Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Crystalbond G500: Crystallization Penetrating Aids and Waterproofing of Old or New Concrete System

    Uploaded by

    HHT
    Crystalbond G500 is an inorganic crystalline waterproofing system for concrete. It penetrates deeply into concrete pores to form insoluble calcium silicate crystals, sealing pores and preventing water penetration from either direction. It can be applied to new or old concrete by spray, roller, or brush. Crystalbond G500 waterproofs concrete against hydrostatic pressure without changing the concrete appearance. It provides effective long-term waterproofing through its ability to crystallize within concrete pores.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Crystalbond G500: Crystallization Penetrating Aids and Waterproofing of Old or New Concrete System

    Uploaded by

    HHT
    43 views2 pages
    Crystalbond G500 is an inorganic crystalline waterproofing system for concrete. It penetrates deeply into concrete pores to form insoluble calcium silicate crystals, sealing pores and preventing water penetration from either direction. It can be applied to new or old concrete by spray, roller, or brush. Crystalbond G500 waterproofs concrete against hydrostatic pressure without changing the concrete appearance. It provides effective long-term waterproofing through its ability to crystallize within concrete pores.

    Original Description:

    Crystal bond waterproofing

    Original Title

    Crystalbond-G500

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Crystalbond G500 is an inorganic crystalline waterproofing system for concrete. It penetrates deeply into concrete pores to form insoluble calcium silicate crystals, sealing pores and preventing water penetration from either direction. It can be applied to new or old concrete by spray, roller, or brush. Crystalbond G500 waterproofs concrete against hydrostatic pressure without changing the concrete appearance. It provides effective long-term waterproofing through its ability to crystallize within concrete pores.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views2 pages

    Crystalbond G500: Crystallization Penetrating Aids and Waterproofing of Old or New Concrete System

    Uploaded by

    HHT
    Crystalbond G500 is an inorganic crystalline waterproofing system for concrete. It penetrates deeply into concrete pores to form insoluble calcium silicate crystals, sealing pores and preventing water penetration from either direction. It can be applied to new or old concrete by spray, roller, or brush. Crystalbond G500 waterproofs concrete against hydrostatic pressure without changing the concrete appearance. It provides effective long-term waterproofing through its ability to crystallize within concrete pores.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Your Trusted Construction Partner

    Crystalbond G500
    Crystallization Penetrating Aids and Waterproofing of Old or New Concrete
    System

    Description Physical Properties

    Crystalbond G500 crystalline capillary waterproofing system The values given below are average figures achieved in
    is a product which contains a blend of selected inorganic laboratory test. Actual values obtained on site may show
    crystals, penetrating aids and defoamers formulated for minor variations from those quoted.
    application by spray, roller or brush.
    Appearance and odor Clear and colourless
    ƌLJƐƚĂůďŽŶĚ 'ϱϬϬ when applied to aged or green No odour. Non toxic
    concrete penetrates deeply into the capillary pores of the Specific Gravity 1.3
    concrete, reacts with free lime within the concrete to make Solubility in Water 100% soluble
    a calcium silicate gel (CSH) that is insoluble. Solid Content 30 – 35%
    Permeability-Pressure @ 5 bar (51.02m head of
    ƌLJƐƚĂůďŽŶĚ 'ϱϬϬ stops water from either the positive or Applied on Positive Side water) = 0 permeability
    negative side of the concrete slab when the seepage is not (ASTM D5084-90) (water tight)
    caused by cracking or other structural flaws. In addition, Permeability-Pressure @ 5 bar (51.02m head of
    ƌLJƐƚĂůďŽŶĚ 'ϱϬϬ also aids in abatement of dampness Applied on Negative Side water) = 0 permeability
    odors caused by bacteria in ground water or flood water. (ASTM D5084-90Per) (water tight)
    Hydrostatic Pressure @ 3 bar (30m head of
    Uses Resistance water) = 0 leakage (water
    (USACE CRD C48 – 73) tight)
    rystalbond G500 is used for waterproofing new or aged Absorption 7 Days = less than 2%
    concrete against either positive or negative hydrostatic (ASTM C642)
    water pressure. 2
    Compressive Strength at 7 Control : 25 N/mm
    2
    Days Treated : 36 N/mm
    Crystalbond G500 penetrates deeply (2–10 mm)
    (ASTM C42)
    into capillary voids and pores of the concrete and
    Efflorescence Reduction No change to treated
    “crystallize” as part of the concrete. It is a concrete
    Fresh Concrete concrete.
    treatment and not a surfaces coating. It does not change
    (ASTM C67 – 75 )
    the appearance of the concrete and it will not
    discolour or separate. Crystalbond G500 works equally
    well on old or new concrete, above or below grade, and is
    Application Instruction
    intended for use on poured in place walls, preformed tilt-
    ups, bridges, road surfaces, pipes, basement walls,
    foundations, sidewalks and slab.
    Surface Preparation

