of the use of the information contained herein.
PUB BU/P2 17987/2 EN · November 2019
Certain image(s) used under license from Shutterstock.com.