Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    VM-5U Dual Seismic Monitor

    Uploaded by

    Rafly Riduan
    This document summarizes the VM-5U Dual Seismic Monitor, which monitors bearing vibration in rotating machinery using contact velocity transducers. It displays vibration measurements and alarm levels on individual LCDs for each channel. It can set alert and danger alarm levels independently to detect failures early and notify operators. It also has self-diagnostic functions to prevent shutdowns from false transducer failures. Main functions include the display, alarm functions with adjustable delay times, self-diagnostics, recorder and monitor outputs, and a sequence function to temporarily mute alarms during startups.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    VM-5U Dual Seismic Monitor

    Uploaded by

    Rafly Riduan
    56 views2 pages
    This document summarizes the VM-5U Dual Seismic Monitor, which monitors bearing vibration in rotating machinery using contact velocity transducers. It displays vibration measurements and alarm levels on individual LCDs for each channel. It can set alert and danger alarm levels independently to detect failures early and notify operators. It also has self-diagnostic functions to prevent shutdowns from false transducer failures. Main functions include the display, alarm functions with adjustable delay times, self-diagnostics, recorder and monitor outputs, and a sequence function to temporarily mute alarms during startups.

    Original Description:

    monitor system shinkawan VM-5U

    Original Title

    Vm-5u

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the VM-5U Dual Seismic Monitor, which monitors bearing vibration in rotating machinery using contact velocity transducers. It displays vibration measurements and alarm levels on individual LCDs for each channel. It can set alert and danger alarm levels independently to detect failures early and notify operators. It also has self-diagnostic functions to prevent shutdowns from false transducer failures. Main functions include the display, alarm functions with adjustable delay times, self-diagnostics, recorder and monitor outputs, and a sequence function to temporarily mute alarms during startups.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    56 views2 pages

    VM-5U Dual Seismic Monitor

    Uploaded by

    Rafly Riduan
    This document summarizes the VM-5U Dual Seismic Monitor, which monitors bearing vibration in rotating machinery using contact velocity transducers. It displays vibration measurements and alarm levels on individual LCDs for each channel. It can set alert and danger alarm levels independently to detect failures early and notify operators. It also has self-diagnostic functions to prevent shutdowns from false transducer failures. Main functions include the display, alarm functions with adjustable delay times, self-diagnostics, recorder and monitor outputs, and a sequence function to temporarily mute alarms during startups.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    VM-5 Series

    VM-5U Dual Seismic Monitor


    This is a highly reliable dual channel seismic monitor which monitors the bearing
    vibration of rotating machinery detected by a contact velocity vibration transducer.
    Both a 10-slot rack mounting type and a single-unit independent type with a built-in
    power supply are available so that it can respond flexibly to any system design from
    medium and small scale rotating machinery to TSI.
    The monitor inputs signals from the CV Series Velocity Transducers and displays them
    on LCD.
    It can also set alert and danger alarm levels independently to detect machine failures
    early on and inform the operator of these failures.
    It has a built-in self-diagnostic function to inform the operator of input transducer
    failures, thereby preventing rotating machinery from false shutdowns.

    ■ Main Functions
    1. Display function 5. Monitor output
    Vibration measured value and alarm level setting value are normally Vibration waveform signal is output from BNC connectors (on the front
    displayed on individual LCD for each channel. panel) and terminal board (on the rear panel) via a buffer amplifier for
    vibration analysis.
    2. Alarm function
    ALERT alarm, DANGER alarm and input abnormal alarm are contact- 6. Recorder output
    output and displayed on LED. An analog signal proportional to the vibration is output from the terminal
    block on the rear panel.
    3. Alarm delay time variable function
    Alarm delay time can be adjusted from 0 to 6 sec. to prevent false alarm 7. Sequence function
    output caused by noise, etc. Internal gain is changed by inputting an external contact signal when
    rotating machinery is started, and thus no alarm signal is temporarily
    4. Self-diagnostic function output.
    Any failures in the input system, such as sensor break or imperfect
    connections are detected, then an input abnormal alarm is contact-output 8. DANGER bypass function
    and simultaneously, ALERT and DANGER alarm circuits are cut off. When the alarm setpoint is changed during operation, alarm output is
    disconnected so that no alarm is output by mistake.

    ■ Specifications
    Input Alarm
    Transducer input ■ CV-85, CV-86, CV-87 Alarm set point ■ 4 points (DANGER 1, ALERT 1, DANGER 2, ALERT 2)
    ■ Number of input points : 2 points Alarm set range ■ 0 to 110% of monitor range
    Input impedance ■ Approx. 10kΩ Alarm set accuracy ■ ±1.0% of F.S. or less
    External contact input ■ Contact type: Dry contact Alarm set repeatability ■ ±0.1% of F.S. or less
    (from rear panel) ■ Contact for external reset Alarm output ■ 5 points (DANGER 1, ALERT 1, DANGER 2, ALERT 2, OK)
    ■ Contact for sequence or 6points (DANGER 1, ALERT1, DANGER 2, ALERT 2,
    OK1, OK2)
    I/O conversion
    Recorder output conversion accuracy Display
    ■ ±0.5% of F.S. at calibration frequency at 25°C (77°F), Measured value
    ±2.0% of F.S. at calibration frequency at 0 to 65°C (32 to ■ LCD digital meter with 5 digits (7 segments with back light)
    149°F) (the calibration frequency is determined by the cut-off LCD bar graph meter (40 segments with back light)
    frequency range.) * Measurment value and alarm set value are indicated on the
    Bar graph meter ■ Recorder output conversion accuracy ±2.5% of F.S. digital meter and bar graph meter simultaneously.
    Diqital meter ■ Recorder output conversion accuracy ±1.0% of F.S. Alarm indicator ■ DANGER : (red LED) ALERT : (yellow LED)
    ABNOR. alarm indicator
    Output ■ OK : (green LED)
    Recorder output ■ Voltage or current output proportional to monitor range Bypass indicator ■ BYPASS: (red LED)
    (from rear panel) 1 to 5VDC (output impedance : 250Ω)
    4 to 20mADC (max. load resistance : 500Ω) Others
    0 to −10VDC*, 0 to10VDC*, 0 to −5VDC*, Temperature range ■ Operating temperature : 0 to 65°C (32 to 149°F)
    0 to 5VDC* (output impedance:100Ω) ( * option) Storage temperature : −30 to +85°C (−22 to +185°F)
    Number of output points : 2 points Relative humidity : 20 to 95% RH (noncondensing)
    Monitor output ■ Input signal is output via a buffer amplifier. Material and finish ■ Face plate : Aluminum Munsell N-4.0 (equiv.)
    (from front, rear panel) Signal level : ±15V Output impedance : 100Ω Mass ■ Monitor: max. 0.7kg
    (including single unit instrument rack: max. 2.5kg)
    ■ Model Code No.

    Outline Drawing

    You might also like