Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    Sikatop 122 F: Fibre Reinforced, Polymer Modified Repair Mortar

    Uploaded by

    Tiger Cage
    sikatop datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sikatop 122 F: Fibre Reinforced, Polymer Modified Repair Mortar

    Uploaded by

    Tiger Cage
    88 views3 pages
    sikatop datasheet

    Original Title

    ng-np-sikatop-122f

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    sikatop datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views3 pages

    Sikatop 122 F: Fibre Reinforced, Polymer Modified Repair Mortar

    Uploaded by

    Tiger Cage
    sikatop datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Product Data Sheet

    Edition 12/12/2005
    Identification no. PM-13

    SikaTop® 122 F
    Fibre Reinforced, Polymer Modified Repair Mortar

    Product SikaTop®-122 F is a cementitious, polymer modified, 2-component repair mortar


    Description with added polyamide fibres. When mixed together, the components react to
    Construction

    form a high strength repair and levelling mortar for concrete.


    Suitable for use in tropical and hot climatic conditions.
    Uses SikaTop®-122 F is used as an economical and easy to use concrete repair
    mortar, suitable for:
    Repairs to basements, slabs, water tanks and swimming pools etc.
    Making good damaged edges
    Repairing honeycombing and concrete repair in general
    Advantages SikaTop®-122 F provides the following beneficial properties:
    Rapid strength gain
    Good water and oil resistance
    High final strengths
    High abrasion resistance
    Good adhesion
    Non toxic - suitable for contact with drinking water
    Test Report WRC, Water Byelaws Scheme, (BS 6920), UK
    DWI, Drinking Water Inspectorate approval for contact with potable water, UK

    Product Data
    Type Cementitious powder, polymer dispersion
    Form Component A: White Liquid
    Component B: Grey Powder
    Packaging 35 kg set (A+B)
    Storage Condition Store in a dry area between 5ºC and 35ºC. Protect from direct sunlight
    Shelf life 12 months minimum from production date if stored properly in original unopened
    packaging

    Technical Data
    Mixing ratio Component A : B = 1: 6 (5kg of liquid A + 30kg of powder B)
    Pot life (30°C) Approximately 15 minutes
    Density Approximately 2.00 kg/lt (Fresh mortar)
    Mechanical strengths Compressive strength 40 - 45 N/mm2
    (28 days), Flexural strength 12 - 15 N/mm2
    Adhesion > 2.0 N/mm2 (concrete failure)

    SikaTop® -122 F 1/3


    Modulus of elasticity Approximately 20’000 N/mm2
    (static)
    Co-efficient of Approximately 14.10-6 m/m per °C
    thermal expansion
    Index of H2O vapour µH2O - approximately 500
    diffusion

    Index of CO2 diffusion µCO2 - approximately 40,000


    Yield Approximately 17.5 litres per 35 kg set
    Layer Thickness Minimum 10 mm, Maximum 20 mm per application
    Temperature Minimum 80C, Maximum 400C (substrate)

    Application Details
    Substrate preparation Substrate must be sound, free from dust, loose particles, cement laitance, curing
    compounds, oil, grease or any other contamination.
    Metal surfaces (steel and iron) should be free from rust, scale, oil and grease.
    Pre-wet substrate to a saturated surface dry condition (SSD) prior to
    application. Avoid puddles and standing water.
    Mixing Stir component A (liquid) thoroughly before pouring into a clean mixing container.
    Add component B (powder) slowly while mixing continuously. Use low speed
    electric mixers (maximum. 500 rpm) for 3 minutes avoiding entrapment of air.
    By adding the powder in portions, the desired application consistency can be
    obtained.
    Application Use Sika MonoTop-610, SikaTop Armatec 110 EC or a slurry made from
    SikaTop®-122 F (A:B = 1:3 by volume) as a bonding agent.
    While the bonding agent is still wet, apply SikaTop®-122 F to a maximum
    thickness of 20 mm and compact by trowel. For a thickness greater than 20 mm,
    apply in several layers.
    As soon as the mortar has started to set it can be smoothed by wooden or
    synthetic float, styrofoam block or sponge.
    For a very fine surface finish, SikaRep Fine or Sika Monotop-625 can be applied
    over the SikaTop®-122 F.
    Curing Where ambient conditions may lead to rapid surface drying, the use of light
    water fogging for 48 hours or a suitable water based curing compound (Sika
    Antisol E) is recommended. Do not commence fogging until final set has been
    reached.
    Cleaning Application and mixing tools should be cleaned with water while material is still
    fresh. Hardened material can only be removed mechanically.
    Remarks Do not add water for mixing!
    Sika Monotop-612 is the equivalent 1-component repair mortar.
    At ambient temperatures above 35°C, SikaTop®-122 F components A & B
    should be stored in an airconditioned shed.
    SikaTop®-122 F may be overcoated with Sikagard ElastoColor W, Sikagard-
    680 S, Sikagard-550 W Elastic and all SikaRep and MonoTop products.
    Notes All technical data stated in this Product Data Sheet are based on laboratory tests.
    Actual measured data may vary due to circumstances beyond our control.

    SikaTop® -122 F 2/3


    Safety For information and advice on the safe handling, storage and disposal of
    chemical products, users should refer to the most recent Material Safety Data
    Sheet containing physical, ecological, toxicological and other safety-related
    data.

    Legal Notes
    The information, and, in particular, the recommendations relating to the application
    and end-use of Sika products, are given in good faith based on Sika’s current
    knowledge and experience of the products when properly stored, handled and
    applied under normal conditions in accordance with Sika’s recommendations. In
    practice, the differences in materials, substrates and actual site conditions are
    such that no warranty in respect of merchantability or of fitness for a particular
    purpose, nor any liability arising out of any legal relationship whatsoever, can be
    inferred either from this information, or from any written recommendations, or
    from any other advice offered. The user of the product must test the product’s
    suitability for the intended application and purpose. Sika reserves the right to
    Construction

    change the properties of its products. The proprietary rights of third parties must
    be observed. All orders are accepted subject to our current terms of sale and
    delivery. Users must always refer to the most recent issue of the local Product
    Data Sheet for the product concerned, copies of which will be supplied on
    request.

    Sika Gulf B.S.C (c)


    Bldg. 925, Road 115, Sitra Area 601
    P.O. Box 15776
    Adliya, Kingdom of Bahrain
    TEl.:+973 17738 188
    Fax:+973 17732 476
    E-mail:[email protected]
    Web: http//www.sika.com.bh

    SikaTop® -122 F 3/3

    You might also like