IC5100 / Flex5100: #Jufmibtbwbsjfuzpgqbznfoutpmvujpot Upcfpggfsfeupjuthmpcbmdmjfout

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

IC5100 / Flex5100

CPU Mips 32bits processor, Clocked at 96Mhz


Flash Memory 16/32MB Flash Program ROM
Working Memory 16/32MB of Working RAM
SRAM 2MB SRAM With Battery Backup (Option)
RTC Real Time Clock (Battery Operated)
LCD Graphics LCD Display 128 x 64 Dots / Icon Display
(240 x 160 Dots Option)
Contactless card reader Option (Mifare, Type A&B, RFID Support) #JUFMIBTBWBSJFUZPGQBZNFOUTPMVUJPOT
IC Card
MSR
Smart Card with 2SAM Interface
ISO 7811 Track 1&2 (2&3 or Triple Track Option)
UPCFPGGFSFEUPJUTHMPCBMDMJFOUT
RF Modem GSM/GPRS/CDMA/3G modem module with 2SIM
Buzzer Used PWM Generator (Various Sound Selection)
Printer Thermal Line Printing, Number of Dots : 384 Dots
Resolution 8Dots/mm, Printing Speed 75mm/s
USB/RS-232 USB/Up to 460,800bps Serial Port
Battery 8.4V Li-ion 1100mAh
Power Supply 85 to 265 Volt AC 50/60Hz (SMPS Free Voltage AC/DC Adapter)

IC3500

CPU ARM 32bits Secure processor 400Mhz


Flash Memory 32/64MB Flash ROM (or 128MB NAND Option)
Working Memory 64/128MB SDRAM
SRAM Optional 2MB Battery Backup SRAM
LCD 480 x 272 TFT LCD with Resistive Touch Screen
Contactless Card Reader EMV L1 Certification
Option (Mifare, Type A&B, RFID, Felica Support)
IC Card 1Smart Card with 2SAM Interface, EMV L1/L2 V4.3 Certification
MSR ISO 7811 Triple Track
RF Modem Optional GSM/GPRS/CDMA/3G/WiFi/Bluetooth/LTE Modem Module with 2SIM
Buzzer/Voice PWM, Optional Voice Output
Printer 2” Thermal Printing, 432 Dots 200m/sec Jam Free Auto Paper Cutter
Head Life 50kms/100 Million Pulses 50mm Paper Roll
Modem/LAN Applicable for EFT POS Terminal of ISO8583
56K Modem (Async & Sync Support) & Option 10/100 Ethernet
RS-232/USB Up to 460,800bps one General Purpose Serial Port & USB Host & Device Port
Power Supply 85 to 265 Volt AC 50/60Hz (SMPS Free AC/DC Adapter)
Security PCI PTS 4.x Approved

Flex6000

CPU Mips 32bits processor, Clocked at 96Mhz


Flash Memory 16MB Flash Program ROM
Working Memory 16MB SDRAM (Optional 2MB SRAM)
LCD Graphics LCD Display 128 x 64 Dots
Contactless Card Reader Option (Mifare, Type A&B, RFID, Felica Support)
IC Card 1Smart Card with 2SAM Interface, EMV L1/L2 V4.3 Approved
MSR ISO 7811 Track 1&2 (2&3 or Triple Track Option)
RS-232/USB Up to 460,800bps, One General Purpose Serial Port/USB
Power Supply 5V or 12V DC Power Input Option with RS232 Signal Level Output
Security Fully Support 3DES Standard Master/Session and DUKPT Key Management Method
DES, 3DES, RSA, AES and Other Algorithms Support

4F. Gangnam-Paragon S dong, 338, Hakdong-ro, Gangnam-Gu, Seoul, 06099, KOREA. www.bitelpos.com
Contact us at : [email protected]
IC3100 / IC3300 / IC3600 / IC3700

Bitel is an international manufacturer of EFT-POS (Point of Sale) and PDA (Personal Digital Assistant) terminals used
in many different leading industries, including but not limited to retail, banking and government-related industries worldwide.

Founded in South Korea in 1992, Bitel Corporation has provided Electronic Fund Transfer terminals now in use all over
the world. Honored as an innovator and certified by the Korean Government, Bitel’s extensive R&D has been awarded
patents and certifications for applications and individual products continuously throughout the years.
Impressive worldwide sales of our products have enabled Bitel to enter vast markets and
maintain a clear advantage in terms of price, technology and service.
IC3700
Our mission is to deliver products and services to a full spectrum of organizations and establishments,
CPU Mips 32bit Processor, Clocked at 96Mhz with Cryptography Engine ARM 32bit Secure Processor 400Mhz
whether retail or wholesale, by offering the highest quality at the most competitive prices.
Flash Memory 16/32MB Flash Program ROM (32MB Option) 32/64MB Flash ROM (or 128MB NAND Option)