    Surface must be able to absorb water, to be able to absorb.


    Advantages Crystalbond G500 Surface may be wet, moist or dry, but
    not having puddles or running water.
    • Easily apply by spray, brush or roller to new or aged
    concrete Concrete surfaces must be clean, sound and free of oil, dirt,
    laitance and any other such contaminations which may
    • Effective waterproofing system in sealing, hardening,
    and dust-proofing of concrete surfaces. interfere with the application process.
    • Can be applied to damp concrete with no standing
    High pressure water jetting is the preferred method of
    water.
    surface preparation because mechanical cleaning, surfaces
    • Penetrate deeply into capillary voids and pores and
    saturation and substrate roughing are simultaneously
    crystallize as part of concrete.
    achieved.
    • Protect concrete surfaces from abrasion, freeze-thaw
    damage and chloride ion intrusion.
    • Cost effective way of waterproofing system
    • Prevents efflorescence, which will improve the
    bonding of cementitious toppings, coating and
    paints.
    Your Trusted Construction Partner

    Application Method Technical Support

    Wet the surface before applying Crystalbond G500 to Easy-Fix Technical Service Department is available to assist
    allow its penetration. Thoroughly mix Crystalbond G500 you in the correct use of our products
    before applying by airless sprayer, hand-pump-type
    garden sprayer, roller, brush or squeegee.
    Storage
    Agitate while applying to keep ingredients in suspension and
    from setting out. If Crystalbond G500 puddles or beading Crystalbond G500 should be stored in original
    is present, blow off with air, squeegee, and wipe up with unopened packaging in dry conditions.
    cloth.
    Crystalbond G500 has a shelf life of 24 months.
    Do not allow any Crystalbond G500 to dry on surfaces, as it
    will cure into a hard white crystal powder that requires
    power grinding to remove. Precautions

    After application, flush the treated surface with plenty of Wear suitable protective clothing, gloves, eye protection
    water for curing and also to remove excess Crystalbond and respiratory protective equipment.
    G500.
    In case of contact with eyes, rinse immediately with plenty
    of clean water and seek medical advice. If swallowed. Seek
    Curing and Additional Waterproofing System medical attention immediately do not induce vomiting.

    Crystalbond G500 will penetrate and form crystal


    gradually in pores and voids in concrete.

    In some circumstances, where additional waterproofing


    membrane system, such as Flexibond 203, Bituflex, Bituflex
    SM etc, were to apply on top of Crystalbond G500, allow the
    later to cure for at least seven (7) days, before proceed with
    the additional waterproofing system.

    Limitations

    Apply at temperatures between 27 - 35°C. Do not apply to


    glass, aluminium, porcelain, enamel, clay brick or other clay
    based products. Do not apply on painted surfaces.

    Packing & Size


    Crystalbond G500 20 litre and 200 litre drum

    Coverage
    2
    Crystalbond G500 5m /litre for rough surface
    2
    10m /litre for smooth surface

    Important Notes: website: www.easy-fix.com.my


    This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories.
    However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability,
    either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification,
    and recommendation of information given by us, the user is responsible for checking the suitability of these products for its intended use.

    You might also like