Bitel’s Flex and IC products are considered the most reliable POS and PDA terminals on the market backed by a generous warranty. Working Memory 16/32MB SDRAM (Optional 2MB Battery backup SRAM) 32MB SDRAM(Optional 2MB Battery backup SRAM)
LCD Graphics LCD Display 128 x 64 Dots, LED Backlight B/W 128 x 64
All products are manufactured in South Korea by our company-owned factory and are held to the highest international standards.
Optional 480 x 320 TFT LCD with Resistice Touch Screen
Thank you for your interest. For more information about our company or products, please visit our website at www.bitelpos.com. Contactless Card Reader Option (Mifare, Type A&B, RFID Support) Option (Mifare, Type A&B, RFID, Felica Support)
IC Card 1Smart Card with 4SAM Interface, EMV L1/L2 V4.3 Approved 1Smart Card with 2SAM Interface, EMV L1/L2 V4.3 Certification
You will find a list of our products and their specifications. For inquiries, please email us [email protected]
MSR ISO7811 Track 1&2 (2&3 or Triple Track Option) ISO7811Triple Track
RF Modem Optional CDMA/GSM/GPRS/3G/WiFi/Bluetooth Optional CDMA/GSM/GPRS/3G/WiFi/Bluetooth/LTE Modem Module whit 2SIM
Buzzer Used PWM Generator(Various Sound Selection) PWM, Optional Voice Output
Printer 2” Thermal Line Printing 384 Dots jam free. 2” Thermal Line Printing 384 Dots jam free.
Head Life 50kms/100 Million Pulses 50mm Paper Roll Head Life 50kms/100 Million Pulses 38mm Paper Roll
Modem/LAN Applicable for EFT POS Terminal of IOS8583 Applicable for EFT POS Terminal of IOS8583
56K Modem(Async & Sync Support) 56K Modem(Async & Sync Support)
Multi Mode CCITT V.92/V90/V.34/V.32bis/V.22bis/V.22/V.21/V.23 Multi Mode CCITT V.92/V90/V.34/V.32bis/V.22bis/V.22/V.21/V.23
Simultaneously Applicable to Bell Mode, Option 10/100 Ethernet Simultaneously Applicable to Bell Mode, Option 10/100 Ethernet
RS-232/USB Up to 460,800bps One or Two General Purpose Serial Port & USB device Port Up to 460,800bps One General Purpose Serial Port & USB device Port
Power Supply 85 to 265 Volt AC 50/60Hz, SMPS Free Voltage AC/DC Adapter. 85 to 265 Volts AC 50/60Hz. (SMPS Free AC/DC Adapter)
Security

IC5500 / IC5510
IC5500 IC5510
CPU ARM 32bits Secure Processor 400 Mhz
Flash Memory 32/64MB Flash Program ROM
Working Memory 32/64/128MB SDRAM (Option)
LCD B/W LCD Display 128 x 64 with LED Backlight
(IC5510 : TFT LCD Display 320 x 240)
Contactless Card Reader Option (Mifare, Type A&B, RFID, Felica Support)
IC Card Smart Card with 1SAM Interface, EMV L1/L2 V4.3 Compliant
MSR Triple Track
CPU Samsung CPU 533Mhz(1Ghz Option) Samsung CPU (ARM Cortex A8)1Ghz
RF Modem Wifi/Bluetooth/GSM/GPRS
Flash Memory 256/512MB 256/512MB
Battery 4.2V Li-ion 1100mAh
Working Memory Mobile SDRAM 256/512MB Mobile SDRAM 256/512MB Power Supply USB
SD Card T-Flash Card Interface Socket T-Flash Card Interface Socket Security PCI-PTS V4.0 Approved
LCD 320 x 240 TFT LCD 480 x 320 TFT LCD
Contactless Card Reader Option (Mifare, Type A&B, RFID Support) Option (Mifare, Type A&B, RFID Support) IC5200
IC Card Smart Card with 2SAM Interface Smart Card with 2SAM Interface
MSR ISO7811 Track 1&2 (2&3 or Triple Track Option) - IC5200
RF Modem GSM/GPRS/CDMA/3G Modem Module with 2SIM GSM/GPRS/CDMA/3G Modem Module with 2SIM CPU ARM 32bits Secure Processor 400 Mhz
WiFi/Bluetooth WiFi/Bluetooth Flash Memory 32/64MB Flash ROM(or 128MB NAND Option)
Printer Thermal Line Printing, Number of Dots : 384 Dots - Working Memory 32/64MB SDRAM
SRAM Optional 2MB Battery Backup SRAM
Resolution 8Dots/mm, Printing Speed 75mm/s
LCD Graphics LCD Display 128x 64 Dots/Icon Display(240 x 160 Dots Option)
Button Various Function Key Various Function Key
with Resistive Touch Screen(Optional TFT LCD Display 320 x 240)
RS-232/USB USB2.0/Up to 460,800bps Serial Port USB2.0/Up to 921,600bps Serial Port Contactless Card Reader Option (Mifare, Type A&B, RFID, Felica Support)
Bar Code Scanner 2D(1D) Type Barcode Reader 2D(1D) Type Barcode Reader IC Card Smart Card with 2SAM Interface EMV L1/L2 V4.3 Certification
Camera 2M Pixel with Flash LED 2M Pixel with Flash LED MSR ISO7811 Triple Track
GPS (Option) Standalone GPS & GALILEO with intenna Standalone GPS & GALILEO with intenna RF Modem Optional GSM/GPRS/CDMA/3G/Wifi/Bluetooth/ LTE Modem Module with 2SIM
Printer 2” Thermal Printing. 384 Dots 200m/sec jam free Auto paper cutter
Battery 8.4V Li-ion 2200mAh 4.2V Li-ion 2200mAh
Head Life 50kms/100 Million Pulses 30mm Paper Roll
Power Supply 85 to 265 Volts AC 50/60Hz (SMPS Free Voltage AC/DC Adapter) 85 to 265 Volts AC 50/60Hz (SMPS Free Voltage AC/DC Adapter)
Battery 8.4V Li-ion 1100mAh
Power Supply 85 to 265 Volts AC 50/60Hz (SMPS Free AC/DC Adapter)

You might also like